bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

library - U8glib upgrade to v1.17

Browse Source
This commit is contained in:
Richard Wackerbarth 2015-06-19 08:38:46 -04:00
parent deea00dde3
commit 7592bb1f2f
122 changed files with 19897 additions and 6459 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/ChangeLog
View File

@ -107,6 +107,54 @@ u8glib ChangeLog
* Sleep Mode
* 4x mode for ST7920
* New C++ interface for ST7920
2013-03-24 v1.12 Oliver Kraus <olikraus@gmail.com>
* Added touch panel examples
2013-06-30 v1.13 Oliver Kraus <olikraus@gmail.com>
* Fixed missing "Arduino.h" in u8g_delay.c
* Disable interrupt for port/pin access (AVR), issue 19
* Support for HT1632: U8GLIB_HT1632_24X16 u8g(wr, data, cs), issue 165
* Support for SSD1351 OLED, issue 168
* Cleaned up several compiler warnings
* Fixed conflict with scheduler (Arduino Due), issue 155
* HW SPI for Arduino Due, issue 180
* Performance improvement for ST7920, issue 177
* Added ":" to the "n"umeric variant of the fonts, issue 166
* Added additional argument u8g_InitCom(). Use U8G_SPI_CLK_CYCLE_NONE by default.
* Added double buffer option for many ST7565 devices
* Tested with Arduino 1.0.5
2013-10-03 v1.14 Oliver Kraus <olikraus@gmail.com>
* Support for ARM controller
* Support for the A2 micro printer (issue 191)
* Ellipse drawing primitive (issue 187)
* Added software reset for UC1701
* Fixed compiler warning (issue 196)
* Support for Freetronics SSD1351 OLED (issue 195)
* Several other fixes and improvements
2014-01-25 v1.15 Oliver Kraus <olikraus@gmail.com>
* Fixed a bug with the rotation procs: Occupied too much flash ROM (issue 219)
* Fixed issue with more than one SPI controller (SW SPI, issue 227)
* Added "drawTriangle" (issue 226)
* Added support for UC1608 (issue 214)
* Added ProFont family of fonts (issue 234)
* SW SPI support for Teensy 3 (issue 230)
* Removed Arduino/AVR specific files from ARM port (issue 209)
2014-07-05 v1.16 Oliver Kraus <olikraus@gmail.com>
* Added support for LD7032 60x32 OLED
* Added support for SSD1306 OLED, which does not send I2C ACK (issue 239)
* Added support for SH1106 128x64 OLED
* Added support for T6963 128x128 displays
* Added U8GLIB_SSD1306_ADAFRUIT_128X64 constructor
2014-12-21 v1.17 Oliver Kraus <olikraus@gmail.com>
* Added U8GLIB_UC1611_DOGM240 constructor (Issue 284)
* Added U8GLIB_UC1611_DOGXL240 constructor
* Added support for UC1608 controller (Issue 300)
* Added U8GLIB_SSD1306_ADAFRUIT_128X64 for Adafruit OLEDs (Issue 289)
* Bufix in the sleep on/off sequence (CS has not been releases, issue 298)
* helvB and helvR number only fonts (Issue 271)
* 400KHz option for I2C with U8G_I2C_OPT_FAST available for Due and Uno (Issue 303)
* I2C support for Arduino Due. 100KHz/400KHz, TWI & TWI1, ACK will be ignored (issue 285)
* Unifont update (Issue 297)

9
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/INSTALL.TXT
View File

@ -2,10 +2,15 @@
U8GLIB
http://code.google.com/p/u8glib/
Install instructions for the Arduino environment.
1. Unzip u8glib_arduino_vX.XX.zip into the "libraries" folder
1. Start Arduino IDE
2. In the Arduino IDE, import the library from the "Add Library" Menu.
Alternative install instructions for the Arduino environment.
1. Unzip u8glib_arduino_vX.XX.zip into the "libraries" folder of the
Arduino install directory
2. Start Arduino IDE
Install instructions for the Chipkit (Arduino) environment.

1
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/U8glib.cpp
View File

@ -77,4 +77,3 @@ uint8_t U8GLIB::initRW8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, u
return u8g_InitRW8Bit(&u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset);
}

462
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/U8glib.h
View File

@ -57,10 +57,8 @@ class U8GLIB : public Print
protected:
uint8_t init8BitFixedPort(u8g_dev_t *dev, uint8_t en, uint8_t cs, uint8_t di, uint8_t rw, uint8_t reset);
private:
uint8_t init8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE);
uint8_t initRW8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset);
uint8_t init8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE);
uint8_t initRW8Bit(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset);
public:
/* constructor */
@ -68,17 +66,17 @@ class U8GLIB : public Print
{ }
U8GLIB(u8g_dev_t *dev)
{ prepare(); u8g_Init(&u8g, dev); }
U8GLIB(u8g_dev_t *dev, u8g_com_fnptr com_fn)
{ prepare(); u8g_InitComFn(&u8g, dev, com_fn); }
U8GLIB(u8g_dev_t *dev, uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset)
{ initSPI(dev, sck, mosi, cs, a0, reset); }
U8GLIB(u8g_dev_t *dev, uint8_t cs, uint8_t a0, uint8_t reset)
{ initHWSPI(dev, cs, a0, reset); }
U8GLIB(u8g_dev_t *dev, uint8_t options)
{ initI2C(dev, options); }
U8GLIB(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw, uint8_t reset)
U8GLIB(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t en, uint8_t cs1, uint8_t cs2, uint8_t di, uint8_t rw, uint8_t reset)
{ init8Bit(dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset); }
U8GLIB(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset)
U8GLIB(u8g_dev_t *dev, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset)
{ initRW8Bit(dev, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset); }
uint8_t begin(void) { is_begin = 1; return u8g_Begin(&u8g); }
@ -114,6 +112,11 @@ class U8GLIB : public Print
void sleepOff(void) { u8g_SleepOff(&u8g); }
/* graphic primitives */
void setColorEntry(uint8_t color_index, uint8_t r, uint8_t g, uint8_t b) { u8g_SetColorEntry(&u8g, color_index, r, g, b); }
void setHiColor(uint16_t rgb) { u8g_SetHiColor(&u8g, rgb); }
void setHiColorByRGB(uint8_t r, uint8_t g, uint8_t b) { u8g_SetHiColorByRGB(&u8g, r, g, b); }
void setRGB(uint8_t r, uint8_t g, uint8_t b) { u8g_SetRGB(&u8g, r, g, b); }
void setColorIndex(uint8_t color_index) { u8g_SetColorIndex(&u8g, color_index); }
uint8_t getColorIndex(void) { return u8g_GetColorIndex(&u8g); }
@ -138,6 +141,14 @@ class U8GLIB : public Print
void drawCircle(u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t opt = U8G_DRAW_ALL) { u8g_DrawCircle(&u8g, x0, y0, rad, opt); }
void drawDisc(u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rad, uint8_t opt = U8G_DRAW_ALL) { u8g_DrawDisc(&u8g, x0, y0, rad, opt); }
void drawEllipse(u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rx, u8g_uint_t ry, uint8_t opt = U8G_DRAW_ALL) { u8g_DrawEllipse(&u8g, x0, y0, rx, ry, opt); }
void drawFilledEllipse(u8g_uint_t x0, u8g_uint_t y0, u8g_uint_t rx, u8g_uint_t ry, uint8_t opt = U8G_DRAW_ALL) { u8g_DrawFilledEllipse(&u8g, x0, y0, rx, ry, opt); }
void drawTriangle(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
{ u8g_DrawTriangle(&u8g, x0, y0, x1, y1, x2, y2); }
/* bitmap handling */
void drawBitmap(u8g_uint_t x, u8g_uint_t y, u8g_uint_t cnt, u8g_uint_t h, const uint8_t *bitmap)
{ u8g_DrawBitmap(&u8g, x, y, cnt, h, bitmap); }
@ -223,6 +234,17 @@ class U8GLIB_DOGS102 : public U8GLIB
{ }
};
class U8GLIB_DOGS102_2X : public U8GLIB
{
public:
U8GLIB_DOGS102_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1701_dogs102_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_DOGS102_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1701_dogs102_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_MINI12864 : public U8GLIB
{
public:
@ -234,6 +256,17 @@ class U8GLIB_MINI12864 : public U8GLIB
{ }
};
class U8GLIB_MINI12864_2X : public U8GLIB
{
public:
U8GLIB_MINI12864_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1701_mini12864_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_MINI12864_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1701_mini12864_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_DOGM132 : public U8GLIB
{
public:
@ -260,6 +293,14 @@ class U8GLIB_NHD_C12832 : public U8GLIB
{ }
};
class U8GLIB_NHD_C12832_USART : public U8GLIB
{
public:
U8GLIB_NHD_C12832_USART(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_nhd_c12832_hw_usart_spi, cs, a0, reset)
{ }
};
class U8GLIB_DOGM128 : public U8GLIB
{
public:
@ -269,6 +310,25 @@ class U8GLIB_DOGM128 : public U8GLIB
U8GLIB_DOGM128(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_dogm128_hw_spi, cs, a0, reset)
{ }
U8GLIB_DOGM128(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_dogm128_parallel, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
{ }
};
class U8GLIB_DOGM128_2X : public U8GLIB
{
public:
U8GLIB_DOGM128_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_dogm128_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_DOGM128_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_dogm128_2x_hw_spi, cs, a0, reset)
{ }
U8GLIB_DOGM128_2X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_dogm128_2x_parallel, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
{ }
};
class U8GLIB_LM6059 : public U8GLIB
@ -282,6 +342,17 @@ class U8GLIB_LM6059 : public U8GLIB
{ }
};
class U8GLIB_LM6059_2X : public U8GLIB
{
public:
U8GLIB_LM6059_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_lm6059_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_LM6059_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_lm6059_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_LM6063 : public U8GLIB
{
public:
@ -293,6 +364,17 @@ class U8GLIB_LM6063 : public U8GLIB
{ }
};
class U8GLIB_LM6063_2X : public U8GLIB
{
public:
U8GLIB_LM6063_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_lm6063_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_LM6063_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_lm6063_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_64128N : public U8GLIB
{
public:
@ -302,6 +384,25 @@ class U8GLIB_64128N : public U8GLIB
U8GLIB_64128N(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_hw_spi, cs, a0, reset)
{ }
U8GLIB_64128N(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_parallel, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
{ }
};
class U8GLIB_64128N_2X : public U8GLIB
{
public:
U8GLIB_64128N_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_64128N_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_2x_hw_spi, cs, a0, reset)
{ }
U8GLIB_64128N_2X(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_2x_parallel, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
{ }
};
class U8GLIB_NHD_C12864 : public U8GLIB
@ -315,6 +416,111 @@ class U8GLIB_NHD_C12864 : public U8GLIB
{ }
};
class U8GLIB_NHD_C12864_2X : public U8GLIB
{
public:
U8GLIB_NHD_C12864_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_nhd_c12864_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_NHD_C12864_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_nhd_c12864_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1601_C128032 : public U8GLIB
{
public:
U8GLIB_UC1601_C128032(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1601_c128032_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1601_C128032(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1601_c128032_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1601_C128032_2X : public U8GLIB
{
public:
U8GLIB_UC1601_C128032_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1601_c128032_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1601_C128032_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1601_c128032_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1608_240X64 : public U8GLIB
{
public:
U8GLIB_UC1608_240X64(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x64_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1608_240X64(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x64_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1608_240X64_2X : public U8GLIB
{
public:
U8GLIB_UC1608_240X64_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x64_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1608_240X64_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x64_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1608_240X128 : public U8GLIB
{
public:
U8GLIB_UC1608_240X128(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x128_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1608_240X128(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x128_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1608_240X128_2X : public U8GLIB
{
public:
U8GLIB_UC1608_240X128_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x128_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1608_240X128_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1608_240x128_2x_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1611_DOGM240 : public U8GLIB
{
public:
U8GLIB_UC1611_DOGM240(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_uc1611_dogm240_i2c, options)
{}
U8GLIB_UC1611_DOGM240(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1611_dogm240_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1611_DOGM240(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1611_dogm240_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_UC1611_DOGXL240 : public U8GLIB
{
public:
U8GLIB_UC1611_DOGXL240(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_uc1611_dogxl240_i2c, options)
{}
U8GLIB_UC1611_DOGXL240(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1611_dogxl240_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_UC1611_DOGXL240(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1611_dogxl240_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_ST7920_128X64 : public U8GLIB
{
@ -349,6 +555,14 @@ class U8GLIB_ST7920_128X64_1X : public U8GLIB
{ }
};
class U8GLIB_ST7920_128X64_CUSTOM_1X : public U8GLIB
{
public:
U8GLIB_ST7920_128X64_CUSTOM_1X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7920_128x64_custom, sck, mosi, cs, U8G_PIN_NONE, reset) // a0 = U8G_PIN_NONE
{ }
};
class U8GLIB_ST7920_128X64_4X : public U8GLIB
{
public:
@ -364,6 +578,13 @@ class U8GLIB_ST7920_128X64_4X : public U8GLIB
{ }
};
class U8GLIB_ST7920_128X64_CUSTOM_4X : public U8GLIB
{
public:
U8GLIB_ST7920_128X64_CUSTOM_4X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7920_128x64_4x_custom, sck, mosi, cs, U8G_PIN_NONE, reset) // a0 = U8G_PIN_NONE
{ }
};
class U8GLIB_ST7920_192X32 : public U8GLIB // OBSOLETE, use U8GLIB_ST7920_192X32_1X instead
@ -485,7 +706,7 @@ class U8GLIB_LC7981_240X128 : public U8GLIB
{ }
};
// 16 bit mode required: Remove comment from "#define U8G_16BIT 1" in utility/u8g.h
// 16 bit mode required: Remove comment from "#define U8G_16BIT 1" in utility/utility/u8g.h
class U8GLIB_LC7981_320X64 : public U8GLIB
{
public:
@ -581,6 +802,10 @@ class U8GLIB_NHD31OLED_BW : public U8GLIB
U8GLIB_NHD31OLED_BW(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1322_nhd31oled_bw_hw_spi, cs, a0, reset)
{ }
U8GLIB_NHD31OLED_BW(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t cs, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1322_nhd31oled_bw_parallel, d0, d1, d2, d3, d4, d5, d6, d7, U8G_PIN_NONE, cs, U8G_PIN_NONE, di, rw, reset)
{ }
};
class U8GLIB_NHD31OLED_2X_BW : public U8GLIB
@ -603,6 +828,10 @@ class U8GLIB_NHD31OLED_GR : public U8GLIB
U8GLIB_NHD31OLED_GR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1322_nhd31oled_gr_hw_spi, cs, a0, reset)
{ }
U8GLIB_NHD31OLED_GR(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t cs, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1322_nhd31oled_gr_parallel, d0, d1, d2, d3, d4, d5, d6, d7, U8G_PIN_NONE, cs, U8G_PIN_NONE, di, rw, reset)
{ }
};
class U8GLIB_NHD31OLED_2X_GR : public U8GLIB
@ -629,7 +858,63 @@ class U8GLIB_SSD1306_128X64 : public U8GLIB
U8GLIB_SSD1306_128X64(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x64_i2c, options)
{ }
};
class U8GLIB_SSD1306_ADAFRUIT_128X64 : public U8GLIB
{
public:
U8GLIB_SSD1306_ADAFRUIT_128X64(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1306_adafruit_128x64_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1306_ADAFRUIT_128X64(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1306_adafruit_128x64_hw_spi, cs, a0, reset)
{ }
U8GLIB_SSD1306_ADAFRUIT_128X64(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_ssd1306_adafruit_128x64_i2c, options)
{ }
};
class U8GLIB_SSD1306_128X64_2X : public U8GLIB
{
public:
U8GLIB_SSD1306_128X64_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x64_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1306_128X64_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x64_2x_hw_spi, cs, a0, reset)
{ }
U8GLIB_SSD1306_128X64_2X(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x64_2x_i2c, options)
{ }
};
class U8GLIB_SH1106_128X64 : public U8GLIB
{
public:
U8GLIB_SH1106_128X64(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_sh1106_128x64_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SH1106_128X64(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_sh1106_128x64_hw_spi, cs, a0, reset)
{ }
U8GLIB_SH1106_128X64(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_sh1106_128x64_i2c, options)
{ }
};
class U8GLIB_SH1106_128X64_2X : public U8GLIB
{
public:
U8GLIB_SH1106_128X64_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_sh1106_128x64_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SH1106_128X64_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_sh1106_128x64_2x_hw_spi, cs, a0, reset)
{ }
U8GLIB_SH1106_128X64_2X(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_sh1106_128x64_2x_i2c, options)
{ }
};
class U8GLIB_SSD1309_128X64 : public U8GLIB
@ -644,7 +929,6 @@ class U8GLIB_SSD1309_128X64 : public U8GLIB
U8GLIB_SSD1309_128X64(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_ssd1309_128x64_i2c, options)
{ }
};
class U8GLIB_SSD1306_128X32 : public U8GLIB
@ -659,7 +943,20 @@ class U8GLIB_SSD1306_128X32 : public U8GLIB
U8GLIB_SSD1306_128X32(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x32_i2c, options)
{ }
};
class U8GLIB_SSD1306_128X32_2X : public U8GLIB
{
public:
U8GLIB_SSD1306_128X32_2X(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x32_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1306_128X32_2X(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x32_2x_hw_spi, cs, a0, reset)
{ }
U8GLIB_SSD1306_128X32_2X(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x32_2x_i2c, options)
{ }
};
@ -713,12 +1010,43 @@ class U8GLIB_SSD1327_96X96_2X_GR : public U8GLIB
{ }
};
class U8GLIB_LD7032_60x32 : public U8GLIB
{
public:
U8GLIB_LD7032_60x32(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ld7032_60x32_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_LD7032_60x32(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ld7032_60x32_hw_spi, cs, a0, reset)
{ }
U8GLIB_LD7032_60x32(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t en, uint8_t cs1, uint8_t di, uint8_t rw = U8G_PIN_NONE, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ld7032_60x32_parallel, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, U8G_PIN_NONE, di, rw, reset)
{ }
};
class U8GLIB_HT1632_24X16 : public U8GLIB
{
public:
U8GLIB_HT1632_24X16(uint8_t wr, uint8_t data, uint8_t cs)
: U8GLIB(&u8g_dev_ht1632_24x16, wr, data, cs, U8G_PIN_NONE, U8G_PIN_NONE)
{ }
};
class U8GLIB_PCF8812 : public U8GLIB
{
public:
U8GLIB_PCF8812(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_pcf8812_96x65_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_PCF8812(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_pcf8812_96x65_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_PCD8544 : public U8GLIB
@ -727,6 +1055,9 @@ class U8GLIB_PCD8544 : public U8GLIB
U8GLIB_PCD8544(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_pcd8544_84x48_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_PCD8544(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_pcd8544_84x48_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_TLS8204_84X48 : public U8GLIB
@ -764,6 +1095,15 @@ class U8GLIB_T6963_240X128 : public U8GLIB
{ }
};
class U8GLIB_T6963_128X128 : public U8GLIB
{
public:
U8GLIB_T6963_128X128(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7,
uint8_t cs, uint8_t a0, uint8_t wr, uint8_t rd, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_t6963_128x128_8bit, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset)
{ }
};
class U8GLIB_T6963_240X64 : public U8GLIB
{
public:
@ -808,6 +1148,108 @@ class U8GLIB_ILI9325D_320x240 : public U8GLIB
{ init8BitFixedPort(&u8g_dev_ili9325d_320x240_8bit, en, cs1, di, rw, reset); }
};
class U8GLIB_SSD1351_128X128_332 : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128_332(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_332_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128_332(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_332_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128_4X_332 : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128_4X_332(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_4x_332_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128_4X_332(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_4x_332_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128GH_332 : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128GH_332(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_332_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128GH_332(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_332_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128GH_4X_332 : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128GH_4X_332(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_4x_332_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128GH_4X_332(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_4x_332_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128_IDX : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128_IDX(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_idx_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128_IDX(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_idx_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128_HICOLOR : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128_HICOLOR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_hicolor_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128_HICOLOR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_hicolor_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128_4X_HICOLOR : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128_4X_HICOLOR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_4x_hicolor_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128_4X_HICOLOR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128_4x_hicolor_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128GH_HICOLOR : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128GH_HICOLOR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_hicolor_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128GH_HICOLOR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_hicolor_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_SSD1351_128X128GH_4X_HICOLOR : public U8GLIB
{
public:
U8GLIB_SSD1351_128X128GH_4X_HICOLOR(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_4x_hicolor_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_SSD1351_128X128GH_4X_HICOLOR(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_ssd1351_128x128gh_4x_hicolor_hw_spi, cs, a0, reset)
{ }
};
class U8GLIB_FLIPDISC_2X7 : public U8GLIB
{
public:

131
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/A2Printer/A2Printer.ino Normal file
View File

@ -0,0 +1,131 @@
/*
A2Printer.pde
Special example code for the A2 Mciro Printer (https://www.sparkfun.com/products/10438)
Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
Copyright (c) 2013, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "U8glib.h"
// use this serial interface
#define PRINTER_SERIAL Serial
// #define PRINTER_SERIAL Serial1
uint8_t u8g_com_uart(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch(msg) {
case U8G_COM_MSG_WRITE_BYTE:
PRINTER_SERIAL.write(arg_val);
break;
}
return 1;
}
// setup u8g object, please remove comment from one of the following constructor calls
// half resolution
//U8GLIB u8g(&u8g_dev_a2_micro_printer_192x120_ds, (u8g_com_fnptr)u8g_com_uart);
// full resolution, requires to uncomment U8G_16BIT in u8g.h
//U8GLIB u8g(&u8g_dev_a2_micro_printer_384x240, (u8g_com_fnptr)u8g_com_uart);
// half resolution, extra log, requires to uncomment U8G_16BIT in u8g.h
//U8GLIB u8g(&u8g_dev_a2_micro_printer_192x360_ds, (u8g_com_fnptr)u8g_com_uart);
U8GLIB u8g(&u8g_dev_a2_micro_printer_192x720_ds, (u8g_com_fnptr)u8g_com_uart);
void drawLogo(uint8_t d) {
u8g.setFont(u8g_font_gdr25r);
u8g.drawStr(0+d, 30+d, "U");
u8g.setFont(u8g_font_gdr30n);
u8g.drawStr90(23+d,10+d,"8");
u8g.setFont(u8g_font_gdr25r);
u8g.drawStr(53+d,30+d,"g");
u8g.drawHLine(2+d, 35+d, 47);
u8g.drawVLine(45+d, 32+d, 12);
}
void drawURL(void) {
u8g.setFont(u8g_font_4x6);
if ( u8g.getHeight() < 59 ) {
u8g.drawStr(53,9,"code.google.com");
u8g.drawStr(77,18,"/p/u8glib");
}
else {
u8g.drawStr(1,54,"code.google.com/p/u8glib");
}
}
void draw(void) {
// graphic commands to redraw the complete screen should be placed here
drawLogo(0);
drawURL();
u8g.drawFrame(0,0,u8g.getWidth(), u8g.getHeight());
u8g.setFont(u8g_font_helvR24r);
u8g.setPrintPos(0, 100);
u8g.print(u8g.getWidth(), DEC);
u8g.print("x");
u8g.print(u8g.getHeight(), DEC);
}
void setup(void) {
PRINTER_SERIAL.begin(19200);
// flip screen, if required
// u8g.setRot180();
// assign default color value
u8g.setColorIndex(1); // pixel on
}
void loop(void) {
// picture loop: This will print the picture
u8g.firstPage();
do {
draw();
} while( u8g.nextPage() );
// send manual CR to the printer
PRINTER_SERIAL.write('\n');
// reprint the picture after 10 seconds
delay(10000);
}

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Bitmap/Bitmap.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Bitmap/Bitmap.ino
View File

@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
const uint8_t rook_bitmap[] PROGMEM = {
0x00, // 00000000

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Chess/Chess.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Chess/Chess.ino
View File

@ -43,8 +43,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -53,9 +53,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -85,19 +86,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
// DOGS102 shield configuration values

201
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Color/Color.ino Normal file
View File

@ -0,0 +1,201 @@
/*
Color.pde
"Hello World!" example code with color.
>>> Before compiling: Please remove comment from the constructor of the
>>> connected graphics display (see below).
Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
//U8GLIB_ST7920_192X32_4X u8g(10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_LM6059 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_LM6063 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_BW u8g(10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
void draw(void) {
if ( u8g.getMode() == U8G_MODE_HICOLOR || u8g.getMode() == U8G_MODE_R3G3B2) {
/* draw background (area is 128x128) */
u8g_uint_t r, g, b;
for( b = 0; b < 4; b++ )
{
for( g = 0; g < 32; g++ )
{
for( r = 0; r < 32; r++ )
{
u8g.setRGB(r<<3, g<<3, b<<4 );
u8g.drawPixel(g + b*32, r);
u8g.setRGB(r<<3, g<<3, (b<<4)+64 );
u8g.drawPixel(g + b*32, r+32);
u8g.setRGB(r<<3, g<<3, (b<<4)+128 );
u8g.drawPixel(g + b*32, r+32+32);
u8g.setRGB(r<<3, g<<3, (b<<4)+128+64 );
u8g.drawPixel(g + b*32, r+32+32+32);
}
}
}
}
// assign default color value
if ( u8g.getMode() == U8G_MODE_R3G3B2 ) {
u8g.setColorIndex(255); // white
}
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT ) {
u8g.setColorIndex(3); // max intensity
}
else if ( u8g.getMode() == U8G_MODE_BW ) {
u8g.setColorIndex(1); // pixel on
}
else if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
u8g.setFont(u8g_font_unifont);
u8g.drawStr( 0, 22, "Hello World!");
}
void setup(void) {
// flip screen, if required
// u8g.setRot180();
// set SPI backup if required
//u8g.setHardwareBackup(u8g_backup_avr_spi);
}
void loop(void) {
// picture loop
u8g.firstPage();
do {
draw();
} while( u8g.nextPage() );
// rebuild the picture after some delay
delay(500);
}

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Console/Console.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Console/Console.ino
View File

@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
// setup input buffer

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/F/F.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/F/F.ino
View File

@ -44,8 +44,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -54,9 +54,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -86,19 +87,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
void draw(void) {
// graphic commands to redraw the complete screen should be placed here

398
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/FPS/FPS.ino Normal file
View File

