diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index e69e4be21b..3d547196fc 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -286,7 +286,8 @@ void quickstop_stepper() { } void enable_e_steppers() { - enable_E0(); enable_E1(); enable_E2(); enable_E3(); enable_E4(); enable_E5(); + #define _ENA_E(N) enable_E##N(); + REPEAT(E_STEPPERS, _ENA_E) } void enable_all_steppers() { @@ -300,17 +301,14 @@ void enable_all_steppers() { } void disable_e_steppers() { - disable_E0(); disable_E1(); disable_E2(); disable_E3(); disable_E4(); disable_E5(); + #define _DIS_E(N) disable_E##N(); + REPEAT(E_STEPPERS, _DIS_E) } void disable_e_stepper(const uint8_t e) { + #define _CASE_DIS_E(N) case N: disable_E##N(); break; switch (e) { - case 0: disable_E0(); break; - case 1: disable_E1(); break; - case 2: disable_E2(); break; - case 3: disable_E3(); break; - case 4: disable_E4(); break; - case 5: disable_E5(); break; + REPEAT(EXTRUDERS, _CASE_DIS_E) } } @@ -547,24 +545,11 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) { #else // !SWITCHING_EXTRUDER bool oldstatus; switch (active_extruder) { - default: oldstatus = E0_ENABLE_READ(); enable_E0(); break; - #if E_STEPPERS > 1 - case 1: oldstatus = E1_ENABLE_READ(); enable_E1(); break; - #if E_STEPPERS > 2 - case 2: oldstatus = E2_ENABLE_READ(); enable_E2(); break; - #if E_STEPPERS > 3 - case 3: oldstatus = E3_ENABLE_READ(); enable_E3(); break; - #if E_STEPPERS > 4 - case 4: oldstatus = E4_ENABLE_READ(); enable_E4(); break; - #if E_STEPPERS > 5 - case 5: oldstatus = E5_ENABLE_READ(); enable_E5(); break; - #endif // E_STEPPERS > 5 - #endif // E_STEPPERS > 4 - #endif // E_STEPPERS > 3 - #endif // E_STEPPERS > 2 - #endif // E_STEPPERS > 1 + default: + #define _CASE_EN(N) case N: oldstatus = E##N_ENABLE_READ(); enable_E##N(); break; + REPEAT(E_STEPPERS, _CASE_EN); } - #endif // !SWITCHING_EXTRUDER + #endif const float olde = current_position.e; current_position.e += EXTRUDER_RUNOUT_EXTRUDE; @@ -585,22 +570,8 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) { } #else // !SWITCHING_EXTRUDER switch (active_extruder) { - case 0: E0_ENABLE_WRITE(oldstatus); break; - #if E_STEPPERS > 1 - case 1: E1_ENABLE_WRITE(oldstatus); break; - #if E_STEPPERS > 2 - case 2: E2_ENABLE_WRITE(oldstatus); break; - #if E_STEPPERS > 3 - case 3: E3_ENABLE_WRITE(oldstatus); break; - #if E_STEPPERS > 4 - case 4: E4_ENABLE_WRITE(oldstatus); break; - #if E_STEPPERS > 5 - case 5: E5_ENABLE_WRITE(oldstatus); break; - #endif // E_STEPPERS > 5 - #endif // E_STEPPERS > 4 - #endif // E_STEPPERS > 3 - #endif // E_STEPPERS > 2 - #endif // E_STEPPERS > 1 + #define _CASE_RESTORE(N) case N: E##N##_ENABLE_WRITE(oldstatus); break; + REPEAT(E_STEPPERS, _CASE_RESTORE); } #endif // !SWITCHING_EXTRUDER diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h