bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Add "About Printer" information menu.

Browse Source 
Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.
This commit is contained in:
Anthony Birkett 2016-06-30 10:24:29 +01:00 committed by Scott Lahteine
parent 77a923d8ce
commit 7a377c1d75
82 changed files with 526 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Marlin/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

16
Marlin/dogm_lcd_implementation.h
View File

@ -473,6 +473,22 @@ static void lcd_implementation_mark_as_selected(uint8_t row, bool isSelected) {
u8g.setPrintPos((START_ROW) * (DOG_CHAR_WIDTH), (row + 1) * (DOG_CHAR_HEIGHT));
}
static void lcd_implementation_drawmenu_static(uint8_t row, const char* pstr, bool center=true) {
char c;
uint8_t n = LCD_WIDTH;
u8g.setPrintPos(0, (row + 1) * (DOG_CHAR_HEIGHT));
u8g.setColorIndex(1); // normal text
if (center) {
int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
while (--pad >= 0) { lcd_print(' '); n--; }
}
while (c = pgm_read_byte(pstr)) {
n -= lcd_print(c);
pstr++;
}
while (n--) lcd_print(' ');
}
static void lcd_implementation_drawmenu_generic(bool isSelected, uint8_t row, const char* pstr, char pre_char, char post_char) {
UNUSED(pstr);
UNUSED(pre_char);

3
Marlin/example_configurations/Cartesio/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@ -370,6 +370,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/RigidBot/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/TAZ4/Configuration_adv.h
View File

@ -372,6 +372,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View File

@ -366,6 +366,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@ -366,6 +366,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@ -365,6 +365,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@ -370,6 +370,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@ -366,6 +366,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

3
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@ -364,6 +364,9 @@
// @section lcd
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

39
Marlin/language_en.h
View File

@ -520,5 +520,44 @@
#ifndef MSG_DELTA_CALIBRATE_CENTER
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif
#ifndef MSG_INFO_MENU
#define MSG_INFO_MENU "About Printer"
#endif
#ifndef MSG_INFO_STATS_MENU
#define MSG_INFO_STATS_MENU "Printer Stats"
#endif
#ifndef MSG_INFO_BOARD_MENU
#define MSG_INFO_BOARD_MENU "Board Info"
#endif
#ifndef MSG_INFO_THERMISTOR_MENU
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
#endif
#ifndef MSG_INFO_EXTRUDERS
#define MSG_INFO_EXTRUDERS "Extruders"
#endif
#ifndef MSG_INFO_BAUDRATE
#define MSG_INFO_BAUDRATE "Baud"
#endif
#ifndef MSG_INFO_PROTOCOL
#define MSG_INFO_PROTOCOL "Protocol"
#endif
#ifndef MSG_INFO_TOTAL_PRINTS
#define MSG_INFO_TOTAL_PRINTS "Total Prints"
#endif
#ifndef MSG_INFO_FINISHED_PRINTS
#define MSG_INFO_FINISHED_PRINTS "Finished Prints"
#endif
#ifndef MSG_INFO_PRINT_TIME
#define MSG_INFO_PRINT_TIME "Total Print Time"
#endif
#ifndef MSG_INFO_MIN_TEMP
#define MSG_INFO_MIN_TEMP "Min Temp"
#endif
#ifndef MSG_INFO_MAX_TEMP
#define MSG_INFO_MAX_TEMP "Max Temp"
#endif
#ifndef MSG_INFO_PSU
#define MSG_INFO_PSU "Power Supply"
#endif
#endif // LANGUAGE_EN_H

15
Marlin/pins_3DRAG.h
View File

@ -24,10 +24,19 @@
* 3DRAG (and K8200) Arduino Mega with RAMPS v1.4 pin assignments
*/
#include "pins_RAMPS_14.h"
#ifndef BOARD_NAME
#define BOARD_NAME "3Drag"
#endif
#define DEFAULT_MACHINE_NAME "3Drag"
#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME "3Drag"
#endif
#ifndef DEFAULT_SOURCE_CODE_URL
#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
#endif
#include "pins_RAMPS_14.h"
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 63