@ -0,0 +1,398 @@
/*
FPS.pde
>>> Before compiling: Please remove comment from the constructor of the
>>> connected graphics display (see below).
Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ST7920_192X32, SPI: FPS: Box=7.6 @=9.8 iFPS: Box=11.4 @=14.7
ST7920_192X32, 8Bit: FPS: Box=6.2 @=7.5 iFPS: Box=9.3 @=11.2
DOGM128 SW SPI: FPS: Box=5.1 @=5.9 Pix=2.6 iFPS: Box=10.2 @=11.8 Pix=5.2
DOGM128 HW SPI: FPS: Box=5.5 @=6.3 iFPS: Box=11.0 @=12.6
DOGXL160 SW SPI: FPS: Box=1.7 @=1.9 iFPS: Box=6.9 @=7.7
DOGXL160 HW SPI: FPS: Box=1.8 @=2.1
NHD27OLED_BW, SW SPI: FPS: Box=3.0 @=3.7
NHD27OLED_BW, HW SPI: FPS: Box=3.5 @=4.5
NHD27OLED_2X_BW, SW SPI: FPS: Box=3.8 @=4.9
NHD27OLED_2X_BW, HW SPI: FPS: Box=4.6 @=6.4
30 Sep 2012
NHD27OLED_BW, SW SPI: FPS: Clip=9.2 Box=3.9 @=4.4 NEW_CODE
NHD27OLED_BW, SW SPI: FPS: Clip=9.2 Box=3.6 @=4.5
NHD27OLED_BW, HW SPI: FPS: Clip=16.3 Box=4.7 @=5.6
NHD27OLED_2X_BW, SW SPI: FPS: Clip=9.7 Box=4.5 @=5.8
NHD27OLED_2X_BW, SW SPI: FPS: Clip=18.0 Box=5.8 @=7.9
1 Oct 2012
ST7920_192X32, 8Bit: FPS: Box=7.2 @=10.0
DOGM128 SW SPI: FPS: Box=5.2 @=6.6 Pix=2.6
DOGM128 HW SPI: FPS: Clip=33.2 Box=5.5 @=7.1
DOGXL160 SW SPI: FPS: Box=1.7 @=2.0
DOGXL160 HW SPI: FPS: Box=1.8 @=2.2
DOGXL160 GR SW SPI: FPS: Box=1.1 @=1.3
1 Mar 2013
ST7920_192X32_1X, SPI: FPS: Clip=10.3 Box=5.5 @=7.2 Pix=3.9
ST7920_192X32_4X, SPI: FPS: Clip=10.9 Box=6.7 @=8.8 Pix=7.4
ST7920_192X32_1X, 8Bit: FPS: Clip=14.2 Box=6.1 @=8.4 Pix=4.2
ST7920_192X32_4X, 8Bit: FPS: Clip=14.2 Box=7.8 @=10.7 Pix=8.7
ST7920_192X32_1X, HW SPI: FPS: Clip=14.2 Box=6.3 @=8.7 Pix=4.3
ST7920_192X32_4X, HW SPI: FPS: Clip=15.3 Box=8.0 @=11.2 Pix=9.0
2 Jun 2013
U8GLIB_DOGM128 SW SPI: FPS: Clip=23.9 Box=4.5 @=6.6 Pix=2.1
U8GLIB_DOGM128_2X SW SPI: FPS: Clip=28.5 Box=6.6 @=9.7 Pix=3.9
U8GLIB_DOGM128_2X HW SPI: FPS: Clip=40.8 Box=7.1 @=10.8 Pix=4.1
3 Jun 2013
U8GLIB_ST7920_192X32_1X -Os SW SPI FPS: Clip=11.0 Box=5.4 @=7.1 Pix=3.9 Size=11828
U8GLIB_ST7920_192X32_1X -O3 SW SPI FPS: Clip=10.9 Box=5.6 @=7.5 Pix=4.0 Size=13800
U8GLIB_ST7920_192X32_1X -Os SW SPI FPS: Clip=16.8 Box=6.7 @=9.6 Pix=4.5 Size=11858 (new seq data output)
U8GLIB_ST7920_192X32_1X -Os HW SPI FPS: Clip=25.7 Box=7.5 @=11.3 Pix=4.8 (new seq data output)
6 Jun 2013
U8GLIB_DOGS102 u8g(13, 11, 10, 9); STD SW SPI FPS: Clip=9.5 Box=7.6 @=8.2 Pix=6.2 Size=15652
U8GLIB_DOGS102 u8g(13, 11, 10, 9); SW SPI FPS: Clip=19.1 Box=12.8 @=14.0 Pix=9.2 Size=15532
12 Jun 2013
SSD1351_128X128_332 SW SPI Clip=1.3 Box=0.7 @=0.9 Pix=0.4
SSD1351_128X128_332 HW SPI Clip=3.6 Box=1.1 @=1.5 Pix=0.5
24 Jun 2013
Uno SSD1351_128X128_332 SW SPI Clip=1.4 Box=0.8 @=0.9 Pix=0.4
Uno SSD1351_128X128_332 HW SPI Clip=4.4 Box=1.2 @=1.6 Pix=0.5
Uno SSD1351_128X128_HICOLOR HW SPI Clip=3.7 Box=0.8 @=1.0 Pix=0.3
Mega2560 SSD1351_128X128_332 HW SPI Clip=4.4 Box=1.2 @=1.6 Pix=0.5
Mega2560 SSD1351_128X128_4X_332 HW SPI Clip=4.6 Box=2.3 @=2.8 Pix=1.5
Mega2560 SSD1351_128X128_HICOLOR HW SPI Clip=3.6 Box=0.8 @=1.0 Pix=0.3
Mega2560 SSD1351_128X128_4X_HICOLOR HW SPI Clip=4.2 Box=1.7 @=2.1 Pix=1.0
Due SSD1351_128X128_332 HW SPI Clip=24.6 Box=6.3 @=7.8 Pix=2.8
Due SSD1351_128X128_4X_332 HW SPI Clip=28.1 Box=13.0 @=15.1 Pix=8.5
Due SSD1351_128X128_HICOLOR HW SPI Clip=20.8 Box=3.4 @=4.5 Pix=1.4
Due SSD1351_128X128_4X_HICOLOR HW SPI Clip=26.3 Box=8.9 @=11.1 Pix=4.8
Due SSD1351_128X128_4X_HICOLOR SW SPI Clip=0.4 Box=0.4 @=0.4 Pix=0.4
Due DOGS102 u8g(13, 11, 10, 9); SW SPI FPS: Clip=19.1 Box=13.1 @=14.3 Pix=9.4
Due DOGS102 u8g(10, 9); HW SPI FPS: Clip=128.9 Box=30.7 @=40.6 Pix=15.4
Due NHD27OLED_BW u8g(10, 9) HW SPI FPS: Clip=53.0 Box=19.6 @=23.8 Pix=10.6
Due NHD27OLED_2X_BW u8g(10, 9) HW SPI FPS: Clip=57.0 Box=25.3 @=31.7 Pix=18.1
Due NHD27OLED_GR u8g(10, 9) HW SPI FPS: Clip=34.1 Box=11.7 @=13.7 Pix=5.6
Due NHD27OLED_2X_GR u8g(10, 9) HW SPI FPS: Clip=38.1 Box=15.5 @=20.0 Pix=8.8
*/
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
//U8GLIB_ST7920_192X32_4X u8g(10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_LM6059 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_LM6063 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_BW u8g(10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
#define SECONDS 10
uint8_t flip_color = 0;
uint8_t draw_color = 1;
void draw_set_screen(void) {
// graphic commands to redraw the complete screen should be placed here
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
if ( flip_color == 0 )
u8g.setHiColorByRGB(0,0,0);
else
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(flip_color);
}
u8g.drawBox( 0, 0, u8g.getWidth(), u8g.getHeight() );
}
void draw_clip_test(void) {
u8g_uint_t i, j, k;
char buf[3] = "AB";
k = 0;
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
u8g.setFont(u8g_font_6x10);
for( i = 0; i < 6; i++ ) {
for( j = 1; j < 8; j++ ) {
u8g.drawHLine(i-3, k, j);
u8g.drawHLine(i-3+10, k, j);
u8g.drawVLine(k+20, i-3, j);
u8g.drawVLine(k+20, i-3+10, j);
k++;
}
}
u8g.drawStr(0-3, 50, buf);
u8g.drawStr180(0+3, 50, buf);
u8g.drawStr(u8g.getWidth()-3, 40, buf);
u8g.drawStr180(u8g.getWidth()+3, 40, buf);
u8g.drawStr90(u8g.getWidth()-10, 0-3, buf);
u8g.drawStr270(u8g.getWidth()-10, 3, buf);
u8g.drawStr90(u8g.getWidth()-20, u8g.getHeight()-3, buf);
u8g.drawStr270(u8g.getWidth()-20, u8g.getHeight()+3, buf);
}
void draw_char(void) {
char buf[2] = "@";
u8g_uint_t i, j;
// graphic commands to redraw the complete screen should be placed here
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
u8g.setFont(u8g_font_6x10);
j = 8;
for(;;) {
i = 0;
for(;;) {
u8g.drawStr( i, j, buf);
i += 8;
if ( i > u8g.getWidth() )
break;
}
j += 8;
if ( j > u8g.getHeight() )
break;
}
}
void draw_pixel(void) {
u8g_uint_t x, y, w2, h2;
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
w2 = u8g.getWidth();
h2 = u8g.getHeight();
w2 /= 2;
h2 /= 2;
for( y = 0; y < h2; y++ ) {
for( x = 0; x < w2; x++ ) {
if ( (x + y) & 1 ) {
u8g.drawPixel(x,y);
u8g.drawPixel(x,y+h2);
u8g.drawPixel(x+w2,y);
u8g.drawPixel(x+w2,y+h2);
}
}
}
}
// returns unadjusted FPS
uint16_t picture_loop_with_fps(void (*draw_fn)(void)) {
uint16_t FPS10 = 0;
uint32_t time;
time = millis() + SECONDS*1000;
// picture loop
do {
u8g.firstPage();
do {
draw_fn();
} while( u8g.nextPage() );
FPS10++;
flip_color = flip_color ^ 1;
} while( millis() < time );
return FPS10;
}
const char *convert_FPS(uint16_t fps) {
static char buf[6];
strcpy(buf, u8g_u8toa( (uint8_t)(fps/10), 3));
buf[3] = '.';
buf[4] = (fps % 10) + '0';
buf[5] = '\0';
return buf;
}
void show_result(const char *s, uint16_t fps) {
// assign default color value
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
u8g.setFont(u8g_font_8x13B);
u8g.firstPage();
do {
u8g.drawStr(0,12, s);
u8g.drawStr(0,24, convert_FPS(fps));
} while( u8g.nextPage() );
}
void setup(void) {
// flip screen, if required
// u8g.setRot180();
// assign default color value
if ( u8g.getMode() == U8G_MODE_R3G3B2 )
draw_color = 255; // white
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
draw_color = 3; // max intensity
else if ( u8g.getMode() == U8G_MODE_BW )
draw_color = 1; // pixel on
else if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
}
void loop(void) {
uint16_t fps;
fps = picture_loop_with_fps(draw_clip_test);
show_result("draw clip test", fps);
delay(5000);
fps = picture_loop_with_fps(draw_set_screen);
show_result("clear screen", fps);
delay(5000);
fps = picture_loop_with_fps(draw_char);
show_result("draw @", fps);
delay(5000);
fps = picture_loop_with_fps(draw_pixel);
show_result("draw pixel", fps);
delay(5000);
}

113
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/GraphicsTest/GraphicsTest.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/GraphicsTest/GraphicsTest.ino
View File

@ -41,8 +41,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -51,9 +51,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -83,19 +84,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
void u8g_prepare(void) {
u8g.setFont(u8g_font_6x10);
@ -143,6 +179,15 @@ void u8g_line(uint8_t a) {
u8g.drawLine(7+a*4, 10, 100, 55);
}
void u8g_triangle(uint8_t a) {
uint16_t offset = a;
u8g.drawStr( 0, 0, "drawTriangle");
u8g.drawTriangle(14,7, 45,30, 10,40);
u8g.drawTriangle(14+offset,7-offset, 45+offset,30-offset, 57+offset,10-offset);
u8g.drawTriangle(57+offset*2,10, 45+offset*2,30, 86+offset*2,53);
u8g.drawTriangle(10+offset,40+offset, 45+offset,30+offset, 86+offset,53+offset);
}
void u8g_ascii_1() {
char s[2] = " ";
uint8_t x, y;
@ -167,6 +212,45 @@ void u8g_ascii_2() {
}
}
void u8g_extra_page(uint8_t a)
{
if ( u8g.getMode() == U8G_MODE_HICOLOR || u8g.getMode() == U8G_MODE_R3G3B2) {
/* draw background (area is 128x128) */
u8g_uint_t r, g, b;
b = a << 5;
for( g = 0; g < 64; g++ )
{
for( r = 0; r < 64; r++ )
{
u8g.setRGB(r<<2, g<<2, b );
u8g.drawPixel(g, r);
}
}
u8g.setRGB(255,255,255);
u8g.drawStr( 66, 0, "Color Page");
}
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
{
u8g.drawStr( 66, 0, "Gray Level");
u8g.setColorIndex(1);
u8g.drawBox(0, 4, 64, 32);
u8g.drawBox(70, 20, 4, 12);
u8g.setColorIndex(2);
u8g.drawBox(0+1*a, 4+1*a, 64-2*a, 32-2*a);
u8g.drawBox(74, 20, 4, 12);
u8g.setColorIndex(3);
u8g.drawBox(0+2*a, 4+2*a, 64-4*a, 32-4*a);
u8g.drawBox(78, 20, 4, 12);
}
else
{
u8g.drawStr( 0, 12, "setScale2x2");
u8g.setScale2x2();
u8g.drawStr( 0, 6+a, "setScale2x2");
u8g.undoScale();
}
}
uint8_t draw_state = 0;
@ -178,8 +262,10 @@ void draw(void) {
case 2: u8g_r_frame(draw_state&7); break;
case 3: u8g_string(draw_state&7); break;
case 4: u8g_line(draw_state&7); break;
case 5: u8g_ascii_1(); break;
case 6: u8g_ascii_2(); break;
case 5: u8g_triangle(draw_state&7); break;
case 6: u8g_ascii_1(); break;
case 7: u8g_ascii_2(); break;
case 8: u8g_extra_page(draw_state&7); break;
}
}
@ -188,15 +274,6 @@ void setup(void) {
// flip screen, if required
//u8g.setRot180();
// assign default color value
if ( u8g.getMode() == U8G_MODE_R3G3B2 )
u8g.setColorIndex(255); // white
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
u8g.setColorIndex(3); // max intensity
else if ( u8g.getMode() == U8G_MODE_BW )
u8g.setColorIndex(1); // pixel on
//u8g.setContrast(0x30);
pinMode(13, OUTPUT);
digitalWrite(13, HIGH);
@ -212,11 +289,11 @@ void loop(void) {
// increase the state
draw_state++;
if ( draw_state >= 7*8 )
if ( draw_state >= 9*8 )
draw_state = 0;
// rebuild the picture after some delay
delay(150);
//delay(150);
}

61
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/HelloWorld/HelloWorld.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/HelloWorld/HelloWorld.ino
View File

@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
void draw(void) {
@ -107,7 +143,6 @@ void draw(void) {
}
void setup(void) {
// flip screen, if required
// u8g.setRot180();
@ -115,13 +150,19 @@ void setup(void) {
//u8g.setHardwareBackup(u8g_backup_avr_spi);
// assign default color value
if ( u8g.getMode() == U8G_MODE_R3G3B2 )
if ( u8g.getMode() == U8G_MODE_R3G3B2 ) {
u8g.setColorIndex(255); // white
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
}
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT ) {
u8g.setColorIndex(3); // max intensity
else if ( u8g.getMode() == U8G_MODE_BW )
}
else if ( u8g.getMode() == U8G_MODE_BW ) {
u8g.setColorIndex(1); // pixel on
}
else if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
}
void loop(void) {
// picture loop
@ -131,6 +172,6 @@ void loop(void) {
} while( u8g.nextPage() );
// rebuild the picture after some delay
delay(500);
delay(50);
}

45
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Menu/Menu.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Menu/Menu.ino
View File

@ -45,6 +45,9 @@
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -53,9 +56,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -85,19 +89,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
#define KEY_NONE 0

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/PrintTest/PrintTest.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/PrintTest/PrintTest.ino
View File

@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
void draw(void) {
// graphic commands to redraw the complete screen should be placed here

50
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Rotation/Rotation.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Rotation/Rotation.ino
View File

@ -1,8 +1,8 @@
/*
HelloWorld.pde
Rotation.pde
"Hello World!" example code.
Example code for RotXXX functions.
>>> Before compiling: Please remove comment from the constructor of the
>>> connected graphics display (see below).
@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
uint8_t offset = 0;

50
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Scale/Scale.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Scale/Scale.ino
View File

@ -1,8 +1,8 @@
/*
HelloWorld.pde
Scale.pde
"Hello World!" example code.
Example code for the 2x2 scale function.
>>> Before compiling: Please remove comment from the constructor of the
>>> connected graphics display (see below).
@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
void draw(void) {

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/TextRotX/TextRotX.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/TextRotX/TextRotX.ino
View File

@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
// graphic commands to redraw the complete screen should be placed here
void draw(void) {

348
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Touch4WSetup/Touch4WSetup.ino Normal file
View File

@ -0,0 +1,348 @@
/*
Touch4WSetup.pde
Use this example to figure out the ranges for of the active area of a 4-wire resistive
touch panel.
>>> Before compiling: Please remove comment from the constructor of the
>>> connected graphics display (see below).
Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
//U8GLIB_ST7920_192X32_4X u8g(10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_LM6059 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_LM6063 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_BW u8g(10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//================================================================
// Setup 4-Wire Resistive Touch Panel
uint8_t tp_left = A3;
uint8_t tp_right = A5;
uint8_t tp_top = A4;
uint8_t tp_bottom = A2;
#define X_START 120
#define X_END 140
#define Y_START 120
#define Y_END 140
#define PULLUP_THRESHOLD 235
//================================================================
// Touch Panel Code
/* touch panel dimension */
struct tpd_struct
{
/* raw value */
uint8_t raw;
/* calibration values */
uint8_t start;
uint8_t end;
/* user values */
uint8_t range; /* result will have range fron 0..range (including the value of range) */
uint8_t result; /* output value: position [0...range] */
uint8_t is_pressed; /* output value: pressed (=1) or not pressed (=0) */
uint8_t is_update; /* will be set to 1 if result or is_pressed has been updated */
};
struct tp_struct
{
struct tpd_struct x;
struct tpd_struct y;
uint8_t is_pressed; /* combination of x.is_pressed && y.is_pressed */
uint8_t is_update;
};
struct tp_struct tp;
/* map raw value to 0...range (result) */
void tpd_map_touch_position(struct tpd_struct *d, uint8_t raw)
{
uint8_t is_pressed;
uint16_t p;
uint8_t start, end;
d->raw = raw;
start = d->start;
end = d->end;
/* check if position is within active area; store result in "is_pressed" */
is_pressed = 1;
if ( raw >= PULLUP_THRESHOLD )
{
d->result = 0;
is_pressed = 0;
}
else
{
/* update start and end */
if ( raw < start )
{
start = raw;
d->start = raw;
}
if ( raw > end )
{
end = raw;
d->end = raw;
}
}
/* store "is_pressed" in the global structure, set update flag */
if ( d->is_pressed != is_pressed )
d->is_update = 1;
d->is_pressed = is_pressed;
/* map "raw" value into target range */
if ( is_pressed != 0 )
{
p = raw;
p -= start;
p *= d->range;
end -= start;
p /= end;
if ( d->result != p )
d->is_update = 1;
d->result = p;
}
}
void tp_Init(uint8_t width, uint8_t height)
{
tp.x.start = X_START;
tp.x.end = X_END;
tp.x.range = width-1;
tp.y.start = Y_START;
tp.y.end = Y_END;
tp.y.range = height-1;
tp.is_update = 1;
}
void setTouchRawValues(uint8_t x, uint8_t y)
{
tpd_map_touch_position(&(tp.x), x);
tpd_map_touch_position(&(tp.y), y);
tp.is_pressed = tp.x.is_pressed && tp.y.is_pressed;
if ( tp.x.is_update || tp.y.is_update )
tp.is_update = 1;
}
uint8_t getTouchPos(uint8_t hiPin, uint8_t lowPin, uint8_t sensePin, uint8_t dcPin)
{
uint8_t val;
pinMode(dcPin, INPUT);
pinMode(sensePin, INPUT_PULLUP);
pinMode(hiPin, OUTPUT);
pinMode(lowPin, OUTPUT);
digitalWrite(hiPin, HIGH);
digitalWrite(lowPin, LOW);
delay(10);
val = analogRead(sensePin) >> 2;
pinMode(hiPin, INPUT);
pinMode(lowPin, INPUT);
delay(10);
return val;
}
void updateTouchPanel(void)
{
uint8_t tp_raw_x;
uint8_t tp_raw_y;
tp_raw_x = getTouchPos(tp_right, tp_left, tp_bottom, tp_top);
tp_raw_y = getTouchPos(tp_top, tp_bottom, tp_left, tp_right);
setTouchRawValues(tp_raw_x, tp_raw_y);
}
//================================================================
// graphics output and picture loop
void center(u8g_uint_t y, const char *str)
{
u8g_uint_t x;
x = u8g.getWidth();
x -= u8g.getStrWidth(str);
x /= 2;
u8g.drawStr(x, y, str);
}
void draw(void) {
u8g.setFont(u8g_font_6x10);
center( 10, "Touch Panel Setup");
u8g.setPrintPos(0, 20); u8g.print("x_start=");u8g.print((int)tp.x.start);u8g.print(" x_end=");u8g.print((int)tp.x.end);
u8g.setPrintPos(0, 30); u8g.print("y_start=");u8g.print((int)tp.y.start);u8g.print(" y_end=");u8g.print((int)tp.y.end);
u8g.setPrintPos(0, 40); u8g.print("x=");u8g.print((int)tp.x.raw);
u8g.setPrintPos(0, 50); u8g.print("y=");u8g.print((int)tp.y.raw);
}
void setup(void) {
// flip screen, if required
// u8g.setRot180();
u8g.setCursorFont(u8g_font_cursor);
u8g.setCursorStyle(32);
tp_Init(u8g.getWidth(), u8g.getHeight());
tp.is_update = 1;
}
void loop(void) {
// update touch panel and handle return values
updateTouchPanel();
if ( tp.is_pressed != 0 )
u8g.enableCursor();
else
u8g.disableCursor();
u8g.setCursorPos(tp.x.result, u8g.getHeight()-tp.y.result-1);
// picture loop
if ( tp.is_update != 0 )
{
tp.is_update = 0;
u8g.firstPage();
do {
draw();
} while( u8g.nextPage() );
}
}

335
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/Touch4WTest/Touch4WTest.ino Normal file
View File

@ -0,0 +1,335 @@
/*
Touch4WTest.pde
>>> Before compiling: Please remove comment from the constructor of the
>>> connected graphics display (see below).
Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
//U8GLIB_ST7920_192X32_4X u8g(10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_LM6059 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_LM6063 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_BW u8g(10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//================================================================
// Setup 4-Wire Resistive Touch Panel
uint8_t tp_left = A3;
uint8_t tp_right = A5;
uint8_t tp_top = A4;
uint8_t tp_bottom = A2;
/* Run "Touch4WSetup" and enter values here */
#define X_START 64
#define X_END 200
#define Y_START 105
#define Y_END 160
//================================================================
// Touch Panel Code
/* touch panel dimension */
struct tpd_struct
{
/* raw value */
uint8_t raw;
/* calibration values */
uint8_t start;
uint8_t end;
/* user values */
uint8_t range; /* result will have range fron 0..range (including the value of range) */
uint8_t result; /* output value: position [0...range] */
uint8_t is_pressed; /* output value: pressed (=1) or not pressed (=0) */
uint8_t is_update; /* will be set to 1 if result or is_pressed has been updated */
};
struct tp_struct
{
struct tpd_struct x;
struct tpd_struct y;
uint8_t is_pressed; /* combination of x.is_pressed && y.is_pressed */
uint8_t is_update;
};
struct tp_struct tp;
/* map raw value to 0...range (result) */
void tpd_map_touch_position(struct tpd_struct *d, uint8_t raw)
{
uint8_t is_pressed;
uint16_t p;
uint8_t start, end;
d->raw = raw;
start = d->start;
end = d->end;
/* check if position is within active area; store result in "is_pressed" */
is_pressed = 1;
if ( raw < start )
{
d->result = 0;
is_pressed = 0;
}
if ( raw >= end )
{
d->result = d->range;
is_pressed = 0;
}
/* store "is_pressed" in the global structure, set update flag */
if ( d->is_pressed != is_pressed )
d->is_update = 1;
d->is_pressed = is_pressed;
/* map "raw" value into target range */
if ( is_pressed != 0 )
{
p = raw;
p -= start;
p *= d->range;
end -= start;
p /= end;
if ( d->result != p )
d->is_update = 1;
d->result = p;
}
}
void tp_Init(uint8_t width, uint8_t height)
{
tp.x.start = X_START;
tp.x.end = X_END;
tp.x.range = width-1;
tp.y.start = Y_START;
tp.y.end = Y_END;
tp.y.range = height-1;
tp.is_update = 1;
}
void setTouchRawValues(uint8_t x, uint8_t y)
{
tpd_map_touch_position(&(tp.x), x);
tpd_map_touch_position(&(tp.y), y);
tp.is_pressed = tp.x.is_pressed && tp.y.is_pressed;
if ( tp.x.is_update || tp.y.is_update )
tp.is_update = 1;
}
uint8_t getTouchPos(uint8_t hiPin, uint8_t lowPin, uint8_t sensePin, uint8_t dcPin)
{
uint8_t val;
pinMode(dcPin, INPUT);
pinMode(sensePin, INPUT_PULLUP);
pinMode(hiPin, OUTPUT);
pinMode(lowPin, OUTPUT);
digitalWrite(hiPin, HIGH);
digitalWrite(lowPin, LOW);
delay(10);
val = analogRead(sensePin) >> 2;
pinMode(hiPin, INPUT);
pinMode(lowPin, INPUT);
delay(10);
return val;
}
void updateTouchPanel(void)
{
uint8_t tp_raw_x;
uint8_t tp_raw_y;
tp_raw_x = getTouchPos(tp_right, tp_left, tp_bottom, tp_top);
tp_raw_y = getTouchPos(tp_top, tp_bottom, tp_left, tp_right);
setTouchRawValues(tp_raw_x, tp_raw_y);
}
//================================================================
// graphics output and picture loop
void center(u8g_uint_t y, const char *str)
{
u8g_uint_t x;
x = u8g.getWidth();
x -= u8g.getStrWidth(str);
x /= 2;
u8g.drawStr(x, y, str);
}
void draw(void) {
u8g.setFont(u8g_font_6x10);
center( 10, "Touch Panel Test");
if ( tp.is_pressed != 0 )
{
u8g.setPrintPos(0, 20); u8g.print("x=");u8g.print((int)tp.x.result);
u8g.setPrintPos(0, 30); u8g.print("y=");u8g.print((int)(u8g.getHeight()-tp.y.result-1));
//u8g.setPrintPos(0, 40); u8g.print("x: ");u8g.print((int)tp.x.start);u8g.print("..");u8g.print((int)tp.x.end);
//u8g.setPrintPos(0, 50); u8g.print("y: ");u8g.print((int)tp.y.start);u8g.print("..");u8g.print((int)tp.y.end);
}
}
void setup(void) {
// flip screen, if required
// u8g.setRot180();
u8g.setCursorFont(u8g_font_cursor);
u8g.setCursorStyle(32);
tp_Init(u8g.getWidth(), u8g.getHeight());
}
void loop(void) {
// update touch panel and handle return values
updateTouchPanel();
if ( tp.is_pressed != 0 )
u8g.enableCursor();
else
u8g.disableCursor();
u8g.setCursorPos(tp.x.result, u8g.getHeight()-tp.y.result-1);
// picture loop
if ( tp.is_update != 0 ) {
tp.is_update = 0;
u8g.firstPage();
do {
draw();
} while( u8g.nextPage() );
}
}

61
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/U8gLogo/U8gLogo.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/U8gLogo/U8gLogo.ino
View File

