bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ Artillery Ruby (STM32F401RCT6) (#23029)

Browse Source
This commit is contained in:
Keith Bennett
2021-11-01 20:23:24 -07:00
committed by Scott Lahteine
parent 0b84194127
commit 7e9e2a7435
14 changed files with 1552 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/STM32/HAL.cpp
View File

@ -154,7 +154,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) { HAL_adc_result = analogRe
uint16_t HAL_adc_get_result() { return HAL_adc_result; }
// Reset the system to initiate a firmware flash
void flashFirmware(const int16_t) { HAL_reboot(); }
WEAK void flashFirmware(const int16_t) { HAL_reboot(); }
// Maple Compatibility
volatile uint32_t systick_uptime_millis = 0;

1
Marlin/src/core/boards.h
View File

@ -406,6 +406,7 @@
#define BOARD_INDEX_REV03 4234 // Index PnP Controller REV03 (STM32F407VET6/VGT6)
#define BOARD_MKS_ROBIN_NANO_V1_3_F4 4235 // MKS Robin Nano V1.3 and MKS Robin Nano-S V1.3 (STM32F407VET6)
#define BOARD_MKS_EAGLE 4236 // MKS Eagle (STM32F407VET6)
#define BOARD_ARTILLERY_RUBY 4237 // Artillery Ruby (STM32F401RCT6)
//
// ARM Cortex M7

2
Marlin/src/pins/pins.h
View File

@ -667,6 +667,8 @@
#include "stm32f4/pins_MKS_ROBIN_NANO_V1_3_F4.h" // STM32F4 env:mks_robin_nano_v1_3_f4
#elif MB(MKS_EAGLE)
#include "stm32f4/pins_MKS_EAGLE.h" // STM32F4 env:mks_eagle
#elif MB(ARTILLERY_RUBY)
#include "stm32f4/pins_ARTILLERY_RUBY.h" // STM32F4 env:Artillery_Ruby
//
// ARM Cortex M7

182
Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h Normal file
View File

@ -0,0 +1,182 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#if HOTENDS > 1 || E_STEPPERS > 1
#error "Artillery Ruby supports up to 1 hotends / E-steppers."
#endif
#define BOARD_INFO_NAME "Artillery Ruby"
#define FLASH_EEPROM_EMULATION
//#define I2C_EEPROM
//#define E2END 0xFFF // 4KB
#define HAL_TIMER_RATE F_CPU
//
// Limit Switches
//
#if (X_HOME_DIR == 1)
#define X_MIN_PIN -1
#define X_MAX_PIN PA2
#else
#define X_MIN_PIN PA2
#define X_MAX_PIN -1
#endif
#if (Y_HOME_DIR == 1)
#define Y_MIN_PIN -1
#define Y_MAX_PIN PA1
#else
#define Y_MIN_PIN PA1
#define Y_MAX_PIN -1
#endif
#if (Z_HOME_DIR == 1)
#define Z_MIN_PIN PC2
#define Z_MAX_PIN PA0
#else
#define Z_MIN_PIN PA0
#define Z_MAX_PIN PC2
#endif
//
// Steppers
//
#define X_STEP_PIN PB14
#define X_DIR_PIN PB13
#define X_ENABLE_PIN PB15
#define Y_STEP_PIN PB10
#define Y_DIR_PIN PB2
#define Y_ENABLE_PIN PB12
#define Z_STEP_PIN PB0
#define Z_DIR_PIN PC5
#define Z_ENABLE_PIN PB1
#define E0_STEP_PIN PA7
#define E0_DIR_PIN PA6
#define E0_ENABLE_PIN PC4
#define E1_STEP_PIN PA4
#define E1_DIR_PIN PA3
#define E1_ENABLE_PIN PA5
//
// Temperature Sensors
//
#define TEMP_0_PIN PC0
#define TEMP_BED_PIN PC1
//
// Heaters / Fans
//
#ifndef HEATER_0_PIN
#define HEATER_0_PIN PC9 // Heater0
#endif
#ifndef HEATER_BED_PIN
#define HEATER_BED_PIN PA8 // Hotbed
#endif
#ifndef FAN_PIN
#define FAN_PIN PC8 // Fan0
#endif
#ifndef FAN1_PIN
#define FAN1_PIN PC7 // Fan1
#endif
#ifndef FAN2_PIN
#define FAN2_PIN PC6 // Fan2
#endif
//
// Servos
//
#define SERVO0_PIN PC3
//
// SPI
//
#define SCK_PIN PC10
#define MISO_PIN PC11
#define MOSI_PIN PC12
//
// LCD / Controller
//
#if HAS_WIRED_LCD
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
#define LCD_PINS_DC PB8 // Set as output on init
#define LCD_PINS_RS PB9 // Pull low for 1s to init
// DOGM SPI LCD Support
#define DOGLCD_CS PC15
#define DOGLCD_MOSI PB6
#define DOGLCD_SCK PB5
#define DOGLCD_A0 LCD_PINS_DC
#elif ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS PB6
#define DOGLCD_A0 PC15
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN PB5 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PB9
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN PB8
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN PB7
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN PB9
#endif
#define DEFAULT_LCD_CONTRAST 255
#else
#define LCD_PINS_RS PC15
#define LCD_PINS_ENABLE PB6
#define LCD_PINS_D4 PB5
#define LCD_PINS_D5 PB9
#define LCD_PINS_D6 PB8
#endif
#define LCD_PINS_D7 PB7
//
// Beeper, SD Card, Encoder
//
#define BEEPER_PIN PC13
#if ENABLED(SDSUPPORT)
#define SDSS PA15
#define SD_DETECT_PIN PD2
#endif
#define BTN_EN1 PB4
#define BTN_EN2 PB3
#define BTN_ENC PC14
#endif