diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index df12d05513..61c2fbefa9 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -732,9 +732,7 @@ void report_current_position_detail(); SERIAL_ECHOPAIR(", ", y); SERIAL_ECHOPAIR(", ", z); SERIAL_CHAR(')'); - - if (suffix) {serialprintPGM(suffix);} //won't compile for Teensy with the previous construction - else SERIAL_EOL(); + if (suffix) serialprintPGM(suffix); else SERIAL_EOL(); } void print_xyz(const char* prefix, const char* suffix, const float xyz[]) { @@ -6366,23 +6364,44 @@ inline void gcode_M42() { wait = parser.seen('W') ? parser.value_int() : 500; for (uint8_t pin = start; pin <= end; pin++) { + //report_pin_state_extended(pin, I_flag, false); + if (!I_flag && pin_is_protected(pin)) { - SERIAL_ECHOPAIR("Sensitive Pin: ", pin); - SERIAL_ECHOLNPGM(" untouched."); + report_pin_state_extended(pin, I_flag, true, "Untouched "); + SERIAL_EOL(); } else { - SERIAL_ECHOPAIR("Pulsing Pin: ", pin); - pinMode(pin, OUTPUT); - for (int16_t j = 0; j < repeat; j++) { - digitalWrite(pin, 0); - safe_delay(wait); - digitalWrite(pin, 1); - safe_delay(wait); - digitalWrite(pin, 0); - safe_delay(wait); + report_pin_state_extended(pin, I_flag, true, "Pulsing "); + #ifdef AVR_AT90USB1286_FAMILY // Teensy IDEs don't know about these pins so must use FASTIO + if (pin == 46) { + SET_OUTPUT(46); + for (int16_t j = 0; j < repeat; j++) { + WRITE(46, 0); safe_delay(wait); + WRITE(46, 1); safe_delay(wait); + WRITE(46, 0); safe_delay(wait); + } + } + else if (pin == 47) { + SET_OUTPUT(47); + for (int16_t j = 0; j < repeat; j++) { + WRITE(47, 0); safe_delay(wait); + WRITE(47, 1); safe_delay(wait); + WRITE(47, 0); safe_delay(wait); + } + } + else + #endif + { + pinMode(pin, OUTPUT); + for (int16_t j = 0; j < repeat; j++) { + digitalWrite(pin, 0); safe_delay(wait); + digitalWrite(pin, 1); safe_delay(wait); + digitalWrite(pin, 0); safe_delay(wait); + } } + } - SERIAL_CHAR('\n'); + SERIAL_EOL(); } SERIAL_ECHOLNPGM("Done."); @@ -6527,13 +6546,13 @@ inline void gcode_M42() { * M43 E - Enable / disable background endstop monitoring * - Machine continues to operate * - Reports changes to endstops - * - Toggles LED when an endstop changes + * - Toggles LED_PIN when an endstop changes * - Can not reliably catch the 5mS pulse from BLTouch type probes * * M43 T - Toggle pin(s) and report which pin is being toggled * S - Start Pin number. If not given, will default to 0 * L - End Pin number. If not given, will default to last pin defined for this board - * I - Flag to ignore Marlin's pin protection. Use with caution!!!! + * I - Flag to ignore Marlin's pin protection. Use with caution!!!! * R - Repeat pulses on each pin this number of times before continueing to next pin * W - Wait time (in miliseconds) between pulses. If not given will default to 500 * @@ -6542,7 +6561,7 @@ inline void gcode_M42() { */ inline void gcode_M43() { - if (parser.seen('T')) { // must be first ot else it's "S" and "E" parameters will execute endstop or servo test + if (parser.seen('T')) { // must be first or else it's "S" and "E" parameters will execute endstop or servo test toggle_pins(); return; } @@ -6576,6 +6595,7 @@ inline void gcode_M42() { for (int8_t pin = first_pin; pin <= last_pin; pin++) { if (pin_is_protected(pin) && !ignore_protection) continue; pinMode(pin, INPUT_PULLUP); + delay(1); /* if (IS_ANALOG(pin)) pin_state[pin - first_pin] = analogRead(pin - analogInputToDigitalPin(0)); // int16_t pin_state[...] @@ -6591,7 +6611,7 @@ inline void gcode_M42() { for (;;) { for (int8_t pin = first_pin; pin <= last_pin; pin++) { - if (pin_is_protected(pin)) continue; + if (pin_is_protected(pin) && !ignore_protection) continue; const byte val = /* IS_ANALOG(pin) @@ -6600,7 +6620,7 @@ inline void gcode_M42() { //*/ digitalRead(pin); if (val != pin_state[pin - first_pin]) { - report_pin_state(pin); + report_pin_state_extended(pin, ignore_protection, false); pin_state[pin - first_pin] = val; } } @@ -6612,14 +6632,14 @@ inline void gcode_M42() { } #endif - safe_delay(500); + safe_delay(200); } return; } // Report current state of selected pin(s) for (uint8_t pin = first_pin; pin <= last_pin; pin++) - report_pin_state_extended(pin, ignore_protection); + report_pin_state_extended(pin, ignore_protection, true); } #endif // PINS_DEBUGGING @@ -12164,7 +12184,9 @@ void prepare_move_to_destination() { val &= 0x07; switch (digitalPinToTimer(pin)) { #ifdef TCCR0A - case TIMER0A: + #if !AVR_AT90USB1286_FAMILY + case TIMER0A: + #endif case TIMER0B: //_SET_CS(0, val); break; diff --git a/Marlin/pinsDebug.h b/Marlin/pinsDebug.h index dafd51e357..5bd13a491d 100644 --- a/Marlin/pinsDebug.h +++ b/Marlin/pinsDebug.h @@ -20,18 +20,13 @@ * */ - bool endstop_monitor_flag = false; -#define NAME_FORMAT "%-28s" // one place to specify the format of all the sources of names +#define NAME_FORMAT "%-35s" // one place to specify the format of all the sources of names // "-" left justify, "28" minimum width of name, pad with blanks #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(7))) -#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)) -#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)) -#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)) - /** * This routine minimizes RAM usage by creating a FLASH resident array to * store the pin names, pin numbers and analog/digital flag. @@ -52,7 +47,7 @@ bool endstop_monitor_flag = false; #define REPORT_NAME_ANALOG(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER) #include "pinsDebug_list.h" -#line 56 +#line 51 // manually add pins that have names that are macros which don't play well with these macros #if SERIAL_PORT == 0 && (AVR_ATmega2560_FAMILY || AVR_ATmega1284_FAMILY) @@ -88,27 +83,34 @@ const char* const pin_array[][3] PROGMEM = { // manually add pins ... #if SERIAL_PORT == 0 #if AVR_ATmega2560_FAMILY - { RXD_NAME, "0", "1" }, - { TXD_NAME, "1", "1" }, + { RXD_NAME, 0, 1 }, + { TXD_NAME, 1, 1 }, #elif AVR_ATmega1284_FAMILY - { RXD_NAME, "8", "1" }, - { TXD_NAME, "9", "1" }, + { RXD_NAME, 8, 1 }, + { TXD_NAME, 9, 1 }, #endif #endif #include "pinsDebug_list.h" - #line 101 + #line 96 }; #define n_array (sizeof(pin_array) / sizeof(char*)) / 3 -#ifndef TIMER1B - // working with Teensyduino extension so need to re-define some things +#if AVR_AT90USB1286_FAMILY + // Working with Teensyduino extension so need to re-define some things #include "pinsDebug_Teensyduino.h" + // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs + // portModeRegister takes a different argument + #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p) + #define get_pinMode(pin) (*portModeRegister(pin) & digitalPinToBitMask(pin)) +#else + #define digitalPinToPort_DEBUG(p) digitalPinToPort(p) + bool get_pinMode(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask(pin); } #endif -#define PWM_PRINT(V) do{ sprintf(buffer, "PWM: %4d", V); SERIAL_ECHO(buffer); }while(0) +#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM: %4d"), V); SERIAL_ECHO(buffer); }while(0) #define PWM_CASE(N,Z) \ case TIMER##N##Z: \ if (TCCR##N##A & (_BV(COM##N##Z##1) | _BV(COM##N##Z##0))) { \ @@ -127,7 +129,9 @@ static bool pwm_status(uint8_t pin) { #if defined(TCCR0A) && defined(COM0A1) #ifdef TIMER0A - PWM_CASE(0, A); + #if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs + PWM_CASE(0, A); + #endif #endif PWM_CASE(0, B); #endif @@ -244,9 +248,10 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = { static void err_is_counter() { SERIAL_PROTOCOLPGM(" non-standard PWM mode"); } static void err_is_interrupt() { SERIAL_PROTOCOLPGM(" compare interrupt enabled"); } static void err_prob_interrupt() { SERIAL_PROTOCOLPGM(" overflow interrupt enabled"); } +static void print_is_also_tied() { SERIAL_PROTOCOLPGM(" is also tied to this pin"); SERIAL_PROTOCOL_SP(14); } void com_print(uint8_t N, uint8_t Z) { - uint8_t *TCCRA = (uint8_t*)TCCR_A(N); + const uint8_t *TCCRA = (uint8_t*)TCCR_A(N); SERIAL_PROTOCOLPGM(" COM"); SERIAL_PROTOCOLCHAR(N + '0'); switch (Z) { @@ -264,8 +269,8 @@ void com_print(uint8_t N, uint8_t Z) { void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - WGM bit layout char buffer[20]; // for the sprintf statements - uint8_t *TCCRB = (uint8_t*)TCCR_B(T); - uint8_t *TCCRA = (uint8_t*)TCCR_A(T); + const uint8_t *TCCRB = (uint8_t*)TCCR_B(T), + *TCCRA = (uint8_t*)TCCR_A(T); uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1)))); if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1); @@ -275,11 +280,11 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - SERIAL_PROTOCOL_SP(3); if (N == 3) { - uint8_t *OCRVAL8 = (uint8_t*)OCR_VAL(T, L - 'A'); + const uint8_t *OCRVAL8 = (uint8_t*)OCR_VAL(T, L - 'A'); PWM_PRINT(*OCRVAL8); } else { - uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A'); + const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A'); PWM_PRINT(*OCRVAL16); } SERIAL_PROTOCOLPAIR(" WGM: ", WGM); @@ -294,12 +299,12 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - SERIAL_PROTOCOLCHAR(T + '0'); SERIAL_PROTOCOLPAIR("B: ", *TCCRB); - uint8_t *TMSK = (uint8_t*)TIMSK(T); + const uint8_t *TMSK = (uint8_t*)TIMSK(T); SERIAL_PROTOCOLPGM(" TIMSK"); SERIAL_PROTOCOLCHAR(T + '0'); SERIAL_PROTOCOLPAIR(": ", *TMSK); - uint8_t OCIE = L - 'A' + 1; + const uint8_t OCIE = L - 'A' + 1; if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); } else { if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) err_is_counter(); } if (TEST(*TMSK, OCIE)) err_is_interrupt(); @@ -311,7 +316,9 @@ static void pwm_details(uint8_t pin) { #if defined(TCCR0A) && defined(COM0A1) #ifdef TIMER0A - case TIMER0A: timer_prefix(0, 'A', 3); break; + #if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs + case TIMER0A: timer_prefix(0, 'A', 3); break; + #endif #endif case TIMER0B: timer_prefix(0, 'B', 3); break; #endif @@ -357,136 +364,192 @@ static void pwm_details(uint8_t pin) { // on pins that have two PWMs, print info on second PWM #if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY // looking for port B7 - PWMs 0A and 1C - if (digitalPinToPort(pin) == 2 && digitalPinToBitMask(pin) == 0x80) { - #ifndef TEENSYDUINO_IDE + if (digitalPinToPort_DEBUG(pin) == 'B' - 64 && 0x80 == digitalPinToBitMask(pin)) { + #if !AVR_AT90USB1286_FAMILY SERIAL_PROTOCOLPGM("\n ."); SERIAL_PROTOCOL_SP(18); - SERIAL_PROTOCOLPGM("TIMER1C is also tied to this pin"); - SERIAL_PROTOCOL_SP(13); + SERIAL_PROTOCOLPGM("TIMER1C"); + print_is_also_tied(); timer_prefix(1, 'C', 4); #else SERIAL_PROTOCOLPGM("\n ."); SERIAL_PROTOCOL_SP(18); - SERIAL_PROTOCOLPGM("TIMER0A is also tied to this pin"); - SERIAL_PROTOCOL_SP(13); + SERIAL_PROTOCOLPGM("TIMER0A"); + print_is_also_tied(); timer_prefix(0, 'A', 3); #endif } #endif } // pwm_details -bool get_pinMode(int8_t pin) { return *portModeRegister(digitalPinToPort(pin)) & digitalPinToBitMask(pin); } - -#ifndef digitalRead_mod // use Teensyduino's version of digitalRead - it doesn't disable the PWMs - int digitalRead_mod(int8_t