bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Single nozzle filament change (#11994)

Browse Source
This commit is contained in:
InsanityAutomation
2018-10-07 18:06:14 -04:00
committed by Scott Lahteine
parent bfcf570d68
commit 74cd6cb4fc
94 changed files with 1267 additions and 38 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
Marlin/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/default/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Anet/A2/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Anet/A2plus/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Anet/A6/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Anet/A8/Configuration.h
View File

@@ -156,6 +156,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View File

@@ -163,6 +163,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Cartesio/Configuration.h
View File

@@ -156,6 +156,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
View File

@@ -159,6 +159,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
View File

@@ -164,6 +164,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Creality/CR-8/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Creality/Ender-3/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Einstart-S/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Felix/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Formbot/Raptor/Configuration.h
View File

@@ -196,6 +196,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
View File

@@ -158,6 +158,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
View File

@@ -159,6 +159,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View File

@@ -160,6 +160,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/MakerParts/Configuration.h
View File

@@ -175,6 +175,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Malyan/M150/Configuration.h
View File

@@ -160,6 +160,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Malyan/M200/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/RigidBot/Configuration.h
View File

@@ -158,6 +158,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/SCARA/Configuration.h
View File

@@ -186,6 +186,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/STM32F10/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/STM32F4/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Sanguinololu/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/TheBorg/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/TinyBoy2/Configuration.h
View File

@@ -177,6 +177,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Tronxy/X3A/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View File

@@ -175,6 +175,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
View File

@@ -168,6 +168,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View File

@@ -160,6 +160,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/generic/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View File

@@ -159,6 +159,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View File

@@ -160,6 +160,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/makibox/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

12
Marlin/src/config/examples/wt150/Configuration.h
View File

@@ -155,6 +155,18 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.

2
Marlin/src/feature/pause.cpp
View File

@@ -112,7 +112,7 @@ static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_
return thermalManager.wait_for_hotend(active_extruder);
}
static void do_pause_e_move(const float &length, const float &fr) {
void do_pause_e_move(const float &length, const float &fr) {
current_position[E_AXIS] += length / planner.e_factor[active_extruder];
planner.buffer_line(current_position, fr, active_extruder);
planner.synchronize();

2
Marlin/src/feature/pause.h
View File

@@ -77,6 +77,8 @@ extern uint8_t did_pause_print;
#define DXC_PASS
#endif
void do_pause_e_move(const float &length, const float &fr);
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false DXC_PARAMS);
void wait_for_filament_reload(const int8_t max_beep_count=0 DXC_PARAMS);

63
Marlin/src/gcode/config/M217.cpp Normal file
View File

@@ -0,0 +1,63 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(SINGLENOZZLE)
#include "../gcode.h"
#include "../../module/tool_change.h"
#if NUM_SERIAL > 1
#include "../../gcode/queue.h"
#endif
void M217_report(const bool eeprom=false) {
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
#endif
serialprintPGM_P(port, eeprom ? PSTR(" M217") : PSTR("Singlenozzle:"));
SERIAL_ECHOPAIR_P(port, " S", singlenozzle_swap_length);
SERIAL_ECHOPAIR_P(port, " P", singlenozzle_prime_speed);
SERIAL_ECHOLNPAIR_P(port, " R", singlenozzle_retract_speed);
}
/**
* M217 - Set SINGLENOZZLE toolchange parameters
*
* S[mm] Swap length
* P[mm/s] Prime speed
* R[mm/s] Retract speed
*/
void GcodeSuite::M217() {
bool report = true;
if (parser.seenval('S')) { report = false; const float v = parser.value_float(); singlenozzle_swap_length = constrain(v, 0, 500); }
if (parser.seenval('P')) { report = false; const int16_t v = parser.value_int(); singlenozzle_prime_speed = constrain(v, 10, 5400); }
if (parser.seenval('R')) { report = false; const int16_t v = parser.value_int(); singlenozzle_retract_speed = constrain(v, 10, 5400); }
if (report) M217_report();
}
#endif // SINGLENOZZLE