@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,20 +85,56 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//#define MINI_LOGO
void drawColorBox(void)
{
@ -117,6 +154,17 @@ void drawColorBox(void)
void drawLogo(uint8_t d)
{
#ifdef MINI_LOGO
u8g.setFont(u8g_font_gdr17r);
u8g.drawStr(0+d, 22+d, "U");
u8g.setFont(u8g_font_gdr20n);
u8g.drawStr90(17+d,8+d,"8");
u8g.setFont(u8g_font_gdr17r);
u8g.drawStr(39+d,22+d,"g");
u8g.drawHLine(2+d, 25+d, 34);
u8g.drawVLine(32+d, 22+d, 12);
#else
u8g.setFont(u8g_font_gdr25r);
u8g.drawStr(0+d, 30+d, "U");
u8g.setFont(u8g_font_gdr30n);
@ -126,10 +174,12 @@ void drawLogo(uint8_t d)
u8g.drawHLine(2+d, 35+d, 47);
u8g.drawVLine(45+d, 32+d, 12);
#endif
}
void drawURL(void)
{
#ifndef MINI_LOGO
u8g.setFont(u8g_font_4x6);
if ( u8g.getHeight() < 59 )
{
@ -140,6 +190,7 @@ void drawURL(void)
{
u8g.drawStr(1,54,"code.google.com/p/u8glib");
}
#endif
}

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/XBM/XBM.pde → ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/examples/XBM/XBM.ino
View File

@ -42,8 +42,8 @@
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
@ -52,9 +52,10 @@
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
@ -84,19 +85,54 @@
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
#define u8g_logo_width 38
#define u8g_logo_height 24

1
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/license.txt
View File

@ -78,3 +78,4 @@ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/chessengine.c
View File

@ -72,7 +72,7 @@
- Castling: Need to check for fields under attack
--> done
- Check for WIN / LOSE situation, perhaps call ce_Eval() once on the top-level board setup
- Check for WIN / LOOSE situation, perhaps call ce_Eval() once on the top-level board setup
just after the real move
- cleanup cu_Move
--> almost done

1180
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g.h
View File

File diff suppressed because it is too large Load Diff

8
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_clip.c
View File

@ -50,7 +50,7 @@
uint8_t u8g_is_intersection_boolean(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1)
However, this is slower than a decision tree version:
static uint8_t u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1)
Also suprising is, that he the macro implementation is slower than the inlined version.
Also suprising is, that the macro implementation is slower than the inlined version.
The decision tree is based on the expansion of the truth table.
@ -59,7 +59,7 @@
#include "u8g.h"
#ifdef __GNUC__
#define U8G_ALWAYS_INLINE __attribute__((always_inline))
#define U8G_ALWAYS_INLINE __inline__ __attribute__((always_inline))
#else
#define U8G_ALWAYS_INLINE
#endif
@ -94,8 +94,8 @@ static uint8_t u8g_is_intersection_boolean(u8g_uint_t a0, u8g_uint_t a1, u8g_uin
#define U8G_IS_INTERSECTION_MACRO(a0,a1,v0,v1) ((uint8_t)( (v0) <= (a1) ) ? ( ( (v1) >= (a0) ) ? ( 1 ) : ( (v0) > (v1) ) ) : ( ( (v1) >= (a0) ) ? ( (v0) > (v1) ) : ( 0 ) ))
static uint8_t u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1) U8G_ALWAYS_INLINE;
static uint8_t u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1)
//static uint8_t u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1) U8G_ALWAYS_INLINE;
static uint8_t U8G_ALWAYS_INLINE u8g_is_intersection_decision_tree(u8g_uint_t a0, u8g_uint_t a1, u8g_uint_t v0, u8g_uint_t v1)
{
/* surprisingly the macro leads to larger code */
/* return U8G_IS_INTERSECTION_MACRO(a0,a1,v0,v1); */

4
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_api.c
View File

@ -36,9 +36,9 @@
#include "u8g.h"
uint8_t u8g_InitCom(u8g_t *u8g, u8g_dev_t *dev)
uint8_t u8g_InitCom(u8g_t *u8g, u8g_dev_t *dev, uint8_t clk_cycle_time)
{
return dev->com_fn(u8g, U8G_COM_MSG_INIT, 0, NULL);
return dev->com_fn(u8g, U8G_COM_MSG_INIT, clk_cycle_time, NULL);
}
void u8g_StopCom(u8g_t *u8g, u8g_dev_t *dev)

160
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_attiny85_hw_spi.c Normal file
View File

@ -0,0 +1,160 @@
/*
u8g_arduino_ATtiny85_std_hw_spi.c
Universal 8bit Graphics Library
Copyright (c) 2011, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
// Uses code from tinySPI Written by Nick Gammon
// March 2013
// ATMEL ATTINY45 / ARDUINO pin mappings
//
// +-\/-+
// RESET Ain0 (D 5) PB5 1| |8 Vcc
// CLK1 Ain3 (D 3) PB3 2| |7 PB2 (D 2) Ain1 SCK / USCK / SCL
// CLK0 Ain2 (D 4) PB4 3| |6 PB1 (D 1) pwm1 MISO / DO
// GND 4| |5 PB0 (D 0) pwm0 MOSI / DI / SDA
// +----+
#include "u8g.h"
#if defined(ARDUINO) && defined(__AVR_ATtiny85__)
#if ARDUINO < 100
#include <WProgram.h>
#else
#include <Arduino.h>
#endif
const byte DI = 0; // D0, pin 5 Data In
const byte DO = 1; // D1, pin 6 Data Out (this is *not* MOSI)
const byte USCK = 2; // D2, pin 7 Universal Serial Interface clock
uint8_t u8g_arduino_ATtiny85_spi_out(uint8_t val)
{
USIDR = val; // byte to output
USISR = _BV (USIOIF); // clear Counter Overflow Interrupt Flag, set count to zero
do
{
USICR = _BV (USIWM0) // 3-wire mode
| _BV (USICS1) | _BV (USICLK) // Software clock strobe
| _BV (USITC); // Toggle Clock Port Pin
}
while ((USISR & _BV (USIOIF)) == 0); // until Counter Overflow Interrupt Flag set
return USIDR; // return read data
}
uint8_t u8g_com_arduino_ATtiny85_std_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_INIT:
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH); // ensure SS stays high until needed
pinMode (USCK, OUTPUT);
pinMode (DO, OUTPUT);
pinMode (u8g->pin_list[U8G_PI_CS], OUTPUT);
pinMode (u8g->pin_list[U8G_PI_A0], OUTPUT);
USICR = _BV (USIWM0); // 3-wire mode
u8g_MicroDelay();
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
if ( arg_val == 0 )
{
/* disable */
u8g_MicroDelay();
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
u8g_MicroDelay();
}
else
{
/* enable */
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
u8g_MicroDelay();
}
break;
case U8G_COM_MSG_WRITE_BYTE:
u8g_arduino_ATtiny85_spi_out(arg_val);
u8g_MicroDelay();
break;
case U8G_COM_MSG_WRITE_SEQ:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_arduino_ATtiny85_spi_out(*ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_arduino_ATtiny85_spi_out(u8g_pgm_read(ptr));
ptr++;
arg_val--;
}
}
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
u8g_MicroDelay();
break;
}
return 1;
}
#else /* ARDUINO */
uint8_t u8g_com_arduino_ATtiny85_std_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
return 1;
}
#endif /* ARDUINO */

11
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_fast_parallel.c
View File

@ -49,6 +49,12 @@
u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
u8g_Init8Bit(u8g, dev, 8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
*/
#include "u8g.h"
@ -114,7 +120,8 @@ static void u8g_com_arduino_fast_parallel_init(u8g_t *u8g)
u8g_data_mask[7] = digitalPinToBitMask(u8g->pin_list[U8G_PI_D7]);
}
void u8g_com_arduino_fast_write_data_pin(uint8_t pin, uint8_t val)
/* atomic protection must be done by calling function */
static void u8g_com_arduino_fast_write_data_pin(uint8_t pin, uint8_t val)
{
if ( val != 0 )
*u8g_data_port[pin] |= u8g_data_mask[pin];
@ -125,6 +132,7 @@ void u8g_com_arduino_fast_write_data_pin(uint8_t pin, uint8_t val)
void u8g_com_arduino_fast_parallel_write(u8g_t *u8g, uint8_t val)
{
U8G_ATOMIC_START();
u8g_com_arduino_fast_write_data_pin( 0, val&1 );
val >>= 1;
u8g_com_arduino_fast_write_data_pin( 1, val&1 );
@ -142,6 +150,7 @@ void u8g_com_arduino_fast_parallel_write(u8g_t *u8g, uint8_t val)
val >>= 1;
u8g_com_arduino_fast_write_data_pin( 7, val&1 );
val >>= 1;
U8G_ATOMIC_END();
/* EN cycle time must be 1 micro second */
u8g_com_arduino_digital_write(u8g, U8G_PI_EN, HIGH);

253
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c
View File

@ -31,6 +31,98 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
SPI Clock Cycle Type
SSD1351 50ns 20 MHz
SSD1322 300ns 3.3 MHz
SSD1327 300ns
SSD1306 300ns
ST7565 400ns 2.5 MHz
ST7920 400ns
Arduino DUE
PA25 MISO
PA26 MOSI 75
PA27 SCLK 76
typedef struct {
WoReg SPI_CR; (Spi Offset: 0x00) Control Register
RwReg SPI_MR; (Spi Offset: 0x04) Mode Register
RoReg SPI_RDR; (Spi Offset: 0x08) Receive Data Register
WoReg SPI_TDR; (Spi Offset: 0x0C) Transmit Data Register
RoReg SPI_SR; (Spi Offset: 0x10) Status Register
WoReg SPI_IER; (Spi Offset: 0x14) Interrupt Enable Register
WoReg SPI_IDR; (Spi Offset: 0x18) Interrupt Disable Register
RoReg SPI_IMR; (Spi Offset: 0x1C) Interrupt Mask Register
RoReg Reserved1[4];
RwReg SPI_CSR[4]; (Spi Offset: 0x30) Chip Select Register
RoReg Reserved2[41];
RwReg SPI_WPMR; (Spi Offset: 0xE4) Write Protection Control Register
RoReg SPI_WPSR; (Spi Offset: 0xE8) Write Protection Status Register
} Spi;
Power Management Controller (PMC)
arduino-1.5.2/hardware/arduino/sam/system/CMSIS/Device/ATMEL/sam3xa/include/instance/instance_pmc.h
- enable PIO
REG_PMC_PCER0 = 1UL << ID_PIOA
- enable SPI
REG_PMC_PCER0 = 1UL << ID_SPI0
- enable PIOA and SPI0
REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
Parallel Input/Output Controller (PIO)
arduino-1.5.2/hardware/arduino/sam/system/CMSIS/Device/ATMEL/sam3xa/include/instance/instance_pioa.h
- enable special function of the pin: disable PIO on A26 and A27:
REG_PIOA_PDR = 0x0c000000
PIOA->PIO_PDR = 0x0c000000
SPI
SPI0->SPI_CR = SPI_CR_SPIDIS
SPI0->SPI_CR = SPI_CR_SWRST ;
SPI0->SPI_CR = SPI_CR_SWRST ;
SPI0->SPI_CR = SPI_CR_SPIEN
Bit 0: Master Mode = 1 (active)
Bit 1: Peripheral Select = 0 (fixed)
Bit 2: Chip Select Decode Mode = 1 (4 to 16)
Bit 4: Mode Fault Detection = 1 (disabled)
Bit 5: Wait Data Read = 0 (disabled)
Bit 7: Loop Back Mode = 0 (disabled)
Bit 16-19: Peripheral Chip Select = 0 (chip select 0)
SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS
Bit 0: Clock Polarity = 0
Bit 1: Clock Phase = 0
Bit 4-7: Bits = 0 (8 Bit)
Bit 8-15: SCBR = 1
SPI0->SPI_CSR[0] = SPI_CSR_SCBR(x) Serial Baud Rate
SCBR / 84000000 > 50 / 1000000000
SCBR / 84 > 5 / 100
SCBR > 50 *84 / 1000 --> SCBR=5
SCBR > 300*84 / 1000 --> SCBR=26
SCBR > 400*84 / 1000 --> SCBR=34
Arduino Due test code:
REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
REG_PIOA_PDR = 0x0c000000;
SPI0->SPI_CR = SPI_CR_SPIDIS;
SPI0->SPI_CR = SPI_CR_SWRST;
SPI0->SPI_CR = SPI_CR_SWRST;
SPI0->SPI_CR = SPI_CR_SPIEN;
SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS;
SPI0->SPI_CSR[0] = SPI_CSR_SCBR(30);
for(;;)
{
while( (SPI0->SPI_SR & SPI_SR_TDRE) == 0 )
;
SPI0->SPI_TDR = 0x050;
}
*/
@ -39,6 +131,17 @@
#if defined(ARDUINO)
#if defined(__AVR__)
#define U8G_ARDUINO_ATMEGA_HW_SPI
/* remove the definition for attiny */
#if __AVR_ARCH__ == 2
#undef U8G_ARDUINO_ATMEGA_HW_SPI
#endif
#if __AVR_ARCH__ == 25
#undef U8G_ARDUINO_ATMEGA_HW_SPI
#endif
#endif
#if defined(U8G_ARDUINO_ATMEGA_HW_SPI)
#include <avr/interrupt.h>
#include <avr/io.h>
@ -115,11 +218,17 @@ uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
1 1 fclk/128
*/
SPCR = 0;
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(1<<SPR0)|(0<<CPOL)|(0<<CPHA);
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
#ifdef U8G_HW_SPI_2X
SPSR = (1 << SPI2X); /* double speed, issue 89 */
#else
if ( arg_val <= U8G_SPI_CLK_CYCLE_50NS )
{
SPSR = (1 << SPI2X); /* double speed, issue 89 */
}
#endif
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@ -176,9 +285,147 @@ uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
/* #elif defined(__18CXX) || defined(__PIC32MX) */
#else /* __AVR__ */
#elif defined(__SAM3X8E__) // Arduino Due, maybe we should better check for __SAM3X8E__
#endif /* __AVR__ */
#include <Arduino.h>
/* use Arduino pin definitions */
#define PIN_SCK SCK
#define PIN_MISO MISO
#define PIN_MOSI MOSI
#define PIN_CS SS
static uint8_t u8g_spi_out(uint8_t data)
{
/* wait until tx register is empty */
while( (SPI0->SPI_SR & SPI_SR_TDRE) == 0 )
;
/* send data */
SPI0->SPI_TDR = (uint32_t)data;
return data;
}
uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_INIT:
u8g_com_arduino_assign_pin_output_high(u8g);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
/* Arduino Due specific code */
/* enable PIOA and SPI0 */
REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
/* disable PIO on A26 and A27 */
REG_PIOA_PDR = 0x0c000000;
/* reset SPI0 (from sam lib) */
SPI0->SPI_CR = SPI_CR_SPIDIS;
SPI0->SPI_CR = SPI_CR_SWRST;
SPI0->SPI_CR = SPI_CR_SWRST;
SPI0->SPI_CR = SPI_CR_SPIEN;
u8g_MicroDelay();
/* master mode, no fault detection, chip select 0 */
SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS;
/* Polarity, Phase, 8 Bit data transfer, baud rate */
/* x * 1000 / 84 --> clock cycle in ns
5 * 1000 / 84 = 58 ns
SCBR > 50 *84 / 1000 --> SCBR=5
SCBR > 300*84 / 1000 --> SCBR=26
SCBR > 400*84 / 1000 --> SCBR=34
*/
if ( arg_val <= U8G_SPI_CLK_CYCLE_50NS )
{
SPI0->SPI_CSR[0] = SPI_CSR_SCBR(5) | 1;
}
else if ( arg_val <= U8G_SPI_CLK_CYCLE_300NS )
{
SPI0->SPI_CSR[0] = SPI_CSR_SCBR(26) | 1;
}
else if ( arg_val <= U8G_SPI_CLK_CYCLE_400NS )
{
SPI0->SPI_CSR[0] = SPI_CSR_SCBR(34) | 1;
}
else
{
SPI0->SPI_CSR[0] = SPI_CSR_SCBR(84) | 1;
}
u8g_MicroDelay();
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
u8g_MicroDelay();
break;
case U8G_COM_MSG_CHIP_SELECT:
if ( arg_val == 0 )
{
/* disable */
u8g_MicroDelay(); /* this delay is required to avoid that the display is switched off too early --> DOGS102 with DUE */
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
u8g_MicroDelay();
}
else
{
/* enable */
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
u8g_MicroDelay();
}
break;
case U8G_COM_MSG_RESET:
if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_WRITE_BYTE:
u8g_spi_out(arg_val);
u8g_MicroDelay();
break;
case U8G_COM_MSG_WRITE_SEQ:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_spi_out(*ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_spi_out(u8g_pgm_read(ptr));
ptr++;
arg_val--;
}
}
break;
}
return 1;
}
#else /* U8G_ARDUINO_ATMEGA_HW_SPI */
#endif /* U8G_ARDUINO_ATMEGA_HW_SPI */
#else /* ARDUINO */

159
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_usart_spi.c Normal file
View File

@ -0,0 +1,159 @@
/*
u8g_com_arduino_hw_usart_spi.c
Universal 8bit Graphics Library
Copyright (c) 2011, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
SPI Clock Cycle Type
SSD1351 50ns 20 MHz
SSD1322 300ns 3.3 MHz
SSD1327 300ns
SSD1306 300ns
ST7565 400ns 2.5 MHz
ST7920 400ns
*/
#include "u8g.h"
#if defined(ARDUINO)
#if defined(__AVR_ATmega32U4__ )
#include <avr/interrupt.h>
#include <avr/io.h>
#if ARDUINO < 100
#include <WProgram.h>
#else
#include <Arduino.h>
#endif
static uint8_t u8g_usart_spi_out(uint8_t data)
{
/* send data */
UDR1 = data;
/* wait for empty transmit buffer */
while(!(UCSR1A & (1 << UDRE1)));
return UDR1;
}
uint8_t u8g_com_arduino_hw_usart_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_INIT:
/* SCK is already an output as we overwrite TXLED */
u8g_com_arduino_assign_pin_output_high(u8g);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
// Init interface at 2MHz
UBRR1 = 0x00;
UCSR1C = (1 << UMSEL11) | (1 << UMSEL10);
UCSR1B = (1 << TXEN1);
UBRR1 = 3;
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
if ( arg_val == 0 )
{
/* disable */
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
}
else
{
/* enable */
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
}
break;
case U8G_COM_MSG_RESET:
if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_WRITE_BYTE:
u8g_usart_spi_out(arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_usart_spi_out(*ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_usart_spi_out(u8g_pgm_read(ptr));
ptr++;
arg_val--;
}
}
break;
}
return 1;
}
/* #elif defined(__18CXX) || defined(__PIC32MX) */
/* #elif defined(__arm__) // Arduino Due, maybe we should better check for __SAM3X8E__ */
#else /* __AVR_ATmega32U4__ */
#endif /* __AVR_ATmega32U4__ */
#else /* ARDUINO */
uint8_t u8g_com_arduino_hw_usart_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
return 1;
}
#endif /* ARDUINO */

15
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_no_en_parallel.c
View File

@ -48,6 +48,12 @@
u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
u8g_Init8Bit(u8g, dev, 8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
*/
@ -97,17 +103,23 @@ static void u8g_com_arduino_no_en_parallel_init(u8g_t *u8g)
u8g_data_mask[7] = digitalPinToBitMask(u8g->pin_list[U8G_PI_D7]);
}
void u8g_com_arduino_no_en_write_data_pin(uint8_t pin, uint8_t val)
/* No atomic protcetion. This is done by caller */
static void u8g_com_arduino_no_en_write_data_pin(uint8_t pin, uint8_t val)
{
if ( val != 0 )
{
*u8g_data_port[pin] |= u8g_data_mask[pin];
}
else
{
*u8g_data_port[pin] &= ~u8g_data_mask[pin];
}
}
void u8g_com_arduino_no_en_parallel_write(u8g_t *u8g, uint8_t val)
{
U8G_ATOMIC_START();
u8g_com_arduino_no_en_write_data_pin( 0, val&1 );
val >>= 1;
u8g_com_arduino_no_en_write_data_pin( 1, val&1 );
@ -125,6 +137,7 @@ void u8g_com_arduino_no_en_parallel_write(u8g_t *u8g, uint8_t val)
val >>= 1;
u8g_com_arduino_no_en_write_data_pin( 7, val&1 );
val >>= 1;
U8G_ATOMIC_END();
/* EN cycle time must be 1 micro second, digitalWrite is slow enough to do this */
if ( u8g->pin_list[U8G_PI_CS_STATE] == 1 )

5
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_parallel.c
View File

@ -1,6 +1,6 @@
/*
u8g_arduino_parallel.c
u8g_com_arduino_parallel.c
Universal 8bit Graphics Library
@ -87,13 +87,10 @@ void u8g_com_arduino_parallel_write(u8g_t *u8g, uint8_t val)
u8g_com_arduino_digital_write(u8g, U8G_PI_D7, val&1);
/* EN cycle time must be 1 micro second, digitalWrite is slow enough to do this */
//u8g_Delay(1);
u8g_com_arduino_digital_write(u8g, U8G_PI_EN, HIGH);
//u8g_Delay(1);
u8g_MicroDelay(); /* delay by 1000ns, reference: ST7920: 140ns, SBN1661: 100ns */
u8g_com_arduino_digital_write(u8g, U8G_PI_EN, LOW);
u8g_10MicroDelay(); /* ST7920 commands: 72us */
//u8g_Delay(2);
}

9
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_port_d_wr.c
View File

@ -42,6 +42,13 @@
u8g_Init8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, en, cs1, cs2, di, rw, reset)
u8g_Init8Bit(u8g, dev, 8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16, U8G_PIN_NONE)
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
*/
#include "u8g.h"
@ -80,8 +87,10 @@ uint8_t u8g_com_arduino_port_d_wr_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, v
#ifdef UCSR0B
UCSR0B = 0; // disable USART 0
#endif
U8G_ATOMIC_START();
DDRD = 0x0ff;
PORTD = 0x0ff;
U8G_ATOMIC_END();
/* setup the RW pin as output and force it to low */
if ( u8g->pin_list[U8G_PI_RW] != U8G_PIN_NONE )

15
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_ssd_i2c.c
View File

@ -54,12 +54,14 @@
#include "u8g.h"
#if defined(U8G_WITH_PINLIST)
#define I2C_SLA (0x3c*2)
//#define I2C_CMD_MODE 0x080
#define I2C_CMD_MODE 0x000
#define I2C_DATA_MODE 0x040
uint8_t u8g_com_arduino_ssd_start_sequence(u8g_t *u8g)
{
/* are we requested to set the a0 state? */
@ -80,7 +82,6 @@ uint8_t u8g_com_arduino_ssd_start_sequence(u8g_t *u8g)
return 0;
}
u8g->pin_list[U8G_PI_SET_A0] = 0;
return 1;
}
@ -199,3 +200,13 @@ uint8_t u8g_com_arduino_ssd_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, voi
}
return 1;
}
#else /* defined(U8G_WITH_PINLIST) */
uint8_t u8g_com_arduino_ssd_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
return 1;
}
#endif /* defined(U8G_WITH_PINLIST) */

330
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_st7920_custom.c Normal file
View File

@ -0,0 +1,330 @@
/*
u8g_com_arduino_st7920_custom.c
Additional COM device, initially introduced for 3D Printer community
Implements a fast SW SPI com subsystem
Universal 8bit Graphics Library
Copyright (c) 2011, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
A special SPI interface for ST7920 controller
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
*/
#include "u8g.h"
#if defined(ARDUINO)
#if ARDUINO < 100
#include <WProgram.h>
#include "wiring_private.h"
#include "pins_arduino.h"
#else
#include <Arduino.h>
#include "wiring_private.h"
#endif
#if defined(__AVR__)
static uint8_t u8g_bitData, u8g_bitNotData;
static uint8_t u8g_bitClock, u8g_bitNotClock;
static volatile uint8_t *u8g_outData;
static volatile uint8_t *u8g_outClock;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
{
u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
u8g_outClock = portOutputRegister(digitalPinToPort(clockPin));
u8g_bitData = digitalPinToBitMask(dataPin);
u8g_bitClock = digitalPinToBitMask(clockPin);
u8g_bitNotClock = u8g_bitClock;
u8g_bitNotClock ^= 0x0ff;
u8g_bitNotData = u8g_bitData;
u8g_bitNotData ^= 0x0ff;
}
static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val) U8G_NOINLINE;
static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
{
uint8_t cnt = 8;
uint8_t bitData = u8g_bitData;
uint8_t bitNotData = u8g_bitNotData;
uint8_t bitClock = u8g_bitClock;
uint8_t bitNotClock = u8g_bitNotClock;
volatile uint8_t *outData = u8g_outData;
volatile uint8_t *outClock = u8g_outClock;
U8G_ATOMIC_START();
bitData |= *outData;
bitNotData &= *outData;
do
{
if ( val & 128 )
*outData = bitData;
else
*outData = bitNotData;
/*
*outClock |= bitClock;
val <<= 1;
cnt--;
*outClock &= bitNotClock;
*/
val <<= 1;
*outClock &= bitNotClock;
cnt--;
// removed micro delays, because AVRs are too slow and the delay is not required
//u8g_MicroDelay();
*outClock |= bitClock;
//u8g_MicroDelay();
} while( cnt != 0 );
U8G_ATOMIC_END();
}
#elif defined(__18CXX) || defined(__PIC32MX)
uint16_t dog_bitData, dog_bitNotData;
uint16_t dog_bitClock, dog_bitNotClock;
volatile uint32_t *dog_outData;
volatile uint32_t *dog_outClock;
volatile uint32_t dog_pic32_spi_tmp;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
{
dog_outData = portOutputRegister(digitalPinToPort(dataPin));
dog_outClock = portOutputRegister(digitalPinToPort(clockPin));
dog_bitData = digitalPinToBitMask(dataPin);
dog_bitClock = digitalPinToBitMask(clockPin);
dog_bitNotClock = dog_bitClock;
dog_bitNotClock ^= 0x0ffff;
dog_bitNotData = dog_bitData;
dog_bitNotData ^= 0x0ffff;
}
static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
{
uint8_t cnt = 8;
U8G_ATOMIC_START();
do
{
if ( val & 128 )
*dog_outData |= dog_bitData;
else
*dog_outData &= dog_bitNotData;
val <<= 1;
//u8g_MicroDelay();
//*dog_outClock |= dog_bitClock;
*dog_outClock &= dog_bitNotClock;
cnt--;
u8g_MicroDelay();
//*dog_outClock &= dog_bitNotClock;
*dog_outClock |= dog_bitClock;
u8g_MicroDelay();
} while( cnt != 0 );
U8G_ATOMIC_END();
}
#else
/* default interface, Arduino DUE (__arm__) */
uint8_t u8g_data_custom_pin;
uint8_t u8g_clock_custom_pin;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
{
u8g_data_custom_pin = dataPin;
u8g_clock_custom_pin = clockPin;
}
static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
{
uint8_t cnt = 8;
do
{
if ( val & 128 )
digitalWrite(u8g_data_custom_pin, HIGH);
else
digitalWrite(u8g_data_custom_pin, LOW);
val <<= 1;
//u8g_MicroDelay();
digitalWrite(u8g_clock_custom_pin, LOW);
cnt--;
u8g_MicroDelay();
digitalWrite(u8g_clock_custom_pin, HIGH);
u8g_MicroDelay();
} while( cnt != 0 );
}
#endif
static void u8g_com_arduino_st7920_write_byte_seq(uint8_t rs, uint8_t *ptr, uint8_t len)
{
uint8_t i;
if ( rs == 0 )
{
/* command */
u8g_com_arduino_do_shift_out_msb_first(0x0f8);
}
else if ( rs == 1 )
{
/* data */
u8g_com_arduino_do_shift_out_msb_first(0x0fa);
}
while( len > 0 )
{
u8g_com_arduino_do_shift_out_msb_first(*ptr & 0x0f0);
u8g_com_arduino_do_shift_out_msb_first(*ptr << 4);
ptr++;
len--;
u8g_10MicroDelay();
}
for( i = 0; i < 4; i++ )
u8g_10MicroDelay();
}
static void u8g_com_arduino_st7920_write_byte(uint8_t rs, uint8_t val)
{
uint8_t i;
if ( rs == 0 )
{
/* command */
u8g_com_arduino_do_shift_out_msb_first(0x0f8);
}
else if ( rs == 1 )
{
/* data */
u8g_com_arduino_do_shift_out_msb_first(0x0fa);
}
u8g_com_arduino_do_shift_out_msb_first(val & 0x0f0);
u8g_com_arduino_do_shift_out_msb_first(val << 4);
for( i = 0; i < 4; i++ )
u8g_10MicroDelay();
}
uint8_t u8g_com_arduino_st7920_custom_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_INIT:
u8g_com_arduino_assign_pin_output_high(u8g);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
// u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, HIGH);
u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, LOW);
u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
if ( arg_val == 0 )
{
/* disable, note: the st7920 has an active high chip select */
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
}
else
{
/* enable */
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, HIGH);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
}
break;
case U8G_COM_MSG_WRITE_BYTE:
u8g_com_arduino_st7920_write_byte( u8g->pin_list[U8G_PI_A0_STATE], arg_val);
//u8g->pin_list[U8G_PI_A0_STATE] = 2;
//u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ:
u8g_com_arduino_st7920_write_byte_seq(u8g->pin_list[U8G_PI_A0_STATE], (uint8_t *)arg_ptr, arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ_P:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_com_arduino_st7920_write_byte(u8g->pin_list[U8G_PI_A0_STATE], u8g_pgm_read(ptr) );
//u8g->pin_list[U8G_PI_A0_STATE] = 2;
ptr++;
arg_val--;
}
}
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
break;
}
return 1;
}
#else /* ARDUINO */
uint8_t u8g_com_arduino_st7920_custom_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
return 1;
}
#endif /* ARDUINO */