index 03deea89dc..0c31ad792b 100644 --- a/Marlin/src/core/macros.h +++ b/Marlin/src/core/macros.h @@ -165,6 +165,7 @@ // Macros to support option testing #define _CAT(a,V...) a##V +#define CAT(a,V...) _CAT(a,V) #define SWITCH_ENABLED_false 0 #define SWITCH_ENABLED_true 1 #define SWITCH_ENABLED_0 0 @@ -229,32 +230,6 @@ #define _JOIN_1(O) (O) #define JOIN_N(N,C,V...) (DO(JOIN,C,LIST_N(N,V))) -// Macros for adding -#define INC_0 1 -#define INC_1 2 -#define INC_2 3 -#define INC_3 4 -#define INC_4 5 -#define INC_5 6 -#define INC_6 7 -#define INC_7 8 -#define INC_8 9 -#define INCREMENT_(n) INC_##n -#define INCREMENT(n) INCREMENT_(n) - -// Macros for subtracting -#define DEC_1 0 -#define DEC_2 1 -#define DEC_3 2 -#define DEC_4 3 -#define DEC_5 4 -#define DEC_6 5 -#define DEC_7 6 -#define DEC_8 7 -#define DEC_9 8 -#define DECREMENT_(n) DEC_##n -#define DECREMENT(n) DECREMENT_(n) - #define NOOP (void(0)) #define CEILING(x,y) (((x) + (y) - 1) / (y)) @@ -346,3 +321,127 @@ #define _MAX(V...) _MAX_N(NUM_ARGS(V), V) #endif + +// Macros for adding +#define INC_0 1 +#define INC_1 2 +#define INC_2 3 +#define INC_3 4 +#define INC_4 5 +#define INC_5 6 +#define INC_6 7 +#define INC_7 8 +#define INC_8 9 +#define INCREMENT_(n) INC_##n +#define INCREMENT(n) INCREMENT_(n) + +#define ADD0(N) N +#define ADD1(N) INCREMENT_(N) +#define ADD2(N) ADD1(ADD1(N)) +#define ADD3(N) ADD1(ADD2(N)) +#define ADD4(N) ADD2(ADD2(N)) +#define ADD5(N) ADD2(ADD3(N)) +#define ADD6(N) ADD3(ADD3(N)) +#define ADD7(N) ADD3(ADD4(N)) +#define ADD8(N) ADD4(ADD4(N)) +#define ADD9(N) ADD4(ADD5(N)) +#define ADD10(N) ADD5(ADD5(N)) + +// Macros for subtracting +#define DEC_0 0 +#define DEC_1 0 +#define DEC_2 1 +#define DEC_3 2 +#define DEC_4 3 +#define DEC_5 4 +#define DEC_6 5 +#define DEC_7 6 +#define DEC_8 7 +#define DEC_9 8 +#define DECREMENT_(n) DEC_##n +#define DECREMENT(n) DECREMENT_(n) + +#define SUB0(N) N +#define SUB1(N) DECREMENT_(N) +#define SUB2(N) SUB1(SUB1(N)) +#define SUB3(N) SUB1(SUB2(N)) +#define SUB4(N) SUB2(SUB2(N)) +#define SUB5(N) SUB2(SUB3(N)) +#define SUB6(N) SUB3(SUB3(N)) +#define SUB7(N) SUB3(SUB4(N)) +#define SUB8(N) SUB4(SUB4(N)) +#define SUB9(N) SUB4(SUB5(N)) +#define SUB10(N) SUB5(SUB5(N)) + +// +// Primitives supporting precompiler REPEAT +// +#define FIRST(a,...) a +#define SECOND(a,b,...) b + +// Defer expansion +#define EMPTY() +#define DEFER(M) M EMPTY() +#define DEFER2(M) M EMPTY EMPTY()() +#define DEFER3(M) M EMPTY EMPTY EMPTY()()() +#define DEFER4(M) M EMPTY EMPTY EMPTY EMPTY()()()() + +// Force define expansion +#define EVAL(V...) EVAL16(V) +#define EVAL1024(V...) EVAL512(EVAL512(V)) +#define EVAL512(V...) EVAL256(EVAL256(V)) +#define EVAL256(V...) EVAL128(EVAL128(V)) +#define EVAL128(V...) EVAL64(EVAL64(V)) +#define EVAL64(V...) EVAL32(EVAL32(V)) +#define