1
Marlin/pins_5DPRINT.h
View File

@ -31,6 +31,7 @@
#endif
#define DEFAULT_MACHINE_NAME "Makibox"
#define BOARD_NAME "5DPrint D8"
#define LARGE_FLASH true

1
Marlin/pins_99.h
View File

@ -23,6 +23,7 @@
/**
* Board 99 pin assignments
*/
#define BOARD_NAME "99 Unknown"
#define X_STEP_PIN 2
#define X_DIR_PIN 3

2
Marlin/pins_A4JP.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "AJ4P"
// Servo support
#define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2

3
Marlin/pins_AZTEEG_X1.h
View File

@ -24,6 +24,7 @@
* Azteeg X1 pin assignments
*/
#define SANGUINOLOLU_V_1_2
#define BOARD_NAME "Azteeg X1"
#define SANGUINOLOLU_V_1_2
#include "pins_SANGUINOLOLU_11.h"

2
Marlin/pins_AZTEEG_X3.h
View File

@ -24,6 +24,8 @@
* AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
*/
#define BOARD_NAME "Azteeg X3"
#include "pins_RAMPS_14_EFB.h"
#if ENABLED(VIKI2) || ENABLED(miniVIKI)

2
Marlin/pins_AZTEEG_X3_PRO.h
View File

@ -24,6 +24,8 @@
* AZTEEG_X3_PRO (Arduino Mega) pin assignments
*/
#define BOARD_NAME "Azteeg X3 Pro"
#include "pins_RAMPS_14.h"
#undef FAN_PIN

2
Marlin/pins_BAM_DICE_DUE.h
View File

@ -24,6 +24,8 @@
* BAM&DICE Due (Arduino Mega) pin assignments
*/
#define BOARD_NAME "2PrintBeta Due"
#include "pins_RAMPS_14_EFB.h"
#undef TEMP_0_PIN

2
Marlin/pins_BQ_ZUM_MEGA_3D.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "ZUM Mega 3D"
#include "pins_RAMPS_13.h"
#undef X_MAX_PIN

2
Marlin/pins_BRAINWAVE.h
View File

@ -31,6 +31,8 @@
#error "Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Brainwave"
#define X_STEP_PIN 27
#define X_DIR_PIN 29
#define X_ENABLE_PIN 28

2
Marlin/pins_BRAINWAVE_PRO.h
View File

@ -37,6 +37,8 @@
#error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
#endif
#define BOARD_NAME "Brainwave Pro"
#define LARGE_FLASH true
#define X_STEP_PIN 33

1
Marlin/pins_CHEAPTRONIC.h
View File

@ -28,6 +28,7 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Cheaptronic v1.0"
#define LARGE_FLASH true
// X motor stepper

2
Marlin/pins_CNCONTROLS_12.h
View File

@ -6,6 +6,8 @@
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define BOARD_NAME "CN Controls V12"
//#define LARGE_FLASH true
#define X_ENABLE_PIN 26

2
Marlin/pins_ELEFU_3.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Elefu Ra v3"
#define X_STEP_PIN 49
#define X_DIR_PIN 13
#define X_ENABLE_PIN 48

2
Marlin/pins_FELIX2.h
View File

@ -24,6 +24,8 @@
* FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments
*/
#define BOARD_NAME "Felix 2.0+"
#include "pins_RAMPS_14_EFB.h"
#undef HEATER_1_PIN

1
Marlin/pins_GEN3_MONOLITHIC.h
View File

@ -28,6 +28,7 @@
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Gen3 Monolithic"
#define DEBUG_PIN 0
// x axis

2
Marlin/pins_GEN3_PLUS.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Gen3+"
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_STOP_PIN 20

4
Marlin/pins_GEN6.h
View File

@ -30,6 +30,10 @@
#endif
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Gen6"
#endif
//x axis pins
#define X_STEP_PIN 15
#define X_DIR_PIN 18

