bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Fix up configuration comments

Browse Source
This commit is contained in:
Scott Lahteine
2017-04-08 02:49:40 -05:00
parent 995ed90248
commit 824f3c1c0d
23 changed files with 115 additions and 115 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/example_configurations/Felix/DUAL/Configuration.h
View File

@ -579,7 +579,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -606,16 +606,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**