pin) { // same as digitalRead except the PWM stop section has been removed - uint8_t port = digitalPinToPort(pin); +#ifndef digitalRead_mod // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs + int digitalRead_mod(const int8_t pin) { // same as digitalRead except the PWM stop section has been removed + const uint8_t port = digitalPinToPort_DEBUG(pin); return (port != NOT_A_PIN) && (*portInputRegister(port) & digitalPinToBitMask(pin)) ? HIGH : LOW; } #endif void print_port(int8_t pin) { // print port number - #ifdef digitalPinToPort + #ifdef digitalPinToPort_DEBUG + uint8_t x; SERIAL_PROTOCOLPGM(" Port: "); - uint8_t x = digitalPinToPort(pin) + 64; + #if AVR_AT90USB1286_FAMILY + x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64; + #else + x = digitalPinToPort_DEBUG(pin) + 64; + #endif SERIAL_CHAR(x); - uint8_t temp = digitalPinToBitMask(pin); - for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1; + + #if AVR_AT90USB1286_FAMILY + if (pin == 46) + x = '2'; + else if (pin == 47) + x = '3'; + else { + uint8_t temp = digitalPinToBitMask(pin); + for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1; + } + #else + uint8_t temp = digitalPinToBitMask(pin); + for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1; + #endif SERIAL_CHAR(x); #else SERIAL_PROTOCOL_SP(10); #endif } +static void print_input_or_output(const bool isout) { + serialprintPGM(isout ? PSTR("Output = ") : PSTR("Input = ")); +} + // pretty report with PWM info -inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = true) { +inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = false,const char *start_string = "") { uint8_t temp_char; - char *name_mem_pointer; - char buffer[30]; // for the sprintf statements - bool found = false, - multi_name_pin = false; + char *name_mem_pointer, buffer[30]; // for the sprintf statements + bool found = false, multi_name_pin = false; for (uint8_t x = 0; x < n_array; x++) { // scan entire array and report all instances of this pin if (pgm_read_byte(&pin_array[x][1]) == pin) { if (found) multi_name_pin = true; found = true; if (!multi_name_pin) { // report digitial and analog pin number only on the first time through - sprintf(buffer, "PIN: %3d ", pin); // digital pin number + sprintf_P(buffer, PSTR("%sPIN: %3d "), start_string, pin); // digital pin number SERIAL_ECHO(buffer); print_port(pin); if (IS_ANALOG(pin)) { - sprintf(buffer, " (A%2d) ", int(pin - analogInputToDigitalPin(0))); // analog pin number + sprintf_P(buffer, PSTR(" (A%2d) "), int(pin - analogInputToDigitalPin(0))); // analog pin number SERIAL_ECHO(buffer); } else SERIAL_ECHO_SP(8); // add padding if not an analog pin } else { SERIAL_CHAR('.'); - SERIAL_ECHO_SP(25); // add padding if not the first instance found + SERIAL_ECHO_SP(26 + strlen(start_string)); // add padding if not the first instance found } name_mem_pointer = (char*)pgm_read_word(&pin_array[x][0]); for (uint8_t y = 0; y < 28; y++) { // always print pin name temp_char = pgm_read_byte(name_mem_pointer + y); - if (temp_char != 0) MYSERIAL.write(temp_char); + if (temp_char != 0) + MYSERIAL.write(temp_char); else { for (uint8_t i = 0; i < 28 - y; i++) MYSERIAL.write(' '); break; } } - if (pin_is_protected(pin) && !ignore) - SERIAL_ECHOPGM("protected "); - else { - if (!