Clean up some trailing white-space

Marlin/src/config/default/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -1714,7 +1714,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -1853,7 +1853,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -1702,7 +1702,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -1689,7 +1689,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -1685,7 +1685,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -1695,7 +1695,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -1685,7 +1685,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -1693,7 +1693,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -1704,7 +1704,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Felix/Configuration.h

@@ -1676,7 +1676,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -1676,7 +1676,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -1691,7 +1691,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -1709,7 +1709,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -1698,7 +1698,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -1722,7 +1722,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -1698,7 +1698,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -1698,7 +1698,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -1669,7 +1669,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/SCARA/Configuration.h

@@ -1706,7 +1706,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -1697,7 +1697,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -1725,7 +1725,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -1750,7 +1750,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -1695,7 +1695,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -1729,7 +1729,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -1694,7 +1694,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1828,7 +1828,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1821,7 +1821,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -1816,7 +1816,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -1819,7 +1819,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -1819,7 +1819,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -1828,7 +1828,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -1708,7 +1708,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .5    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/makibox/Configuration.h

@@ -1697,7 +1697,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -1689,7 +1689,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/src/config/examples/wt150/Configuration.h

@@ -1699,7 +1699,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.