81
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_st7920_hw_spi.c
View File

@ -54,10 +54,10 @@
/* remove the definition for attiny */
#if __AVR_ARCH__ == 2
#undef U8G_ATMEGA_HW_SPI
#undef U8G_ARDUINO_ATMEGA_HW_SPI
#endif
#if __AVR_ARCH__ == 25
#undef U8G_ATMEGA_HW_SPI
#undef U8G_ARDUINO_ATMEGA_HW_SPI
#endif
#endif
@ -68,6 +68,33 @@
#include <avr/interrupt.h>
#include <avr/io.h>
#if ARDUINO < 100
/* fixed pins */
#if defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) // Sanguino.cc board
#define PIN_SCK 7
#define PIN_MISO 6
#define PIN_MOSI 5
#define PIN_CS 4
#else // Arduino Board
#define PIN_SCK 13
#define PIN_MISO 12
#define PIN_MOSI 11
#define PIN_CS 10
#endif // (__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
#else
/* use Arduino pin definitions */
#define PIN_SCK SCK
#define PIN_MISO MISO
#define PIN_MOSI MOSI
#define PIN_CS SS
#endif
static uint8_t u8g_arduino_st7920_hw_spi_shift_out(u8g_t *u8g, uint8_t val) U8G_NOINLINE;
static uint8_t u8g_arduino_st7920_hw_spi_shift_out(u8g_t *u8g, uint8_t val)
{
@ -81,6 +108,34 @@ static uint8_t u8g_arduino_st7920_hw_spi_shift_out(u8g_t *u8g, uint8_t val)
}
static void u8g_com_arduino_st7920_write_byte_hw_spi_seq(u8g_t *u8g, uint8_t rs, uint8_t *ptr, uint8_t len)
{
uint8_t i;
if ( rs == 0 )
{
/* command */
u8g_arduino_st7920_hw_spi_shift_out(u8g, 0x0f8);
}
else if ( rs == 1 )
{
/* data */
u8g_arduino_st7920_hw_spi_shift_out(u8g, 0x0fa);
}
while( len > 0 )
{
u8g_arduino_st7920_hw_spi_shift_out(u8g, *ptr & 0x0f0);
u8g_arduino_st7920_hw_spi_shift_out(u8g, *ptr << 4);
ptr++;
len--;
u8g_10MicroDelay();
}
for( i = 0; i < 4; i++ )
u8g_10MicroDelay();
}
static void u8g_com_arduino_st7920_write_byte_hw_spi(u8g_t *u8g, uint8_t rs, uint8_t val) U8G_NOINLINE;
static void u8g_com_arduino_st7920_write_byte_hw_spi(u8g_t *u8g, uint8_t rs, uint8_t val)
{
@ -115,14 +170,29 @@ uint8_t u8g_com_arduino_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
{
case U8G_COM_MSG_INIT:
u8g_com_arduino_assign_pin_output_high(u8g);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
/* code from u8g_com-arduino_hw_spi.c */
pinMode(PIN_SCK, OUTPUT);
digitalWrite(PIN_SCK, LOW);
pinMode(PIN_MOSI, OUTPUT);
digitalWrite(PIN_MOSI, LOW);
/* pinMode(PIN_MISO, INPUT); */
pinMode(PIN_CS, OUTPUT); /* system chip select for the atmega board */
digitalWrite(PIN_CS, HIGH);
//u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
#ifdef OBSOLETE
DDRB |= _BV(3); /* D0, MOSI */
DDRB |= _BV(5); /* SCK */
DDRB |= _BV(2); /* slave select */
PORTB &= ~_BV(3); /* D0, MOSI = 0 */
PORTB &= ~_BV(5); /* SCK = 0 */
#endif
/*
SPR1 SPR0
@ -170,15 +240,18 @@ uint8_t u8g_com_arduino_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
break;
case U8G_COM_MSG_WRITE_SEQ:
u8g_com_arduino_st7920_write_byte_hw_spi_seq(u8g, u8g->pin_list[U8G_PI_A0_STATE], (uint8_t *)arg_ptr, arg_val);
/*
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_com_arduino_st7920_write_byte_hw_spi(u8g, u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
// u8g->pin_list[U8G_PI_A0_STATE] = 2;
arg_val--;
}
}
*/
break;
case U8G_COM_MSG_WRITE_SEQ_P:

67
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_st7920_spi.c
View File

@ -33,6 +33,13 @@
A special SPI interface for ST7920 controller
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
*/
#include "u8g.h"
@ -51,10 +58,10 @@
#if defined(__AVR__)
uint8_t u8g_bitData, u8g_bitNotData;
uint8_t u8g_bitClock, u8g_bitNotClock;
volatile uint8_t *u8g_outData;
volatile uint8_t *u8g_outClock;
static uint8_t u8g_bitData, u8g_bitNotData;
static uint8_t u8g_bitClock, u8g_bitNotClock;
static volatile uint8_t *u8g_outData;
static volatile uint8_t *u8g_outClock;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
{
@ -80,12 +87,17 @@ static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
uint8_t bitNotClock = u8g_bitNotClock;
volatile uint8_t *outData = u8g_outData;
volatile uint8_t *outClock = u8g_outClock;
U8G_ATOMIC_START();
bitData |= *outData;
bitNotData &= *outData;
do
{
if ( val & 128 )
*outData |= bitData;
*outData = bitData;
else
*outData &= bitNotData;
*outData = bitNotData;
/*
*outClock |= bitClock;
@ -102,6 +114,7 @@ static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
*outClock |= bitClock;
//u8g_MicroDelay();
} while( cnt != 0 );
U8G_ATOMIC_END();
}
#elif defined(__18CXX) || defined(__PIC32MX)
@ -129,6 +142,7 @@ static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
{
uint8_t cnt = 8;
U8G_ATOMIC_START();
do
{
if ( val & 128 )
@ -146,6 +160,7 @@ static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
u8g_MicroDelay();
} while( cnt != 0 );
U8G_ATOMIC_END();
}
#else
@ -183,7 +198,33 @@ static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
#endif
static void u8g_com_arduino_st7920_write_byte_seq(uint8_t rs, uint8_t *ptr, uint8_t len)
{
uint8_t i;
if ( rs == 0 )
{
/* command */
u8g_com_arduino_do_shift_out_msb_first(0x0f8);
}
else if ( rs == 1 )
{
/* data */
u8g_com_arduino_do_shift_out_msb_first(0x0fa);
}
while( len > 0 )
{
u8g_com_arduino_do_shift_out_msb_first(*ptr & 0x0f0);
u8g_com_arduino_do_shift_out_msb_first(*ptr << 4);
ptr++;
len--;
u8g_10MicroDelay();
}
for( i = 0; i < 4; i++ )
u8g_10MicroDelay();
}
static void u8g_com_arduino_st7920_write_byte(uint8_t rs, uint8_t val)
{
@ -209,7 +250,6 @@ static void u8g_com_arduino_st7920_write_byte(uint8_t rs, uint8_t val)
}
uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
@ -243,6 +283,9 @@ uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
/* enable */
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, HIGH);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
/* 28 Dec 2013 reassign pins, fixes issue with more than one display */
/* issue 227 */
u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
}
break;
@ -253,15 +296,7 @@ uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
break;
case U8G_COM_MSG_WRITE_SEQ:
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
u8g_com_arduino_st7920_write_byte(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
//u8g->pin_list[U8G_PI_A0_STATE] = 2;
arg_val--;
}
}
u8g_com_arduino_st7920_write_byte_seq(u8g->pin_list[U8G_PI_A0_STATE], (uint8_t *)arg_ptr, arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ_P:

1
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_std_sw_spi.c
View File

@ -31,7 +31,6 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8g.h"

62
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_sw_spi.c
View File

@ -31,6 +31,12 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
*/
@ -48,6 +54,9 @@
#include "wiring_private.h"
#endif
/*=========================================================*/
/* Arduino, AVR */
#if defined(__AVR__)
uint8_t u8g_bitData, u8g_bitNotData;
@ -79,6 +88,7 @@ static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
uint8_t bitNotClock = u8g_bitNotClock;
volatile uint8_t *outData = u8g_outData;
volatile uint8_t *outClock = u8g_outClock;
U8G_ATOMIC_START();
do
{
if ( val & 128 )
@ -91,8 +101,11 @@ static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
cnt--;
*outClock &= bitNotClock;
} while( cnt != 0 );
U8G_ATOMIC_END();
}
/*=========================================================*/
/* Arduino, Chipkit */
#elif defined(__18CXX) || defined(__PIC32MX)
uint16_t dog_bitData, dog_bitNotData;
@ -118,6 +131,7 @@ static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
{
uint8_t cnt = 8;
U8G_ATOMIC_START();
do
{
if ( val & 128 )
@ -142,8 +156,54 @@ static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
dog_pic32_spi_tmp = *dog_outClock;
dog_pic32_spi_tmp = *dog_outClock;
} while( cnt != 0 );
U8G_ATOMIC_END();
}
/*=========================================================*/
/* Arduino Due */
#elif defined(__SAM3X8E__)
/* Due */
void u8g_digital_write_sam_high(uint8_t pin)
{
PIO_Set( g_APinDescription[pin].pPort, g_APinDescription[pin].ulPin) ;
}
void u8g_digital_write_sam_low(uint8_t pin)
{
PIO_Clear( g_APinDescription[pin].pPort, g_APinDescription[pin].ulPin) ;
}
static uint8_t u8g_sam_data_pin;
static uint8_t u8g_sam_clock_pin;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin)
{
u8g_sam_data_pin = dataPin;
u8g_sam_clock_pin = clockPin;
}
static void u8g_com_arduino_do_shift_out_msb_first(uint8_t val)
{
uint8_t i = 8;
do
{
if ( val & 128 )
u8g_digital_write_sam_high(u8g_sam_data_pin);
else
u8g_digital_write_sam_low(u8g_sam_data_pin);
val <<= 1;
//u8g_MicroDelay();
u8g_digital_write_sam_high(u8g_sam_clock_pin);
u8g_MicroDelay();
u8g_digital_write_sam_low(u8g_sam_clock_pin);
u8g_MicroDelay();
i--;
} while( i != 0 );
}
#else
/* empty interface */
@ -188,6 +248,8 @@ uint8_t u8g_com_arduino_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
/* enable */
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
/* issue 227 */
u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
}
break;

18
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_t6963.c
View File

@ -50,6 +50,13 @@
u8g_InitRW8Bit(u8g, dev, d0, d1, d2, d3, d4, d5, d6, d7, cs, a0, wr, rd, reset)
u8g_InitRW8Bit(u8g, dev, 8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16)
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
*/
#include "u8g.h"
@ -123,8 +130,10 @@ static void u8g_com_arduino_t6963_init(u8g_t *u8g)
u8g_data_mask[7] = digitalPinToBitMask(u8g->pin_list[U8G_PI_D7]);
}
static void u8g_com_arduino_t6963_write_data_pin(uint8_t pin, uint8_t val)
{
/* no ATOMIC protection required here, this is done by calling procedure */
if ( val != 0 )
*u8g_output_data_port[pin] |= u8g_data_mask[pin];
else
@ -134,6 +143,7 @@ static void u8g_com_arduino_t6963_write_data_pin(uint8_t pin, uint8_t val)
static void u8g_com_arduino_t6963_set_port_output(void)
{
uint8_t i;
U8G_ATOMIC_START();
for( i = 0; i < 8; i++ )
{
#if defined(__PIC32MX)
@ -147,11 +157,13 @@ static void u8g_com_arduino_t6963_set_port_output(void)
#endif
}
U8G_ATOMIC_END();
}
static void u8g_com_arduino_t6963_set_port_input(void)
{
uint8_t i;
U8G_ATOMIC_START();
for( i = 0; i < 8; i++ )
{
#if defined(__PIC32MX)
@ -167,11 +179,14 @@ static void u8g_com_arduino_t6963_set_port_input(void)
*u8g_output_data_port[i] &= ~u8g_data_mask[i]; // no pullup
#endif
}
U8G_ATOMIC_END();
}
static void u8g_com_arduino_t6963_write(u8g_t *u8g, uint8_t val)
{
U8G_ATOMIC_START();
u8g_com_arduino_t6963_write_data_pin( 0, val&1 );
val >>= 1;
u8g_com_arduino_t6963_write_data_pin( 1, val&1 );
@ -189,6 +204,7 @@ static void u8g_com_arduino_t6963_write(u8g_t *u8g, uint8_t val)
val >>= 1;
u8g_com_arduino_t6963_write_data_pin( 7, val&1 );
val >>= 1;
U8G_ATOMIC_END();
u8g_com_arduino_digital_write(u8g, U8G_PI_WR, 0);
u8g_MicroDelay(); /* 80ns, reference: t6963 datasheet */
@ -203,6 +219,7 @@ static uint8_t u8g_com_arduino_t6963_read(u8g_t *u8g)
u8g_com_arduino_digital_write(u8g, U8G_PI_RD, 0);
u8g_MicroDelay(); /* 150ns, reference: t6963 datasheet */
U8G_ATOMIC_START();
/* only read bits 0, 1 and 3 */
if ( (*u8g_input_data_port[3] & u8g_data_mask[3]) != 0 )
val++;
@ -213,6 +230,7 @@ static uint8_t u8g_com_arduino_t6963_read(u8g_t *u8g)
val <<= 1;
if ( (*u8g_input_data_port[0] & u8g_data_mask[0]) != 0 )
val++;
U8G_ATOMIC_END();
u8g_com_arduino_digital_write(u8g, U8G_PI_RD, 1);
u8g_MicroDelay(); /* 10ns, reference: t6963 datasheet */

206
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_uc_i2c.c Normal file
View File

@ -0,0 +1,206 @@
/*
u8g_com_arduino_uc_i2c.c
com interface for arduino (AND atmega) and the SSDxxxx chip (SOLOMON) variant
I2C protocol
ToDo: Rename this to u8g_com_avr_ssd_i2c.c
Universal 8bit Graphics Library
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Special pin usage:
U8G_PI_I2C_OPTION additional options
U8G_PI_A0_STATE used to store the last value of the command/data register selection
U8G_PI_SET_A0 1: Signal request to update I2C device with new A0_STATE, 0: Do nothing, A0_STATE matches I2C device
U8G_PI_SCL clock line (NOT USED)
U8G_PI_SDA data line (NOT USED)
U8G_PI_RESET reset line (currently disabled, see below)
Protocol:
SLA, Cmd/Data Selection, Arguments
The command/data register is selected by a special instruction byte, which is sent after SLA
The continue bit is always 0 so that a (re)start is equired for the change from cmd to/data mode
*/
#include "u8g.h"
#if defined(U8G_WITH_PINLIST)
#define DOGM240_SLA_CMD (0x38*2)
#define DOGM240_SLA_DATA (0x39*2)
uint8_t u8g_com_arduino_uc_start_sequence(u8g_t *u8g)
{
/* are we requested to set the a0 state? */
if ( u8g->pin_list[U8G_PI_SET_A0] == 0 )
return 1;
if ( u8g->pin_list[U8G_PI_A0_STATE] == 0 )
{
if ( u8g_i2c_start(DOGM240_SLA_CMD) == 0 )
return 0;
}
else
{
if ( u8g_i2c_start(DOGM240_SLA_DATA) == 0 )
return 0;
}
u8g->pin_list[U8G_PI_SET_A0] = 0;
return 1;
}
uint8_t u8g_com_arduino_uc_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_INIT:
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
//u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
//u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: unknown mode */
u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]);
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
/* Currently disabled, but it could be enable. Previous restrictions have been removed */
/* u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val); */
break;
case U8G_COM_MSG_CHIP_SELECT:
u8g->pin_list[U8G_PI_A0_STATE] = 0;
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */
if ( arg_val == 0 )
{
/* disable chip, send stop condition */
u8g_i2c_stop();
}
else
{
/* enable, do nothing: any byte writing will trigger the i2c start */
}
break;
case U8G_COM_MSG_WRITE_BYTE:
//u8g->pin_list[U8G_PI_SET_A0] = 1;
if ( u8g_com_arduino_uc_start_sequence(u8g) == 0 )
return u8g_i2c_stop(), 0;
if ( u8g_i2c_send_byte(arg_val) == 0 )
return u8g_i2c_stop(), 0;
// u8g_i2c_stop();
break;
case U8G_COM_MSG_WRITE_SEQ:
//u8g->pin_list[U8G_PI_SET_A0] = 1;
if ( u8g_com_arduino_uc_start_sequence(u8g) == 0 )
return u8g_i2c_stop(), 0;
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
if ( u8g_i2c_send_byte(*ptr++) == 0 )
return u8g_i2c_stop(), 0;
arg_val--;
}
}
// u8g_i2c_stop();
break;
case U8G_COM_MSG_WRITE_SEQ_P:
//u8g->pin_list[U8G_PI_SET_A0] = 1;
if ( u8g_com_arduino_uc_start_sequence(u8g) == 0 )
return u8g_i2c_stop(), 0;
{
register uint8_t *ptr = arg_ptr;
while( arg_val > 0 )
{
if ( u8g_i2c_send_byte(u8g_pgm_read(ptr)) == 0 )
return 0;
ptr++;
arg_val--;
}
}
// u8g_i2c_stop();
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
#ifdef OLD_CODE
if ( i2c_state != 0 )
{
u8g_i2c_stop();
i2c_state = 0;
}
if ( u8g_com_arduino_uc_start_sequence(arg_val) == 0 )
return 0;
/* setup bus, might be a repeated start */
/*
if ( u8g_i2c_start(I2C_SLA) == 0 )
return 0;
if ( arg_val == 0 )
{
i2c_state = 1;
if ( u8g_i2c_send_byte(I2C_CMD_MODE) == 0 )
return 0;
}
else
{
i2c_state = 2;
if ( u8g_i2c_send_byte(I2C_DATA_MODE) == 0 )
return 0;
}
*/
#endif
break;
}
return 1;
}
#else /* defined(U8G_WITH_PINLIST) */
uint8_t u8g_com_arduino_uc_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
return 1;
}
#endif /* defined(U8G_WITH_PINLIST) */

14
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_atmega_hw_spi.c
View File

@ -37,6 +37,14 @@
and
SCK is at PORTB, Pin 5
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START()
U8G_ATOMIC_END()
*/
#include "u8g.h"
@ -85,6 +93,9 @@ uint8_t u8g_com_atmega_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
u8g_SetPIOutput(u8g, U8G_PI_CS);
u8g_SetPIOutput(u8g, U8G_PI_A0);
u8g_SetPIOutput(u8g, U8G_PI_RESET);
U8G_ATOMIC_START();
DDRB |= _BV(3); /* D0, MOSI */
DDRB |= _BV(5); /* SCK */
@ -92,6 +103,9 @@ uint8_t u8g_com_atmega_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
PORTB &= ~_BV(3); /* D0, MOSI = 0 */
PORTB &= ~_BV(5); /* SCK = 0 */
U8G_ATOMIC_END();
u8g_SetPILevel(u8g, U8G_PI_CS, 1);
/*

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_atmega_parallel.c
View File

@ -1,6 +1,6 @@
/*
u8g_atmega_parallel.c
u8g_com_atmega_parallel.c
Universal 8bit Graphics Library

13
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_atmega_st7920_hw_spi.c
View File

@ -38,6 +38,12 @@
and
SCK is at PORTB, Pin 5
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START()
U8G_ATOMIC_END()
*/
@ -106,12 +112,16 @@ uint8_t u8g_com_atmega_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val
u8g_SetPIOutput(u8g, U8G_PI_CS);
//u8g_SetPIOutput(u8g, U8G_PI_A0);
U8G_ATOMIC_START();
DDRB |= _BV(3); /* D0, MOSI */
DDRB |= _BV(5); /* SCK */
DDRB |= _BV(2); /* slave select */
PORTB &= ~_BV(3); /* D0, MOSI = 0 */
PORTB &= ~_BV(5); /* SCK = 0 */
U8G_ATOMIC_END();
u8g_SetPILevel(u8g, U8G_PI_CS, 1);
/*
@ -125,7 +135,8 @@ uint8_t u8g_com_atmega_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val
/* maybe set CPOL and CPHA to 1 */
/* 20 Dez 2012: did set CPOL and CPHA to 1 in Arduino variant! */
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
/* 24 Jan 2014: implemented, see also issue 221 */
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(1<<CPOL)|(1<<CPHA);
#ifdef U8G_HW_SPI_2X
SPSR = (1 << SPI2X); /* double speed, issue 89 */
#endif

