[2.0.x] Teensy 3.1 and 3.2 support (#11460)

2018-08-28 05:49:49 +03:00
parent 409a0632af
commit 7ecb8b4af5
21 changed files with 1173 additions and 7 deletions
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@ -381,6 +381,8 @@
 // STM32 ARM Cortex-M4F
 //

+#elif MB(TEENSY31_32)
+  #include "pins_TEENSY31_32.h"       // TEENSY31_32                                env:teensy31
 #elif MB(TEENSY35_36)
  #include "pins_TEENSY35_36.h"       // TEENSY35_36                                env:teensy35
 #elif MB(BEAST)
--- a/Marlin/src/pins/pins_TEENSY31_32.h
+++ b/Marlin/src/pins/pins_TEENSY31_32.h
@ -0,0 +1,111 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/****************************************************************************************
+* Teensy 3.1 (MK20DX256) and Teensy 3.2 (MK20DX256) Breadboard pin assignments
+* Requires the Teensyduino software with Teensy 3.1 or Teensy 3.2 selected in Arduino IDE!
+* http://www.pjrc.com/teensy/teensyduino.html
+****************************************************************************************/
+
+#if !IS_32BIT_TEENSY
+  #error "Oops!  Make sure you have 'Teensy 3.1' or 'Teensy 3.2' selected from the 'Tools -> Boards' menu."
+#endif
+
+#if IS_TEENSY32
+  #define BOARD_NAME "Teensy3.2"
+#endif
+
+#define AT90USB 1286   // Disable MarlinSerial etc.
+#define USBCON //1286  // Disable MarlinSerial etc.
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         3
+#define Y_STOP_PIN         4
+#define Z_STOP_PIN         5
+
+//
+// Steppers
+//
+#define X_STEP_PIN         5
+#define X_DIR_PIN          6
+#define X_ENABLE_PIN       2
+
+#define Y_STEP_PIN         7
+#define Y_DIR_PIN          8
+#define Y_ENABLE_PIN       2
+
+#define Z_STEP_PIN         9
+#define Z_DIR_PIN          10
+#define Z_ENABLE_PIN       2
+
+#define E0_STEP_PIN        11
+#define E0_DIR_PIN         12
+#define E0_ENABLE_PIN      2
+
+// #define E1_STEP_PIN        33
+// #define E1_DIR_PIN         34
+// #define E1_ENABLE_PIN      35
+
+#define HEATER_0_PIN       20
+// #define HEATER_1_PIN       36
+#define HEATER_BED_PIN     21
+#ifndef FAN_PIN
+  #define FAN_PIN          22
+#endif
+
+#define TEMP_0_PIN         14   // Extruder / Analog pin numbering: 2 => A2
+// #define TEMP_1_PIN          0
+#define TEMP_BED_PIN       15   // Bed / Analog pin numbering
+
+// #define SDSS               16   // 8
+#define LED_PIN            13
+#define PS_ON_PIN          -1
+#define ALARM_PIN          -1
+
+// #define FILWIDTH_PIN        6
+// #define SOL1_PIN           28
+
+#if 0
+// Pretty sure this is obsolete!
+// Please use Marlin 1.1.x pins files as reference for new pins files.
+#ifndef SDSUPPORT
+  // these are defined in the SD library if building with SD support
+  #define SCK_PIN          13
+  #define MISO_PIN         12
+  #define MOSI_PIN         11
+#endif
+#endif
+/*
+#ifdef ULTRA_LCD
+  #define LCD_PINS_RS      40
+  #define LCD_PINS_ENABLE  41
+  #define LCD_PINS_D4      42
+  #define LCD_PINS_D5      43
+  #define LCD_PINS_D6      44
+  #define LCD_PINS_D7      45
+  #define BTN_EN1          46
+  #define BTN_EN2          47
+  #define BTN_ENC          48
+#endif
+*/