bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Proposed changes to ST7920 lightweight status screen

Browse Source
This commit is contained in:
Scott Lahteine
2018-02-16 01:04:15 -06:00
parent 24eb275b99
commit 79272f98fc
73 changed files with 1631 additions and 1198 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
Marlin/src/config/default/Configuration.h
View File

@ -1513,18 +1513,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/default/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View File

@ -1513,18 +1513,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

11
Marlin/src/config/examples/Anet/A6/Configuration.h
View File

@ -1661,18 +1661,9 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

13
Marlin/src/config/examples/Anet/A8/Configuration.h
View File

@ -1516,7 +1516,6 @@
//
//#define G3D_PANEL
//
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
@ -1525,18 +1524,6 @@
//
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic
// controller and SD support - http://reprap.org/wiki/Mini_panel

16
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
View File

@ -646,6 +646,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View File

@ -1513,18 +1513,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

11
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View File

@ -1513,18 +1513,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Felix/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View File

@ -1519,18 +1519,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View File

@ -1517,18 +1517,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View File

@ -1524,18 +1524,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -653,6 +653,22 @@
#define DOGLCD_MOSI MOSI_PIN
#endif
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

12
Marlin/src/config/examples/RigidBot/Configuration.h
View File

@ -1515,18 +1515,6 @@
//
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic
// controller and SD support - http://reprap.org/wiki/Mini_panel

16
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/SCARA/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/STM32F10/Configuration.h
View File

@ -1516,18 +1516,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

11
Marlin/src/config/examples/Sanguinololu/Configuration.h
View File

@ -1544,18 +1544,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View File

@ -642,6 +642,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View File

@ -1498,18 +1498,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

11
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View File

@ -1513,18 +1513,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View File

@ -1546,18 +1546,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -658,6 +658,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View File

@ -1513,18 +1513,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View File

@ -1507,18 +1507,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -647,6 +647,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -647,6 +647,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -647,6 +647,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -647,6 +647,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View File

@ -647,6 +647,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View File

@ -1637,18 +1637,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -647,6 +647,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
View File

@ -652,6 +652,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -647,6 +647,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View File

@ -1527,18 +1527,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

11
Marlin/src/config/examples/makibox/Configuration.h
View File

@ -1516,18 +1516,7 @@
// RepRapDiscount FULL GRAPHIC Smart Controller
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// If USE_ST7920_LIGHTWEIGHT_UI is uncommented, then an alternative
// light-weight status screen will be used that takes advantage of
// the ST7920 character-generator to conserve MCU resources.
//
// Since the lightweight status screen can only show a status
// message or the position, but not both, set DELAY_TO_SHOW_POSITION
// to the number of seconds until the position is revealed after a new
// status message is drawn.
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//#define USE_ST7920_LIGHTWEIGHT_UI
//#define DELAY_TO_SHOW_POSITION 20
//
// MakerLab Mini Panel with graphic

16
Marlin/src/config/examples/makibox/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -645,6 +645,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety

16
Marlin/src/config/examples/wt150/Configuration_adv.h
View File

@ -646,6 +646,22 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
#endif
#endif
#endif // DOGLCD
// @section safety