(pgm_read_byte(&pin_array[x][2]))) { - sprintf(buffer, "Analog in = %5d", analogRead(pin - analogInputToDigitalPin(0))); - SERIAL_ECHO(buffer); - } + if (extended) { + if (pin_is_protected(pin) && !ignore) + SERIAL_ECHOPGM("protected "); else { - if (!get_pinMode(pin)) { - //pinMode(pin, INPUT_PULLUP); // make sure input isn't floating - stopped doing this - // because this could interfere with inductive/capacitive - // sensors (high impedance voltage divider) and with PT100 amplifier - SERIAL_PROTOCOLPAIR("Input = ", digitalRead_mod(pin)); + #ifdef AVR_AT90USB1286_FAMILY // Teensy IDEs don't know about these pins so must use FASTIO + if (pin == 46) { + print_input_or_output(GET_OUTPUT(46)); + SERIAL_PROTOCOL(READ(46)); + } + else if (pin == 47) + print_input_or_output(GET_OUTPUT(47)); + SERIAL_PROTOCOL(READ(47)); + } + else + #endif + { + if (!(pgm_read_byte(&pin_array[x][2]))) { + sprintf_P(buffer, PSTR("Analog in = %5d"), analogRead(pin - analogInputToDigitalPin(0))); + SERIAL_ECHO(buffer); + } + else { + + if (!get_pinMode(pin)) { + //pinMode(pin, INPUT_PULLUP); // make sure input isn't floating - stopped doing this + // because this could interfere with inductive/capacitive + // sensors (high impedance voltage divider) and with PT100 amplifier + print_input_or_output(false); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + else if (pwm_status(pin)) { + // do nothing + } + else { + print_input_or_output(true); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + } + if (!multi_name_pin && extended) pwm_details(pin); // report PWM capabilities only on the first pass & only if doing an extended report } - else if (pwm_status(pin)) { - // do nothing - } - else SERIAL_PROTOCOLPAIR("Output = ", digitalRead_mod(pin)); } - if (!multi_name_pin && extended) pwm_details(pin); // report PWM capabilities only on the first pass & only if doing an extended report } SERIAL_EOL(); } // end of IF } // end of for loop if (!found) { - sprintf(buffer, "PIN: %3d ", pin); + sprintf_P(buffer, PSTR("%sPIN: %3d "), start_string, pin); SERIAL_ECHO(buffer); print_port(pin); if (IS_ANALOG(pin)) { - sprintf(buffer, " (A%2d) ", int(pin - analogInputToDigitalPin(0))); // analog pin number + sprintf_P(buffer, PSTR(" (A%2d) "), int(pin - analogInputToDigitalPin(0))); // analog pin number SERIAL_ECHO(buffer); } - else - SERIAL_ECHO_SP(8); // add padding if not an analog pin - SERIAL_ECHOPGM(""); - if (get_pinMode(pin)) { - SERIAL_PROTOCOL_SP(12); - SERIAL_PROTOCOLPAIR("Output = ", digitalRead_mod(pin)); - } else { - if (IS_ANALOG(pin)) { - sprintf(buffer, " Analog in = %5d", analogRead(pin - analogInputToDigitalPin(0))); - SERIAL_ECHO(buffer); - } - else - SERIAL_ECHO_SP(9); // add padding if not an analog pin + SERIAL_ECHO_SP(8); // add padding if not an analog pin + SERIAL_ECHOPGM(""); + if (extended) { + #ifdef AVR_AT90USB1286_FAMILY // Teensy IDEs don't know about these pins so must use FASTIO + if (pin == 46 || pin == 47) { + SERIAL_PROTOCOL_SP(12); + if (pin == 46) { + print_input_or_output(GET_OUTPUT(46)); + SERIAL_PROTOCOL(READ(46)); + } + else { + print_input_or_output(GET_OUTPUT(47)); + SERIAL_PROTOCOL(READ(47)); + } + } + else + #endif + { + if (get_pinMode(pin)) { + SERIAL_PROTOCOL_SP(12); + print_input_or_output(true); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + else { + if (IS_ANALOG(pin)) { + sprintf_P(buffer, PSTR(" Analog in = %5d"), analogRead(pin - analogInputToDigitalPin(0))); + SERIAL_ECHO(buffer); + SERIAL_ECHOPGM(" "); + } + else + SERIAL_ECHO_SP(12); // add padding if not an analog pin - SERIAL_PROTOCOLPAIR(" Input = ", digitalRead_mod(pin)); + print_input_or_output(false); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + //if (!pwm_status(pin)) SERIAL_CHAR(' '); // add padding if it's not a PWM pin + if (extended) pwm_details(pin); // report PWM capabilities only if doing an extended report + } + } + SERIAL_EOL(); } - //if (!pwm_status(pin)) SERIAL_CHAR(' '); // add padding if it's not a PWM pin - if (extended) pwm_details(pin); // report PWM