Move pins files to subfolders #14573

2019-07-11 02:32:24 -05:00
parent e5a5273edb
commit 7de605c5c3
169 changed files with 443 additions and 400 deletions
--- a/Marlin/src/pins/sam/pins_RAMPS_DUO.h
+++ b/Marlin/src/pins/sam/pins_RAMPS_DUO.h
@ -0,0 +1,131 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega or Due with RAMPS Duo pin assignments
+ *
+ * Applies to the following boards:
+ *
+ *  RAMPS_DUO_EFB (Hotend, Fan, Bed)
+ *  RAMPS_DUO_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_DUO_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_DUO_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_DUO_SF  (Spindle, Controller Fan)
+ *
+ *  Differences between
+ *  RAMPS_14 | RAMPS_DUO
+ *    A9/D63 | A12/D66
+ *   A10/D64 | A13/D67
+ *   A11/D65 | A14/D68
+ *   A12/D66 | A15/D69
+ *       A13 | A9
+ *       A14 | A10
+ *       A15 | A11
+ */
+
+#if !defined(__SAM3X8E__) && !defined(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_NAME "RAMPS Duo"
+
+#define IS_RAMPS_DUO
+#include "pins_RAMPS.h"
+
+//
+// Temperature Sensors
+//
+#undef TEMP_0_PIN
+#define TEMP_0_PIN          9   // Analog Input
+
+#undef TEMP_1_PIN
+#define TEMP_1_PIN         11   // Analog Input
+
+#undef TEMP_BED_PIN
+#define TEMP_BED_PIN       10   // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#undef MAX6675_SS_PIN
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS_PIN   69   // Do not use pin 53 if there is even the remote possibility of using Display/SD card
+#else
+  #define MAX6675_SS_PIN   69   // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+#endif
+
+//
+// LCD / Controller
+//
+#if HAS_SPI_LCD
+
+  #if BOTH(NEWPANEL, PANEL_ONE)
+    #undef LCD_PINS_D4
+    #define LCD_PINS_D4  68
+
+    #undef LCD_PINS_D5
+    #define LCD_PINS_D5  69
+
+    #undef LCD_PINS_D7
+    #define LCD_PINS_D7  67
+  #endif
+
+  #if ENABLED(NEWPANEL)
+
+    #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+      #undef BTN_EN1
+      #define BTN_EN1 67
+
+      #undef BTN_ENC
+      #define BTN_ENC 66
+
+    #elif ENABLED(MINIPANEL)
+
+      #undef DOGLCD_CS
+      #define DOGLCD_CS    69
+
+      #undef LCD_BACKLIGHT_PIN
+      #define LCD_BACKLIGHT_PIN 68   // backlight LED on A14/D68
+
+      #undef KILL_PIN
+      #define KILL_PIN     67
+
+      #undef BTN_EN2
+      #define BTN_EN2      66
+
+    #else
+
+      #if ENABLED(REPRAPWORLD_KEYPAD)
+        #undef BTN_EN1
+        #define BTN_EN1    67   // encoder
+
+        #undef BTN_ENC
+        #define BTN_ENC    66   // enter button
+      #elif ENABLED(PANEL_ONE)
+        #undef BTN_EN2
+        #define BTN_EN2    66   // AUX2 PIN 4
+      #endif
+    #endif
+
+  #endif // NEWPANEL
+
+#endif // HAS_SPI_LCD