diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 155605f609..ec5bc0bfdb 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 155605f609..ec5bc0bfdb 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 6b41bba573..e86dfcec78 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -719,7 +719,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 79.9738621, 80.2429911, 399.7264854 , 99.4696994 } @@ -727,7 +727,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 225, 225, 3, 25 } @@ -740,7 +740,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1590, 1590, 100, 10000 } diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 90f102d0a1..1eef22b714 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 400, 94 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -729,7 +729,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 50, 2000 } diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index dd1afb9240..63304e789e 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 58f26adfaa..657b0f1281 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -734,14 +734,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 } @@ -754,7 +754,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 2329a1b7a5..81b6c240bc 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -777,14 +777,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 } @@ -797,7 +797,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 } diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 75b760cca1..613e661f0b 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -777,14 +777,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 } @@ -797,7 +797,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 } diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 7db163b067..2dababea86 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 160.6 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 8415915e80..d535be7bc1 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -725,14 +725,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 200, 355 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 40, 45} @@ -745,7 +745,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index fb0c02b4ac..10489a3fd1 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 7f1b05d817..a940360a4c 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 8291c6f208..15b2a26a95 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -734,7 +734,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } @@ -746,7 +746,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -765,7 +765,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 036e429308..01c43904a9 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -727,14 +727,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 8, 50 } @@ -747,7 +747,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 6b87ea5442..b89b991a5b 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -725,14 +725,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 50, 25 } @@ -745,7 +745,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index 9d069f33a9..ea0af44725 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -726,14 +726,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 25 } @@ -746,7 +746,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index e182ed83f2..251a6a9aad 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -724,14 +724,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96.2 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 6, 25 } @@ -744,7 +744,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1500, 1500, 50, 8000 } diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 9cbb3a1075..9d1a6ad2be 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -715,14 +715,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 156.84 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 120 } @@ -735,7 +735,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 5000 } diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index d558eae524..1370b2ff21 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 93da7abf51..4c1b775e30 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 400} /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 50 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 2500 } diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 5546a516c9..10601a7fc3 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 93.6 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 5000 } diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 5e22c32c5a..480f442a55 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -702,14 +702,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 } @@ -722,7 +722,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 } diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index e528e82d97..44625e9780 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -715,14 +715,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 218.77 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 120 } @@ -735,7 +735,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index ffb30cb4fb..36984ee7d3 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -702,14 +702,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 600.0*8/3, 102.073 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 } @@ -722,7 +722,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 } diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index e8c4924825..a6770085c6 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -713,14 +713,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 } @@ -733,7 +733,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 } diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 38e1e6273e..388b6151ab 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -724,14 +724,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } @@ -744,7 +744,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index 4731c7e7c9..89f5c7258f 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 65ae14eef2..063e88af08 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -714,7 +714,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } // Stock Creality //#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } // Creality with Bondtech extruder @@ -722,7 +722,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -735,7 +735,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 300, 300, 100, 5000 } diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index 1b82e86b43..1fcf2eb6bd 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -733,14 +733,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 79.60, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } @@ -753,7 +753,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 65f93c55c6..10e452d499 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -718,14 +718,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index cd9005cabc..52eca529fe 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -718,14 +718,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 73bb713274..00096b9cba 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -724,14 +724,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.60 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -744,7 +744,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index e9899dd97c..d8e58dfc51 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -718,14 +718,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index 8d1cc86cba..8d2c2998e4 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -718,14 +718,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 0f63b169cb..84f1da4df8 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -724,14 +724,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } @@ -744,7 +744,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index 66d0dc13bc..3cf6930e1e 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -718,14 +718,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 271e6d376c..b898264b54 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 196 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 4, 170 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 1000, 20, 10000 } diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h index efae104594..9f2fcfc710 100644 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80.121, 80.121, 399.778, 445 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 40 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 430b7fde5c..9ecde05b27 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -724,14 +724,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 96.337120 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -744,7 +744,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 7c658157f6..e781228757 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 640, 640, 3200, 800 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h index d72e5b09c5..352893b97a 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h index 9ade0468b4..4e6150620a 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h index ccddc2e153..785778ea99 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h @@ -721,14 +721,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -741,7 +741,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h index 00f490fcbc..757e57df62 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 3048dc1732..682559e96e 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -716,14 +716,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 1280, 1280, 6400, 1600 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -736,7 +736,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index be26b9d9e9..ce8dc7d29b 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -696,14 +696,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -716,7 +716,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 159176547e..1fc71c94ed 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -696,14 +696,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -716,7 +716,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 4ca6da6768..6656bdda20 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -704,7 +704,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //really Sailfish... got enough precision on that float for an 8 bit system? //I'm leaving this in for posterior's sake @@ -713,7 +713,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 250, 250, 20, 100 } @@ -726,7 +726,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 4b2ec2f048..028d5c645a 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -719,7 +719,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 52.2 } // 52.4 is correct for printer as shipped #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 104.4 } // 104.4 with 32 micro steps enabled gives better results @@ -727,7 +727,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 } @@ -740,7 +740,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 4, 750 } diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 7b159f5987..269c1d78c8 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -766,7 +766,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #if ENABLED(Y_2208) #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 96 } @@ -777,7 +777,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 } @@ -790,7 +790,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #if ENABLED(X_2208) #if ENABLED(X_SPREADCYCLE) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 2389f6c983..30dff8f209 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -743,14 +743,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 100, 5, 25 } @@ -763,7 +763,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1500, 500, 400, 4000 } diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index f6cefe4904..230846ea4a 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -723,7 +723,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } @@ -731,7 +731,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 } @@ -745,7 +745,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1500, 500, 400, 4000 } diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 8a681622c2..7407f28b55 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -697,14 +697,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -717,7 +717,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 625b1b728e..621a9bdaee 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -697,14 +697,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -717,7 +717,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index faa7431d3a..082cea765b 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -697,14 +697,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -717,7 +717,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 6ecc7f639f..c9e5d7de3b 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -729,14 +729,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } @@ -749,7 +749,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 50, 5000 } diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 50522cea0d..e1825c7e1d 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 93 } // MXL, Z M8=1.25, MK8 /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 4000, 4000, 40, 4000 } diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 4a4eaae321..0479a3d402 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -721,14 +721,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 250, 250, 400, 45 } @@ -741,7 +741,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index f86078badc..1a52705be7 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -729,7 +729,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define PRO_B_WITH_LEADSCREW #if ENABLED(PRO_B_WITH_LEADSCREW) // M8 leadscrew version @@ -741,7 +741,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } @@ -754,7 +754,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 9a3c24ccf7..a25507a8f5 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -729,7 +729,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define PRO_B_WITH_LEADSCREW #if ENABLED(PRO_B_WITH_LEADSCREW) // M8 leadscrew version @@ -741,7 +741,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } @@ -754,7 +754,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 6e90fd0e39..32e28e9544 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 30cf637a8a..f84fa6850d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 54b4214e49..ba91e2f272 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -701,14 +701,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 53.45, 71.19, 160, 169.05 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 1000, 1000, 40, 25 } @@ -721,7 +721,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 7d648499ac..46f63d8e9d 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -718,14 +718,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 92.6 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 5, 25 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index ba6510b4a4..ad7f079533 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -721,14 +721,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 202 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 } @@ -736,7 +736,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1200, 350, 100, 500 } diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 7b00e9753e..424a452e38 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -726,14 +726,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } @@ -746,7 +746,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 500, 100, 5000 } diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 9eff362706..0247a014c7 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -721,14 +721,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 202 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 } @@ -736,7 +736,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1200, 350, 100, 500 } diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 5803b380f1..ca6b8d5680 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 2, 30 } // For 300mm/s printing @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2400, 2400, 10, 200 } diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 62d8a59410..f0231cccde 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -727,7 +727,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // Standard M150 17T MXL on X and Y #define DEFAULT_AXIS_STEPS_PER_UNIT { 3200/34.544, 3200/34.544, 1600, 103.00 } @@ -741,7 +741,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -754,7 +754,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 700, 700, 100, 10000 } diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 043b32d569..4024fa0d4c 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -724,14 +724,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 93, 93, 1097.5, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -744,7 +744,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 594c79ac33..33c523191f 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -714,7 +714,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // choose your micro step per step configuration ( 16 factory settings ) #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) @@ -725,7 +725,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 7eb2d51166..100aaa662d 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -714,7 +714,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // choose your micro step per step configuration ( 16 factory settings ) //#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) @@ -725,7 +725,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } @@ -738,7 +738,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 62b879434d..648b7bd863 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -715,14 +715,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -735,7 +735,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index ebccfc97e5..aade951f7a 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 280 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 7e4eaab494..288a996088 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -715,7 +715,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 80 } @@ -723,7 +723,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 30, 30,30,30 } @@ -737,7 +737,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ //#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 100, 100, 100, 100 } diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 4f6f59a639..76e283d53c 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 157, 157, 800, 195 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index c018cce3e7..5f419a2485 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -753,14 +753,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_Z_FEEDRATE 3.3 // older Huxley has problem with speeds > 3.3 mm/s on Z axis #define DEFAULT_MAX_FEEDRATE { 200, 200, DEFAULT_MAX_Z_FEEDRATE, 25 } @@ -774,7 +774,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 50, 1000 } diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index e9dfd88873..995c71e0dc 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index b663e6e32a..ed41d20a81 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -710,7 +710,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // default steps per unit for RigidBot with standard hardware #define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 } @@ -719,7 +719,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -732,7 +732,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 } diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index 1d79a972ba..244dc7542b 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -723,14 +723,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } @@ -743,7 +743,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 } diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 135fb75d20..d12a68da99 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 77d23d8501..660cf34d87 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -716,14 +716,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105.0 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } @@ -736,7 +736,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1400, 1400, 100, 80000 } diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 5759e87efa..d7d8dda524 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index 3ebb230cc4..59199f085f 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -716,14 +716,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105.0 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } @@ -736,7 +736,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1400, 1400, 100, 80000 } diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 628aa111db..cfa225f212 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -745,14 +745,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 8, 45 } @@ -765,7 +765,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 81b8d3401f..3d68ecbbd7 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80.165, 80.165, 