Bring configs up to date

Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h

@@ -161,7 +161,10 @@
 //#define SWITCHING_EXTRUDER
 #if ENABLED(SWITCHING_EXTRUDER)
   #define SWITCHING_EXTRUDER_SERVO_NR 0
-  #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1
+  #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
+  #if EXTRUDERS > 3
+    #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
+  #endif
 #endif
 
 // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@@ -553,7 +556,6 @@
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                  4.0
 
-
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -698,7 +700,8 @@
 #define Z_CLEARANCE_DEPLOY_PROBE    3 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  3 // Z Clearance between probe points
 
-// For M851 give a range for adjusting the Z probe offset#define Z_PROBE_OFFSET_RANGE_MIN -20
+// For M851 give a range for adjusting the Z probe offset
+#define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20
 
 // Enable the M48 repeatability test to test probe accuracy
@@ -1462,11 +1465,6 @@
 //
 //#define U8GLIB_SSD1306
 
-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
@@ -1484,6 +1482,11 @@
 //
 //#define SAV_3DLCD
 
+//
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================