Edit configuration comments
This commit is contained in:
Scott Lahteine
@@ -987,23 +987,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1011,44 +1005,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1073,33 +1067,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1108,78 +1104,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1207,7 +1204,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -985,23 +985,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1009,44 +1003,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1071,33 +1065,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1106,78 +1102,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1205,7 +1202,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -969,23 +969,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -993,44 +987,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1055,33 +1049,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1090,78 +1086,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
//#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1189,7 +1186,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -969,23 +969,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -993,44 +987,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1055,33 +1049,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1090,78 +1086,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
//#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1189,7 +1186,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -991,23 +991,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1015,44 +1009,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1077,33 +1071,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1112,78 +1108,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1211,7 +1208,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -977,23 +977,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1001,44 +995,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1063,33 +1057,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1098,78 +1094,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
//#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1197,7 +1194,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -980,23 +980,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1004,44 +998,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 10 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1066,33 +1060,35 @@
|
||||
//#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1101,78 +1097,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1200,7 +1197,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1015,23 +1015,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1039,44 +1033,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1101,33 +1095,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1139,78 +1135,79 @@
|
||||
// K8200: for Display VM8201 with SD slot
|
||||
#if ENABLED(K8200_VM8201)
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1238,7 +1235,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -986,23 +986,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 0
|
||||
#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1010,44 +1004,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1072,33 +1066,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1107,78 +1103,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1206,7 +1203,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -986,23 +986,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 0
|
||||
#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1010,44 +1004,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1072,33 +1066,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1107,78 +1103,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1206,7 +1203,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -986,23 +986,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1010,44 +1004,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1072,33 +1066,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1107,78 +1103,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1206,7 +1203,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -985,23 +985,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1009,44 +1003,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1071,33 +1065,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1106,78 +1102,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1205,7 +1202,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1001,23 +1001,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1025,44 +1019,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1087,33 +1081,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1122,78 +1118,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
//#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1221,7 +1218,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1006,23 +1006,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1030,44 +1024,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1092,33 +1086,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1127,78 +1123,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1226,7 +1223,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1042,23 +1042,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 90 // TB2: ABS default 110, 90 is the maximum temp at 12V supply
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1066,44 +1060,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1128,33 +1122,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1163,78 +1159,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1262,7 +1259,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -977,23 +977,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1001,44 +995,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1063,33 +1057,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1098,78 +1094,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
//#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1197,7 +1194,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -986,23 +986,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1010,44 +1004,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1072,33 +1066,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1107,78 +1103,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1206,7 +1203,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1104,23 +1104,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1128,44 +1122,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1190,33 +1184,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1225,78 +1221,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 WESTERN
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1324,7 +1321,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1106,23 +1106,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1130,44 +1124,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1192,33 +1186,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1227,78 +1223,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 WESTERN
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1326,7 +1323,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1093,23 +1093,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1117,44 +1111,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1179,33 +1173,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1214,78 +1210,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1313,7 +1310,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1096,23 +1096,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1120,44 +1114,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1182,33 +1176,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1217,78 +1213,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1316,7 +1313,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1102,23 +1102,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1126,44 +1120,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1188,33 +1182,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1223,78 +1219,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1322,7 +1319,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -1160,23 +1160,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1184,44 +1178,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1246,33 +1240,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1281,78 +1277,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1380,7 +1377,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -971,23 +971,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -995,44 +989,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1057,33 +1051,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1092,78 +1088,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1191,7 +1188,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -989,23 +989,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1013,44 +1007,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1075,33 +1069,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1110,78 +1106,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
//#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1209,7 +1206,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -982,23 +982,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1006,44 +1000,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1068,33 +1062,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1103,78 +1099,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
//#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1202,7 +1199,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
@@ -991,23 +991,17 @@
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
// Nozzle Park -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to define a special XYZ position, inside the
|
||||
// machine's topology, to park the nozzle when idle or when receiving the G27
|
||||
// command.
|
||||
//
|
||||
// The "P" paramenter controls what is the action applied to the Z axis:
|
||||
// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
|
||||
// be raised to reach Z-park height.
|
||||
//
|
||||
// P1: No matter the current Z-pos, the nozzle will be raised/lowered to
|
||||
// reach Z-park height.