4
Marlin/src/gcode/gcode.cpp
View File

@@ -487,6 +487,10 @@ void GcodeSuite::process_parsed_command(
case 211: M211(); break; // M211: Enable, Disable, and/or Report software endstops
#if ENABLED(SINGLENOZZLE)
case 217: M217(); break; // M217: Set filament swap parameters
#endif
#if HOTENDS > 1
case 218: M218(); break; // M218: Set a tool offset
#endif

5
Marlin/src/gcode/gcode.h
View File

@@ -165,6 +165,7 @@
* M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT_AUTORETRACT)
Every normal extrude-only move will be classified as retract depending on the direction.
* M211 - Enable, Disable, and/or Report software endstops: S<0|1> (Requires MIN_SOFTWARE_ENDSTOPS or MAX_SOFTWARE_ENDSTOPS)
* M217 - Set filament swap parameters: "M217 S<length> P<feedrate> R<feedrate>". (Requires SINGLENOZZLE)
* M218 - Set/get a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders)
* M220 - Set Feedrate Percentage: "M220 S<percent>" (i.e., "FR" on the LCD)
* M221 - Set Flow Percentage: "M221 S<percent>"
@@ -617,6 +618,10 @@ private:
static void M211();
#if ENABLED(SINGLENOZZLE)
static void M217();
#endif
#if HOTENDS > 1
static void M218();
#endif

29
Marlin/src/gcode/temperature/M104_M109.cpp
View File

@@ -35,6 +35,10 @@
#include "../../feature/leds/leds.h"
#endif
#if ENABLED(SINGLENOZZLE)
#include "../../module/tool_change.h"
#endif
/**
* M104: Set hot end temperature
*/
@@ -44,12 +48,12 @@ void GcodeSuite::M104() {
const uint8_t e = target_extruder;
#if ENABLED(SINGLENOZZLE)
if (e != active_extruder) return;
#endif
if (parser.seenval('S')) {
const int16_t temp = parser.value_celsius();
#if ENABLED(SINGLENOZZLE)
singlenozzle_temp[e] = temp;
if (e != active_extruder) return;
#endif
thermalManager.setTargetHotend(temp, e);
#if ENABLED(DUAL_X_CARRIAGE)
@@ -85,14 +89,14 @@ void GcodeSuite::M109() {
if (get_target_extruder_from_command()) return;
if (DEBUGGING(DRYRUN)) return;
#if ENABLED(SINGLENOZZLE)
if (target_extruder != active_extruder) return;
#endif
const bool no_wait_for_cooling = parser.seenval('S'),
set_temp = no_wait_for_cooling || parser.seenval('R');
if (set_temp) {
const int16_t temp = parser.value_celsius();
#if ENABLED(SINGLENOZZLE)
singlenozzle_temp[target_extruder] = temp;
if (target_extruder != active_extruder) return;
#endif
thermalManager.setTargetHotend(temp, target_extruder);
#if ENABLED(DUAL_X_CARRIAGE)
@@ -115,13 +119,8 @@ void GcodeSuite::M109() {
#endif
#if ENABLED(ULTRA_LCD)
const bool heating = thermalManager.isHeatingHotend(target_extruder);
if (heating || !no_wait_for_cooling)
#if HOTENDS > 1
lcd_status_printf_P(0, heating ? PSTR("E%i " MSG_HEATING) : PSTR("E%i " MSG_COOLING), target_extruder + 1);
#else
lcd_setstatusPGM(heating ? PSTR("E " MSG_HEATING) : PSTR("E " MSG_COOLING));
#endif
if (thermalManager.isHeatingHotend(target_extruder) || !no_wait_for_cooling)
thermalManager.set_heating_message(target_extruder);
#endif
}

