bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Add HOST_PROMPT_SUPPORT (#13039)

Browse Source
This commit is contained in:
InsanityAutomation
2019-02-12 16:55:47 -05:00
committed by Scott Lahteine
parent 0feeef2604
commit 7f1b69b0c8
189 changed files with 2076 additions and 3479 deletions
Download Patch File Download Diff File Expand all files Collapse all files

49
Marlin/Configuration_adv.h
View File

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================