bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Long thermistor tables need special consideration

Browse Source
This commit is contained in:
Scott Lahteine 2018-05-28 06:18:11 -05:00
parent a4f9c3373f
commit 853a9056ac
2 changed files with 13 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/module/temperature.cpp
View File

@ -54,10 +54,10 @@
#if HOTEND_USES_THERMISTOR
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
static void* heater_ttbl_map[2] = { (void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE };
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
static constexpr uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
#else
static void* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS((void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE, (void*)HEATER_2_TEMPTABLE, (void*)HEATER_3_TEMPTABLE, (void*)HEATER_4_TEMPTABLE);
static uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN, HEATER_3_TEMPTABLE_LEN, HEATER_4_TEMPTABLE_LEN);
static constexpr uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN, HEATER_3_TEMPTABLE_LEN, HEATER_4_TEMPTABLE_LEN);
#endif
#endif

17
Marlin/src/module/thermistor/thermistors.h
View File

@ -184,21 +184,26 @@
#ifdef THERMISTORBED
#define BEDTEMPTABLE TT_NAME(THERMISTORBED)
#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
#else
#ifdef HEATER_BED_USES_THERMISTOR
#elif defined(HEATER_BED_USES_THERMISTOR)
#error "No bed thermistor table specified"
#endif
#else
#define BEDTEMPTABLE_LEN 0
#endif
#ifdef THERMISTORCHAMBER
#define CHAMBERTEMPTABLE TT_NAME(THERMISTORCHAMBER)
#define CHAMBERTEMPTABLE_LEN COUNT(CHAMBERTEMPTABLE)
#else
#ifdef HEATER_CHAMBER_USES_THERMISTOR
#elif defined(HEATER_CHAMBER_USES_THERMISTOR)
#error "No chamber thermistor table specified"
#endif
#else
#define CHAMBERTEMPTABLE_LEN 0
#endif
// The SCAN_THERMISTOR_TABLE macro needs alteration?
static_assert(HEATER_0_TEMPTABLE_LEN < 128 && HEATER_1_TEMPTABLE_LEN < 128 && HEATER_2_TEMPTABLE_LEN < 128 && HEATER_3_TEMPTABLE_LEN < 128 && HEATER_4_TEMPTABLE_LEN < 128 && BEDTEMPTABLE_LEN < 128 && CHAMBERTEMPTABLE_LEN < 128,
"Temperature conversion tables over 127 entries need special consideration."
);
// Set the high and low raw values for the heaters
// For thermistors the highest temperature results in the lowest ADC value
// For thermocouples the highest temperature results in the highest ADC value