399.2901, 408 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 60, 55 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 10000, 10000, 400, 10000 } diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 4d53d8b865..1643827d79 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80.058, 80.058, 399.2901, 408 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 50, 45 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 104cfa0d62..9b085ca0cc 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 79.765, 79.765, 399.2901, 400 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 250, 250, 30, 55 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 120, 10000 } diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index c38dcf0516..a0490486b2 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 79.765, 79.765, 399.2901, 400 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 250, 250, 30, 55 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 120, 10000 } diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index a9cfc7f625..7ea5e44a92 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 280 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index cfa19bc6bd..b24984b02f 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -765,14 +765,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 6400, 88.16 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 7, 35 } @@ -785,7 +785,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index e9902c8517..226a0caa2b 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 50 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 400, 400, 40, 5000 } diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 95c1e1fcc2..711baa8a79 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1500, 5000 } diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index ff0ad44962..5f6d7e516d 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -735,14 +735,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 94 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -755,7 +755,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 1000 } diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 5ab4e8d928..cc94f94c24 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 150 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 41373c1a3f..50bac4c570 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -725,14 +725,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } @@ -745,7 +745,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 1000, 5000 } diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 42a00c4bde..0127ca3886 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 11f5b0686a..6507a371db 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 85b2110c8d..9a5ae4471c 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -723,14 +723,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 608, 608 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 75, 75 } @@ -743,7 +743,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 , 10000 } diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index f02c806b71..1512fc269d 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -744,13 +744,13 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } @@ -763,7 +763,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index a18f843c24..1f6c7da639 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 0ee10ba035..e4d33b75fb 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index a27c67871f..4f5bcde2da 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -733,14 +733,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 85.48,85.48,533.33,104.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 150, 150, 15, 20 } @@ -753,7 +753,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 10000, 10000, 50, 500 } diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 5af65f167d..00840ba373 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -724,14 +724,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80.0395, 80.0395, 400.48, 99.1 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -744,7 +744,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 500 } diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index daa2f0b6ec..b5381163cb 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -725,14 +725,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 700, 700, 100, 10000 } @@ -740,7 +740,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 35cb62a9bd..394dddff96 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 94 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 400, 400, 15, 50 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 71285deee5..bb63db7773 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -714,14 +714,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } @@ -734,7 +734,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 428fd0b0ef..29167fb0ad 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -836,7 +836,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -851,7 +851,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 100} @@ -864,7 +864,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 } diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 3fc7551028..fddc67c777 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -787,7 +787,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 100 @@ -802,7 +802,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 25 } @@ -810,7 +810,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 3000 } diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 5c8047fed3..e00a9dd309 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -799,7 +799,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 100 @@ -814,7 +814,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 25 } @@ -822,7 +822,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 3000 } diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 1555b6bef8..7aa8743cee 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -788,7 +788,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -803,7 +803,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } @@ -816,7 +816,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 45d54086d0..94d40e3160 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -788,7 +788,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -803,7 +803,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } @@ -816,7 +816,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index fa5067aca9..d3be8b8a28 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -788,7 +788,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -803,7 +803,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } @@ -816,7 +816,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 8539bb1610..b0bd127055 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -778,7 +778,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -793,7 +793,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } @@ -806,7 +806,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 905b3076f8..156c160e1c 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -793,7 +793,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -808,7 +808,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 200 } @@ -821,7 +821,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 7792f04210..40af0c36d5 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -778,7 +778,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 426.67 @@ -793,7 +793,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } @@ -806,7 +806,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 4229874768..fca8abff55 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -782,7 +782,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -797,7 +797,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 25000, 25000, 25000, 5000 } @@ -810,7 +810,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index f39a779333..1b68213306 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -778,7 +778,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -793,7 +793,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } @@ -806,7 +806,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 29da9d67f5..ca3fd4ac72 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -778,7 +778,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -793,7 +793,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } @@ -806,7 +806,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index d994e39770..f7e4f1ffcd 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -771,7 +771,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -786,7 +786,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } @@ -799,7 +799,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 } diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 3cc6eeeb0d..1b33f84ae0 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -781,7 +781,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 @@ -796,7 +796,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } @@ -809,7 +809,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 75bcd006c8..dc881d4606 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -727,14 +727,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 25, 25 } @@ -747,7 +747,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 800, 800, 700, 10000 } diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index e8482ab639..20cdd102d4 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -717,14 +717,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 ***** /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 } @@ -737,7 +737,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 } diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 8613b81cb7..7e61b7fac8 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -703,7 +703,7 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR @@ -714,7 +714,7 @@ /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR @@ -727,7 +727,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index 8aa573ada6..00eb9f1f70 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -719,14 +719,14 @@ /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.699959, 71.699959, 71.699959, 100.470955 } /** * Default Max Feed Rate (mm/s) * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_FEEDRATE { 83.333333, 83.333333, 19.5, 26.666666 } @@ -739,7 +739,7 @@ * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + * X, Y, Z, E0 [, E1[, E2...]] */ #define DEFAULT_MAX_ACCELERATION { 1200, 1200, 100, 10000 }