EVAL32(V...) EVAL16(EVAL16(V)) +#define EVAL16(V...) EVAL8(EVAL8(V)) +#define EVAL8(V...) EVAL4(EVAL4(V)) +#define EVAL4(V...) EVAL2(EVAL2(V)) +#define EVAL2(V...) EVAL1(EVAL1(V)) +#define EVAL1(V...) V + +#define IS_PROBE(V...) SECOND(V, 0) // Get the second item passed, or 0 +#define PROBE() ~, 1 // Second item will be 1 if this is passed +#define _NOT_0 PROBE() +#define NOT(x) IS_PROBE(_CAT(_NOT_, x)) // NOT('0') gets '1'. Anything else gets '0'. +#define _BOOL(x) NOT(NOT(x)) // NOT('0') gets '0'. Anything else gets '1'. + +#define IF_ELSE(TF) _IF_ELSE(_BOOL(TF)) +#define _IF_ELSE(TF) _CAT(_IF_, TF) + +#define _IF_1(V...) V _IF_1_ELSE +#define _IF_0(...) _IF_0_ELSE + +#define _IF_1_ELSE(...) +#define _IF_0_ELSE(V...) V + +#define HAS_ARGS(V...) _BOOL(FIRST(_END_OF_ARGUMENTS_ V)()) +#define _END_OF_ARGUMENTS_() 0 + +// +// REPEAT core macros. Recurse N times with ascending I. +// + +// Call OP(I) N times with ascending counter. +#define _REPEAT(_RPT_I,_RPT_N,_RPT_OP) \ + _RPT_OP(_RPT_I) \ + IF_ELSE(SUB1(_RPT_N)) \ + ( DEFER2(__REPEAT)()(ADD1(_RPT_I),SUB1(_RPT_N),_RPT_OP) ) \ + ( /* Do nothing */ ) +#define __REPEAT() _REPEAT + +// Call OP(I, ...) N times with ascending counter. +#define _REPEAT2(_RPT_I,_RPT_N,_RPT_OP,V...) \ + _RPT_OP(_RPT_I,V) \ + IF_ELSE(SUB1(_RPT_N)) \ + ( DEFER2(__REPEAT2)()(ADD1(_RPT_I),SUB1(_RPT_N),_RPT_OP,V) ) \ + ( /* Do nothing */ ) +#define __REPEAT2() _REPEAT2 + +// Repeat a macro passing S...N-1. +#define REPEAT_S(S,N,OP) EVAL(_REPEAT(S,SUB##S(N),OP)) +#define REPEAT(N,OP) REPEAT_S(0,N,OP) + +// Repeat a macro passing 0...N-1 plus additional arguments. +#define REPEAT2_S(S,N,OP,V...) EVAL(_REPEAT2(S,SUB##S(N),OP,V)) +#define REPEAT2(N,OP,V...) REPEAT2_S(0,N,OP,V) diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index 1a458a2a55..7e4312bab1 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -56,23 +56,9 @@ void controllerfan_update() { || Z3_ENABLE_READ() == Z_ENABLE_ON #endif #if E_STEPPERS - || E0_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 1 - || E1_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 2 - || E2_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 3 - || E3_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 4 - || E4_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 5 - || E5_ENABLE_READ() == E_ENABLE_ON - #endif // E_STEPPERS > 5 - #endif // E_STEPPERS > 4 - #endif // E_STEPPERS > 3 - #endif // E_STEPPERS > 2 - #endif // E_STEPPERS > 1 - #endif // E_STEPPERS + #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == E_ENABLE_ON + REPEAT(E_STEPPERS, _OR_ENABLED_E) + #endif ) { lastMotorOn = ms; //... set time to NOW so the fan will turn on } diff --git a/Marlin/src/feature/power.cpp b/Marlin/src/feature/power.cpp index 777c7a052e..760135a71f 