399
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_i2c.c
View File

@ -35,10 +35,13 @@
*/
#include "u8g.h"
static uint8_t u8g_i2c_err_code;
//#define U8G_I2C_WITH_NO_ACK
static uint8_t u8g_i2c_err_code;
static uint8_t u8g_i2c_opt; /* U8G_I2C_OPT_NO_ACK, SAM: U8G_I2C_OPT_DEV_1 */
/*
position values
1: start condition
@ -115,10 +118,22 @@ void u8g_i2c_init(uint8_t options)
TWSR = 0;
--> 100KHz
TWBR = 12;
TWSR = 0;
--> 400KHz
F_CPU/(2*100000)-8 --> calculate TWBR value for 100KHz
*/
u8g_i2c_opt = options;
TWSR = 0;
if ( options & U8G_I2C_OPT_FAST )
{
TWBR = F_CPU/(2*400000)-8;
}
else
{
TWBR = F_CPU/(2*100000)-8;
}
u8g_i2c_clear_error();
}
@ -128,10 +143,17 @@ uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos)
while( !(TWCR & mask) )
{
if ( cnt == 0 )
{
if ( u8g_i2c_opt & U8G_I2C_OPT_NO_ACK )
{
return 1; /* all ok */
}
else
{
u8g_i2c_set_error(U8G_I2C_ERR_TIMEOUT, pos);
return 0; /* error */
}
}
cnt--;
}
return 1; /* all ok */
@ -167,14 +189,21 @@ uint8_t u8g_i2c_start(uint8_t sla)
/* wait */
if ( u8g_i2c_wait(_BV(TWINT), 2) == 0 )
return 0;
status = TW_STATUS;
if ( u8g_i2c_opt & U8G_I2C_OPT_NO_ACK )
{
/* do not check for ACK */
}
else
{
status = TW_STATUS;
/* check status after sla */
if ( status != TW_MT_SLA_ACK )
{
u8g_i2c_set_error(U8G_I2C_ERR_BUS, 2);
return 0;
}
}
return 1;
}
@ -186,13 +215,20 @@ uint8_t u8g_i2c_send_byte(uint8_t data)
TWCR = _BV(TWINT) | _BV(TWEN);
if ( u8g_i2c_wait(_BV(TWINT), 3) == 0 )
return 0;
status = TW_STATUS;
if ( u8g_i2c_opt & U8G_I2C_OPT_NO_ACK )
{
/* do not check for ACK */
}
else
{
status = TW_STATUS;
if ( status != TW_MT_DATA_ACK )
{
u8g_i2c_set_error(U8G_I2C_ERR_BUS, 3);
return 0;
}
}
return 1;
}
@ -217,6 +253,363 @@ void twi_send(uint8_t adr, uint8_t data1, uint8_t data2)
}
*/
#elif defined(ARDUINO) && defined(__SAM3X8E__)
/* Arduino Due */
#include "Arduino.h"
#include "sam.h"
/*
Controller
TWI0 TWCK0 PA18 A DUE PCB: SCL1
TWI0 TWD0 PA17 A DUE PCB: SDA1
TWI1 TWCK1 PB13 A DUE PCB: SCL 21
TWI1 TWD1 PB12 A DUE PCB: SDA 20
Arduino definitions
#define PIN_WIRE_SDA (20u)
#define PIN_WIRE_SCL (21u)
#define WIRE_INTERFACE TWI1
#define WIRE_INTERFACE_ID ID_TWI1
#define WIRE_ISR_HANDLER TWI1_Handler
#define PIN_WIRE1_SDA (70u)
#define PIN_WIRE1_SCL (71u)
#define WIRE1_INTERFACE TWI0
#define WIRE1_INTERFACE_ID ID_TWI0
#define WIRE1_ISR_HANDLER TWI0_Handler
*/
static void i2c_400KHz_delay(void)
{
/* should be at least 4 */
/* should be 5 for 100KHz transfer speed */
/*
Arduino Due
0x NOP: 470KHz
4x NOP: 450KHz
8x NOP: 430KHz
16x NOP: 400KHz
*/
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
}
static void i2c_100KHz_delay(void)
{
/*
1x u8g_MicroDelay() ca. 130KHz
2x u8g_MicroDelay() ca. 80KHz
*/
u8g_MicroDelay();
u8g_MicroDelay();
}
uint32_t i2c_started = 0;
uint32_t i2c_scl_pin = 0;
uint32_t i2c_sda_pin = 0;
void (*i2c_delay)(void) = i2c_100KHz_delay;
const PinDescription *i2c_scl_pin_desc;
const PinDescription *i2c_sda_pin_desc;
/* maybe this can be optimized */
static void i2c_init(void)
{
i2c_sda_pin_desc = &(g_APinDescription[i2c_sda_pin]);
i2c_scl_pin_desc = &(g_APinDescription[i2c_scl_pin]);
pinMode(i2c_sda_pin, OUTPUT);
digitalWrite(i2c_sda_pin, HIGH);
pinMode(i2c_scl_pin, OUTPUT);
digitalWrite(i2c_scl_pin, HIGH);
PIO_Configure( i2c_sda_pin_desc->pPort, PIO_OUTPUT_0, i2c_sda_pin_desc->ulPin, PIO_OPENDRAIN );
PIO_Configure( i2c_scl_pin_desc->pPort, PIO_OUTPUT_0, i2c_scl_pin_desc->ulPin, PIO_OPENDRAIN );
PIO_Clear( i2c_sda_pin_desc->pPort, i2c_sda_pin_desc->ulPin) ;
PIO_Clear( i2c_scl_pin_desc->pPort, i2c_scl_pin_desc->ulPin) ;
PIO_Configure( i2c_sda_pin_desc->pPort, PIO_INPUT, i2c_sda_pin_desc->ulPin, PIO_DEFAULT ) ;
PIO_Configure( i2c_scl_pin_desc->pPort, PIO_INPUT, i2c_scl_pin_desc->ulPin, PIO_DEFAULT ) ;
i2c_delay();
}
/* actually, the scl line is not observed, so this procedure does not return a value */
static void i2c_read_scl_and_delay(void)
{
uint32_t dwMask = i2c_scl_pin_desc->ulPin;
//PIO_Configure( i2c_scl_pin_desc->pPort, PIO_INPUT, i2c_scl_pin_desc->ulPin, PIO_DEFAULT ) ;
//PIO_SetInput( i2c_scl_pin_desc->pPort, i2c_scl_pin_desc->ulPin, PIO_DEFAULT ) ;
/* set as input */
i2c_scl_pin_desc->pPort->PIO_ODR = dwMask ;
i2c_scl_pin_desc->pPort->PIO_PER = dwMask ;
i2c_delay();
}
static void i2c_clear_scl(void)
{
uint32_t dwMask = i2c_scl_pin_desc->ulPin;
/* set open collector and drive low */
//PIO_Configure( i2c_scl_pin_desc->pPort, PIO_OUTPUT_0, i2c_scl_pin_desc->ulPin, PIO_OPENDRAIN );
//PIO_SetOutput( i2c_scl_pin_desc->pPort, i2c_scl_pin_desc->ulPin, 0, 1, 0);
/* open drain, zero default output */
i2c_scl_pin_desc->pPort->PIO_MDER = dwMask;
i2c_scl_pin_desc->pPort->PIO_CODR = dwMask;
i2c_scl_pin_desc->pPort->PIO_OER = dwMask;
i2c_scl_pin_desc->pPort->PIO_PER = dwMask;
//PIO_Clear( i2c_scl_pin_desc->pPort, i2c_scl_pin_desc->ulPin) ;
}
static uint8_t i2c_read_sda(void)
{
uint32_t dwMask = i2c_sda_pin_desc->ulPin;
//PIO_Configure( i2c_sda_pin_desc->pPort, PIO_INPUT, i2c_sda_pin_desc->ulPin, PIO_DEFAULT ) ;
//PIO_SetInput( i2c_sda_pin_desc->pPort, i2c_sda_pin_desc->ulPin, PIO_DEFAULT ) ;
/* set as input */
i2c_sda_pin_desc->pPort->PIO_ODR = dwMask ;
i2c_sda_pin_desc->pPort->PIO_PER = dwMask ;
return 1;
}
static void i2c_clear_sda(void)
{
uint32_t dwMask = i2c_sda_pin_desc->ulPin;
/* set open collector and drive low */
//PIO_Configure( i2c_sda_pin_desc->pPort, PIO_OUTPUT_0, i2c_sda_pin_desc->ulPin, PIO_OPENDRAIN );
//PIO_SetOutput( i2c_sda_pin_desc->pPort, i2c_sda_pin_desc->ulPin, 0, 1, 0);
/* open drain, zero default output */
i2c_sda_pin_desc->pPort->PIO_MDER = dwMask ;
i2c_sda_pin_desc->pPort->PIO_CODR = dwMask ;
i2c_sda_pin_desc->pPort->PIO_OER = dwMask ;
i2c_sda_pin_desc->pPort->PIO_PER = dwMask ;
//PIO_Clear( i2c_sda_pin_desc->pPort, i2c_sda_pin_desc->ulPin) ;
}
static void i2c_start(void)
{
if ( i2c_started != 0 )
{
/* if already started: do restart */
i2c_read_sda(); /* SDA = 1 */
i2c_delay();
i2c_read_scl_and_delay();
}
i2c_read_sda();
/*
if (i2c_read_sda() == 0)
{
// do something because arbitration is lost
}
*/
/* send the start condition, both lines go from 1 to 0 */
i2c_clear_sda();
i2c_delay();
i2c_clear_scl();
i2c_started = 1;
}
static void i2c_stop(void)
{
/* set SDA to 0 */
i2c_clear_sda();
i2c_delay();
/* now release all lines */
i2c_read_scl_and_delay();
/* set SDA to 1 */
i2c_read_sda();
i2c_delay();
i2c_started = 0;
}
static void i2c_write_bit(uint8_t val)
{
if (val)
i2c_read_sda();
else
i2c_clear_sda();
i2c_delay();
i2c_read_scl_and_delay();
i2c_clear_scl();
}
static uint8_t i2c_read_bit(void)
{
uint8_t val;
/* do not drive SDA */
i2c_read_sda();
i2c_delay();
i2c_read_scl_and_delay();
val = i2c_read_sda();
i2c_delay();
i2c_clear_scl();
return val;
}
static uint8_t i2c_write_byte(uint8_t b)
{
i2c_write_bit(b & 128);
i2c_write_bit(b & 64);
i2c_write_bit(b & 32);
i2c_write_bit(b & 16);
i2c_write_bit(b & 8);
i2c_write_bit(b & 4);
i2c_write_bit(b & 2);
i2c_write_bit(b & 1);
/* read ack from client */
/* 0: ack was given by client */
/* 1: nothing happend during ack cycle */
return i2c_read_bit();
}
void u8g_i2c_init(uint8_t options)
{
u8g_i2c_opt = options;
u8g_i2c_clear_error();
if ( u8g_i2c_opt & U8G_I2C_OPT_FAST )
{
i2c_delay = i2c_400KHz_delay;
}
else
{
i2c_delay = i2c_100KHz_delay;
}
if ( u8g_i2c_opt & U8G_I2C_OPT_DEV_1 )
{
i2c_scl_pin = PIN_WIRE1_SCL;
i2c_sda_pin = PIN_WIRE1_SDA;
//REG_PIOA_PDR = PIO_PB12A_TWD1 | PIO_PB13A_TWCK1;
}
else
{
i2c_scl_pin = PIN_WIRE_SCL;
i2c_sda_pin = PIN_WIRE_SDA;
//REG_PIOA_PDR = PIO_PA17A_TWD0 | PIO_PA18A_TWCK0;
}
i2c_init();
}
/* sla includes also the r/w bit */
uint8_t u8g_i2c_start(uint8_t sla)
{
i2c_start();
i2c_write_byte(sla);
return 1;
}
uint8_t u8g_i2c_send_byte(uint8_t data)
{
return i2c_write_byte(data);
}
void u8g_i2c_stop(void)
{
i2c_stop();
}
#elif defined(U8G_RASPBERRY_PI)
#include <wiringPi.h>
#include <wiringPiI2C.h>
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#define I2C_SLA 0x3c
static int fd=-1;
static uint8_t i2cMode = 0;
void u8g_i2c_init(uint8_t options) {
u8g_i2c_clear_error();
u8g_i2c_opt = options;
if (wiringPiSetup() == -1) {
printf("wiringPi-Error\n");
exit(1);
}
fd = wiringPiI2CSetup(I2C_SLA);
if (fd < 0) {
printf ("Unable to open I2C device 0: %s\n", strerror (errno)) ;
exit (1) ;
}
//u8g_SetPIOutput(u8g, U8G_PI_RESET);
//u8g_SetPIOutput(u8g, U8G_PI_A0);
}
uint8_t u8g_i2c_start(uint8_t sla) {
u8g_i2c_send_mode(0);
return 1;
}
void u8g_i2c_stop(void) {
}
uint8_t u8g_i2c_send_mode(uint8_t mode) {
i2cMode = mode;
}
uint8_t u8g_i2c_send_byte(uint8_t data) {
wiringPiI2CWriteReg8(fd, i2cMode, data);
return 1;
}
uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos)
{
return 1;
}
#else
/* empty interface */

59
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_io.c
View File

@ -33,6 +33,18 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START();
U8G_ATOMIC_END();
uint8_t u8g_Pin(uint8_t port, uint8_t bitpos) Convert to internal number: AVR: port*8+bitpos, ARM: port*16+bitpos
void u8g_SetPinOutput(uint8_t internal_pin_number)
void u8g_SetPinInput(uint8_t internal_pin_number)
void u8g_SetPinLevel(uint8_t internal_pin_number, uint8_t level)
uint8_t u8g_GetPinLevel(uint8_t internal_pin_number)
*/
@ -159,9 +171,16 @@ void u8g_SetPinLevel(uint8_t internal_pin_number, uint8_t level)
volatile uint8_t * tmp = u8g_get_avr_io_ptr(u8g_avr_port_P, internal_pin_number>>3);
if ( level == 0 )
*tmp &= ~_BV(internal_pin_number&7);
{
U8G_ATOMIC_AND(tmp, ~_BV(internal_pin_number&7));
// *tmp &= ~_BV(internal_pin_number&7);
}
else
*tmp |= _BV(internal_pin_number&7);
{
U8G_ATOMIC_OR(tmp, _BV(internal_pin_number&7));
//*tmp |= _BV(internal_pin_number&7);
}
}
uint8_t u8g_GetPinLevel(uint8_t internal_pin_number)
@ -172,8 +191,31 @@ uint8_t u8g_GetPinLevel(uint8_t internal_pin_number)
return 0;
}
#elif defined(U8G_RASPBERRY_PI)
#include <wiringPi.h>
//#include "/usr/local/include/wiringPi.h"
void u8g_SetPinOutput(uint8_t internal_pin_number) {
pinMode(internal_pin_number, OUTPUT);
}
void u8g_SetPinInput(uint8_t internal_pin_number) {
pinMode(internal_pin_number, INPUT);
}
void u8g_SetPinLevel(uint8_t internal_pin_number, uint8_t level) {
digitalWrite(internal_pin_number, level);
}
uint8_t u8g_GetPinLevel(uint8_t internal_pin_number) {
return digitalRead(internal_pin_number);
}
#else
/* convert "port" and "bitpos" to internal pin number */
uint8_t u8g_Pin(uint8_t port, uint8_t bitpos)
{
port <<= 3;
@ -201,6 +243,8 @@ uint8_t u8g_GetPinLevel(uint8_t internal_pin_number)
#endif
#if defined(U8G_WITH_PINLIST)
void u8g_SetPIOutput(u8g_t *u8g, uint8_t pi)
{
uint8_t pin;
@ -216,3 +260,14 @@ void u8g_SetPILevel(u8g_t *u8g, uint8_t pi, uint8_t level)
if ( pin != U8G_PIN_NONE )
u8g_SetPinLevel(pin, level);
}
#else /* defined(U8G_WITH_PINLIST) */
void u8g_SetPIOutput(u8g_t *u8g, uint8_t pi)
{
}
void u8g_SetPILevel(u8g_t *u8g, uint8_t pi, uint8_t level)
{
}
#endif /* defined(U8G_WITH_PINLIST) */

124
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_raspberrypi_hw_spi.c Normal file
View File

@ -0,0 +1,124 @@
/*
u8g_com_raspberrypi_hw_spi.c
Universal 8bit Graphics Library
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Assumes, that
MOSI is at PORTB, Pin 3
and
SCK is at PORTB, Pin 5
Update for ATOMIC operation done (01 Jun 2013)
U8G_ATOMIC_OR(ptr, val)
U8G_ATOMIC_AND(ptr, val)
U8G_ATOMIC_START()
U8G_ATOMIC_END()
*/
#include "u8g.h"
#if defined(U8G_RASPBERRY_PI)
#include <wiringPiSPI.h>
#include <wiringPi.h>
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
uint8_t u8g_com_raspberrypi_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_INIT:
// check wiringPi setup
if (wiringPiSetup() == -1)
{
printf("wiringPi-Error\n");
exit(1);
}
if (wiringPiSPISetup (0, 100000) < 0)
{
printf ("Unable to open SPI device 0: %s\n", strerror (errno)) ;
exit (1) ;
}
u8g_SetPIOutput(u8g, U8G_PI_RESET);
u8g_SetPIOutput(u8g, U8G_PI_A0);
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
/* Done by the SPI hardware */
break;
case U8G_COM_MSG_RESET:
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_WRITE_BYTE:
wiringPiSPIDataRW (0, &arg_val, 1) ;
break;
case U8G_COM_MSG_WRITE_SEQ:
wiringPiSPIDataRW (0, arg_ptr, arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ_P:
wiringPiSPIDataRW (0, arg_ptr, arg_val);
break;
}
return 1;
}
#else
uint8_t u8g_com_raspberrypi_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
return 1;
}
#endif

176
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_raspberrypi_ssd_i2c.c Normal file
View File

@ -0,0 +1,176 @@
/*
Special pin usage:
U8G_PI_I2C_OPTION additional options
U8G_PI_A0_STATE used to store the last value of the command/data register selection
U8G_PI_SET_A0 1: Signal request to update I2C device with new A0_STATE, 0: Do nothing, A0_STATE matches I2C device
U8G_PI_SCL clock line (NOT USED)
U8G_PI_SDA data line (NOT USED)
U8G_PI_RESET reset line (currently disabled, see below)
Protocol:
SLA, Cmd/Data Selection, Arguments
The command/data register is selected by a special instruction byte, which is sent after SLA
The continue bit is always 0 so that a (re)start is equired for the change from cmd to/data mode
*/
#include "u8g.h"
#if defined(U8G_RASPBERRY_PI)
#include <wiringPi.h>
#include <wiringPiI2C.h>
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#define I2C_SLA 0x3c
#define I2C_CMD_MODE 0x000
#define I2C_DATA_MODE 0x040
#if defined(U8G_WITH_PINLIST)
uint8_t u8g_com_raspberrypi_ssd_start_sequence(u8g_t *u8g)
{
/* are we requested to set the a0 state? */
if ( u8g->pin_list[U8G_PI_SET_A0] == 0 )
return 1;
/* setup bus, might be a repeated start */
if ( u8g_i2c_start(I2C_SLA) == 0 )
return 0;
if ( u8g->pin_list[U8G_PI_A0_STATE] == 0 )
{
if ( u8g_i2c_send_mode(I2C_CMD_MODE) == 0 )
return 0;
}
else
{
if ( u8g_i2c_send_mode(I2C_DATA_MODE) == 0 )
return 0;
}
u8g->pin_list[U8G_PI_SET_A0] = 0;
return 1;
}
uint8_t u8g_com_raspberrypi_ssd_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_INIT:
u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]);
u8g_SetPIOutput(u8g, U8G_PI_RESET);
u8g_SetPIOutput(u8g, U8G_PI_A0);
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
break;
case U8G_COM_MSG_CHIP_SELECT:
u8g->pin_list[U8G_PI_A0_STATE] = 0;
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */
if ( arg_val == 0 )
{
/* disable chip, send stop condition */
u8g_i2c_stop();
}
else
{
/* enable, do nothing: any byte writing will trigger the i2c start */
}
break;
case U8G_COM_MSG_WRITE_BYTE:
//u8g->pin_list[U8G_PI_SET_A0] = 1;
if ( u8g_com_raspberrypi_ssd_start_sequence(u8g) == 0 )
return u8g_i2c_stop(), 0;
if ( u8g_i2c_send_byte(arg_val) == 0 )
return u8g_i2c_stop(), 0;
// u8g_i2c_stop();
break;
case U8G_COM_MSG_WRITE_SEQ:
//u8g->pin_list[U8G_PI_SET_A0] = 1;
if ( u8g_com_raspberrypi_ssd_start_sequence(u8g) == 0 )
return u8g_i2c_stop(), 0;
{
register uint8_t *ptr = (uint8_t *)arg_ptr;
while( arg_val > 0 )
{
if ( u8g_i2c_send_byte(*ptr++) == 0 )
return u8g_i2c_stop(), 0;
arg_val--;
}
}
// u8g_i2c_stop();
break;
case U8G_COM_MSG_WRITE_SEQ_P:
//u8g->pin_list[U8G_PI_SET_A0] = 1;
if ( u8g_com_raspberrypi_ssd_start_sequence(u8g) == 0 )
return u8g_i2c_stop(), 0;
{
register uint8_t *ptr = (uint8_t *)arg_ptr;
while( arg_val > 0 )
{
if ( u8g_i2c_send_byte(u8g_pgm_read(ptr)) == 0 )
return 0;
ptr++;
arg_val--;
}
}
// u8g_i2c_stop();
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
#ifdef OLD_CODE
if ( i2c_state != 0 )
{
u8g_i2c_stop();
i2c_state = 0;
}
if ( u8g_com_raspberrypi_ssd_start_sequence(arg_val) == 0 )
return 0;
/* setup bus, might be a repeated start */
/*
if ( u8g_i2c_start(I2C_SLA) == 0 )
return 0;
if ( arg_val == 0 )
{
i2c_state = 1;
if ( u8g_i2c_send_byte(I2C_CMD_MODE) == 0 )
return 0;
}
else
{
i2c_state = 2;
if ( u8g_i2c_send_byte(I2C_DATA_MODE) == 0 )
return 0;
}
*/
#endif
break;
}
return 1;
}
#else /* defined(U8G_WITH_PINLIST) */
uint8_t u8g_com_raspberrypi_ssd_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
return 1;
}
#endif /* defined(U8G_WITH_PINLIST) */
#endif

49
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_delay.c
View File

@ -32,6 +32,11 @@
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
void u8g_Delay(uint16_t val) Delay by "val" milliseconds
void u8g_MicroDelay(void) Delay be one microsecond
void u8g_10MicroDelay(void) Delay by 10 microseconds
*/
@ -40,19 +45,37 @@
/*==== Part 1: Derive suitable delay procedure ====*/
#if defined(ARDUINO)
# if ARDUINO < 100
# include <WProgram.h>
# else
# include <Arduino.h>
# endif
# if defined(__AVR__)
# define USE_AVR_DELAY
# elif defined(__PIC32MX)
# define USE_PIC32_DELAY
# elif defined(__arm__) /* Arduino Due */
# elif defined(__arm__) /* Arduino Due & Teensy */
# define USE_ARDUINO_DELAY
# else
# define USE_ARDUINO_DELAY
# endif
#elif defined(U8G_RASPBERRY_PI)
# define USE_RASPBERRYPI_DELAY
#elif defined(__AVR__)
# define USE_AVR_DELAY
#elif defined(__18CXX)
# define USE_PIC18_DELAY
#elif defined(__arm__)
/* do not define anything, all procedures are expected to be defined outside u8glib */
/*
void u8g_Delay(uint16_t val);
void u8g_MicroDelay(void);
void u8g_10MicroDelay(void);
*/
#else
# define USE_DUMMY_DELAY
#endif
@ -61,6 +84,26 @@
/*==== Part 2: Definition of the delay procedures ====*/
/*== Raspberry Pi Delay ==*/
#if defined (USE_RASPBERRYPI_DELAY)
#include <wiringPi.h>
//#include "/usr/local/include/wiringPi.h"
void u8g_Delay(uint16_t val) {
//delay(val);
//usleep((uint32_t)val*(uint32_t)1000);
delayMicroseconds((uint32_t)val*(uint32_t)1000);
}
void u8g_MicroDelay(void)
{
usleep(1);
}
void u8g_10MicroDelay(void)
{
usleep(10);
}
#endif
/*== AVR Delay ==*/
#if defined(USE_AVR_DELAY)
@ -144,7 +187,11 @@ void u8g_10MicroDelay(void)
#if defined(USE_ARDUINO_DELAY)
void u8g_Delay(uint16_t val)
{
#if defined(__arm__)
delayMicroseconds((uint32_t)val*(uint32_t)1000);
#else
delay(val);
#endif
}
void u8g_MicroDelay(void)
{

199
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_a2_micro_printer.c Normal file
View File

@ -0,0 +1,199 @@
/*
u8g_dev_a2_micro_printer_ds.c
Use DC2 bitmap command of the A2 Micro panel termal printer
double stroke
Universal 8bit Graphics Library
Copyright (c) 2013, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8g.h"
#define LINE_DELAY 40
uint8_t u8g_dev_a2_micro_printer_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
uint8_t y, i, j;
uint8_t *ptr;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
y = pb->p.page_y0;
ptr = pb->buf;
u8g_WriteByte(u8g, dev, 27); /* ESC */
u8g_WriteByte(u8g, dev, 55 ); /* parameter command */
u8g_WriteByte(u8g, dev, 7); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1)*/
u8g_WriteByte(u8g, dev, 160); /* 3-255 Heating time,Unit(10us),Default:80(800us) */
u8g_WriteByte(u8g, dev, 20); /* 0-255 Heating interval,Unit(10us),Default:2(20us)*/
u8g_WriteByte(u8g, dev, 18); /* DC2 */
u8g_WriteByte(u8g, dev, 42 ); /* * */
u8g_WriteByte(u8g, dev, pb->p.page_height );
u8g_WriteByte(u8g, dev, pb->width/8 );
for( i = 0; i < pb->p.page_height; i ++ )
{
for( j = 0; j < pb->width/8; j++ )
{
u8g_WriteByte(u8g, dev, *ptr);
ptr++;
}
u8g_Delay(LINE_DELAY);
y++;
}
/* set parameters back to their default values */
u8g_WriteByte(u8g, dev, 27); /* ESC */
u8g_WriteByte(u8g, dev, 55 ); /* parameter command */
u8g_WriteByte(u8g, dev, 7); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1)*/
u8g_WriteByte(u8g, dev, 80); /* 3-255 Heating time,Unit(10us),Default:80(800us) */
u8g_WriteByte(u8g, dev, 2); /* 0-255 Heating interval,Unit(10us),Default:2(20us)*/
}
break;
}
return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
}
static uint8_t u8g_dev_expand4(uint8_t val)
{
uint8_t a,b,c,d;
a = val&1;
b = (val&2)<<1;
c = (val&4)<<2;
d = (val&8)<<3;
a |=b;
a |=c;
a |=d;
a |= a<<1;
return a;
}
uint8_t u8g_dev_a2_micro_printer_double_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_FIRST:
{
//u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
//u8g_WriteByte(u8g, dev, 18); /* DC2 */
//u8g_WriteByte(u8g, dev, 42 ); /* * */
//u8g_WriteByte(u8g, dev, pb->p.total_height*2 );
//u8g_WriteByte(u8g, dev, pb->width/8*2 );
}
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
uint8_t y, i, j;
uint8_t *ptr;
uint8_t *p2;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
y = pb->p.page_y0;
ptr = pb->buf;
//u8g_WriteByte(u8g, dev, 18); /* DC2 */
//u8g_WriteByte(u8g, dev, 35 ); /* # */
//u8g_WriteByte(u8g, dev, 0x0ff ); /* max */
u8g_WriteByte(u8g, dev, 27); /* ESC */
u8g_WriteByte(u8g, dev, 55 ); /* parameter command */
u8g_WriteByte(u8g, dev, 7); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1)*/
u8g_WriteByte(u8g, dev, 160); /* 3-255 Heating time,Unit(10us),Default:80(800us) */
u8g_WriteByte(u8g, dev, 20); /* 0-255 Heating interval,Unit(10us),Default:2(20us)*/
u8g_WriteByte(u8g, dev, 18); /* DC2 */
u8g_WriteByte(u8g, dev, 42 ); /* * */
u8g_WriteByte(u8g, dev, pb->p.page_height*2 );
u8g_WriteByte(u8g, dev, pb->width/8*2 );
for( i = 0; i < pb->p.page_height; i ++ )
{
p2 = ptr;
for( j = 0; j < pb->width/8; j++ )
{
u8g_WriteByte(u8g, dev, u8g_dev_expand4(*p2 >> 4));
u8g_WriteByte(u8g, dev, u8g_dev_expand4(*p2 & 15));
p2++;
}
u8g_Delay(LINE_DELAY);
p2 = ptr;
for( j = 0; j < pb->width/8; j++ )
{
u8g_WriteByte(u8g, dev, u8g_dev_expand4(*p2 >> 4));
u8g_WriteByte(u8g, dev, u8g_dev_expand4(*p2 & 15));
p2++;
}
u8g_Delay(LINE_DELAY);
ptr += pb->width/8;
y++;
}
/* set parameters back to their default values */
u8g_WriteByte(u8g, dev, 27); /* ESC */
u8g_WriteByte(u8g, dev, 55 ); /* parameter command */
u8g_WriteByte(u8g, dev, 7); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1)*/
u8g_WriteByte(u8g, dev, 80); /* 3-255 Heating time,Unit(10us),Default:80(800us) */
u8g_WriteByte(u8g, dev, 2); /* 0-255 Heating interval,Unit(10us),Default:2(20us)*/
}
break;
}
return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
}
#if defined(U8G_16BIT)
U8G_PB_DEV(u8g_dev_a2_micro_printer_384x240, 384, 240, 8, u8g_dev_a2_micro_printer_fn, u8g_com_null_fn);
U8G_PB_DEV(u8g_dev_a2_micro_printer_192x360_ds, 192, 360, 8, u8g_dev_a2_micro_printer_double_fn, u8g_com_null_fn);
U8G_PB_DEV(u8g_dev_a2_micro_printer_192x720_ds, 192, 720, 8, u8g_dev_a2_micro_printer_double_fn, u8g_com_null_fn);
#else
U8G_PB_DEV(u8g_dev_a2_micro_printer_384x240, 240, 240, 8, u8g_dev_a2_micro_printer_fn, u8g_com_null_fn);
U8G_PB_DEV(u8g_dev_a2_micro_printer_192x360_ds, 192, 240, 8, u8g_dev_a2_micro_printer_double_fn, u8g_com_null_fn);
U8G_PB_DEV(u8g_dev_a2_micro_printer_192x720_ds, 192, 240, 8, u8g_dev_a2_micro_printer_double_fn, u8g_com_null_fn);
#endif
U8G_PB_DEV(u8g_dev_a2_micro_printer_192x120_ds, 192, 120, 8, u8g_dev_a2_micro_printer_double_fn, u8g_com_null_fn);

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_flipdisc_2x7.c
View File

@ -78,7 +78,7 @@ uint8_t u8g_dev_flipdisc_2x7_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
/* current page: pb->p.page */
/* ptr to the buffer: pb->buf */
(*u8g_write_flip_disc_matrix)(0, pb->p.page, WIDTH, pb->buf, pb->buf+WIDTH);
(*u8g_write_flip_disc_matrix)(0, pb->p.page, WIDTH, pb->buf, (uint8_t *)(pb->buf)+WIDTH);
}
break;
case U8G_DEV_MSG_CONTRAST:

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_gprof.c
View File

@ -121,7 +121,7 @@ uint8_t u8g_dev_gprof_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
case U8G_DEV_MSG_GET_PAGE_BOX:
u8g_pb_GetPageBox(pb, (u8g_box_t *)arg);
break;
case U8G_DEV_MSG_SET_COLOR_INDEX:
case U8G_DEV_MSG_SET_COLOR_ENTRY:
break;
case U8G_DEV_MSG_SET_XY_CB:
break;

281
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ht1632.c Normal file
View File

