bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

NO_TIMEOUTS and ADVANCED_OK off by default

Browse Source
This commit is contained in:
Scott Lahteine
2015-05-16 02:47:20 -07:00
parent 7fecc48174
commit 76438195f0
12 changed files with 60 additions and 48 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View File

@@ -402,12 +402,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@@ -402,12 +402,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract

9
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK
// @section fwretract