2
Marlin/pins_GEN6_DELUXE.h
View File

@ -24,4 +24,6 @@
* Gen6 Deluxe pin assignments
*/
#define BOARD_NAME "Gen6 Deluxe"
#include "pins_GEN6.h"

4
Marlin/pins_GEN7_12.h
View File

@ -28,6 +28,10 @@
#error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Gen7 v1.1 / 1.2"
#endif
#ifndef GEN7_VERSION
#define GEN7_VERSION 12 // v1.x
#endif

4
Marlin/pins_GEN7_13.h
View File

@ -24,7 +24,7 @@
* Gen7 v1.3 pin assignments
*/
#define MOTHERBOARD BOARD_GEN7_12
#define GEN7_VERSION 13 // v1.3
#define BOARD_NAME "Gen7 v1.3"
#define GEN7_VERSION 13 // v1.3
#include "pins_GEN7_12.h"

6
Marlin/pins_GEN7_14.h
View File

@ -24,12 +24,14 @@
* Gen7 v1.4 pin assignments
*/
#define GEN7_VERSION 14 // v1.4
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
#error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Gen7 v1.4"
#define GEN7_VERSION 14 // v1.4
//x axis pins
#define X_STEP_PIN 29
#define X_DIR_PIN 28

2
Marlin/pins_GEN7_CUSTOM.h
View File

@ -31,6 +31,8 @@
#error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Gen7 Custom"
//x axis pins
#define X_STEP_PIN 21 // different from standard GEN7
#define X_DIR_PIN 20 // different from standard GEN7

8
Marlin/pins_K8200.h
View File

@ -25,10 +25,8 @@
* Identical to 3DRAG
*/
#include "pins_3DRAG.h"
#undef DEFAULT_MACHINE_NAME
#define BOARD_NAME "Velleman K8200"
#define DEFAULT_MACHINE_NAME "K8200"
#undef DEFAULT_SOURCE_CODE_URL
#define DEFAULT_SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200"
#include "pins_3DRAG.h"

2
Marlin/pins_LEAPFROG.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Leapfrog"
#define X_STEP_PIN 28
#define X_DIR_PIN 63
#define X_ENABLE_PIN 29

2
Marlin/pins_MEGACONTROLLER.h
View File

@ -32,6 +32,8 @@
#error "Mega Controller supports up to 2 extruders. Comment this line to keep going."
#endif
#define BOARD_NAME "Mega Controller"
#define SERVO0_PIN 30
#define SERVO1_PIN 31
#define SERVO2_PIN 32

1
Marlin/pins_MEGATRONICS.h
View File

@ -28,6 +28,7 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Megatronics"
#define LARGE_FLASH true
#define X_STEP_PIN 26

1
Marlin/pins_MEGATRONICS_2.h
View File

@ -28,6 +28,7 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Megatronics v2.0"
#define LARGE_FLASH true
#define X_STEP_PIN 26

1
Marlin/pins_MEGATRONICS_3.h
View File

@ -28,6 +28,7 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Megatronics v3.0"
#define LARGE_FLASH true
#if ENABLED(Z_PROBE_SLED)

3
Marlin/pins_MELZI.h
View File

@ -24,10 +24,11 @@
* Melzi pin assignments
*/
#define SANGUINOLOLU_V_1_2
#define BOARD_NAME "Melzi"
#if defined(__AVR_ATmega1284P__)
#define LARGE_FLASH true
#endif
#define SANGUINOLOLU_V_1_2
#include "pins_SANGUINOLOLU_11.h"

5
Marlin/pins_MELZI_MAKR3D.h
View File

@ -24,12 +24,11 @@
* Melzi with ATmega1284 (MaKr3d version) pin assignments
*/
#undef MOTHERBOARD
#define MOTHERBOARD BOARD_MELZI
#define SANGUINOLOLU_V_1_2
#define BOARD_NAME "Melzi ATmega1284"
#if defined(__AVR_ATmega1284P__)
#define LARGE_FLASH true
#endif
#define SANGUINOLOLU_V_1_2
#include "pins_SANGUINOLOLU_11.h"

