Consolidate MKS Robin / SKR Mini E3 pins (#18354)
This commit is contained in:
thisiskeithb
GitHub
parent
bc9e5e2abc
commit
8225d66b55
@ -187,7 +187,7 @@
|
|||||||
|
|
||||||
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||||
|
|
||||||
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
|
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue."
|
||||||
|
|
||||||
#define LCD_PINS_RS PB9
|
#define LCD_PINS_RS PB9
|
||||||
#define LCD_PINS_ENABLE PB6
|
#define LCD_PINS_ENABLE PB6
|
||||||
|
|||||||
@ -21,7 +21,7 @@
|
|||||||
*/
|
*/
|
||||||
#pragma once
|
#pragma once
|
||||||
|
|
||||||
#include "pins_BTT_SKR_MINI_E3.h"
|
#include "pins_BTT_SKR_MINI_E3_common.h"
|
||||||
|
|
||||||
#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.0"
|
#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.0"
|
||||||
|
|
||||||
|
|||||||
@ -21,7 +21,7 @@
|
|||||||
*/
|
*/
|
||||||
#pragma once
|
#pragma once
|
||||||
|
|
||||||
#include "pins_BTT_SKR_MINI_E3.h"
|
#include "pins_BTT_SKR_MINI_E3_common.h"
|
||||||
|
|
||||||
#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.2"
|
#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.2"
|
||||||
|
|
||||||
|
|||||||
@ -30,7 +30,7 @@
|
|||||||
#undef NO_EEPROM_SELECTED
|
#undef NO_EEPROM_SELECTED
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#include "pins_BTT_SKR_MINI_E3.h"
|
#include "pins_BTT_SKR_MINI_E3_common.h"
|
||||||
|
|
||||||
#define BOARD_INFO_NAME "BTT SKR Mini E3 V2.0"
|
#define BOARD_INFO_NAME "BTT SKR Mini E3 V2.0"
|
||||||
|
|
||||||
|
|||||||
@ -145,7 +145,7 @@
|
|||||||
|
|
||||||
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||||
|
|
||||||
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
|
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue."
|
||||||
|
|
||||||
#define LCD_PINS_RS PB9
|
#define LCD_PINS_RS PB9
|
||||||
#define LCD_PINS_ENABLE EXP1_9
|
#define LCD_PINS_ENABLE EXP1_9
|
||||||
@ -177,7 +177,7 @@
|
|||||||
|
|
||||||
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
||||||
|
|
||||||
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
|
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue."
|
||||||
|
|
||||||
/** FYSETC TFT TFT81050 display pinout
|
/** FYSETC TFT TFT81050 display pinout
|
||||||
*
|
*
|
||||||
@ -22,172 +22,15 @@
|
|||||||
#pragma once
|
#pragma once
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* MKS Robin E3D (STM32F103RCT6) board pin assignments
|
* MKS Robin E3 (STM32F103RCT6) board pin assignments
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef __STM32F1__
|
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
#error "MKS Robin E3 supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
||||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
|
||||||
#error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef BOARD_INFO_NAME
|
#ifndef BOARD_INFO_NAME
|
||||||
#define BOARD_INFO_NAME "MKS Robin E3"
|
#define BOARD_INFO_NAME "MKS Robin E3"
|
||||||
#endif
|
#endif
|
||||||
#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
|
|
||||||
|
|
||||||
//#define DISABLE_DEBUG
|
#include "pins_MKS_ROBIN_E3_common.h"
|
||||||
#define DISABLE_JTAG
|
|
||||||
#define ENABLE_SPI2
|
|
||||||
|
|
||||||
//
|
|
||||||
// EEPROM
|
|
||||||
//
|
|
||||||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
|
||||||
#define FLASH_EEPROM_EMULATION
|
|
||||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
|
||||||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
|
||||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//
|
|
||||||
// Servos
|
|
||||||
//
|
|
||||||
#define SERVO0_PIN PA3
|
|
||||||
|
|
||||||
//
|
|
||||||
// Limit Switches
|
|
||||||
//
|
|
||||||
#define X_STOP_PIN PA12
|
|
||||||
#define Y_STOP_PIN PA11
|
|
||||||
#define Z_MIN_PIN PC6
|
|
||||||
#define Z_MAX_PIN PB1
|
|
||||||
|
|
||||||
//
|
|
||||||
// Steppers
|
|
||||||
//
|
|
||||||
#define X_STEP_PIN PC0
|
|
||||||
#define X_DIR_PIN PB2
|
|
||||||
#define X_ENABLE_PIN PC13
|
|
||||||
|
|
||||||
#define Y_STEP_PIN PC2
|
|
||||||
#define Y_DIR_PIN PB9
|
|
||||||
#define Y_ENABLE_PIN PB12
|
|
||||||
|
|
||||||
#define Z_STEP_PIN PB7
|
|
||||||
#define Z_DIR_PIN PB6
|
|
||||||
#define Z_ENABLE_PIN PB8
|
|
||||||
|
|
||||||
#define E0_STEP_PIN PB4
|
|
||||||
#define E0_DIR_PIN PB3
|
|
||||||
#define E0_ENABLE_PIN PB5
|
|
||||||
|
|
||||||
#if HAS_TMC220x
|
|
||||||
/**
|
|
||||||
* TMC2208/TMC2209 stepper drivers
|
|
||||||
*
|
|
||||||
* Hardware serial communication ports.