100644 --- a/Marlin/src/feature/power.cpp +++ b/Marlin/src/feature/power.cpp @@ -59,33 +59,19 @@ bool Power::is_power_needed() { #if HAS_HEATED_BED || thermalManager.temp_bed.soft_pwm_amount > 0 #endif - #if HAS_X2_ENABLE - || X2_ENABLE_READ() == X_ENABLE_ON - #endif - #if HAS_Y2_ENABLE - || Y2_ENABLE_READ() == Y_ENABLE_ON - #endif - #if HAS_Z2_ENABLE - || Z2_ENABLE_READ() == Z_ENABLE_ON - #endif - #if E_STEPPERS - || E0_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 1 - || E1_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 2 - || E2_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 3 - || E3_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 4 - || E4_ENABLE_READ() == E_ENABLE_ON - #if E_STEPPERS > 5 - || E5_ENABLE_READ() == E_ENABLE_ON - #endif // E_STEPPERS > 5 - #endif // E_STEPPERS > 4 - #endif // E_STEPPERS > 3 - #endif // E_STEPPERS > 2 - #endif // E_STEPPERS > 1 - #endif // E_STEPPERS + #if HAS_X2_ENABLE + || X2_ENABLE_READ() == X_ENABLE_ON + #endif + #if HAS_Y2_ENABLE + || Y2_ENABLE_READ() == Y_ENABLE_ON + #endif + #if HAS_Z2_ENABLE + || Z2_ENABLE_READ() == Z_ENABLE_ON + #endif + #if E_STEPPERS + #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == E_ENABLE_ON + REPEAT(E_STEPPERS, _OR_ENABLED_E) + #endif ) return true; HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0) return true; diff --git a/Marlin/src/gcode/feature/mixing/M163-M165.cpp b/Marlin/src/gcode/feature/mixing/M163-M165.cpp index 05654d389a..cc0a468366 100644 --- a/Marlin/src/gcode/feature/mixing/M163-M165.cpp +++ b/Marlin/src/gcode/feature/mixing/M163-M165.cpp @@ -79,20 +79,7 @@ void GcodeSuite::M164() { // Get mixing parameters from the GCode // The total "must" be 1.0 (but it will be normalized) // If no mix factors are given, the old mix is preserved - const char mixing_codes[] = { 'A', 'B' - #if MIXING_STEPPERS > 2 - , 'C' - #if MIXING_STEPPERS > 3 - , 'D' - #if MIXING_STEPPERS > 4 - , 'H' - #if MIXING_STEPPERS > 5 - , 'I' - #endif // MIXING_STEPPERS > 5 - #endif // MIXING_STEPPERS > 4 - #endif // MIXING_STEPPERS > 3 - #endif // MIXING_STEPPERS > 2 - }; + const char mixing_codes[] = { LIST_N(MIXING_STEPPERS, 'A', 'B', 'C', 'D', 'H', 'I') }; uint8_t mix_bits = 0; MIXER_STEPPER_LOOP(i) { if (parser.seenval(mixing_codes[i])) { diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index df13f55fc5..cfe67e785a 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -1017,7 +1017,7 @@ #define HAS_TEMP_ADC_BED HAS_ADC_TEST(BED) #define HAS_TEMP_ADC_CHAMBER HAS_ADC_TEST(CHAMBER) -#define HAS_TEMP_HOTEND (HAS_TEMP_ADC_0 || ENABLED(HEATER_0_USES_MAX6675)) +#define HAS_TEMP_HOTEND (HOTENDS > 0 && (HAS_TEMP_ADC_0 || ENABLED(HEATER_0_USES_MAX6675))) #define HAS_TEMP_BED HAS_TEMP_ADC_BED #define HAS_TEMP_CHAMBER HAS_TEMP_ADC_CHAMBER #define