1
Marlin/pins_MINIRAMBO.h
View File

@ -28,6 +28,7 @@
#error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Mini Rambo"
#define LARGE_FLASH true
#define X_STEP_PIN 37

1
Marlin/pins_MINITRONICS.h
View File

@ -28,6 +28,7 @@
#error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Minitronics v1.0 / v1.1"
#define LARGE_FLASH true
#define X_STEP_PIN 48

2
Marlin/pins_MKS_13.h
View File

@ -29,6 +29,8 @@
* MKS v1.4 (Extruder, Extruder, Fan, Bed)
*/
#define BOARD_NAME "MKS > v1.3"
#include "pins_RAMPS_14_EFB.h"
#undef HEATER_1_PIN

2
Marlin/pins_MKS_BASE.h
View File

@ -24,6 +24,8 @@
* MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
*/
#define BOARD_NAME "MKS BASE 1.0"
#include "pins_RAMPS_14_EFB.h"
#undef HEATER_1_PIN

2
Marlin/pins_OMCA.h
View File

@ -55,6 +55,8 @@
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)"
#endif
#define BOARD_NAME "Final OMCA"
#define X_STEP_PIN 26
#define X_DIR_PIN 25
#define X_ENABLE_PIN 10

2
Marlin/pins_OMCA_A.h
View File

@ -54,6 +54,8 @@
#error "Oops! Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Alpha OMCA"
#define X_STEP_PIN 21
#define X_DIR_PIN 20
#define X_ENABLE_PIN 24

1
Marlin/pins_PRINTRBOARD.h
View File

@ -35,6 +35,7 @@
#error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
#endif
#define BOARD_NAME "Printrboard"
#define LARGE_FLASH true
// Disable JTAG pins so they can be used for the Extrudrboard

1
Marlin/pins_PRINTRBOARD_REVF.h
View File

@ -35,6 +35,7 @@
#error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
#endif
#define BOARD_NAME "Printrboard Rev F"
#define LARGE_FLASH true
#define X_STEP_PIN 0

2
Marlin/pins_RAMBO.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Rambo"
#define LARGE_FLASH true
// Servo support

5
Marlin/pins_RAMPS_13.h
View File

@ -33,6 +33,9 @@
*
*/
#define IS_RAMPS_13
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.3"
#endif
#define IS_RAMPS_13
#include "pins_RAMPS_14.h"

3
Marlin/pins_RAMPS_13_EFB.h
View File

@ -26,6 +26,7 @@
* RAMPS_13_EFB (Extruder, Fan, Bed)
*/
#define IS_RAMPS_13
#define BOARD_NAME "RAMPS 1.3 EFB"
#define IS_RAMPS_13
#include "pins_RAMPS_14_EFB.h"

4
Marlin/pins_RAMPS_14.h
View File

@ -48,6 +48,10 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.4"
#endif
#define LARGE_FLASH true
#ifdef IS_RAMPS_13

5
Marlin/pins_RAMPS_14_EFB.h
View File

@ -26,6 +26,9 @@
* RAMPS_14_EFB (Extruder, Fan, Bed)
*/
#define IS_RAMPS_EFB
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.4 EFB"
#endif
#define IS_RAMPS_EFB
#include "pins_RAMPS_14.h"

2
Marlin/pins_RAMPS_OLD.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "MEGA/RAMPS <1.2"
// Uncomment the following line for RAMPS v1.0
//#define RAMPS_V_1_0

3
Marlin/pins_RIGIDBOARD.h
View File

@ -26,6 +26,9 @@
#include "pins_RAMPS_14.h"
#undef BOARD_NAME
#define BOARD_NAME "RigidBoard"
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
#undef Z_MAX_PIN
#define Z_MAX_PIN -1

3
Marlin/pins_RIGIDBOARD_V2.h
View File

@ -26,6 +26,9 @@
#include "pins_RIGIDBOARD.h"
#undef BOARD_NAME
#define BOARD_NAME "RigidBoard V2"
// I2C based DAC like on the Printrboard REVF
#define DAC_STEPPER_CURRENT
// Channels available for DAC, For Rigidboard there are 4