|
|
||||||
* If undefined software serial is used according to the pins below
|
|
||||||
*/
|
|
||||||
//#define X_HARDWARE_SERIAL Serial1
|
|
||||||
//#define Y_HARDWARE_SERIAL Serial1
|
|
||||||
//#define Z_HARDWARE_SERIAL Serial1
|
|
||||||
//#define E0_HARDWARE_SERIAL Serial1
|
|
||||||
|
|
||||||
//
|
|
||||||
// Software serial
|
|
||||||
//
|
|
||||||
#define X_SERIAL_TX_PIN PC7
|
|
||||||
#define X_SERIAL_RX_PIN PC7
|
|
||||||
|
|
||||||
#define Y_SERIAL_TX_PIN PD2
|
|
||||||
#define Y_SERIAL_RX_PIN PD2
|
|
||||||
|
|
||||||
#define Z_SERIAL_TX_PIN PC12
|
|
||||||
#define Z_SERIAL_RX_PIN PC12
|
|
||||||
|
|
||||||
#define E0_SERIAL_TX_PIN PC11
|
|
||||||
#define E0_SERIAL_RX_PIN PC11
|
|
||||||
|
|
||||||
// Reduce baud rate to improve software serial reliability
|
|
||||||
#define TMC_BAUD_RATE 19200
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//
|
|
||||||
// Heaters 0,1 / Fans / Bed
|
|
||||||
//
|
|
||||||
#define HEATER_0_PIN PC9
|
|
||||||
#define FAN_PIN PA8
|
|
||||||
#define HEATER_BED_PIN PC8
|
|
||||||
|
|
||||||
//
|
|
||||||
// Temperature Sensors
|
|
||||||
//
|
|
||||||
#define TEMP_BED_PIN PA1 // TB
|
|
||||||
#define TEMP_0_PIN PA0 // TH1
|
|
||||||
|
|
||||||
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
|
||||||
|
|
||||||
/**
|
|
||||||
* _____ _____ _____
|
|
||||||
* (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND
|
|
||||||
* (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS)
|
|
||||||
* (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2)
|
|
||||||
* (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1)
|
|
||||||
* GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER)
|
|
||||||
* ----- ----- -----
|
|
||||||
* EXP1 EXP2 EXP3
|
|
||||||
*/
|
|
||||||
#if HAS_SPI_LCD
|
|
||||||
|
|
||||||
#define BEEPER_PIN PC1
|
|
||||||
#define BTN_ENC PC3
|
|
||||||
#define LCD_PINS_ENABLE PA4
|
|
||||||
#define LCD_PINS_RS PA5
|
|
||||||
#define BTN_EN1 PB11
|
|
||||||
#define BTN_EN2 PB0
|
|
||||||
|
|
||||||
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|
||||||
#if ENABLED(MKS_MINI_12864)
|
|
||||||
|
|
||||||
#define LCD_BACKLIGHT_PIN -1
|
|
||||||
#define LCD_RESET_PIN -1
|
|
||||||
#define DOGLCD_A0 PC4
|
|
||||||
#define DOGLCD_CS PA7
|
|
||||||
#define DOGLCD_SCK PB13
|
|
||||||
#define DOGLCD_MOSI PB15
|
|
||||||
|
|
||||||
#undef SHOW_BOOTSCREEN
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
#define LCD_PINS_D4 PA6
|
|
||||||
#if ENABLED(ULTIPANEL)
|
|
||||||
#define LCD_PINS_D5 PA7
|
|
||||||
#define LCD_PINS_D6 PC4
|
|
||||||
#define LCD_PINS_D7 PC5
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif // !MKS_MINI_12864
|
|
||||||
|
|
||||||
#endif // HAS_SPI_LCD
|
|
||||||
|
|
||||||
//
|
|
||||||
// SD Card
|
|
||||||
//
|
|
||||||
#define ENABLE_SPI2
|
|
||||||
#define SD_DETECT_PIN PC10
|
|
||||||
#define SCK_PIN PB13
|
|
||||||
#define MISO_PIN PB14
|
|
||||||
#define MOSI_PIN PB15
|
|
||||||
#define SS_PIN PA15
|
|
||||||
|
|
||||||
#ifndef ST7920_DELAY_1
|