25
Marlin/src/gcode/temperature/M106_M107.cpp
View File

@@ -27,6 +27,11 @@
#include "../gcode.h"
#include "../../Marlin.h" // for fan_speed — should move those to Planner
#if ENABLED(SINGLENOZZLE)
#include "../../module/motion.h"
#include "../../module/tool_change.h"
#endif
/**
* M106: Set Fan Speed
*
@@ -42,6 +47,15 @@
*/
void GcodeSuite::M106() {
const uint8_t p = parser.byteval('P');
const uint16_t s = parser.ushortval('S', 255);
#if ENABLED(SINGLENOZZLE)
if (p != active_extruder) {
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = MIN(s, 255U);
return;
}
#endif
if (p < FAN_COUNT) {
#if ENABLED(EXTRA_FAN_SPEED)
const int16_t t = parser.intval('T');
@@ -55,14 +69,12 @@ void GcodeSuite::M106() {
fan_speed[p] = new_fan_speed[p];
break;
default:
new_fan_speed[p] = MIN(t, 255);
new_fan_speed[p] = MIN(t, 255U);
break;
}
return;
}
#endif // EXTRA_FAN_SPEED
const uint16_t s = parser.ushortval('S', 255);
fan_speed[p] = MIN(s, 255U);
}
}
@@ -72,6 +84,13 @@ void GcodeSuite::M106() {
*/
void GcodeSuite::M107() {
const uint16_t p = parser.ushortval('P');
#if ENABLED(SINGLENOZZLE)
if (p != active_extruder) {
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = 0;
return;
}
#endif
if (p < FAN_COUNT) fan_speed[p] = 0;
}

22
Marlin/src/inc/Conditionals_post.h
View File

@@ -1513,6 +1513,28 @@
// Add commands that need sub-codes to this list
#define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET) || ENABLED(CNC_COORDINATE_SYSTEMS) || ENABLED(POWER_LOSS_RECOVERY)
// Single Nozzle swap on toolchange defaults
#if ENABLED(SINGLENOZZLE)
#ifndef SINGLENOZZLE_SWAP_LENGTH
#define SINGLENOZZLE_SWAP_LENGTH 0
#endif
#ifndef SINGLENOZZLE_SWAP_RETRACT_SPEED
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 60.0
#endif
#ifndef SINGLENOZZLE_SWAP_PRIME_SPEED
#define SINGLENOZZLE_SWAP_PRIME_SPEED 60.0
#endif
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#ifndef SINGLENOZZLE_TOOLCHANGE_POSITION
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#endif
#else
#ifndef SINGLENOZZLE_TOOLCHANGE_ZRAISE
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
#endif
// Parking Extruder
#if ENABLED(PARKING_EXTRUDER)
#ifndef PARKING_EXTRUDER_GRAB_DISTANCE

4
Marlin/src/inc/SanityCheck.h
View File

@@ -602,6 +602,10 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
#endif
#if ENABLED(SINGLENOZZLE) && !defined(SINGLENOZZLE_SWAP_LENGTH)
#define SINGLENOZZLE_SWAP_LENGTH 0
#endif
#elif ENABLED(MK2_MULTIPLEXER)
#error "MK2_MULTIPLEXER requires 2 or more EXTRUDERS."
#elif ENABLED(SINGLENOZZLE)

12
Marlin/src/lcd/language/language_en.h
View File

@@ -768,6 +768,18 @@
#ifndef MSG_AUTORETRACT
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#endif
#ifndef MSG_FILAMENT_SWAP_LENGTH
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Retract Distance")
#endif
#ifndef MSG_SINGLENOZZLE_TOOL_CHANGE
#define MSG_SINGLENOZZLE_TOOL_CHANGE _UxGT("Tool Change")
#endif
#ifndef MSG_SINGLENOZZLE_PRIME_SPD
#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Prime Speed")
#endif
#ifndef MSG_SINGLENOZZLE_RETRACT_SPD
#define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Retract Speed")
#endif
#ifndef MSG_FILAMENTCHANGE
#define MSG_FILAMENTCHANGE _UxGT("Change filament")
#endif