1
Marlin/pins_RUMBA.h
View File

@ -33,6 +33,7 @@
#endif
#define DEFAULT_MACHINE_NAME "Rumba"
#define BOARD_NAME "Rumba"
#define X_STEP_PIN 17
#define X_DIR_PIN 16

3
Marlin/pins_SAINSMART_2IN1.h
View File

@ -26,6 +26,9 @@
#include "pins_RAMPS_14_EFB.h"
#undef BOARD_NAME
#define BOARD_NAME "Sainsmart"
#undef FAN_PIN
#define FAN_PIN 7 // PART FAN in front of board next to Extruder heat

14
Marlin/pins_SANGUINOLOLU_11.h
View File

@ -28,6 +28,12 @@
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Sanguinololu <1.2"
#endif
#define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D))
#define X_STEP_PIN 15
#define X_DIR_PIN 21
#define X_STOP_PIN 18
@ -43,11 +49,11 @@
#define E0_STEP_PIN 1
#define E0_DIR_PIN 0
#if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI)
#if MB(AZTEEG_X1) || MB(STB_11) || IS_MELZI
#define FAN_PIN 4 // Works for Panelolu2 too
#endif
#if MB(MELZI)
#if IS_MELZI
#define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
#elif MB(STB_11)
#define LCD_PIN_BL 17 // LCD backlight LED
@ -101,7 +107,7 @@
#if ENABLED(U8GLIB_ST7920) //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if MB(MELZI) // Melzi board
#if IS_MELZI // Melzi board
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 29 //SID (MOSI)
#define LCD_PINS_D4 17 //SCK (CLK) clock
@ -147,7 +153,7 @@
#define BTN_EN1 11
#define BTN_EN2 10
#if ENABLED(LCD_I2C_PANELOLU2)
#if MB(MELZI)
#if IS_MELZI
#define BTN_ENC 29
#define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
#else

3
Marlin/pins_SANGUINOLOLU_12.h
View File

@ -32,10 +32,11 @@
* STB_11
*/
#define SANGUINOLOLU_V_1_2
#define BOARD_NAME "Sanguinololu 1.2"
#if defined(__AVR_ATmega1284P__)
#define LARGE_FLASH true
#endif
#define SANGUINOLOLU_V_1_2
#include "pins_SANGUINOLOLU_11.h"

1
Marlin/pins_SAV_MKI.h
View File

@ -33,6 +33,7 @@
#define DEFAULT_MACHINE_NAME "SAV MkI"
#define DEFAULT_SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
#define BOARD_NAME "SAV MkI"
#define LARGE_FLASH true

2
Marlin/pins_SETHI.h
View File

@ -28,6 +28,8 @@
#error "Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Sethi 3D_1"
#ifndef GEN7_VERSION
#define GEN7_VERSION 12 // v1.x
#endif

3
Marlin/pins_STB_11.h
View File

@ -24,10 +24,11 @@
* STB V1.1 pin assignments
*/
#define SANGUINOLOLU_V_1_2
#define BOARD_NAME "STB V1.1"
#if defined(__AVR_ATmega1284P__)
#define LARGE_FLASH true
#endif
#define SANGUINOLOLU_V_1_2
#include "pins_SANGUINOLOLU_11.h"

2
Marlin/pins_TEENSY2.h
View File

@ -74,6 +74,8 @@
// (or build from command line)
#endif
#define BOARD_NAME "Teensy++2.0"
#define LARGE_FLASH true
#define X_STEP_PIN 28 // 0 Marlin

2
Marlin/pins_TEENSYLU.h
View File

@ -35,6 +35,8 @@
#error "These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
#endif
#define BOARD_NAME "Teensylu"
#define LARGE_FLASH true
#define X_STEP_PIN 0