|
||||||
#define ST7920_DELAY_1 DELAY_NS(125)
|
|
||||||
#endif
|
|
||||||
#ifndef ST7920_DELAY_2
|
|
||||||
#define ST7920_DELAY_2 DELAY_NS(125)
|
|
||||||
#endif
|
|
||||||
#ifndef ST7920_DELAY_3
|
|
||||||
#define ST7920_DELAY_3 DELAY_NS(125)
|
|
||||||
#endif
|
|
||||||
|
|||||||
@ -25,71 +25,26 @@
|
|||||||
* MKS Robin E3D (STM32F103RCT6) board pin assignments
|
* MKS Robin E3D (STM32F103RCT6) board pin assignments
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef __STM32F1__
|
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
|
||||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
|
||||||
#error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
#error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef BOARD_INFO_NAME
|
#ifndef BOARD_INFO_NAME
|
||||||
#define BOARD_INFO_NAME "MKS Robin E3D"
|
#define BOARD_INFO_NAME "MKS Robin E3D"
|
||||||
#endif
|
#endif
|
||||||
#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
|
|
||||||
|
|
||||||
//#define DISABLE_DEBUG
|
|
||||||
#define DISABLE_JTAG
|
|
||||||
#define ENABLE_SPI2
|
|
||||||
|
|
||||||
//
|
|
||||||
// EEPROM
|
|
||||||
//
|
|
||||||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
|
||||||
#define FLASH_EEPROM_EMULATION
|
|
||||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
|
||||||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
|
||||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//
|
|
||||||
// Servos
|
|
||||||
//
|
|
||||||
#define SERVO0_PIN PA3
|
|
||||||
|
|
||||||
//
|
|
||||||
// Limit Switches
|
|
||||||
//
|
|
||||||
#define X_STOP_PIN PA12
|
|
||||||
#define Y_STOP_PIN PA11
|
|
||||||
#define Z_MIN_PIN PC6
|
|
||||||
#define Z_MAX_PIN PB1
|
|
||||||
|
|
||||||
//
|
//
|
||||||
// Steppers
|
// Steppers
|
||||||
//
|
//
|
||||||
#define X_STEP_PIN PC0
|
|
||||||
#define X_DIR_PIN PB2
|
|
||||||
#define X_ENABLE_PIN PC13
|
|
||||||
#ifndef X_CS_PIN
|
#ifndef X_CS_PIN
|
||||||
#define X_CS_PIN PC7
|
#define X_CS_PIN PC7
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define Y_STEP_PIN PC2
|
|
||||||
#define Y_DIR_PIN PB9
|
|
||||||
#define Y_ENABLE_PIN PB12
|
|
||||||
#ifndef Y_CS_PIN
|
#ifndef Y_CS_PIN
|
||||||
#define Y_CS_PIN PD2
|
#define Y_CS_PIN PD2
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define Z_STEP_PIN PB7
|
|
||||||
#define Z_DIR_PIN PB6
|
|
||||||
#define Z_ENABLE_PIN PB8
|
|
||||||
#ifndef Z_CS_PIN
|
#ifndef Z_CS_PIN
|
||||||
#define Z_CS_PIN PC12
|
#define Z_CS_PIN PC12
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define E0_STEP_PIN PB4
|
|
||||||
#define E0_DIR_PIN PB3
|
|
||||||
#define E0_ENABLE_PIN PB5
|
|
||||||
#ifndef E0_CS_PIN
|
#ifndef E0_CS_PIN
|
||||||
#define E0_CS_PIN PC11
|
#define E0_CS_PIN PC11
|
||||||
#endif
|
#endif
|
||||||
@ -109,112 +64,4 @@
|
|||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if HAS_TMC220x
|
#include "pins_MKS_ROBIN_E3_common.h"
|
||||||
/**
|
|
||||||
* TMC2208/TMC2209 stepper drivers
|
|
||||||
*
|
|
||||||
* Hardware serial communication ports.
