bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Merge pull request #4287 from thinkyhead/rc_long_print_times

Browse Source 
Allow stopwatch and printcounter to go over 18:12:15
This commit is contained in:
Scott Lahteine 2016-07-14 12:14:15 -07:00 committed by GitHub
commit 75901b616c
12 changed files with 108 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
Marlin/Marlin_main.cpp
View File

@ -1169,14 +1169,6 @@ inline void get_serial_commands() {
) {
if (card_eof) {
SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
print_job_timer.stop();
char time[30];
millis_t t = print_job_timer.duration();
int hours = t / 60 / 60, minutes = (t / 60) % 60;
sprintf_P(time, PSTR("%i " MSG_END_HOUR " %i " MSG_END_MINUTE), hours, minutes);
SERIAL_ECHO_START;
SERIAL_ECHOLN(time);
lcd_setstatus(time, true);
card.printingHasFinished();
card.checkautostart(true);
}
@ -3949,12 +3941,22 @@ inline void gcode_M17() {
*/
inline void gcode_M31() {
millis_t t = print_job_timer.duration();
int min = t / 60, sec = t % 60;
char time[30];
sprintf_P(time, PSTR("%i min, %i sec"), min, sec);
SERIAL_ECHO_START;
SERIAL_ECHOLN(time);
int d = int(t / 60 / 60 / 24),
h = int(t / 60 / 60) % 60,
m = int(t / 60) % 60,
s = int(t % 60);
char time[18]; // 123456789012345678
if (d)
sprintf_P(time, PSTR("%id %ih %im %is"), d, h, m, s); // 99d 23h 59m 59s
else
sprintf_P(time, PSTR("%ih %im %is"), h, m, s); // 23h 59m 59s
lcd_setstatus(time);
SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_PRINT_TIME " ");
SERIAL_ECHOLN(time);
thermalManager.autotempShutdown();
}

6
Marlin/cardreader.cpp
View File

@ -602,19 +602,19 @@ void CardReader::updir() {
void CardReader::printingHasFinished() {
stepper.synchronize();
if (file_subcall_ctr > 0) { // Heading up to a parent file that called current as a procedure.
file.close();
if (file_subcall_ctr > 0) { // Heading up to a parent file that called current as a procedure.
file_subcall_ctr--;
openFile(proc_filenames[file_subcall_ctr], true, true);
setIndex(filespos[file_subcall_ctr]);
startFileprint();
}
else {
file.close();
sdprinting = false;
if (SD_FINISHED_STEPPERRELEASE)
enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
thermalManager.autotempShutdown();
print_job_timer.stop();
enqueue_and_echo_commands_P(PSTR("M31"));
}
}

2
Marlin/dogm_lcd_implementation.h
View File

@ -386,7 +386,7 @@ static void lcd_implementation_status_screen() {
}
u8g.setPrintPos(80,48);
uint16_t time = print_job_timer.duration() / 60;
millis_t time = print_job_timer.duration() / 60;
if (time != 0) {
lcd_print(itostr2(time/60));
lcd_print(':');

8
Marlin/language_cz.h
View File

@ -209,12 +209,12 @@
#define MSG_INFO_BAUDRATE "Rychlost"
#define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Pocet tisku "
#define MSG_INFO_FINISHED_PRINTS "Dokonceno "
#define MSG_INFO_PRINT_TIME "Celkovy cas "
#define MSG_INFO_PRINT_COUNT "Pocet tisku"
#define MSG_INFO_COMPLETED_PRINTS "Dokonceno "
#define MSG_INFO_PRINT_TIME "Celkovy cas"
#else
#define MSG_INFO_PRINT_COUNT "Tisky "
#define MSG_INFO_FINISHED_PRINTS "Hotovo "
#define MSG_INFO_COMPLETED_PRINTS "Hotovo"
#define MSG_INFO_PRINT_TIME "Cas "
#endif
#define MSG_INFO_MIN_TEMP "Teplota min"

13
Marlin/language_de.h
View File

@ -179,9 +179,16 @@
#define MSG_INFO_EXTRUDERS "Extruders"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protokol"
#define MSG_INFO_TOTAL_PRINTS "Gesamte Drucke"
#define MSG_INFO_FINISHED_PRINTS "Beendete Drucke"
#define MSG_INFO_PRINT_TIME "Gesamte Druckzeit"
#if LCD_WIDTH > 19
#define MSG_INFO_TOTAL_PRINTS "Gesamte Drucke "
#define MSG_INFO_COMPLETED_PRINTS "Beendete Drucke "
#define MSG_INFO_PRINT_TIME "Gesamte Druckzeit"
#else
#define MSG_INFO_PRINT_COUNT "Prints "
#define MSG_INFO_COMPLETED_PRINTS "Completed"
#define MSG_INFO_PRINT_TIME "Duration "
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Stromversorgung"