1
Marlin/pins_ULTIMAIN_2.h
View File

@ -30,6 +30,7 @@
#define DEFAULT_MACHINE_NAME "Ultimaker"
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
#define BOARD_NAME "Ultimaker 2.x"
#define X_STEP_PIN 25
#define X_DIR_PIN 23

1
Marlin/pins_ULTIMAKER.h
View File

@ -30,6 +30,7 @@
#define DEFAULT_MACHINE_NAME "Ultimaker"
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
#define BOARD_NAME "Ultimaker"
#define LARGE_FLASH true

1
Marlin/pins_ULTIMAKER_OLD.h
View File

@ -30,6 +30,7 @@
#define DEFAULT_MACHINE_NAME "Ultimaker"
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
#define BOARD_NAME "Ultimaker <1.5.4"
#define LARGE_FLASH true

6
Marlin/printcounter.h
View File

@ -131,6 +131,12 @@ class PrintCounter: public Stopwatch {
*/
void showStats();
/**
* @brief Return the currently loaded statistics
* @details Return the raw data, in the same structure used internally
*/
printStatistics getStats() { return this->data; }
/**
* @brief Loop function
* @details This function should be called at loop, it will take care of

91
Marlin/thermistornames.h Normal file
View File

@ -0,0 +1,91 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#undef THERMISTOR_NAME
// Thermcouples
#if THERMISTOR_ID == -3
#define THERMISTOR_NAME "MAX31855"
#elif THERMISTOR_ID == -2
#define THERMISTOR_NAME "MAX6675"
#elif THERMISTOR_ID == -1
#define THERMISTOR_NAME "AD595"
// Standard thermistors
#elif THERMISTOR_ID == 1
#define THERMISTOR_NAME "EPCOS 100K"
#elif THERMISTOR_ID == 2
#define THERMISTOR_NAME "ATC 204GT-2"
#elif THERMISTOR_ID == 3
#define THERMISTOR_NAME "Mendel-parts"
#elif THERMISTOR_ID == 4
#define THERMISTOR_NAME "Generic 10K"
#elif THERMISTOR_ID == 5
#define THERMISTOR_NAME "ATC 104GT-2"
#elif THERMISTOR_ID == 6
#define THERMISTOR_NAME "EPCOS (alt)"
#elif THERMISTOR_ID == 7
#define THERMISTOR_NAME "HW 104LAG"
#elif THERMISTOR_ID == 71
#define THERMISTOR_NAME "HW 104LAF"
#elif THERMISTOR_ID == 8
#define THERMISTOR_NAME "E3104FXT"
#elif THERMISTOR_ID == 9
#define THERMISTOR_NAME "GE AL03006"
#elif THERMISTOR_ID == 10
#define THERMISTOR_NAME "RS 198-961"
#elif THERMISTOR_ID == 11
#define THERMISTOR_NAME "1% beta 3950"
#elif THERMISTOR_ID == 12
#define THERMISTOR_NAME "E3104FXT (alt)"
#elif THERMISTOR_ID == 13
#define THERMISTOR_NAME "Hisens 3950"
#elif THERMISTOR_ID == 20
#define THERMISTOR_NAME "PT100 UltiMB"
#elif THERMISTOR_ID == 60
#define THERMISTOR_NAME "Makers Tool"
#elif THERMISTOR_ID == 70
#define THERMISTOR_NAME "Hephestos 2"
// Modified thermistors
#elif THERMISTOR_ID == 51
#define THERMISTOR_NAME "EPCOS 1K"
#elif THERMISTOR_ID == 52
#define THERMISTOR_NAME "ATC204GT-2 1K"
#elif THERMISTOR_ID == 55
#define THERMISTOR_NAME "ATC104GT-2 1K"
#elif THERMISTOR_ID == 1047
#define THERMISTOR_NAME "PT1000 4K7"
#elif THERMISTOR_ID == 1010
#define THERMISTOR_NAME "PT1000 1K"
#elif THERMISTOR_ID == 147
#define THERMISTOR_NAME "PT100 4K7"
#elif THERMISTOR_ID == 110
#define THERMISTOR_NAME "PT100 1K"
// Dummies for dev testing
#elif THERMISTOR_ID == 998
#define THERMISTOR_NAME "Dummy 1"
#elif THERMISTOR_ID == 999
#define THERMISTOR_NAME "Dummy 2"
#endif // THERMISTOR_ID