|
|
||||||
* If undefined software serial is used according to the pins below
|
|
||||||
*/
|
|
||||||
//#define X_HARDWARE_SERIAL Serial1
|
|
||||||
//#define Y_HARDWARE_SERIAL Serial1
|
|
||||||
//#define Z_HARDWARE_SERIAL Serial1
|
|
||||||
//#define E0_HARDWARE_SERIAL Serial1
|
|
||||||
|
|
||||||
//
|
|
||||||
// Software serial
|
|
||||||
//
|
|
||||||
#define X_SERIAL_TX_PIN PC7
|
|
||||||
#define X_SERIAL_RX_PIN PC7
|
|
||||||
|
|
||||||
#define Y_SERIAL_TX_PIN PD2
|
|
||||||
#define Y_SERIAL_RX_PIN PD2
|
|
||||||
|
|
||||||
#define Z_SERIAL_TX_PIN PC12
|
|
||||||
#define Z_SERIAL_RX_PIN PC12
|
|
||||||
|
|
||||||
#define E0_SERIAL_TX_PIN PC11
|
|
||||||
#define E0_SERIAL_RX_PIN PC11
|
|
||||||
|
|
||||||
// Reduce baud rate to improve software serial reliability
|
|
||||||
#define TMC_BAUD_RATE 19200
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//
|
|
||||||
// Heaters 0,1 / Fans / Bed
|
|
||||||
//
|
|
||||||
#define HEATER_0_PIN PC9
|
|
||||||
#define FAN_PIN PA8
|
|
||||||
#define HEATER_BED_PIN PC8
|
|
||||||
|
|
||||||
//
|
|
||||||
// Temperature Sensors
|
|
||||||
//
|
|
||||||
#define TEMP_BED_PIN PA1 //TB
|
|
||||||
#define TEMP_0_PIN PA0 //TH1
|
|
||||||
|
|
||||||
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
|
||||||
|
|
||||||
/**
|
|
||||||
* _____ _____ _____
|
|
||||||
* (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND
|
|
||||||
* (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS)
|
|
||||||
* (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2)
|
|
||||||
* (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1)
|
|
||||||
* GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER)
|
|
||||||
* ----- ----- -----
|
|
||||||
* EXP1 EXP2 EXP3
|
|
||||||
*/
|
|
||||||
#if HAS_SPI_LCD
|
|
||||||
|
|
||||||
#define BEEPER_PIN PC1
|
|
||||||
#define BTN_ENC PC3
|
|
||||||
#define LCD_PINS_ENABLE PA4
|
|
||||||
#define LCD_PINS_RS PA5
|
|
||||||
#define BTN_EN1 PB11
|
|
||||||
#define BTN_EN2 PB0
|
|
||||||
|
|
||||||
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|
||||||
#if ENABLED(MKS_MINI_12864)
|
|
||||||
|
|
||||||
#define LCD_BACKLIGHT_PIN -1
|
|
||||||
#define LCD_RESET_PIN -1
|
|
||||||
#define DOGLCD_A0 PC4
|
|
||||||
#define DOGLCD_CS PA7
|
|
||||||
#define DOGLCD_SCK PB13
|
|
||||||
#define DOGLCD_MOSI PB15
|
|
||||||
|
|
||||||
#undef SHOW_BOOTSCREEN
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
#define LCD_PINS_D4 PA6
|
|
||||||
#if ENABLED(ULTIPANEL)
|
|
||||||
#define LCD_PINS_D5 PA7
|
|
||||||
#define LCD_PINS_D6 PC4
|
|