@ -0,0 +1,281 @@
/*
u8g_dev_ht1632.c
1-Bit (BW) Driver for HT1632 controller
Universal 8bit Graphics Library
Copyright (c) 2013, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
U8G_PIN_NONE can be used as argument
uint8_t u8g_InitSPI(u8g_t *u8g, u8g_dev_t *dev, uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset)
{
...
u8g->pin_list[U8G_PI_SCK] = sck;
u8g->pin_list[U8G_PI_MOSI] = mosi;
u8g->pin_list[U8G_PI_CS] = cs;
u8g->pin_list[U8G_PI_A0] = a0;
u8g->pin_list[U8G_PI_RESET] = reset;
mapping
#define DATA_PIN --> U8G_PI_MOSI
#define WR_PIN --> U8G_PI_SCK
#define CS_PIN --> U8G_PI_CS
U8G_PI_A0 --> not used
U8G_PI_RESET --> not used
Usage:
u8g_InitSPI(&u8g, &u8g_dev_ht1632_24x16, WR_PIN, DATA_IN, CS_PIN, U8G_PIN_NONE, U8G_PIN_NONE)
*/
#include "u8g.h"
#define WIDTH 24
#define HEIGHT 16
#define PAGE_HEIGHT 16
/* http://forum.arduino.cc/index.php?topic=168537.0 */
#define HT1632_CMD_SYSDIS 0x00 // CMD= 0000-0000-x Turn off oscil
#define HT1632_CMD_SYSON 0x01 // CMD= 0000-0001-x Enable system oscil
#define HT1632_CMD_LEDOFF 0x02 // CMD= 0000-0010-x LED duty cycle gen off
#define HT1632_CMD_LEDON 0x03 // CMD= 0000-0011-x LEDs ON
#define HT1632_CMD_BLOFF 0x08 // CMD= 0000-1000-x Blink OFF
#define HT1632_CMD_BLON 0x09 // CMD= 0000-1001-x Blink On
#define HT1632_CMD_SLVMD 0x10 // CMD= 0001-00xx-x Slave Mode
#define HT1632_CMD_MSTMD 0x14 // CMD= 0001-01xx-x Master Mode
#define HT1632_CMD_RCCLK 0x18 // CMD= 0001-10xx-x Use on-chip clock
#define HT1632_CMD_EXTCLK 0x1C // CMD= 0001-11xx-x Use external clock
#define HT1632_CMD_COMS00 0x20 // CMD= 0010-ABxx-x commons options
#define HT1632_CMD_COMS01 0x24 // CMD= 0010-ABxx-x commons options
#define HT1632_CMD_COMS10 0x28 // CMD= 0010-ABxx-x commons options
#define HT1632_CMD_COMS11 0x2C // P-MOS OUTPUT AND 16COMMON OPTION
#define HT1632_CMD_PWM 0xA0 // CMD= 101x-PPPP-x PWM duty cycle
#define HT1632_ID_CMD 4 /* ID = 100 - Commands */
#define HT1632_ID_RD 6 /* ID = 110 - Read RAM */
#define HT1632_ID_WR 5 /* ID = 101 - Write RAM */
#define HT1632_ID_LEN 3 // IDs are 3 bits
#define HT1632_CMD_LEN 8 // CMDs are 8 bits
#define HT1632_DATA_LEN 8 // Data are 4*2 bits
#define HT1632_ADDR_LEN 7 // Address are 7 bits
#if defined(ARDUINO)
#if ARDUINO < 100
#include <WProgram.h>
#else
#include <Arduino.h>
#endif
//#define WR_PIN 3
//#define DATA_PIN 2
//#define CS_PIN 4
void ht1632_write_data_MSB(u8g_t *u8g, uint8_t cnt, uint8_t data, uint8_t extra)
{
int8_t i;
uint8_t data_pin = u8g->pin_list[U8G_PI_MOSI];
uint8_t wr_pin = u8g->pin_list[U8G_PI_SCK];
for(i = cnt - 1; i >= 0; i--)
{
if ((data >> i) & 1)
{
digitalWrite(data_pin, HIGH);
}
else
{
digitalWrite(data_pin, LOW);
}
digitalWrite(wr_pin, LOW);
u8g_MicroDelay();
digitalWrite(wr_pin, HIGH);
u8g_MicroDelay();
}
// Send an extra bit
if (extra)
{
digitalWrite(data_pin, HIGH);
digitalWrite(wr_pin, LOW);
u8g_MicroDelay();
digitalWrite(wr_pin, HIGH);
u8g_MicroDelay();
}
}
void ht1632_write_data(u8g_t *u8g, uint8_t cnt, uint8_t data)
{
uint8_t i;
uint8_t data_pin = u8g->pin_list[U8G_PI_MOSI];
uint8_t wr_pin = u8g->pin_list[U8G_PI_SCK];
for (i = 0; i < cnt; i++)
{
if ((data >> i) & 1) {
digitalWrite(data_pin, HIGH);
}
else {
digitalWrite(data_pin, LOW);
}
digitalWrite(wr_pin, LOW);
u8g_MicroDelay();
digitalWrite(wr_pin, HIGH);
u8g_MicroDelay();
}
}
void ht1632_init(u8g_t *u8g)
{
//uint8_t i;
uint8_t data_pin = u8g->pin_list[U8G_PI_MOSI];
uint8_t wr_pin = u8g->pin_list[U8G_PI_SCK];
uint8_t cs_pin = u8g->pin_list[U8G_PI_CS];
pinMode(data_pin, OUTPUT);
pinMode(wr_pin, OUTPUT);
pinMode(cs_pin, OUTPUT);
digitalWrite(data_pin, HIGH);
digitalWrite(wr_pin, HIGH);
digitalWrite(cs_pin, HIGH);
digitalWrite(cs_pin, LOW);
/* init display once after startup */
ht1632_write_data_MSB(u8g, 3, HT1632_ID_CMD, false); // IDs are 3 bits
ht1632_write_data_MSB(u8g, 8, HT1632_CMD_SYSDIS, true); // 8 bits
ht1632_write_data_MSB(u8g, 8, HT1632_CMD_SYSON, true); // 8 bits
ht1632_write_data_MSB(u8g, 8, HT1632_CMD_COMS11, true); // 8 bits
ht1632_write_data_MSB(u8g, 8, HT1632_CMD_LEDON, true); // 8 bits
ht1632_write_data_MSB(u8g, 8, HT1632_CMD_BLOFF, true); // 8 bits
ht1632_write_data_MSB(u8g, 8, HT1632_CMD_PWM+15, true); // 8 bits
digitalWrite(cs_pin, HIGH);
/* removed following (debug) code */
/*
digitalWrite(cs_pin, LOW);
ht1632_write_data_MSB(u8g, 3, HT1632_ID_WR, false); // Send "write to display" command
ht1632_write_data_MSB(u8g, 7, 0, false);
for(i = 0; i<48; ++i)
{
ht1632_write_data(u8g, 8, 0xFF);
}
digitalWrite(cs_pin, HIGH);
*/
}
/*
page: 0=data contain lines 0..16, 1=data contain lines 16..32 (a 24x16 display will only have page 0)
cnt: width of the display
data: pointer to a buffer with 2*cnt bytes.
*/
void ht1632_transfer_data(u8g_t *u8g, uint8_t page, uint8_t cnt, uint8_t *data)
{
uint8_t addr;
uint8_t cs_pin = u8g->pin_list[U8G_PI_CS];
/* send data to the ht1632 */
digitalWrite(cs_pin, LOW);
ht1632_write_data_MSB(u8g, 3, HT1632_ID_WR, false); // Send "write to display" command
ht1632_write_data_MSB(u8g, 7, page*2*cnt, false);
// Operating in progressive addressing mode
for (addr = 0; addr < cnt; addr++)
{
ht1632_write_data(u8g, 8, data[addr]);
ht1632_write_data(u8g, 8, data[addr+cnt]);
}
digitalWrite(cs_pin, HIGH);
}
/* value is between 0...15 */
void ht1632_set_contrast(u8g_t *u8g, uint8_t value)
{
uint8_t cs_pin = u8g->pin_list[U8G_PI_CS];
digitalWrite(cs_pin, LOW);
ht1632_write_data_MSB(u8g, 3, HT1632_ID_CMD, false);
ht1632_write_data_MSB(u8g, 8, HT1632_CMD_PWM + value, false);
digitalWrite(cs_pin, HIGH);
}
#else
void ht1632_init(u8g_t *u8g)
{
}
void ht1632_transfer_data(u8g_t *u8g, uint8_t page, uint8_t cnt, uint8_t *data)
{
}
void ht1632_set_contrast(u8g_t *u8g, uint8_t value)
{
}
#endif /* ARDUINO */
uint8_t u8g_dev_ht1632_24x16_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
ht1632_init(u8g);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
/* current page: pb->p.page */
/* ptr to the buffer: pb->buf */
ht1632_transfer_data(u8g, pb->p.page, WIDTH, pb->buf);
}
break;
case U8G_DEV_MSG_CONTRAST:
/* values passed to SetContrast() are between 0 and 255, scale down to 0...15 */
ht1632_set_contrast(u8g, (*(uint8_t *)arg) >> 4);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_ht1632_24x16_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_ht1632_24x16_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ht1632_24x16_buf};
u8g_dev_t u8g_dev_ht1632_24x16 = { u8g_dev_ht1632_24x16_fn, &u8g_dev_ht1632_24x16_pb, u8g_com_null_fn };

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ili9325d_320x240.c
View File

@ -272,7 +272,7 @@ uint8_t u8g_dev_ili9325d_320x240_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_50NS);
//for(;;)
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ili9325d_320x240_init_seq);

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ks0108_128x64.c
View File

@ -73,7 +73,7 @@ uint8_t u8g_dev_ks0108_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ks0108_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_lc7981_160x80.c
View File

@ -98,7 +98,7 @@ uint8_t u8g_dev_lc7981_160x80_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_160x80_init_seq);
break;
case U8G_DEV_MSG_STOP:

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_lc7981_240x128.c
View File

@ -96,7 +96,7 @@ uint8_t u8g_dev_lc7981_240x128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_240x128_init_seq);
break;
case U8G_DEV_MSG_STOP:

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_lc7981_240x64.c
View File

@ -96,7 +96,7 @@ uint8_t u8g_dev_lc7981_240x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_240x64_init_seq);
break;
case U8G_DEV_MSG_STOP:

8
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_lc7981_320x64.c
View File

@ -40,7 +40,12 @@
#include "u8g.h"
#ifdef U8G_16BIT
#define WIDTH 320
#else
#define WIDTH 240
#endif
#define HEIGHT 64
#define PAGE_HEIGHT 8
@ -98,7 +103,7 @@ uint8_t u8g_dev_lc7981_320x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_lc7981_320x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -143,3 +148,4 @@ uint8_t u8g_dev_lc7981_320x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
}
U8G_PB_DEV(u8g_dev_lc7981_320x64_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_lc7981_320x64_fn, U8G_COM_FAST_PARALLEL);

232
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ld7032_60x32.c Normal file
View File

@ -0,0 +1,232 @@
/*
u8g_dev_ld7032_60x32.c
60x32 OLED display
Universal 8bit Graphics Library
Copyright (c) 2011, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8g.h"
/* define width as 64, so that it is a multiple of 8 */
#define WIDTH 64
#define HEIGHT 32
#define PAGE_HEIGHT 8
static const uint8_t u8g_dev_ld7032_60x32_init_seq[] PROGMEM = {
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_DLY(1), /* delay 1 ms */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
U8G_ESC_ADR(0), /* instruction mode */
0x002, /* Dot Matrix Display ON/OFF */
U8G_ESC_ADR(1), /* data mode */
0x001, /* ON */
U8G_ESC_ADR(0), /* instruction mode */
0x014, /* Dot Matrix Display Stand-by ON/OFF */
U8G_ESC_ADR(1), /* data mode */
0x000, /* ON */
U8G_ESC_ADR(0), /* instruction mode */
0x01a, /* Dot Matrix Frame Rate */
U8G_ESC_ADR(1), /* data mode */
0x004, /* special value for this OLED from manual */
U8G_ESC_ADR(0), /* instruction mode */
0x01d, /* Graphics Memory Writing Direction */
U8G_ESC_ADR(1), /* data mode */
0x000, /* reset default (right down, horizontal) */
U8G_ESC_ADR(0), /* instruction mode */
0x009, /* Display Direction */
U8G_ESC_ADR(1), /* data mode */
0x000, /* reset default (x,y: min --> max) */
U8G_ESC_ADR(0), /* instruction mode */
0x030, /* Display Size X */
U8G_ESC_ADR(1), /* data mode */
0x000, /* Column Start Output */
0x03b, /* Column End Output */
U8G_ESC_ADR(0), /* instruction mode */
0x032, /* Display Size Y */
U8G_ESC_ADR(1), /* data mode */
0x000, /* Row Start Output */
0x01f, /* Row End Output */
U8G_ESC_ADR(0), /* instruction mode */
0x010, /* Peak Pulse Width Set */
U8G_ESC_ADR(1), /* data mode */
0x000, /* 0 SCLK */
U8G_ESC_ADR(0), /* instruction mode */
0x016, /* Peak Pulse Delay Set */
U8G_ESC_ADR(1), /* data mode */
0x000, /* 0 SCLK */
U8G_ESC_ADR(0), /* instruction mode */
0x012, /* Dot Matrix Current Level Set */
U8G_ESC_ADR(1), /* data mode */
0x050, /* 0x050 * 1 uA = 80 uA */
U8G_ESC_ADR(0), /* instruction mode */
0x018, /* Pre-Charge Pulse Width */
U8G_ESC_ADR(1), /* data mode */
0x003, /* 3 SCLK */
U8G_ESC_ADR(0), /* instruction mode */
0x044, /* Pre-Charge Mode */
U8G_ESC_ADR(1), /* data mode */
0x002, /* Every Time */
U8G_ESC_ADR(0), /* instruction mode */
0x048, /* Row overlap timing */
U8G_ESC_ADR(1), /* data mode */
0x003, /* Pre-Charge + Peak Delay + Peak boot Timing */
U8G_ESC_ADR(0), /* instruction mode */
0x03f, /* VCC_R_SEL */
U8G_ESC_ADR(1), /* data mode */
0x011, /* ??? */
U8G_ESC_ADR(0), /* instruction mode */
0x03d, /* VSS selection */
U8G_ESC_ADR(1), /* data mode */
0x000, /* 2.8V */
U8G_ESC_ADR(0), /* instruction mode */
0x002, /* Dot Matrix Display ON/OFF */
U8G_ESC_ADR(1), /* data mode */
0x001, /* ON */
U8G_ESC_ADR(0), /* instruction mode */
0x008, /* write data */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
/* use box commands to set start adr */
static const uint8_t u8g_dev_ld7032_60x32_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
U8G_ESC_ADR(0), /* instruction mode */
0x034, /* box x start */
U8G_ESC_ADR(1), /* data mode */
0x000, /* 0 */
U8G_ESC_ADR(0), /* instruction mode */
0x035, /* box x end */
U8G_ESC_ADR(1), /* data mode */
0x007, /* */
U8G_ESC_ADR(0), /* instruction mode */
0x037, /* box y end */
U8G_ESC_ADR(1), /* data mode */
0x01f, /* */
U8G_ESC_ADR(0), /* instruction mode */
0x036, /* box y start */
U8G_ESC_ADR(1), /* data mode */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_ld7032_60x32_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
/* ... */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_ld7032_60x32_sleep_off[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
/* ... */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_ld7032_60x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_data_start);
u8g_WriteByte(u8g, dev, pb->p.page_y0); /* y start */
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x008);
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_sleep_off);
return 1;
}
return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_ld7032_60x32_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ld7032_60x32_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ld7032_60x32_parallel, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_PARALLEL);
U8G_PB_DEV(u8g_dev_ld7032_60x32_hw_usart_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_HW_USART_SPI);

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_null.c
View File

@ -58,7 +58,7 @@ uint8_t u8g_dev_null(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
#endif
case U8G_DEV_MSG_GET_PAGE_BOX:
break;
case U8G_DEV_MSG_SET_COLOR_INDEX:
case U8G_DEV_MSG_SET_COLOR_ENTRY:
break;
case U8G_DEV_MSG_SET_XY_CB:
break;

33
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_pcd8544_84x48.c
View File

@ -69,12 +69,36 @@ static const uint8_t u8g_dev_pcd8544_init_seq[] PROGMEM = {
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_pcd8544_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x020, /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
0x00c, /* display on, normal */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_pcd8544_sleep_off[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x020, /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
0x008, /* display blank */
0x024, /* power down (PD=1), horizontal increment (V=0), enter normal command set (H=0) */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_pcd8544_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_pcd8544_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -101,10 +125,17 @@ uint8_t u8g_dev_pcd8544_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
u8g_WriteByte(u8g, dev, 0x080 | ( (*(uint8_t *)arg) >> 1 ) );
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_pcd8544_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_pcd8544_sleep_off);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_pcd8544_84x48_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_pcd8544_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_pcd8544_84x48_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_pcd8544_fn, U8G_COM_HW_SPI);

17
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_pcf8812_96x65.c
View File

@ -88,7 +88,7 @@ uint8_t u8g_dev_pcf8812_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_pcf8812_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -104,6 +104,20 @@ uint8_t u8g_dev_pcf8812_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
/* mirrored output, not tested*/
/*
{
uint8_t i = pb->width;
while( i > 0 )
{
i--;
u8g_WriteByte(u8g, dev, ((unsigned char *)pb->buf)[i] );
}
}
*/
u8g_SetChipSelect(u8g, dev, 0);
}
break;
@ -121,3 +135,4 @@ uint8_t u8g_dev_pcf8812_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
/* u8g_com_arduino_sw_spi_fn does not work, too fast??? */
U8G_PB_DEV(u8g_dev_pcf8812_96x65_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_pcf8812_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_pcf8812_96x65_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_pcf8812_fn, U8G_COM_HW_SPI);

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_sbn1661_122x32.c
View File

@ -70,7 +70,7 @@ uint8_t u8g_dev_sbn1661_122x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_sbn1661_122x32_init_seq);
break;
case U8G_DEV_MSG_STOP:

52
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1306_128x32.c
View File

@ -123,7 +123,7 @@ static const uint8_t u8g_dev_ssd1306_128x32_adafruit3_init_seq[] PROGMEM = {
0x0ae, /* display off, sleep mode */
0x0d5, 0x080, /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
0x0a8, 0x01f, /* Feb 23, 2013: 128x32 OLED: 0x01f, 128x64 OLED 0x03f */
0x0a8, 0x01f, /* Feb 23, 2013: 128x32 OLED: 0x01f, 128x32 OLED 0x03f */
0x0d3, 0x000, /* */
@ -131,7 +131,7 @@ static const uint8_t u8g_dev_ssd1306_128x32_adafruit3_init_seq[] PROGMEM = {
0x08d, 0x014, /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
0x020, 0x002, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5), Feb 23, 2013: 128x32 OLED: 0x002, 128x64 OLED 0x012 */
0x020, 0x002, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5), Feb 23, 2013: 128x32 OLED: 0x002, 128x32 OLED 0x012 */
0x0a1, /* segment remap a0/a1*/
0x0c8, /* c0: scan dir normal, c8: reverse */
0x0da, 0x002, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
@ -196,7 +196,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -205,7 +205,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -214,7 +214,7 @@ uint8_t u8g_dev_ssd1306_128x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -241,7 +241,49 @@ uint8_t u8g_dev_ssd1306_128x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_ssd1306_128x32_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_ssd1306_128x32_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1306_128x32_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1306_128x32_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SSD_I2C);
uint8_t u8g_dev_ssd1306_128x32_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_ssd1306_128x32_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1306_128x32_2x_buf};
u8g_dev_t u8g_dev_ssd1306_128x32_2x_sw_spi = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1306_128x32_2x_hw_spi = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_ssd1306_128x32_2x_i2c = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_SSD_I2C };

183
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1306_128x64.c
View File

@ -172,7 +172,10 @@ static const uint8_t u8g_dev_ssd1306_128x64_univision_init_seq[] PROGMEM = {
/* select one init sequence here */
//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_univision_init_seq
//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit1_init_seq
// 26. Apr 2014: in this thead: http://forum.arduino.cc/index.php?topic=234930.msg1696754;topicseen#msg1696754
// it is mentiond, that adafruit2_init_seq works better --> this will be used by the ssd1306_adafruit device
//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit2_init_seq
#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit3_init_seq
@ -180,7 +183,16 @@ static const uint8_t u8g_dev_ssd1306_128x64_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 */
0x000, /* set lower 4 bit of the col adr to 4 */
0x000, /* set lower 4 bit of the col adr to 0 */
U8G_ESC_END /* end of sequence */
};
/* the sh1106 is compatible to the ssd1306, but is 132x64. display seems to be centered */
static const uint8_t u8g_dev_sh1106_128x64_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 */
0x002, /* set lower 4 bit of the col adr to 2 (centered display with sh1106) */
U8G_ESC_END /* end of sequence */
};
@ -188,7 +200,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -197,7 +209,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -206,7 +218,38 @@ uint8_t u8g_dev_ssd1306_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_adafruit2_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_ssd1306_adafruit_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -232,6 +275,138 @@ uint8_t u8g_dev_ssd1306_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_sh1106_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_sh1106_128x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_ssd1306_128x64_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_sh1106_128x64_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_sh1106_128x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_sh1106_128x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); /* select current page (SSD1306) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_ssd1306_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1306_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1306_128x64_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_SSD_I2C);
U8G_PB_DEV(u8g_dev_ssd1306_adafruit_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_adafruit_128x64_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1306_adafruit_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_adafruit_128x64_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1306_adafruit_128x64_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_adafruit_128x64_fn, U8G_COM_SSD_I2C);
uint8_t u8g_dev_ssd1306_128x64_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_ssd1306_128x64_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1306_128x64_2x_buf};
u8g_dev_t u8g_dev_ssd1306_128x64_2x_sw_spi = { u8g_dev_ssd1306_128x64_2x_fn, &u8g_dev_ssd1306_128x64_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1306_128x64_2x_hw_spi = { u8g_dev_ssd1306_128x64_2x_fn, &u8g_dev_ssd1306_128x64_2x_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_ssd1306_128x64_2x_i2c = { u8g_dev_ssd1306_128x64_2x_fn, &u8g_dev_ssd1306_128x64_2x_pb, U8G_COM_SSD_I2C };
U8G_PB_DEV(u8g_dev_sh1106_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_sh1106_128x64_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_sh1106_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_sh1106_128x64_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_sh1106_128x64_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_sh1106_128x64_fn, U8G_COM_SSD_I2C);
uint8_t u8g_dev_sh1106_128x64_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_sh1106_128x64_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_sh1106_128x64_2x_buf};
u8g_dev_t u8g_dev_sh1106_128x64_2x_sw_spi = { u8g_dev_sh1106_128x64_2x_fn, &u8g_dev_sh1106_128x64_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_sh1106_128x64_2x_hw_spi = { u8g_dev_sh1106_128x64_2x_fn, &u8g_dev_sh1106_128x64_2x_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_sh1106_128x64_2x_i2c = { u8g_dev_sh1106_128x64_2x_fn, &u8g_dev_sh1106_128x64_2x_pb, U8G_COM_SSD_I2C };

6
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1309_128x64.c
View File

@ -86,7 +86,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
@ -95,7 +95,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
@ -104,7 +104,7 @@ uint8_t u8g_dev_ssd1309_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1309_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:

14
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1322_nhd31oled_bw.c
View File

@ -199,7 +199,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -208,7 +208,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -218,7 +218,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_1bit_nhd_312_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -244,6 +244,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
u8g_WriteByte(u8g, dev, 0x0ff);
u8g_WriteByte(u8g, dev, 0x0ff);
#endif
u8g_MicroDelay(); // for DUE?
u8g_SetChipSelect(u8g, dev, 0);
p+=cnt;
}
@ -255,6 +256,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
u8g_WriteByte(u8g, dev, 0x081);
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
u8g_MicroDelay(); // for DUE?
u8g_SetChipSelect(u8g, dev, 0);
break;
case U8G_DEV_MSG_SLEEP_ON:
@ -273,7 +275,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_1bit_nhd_312_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -299,6 +301,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
u8g_WriteByte(u8g, dev, 0x0ff);
u8g_WriteByte(u8g, dev, 0x0ff);
#endif
u8g_MicroDelay(); // for DUE?
u8g_SetChipSelect(u8g, dev, 0);
p+=cnt;
}
@ -307,7 +310,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, 0x0c1); /* 21 May 2013, fixed contrast command */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
u8g_SetChipSelect(u8g, dev, 0);
@ -325,6 +328,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_bw_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_bw_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_bw_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_bw_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_bw_parallel , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_bw_fn, U8G_COM_FAST_PARALLEL);
#define DWIDTH (WIDTH*2)
uint8_t u8g_dev_ssd1322_nhd31oled_2x_bw_buf[DWIDTH] U8G_NOCOMMON ;

23
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1322_nhd31oled_gr.c
View File

@ -50,7 +50,7 @@
#define WIDTH 248
#endif
#define HEIGHT 64
#define PAGE_HEIGHT 8
//#define PAGE_HEIGHT 8
/*
http://www.newhavendisplay.com/app_notes/OLED_25664.txt
@ -199,7 +199,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -208,7 +208,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -217,7 +217,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_2bit_nhd_312_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -243,6 +243,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
u8g_WriteByte(u8g, dev, 0x00);
u8g_WriteByte(u8g, dev, 0x00);
#endif
u8g_MicroDelay(); // for DUE?
u8g_SetChipSelect(u8g, dev, 0);
p+=cnt;
}
@ -254,6 +255,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
u8g_WriteByte(u8g, dev, 0x081);
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
u8g_MicroDelay(); // for DUE?
u8g_SetChipSelect(u8g, dev, 0);
break;
case U8G_DEV_MSG_SLEEP_ON:
@ -272,7 +274,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1322_2bit_nhd_312_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -284,7 +286,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
uint8_t *p = pb->buf;
u8g_uint_t cnt;
cnt = pb->width;
cnt >>= 3;
cnt >>= 2; /* 23 Oct 2013, changed to 2 */
for( i = 0; i < pb->p.page_height; i++ )
{
@ -298,6 +300,7 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
u8g_WriteByte(u8g, dev, 0x00);
u8g_WriteByte(u8g, dev, 0x00);
#endif
u8g_MicroDelay(); // for DUE?
u8g_SetChipSelect(u8g, dev, 0);
p+=cnt;
}
@ -322,12 +325,14 @@ uint8_t u8g_dev_ssd1322_nhd31oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
}
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_gr_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_gr_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_gr_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1322_nhd31oled_gr_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_gr_sw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1322_nhd31oled_gr_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_gr_hw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1322_nhd31oled_gr_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1322_nhd31oled_gr_parallel , WIDTH, HEIGHT, 4, u8g_dev_ssd1322_nhd31oled_gr_fn, U8G_COM_FAST_PARALLEL);
#define DWIDTH (WIDTH*2)
uint8_t u8g_dev_ssd1322_nhd31oled_2x_gr_buf[DWIDTH] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_ssd1322_nhd31oled_2x_gr_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1322_nhd31oled_2x_gr_buf};
u8g_pb_t u8g_dev_ssd1322_nhd31oled_2x_gr_pb = { {8, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1322_nhd31oled_2x_gr_buf};
u8g_dev_t u8g_dev_ssd1322_nhd31oled_2x_gr_sw_spi = { u8g_dev_ssd1322_nhd31oled_2x_gr_fn, &u8g_dev_ssd1322_nhd31oled_2x_gr_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1322_nhd31oled_2x_gr_hw_spi = { u8g_dev_ssd1322_nhd31oled_2x_gr_fn, &u8g_dev_ssd1322_nhd31oled_2x_gr_pb, U8G_COM_HW_SPI };

4
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_bw.c
View File

@ -191,7 +191,7 @@ uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -219,7 +219,7 @@ uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t m
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:

8
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_bw_new.c
View File

@ -112,7 +112,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -121,7 +121,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -133,7 +133,7 @@ static uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8
//case U8G_DEV_MSG_IS_BBX_INTERSECTION:
// return u8g_pb_IsIntersection((u8g_pb_t *)(dev->dev_mem), (u8g_dev_arg_bbx_t *)arg);
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -178,7 +178,7 @@ static uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, ui
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
break;
case U8G_DEV_MSG_STOP:

4
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_gr.c
View File

@ -190,7 +190,7 @@ static uint8_t u8g_dev_ssd1325_nhd27oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -218,7 +218,7 @@ static uint8_t u8g_dev_ssd1325_nhd27oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, ui
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:

8
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1325_nhd27oled_gr_new.c
View File

