bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Fix MIN/MAX function collision with macros

Browse Source
This commit is contained in:
Scott Lahteine
2019-07-05 18:01:21 -05:00
parent b6546ea33a
commit 750a16ad38
63 changed files with 167 additions and 167 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c
View File

@ -1904,7 +1904,7 @@ static void udd_ep_in_sent(udd_ep_id_t ep)
ptr_src = &ptr_job->buf[ptr_job->buf_cnt];
nb_remain = ptr_job->buf_size - ptr_job->buf_cnt;
// Fill a bank even if no data (ZLP)
nb_data = MIN(nb_remain, pkt_size);
nb_data = _MIN(nb_remain, pkt_size);
// Modify job information
ptr_job->buf_cnt += nb_data;
ptr_job->buf_load = nb_data;

2
Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.h
View File

@ -291,7 +291,7 @@ extern "C" {
//! available greater size, then applies register format of UOTGHS controller
//! for endpoint size bit-field.
#undef udd_format_endpoint_size
#define udd_format_endpoint_size(size) (32 - clz(((uint32_t)MIN(MAX(size, 8), 1024) << 1) - 1) - 1 - 3)
#define udd_format_endpoint_size(size) (32 - clz(((uint32_t)_MIN(_MAX(size, 8), 1024) << 1) - 1) - 1 - 3)
//! Configures the selected endpoint size
#define udd_configure_endpoint_size(ep, size) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPSIZE_Msk, udd_format_endpoint_size(size)))
//! Gets the configured selected endpoint size

2
Marlin/src/HAL/HAL_LINUX/main.cpp
View File

@ -49,7 +49,7 @@ void write_serial_thread() {
void read_serial_thread() {
char buffer[255] = {};
for (;;) {
std::size_t len = MIN(usb_serial.receive_buffer.free(), 254U);
std::size_t len = _MIN(usb_serial.receive_buffer.free(), 254U);
if (fgets(buffer, len, stdin))
for (std::size_t i = 0; i < strlen(buffer); i++)
usb_serial.receive_buffer.write(buffer[i]);

2
Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp
View File

@ -162,7 +162,7 @@
// setup for SPI mode
SSP_CFG_Type HW_SPI_init; // data structure to hold init values
SSP_ConfigStructInit(&HW_SPI_init); // set values for SPI mode
HW_SPI_init.ClockRate = Marlin_speed[MIN(spiRate, 6)]; // put in the specified bit rate
HW_SPI_init.ClockRate = Marlin_speed[_MIN(spiRate, 6)]; // put in the specified bit rate
HW_SPI_init.Mode |= SSP_CR1_SSP_EN;
SSP_Init(LPC_SSPn, &HW_SPI_init); // puts the values into the proper bits in the SSP0 registers
}

4
Marlin/src/HAL/HAL_STM32F1/HAL_timers_STM32F1.cpp
View File

@ -110,7 +110,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
timer_set_prescaler(STEP_TIMER_DEV, (uint16_t)(STEPPER_TIMER_PRESCALE - 1));
timer_set_reload(STEP_TIMER_DEV, 0xFFFF);
timer_oc_set_mode(STEP_TIMER_DEV, STEP_TIMER_CHAN, TIMER_OC_MODE_FROZEN, TIMER_OC_NO_PRELOAD); // no output pin change
timer_set_compare(STEP_TIMER_DEV, STEP_TIMER_CHAN, MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (STEPPER_TIMER_RATE / frequency)));
timer_set_compare(STEP_TIMER_DEV, STEP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (STEPPER_TIMER_RATE / frequency)));
timer_no_ARR_preload_ARPE(STEP_TIMER_DEV); // Need to be sure no preload on ARR register
timer_attach_interrupt(STEP_TIMER_DEV, STEP_TIMER_CHAN, stepTC_Handler);
nvic_irq_set_priority(irq_num, STEP_TIMER_IRQ_PRIO);
@ -123,7 +123,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
timer_set_count(TEMP_TIMER_DEV, 0);
timer_set_prescaler(TEMP_TIMER_DEV, (uint16_t)(TEMP_TIMER_PRESCALE - 1));
timer_set_reload(TEMP_TIMER_DEV, 0xFFFF);
timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), ((F_CPU / TEMP_TIMER_PRESCALE) / frequency)));
timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), ((F_CPU / TEMP_TIMER_PRESCALE) / frequency)));
timer_attach_interrupt(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, tempTC_Handler);
nvic_irq_set_priority(irq_num, TEMP_TIMER_IRQ_PRIO);
timer_generate_update(TEMP_TIMER_DEV);