33
Marlin/src/lcd/ultralcd.cpp
View File

@@ -138,6 +138,7 @@ millis_t next_lcd_update_ms;
} \
typedef void _name##_void
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int3, itostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int4, itostr4sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52);
@@ -267,6 +268,7 @@ millis_t next_lcd_update_ms;
typedef void _name##_void
DECLARE_MENU_EDIT_TYPE(int16_t, int3);
DECLARE_MENU_EDIT_TYPE(int16_t, int4);
DECLARE_MENU_EDIT_TYPE(uint8_t, int8);
DECLARE_MENU_EDIT_TYPE(float, float3);
DECLARE_MENU_EDIT_TYPE(float, float52);
@@ -974,15 +976,23 @@ void lcd_quick_feedback(const bool clear_buttons) {
#endif // POWER_LOSS_RECOVERY
#if ENABLED(SINGLENOZZLE)
void singlenozzle_swap_menu() {
START_MENU();
MENU_BACK(MSG_MAIN);
MENU_ITEM_EDIT(float3, MSG_FILAMENT_SWAP_LENGTH, &singlenozzle_swap_length, 0, 200);
MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_RETRACT_SPD, &singlenozzle_retract_speed, 10, 5400);
MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_PRIME_SPD, &singlenozzle_prime_speed, 10, 5400);
END_MENU();
}
#endif
#if ENABLED(MENU_ITEM_CASE_LIGHT)
#include "../feature/caselight.h"
void case_light_menu() {
START_MENU();
//
// ^ Main
//
MENU_BACK(MSG_MAIN);
MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true);
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
@@ -999,9 +1009,6 @@ void lcd_quick_feedback(const bool clear_buttons) {
*/
static void bltouch_menu() {
START_MENU();
//
// ^ Main
//
MENU_BACK(MSG_MAIN);
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
@@ -1042,7 +1049,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
void lcd_debug_menu() {
START_MENU();
MENU_BACK(MSG_MAIN); // ^ Main
MENU_BACK(MSG_MAIN);
#if ENABLED(LCD_PROGRESS_BAR_TEST)
MENU_ITEM(submenu, MSG_PROGRESS_BAR_TEST, _progress_bar_test);
@@ -1494,10 +1501,6 @@ void lcd_quick_feedback(const bool clear_buttons) {
*/
void lcd_tune_menu() {
START_MENU();
//
// ^ Main
//
MENU_BACK(MSG_MAIN);
//
@@ -3438,6 +3441,13 @@ void lcd_quick_feedback(const bool clear_buttons) {
#endif
}
//
// Set single nozzle filament retract and prime length
//
#if ENABLED(SINGLENOZZLE)
MENU_ITEM(submenu, MSG_SINGLENOZZLE_TOOL_CHANGE, singlenozzle_swap_menu);
#endif
//
// Set Case light on/off/brightness
//
@@ -5143,6 +5153,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
typedef void _name##_void
DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1);
DEFINE_MENU_EDIT_TYPE(int16_t, int4, itostr4sign, 1);
DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1);
DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1);
DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52, 100);