@ -111,7 +111,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -120,7 +120,7 @@ static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -131,7 +131,7 @@ static uint8_t u8g_dev_ssd1325_nhd27oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -178,7 +178,7 @@ static uint8_t u8g_dev_ssd1325_nhd27oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, ui
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:

4
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1327_96x96_gr.c
View File

@ -233,7 +233,7 @@ uint8_t u8g_dev_ssd1327_96x96_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -261,7 +261,7 @@ uint8_t u8g_dev_ssd1327_96x96_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_init_seq);
break;
case U8G_DEV_MSG_STOP:

787
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_ssd1351_128x128.c Normal file
View File

@ -0,0 +1,787 @@
/*
u8g_dev_ssd1351_128x128.c
Universal 8bit Graphics Library
Copyright (c) 2013, jamjardavies@gmail.com
Copyright (c) 2013, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
History:
Initial version 20 May 2013 jamjardavies@gmail.com
indexed device 22 May 2013 olikraus@gmail.com
*/
#include "u8g.h"
#define WIDTH 128
#define HEIGHT 128
#define PAGE_HEIGHT 8
static const uint8_t u8g_dev_ssd1351_128x128_init_seq[] PROGMEM = {
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_DLY(50),
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
U8G_ESC_DLY(50),
0xfd, /* Command Lock */
U8G_ESC_ADR(1),
0x12,
U8G_ESC_ADR(0), /* instruction mode */
0xfd,
U8G_ESC_ADR(1),
0xb1, /* Command Lock */
U8G_ESC_ADR(0), /* instruction mode */
0xae, /* Set Display Off */
U8G_ESC_ADR(0), /* instruction mode */
0xb3,
U8G_ESC_ADR(1),
0xf1, /* Front Clock Div */
U8G_ESC_ADR(0), /* instruction mode */
0xca,
U8G_ESC_ADR(1),
0x7f, /* Set Multiplex Ratio */
U8G_ESC_ADR(0), /* instruction mode */
0xa0,
U8G_ESC_ADR(1),
0xb4, /* Set Colour Depth */
U8G_ESC_ADR(0), /* instruction mode */
0x15,
U8G_ESC_ADR(1),
0x00, 0x7f, /* Set Column Address */
U8G_ESC_ADR(0), /* instruction mode */
0x75,
U8G_ESC_ADR(1),
0x00, 0x7f, /* Set Row Address */
U8G_ESC_ADR(0), /* instruction mode */
0xa1,
U8G_ESC_ADR(1),
0x00, /* Set Display Start Line */
U8G_ESC_ADR(0), /* instruction mode */
0xa2,
U8G_ESC_ADR(1),
0x00, /* Set Display Offset */
U8G_ESC_ADR(0), /* instruction mode */
0xb5,
U8G_ESC_ADR(1),
0x00, /* Set GPIO */
U8G_ESC_ADR(0), /* instruction mode */
0xab,
U8G_ESC_ADR(1),
0x01, /* Set Function Selection */
U8G_ESC_ADR(0), /* instruction mode */
0xb1,
U8G_ESC_ADR(1),
0x32, /* Set Phase Length */
U8G_ESC_ADR(0), /* instruction mode */
0xb4,
U8G_ESC_ADR(1),
0xa0, 0xb5, 0x55, /* Set Segment Low Voltage */
U8G_ESC_ADR(0), /* instruction mode */
0xbb,
U8G_ESC_ADR(1),
0x17, /* Set Precharge Voltage */
U8G_ESC_ADR(0), /* instruction mode */
0xbe,
U8G_ESC_ADR(1),
0x05, /* Set VComH Voltage */
U8G_ESC_ADR(0), /* instruction mode */
0xc1,
U8G_ESC_ADR(1),
0xc8, 0x80, 0xc8, /* Set Contrast */
U8G_ESC_ADR(0), /* instruction mode */
0xc7,
U8G_ESC_ADR(1),
0x0f, /* Set Master Contrast */
U8G_ESC_ADR(0), /* instruction mode */
0xb6,
U8G_ESC_ADR(1),
0x01, /* Set Second Precharge Period */
U8G_ESC_ADR(0), /* instruction mode */
0xa6, /* Set Display Mode Reset */
U8G_ESC_ADR(0), /* instruction mode */
0xb8, /* Set CMD Grayscale Lookup */
U8G_ESC_ADR(1),
0x05,
0x06,
0x07,
0x08,
0x09,
0x0a,
0x0b,
0x0c,
0x0D,
0x0E,
0x0F,
0x10,
0x11,
0x12,
0x13,
0x14,
0x15,
0x16,
0x18,
0x1a,
0x1b,
0x1C,
0x1D,
0x1F,
0x21,
0x23,
0x25,
0x27,
0x2A,
0x2D,
0x30,
0x33,
0x36,
0x39,
0x3C,
0x3F,
0x42,
0x45,
0x48,
0x4C,
0x50,
0x54,
0x58,
0x5C,
0x60,
0x64,
0x68,
0x6C,
0x70,
0x74,
0x78,
0x7D,
0x82,
0x87,
0x8C,
0x91,
0x96,
0x9B,
0xA0,
0xA5,
0xAA,
0xAF,
0xB4,
U8G_ESC_ADR(0),
0xaf, /* Set Display On */
0x5c,
U8G_ESC_DLY(50),
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(1),
U8G_ESC_END /* end of sequence */
};
/* set gpio to high */
static const uint8_t u8g_dev_ssd1351_128x128gh_init_seq[] PROGMEM = {
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_DLY(50),
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
U8G_ESC_DLY(50),
0xfd, /* Command Lock */
U8G_ESC_ADR(1),
0x12,
U8G_ESC_ADR(0), /* instruction mode */
0xfd,
U8G_ESC_ADR(1),
0xb1, /* Command Lock */
U8G_ESC_ADR(0), /* instruction mode */
0xae, /* Set Display Off */
U8G_ESC_ADR(0), /* instruction mode */
0xb3,
U8G_ESC_ADR(1),
0xf1, /* Front Clock Div */
U8G_ESC_ADR(0), /* instruction mode */
0xca,
U8G_ESC_ADR(1),
0x7f, /* Set Multiplex Ratio */
U8G_ESC_ADR(0), /* instruction mode */
0xa0,
U8G_ESC_ADR(1),
0xb4, /* Set Colour Depth */
U8G_ESC_ADR(0), /* instruction mode */
0x15,
U8G_ESC_ADR(1),
0x00, 0x7f, /* Set Column Address */
U8G_ESC_ADR(0), /* instruction mode */
0x75,
U8G_ESC_ADR(1),
0x00, 0x7f, /* Set Row Address */
U8G_ESC_ADR(0), /* instruction mode */
0xa1,
U8G_ESC_ADR(1),
0x00, /* Set Display Start Line */
U8G_ESC_ADR(0), /* instruction mode */
0xa2,
U8G_ESC_ADR(1),
0x00, /* Set Display Offset */
U8G_ESC_ADR(0), /* instruction mode */
0xb5,
U8G_ESC_ADR(1),
0x03, /* Set GPIO to High Level */
U8G_ESC_ADR(0), /* instruction mode */
0xab,
U8G_ESC_ADR(1),
0x01, /* Set Function Selection */
U8G_ESC_ADR(0), /* instruction mode */
0xb1,
U8G_ESC_ADR(1),
0x32, /* Set Phase Length */
U8G_ESC_ADR(0), /* instruction mode */
0xb4,
U8G_ESC_ADR(1),
0xa0, 0xb5, 0x55, /* Set Segment Low Voltage */
U8G_ESC_ADR(0), /* instruction mode */
0xbb,
U8G_ESC_ADR(1),
0x17, /* Set Precharge Voltage */
U8G_ESC_ADR(0), /* instruction mode */
0xbe,
U8G_ESC_ADR(1),
0x05, /* Set VComH Voltage */
U8G_ESC_ADR(0), /* instruction mode */
0xc1,
U8G_ESC_ADR(1),
0xc8, 0x80, 0xc8, /* Set Contrast */
U8G_ESC_ADR(0), /* instruction mode */
0xc7,
U8G_ESC_ADR(1),
0x0f, /* Set Master Contrast */
U8G_ESC_ADR(0), /* instruction mode */
0xb6,
U8G_ESC_ADR(1),
0x01, /* Set Second Precharge Period */
U8G_ESC_ADR(0), /* instruction mode */
0xa6, /* Set Display Mode Reset */
U8G_ESC_ADR(0), /* instruction mode */
0xb8, /* Set CMD Grayscale Lookup */
U8G_ESC_ADR(1),
0x05,
0x06,
0x07,
0x08,
0x09,
0x0a,
0x0b,
0x0c,
0x0D,
0x0E,
0x0F,
0x10,
0x11,
0x12,
0x13,
0x14,
0x15,
0x16,
0x18,
0x1a,
0x1b,
0x1C,
0x1D,
0x1F,
0x21,
0x23,
0x25,
0x27,
0x2A,
0x2D,
0x30,
0x33,
0x36,
0x39,
0x3C,
0x3F,
0x42,
0x45,
0x48,
0x4C,
0x50,
0x54,
0x58,
0x5C,
0x60,
0x64,
0x68,
0x6C,
0x70,
0x74,
0x78,
0x7D,
0x82,
0x87,
0x8C,
0x91,
0x96,
0x9B,
0xA0,
0xA5,
0xAA,
0xAF,
0xB4,
U8G_ESC_ADR(0),
0xaf, /* Set Display On */
0x5c,
U8G_ESC_DLY(50),
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(1),
U8G_ESC_END /* end of sequence */
};
#define u8g_dev_ssd1351_128x128_init_seq u8g_dev_ssd1351_128x128_init_seq
static const uint8_t u8g_dev_ssd1351_128x128_column_seq[] PROGMEM = {
U8G_ESC_CS(1),
U8G_ESC_ADR(0), 0x15,
U8G_ESC_ADR(1), 0x00, 0x7f,
U8G_ESC_ADR(0), 0x75,
U8G_ESC_ADR(1), 0x00, 0x7f,
U8G_ESC_ADR(0), 0x5c,
U8G_ESC_ADR(1),
U8G_ESC_CS(0),
U8G_ESC_END
};
#define RGB332_STREAM_BYTES 8
static uint8_t u8g_ssd1351_stream_bytes[RGB332_STREAM_BYTES*3];
void u8g_ssd1351_to_stream(uint8_t *ptr)
{
uint8_t cnt = RGB332_STREAM_BYTES;
uint8_t val;
uint8_t *dest = u8g_ssd1351_stream_bytes;
for( cnt = 0; cnt < RGB332_STREAM_BYTES; cnt++ )
{
val = *ptr++;
*dest++ = ((val & 0xe0) >> 2);
*dest++ = ((val & 0x1c) << 1);
*dest++ = ((val & 0x03) << 4);
}
}
#ifdef OBSOLETE
// Convert the internal RGB 332 to R
static uint8_t u8g_ssd1351_get_r(uint8_t colour)
{
//return ((colour & 0xe0) >> 5) * 9;
//return ((colour & 0xe0) >> 5) * 8;
return ((colour & 0xe0) >> 2) ;
}
// Convert the internal RGB 332 to G
static uint8_t u8g_ssd1351_get_g(uint8_t colour)
{
//return ((colour & 0x1c) >> 2) * 9;
//return ((colour & 0x1c) >> 2) * 8;
return ((colour & 0x1c) << 1);
}
// Convert the internal RGB 332 to B
static uint8_t u8g_ssd1351_get_b(uint8_t colour)
{
//return (colour & 0x03) * 21;
return (colour & 0x03) * 16;
}
#endif
uint8_t u8g_dev_ssd1351_128x128_332_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
// u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_50NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_FIRST:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_column_seq);
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_uint_t x;
uint8_t page_height;
uint8_t i;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
uint8_t *ptr = pb->buf;
u8g_SetChipSelect(u8g, dev, 1);
page_height = pb->p.page_y1;
page_height -= pb->p.page_y0;
page_height++;
for( i = 0; i < page_height; i++ )
{
for (x = 0; x < pb->width; x+=RGB332_STREAM_BYTES)
{
u8g_ssd1351_to_stream(ptr);
u8g_WriteSequence(u8g, dev, RGB332_STREAM_BYTES*3, u8g_ssd1351_stream_bytes);
ptr += RGB332_STREAM_BYTES;
}
}
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_GET_MODE:
return U8G_MODE_R3G3B2;
}
return u8g_dev_pb8h8_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_ssd1351_128x128gh_332_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
// u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_50NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128gh_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_FIRST:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_column_seq);
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_uint_t x;
uint8_t page_height;
uint8_t i;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
uint8_t *ptr = pb->buf;
u8g_SetChipSelect(u8g, dev, 1);
page_height = pb->p.page_y1;
page_height -= pb->p.page_y0;
page_height++;
for( i = 0; i < page_height; i++ )
{
for (x = 0; x < pb->width; x+=RGB332_STREAM_BYTES)
{
u8g_ssd1351_to_stream(ptr);
u8g_WriteSequence(u8g, dev, RGB332_STREAM_BYTES*3, u8g_ssd1351_stream_bytes);
ptr += RGB332_STREAM_BYTES;
}
}
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_GET_MODE:
return U8G_MODE_R3G3B2;
}
return u8g_dev_pb8h8_base_fn(u8g, dev, msg, arg);
}
static uint8_t u8g_dev_ssd1351_128x128_r[256];
static uint8_t u8g_dev_ssd1351_128x128_g[256];
static uint8_t u8g_dev_ssd1351_128x128_b[256];
uint8_t u8g_dev_ssd1351_128x128_idx_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
// u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_50NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_SET_COLOR_ENTRY:
u8g_dev_ssd1351_128x128_r[ ((u8g_dev_arg_irgb_t *)arg)->idx ] = ((u8g_dev_arg_irgb_t *)arg)->r;
u8g_dev_ssd1351_128x128_g[ ((u8g_dev_arg_irgb_t *)arg)->idx ] = ((u8g_dev_arg_irgb_t *)arg)->g;
u8g_dev_ssd1351_128x128_b[ ((u8g_dev_arg_irgb_t *)arg)->idx ] = ((u8g_dev_arg_irgb_t *)arg)->b;
break;
case U8G_DEV_MSG_PAGE_FIRST:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_column_seq);
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
int x;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
uint8_t *ptr = pb->buf;
u8g_SetChipSelect(u8g, dev, 1);
for (x = 0; x < pb->width; x++)
{
u8g_WriteByte(u8g, dev, u8g_dev_ssd1351_128x128_r[(*ptr)>>2]);
u8g_WriteByte(u8g, dev, u8g_dev_ssd1351_128x128_g[(*ptr)>>2]);
u8g_WriteByte(u8g, dev, u8g_dev_ssd1351_128x128_b[(*ptr)>>2]);
ptr++;
}
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_GET_MODE:
return U8G_MODE_INDEX;
}
return u8g_dev_pb8h8_base_fn(u8g, dev, msg, arg);
}
void u8g_ssd1351_hicolor_to_stream(uint8_t *ptr)
{
register uint8_t cnt = RGB332_STREAM_BYTES;
register uint8_t low, high, r, g, b;
uint8_t *dest = u8g_ssd1351_stream_bytes;
for( cnt = 0; cnt < RGB332_STREAM_BYTES; cnt++ )
{
low = *ptr++;
high = *ptr++;
r = high & ~7;
r >>= 2;
b = low & 31;
b <<= 1;
g = high & 7;
g <<= 3;
g |= (low>>5)&7;
*dest++ = r;
*dest++ = g;
*dest++ = b;
}
}
uint8_t u8g_dev_ssd1351_128x128_hicolor_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_50NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_FIRST:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_column_seq);
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
uint8_t i, j;
uint8_t page_height;
uint8_t *ptr = pb->buf;
u8g_SetChipSelect(u8g, dev, 1);
page_height = pb->p.page_y1;
page_height -= pb->p.page_y0;
page_height++;
for( j = 0; j < page_height; j++ )
{
for (i = 0; i < pb->width; i+=RGB332_STREAM_BYTES)
{
u8g_ssd1351_hicolor_to_stream(ptr);
u8g_WriteSequence(u8g, dev, RGB332_STREAM_BYTES*3, u8g_ssd1351_stream_bytes);
ptr += RGB332_STREAM_BYTES*2;
}
}
u8g_SetChipSelect(u8g, dev, 0);
}
break; /* continue to base fn */
case U8G_DEV_MSG_GET_MODE:
return U8G_MODE_HICOLOR;
}
return u8g_dev_pbxh16_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_ssd1351_128x128gh_hicolor_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_50NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128gh_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_FIRST:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1351_128x128_column_seq);
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
uint8_t i, j;
uint8_t page_height;
uint8_t *ptr = pb->buf;
u8g_SetChipSelect(u8g, dev, 1);
page_height = pb->p.page_y1;
page_height -= pb->p.page_y0;
page_height++;
for( j = 0; j < page_height; j++ )
{
for (i = 0; i < pb->width; i+=RGB332_STREAM_BYTES)
{
u8g_ssd1351_hicolor_to_stream(ptr);
u8g_WriteSequence(u8g, dev, RGB332_STREAM_BYTES*3, u8g_ssd1351_stream_bytes);
ptr += RGB332_STREAM_BYTES*2;
}
}
u8g_SetChipSelect(u8g, dev, 0);
}
break; /* continue to base fn */
case U8G_DEV_MSG_GET_MODE:
return U8G_MODE_HICOLOR;
}
return u8g_dev_pbxh16_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_ssd1351_128x128_byte_buf[WIDTH*PAGE_HEIGHT] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_ssd1351_128x128_byte_pb = { {PAGE_HEIGHT, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1351_128x128_byte_buf};
u8g_dev_t u8g_dev_ssd1351_128x128_332_sw_spi = { u8g_dev_ssd1351_128x128_332_fn, &u8g_dev_ssd1351_128x128_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128_332_hw_spi = { u8g_dev_ssd1351_128x128_332_fn, &u8g_dev_ssd1351_128x128_byte_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_332_sw_spi = { u8g_dev_ssd1351_128x128gh_332_fn, &u8g_dev_ssd1351_128x128_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_332_hw_spi = { u8g_dev_ssd1351_128x128gh_332_fn, &u8g_dev_ssd1351_128x128_byte_pb, U8G_COM_HW_SPI };
//u8g_dev_t u8g_dev_ssd1351_128x128_idx_sw_spi = { u8g_dev_ssd1351_128x128_idx_fn, &u8g_dev_ssd1351_128x128_byte_pb, U8G_COM_SW_SPI };
//u8g_dev_t u8g_dev_ssd1351_128x128_idx_hw_spi = { u8g_dev_ssd1351_128x128_idx_fn, &u8g_dev_ssd1351_128x128_byte_pb, U8G_COM_HW_SPI };
/* only half of the height, because two bytes are needed for one pixel */
u8g_pb_t u8g_dev_ssd1351_128x128_hicolor_byte_pb = { {PAGE_HEIGHT/2, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1351_128x128_byte_buf};
u8g_dev_t u8g_dev_ssd1351_128x128_hicolor_sw_spi = { u8g_dev_ssd1351_128x128_hicolor_fn, &u8g_dev_ssd1351_128x128_hicolor_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128_hicolor_hw_spi = { u8g_dev_ssd1351_128x128_hicolor_fn, &u8g_dev_ssd1351_128x128_hicolor_byte_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_hicolor_sw_spi = { u8g_dev_ssd1351_128x128gh_hicolor_fn, &u8g_dev_ssd1351_128x128_hicolor_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_hicolor_hw_spi = { u8g_dev_ssd1351_128x128gh_hicolor_fn, &u8g_dev_ssd1351_128x128_hicolor_byte_pb, U8G_COM_HW_SPI };
uint8_t u8g_dev_ssd1351_128x128_4x_byte_buf[WIDTH*PAGE_HEIGHT*4] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_ssd1351_128x128_4x_332_byte_pb = { {PAGE_HEIGHT*4, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1351_128x128_4x_byte_buf};
u8g_dev_t u8g_dev_ssd1351_128x128_4x_332_sw_spi = { u8g_dev_ssd1351_128x128_332_fn, &u8g_dev_ssd1351_128x128_4x_332_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128_4x_332_hw_spi = { u8g_dev_ssd1351_128x128_332_fn, &u8g_dev_ssd1351_128x128_4x_332_byte_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_4x_332_sw_spi = { u8g_dev_ssd1351_128x128gh_332_fn, &u8g_dev_ssd1351_128x128_4x_332_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_4x_332_hw_spi = { u8g_dev_ssd1351_128x128gh_332_fn, &u8g_dev_ssd1351_128x128_4x_332_byte_pb, U8G_COM_HW_SPI };
u8g_pb_t u8g_dev_ssd1351_128x128_4x_hicolor_byte_pb = { {PAGE_HEIGHT/2*4, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1351_128x128_4x_byte_buf};
u8g_dev_t u8g_dev_ssd1351_128x128_4x_hicolor_sw_spi = { u8g_dev_ssd1351_128x128_hicolor_fn, &u8g_dev_ssd1351_128x128_4x_hicolor_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128_4x_hicolor_hw_spi = { u8g_dev_ssd1351_128x128_hicolor_fn, &u8g_dev_ssd1351_128x128_4x_hicolor_byte_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_4x_hicolor_sw_spi = { u8g_dev_ssd1351_128x128gh_hicolor_fn, &u8g_dev_ssd1351_128x128_4x_hicolor_byte_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1351_128x128gh_4x_hicolor_hw_spi = { u8g_dev_ssd1351_128x128gh_hicolor_fn, &u8g_dev_ssd1351_128x128_4x_hicolor_byte_pb, U8G_COM_HW_SPI };
/*
U8G_PB_DEV(u8g_dev_ssd1351_128x128_332_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1351_128x128_332_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1351_128x128_332_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1351_128x128_332_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1351_128x128_idx_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1351_128x128_idx_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1351_128x128_idx_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1351_128x128_idx_fn, U8G_COM_HW_SPI);
*/

56
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7565_64128n.c
View File

@ -96,7 +96,7 @@ static const uint8_t u8g_dev_st7565_64128n_sleep_on[] PROGMEM = {
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -106,7 +106,7 @@ static const uint8_t u8g_dev_st7565_64128n_sleep_off[] PROGMEM = {
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -115,7 +115,7 @@ uint8_t u8g_dev_st7565_64128n_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -148,6 +148,56 @@ uint8_t u8g_dev_st7565_64128n_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_st7565_64128n_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_st7565_64128n_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_st7565_64128n_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_st7565_64128n_parallel, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_fn, U8G_COM_PARALLEL);
uint8_t u8g_dev_st7565_64128n_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_st7565_64128n_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_64128n_2x_buf};
u8g_dev_t u8g_dev_st7565_64128n_2x_sw_spi = { u8g_dev_st7565_64128n_2x_fn, &u8g_dev_st7565_64128n_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_st7565_64128n_2x_hw_spi = { u8g_dev_st7565_64128n_2x_fn, &u8g_dev_st7565_64128n_2x_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_st7565_64128n_2x_hw_parallel = { u8g_dev_st7565_64128n_2x_fn, &u8g_dev_st7565_64128n_2x_pb, U8G_COM_PARALLEL };

56
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7565_dogm128.c
View File

@ -82,7 +82,7 @@ static const uint8_t u8g_dev_st7565_dogm128_sleep_on[] PROGMEM = {
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -92,7 +92,7 @@ static const uint8_t u8g_dev_st7565_dogm128_sleep_off[] PROGMEM = {
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -101,7 +101,7 @@ uint8_t u8g_dev_st7565_dogm128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -134,7 +134,57 @@ uint8_t u8g_dev_st7565_dogm128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_st7565_dogm128_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm128_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_st7565_dogm128_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_dogm128_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_st7565_dogm128_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_dogm128_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_st7565_dogm128_parallel, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_dogm128_fn, U8G_COM_PARALLEL);
uint8_t u8g_dev_st7565_dogm128_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_st7565_dogm128_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_dogm128_2x_buf};
u8g_dev_t u8g_dev_st7565_dogm128_2x_sw_spi = { u8g_dev_st7565_dogm128_2x_fn, &u8g_dev_st7565_dogm128_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_st7565_dogm128_2x_hw_spi = { u8g_dev_st7565_dogm128_2x_fn, &u8g_dev_st7565_dogm128_2x_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_st7565_dogm128_2x_parallel = { u8g_dev_st7565_dogm128_2x_fn, &u8g_dev_st7565_dogm128_2x_pb, U8G_COM_PARALLEL };

6
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7565_dogm132.c
View File

@ -101,7 +101,7 @@ static const uint8_t u8g_dev_st7565_dogm132_sleep_on[] PROGMEM = {
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -111,7 +111,7 @@ static const uint8_t u8g_dev_st7565_dogm132_sleep_off[] PROGMEM = {
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -120,7 +120,7 @@ uint8_t u8g_dev_st7565_dogm132_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_dogm132_init_seq);
break;
case U8G_DEV_MSG_STOP:

54
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7565_lm6059.c
View File

@ -98,7 +98,7 @@ static const uint8_t u8g_dev_st7565_lm6059_sleep_on[] PROGMEM = {
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -108,7 +108,7 @@ static const uint8_t u8g_dev_st7565_lm6059_sleep_off[] PROGMEM = {
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -118,7 +118,7 @@ uint8_t u8g_dev_st7565_lm6059_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -151,7 +151,55 @@ uint8_t u8g_dev_st7565_lm6059_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_st7565_lm6059_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_st7565_lm6059_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6059_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_st7565_lm6059_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6059_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_st7565_lm6059_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_st7565_lm6059_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_lm6059_2x_buf};
u8g_dev_t u8g_dev_st7565_lm6059_2x_sw_spi = { u8g_dev_st7565_lm6059_2x_fn, &u8g_dev_st7565_lm6059_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_st7565_lm6059_2x_hw_spi = { u8g_dev_st7565_lm6059_2x_fn, &u8g_dev_st7565_lm6059_2x_pb, U8G_COM_HW_SPI };

54
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7565_lm6063.c
View File

@ -129,7 +129,7 @@ static const uint8_t u8g_dev_st7565_st7565_sleep_on[] PROGMEM = {
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -139,7 +139,7 @@ static const uint8_t u8g_dev_st7565_st7565_sleep_off[] PROGMEM = {
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -149,7 +149,7 @@ uint8_t u8g_dev_st7565_lm6063_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -182,7 +182,55 @@ uint8_t u8g_dev_st7565_lm6063_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_st7565_lm6063_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_st7565_lm6063_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6063_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_st7565_lm6063_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6063_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_st7565_lm6063_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_st7565_lm6063_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_lm6063_2x_buf};
u8g_dev_t u8g_dev_st7565_lm6063_2x_sw_spi = { u8g_dev_st7565_lm6063_2x_fn, &u8g_dev_st7565_lm6063_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_st7565_lm6063_2x_hw_spi = { u8g_dev_st7565_lm6063_2x_fn, &u8g_dev_st7565_lm6063_2x_pb, U8G_COM_HW_SPI };

8
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7565_nhd_c12832.c
View File

@ -86,7 +86,7 @@ static const uint8_t u8g_dev_st7565_c12832_sleep_on[] PROGMEM = {
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -96,7 +96,7 @@ static const uint8_t u8g_dev_st7565_c12832_sleep_off[] PROGMEM = {
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -105,7 +105,7 @@ uint8_t u8g_dev_st7565_c12832_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12832_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -141,3 +141,5 @@ uint8_t u8g_dev_st7565_c12832_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
U8G_PB_DEV(u8g_dev_st7565_nhd_c12832_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_c12832_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_st7565_nhd_c12832_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_c12832_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_st7565_nhd_c12832_parallel, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_c12832_fn, U8G_COM_PARALLEL);
U8G_PB_DEV(u8g_dev_st7565_nhd_c12832_hw_usart_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_c12832_fn, U8G_COM_HW_USART_SPI);