|
||||
//
|
||||
// P2: The nozzle height will be raised by Z-park amount but never going over
|
||||
// the machine's limit of Z_MAX_POS.
|
||||
//
|
||||
/**
|
||||
* Nozzle Park -- EXPERIMENTAL
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
@@ -1015,44 +1009,44 @@
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#endif
|
||||
|
||||
//
|
||||
// Clean Nozzle Feature -- EXPERIMENTAL
|
||||
//
|
||||
// When enabled allows the user to send G12 to start the nozzle cleaning
|
||||
// process, the G-Code accepts two parameters:
|
||||
// "P" for pattern selection
|
||||
// "S" for defining the number of strokes/repetitions
|
||||
//
|
||||
// Available list of patterns:
|
||||
// P0: This is the default pattern, this process requires a sponge type
|
||||
// material at a fixed bed location. S defines "strokes" i.e.
|
||||
// back-and-forth movements between the starting and end points.
|
||||
//
|
||||
// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T"
|
||||
// defines the number of zig-zag triangles to be done. "S" defines the
|
||||
// number of strokes aka one back-and-forth movement. Zig-zags will
|
||||
// be performed in whichever dimension is smallest. As an example,
|
||||
// sending "G12 P1 S1 T3" will execute:
|
||||
//
|
||||
// --
|
||||
// | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
// | | / \ / \ / \ |
|
||||
// A | | / \ / \ / \ |
|
||||
// | | / \ / \ / \ |
|
||||
// | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
// -- +--------------------------------+
|
||||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
// may change to add new functionality like different wipe patterns.
|
||||
//
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
@@ -1077,33 +1071,35 @@
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
//
|
||||
// Print job timer
|
||||
//
|
||||
// Enable this option to automatically start and stop the
|
||||
// print job timer when M104/M109/M190 commands are received.
|
||||
// M104 (extruder without wait) - high temp = none, low temp = stop timer
|
||||
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
|
||||
// M190 (bed with wait) - high temp = start timer, low temp = none
|
||||
//
|
||||
// In all cases the timer can be started and stopped using
|
||||
// the following commands:
|
||||
//
|
||||
// - M75 - Start the print job timer
|
||||
// - M76 - Pause the print job timer
|
||||
// - M77 - Stop the print job timer
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
//
|
||||
// Print Counter
|
||||
//
|
||||
// When enabled Marlin will keep track of some print statistical data such as:
|
||||
// - Total print jobs
|
||||
// - Total successful print jobs
|
||||
// - Total failed print jobs
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
@@ -1112,78 +1108,79 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||
// list of languages are available:
|
||||
// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
//
|
||||
// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
//
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
|
||||
* kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
//
|
||||
// LCD Character Set
|
||||
//
|
||||
// Note: This option is NOT applicable to Graphical Displays.
|
||||
//
|
||||
// All character-based LCD's provide ASCII plus one of these
|
||||
// language extensions:
|
||||
//
|
||||
// - JAPANESE ... the most common
|
||||
// - WESTERN ... with more accented characters
|
||||
// - CYRILLIC ... for the Russian language
|
||||
//
|
||||
// To determine the language extension installed on your controller:
|
||||
//
|
||||
// - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
// - Click the controller to view the LCD menu
|
||||
// - The LCD will display Japanese, Western, or Cyrillic text
|
||||
//
|
||||
// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
//
|
||||
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||
// (ST7565R family). (This option will be set automatically for certain displays.)
|
||||
//
|
||||
// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display!
|
||||
// https://github.com/olikraus/U8glib_Arduino
|
||||
//
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
//
|
||||
// SD CARD
|
||||
//
|
||||
// SD Card support is disabled by default. If your controller has an SD slot,
|
||||
// you must uncomment the following option or it won't work.
|
||||
//
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
//
|
||||
// SD CARD: SPI SPEED
|
||||
//
|
||||
// Uncomment ONE of the following items to use a slower SPI transfer
|
||||
// speed. This is usually required if you're getting volume init errors.
|
||||
//
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
//
|
||||
// SD CARD: ENABLE CRC
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
@@ -1211,7 +1208,7 @@
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
|
||||
Reference in New Issue
Block a user