51
Marlin/src/module/configuration_store.cpp
View File

@@ -98,6 +98,11 @@ typedef struct { int16_t X, Y, Z; } tmc
#include "../feature/pause.h"
#endif
#if ENABLED(SINGLENOZZLE)
#include "tool_change.h"
void M217_report(const bool eeprom);
#endif
#if ENABLED(PID_EXTRUSION_SCALING)
#define LPQ_LEN thermalManager.lpq_len
#endif
@@ -289,6 +294,15 @@ typedef struct SettingsDataStruct {
float filament_change_unload_length[EXTRUDERS], // M603 T U
filament_change_load_length[EXTRUDERS]; // M603 T L
//
// SINGLENOZZLE toolchange values
//
#if ENABLED(SINGLENOZZLE)
float singlenozzle_swap_length; // M217 S
int16_t singlenozzle_prime_speed, // M217 P
singlenozzle_retract_speed; // M217 R
#endif
} SettingsData;
#pragma pack(pop)
@@ -947,6 +961,17 @@ void MarlinSettings::postprocess() {
for (uint8_t q = EXTRUDERS * 2; q--;) EEPROM_WRITE(dummy);
#endif
//
// SINGLENOZZLE
//
#if ENABLED(SINGLENOZZLE)
_FIELD_TEST(singlenozzle_swap_length);
EEPROM_WRITE(singlenozzle_swap_length);
EEPROM_WRITE(singlenozzle_prime_speed);
EEPROM_WRITE(singlenozzle_retract_speed);
#endif
//
// Validate CRC and Data Size
//
@@ -1582,6 +1607,17 @@ void MarlinSettings::postprocess() {
for (uint8_t q = EXTRUDERS * 2; q--;) EEPROM_READ(dummy);
#endif
//
// SINGLENOZZLE toolchange values
//
#if ENABLED(SINGLENOZZLE)
_FIELD_TEST(singlenozzle_swap_length);
EEPROM_READ(singlenozzle_swap_length);
EEPROM_READ(singlenozzle_prime_speed);
EEPROM_READ(singlenozzle_retract_speed);
#endif
eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET));
if (eeprom_error) {
#if ENABLED(EEPROM_CHITCHAT)
@@ -1840,6 +1876,12 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif
#endif
#if ENABLED(SINGLENOZZLE)
singlenozzle_swap_length = SINGLENOZZLE_SWAP_LENGTH;
singlenozzle_prime_speed = SINGLENOZZLE_SWAP_PRIME_SPEED;
singlenozzle_retract_speed = SINGLENOZZLE_SWAP_RETRACT_SPEED;
#endif
//
// Global Leveling
//
@@ -2897,6 +2939,15 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif // EXTRUDERS > 2
#endif // EXTRUDERS == 1
#endif // ADVANCED_PAUSE_FEATURE
#if ENABLED(SINGLENOZZLE)
CONFIG_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM_P(port, "SINGLENOZZLE:");
CONFIG_ECHO_START;
}
M217_report(true);
#endif
}
#endif // !DISABLE_M503

11
Marlin/src/module/temperature.cpp
View File

@@ -2416,6 +2416,17 @@ void Temperature::isr() {
#endif // AUTO_REPORT_TEMPERATURES
#if ENABLED(ULTRA_LCD)
void Temperature::set_heating_message(const uint8_t e) {
const bool heating = isHeatingHotend(e);
#if HOTENDS > 1
lcd_status_printf_P(0, heating ? PSTR("E%i " MSG_HEATING) : PSTR("E%i " MSG_COOLING), int(e + 1));
#else
lcd_setstatusPGM(heating ? PSTR("E " MSG_HEATING) : PSTR("E " MSG_COOLING));
#endif
}
#endif
#if HAS_TEMP_HOTEND
#ifndef MIN_COOLING_SLOPE_DEG

5
Marlin/src/module/temperature.h
View File

@@ -616,6 +616,10 @@ class Temperature {
#endif
#endif
#if ENABLED(ULTRA_LCD)
static void set_heating_message(const uint8_t e);
#endif
private:
#if ENABLED(FAST_PWM_FAN)
@@ -659,7 +663,6 @@ class Temperature {
#endif
#endif // THERMAL_PROTECTION
};
extern Temperature thermalManager;