||||||
#define LCD_PINS_D7 PC5
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif // !MKS_MINI_12864
|
|
||||||
|
|
||||||
#endif // HAS_SPI_LCD
|
|
||||||
|
|
||||||
//
|
|
||||||
// SD Card
|
|
||||||
//
|
|
||||||
#define ENABLE_SPI2
|
|
||||||
#define SD_DETECT_PIN PC10
|
|
||||||
#define SCK_PIN PB13
|
|
||||||
#define MISO_PIN PB14
|
|
||||||
#define MOSI_PIN PB15
|
|
||||||
#define SS_PIN PA15
|
|
||||||
|
|
||||||
#ifndef ST7920_DELAY_1
|
|
||||||
#define ST7920_DELAY_1 DELAY_NS(125)
|
|
||||||
#endif
|
|
||||||
#ifndef ST7920_DELAY_2
|
|
||||||
#define ST7920_DELAY_2 DELAY_NS(125)
|
|
||||||
#endif
|
|
||||||
#ifndef ST7920_DELAY_3
|
|
||||||
#define ST7920_DELAY_3 DELAY_NS(125)
|
|
||||||
#endif
|
|
||||||
|
|||||||
188
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
Normal file
188
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
Normal file
@ -0,0 +1,188 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/**
|
||||||
|
* MKS Robin E3 & E3D (STM32F103RCT6) common board pin assignments
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __STM32F1__
|
||||||
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
|
||||||
|
|
||||||
|
//#define DISABLE_DEBUG
|
||||||
|
#define DISABLE_JTAG
|
||||||
|
#define ENABLE_SPI2
|
||||||
|
|
||||||
|
//
|
||||||
|
// EEPROM
|
||||||
|
//
|
||||||
|
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
||||||
|
#define FLASH_EEPROM_EMULATION
|
||||||
|
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||||
|
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
||||||
|
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Servos
|
||||||
|
//
|
||||||
|
#define SERVO0_PIN PA3
|
||||||
|
|
||||||
|
//
|
||||||
|
// Limit Switches
|
||||||
|
//
|
||||||
|
#define X_STOP_PIN PA12
|
||||||
|
#define Y_STOP_PIN PA11
|
||||||
|
#define Z_MIN_PIN PC6
|
||||||
|
#define Z_MAX_PIN PB1
|
||||||
|
|
||||||
|
//
|
||||||
|
// Steppers
|
||||||
|
//
|
||||||
|
#define X_STEP_PIN PC0
|
||||||
|
#define X_DIR_PIN PB2
|
||||||
|
#define X_ENABLE_PIN PC13
|
||||||
|
|
||||||
|
#define Y_STEP_PIN PC2
|
||||||
|
#define Y_DIR_PIN PB9
|
||||||
|
#define Y_ENABLE_PIN PB12
|
||||||
|
|
||||||
|
#define Z_STEP_PIN PB7
|
||||||
|
#define Z_DIR_PIN PB6
|
||||||
|
#define Z_ENABLE_PIN PB8
|
||||||
|
|
||||||
|
#define E0_STEP_PIN PB4
|
||||||
|
#define E0_DIR_PIN PB3
|
||||||
|
#define E0_ENABLE_PIN PB5
|
||||||
|
|
||||||
|
#if HAS_TMC220x
|
||||||
|
/**
|
||||||
|
* TMC2208/TMC2209 stepper drivers
|
||||||
|
*
|
||||||
|
* Hardware serial communication ports.