15
Marlin/language_el.h
View File

@ -198,6 +198,7 @@
#define MSG_DELTA_CALIBRATE_Y "Βαθμονόμηση Y"
#define MSG_DELTA_CALIBRATE_Z "Βαθμονόμηση Z"
#define MSG_DELTA_CALIBRATE_CENTER "Βαθμονόμηση κέντρου"
#define MSG_INFO_MENU "About Printer"
#define MSG_INFO_PRINTER_MENU "Printer Info"
#define MSG_INFO_STATS_MENU "Printer Stats"
@ -206,12 +207,20 @@
#define MSG_INFO_EXTRUDERS "Extruders"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#define MSG_INFO_TOTAL_PRINTS "Total Prints"
#define MSG_INFO_FINISHED_PRINTS "Finished Prints"
#define MSG_INFO_PRINT_TIME "Total Print Time"
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Print Count"
#define MSG_INFO_COMPLETED_PRINTS "Completed "
#define MSG_INFO_PRINT_TIME "Total Time "
#else
#define MSG_INFO_PRINT_COUNT "Prints "
#define MSG_INFO_COMPLETED_PRINTS "Completed"
#define MSG_INFO_PRINT_TIME "Duration "
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Power Supply"
#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print"

17
Marlin/language_en.h
View File

@ -488,12 +488,18 @@
#ifndef MSG_PLEASE_RESET
#define MSG_PLEASE_RESET "Please reset"
#endif
#ifndef MSG_END_DAY
#define MSG_END_DAY "days"
#endif
#ifndef MSG_END_HOUR
#define MSG_END_HOUR "hours"
#endif
#ifndef MSG_END_MINUTE
#define MSG_END_MINUTE "minutes"
#endif
#ifndef MSG_PRINT_TIME
#define MSG_PRINT_TIME "Print time"
#endif
#ifndef MSG_HEATING
#define MSG_HEATING "Heating..."
#endif
@ -521,6 +527,7 @@
#ifndef MSG_DELTA_CALIBRATE_CENTER
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif
#ifndef MSG_INFO_MENU
#define MSG_INFO_MENU "About Printer"
#endif
@ -548,10 +555,10 @@
#if LCD_WIDTH > 19
#ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT "Print Count "
#define MSG_INFO_PRINT_COUNT "Print Count"
#endif
#ifndef MSG_INFO_FINISHED_PRINTS
#define MSG_INFO_FINISHED_PRINTS "Finished "
#ifndef MSG_INFO_COMPLETED_PRINTS
#define MSG_INFO_COMPLETED_PRINTS "Completed "
#endif
#ifndef MSG_INFO_PRINT_TIME
#define MSG_INFO_PRINT_TIME "Total Time "
@ -560,8 +567,8 @@
#ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT "Prints "
#endif
#ifndef MSG_INFO_FINISHED_PRINTS
#define MSG_INFO_FINISHED_PRINTS "Finished "
#ifndef MSG_INFO_COMPLETED_PRINTS
#define MSG_INFO_COMPLETED_PRINTS "Completed"
#endif
#ifndef MSG_INFO_PRINT_TIME
#define MSG_INFO_PRINT_TIME "Duration "

17
Marlin/printcounter.cpp
View File

@ -27,12 +27,12 @@ PrintCounter::PrintCounter(): super() {
this->loadStats();
}
uint16_t PrintCounter::deltaDuration() {
millis_t PrintCounter::deltaDuration() {
#if ENABLED(DEBUG_PRINTCOUNTER)
PrintCounter::debug(PSTR("deltaDuration"));
#endif
uint16_t tmp = this->lastDuration;
millis_t tmp = this->lastDuration;
this->lastDuration = this->duration();
return this->lastDuration - tmp;
}
@ -88,12 +88,12 @@ void PrintCounter::showStats() {
SERIAL_ECHO(this->data.totalPrints - this->data.finishedPrints
- ((this->isRunning() || this->isPaused()) ? 1 : 0)); // Removes 1 from failures with an active counter
uint32_t t = this->data.printTime / 60;
millis_t t = this->data.printTime / 60; // minutes from seconds
SERIAL_ECHOPGM(", Total print time: ");
SERIAL_ECHO(t / 60);
SERIAL_ECHO(t / 60); // hours
SERIAL_ECHOPGM("h ");
SERIAL_ECHO(t % 60);
SERIAL_ECHO(t % 60); // minutes
SERIAL_ECHOPGM("min");
@ -110,10 +110,10 @@ void PrintCounter::showStats() {
void PrintCounter::tick() {
if (!this->isRunning()) return;
static uint32_t update_before = millis(),
static millis_t update_before = millis(),
eeprom_before = millis();
uint32_t now = millis();
millis_t now = millis();
// Trying to get the amount of calculations down to the bare min
const static uint16_t i = this->updateInterval * 1000;
@ -128,8 +128,7 @@ void PrintCounter::tick() {
}
// Trying to get the amount of calculations down to the bare min
const static uint32_t j = this->saveInterval * 1000;
const static millis_t j = this->saveInterval * 1000;
if (now - eeprom_before >= j) {
eeprom_before = now;
this->saveStats();