171
Marlin/ultralcd.cpp
View File

@ -29,6 +29,10 @@
#include "stepper.h"
#include "configuration_store.h"
#if ENABLED(PRINTCOUNTER)
#include "printcounter.h"
#endif
int plaPreheatHotendTemp;
int plaPreheatHPBTemp;
int plaPreheatFanSpeed;
@ -117,6 +121,15 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
static void lcd_control_motion_menu();
static void lcd_control_volumetric_menu();
#if ENABLED(LCD_INFO_MENU)
#if ENABLED(PRINTCOUNTER)
static void lcd_info_stats_menu();
#endif
static void lcd_info_thermistors_menu();
static void lcd_info_board_menu();
static void lcd_info_menu();
#endif
#if HAS_LCD_CONTRAST
static void lcd_set_contrast();
#endif
@ -189,6 +202,12 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
/**
* START_MENU generates the init code for a menu function
*
* encoderLine is the position based on the encoder
* currentMenuViewOffset is the top menu line to display
* _drawLineNr is the index of the LCD line (0-3)
* _lineNr is the menu item to draw and process
* _menuItemNr is the index of each MENU_ITEM
*/
#define START_MENU() do { \
ENCODER_DIRECTION_MENUS(); \
@ -242,6 +261,26 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
_MENU_ITEM_PART_2(type, ## args); \
} while(0)
// Used to print static text with no visible cursor.
#define STATIC_ITEM(label, args...) \
if (_menuItemNr == _lineNr) { \
if (encoderLine == _menuItemNr && _menuItemNr < LCD_HEIGHT - 1) \
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
if (lcdDrawUpdate) \
lcd_implementation_drawmenu_static(_drawLineNr, PSTR(label), ## args); \
} \
_menuItemNr++
// Same as STATIC_ITEM, but can display variables. Do not use for text strings.
#define STATIC_ITEM_VAR(label, args...) \
if (_menuItemNr == _lineNr) { \
if (encoderLine == _menuItemNr && _menuItemNr < LCD_HEIGHT - 1) \
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
if (lcdDrawUpdate) \
lcd_implementation_drawmenu_static(_drawLineNr, label, ## args); \
} \
_menuItemNr++
#if ENABLED(ENCODER_RATE_MULTIPLIER)
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
@ -554,6 +593,10 @@ static void lcd_status_screen() {
}
#endif //SDSUPPORT
#if ENABLED(LCD_INFO_MENU)
MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
#endif
END_MENU();
}
@ -1870,6 +1913,134 @@ static void lcd_status_screen() {
#endif //SDSUPPORT
#if ENABLED(LCD_INFO_MENU)
#if ENABLED(PRINTCOUNTER)
/**
*
* Printer Info > Stastics submenu
*
*/
static void lcd_info_stats_menu() {
PrintCounter print_job_counter = PrintCounter();
print_job_counter.loadStats();
printStatistics stats = print_job_counter.getStats();
char totalPrints[18];
itoa(stats.totalPrints, totalPrints, 10);
char finishedPrints[18];
itoa(stats.finishedPrints, finishedPrints, 10);
char printTime[18];
itoa(stats.printTime, printTime, 10);
if (LCD_CLICKED) lcd_goto_previous_menu(true);
START_MENU();
STATIC_ITEM(MSG_INFO_TOTAL_PRINTS ": "); // Total Prints:
STATIC_ITEM_VAR(totalPrints); // 999
STATIC_ITEM(MSG_INFO_FINISHED_PRINTS ": "); // Finished Prints:
STATIC_ITEM_VAR(finishedPrints); // 666
STATIC_ITEM(MSG_INFO_PRINT_TIME ": "); // Total Print Time:
STATIC_ITEM_VAR(printTime); // 123456
END_MENU();
}
#endif
/**
*
* Printer Info > Thermistors
*
*/
static void lcd_info_thermistors_menu() {
if (LCD_CLICKED) lcd_goto_previous_menu(true);
START_MENU();
#define THERMISTOR_ID TEMP_SENSOR_0
#include "thermistornames.h"