55
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7565_nhd_c12864.c
View File

@ -87,7 +87,7 @@ static const uint8_t u8g_dev_st7565_c12864_sleep_on[] PROGMEM = {
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -97,7 +97,7 @@ static const uint8_t u8g_dev_st7565_c12864_sleep_off[] PROGMEM = {
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
@ -106,7 +106,7 @@ uint8_t u8g_dev_st7565_nhd_c12864_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_nhd_c12864_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -139,7 +139,56 @@ uint8_t u8g_dev_st7565_nhd_c12864_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_st7565_nhd_c12864_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_nhd_c12864_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_nhd_c12864_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_nhd_c12864_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12864_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_c12864_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_st7565_nhd_c12864_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_nhd_c12864_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_st7565_nhd_c12864_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_nhd_c12864_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_st7565_nhd_c12864_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_st7565_nhd_c12864_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_nhd_c12864_2x_buf};
u8g_dev_t u8g_dev_st7565_nhd_c12864_2x_sw_spi = { u8g_dev_st7565_nhd_c12864_2x_fn, &u8g_dev_st7565_nhd_c12864_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_st7565_nhd_c12864_2x_hw_spi = { u8g_dev_st7565_nhd_c12864_2x_fn, &u8g_dev_st7565_nhd_c12864_2x_pb, U8G_COM_HW_SPI };

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7687_c144mvgd.c
View File

@ -363,7 +363,7 @@ uint8_t u8g_dev_st7687_c144mvgd_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7687_c144mvgd_init_seq);
break;
case U8G_DEV_MSG_STOP:

10
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7920_128x64.c
View File

@ -1,6 +1,6 @@
/*
u8g_dev_st7565_128x64.c
u8g_dev_st7920_128x64.c
Universal 8bit Graphics Library
@ -66,7 +66,7 @@ uint8_t u8g_dev_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -114,7 +114,7 @@ uint8_t u8g_dev_st7920_128x64_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -160,6 +160,9 @@ uint8_t u8g_dev_st7920_128x64_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
U8G_PB_DEV(u8g_dev_st7920_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_fn, U8G_COM_ST7920_SW_SPI);
U8G_PB_DEV(u8g_dev_st7920_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_fn, U8G_COM_ST7920_HW_SPI);
U8G_PB_DEV(u8g_dev_st7920_128x64_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_fn, U8G_COM_FAST_PARALLEL);
U8G_PB_DEV(u8g_dev_st7920_128x64_custom, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_fn, u8g_com_arduino_st7920_custom_fn);
#define QWIDTH (WIDTH*4)
uint8_t u8g_dev_st7920_128x64_4x_buf[QWIDTH] U8G_NOCOMMON ;
@ -167,5 +170,6 @@ u8g_pb_t u8g_dev_st7920_128x64_4x_pb = { {32, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_
u8g_dev_t u8g_dev_st7920_128x64_4x_sw_spi = { u8g_dev_st7920_128x64_4x_fn, &u8g_dev_st7920_128x64_4x_pb, U8G_COM_ST7920_SW_SPI };
u8g_dev_t u8g_dev_st7920_128x64_4x_hw_spi = { u8g_dev_st7920_128x64_4x_fn, &u8g_dev_st7920_128x64_4x_pb, U8G_COM_ST7920_HW_SPI };
u8g_dev_t u8g_dev_st7920_128x64_4x_8bit = { u8g_dev_st7920_128x64_4x_fn, &u8g_dev_st7920_128x64_4x_pb, U8G_COM_FAST_PARALLEL };
u8g_dev_t u8g_dev_st7920_128x64_4x_custom = { u8g_dev_st7920_128x64_4x_fn, &u8g_dev_st7920_128x64_4x_pb, u8g_com_arduino_st7920_custom_fn };

4
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7920_192x32.c
View File

@ -65,7 +65,7 @@ uint8_t u8g_dev_st7920_192x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_192x32_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -103,7 +103,7 @@ uint8_t u8g_dev_st7920_192x32_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_192x32_init_seq);
break;
case U8G_DEV_MSG_STOP:

4
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_st7920_202x32.c
View File

@ -68,7 +68,7 @@ uint8_t u8g_dev_st7920_202x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_202x32_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -106,7 +106,7 @@ uint8_t u8g_dev_st7920_202x32_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_202x32_init_seq);
break;
case U8G_DEV_MSG_STOP:

193
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_t6963_128x128.c Normal file
View File

@ -0,0 +1,193 @@
/*
u8g_dev_t6963_128x128.c
Universal 8bit Graphics Library
Copyright (c) 2013, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Application Notes for the MGLS 128x128
www.baso.no/content/pdf/T6963C_Application.pdf
Hitachi App Notes:
https://www.sparkfun.com/datasheets/LCD/Monochrome/AN-029-Toshiba_T6963C.pdf
Notes:
The font selection pins should generate the 8x8 font.
For the MGLS240128TZ only FS1 is available on pin 18.
FS1 must be low to generate the 8x8 font.
*/
#include "u8g.h"
#define WIDTH 128
#define HEIGHT 128
#define PAGE_HEIGHT 16
/*
http://www.mark-products.com/graphics.htm#240x64%20Pixel%20Format
*/
/* text is not used, so settings are not relevant */
static const uint8_t u8g_dev_t6963_128x128_init_seq[] PROGMEM = {
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* data mode */
U8G_ESC_RST(15), /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
U8G_ESC_CS(1), /* enable chip */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_ADR(0), /* data mode */
0x000, /* low byte */
0x000, /* height byte */
U8G_ESC_ADR(1), /* instruction mode */
0x021, /* set cursor position */
U8G_ESC_ADR(0), /* data mode */
0x000, /* low byte */
0x000, /* height byte */
U8G_ESC_ADR(1), /* instruction mode */
0x022, /* set offset */
U8G_ESC_ADR(0), /* data mode */
0x000, /* low byte */
0x000, /* height byte */
U8G_ESC_ADR(1), /* instruction mode */
0x040, /* text home */
U8G_ESC_ADR(0), /* data mode */
WIDTH/8, /* low byte */
0x000, /* height byte */
U8G_ESC_ADR(1), /* instruction mode */
0x041, /* text columns */
U8G_ESC_ADR(0), /* data mode */
0x000, /* low byte */
0x000, /* height byte */
U8G_ESC_ADR(1), /* instruction mode */
0x042, /* graphics home */
U8G_ESC_ADR(0), /* data mode */
WIDTH/8, /* low byte */
0x000, /* height byte */
U8G_ESC_ADR(1), /* instruction mode */
0x043, /* graphics columns */
// mode set
// 0x080: Internal CG, OR Mode
// 0x081: Internal CG, EXOR Mode
// 0x083: Internal CG, AND Mode
// 0x088: External CG, OR Mode
// 0x089: External CG, EXOR Mode
// 0x08B: External CG, AND Mode
U8G_ESC_ADR(1), /* instruction mode */
0x080, /* mode register: OR Mode, Internal Character Mode */
U8G_ESC_ADR(1), /* instruction mode */
// display mode
// 0x090: Display off
// 0x094: Graphic off, text on, cursor off, blink off
// 0x096: Graphic off, text on, cursor on, blink off
// 0x097: Graphic off, text on, cursor on, blink on
// 0x098: Graphic on, text off, cursor off, blink off
// 0x09a: Graphic on, text off, cursor on, blink off
// ...
// 0x09c: Graphic on, text on, cursor off, blink off
// 0x09f: Graphic on, text on, cursor on, blink on
0x098, /* mode register: Display Mode, Graphics on, Text off, Cursor off */
U8G_ESC_ADR(0), /* data mode */
0x000, /* low byte */
0x000, /* height byte */
U8G_ESC_ADR(1), /* instruction mode */
0x024, /* set adr pointer */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_ADR(0), /* data mode */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_t6963_128x128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_128x128_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
uint8_t y, i;
uint16_t disp_ram_adr;
uint8_t *ptr;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_SetAddress(u8g, dev, 0); /* data mode */
u8g_SetChipSelect(u8g, dev, 1);
y = pb->p.page_y0;
ptr = pb->buf;
disp_ram_adr = WIDTH/8;
disp_ram_adr *= y;
for( i = 0; i < PAGE_HEIGHT; i ++ )
{
u8g_SetAddress(u8g, dev, 0); /* data mode */
u8g_WriteByte(u8g, dev, disp_ram_adr&255 ); /* address low byte */
u8g_WriteByte(u8g, dev, disp_ram_adr>>8 ); /* address hight byte */
u8g_SetAddress(u8g, dev, 1); /* cmd mode */
u8g_WriteByte(u8g, dev, 0x024 ); /* set adr ptr */
u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
ptr += WIDTH/8;
disp_ram_adr += WIDTH/8;
}
u8g_SetAddress(u8g, dev, 0); /* data mode */
u8g_SetChipSelect(u8g, dev, 0);
}
break;
}
return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
}
// U8G_PB_DEV(u8g_dev_t6963_128x128_8bit, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_t6963_128x128_fn, U8G_COM_T6963);
uint8_t u8g_dev_t6963_128x128_2x_bw_buf[WIDTH/8*PAGE_HEIGHT] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_t6963_128x128_2x_bw_pb = { {PAGE_HEIGHT, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_t6963_128x128_2x_bw_buf};
u8g_dev_t u8g_dev_t6963_128x128_8bit = { u8g_dev_t6963_128x128_fn, &u8g_dev_t6963_128x128_2x_bw_pb, U8G_COM_T6963 };

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_t6963_128x64.c
View File

@ -142,7 +142,7 @@ uint8_t u8g_dev_t6963_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *a
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_128x64_init_seq);
break;
case U8G_DEV_MSG_STOP:

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_t6963_240x128.c
View File

@ -146,7 +146,7 @@ uint8_t u8g_dev_t6963_240x128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_240x128_init_seq);
break;
case U8G_DEV_MSG_STOP:

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_t6963_240x64.c
View File

@ -146,7 +146,7 @@ uint8_t u8g_dev_t6963_240x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *a
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_240x64_init_seq);
break;
case U8G_DEV_MSG_STOP:

2
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_tls8204_84x48.c
View File

@ -78,7 +78,7 @@ uint8_t u8g_dev_tls8204_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_tls8204_init_seq);
break;
case U8G_DEV_MSG_STOP:

201
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1601_c128032.c Normal file
View File

@ -0,0 +1,201 @@
/*
u8g_dev_uc1601_c128032.c
LCD-AG-C128032R-DIW W/KK E6 PBF from http://www.artronic.pl/o_produkcie.php?id=1343
Universal 8bit Graphics Library
Copyright (c) 2013, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8g.h"
#define WIDTH 128
#define HEIGHT 32
#define PAGE_HEIGHT 8
/* init sequence */
static const uint8_t u8g_dev_uc1601_c128032_init_seq[] PROGMEM = {
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
U8G_ESC_RST(15), /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
0x0a3, /* 0x0a3: LCD bias 1/7 , 0x0a2: LCD bias 1/9 */
0x0a0, /* 0x0a0: ADC set to normal, 0x0a1 ADC set to inverted */
0x0c8, /* common output mode: set scan direction normal operation/SHL Select, 0x0c0 --> SHL = 0, normal, 0x0c8 --> SHL = 1 */
0x0c2, /* 22 May 2013: mirror x */
0x040, /* set display start line */
0x028 | 0x04, /* power control: turn on voltage converter */
U8G_ESC_DLY(50), /* delay 50 ms */
0x028 | 0x06, /* power control: turn on voltage regulator */
U8G_ESC_DLY(50), /* delay 50 ms */
0x028 | 0x07, /* power control: turn on voltage follower */
U8G_ESC_DLY(10), /* delay 10 ms */
0x020| 0x06, /* set V0 voltage resistor ratio to 6 */
0x0af, /* display on */
//0x081, /* set contrast */
//0x018, /* contrast value*/
0x0a6, /* display normal, bit val 0: LCD pixel off. */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_uc1601_c128032_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 */
0x004, /* set lower 4 bit of the col adr */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_uc1601_c128032_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ac, /* static indicator off */
0x000, /* indicator register set (not sure if this is required) */
0x0ae, /* display off */
0x0a5, /* all points on */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_uc1601_c128032_sleep_off[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0a4, /* all points off */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_uc1601_c128032_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (UC1601) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_sleep_off);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_uc1601_c128032_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (UC1601) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (UC1601) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1601_c128032_sleep_off);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1601_c128032_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1601_c128032_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_uc1601_c128032_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1601_c128032_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_uc1601_c128032_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_uc1601_c128032_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1601_c128032_2x_buf};
u8g_dev_t u8g_dev_uc1601_c128032_2x_sw_spi = { u8g_dev_uc1601_c128032_2x_fn, &u8g_dev_uc1601_c128032_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_uc1601_c128032_2x_hw_spi = { u8g_dev_uc1601_c128032_2x_fn, &u8g_dev_uc1601_c128032_2x_pb, U8G_COM_HW_SPI };

200
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1608_240x128.c Normal file
View File

@ -0,0 +1,200 @@
/*
u8g_dev_uc1608_240x128.c
Universal 8bit Graphics Library
Copyright (c) 2013, olikraus@gmail.com (original 240x64 library)
Modified by thieringpeti@gmail.com for Raystar rx240128 family displays
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
Display: http://www.tme.eu/en/details/rx240128a-ghw/lcd-graphic-displays/raystar-optronics/
Connection: HW / SW SPI.
To get this display working, You need some extra capacitors:
connect 4.7uF caps between:
PIN1 & PIN2 VB1 +-
PIN3 & PIN4 VB0 -+
connect 0.1uF caps between:
VLCD and VSS
VBIAS and VSS
You can find some schematics with a 10M resistor parallellized with the VLCD capacitor.
Select 4-bit SPI mode.
Connect D7 (PIN9) To VDD (+3.3V)
Connect D1, D2, D4, D5, D6 to GND (PINS 10,11,12,14,15)
Connect WR0, WR1, BM0, BM1 to GND (PINS 17,18,22,23)
D0: (PIN16) AVR's SCK pin (HW SPI)
D3: (PIN13) AVR's MOSI pin (HW SPI)
CD: (PIN19) used as A0 in the library
CS: (PIN21) Connect to the defined CS pin, and You can re-use the HW SPI in different routines.
RST: (PIN20) optional reset, can be defined in the function, resets on initialization.
Adjust contrast if necessary. Default: 0x072.
*/
#include "u8g.h"
#define WIDTH 240
#define HEIGHT 128
#define PAGE_HEIGHT 8
/* see also ERC24064-1 for init sequence example */
static const uint8_t u8g_dev_uc1608_240x128_init_seq[] PROGMEM = {
U8G_ESC_CS(1), /* disable chip (UC1608 has positive logic for CS) */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (15*16)+2 milliseconds */
U8G_ESC_CS(0), /* enable chip */
0x0e2, /* soft reset */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_DLY(100), /* delay 100 ms */
0x026, /* MUX rate and temperature compensation */
0x0c8, /* Map control, Bit 3: MY=1, Bit 2: MX=0, Bit 0: MSF =0 */
0x0eb, /* LCD bias Bits 0/1: 00=10.7 01=10.3, 10=12.0, 11=12.7*/
/* default 0x0ea for 240x128 */
0x081, /* set contrast (bits 0..5) and gain (bits 6/7) */
0x072, /* default for 240x128 displays: 0x072*/
0x02f, /* power on, Bit 2 PC2=1 (internal charge pump), Bits 0/1: cap of panel */
U8G_ESC_DLY(50), /* delay 50 ms */
0x040, /* set display start line to 0 */
0x090, /* no fixed lines */
0x089, /* RAM access control */
0x0af, /* disable sleep mode */
0x0a4, /* normal display */
0x0a5, /* display all points, ST7565, UC1610 */
// 0x0a7, /* inverse display */
0x0a6, /* normal display */
U8G_ESC_DLY(100), /* delay 100 ms */
0x0a4, /* normal display */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_uc1608_240x128_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(0), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 (UC1608) */
0x000, /* set lower 4 bit of the col adr to 0 */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_uc1608_240x128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x128_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x128_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (UC1608) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 1);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 0);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); /* set contrast from, keep gain at 0 */
u8g_SetChipSelect(u8g, dev, 1);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_uc1608_240x128_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x128_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x128_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x128_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1608_240x128_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1608_240x128_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_uc1608_240x128_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1608_240x128_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_uc1608_240x128_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_uc1608_240x128_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1608_240x128_2x_buf};
u8g_dev_t u8g_dev_uc1608_240x128_2x_sw_spi = { u8g_dev_uc1608_240x128_2x_fn, &u8g_dev_uc1608_240x128_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_uc1608_240x128_2x_hw_spi = { u8g_dev_uc1608_240x128_2x_fn, &u8g_dev_uc1608_240x128_2x_pb, U8G_COM_HW_SPI };

168
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1608_240x64.c Normal file
View File

@ -0,0 +1,168 @@
/*
u8g_dev_uc1608_240x64.c
Universal 8bit Graphics Library
Copyright (c) 2013, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8g.h"
#define WIDTH 240
#define HEIGHT 64
#define PAGE_HEIGHT 8
/* see also ERC24064-1 for init sequence example */
static const uint8_t u8g_dev_uc1608_240x64_init_seq[] PROGMEM = {
U8G_ESC_CS(1), /* disable chip (UC1608 has positive logic for CS) */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (15*16)+2 milliseconds */
U8G_ESC_CS(0), /* enable chip */
0x0e2, /* soft reset */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_DLY(100), /* delay 100 ms */
#if HEIGHT <= 96
0x023, /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */
#else
/* 30 Nov 2013: not tested */
0x027, /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */
#endif
0x0c8, /* Map control, Bit 3: MY=1, Bit 2: MX=0, Bit 0: MSF =0 */
0x0e8, /* LCD bias Bits 0/1: 00=10.7 01=10.3, 10=12.0, 11=12.7*/
0x081, /* set contrast (bits 0..5) and gain (bits 6/7) */
0x014, /* ECR24064-1 default: 0x040*/
0x02f, /* power on, Bit 2 PC2=1 (internal charge pump), Bits 0/1: cap of panel */
U8G_ESC_DLY(50), /* delay 50 ms */
0x040, /* set display start line to 0 */
0x090, /* no fixed lines */
0x089, /* RAM access control */
0x0af, /* disable sleep mode */
0x0a4, /* normal display */
0x0a5, /* display all points, ST7565, UC1610 */
U8G_ESC_DLY(100), /* delay 100 ms */
0x0a4, /* normal display */
U8G_ESC_CS(1), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_uc1608_240x64_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(0), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 (UC1608) */
0x000, /* set lower 4 bit of the col adr to 0 */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_uc1608_240x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (UC1608) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 1);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 0);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); /* set contrast from, keep gain at 0 */
u8g_SetChipSelect(u8g, dev, 1);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_uc1608_240x64_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x64_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1608_240x64_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1608_240x64_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1608_240x64_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_uc1608_240x64_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1608_240x64_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_uc1608_240x64_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_uc1608_240x64_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1608_240x64_2x_buf};
u8g_dev_t u8g_dev_uc1608_240x64_2x_sw_spi = { u8g_dev_uc1608_240x64_2x_fn, &u8g_dev_uc1608_240x64_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_uc1608_240x64_2x_hw_spi = { u8g_dev_uc1608_240x64_2x_fn, &u8g_dev_uc1608_240x64_2x_pb, U8G_COM_HW_SPI };

14
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1610_dogxl160.c
View File

@ -101,7 +101,7 @@ uint8_t u8g_dev_uc1610_dogxl160_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, v
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -145,7 +145,7 @@ uint8_t u8g_dev_uc1610_dogxl160_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, v
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -177,7 +177,7 @@ uint8_t u8g_dev_uc1610_dogxl160_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -208,7 +208,7 @@ uint8_t u8g_dev_uc1610_dogxl160_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
u8g_SetAddress(u8g, dev, 1); /* data mode */
for( i = 0; i < WIDTH; i++ )
{
u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf+WIDTH))[i] ) );
u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)((uint8_t *)(pb->buf)+WIDTH))[i] ) );
}
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start);
@ -216,7 +216,7 @@ uint8_t u8g_dev_uc1610_dogxl160_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
u8g_SetAddress(u8g, dev, 1); /* data mode */
for( i = 0; i < WIDTH; i++ )
{
u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf+WIDTH))[i] >> 4 ) );
u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)((uint8_t *)(pb->buf)+WIDTH))[i] >> 4 ) );
}
u8g_SetChipSelect(u8g, dev, 0);
@ -238,7 +238,7 @@ uint8_t u8g_dev_uc1610_dogxl160_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -256,7 +256,7 @@ uint8_t u8g_dev_uc1610_dogxl160_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start);
u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*2+1) ); /* select current page (UC1610) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_WriteSequence(u8g, dev, WIDTH, pb->buf+WIDTH) == 0 )
if ( u8g_WriteSequence(u8g, dev, WIDTH, (uint8_t *)(pb->buf)+WIDTH) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 0);

116
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1611_dogm240.c Normal file
View File

@ -0,0 +1,116 @@
/*
u8g_dev_uc1611_dogm240.c
Universal 8bit Graphics Library
Copyright (c) 2014, dev.menges.jonas@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8g.h"
#define WIDTH 240
#define HEIGHT 64
#define PAGE_HEIGHT 8
static const uint8_t u8g_dev_uc1611_dogm240_init_seq[] PROGMEM = {
U8G_ESC_CS(1), // enable chip
U8G_ESC_ADR(0), // instruction mode
0xF1, // set last COM electrode
0x3F, // 64-1=63
0xF2, // set display start line
0x00, // 0
0xF3, // set display end line
0x3F, // 64-1=63
0x81, // set contrast (0-255)
0xB7, // 183
0xC0, // set view
//0x04, // topview
0x02, // bottomview
0xA3, // set line rate (9.4k)
0xE9, // set bias ratio (10)
0xA9, // enable display
0xD1, // set black and white mode
U8G_ESC_CS(0), // disable chip
U8G_ESC_END // end of sequence
};
static void setPage(u8g_t *u8g, u8g_dev_t *dev, unsigned char page)
{
u8g_WriteByte(u8g, dev, 0x70);
u8g_WriteByte(u8g, dev, 0x60 + (page&0x0F));
}
static const uint8_t u8g_dev_uc1611_dogm240_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x10, /* set upper 4 bit of the col adr to 0 */
0x00, /* set lower 4 bit of the col adr to 0 */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_uc1611_dogm240_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1611_dogm240_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1611_dogm240_data_start);
setPage(u8g, dev, pb->p.page); /* select current page (uc1611) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 1);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 0);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x81);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); /* set contrast from, keep gain at 0 */
u8g_SetChipSelect(u8g, dev, 1);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1611_dogm240_i2c , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1611_dogm240_fn, U8G_COM_UC_I2C);
U8G_PB_DEV(u8g_dev_uc1611_dogm240_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1611_dogm240_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_uc1611_dogm240_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1611_dogm240_fn, U8G_COM_HW_SPI);

116
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1611_dogxl240.c Normal file
View File

@ -0,0 +1,116 @@
/*
u8g_dev_uc1611_dogxl240.c
Universal 8bit Graphics Library
Copyright (c) 2014, dev.menges.jonas@gmail.com, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8g.h"
#define WIDTH 240
#define HEIGHT 128
#define PAGE_HEIGHT 8
static const uint8_t u8g_dev_uc1611_dogxl240_init_seq[] PROGMEM = {
U8G_ESC_CS(1), // enable chip
U8G_ESC_ADR(0), // instruction mode
0xF1, // set last COM electrode
0x7F, // DOGXL240
0xF2, // set display start line
0x00, // 0
0xF3, // set display end line
0x7F, // DOGXL240
0x81, // set contrast (0-255)
0xAA, // DOGXL240
0xC0, // set view
//0x04, // topview
0x02, // bottomview
0xA3, // set line rate (9.4k)
0xE9, // set bias ratio (10)
0xA9, // enable display
0xD1, // set black and white mode
U8G_ESC_CS(0), // disable chip
U8G_ESC_END // end of sequence
};
static void u8g_dev_dogxl240_set_page(u8g_t *u8g, u8g_dev_t *dev, unsigned char page)
{
u8g_WriteByte(u8g, dev, 0x70);
u8g_WriteByte(u8g, dev, 0x60 + (page&0x0F));
}
static const uint8_t u8g_dev_uc1611_dogxl240_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x10, /* set upper 4 bit of the col adr to 0 */
0x00, /* set lower 4 bit of the col adr to 0 */
U8G_ESC_END /* end of sequence */
};
static uint8_t u8g_dev_uc1611_dogxl240_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1611_dogxl240_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1611_dogxl240_data_start);
u8g_dev_dogxl240_set_page(u8g, dev, pb->p.page); /* select current page (uc1611) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
return 0;
u8g_SetChipSelect(u8g, dev, 1);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 0);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x81);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); /* set contrast from, keep gain at 0 */
u8g_SetChipSelect(u8g, dev, 1);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1611_dogxl240_i2c , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1611_dogxl240_fn, U8G_COM_UC_I2C);
U8G_PB_DEV(u8g_dev_uc1611_dogxl240_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1611_dogxl240_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_uc1611_dogxl240_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1611_dogxl240_fn, U8G_COM_HW_SPI);

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1701_dogs102.c
View File

@ -45,6 +45,8 @@ static const uint8_t u8g_dev_dogs102_init_seq[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
0x0e2, /* soft reset */
0x040, /* set display start line to 0 */
0x0a1, /* ADC set to reverse */
0x0c0, /* common output mode */
@ -80,7 +82,7 @@ uint8_t u8g_dev_dogs102_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_dogs102_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -107,7 +109,49 @@ uint8_t u8g_dev_dogs102_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_uc1701_dogs102_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_dogs102_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_dogs102_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_dogs102_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1701_dogs102_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_dogs102_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_uc1701_dogs102_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_dogs102_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_uc1701_dogs102_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_uc1701_dogs102_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1701_dogs102_2x_buf};
u8g_dev_t u8g_dev_uc1701_dogs102_2x_sw_spi = { u8g_dev_uc1701_dogs102_2x_fn, &u8g_dev_uc1701_dogs102_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_uc1701_dogs102_2x_hw_spi = { u8g_dev_uc1701_dogs102_2x_fn, &u8g_dev_uc1701_dogs102_2x_pb, U8G_COM_HW_SPI };

46
ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_dev_uc1701_mini12864.c
View File

@ -46,6 +46,7 @@ static const uint8_t u8g_dev_uc1701_mini12864_init_seq[] PROGMEM = {
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
0x0e2, /* soft reset */
0x040, /* set display start line to 0 */
0x0a0, /* ADC set to reverse */
0x0c8, /* common output mode */
@ -83,7 +84,7 @@ uint8_t u8g_dev_uc1701_mini12864_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev);
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_init_seq);
break;
case U8G_DEV_MSG_STOP:
@ -110,5 +111,48 @@ uint8_t u8g_dev_uc1701_mini12864_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, voi
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_uc1701_mini12864_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_data_start);
u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1701_mini12864_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_uc1701_mini12864_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_fn, U8G_COM_HW_SPI);
uint8_t u8g_dev_uc1701_mini12864_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_uc1701_mini12864_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1701_mini12864_2x_buf};
u8g_dev_t u8g_dev_uc1701_mini12864_2x_sw_spi = { u8g_dev_uc1701_mini12864_2x_fn, &u8g_dev_uc1701_mini12864_2x_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_uc1701_mini12864_2x_hw_spi = { u8g_dev_uc1701_mini12864_2x_fn, &u8g_dev_uc1701_mini12864_2x_pb, U8G_COM_HW_SPI };

Some files were not shown because too many files have changed in this diff Show More