HAS_HEATED_CHAMBER (HAS_TEMP_CHAMBER && PIN_EXISTS(HEATER_CHAMBER)) diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp index 5cb03a2f0e..b6ee4ba424 100644 --- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp @@ -85,22 +85,8 @@ bool TemperatureScreen::onTouchHeld(uint8_t tag) { case 11: UI_INCREMENT(TargetFan_percent, FAN0); break; #endif case 30: - setTargetTemp_celsius(0,E0); - #if HOTENDS > 1 - setTargetTemp_celsius(0,E1); - #if HOTENDS > 2 - setTargetTemp_celsius(0,E2); - #if HOTENDS > 3 - setTargetTemp_celsius(0,E3); - #if HOTENDS > 4 - setTargetTemp_celsius(0,E4); - #if HOTENDS > 5 - setTargetTemp_celsius(0,E5); - #endif - #endif - #endif - #endif - #endif + #define _HOTEND_OFF(N) setTargetTemp_celsius(0,E##N); + REPEAT(HOTENDS, _HOTEND_OFF); #if HAS_HEATED_BED setTargetTemp_celsius(0,BED); #endif diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 892f9c61d3..5199f90ea0 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -277,8 +277,10 @@ void menu_advanced_settings(); #if DISABLED(SLIM_LCD_MENUS) void _menu_configuration_preheat_settings(const uint8_t material) { - #define MINTEMP_ALL _MIN(LIST_N(HOTENDS, HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP, HEATER_5_MINTEMP), 999) - #define MAXTEMP_ALL _MAX(LIST_N(HOTENDS, HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP), 0) + #define _MINTEMP_ITEM(N) HEATER_##N##_MINTEMP, + #define _MAXTEMP_ITEM(N) HEATER_##N##_MAXTEMP, + #define MINTEMP_ALL _MIN(REPEAT(HOTENDS, _MINTEMP_ITEM) 999) + #define MAXTEMP_ALL _MAX(REPEAT(HOTENDS, _MAXTEMP_ITEM) 0) START_MENU(); BACK_ITEM(MSG_CONFIGURATION); EDIT_ITEM(percent, MSG_FAN_SPEED, &ui.preheat_fan_speed[material], 0, 255); diff --git a/Marlin/src/lcd/menu/menu_mixer.cpp b/Marlin/src/lcd/menu/menu_mixer.cpp index 13cb31a5c5..c147705e7c 100644 --- a/Marlin/src/lcd/menu/menu_mixer.cpp +++ b/Marlin/src/lcd/menu/menu_mixer.cpp @@ -158,10 +158,11 @@ void lcd_mixer_mix_edit() { #if CHANNEL_MIX_EDITING - #define EDIT_COLOR(N) EDIT_ITEM_FAST(float52, MSG_MIX_COMPONENT_##N, &mixer.collector[N-1], 0, 10); - START_MENU(); BACK_ITEM(MSG_MIXER); + + #define EDIT_COLOR(N) EDIT_ITEM_FAST(float52, MSG_MIX_COMPONENT_##N, &mixer.collector[N-1], 0, 10); + EDIT_COLOR(1); EDIT_COLOR(2); #if MIXING_STEPPERS > 2 @@ -176,6 +177,7 @@ void lcd_mixer_mix_edit() { #endif #endif #endif + ACTION_ITEM(MSG_CYCLE_MIX, _lcd_mixer_cycle_mix); ACTION_ITEM(MSG_COMMIT_VTOOL, _lcd_mixer_commit_vtool); END_MENU(); diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 14319826ef..99b944ae12 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1924,121 +1924,32 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #if ENABLED(DISABLE_INACTIVE_EXTRUDER) // Enable only the selected extruder - #define DISABLE_IDLE_E(N) if (!g_uc_extruder_last_move[N]) disable_E##N(); - for (uint8_t i = 0; i < EXTRUDERS; i++) if (g_uc_extruder_last_move[i] > 0) g_uc_extruder_last_move[i]--; - switch (extruder) { - case 0: - #if EXTRUDERS > 1 - DISABLE_IDLE_E(1); - #if EXTRUDERS > 2 - DISABLE_IDLE_E(2); - #if EXTRUDERS > 3 - DISABLE_IDLE_E(3); - #if EXTRUDERS > 4 - DISABLE_IDLE_E(4); - #if EXTRUDERS > 5 - DISABLE_IDLE_E(5); - #endif // EXTRUDERS > 5 - #endif // EXTRUDERS > 4 - #endif // EXTRUDERS > 3 - #endif // EXTRUDERS > 2 - #endif // EXTRUDERS > 1 - enable_E0(); - g_uc_extruder_last_move[0] = (BLOCK_BUFFER_SIZE) * 2; - #if HAS_DUPLICATION_MODE - if (extruder_duplication_enabled) { - enable_E1(); - g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2; - } - #endif - break; - #if EXTRUDERS > 1 - case 1: - DISABLE_IDLE_E(0); - #if EXTRUDERS > 2 - DISABLE_IDLE_E(2); - #if EXTRUDERS > 3 - DISABLE_IDLE_E(3); - #if EXTRUDERS > 4 - DISABLE_IDLE_E(4); - #if EXTRUDERS > 5 - DISABLE_IDLE_E(5); - #endif // EXTRUDERS > 5 - #endif // EXTRUDERS > 4 - #endif // EXTRUDERS > 3 - #endif // EXTRUDERS > 2 - enable_E1(); - g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2; - break; - #if EXTRUDERS > 2 - case 2: - DISABLE_IDLE_E(0); - DISABLE_IDLE_E(1); - #if EXTRUDERS > 3 - DISABLE_IDLE_E(3); - #if EXTRUDERS > 4 - DISABLE_IDLE_E(4); - #if EXTRUDERS > 5 - DISABLE_IDLE_E(5); - #endif - #endif - #endif - enable_E2(); - g_uc_extruder_last_move[2] = (BLOCK_BUFFER_SIZE) * 2; - break; - #if EXTRUDERS > 3 - case 3: - DISABLE_IDLE_E(0); - DISABLE_IDLE_E(1); - DISABLE_IDLE_E(2); - #if EXTRUDERS > 4 - DISABLE_IDLE_E(4); - #if EXTRUDERS > 5 - DISABLE_IDLE_E(5); - #endif - #endif - enable_E3(); - g_uc_extruder_last_move[3] = (BLOCK_BUFFER_SIZE) * 2; - break; - #if EXTRUDERS > 4 - case 4: - DISABLE_IDLE_E(0); - DISABLE_IDLE_E(1); - DISABLE_IDLE_E(2); - DISABLE_IDLE_E(3); - #if EXTRUDERS > 5 - DISABLE_IDLE_E(5); - #endif - enable_E4(); - g_uc_extruder_last_move[4] = (BLOCK_BUFFER_SIZE) * 2; - break; - #if EXTRUDERS > 5 - case 5: - DISABLE_IDLE_E(0); - DISABLE_IDLE_E(1); - DISABLE_IDLE_E(2); - DISABLE_IDLE_E(3); - DISABLE_IDLE_E(4); - enable_E5(); - g_uc_extruder_last_move[5] = (BLOCK_BUFFER_SIZE) * 2; - break; - #endif // EXTRUDERS > 5 - #endif // EXTRUDERS > 4 - #endif // EXTRUDERS > 3 - #endif // EXTRUDERS > 2 - #endif // EXTRUDERS > 1 - } + #if HAS_DUPLICATION_MODE + if (extruder_duplication_enabled && extruder == 0) { + enable_E1(); + g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2; + } + #endif + + #define ENABLE_ONE_E(N) do{ \ + if (extruder == N) { \ + enable_E##N(); \ + g_uc_extruder_last_move[N] = (BLOCK_BUFFER_SIZE) * 2; \ + } \ + else if (!g_uc_extruder_last_move[N]) \ + disable_E##N(); \ + }while(0); + #else - enable_E0(); - enable_E1(); - enable_E2(); - enable_E3(); - enable_E4(); - enable_E5(); + + #define