100
Marlin/src/module/tool_change.cpp
View File

@@ -25,9 +25,24 @@
#include "probe.h"
#include "motion.h"
#include "planner.h"
#include "temperature.h"
#include "../Marlin.h"
#if ENABLED(SINGLENOZZLE)
float singlenozzle_swap_length = SINGLENOZZLE_SWAP_LENGTH;
int16_t singlenozzle_prime_speed = SINGLENOZZLE_SWAP_PRIME_SPEED,
singlenozzle_retract_speed = SINGLENOZZLE_SWAP_RETRACT_SPEED;
uint16_t singlenozzle_temp[EXTRUDERS];
#if FAN_COUNT > 0
uint8_t singlenozzle_fan_speed[EXTRUDERS];
#endif
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#include "../libs/point_t.h"
const point_t singlenozzle_change_point = SINGLENOZZLE_TOOLCHANGE_POSITION;
#endif
#endif
#if ENABLED(PARKING_EXTRUDER) && PARKING_EXTRUDER_SOLENOIDS_DELAY > 0
#include "../gcode/gcode.h" // for dwell()
#endif
@@ -625,16 +640,89 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
UNUSED(no_move);
#if ENABLED(MK2_MULTIPLEXER)
if (tmp_extruder >= E_STEPPERS)
return invalid_extruder_error(tmp_extruder);
if (tmp_extruder >= E_STEPPERS) return invalid_extruder_error(tmp_extruder);
select_multiplexed_stepper(tmp_extruder);
#endif
#if EXTRUDERS > 1
// Set the new active extruder
active_extruder = tmp_extruder;
#endif
#if ENABLED(SINGLENOZZLE)
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_HOTEND_TOO_COLD);
return;
}
#endif
#if FAN_COUNT > 0
singlenozzle_fan_speed[active_extruder] = fan_speed[0];
fan_speed[0] = singlenozzle_fan_speed[tmp_extruder];
#endif
set_destination_from_current();
current_position[Z_AXIS] += (
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
singlenozzle_change_point.z
#else
SINGLENOZZLE_TOOLCHANGE_ZRAISE
#endif
);
planner.buffer_line(current_position, planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
current_position[X_AXIS] = singlenozzle_change_point.x;
current_position[Y_AXIS] = singlenozzle_change_point.y;
planner.buffer_line(current_position, planner.max_feedrate_mm_s[Y_AXIS], active_extruder);
#endif
if (singlenozzle_swap_length) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(-singlenozzle_swap_length, MMM_TO_MMS(singlenozzle_retract_speed));
#else
current_position[E_AXIS] -= singlenozzle_swap_length / planner.e_factor[active_extruder];
planner.buffer_line(current_position, MMM_TO_MMS(singlenozzle_retract_speed), active_extruder);
#endif
}
singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0];
if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) {
thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0);
#if ENABLED(ULTRA_LCD)
thermalManager.set_heating_message(0);
#endif
(void)thermalManager.wait_for_hotend(0, false); // Wait for heating or cooling
}
active_extruder = tmp_extruder;
if (singlenozzle_swap_length) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(singlenozzle_swap_length, singlenozzle_prime_speed);
#else
current_position[E_AXIS] += singlenozzle_swap_length / planner.e_factor[tmp_extruder];
planner.buffer_line(current_position, singlenozzle_prime_speed, tmp_extruder);
#endif
}
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
current_position[X_AXIS] = destination[X_AXIS];
current_position[Y_AXIS] = destination[Y_AXIS];
planner.buffer_line(current_position, planner.max_feedrate_mm_s[Y_AXIS], active_extruder);
#endif
do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS]);
#else // !SINGLENOZZLE
active_extruder = tmp_extruder;
#endif // !SINGLENOZZLE
#endif // EXTRUDERS > 1
#endif // HOTENDS <= 1

10
Marlin/src/module/tool_change.h
View File

@@ -50,6 +50,16 @@
#endif // PARKING_EXTRUDER
#if ENABLED(SINGLENOZZLE)
extern float singlenozzle_swap_length;
extern int16_t singlenozzle_prime_speed,
singlenozzle_retract_speed;
extern uint16_t singlenozzle_temp[EXTRUDERS];
#if FAN_COUNT > 0
extern uint8_t singlenozzle_fan_speed[EXTRUDERS];
#endif
#endif
/**
* Perform a tool-change, which may result in moving the
* previous tool out of the way and the new tool into place.