|
||||||
|
* If undefined software serial is used according to the pins below
|
||||||
|
*/
|
||||||
|
//#define X_HARDWARE_SERIAL Serial1
|
||||||
|
//#define Y_HARDWARE_SERIAL Serial1
|
||||||
|
//#define Z_HARDWARE_SERIAL Serial1
|
||||||
|
//#define E0_HARDWARE_SERIAL Serial1
|
||||||
|
|
||||||
|
//
|
||||||
|
// Software serial
|
||||||
|
//
|
||||||
|
#define X_SERIAL_TX_PIN PC7
|
||||||
|
#define X_SERIAL_RX_PIN PC7
|
||||||
|
|
||||||
|
#define Y_SERIAL_TX_PIN PD2
|
||||||
|
#define Y_SERIAL_RX_PIN PD2
|
||||||
|
|
||||||
|
#define Z_SERIAL_TX_PIN PC12
|
||||||
|
#define Z_SERIAL_RX_PIN PC12
|
||||||
|
|
||||||
|
#define E0_SERIAL_TX_PIN PC11
|
||||||
|
#define E0_SERIAL_RX_PIN PC11
|
||||||
|
|
||||||
|
// Reduce baud rate to improve software serial reliability
|
||||||
|
#define TMC_BAUD_RATE 19200
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Heaters 0,1 / Fans / Bed
|
||||||
|
//
|
||||||
|
#define HEATER_0_PIN PC9
|
||||||
|
#define FAN_PIN PA8
|
||||||
|
#define HEATER_BED_PIN PC8
|
||||||
|
|
||||||
|
//
|
||||||
|
// Temperature Sensors
|
||||||
|
//
|
||||||
|
#define TEMP_BED_PIN PA1 // TB
|
||||||
|
#define TEMP_0_PIN PA0 // TH1
|
||||||
|
|
||||||
|
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
||||||
|
|
||||||
|
/**
|
||||||
|
* _____ _____ _____
|
||||||
|
* (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND
|
||||||
|
* (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS)
|
||||||
|
* (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2)
|
||||||
|
* (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1)
|
||||||
|
* GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER)
|
||||||
|
* ----- ----- -----
|
||||||
|
* EXP1 EXP2 EXP3
|
||||||
|
*/
|
||||||
|
#if HAS_SPI_LCD
|
||||||
|
|
||||||
|
#define BEEPER_PIN PC1
|
||||||
|
#define BTN_ENC PC3
|
||||||
|
#define LCD_PINS_ENABLE PA4
|
||||||
|
#define LCD_PINS_RS PA5
|
||||||
|
#define BTN_EN1 PB11
|
||||||
|
#define BTN_EN2 PB0
|
||||||
|
|
||||||
|
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
||||||
|
#if ENABLED(MKS_MINI_12864)
|
||||||
|
|
||||||
|
#define LCD_BACKLIGHT_PIN -1
|
||||||
|
#define LCD_RESET_PIN -1
|
||||||
|
#define DOGLCD_A0 PC4
|
||||||
|
#define DOGLCD_CS PA7
|
||||||
|
#define DOGLCD_SCK PB13
|
||||||
|
#define DOGLCD_MOSI PB15
|
||||||
|
|
||||||
|
#undef SHOW_BOOTSCREEN
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
#define LCD_PINS_D4 PA6
|
||||||
|
#if ENABLED(ULTIPANEL)
|
||||||
|
#define LCD_PINS_D5 PA7
|
||||||
|
#define LCD_PINS_D6 PC4
|
||||||
|
#define LCD_PINS_D7 PC5
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // !MKS_MINI_12864
|
||||||
|
|
||||||
|
#endif // HAS_SPI_LCD
|
||||||
|
|
||||||
|
//
|
||||||
|
// SD Card
|
||||||
|
//
|
||||||
|
#define ENABLE_SPI2
|
||||||
|
#define SD_DETECT_PIN PC10
|
||||||
|
#define SCK_PIN PB13
|
||||||
|
#define MISO_PIN PB14
|
||||||
|
#define MOSI_PIN PB15
|
||||||
|
#define SS_PIN PA15
|
||||||
|
|
||||||
|
#ifndef ST7920_DELAY_1
|
||||||
|
#define ST7920_DELAY_1 DELAY_NS(125)
|
||||||
|
#endif
|
||||||
|
#ifndef ST7920_DELAY_2
|
||||||
|
#define ST7920_DELAY_2 DELAY_NS(125)
|
||||||
|
#endif
|
||||||
|
#ifndef ST7920_DELAY_3
|
||||||
|
#define ST7920_DELAY_3 DELAY_NS(125)
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue
Block a user