ENABLE_ONE_E(N) enable_E##N(); + #endif + + REPEAT(EXTRUDERS, ENABLE_ONE_E); } #endif // EXTRUDERS diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 447dc96a63..9f0f05263b 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -628,31 +628,31 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { #define CHAMBER_FAN_INDEX HOTENDS void Temperature::checkExtruderAutoFans() { - #define _EFAN(A,B) _EFANOVERLAP(A,B) ? B : + #define _EFAN(B,A) _EFANOVERLAP(A,B) ? B : static const uint8_t fanBit[] PROGMEM = { 0 #if HOTENDS > 1 - , _EFAN(1,0) 1 - #endif - #if HOTENDS > 2 - , _EFAN(2,0) _EFAN(2,1) 2 - #endif - #if HOTENDS > 3 - , _EFAN(3,0) _EFAN(3,1) _EFAN(3,2) 3 - #endif - #if HOTENDS > 4 - , _EFAN(4,0) _EFAN(4,1) _EFAN(4,2) _EFAN(4,3) 4 - #endif - #if HOTENDS > 5 - , _EFAN(5,0) _EFAN(5,1) _EFAN(5,2) _EFAN(5,3) _EFAN(5,4) 5 + , REPEAT2(1,_EFAN,1) 1 + #if HOTENDS > 2 + , REPEAT2(2,_EFAN,2) 2 + #if HOTENDS > 3 + , REPEAT2(3,_EFAN,3) 3 + #if HOTENDS > 4 + , REPEAT2(4,_EFAN,4) 4 + #if HOTENDS > 5 + , REPEAT2(5,_EFAN,5) 5 + #endif + #endif + #endif + #endif #endif #if HAS_AUTO_CHAMBER_FAN #define _CFAN(B) _FANOVERLAP(CHAMBER,B) ? B : - , _CFAN(0) _CFAN(1) _CFAN(2) _CFAN(3) _CFAN(4) _CFAN(5) 6 + , REPEAT(HOTENDS,_CFAN) (HOTENDS) #endif }; - uint8_t fanState = 0; + uint8_t fanState = 0; HOTEND_LOOP() if (temp_hotend[e].celsius >= EXTRUDER_AUTO_FAN_TEMPERATURE) SBI(fanState, pgm_read_byte(&fanBit[e])); @@ -1953,22 +1953,7 @@ void Temperature::disable_all_heaters() { } #if HAS_TEMP_HOTEND - DISABLE_HEATER(0); - #if HOTENDS > 1 - DISABLE_HEATER(1); - #if HOTENDS > 2 - DISABLE_HEATER(2); - #if HOTENDS > 3 - DISABLE_HEATER(3); - #if HOTENDS > 4 - DISABLE_HEATER(4); - #if HOTENDS > 5 - DISABLE_HEATER(5); - #endif // HOTENDS > 5 - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 - #endif // HOTENDS > 2 - #endif // HOTENDS > 1 + REPEAT(HOTENDS, DISABLE_HEATER); #endif #if HAS_HEATED_BED @@ -2223,22 +2208,14 @@ void Temperature::readings_ready() { TEMPDIR(0) #endif #if HOTENDS > 1 + #define _TEMPDIR(N) , TEMPDIR(N) #if ENABLED(HEATER_1_USES_MAX6675) , 0 #else - , TEMPDIR(1) + _TEMPDIR(1) #endif #if HOTENDS > 2 - , TEMPDIR(2) - #if HOTENDS > 3 - , TEMPDIR(3) - #if HOTENDS > 4 - , TEMPDIR(4) - #if HOTENDS > 5 - , TEMPDIR(5) - #endif // HOTENDS > 5 - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 + REPEAT_S(2, HOTENDS, _TEMPDIR) #endif // HOTENDS > 2 #endif // HOTENDS > 1 }; @@ -2391,24 +2368,9 @@ void Temperature::isr() { pwm_count_tmp -= 127; #if HOTENDS - #define _PWM_MOD_E(N) _PWM_MOD(N,soft_pwm_hotend[N],temp_hotend[N]) - _PWM_MOD_E(0); - #if HOTENDS > 1 - _PWM_MOD_E(1); - #if HOTENDS > 2 - _PWM_MOD_E(2); - #if HOTENDS > 3 - _PWM_MOD_E(3); - #if HOTENDS > 4 - _PWM_MOD_E(4); - #if HOTENDS > 5 - _PWM_MOD_E(5); - #endif // HOTENDS > 5 - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 - #endif // HOTENDS > 2 - #endif // HOTENDS > 1 - #endif // HOTENDS + #define _PWM_MOD_E(N) _PWM_MOD(N,soft_pwm_hotend[N],temp_hotend[N]); + REPEAT(HOTENDS, _PWM_MOD_E); + #endif #if HAS_HEATED_BED _PWM_MOD(BED,soft_pwm_bed,temp_bed); @@ -2438,24 +2400,9 @@ void Temperature::isr() { else { #define _PWM_LOW(N,S) do{ if (S.count <= pwm_count_tmp) WRITE_HEATER_##N(LOW); }while(0) #if HOTENDS - #define _PWM_LOW_E(N) _PWM_LOW(N, soft_pwm_hotend[N]) - _PWM_LOW_E(0); - #if HOTENDS > 1 - _PWM_LOW_E(1); - #if HOTENDS > 2 - _PWM_LOW_E(2); - #if HOTENDS > 3 - _PWM_LOW_E(3); - #if HOTENDS > 4 - _PWM_LOW_E(4); - #if HOTENDS > 5 - _PWM_LOW_E(5); - #endif // HOTENDS > 5 - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 - #endif // HOTENDS > 2 - #endif // HOTENDS > 1 - #endif // HOTENDS + #define _PWM_LOW_E(N) _PWM_LOW(N, soft_pwm_hotend[N]); + REPEAT(HOTENDS, _PWM_LOW_E); + #endif #if HAS_HEATED_BED _PWM_LOW(BED, soft_pwm_bed); @@ -2504,24 +2451,9 @@ void Temperature::isr() { if (slow_pwm_count == 0) { #if HOTENDS - #define _SLOW_PWM_E(N) _SLOW_PWM(N, soft_pwm_hotend[N], temp_hotend[N]) - _SLOW_PWM_E(0); - #if HOTENDS > 1 - _SLOW_PWM_E(1); - #if HOTENDS > 2 - _SLOW_PWM_E(2); - #if HOTENDS > 3 - _SLOW_PWM_E(3); - #if HOTENDS > 4 - _SLOW_PWM_E(4); - #if HOTENDS > 5 - _SLOW_PWM_E(5); - #endif // HOTENDS > 5 - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 - #endif // HOTENDS > 2 - #endif // HOTENDS > 1 - #endif // HOTENDS + #define _SLOW_PWM_E(N) _SLOW_PWM(N, soft_pwm_hotend[N], temp_hotend[N]); + REPEAT(HOTENDS, _SLOW_PWM_E); + #endif #if HAS_HEATED_BED _SLOW_PWM(BED, soft_pwm_bed, temp_bed); @@ -2531,23 +2463,8 @@ void Temperature::isr() { #if HOTENDS #define _PWM_OFF_E(N) _PWM_OFF(N, soft_pwm_hotend[N]); - _PWM_OFF_E(0); - #if HOTENDS > 1 - _PWM_OFF_E(1); - #if HOTENDS > 2 - _PWM_OFF_E(2); - #if HOTENDS > 3 - _PWM_OFF_E(3); - #if HOTENDS > 4 - _PWM_OFF_E(4); - #if HOTENDS > 5 - _PWM_OFF_E(5); - #endif // HOTENDS > 5 - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 - #endif // HOTENDS > 2 - #endif // HOTENDS > 1 - #endif // HOTENDS + REPEAT(HOTENDS, _PWM_OFF_E); + #endif #if HAS_HEATED_BED _PWM_OFF(BED, soft_pwm_bed); @@ -2598,23 +2515,8 @@ void Temperature::isr() { slow_pwm_count &= 0x7F; #if HOTENDS - soft_pwm_hotend[0].dec(); - #if HOTENDS > 1 - soft_pwm_hotend[1].dec(); - #if HOTENDS > 2 - soft_pwm_hotend[2].dec(); - #if HOTENDS > 3 - soft_pwm_hotend[3].dec(); - #if HOTENDS > 4 - soft_pwm_hotend[4].dec(); - #if HOTENDS > 5 - soft_pwm_hotend[5].dec(); - #endif // HOTENDS > 5 - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 - #endif // HOTENDS > 2 - #endif // HOTENDS > 1 - #endif // HOTENDS + HOTEND_LOOP() soft_pwm_hotend[e].dec(); + #endif #if HAS_HEATED_BED soft_pwm_bed.dec(); #endif