STATIC_ITEM("T0: " THERMISTOR_NAME);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_0_MINTEMP));
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_0_MAXTEMP));
#if TEMP_SENSOR_1 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_1
#include "thermistornames.h"
STATIC_ITEM("T1: " THERMISTOR_NAME);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_1_MINTEMP));
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_1_MAXTEMP));
#endif
#if TEMP_SENSOR_2 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_2
#include "thermistornames.h"
STATIC_ITEM("T2: " THERMISTOR_NAME);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_2_MINTEMP));
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_2_MAXTEMP));
#endif
#if TEMP_SENSOR_3 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_3
#include "thermistornames.h"
STATIC_ITEM("T3: " THERMISTOR_NAME);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_3_MINTEMP));
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_3_MAXTEMP));
#endif
#if TEMP_SENSOR_BED != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_BED
#include "thermistornames.h"
STATIC_ITEM("TBed:" THERMISTOR_NAME);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(BED_MINTEMP));
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(BED_MAXTEMP));
#endif
END_MENU();
}
/**
*
* Printer Info > Board Info
*
*/
static void lcd_info_board_menu() {
if (LCD_CLICKED) lcd_goto_previous_menu(true);
START_MENU();
STATIC_ITEM(BOARD_NAME); // MyPrinterController
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE)); // Baud: 250000
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION); // Protocol: 1.0
#ifdef POWER_SUPPLY
#if (POWER_SUPPLY == 1)
STATIC_ITEM(MSG_INFO_PSU ": ATX"); // Power Supply: ATX
#elif (POWER_SUPPLY == 2)
STATIC_ITEM(MSG_INFO_PSU ": XBox"); // Power Supply: XBox
#endif
#endif // POWER_SUPPLY
END_MENU();
}
/**
*
* "Printer Info" submenu
*
*/
static void lcd_info_menu() {
START_MENU();
MENU_ITEM(back, MSG_INFO_MENU);
STATIC_ITEM(MSG_MARLIN); // Marlin
STATIC_ITEM(SHORT_BUILD_VERSION); // x.x.x-Branch
STATIC_ITEM(STRING_DISTRIBUTION_DATE); // YYYY-MM-DD HH:MM
STATIC_ITEM(MACHINE_NAME); // My3DPrinter
STATIC_ITEM(WEBSITE_URL); // www.my3dprinter.com
STATIC_ITEM(MSG_INFO_EXTRUDERS ": " STRINGIFY(EXTRUDERS)); // Extruders: 2
MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, lcd_info_board_menu); // Board Info ->
MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, lcd_info_thermistors_menu); // Thermistors ->
#if ENABLED(PRINTCOUNTER)
MENU_ITEM(submenu, MSG_INFO_STATS_MENU, lcd_info_stats_menu); // Printer Statistics ->
#endif
END_MENU();
}
#endif // LCD_INFO_MENU
/**
*
* Functions for editing single values

15
Marlin/ultralcd_implementation_hitachi_HD44780.h
View File

@ -815,6 +815,21 @@ static void lcd_implementation_status_screen() {
lcd_print(lcd_status_message);
}
static void lcd_implementation_drawmenu_static(uint8_t row, const char* pstr, bool center=true) {
char c;
uint8_t n = LCD_WIDTH;
lcd.setCursor(0, row);
if (center) {
int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
while (--pad >= 0) { lcd.print(' '); n--; }
}
while ((c = pgm_read_byte(pstr)) && n > 0) {
n -= lcd_print(c);
pstr++;
}
while (n--) lcd.print(' ');
}
static void lcd_implementation_drawmenu_generic(bool sel, uint8_t row, const char* pstr, char pre_char, char post_char) {
char c;
uint8_t n = LCD_WIDTH - 2;