8
Marlin/printcounter.h
View File

@ -35,8 +35,8 @@ struct printStatistics { // 13 bytes
//const uint8_t magic; // Magic header, it will always be 0x16
uint16_t totalPrints; // Number of prints
uint16_t finishedPrints; // Number of complete prints
uint32_t printTime; // Total printing time
uint32_t longestPrint; // Longest print job - not in use
millis_t printTime; // Total printing time
millis_t longestPrint; // Longest print job - not in use
};
class PrintCounter: public Stopwatch {
@ -74,7 +74,7 @@ class PrintCounter: public Stopwatch {
* @details Stores the timestamp of the last deltaDuration(), this is
* required due to the updateInterval cycle.
*/
uint16_t lastDuration;
millis_t lastDuration;
/**
* @brief Stats were loaded from EERPROM
@ -90,7 +90,7 @@ class PrintCounter: public Stopwatch {
* used internally for print statistics accounting is not intended to be a
* user callable function.
*/
uint16_t deltaDuration();
millis_t deltaDuration();
public:
/**

4
Marlin/stopwatch.cpp
View File

@ -88,9 +88,9 @@ bool Stopwatch::isPaused() {
return (this->state == STOPWATCH_PAUSED) ? true : false;
}
uint16_t Stopwatch::duration() {
millis_t Stopwatch::duration() {
return (((this->isRunning()) ? millis() : this->stopTimestamp)
- this->startTimestamp) / 1000 + this->accumulator;
- this->startTimestamp) / 1000UL + this->accumulator;
}
#if ENABLED(DEBUG_STOPWATCH)

8
Marlin/stopwatch.h
View File

@ -42,9 +42,9 @@ enum StopwatchState {
class Stopwatch {
private:
StopwatchState state;
uint16_t accumulator;
uint32_t startTimestamp;
uint32_t stopTimestamp;
millis_t accumulator;
millis_t startTimestamp;
millis_t stopTimestamp;
public:
/**
@ -101,7 +101,7 @@ class Stopwatch {
* @details Returns the total number of seconds the timer has been running.
* @return the delta since starting the stopwatch
*/
uint16_t duration();
millis_t duration();
#if ENABLED(DEBUG_STOPWATCH)

12
Marlin/ultralcd.cpp
View File

@ -1967,13 +1967,13 @@ void kill_screen(const char* lcd_msg) {
print_job_counter.loadStats();
printStatistics stats = print_job_counter.getStats();
char printTime[6];
sprintf(printTime, "%02d:%02d", int(stats.printTime / 3600), int(stats.printTime / 60) % 60);
char timeString[8];
sprintf_P(timeString, PSTR("%i:%02i"), int(stats.printTime / 60 / 60), int(stats.printTime / 60) % 60);
START_SCREEN();
STATIC_ITEM(MSG_INFO_PRINT_COUNT ": ", false, false, itostr3left(stats.totalPrints)); // Print Count : 999
STATIC_ITEM(MSG_INFO_FINISHED_PRINTS ": ", false, false, itostr3left(stats.finishedPrints)); // Finished : 666
STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", false, false, printTime); // Total Time : 12:34
START_SCREEN(); // 12345678901234567890
STATIC_ITEM(MSG_INFO_PRINT_COUNT ": ", false, false, itostr3left(stats.totalPrints)); // Print Count: 999
STATIC_ITEM(MSG_INFO_COMPLETED_PRINTS": ", false, false, itostr3left(stats.finishedPrints)); // Completed : 666
STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", false, false, timeString); // Total Time : 123:45
END_SCREEN();
}
#endif // PRINTCOUNTER