capabilities only if doing an extended report - SERIAL_EOL(); } } - -inline void report_pin_state(int8_t pin) { - report_pin_state_extended(pin, false, false); -} diff --git a/Marlin/pinsDebug_Teensyduino.h b/Marlin/pinsDebug_Teensyduino.h index 187c190f68..797a2cd71f 100644 --- a/Marlin/pinsDebug_Teensyduino.h +++ b/Marlin/pinsDebug_Teensyduino.h @@ -25,21 +25,16 @@ // do not function the same as the other Arduino extensions // +#ifndef __PINSDEBUG_TEENSYDUINO_H__ +#define __PINSDEBUG_TEENSYDUINO_H__ -#define TEENSYDUINO_IDE +#undef NUM_DIGITAL_PINS +#define NUM_DIGITAL_PINS 48 // Teensy says 46 but FASTIO is 48 -//digitalPinToTimer(pin) function works like Arduino but Timers are not defined -#define TIMER0B 1 -#define TIMER1A 7 -#define TIMER1B 8 -#define TIMER1C 9 -#define TIMER2A 6 -#define TIMER2B 2 -#define TIMER3A 5 -#define TIMER3B 4 -#define TIMER3C 3 +// "digitalPinToPort" function just returns the pin number so need to create our own. +// Can't use the name "digitalPinToPort" for our own because it interferes with the +// FAST_PWM_FAN function if we do -// digitalPinToPort function just returns the pin number so need to create our own #define PA 1 #define PB 2 #define PC 3 @@ -47,9 +42,8 @@ #define PE 5 #define PF 6 -#undef digitalPinToPort -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { +const uint8_t PROGMEM digital_pin_to_port_PGM_Teensy[] = { PD, // 0 - PD0 - INT0 - PWM PD, // 1 - PD1 - INT1 - PWM PD, // 2 - PD2 - INT2 - RX @@ -100,7 +94,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = { PE, // 47 - PE3 (not defined in teensyduino) }; -#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToPort_Teensy(P) ( pgm_read_byte( digital_pin_to_port_PGM_Teensy + (P) ) ) // digitalPinToBitMask(pin) is OK @@ -108,3 +102,5 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = { // disable the PWMs so we can use it as is // portModeRegister(pin) is OK + +#endif // __PINSDEBUG_TEENSYDUINO_H__ diff --git a/Marlin/pinsDebug_list.h b/Marlin/pinsDebug_list.h index dfdd411046..90eaa1c620 100644 --- a/Marlin/pinsDebug_list.h +++ b/Marlin/pinsDebug_list.h @@ -353,22 +353,22 @@ #if defined(LCD_CONTRAST) && LCD_CONTRAST >= 0 REPORT_NAME_DIGITAL(LCD_CONTRAST, __LINE__ ) #endif -#if PIN_EXISTS(LCD) +#if defined(LCD_PINS_D4) && LCD_PINS_D4 >= 0 REPORT_NAME_DIGITAL(LCD_PINS_D4, __LINE__ ) #endif -#if PIN_EXISTS(LCD) +#if defined(LCD_PINS_D5) && LCD_PINS_D5 >= 0 REPORT_NAME_DIGITAL(LCD_PINS_D5, __LINE__ ) #endif -#if PIN_EXISTS(LCD) +#if defined(LCD_PINS_D6) && LCD_PINS_D6 >= 0 REPORT_NAME_DIGITAL(LCD_PINS_D6, __LINE__ ) #endif -#if PIN_EXISTS(LCD) +#if defined(LCD_PINS_D7) && LCD_PINS_D7 >= 0 REPORT_NAME_DIGITAL(LCD_PINS_D7, __LINE__ ) #endif -#if PIN_EXISTS(LCD) +#if defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE >= 0 REPORT_NAME_DIGITAL(LCD_PINS_ENABLE, __LINE__ ) #endif -#if PIN_EXISTS(LCD) +#if defined(LCD_PINS_RS) && LCD_PINS_RS >= 0 REPORT_NAME_DIGITAL(LCD_PINS_RS, __LINE__ ) #endif #if defined(LCD_SDSS) && LCD_SDSS >= 0 @@ -446,6 +446,18 @@ #if PIN_EXISTS(RAMPS_D9) REPORT_NAME_DIGITAL(RAMPS_D9_PIN, __LINE__ ) #endif +#if PIN_EXISTS(RGB_LED_R) + REPORT_NAME_DIGITAL(RGB_LED_R_PIN, __LINE__ ) +#endif +#if PIN_EXISTS(RGB_LED_G) + REPORT_NAME_DIGITAL(RGB_LED_G_PIN, __LINE__ ) +#endif +#if PIN_EXISTS(RGB_LED_B) + REPORT_NAME_DIGITAL(RGB_LED_B_PIN, __LINE__ ) +#endif +#if PIN_EXISTS(RGB_LED_W) + REPORT_NAME_DIGITAL(RGB_LED_W_PIN, __LINE__ ) +#endif #if PIN_EXISTS(RX_ENABLE) REPORT_NAME_DIGITAL(RX_ENABLE_PIN, __LINE__ ) #endif @@ -500,12 +512,21 @@ #if PIN_EXISTS(SLEEP_WAKE) REPORT_NAME_DIGITAL(SLEEP_WAKE_PIN, __LINE__ ) #endif +#if PIN_EXISTS(SOL0) + REPORT_NAME_DIGITAL(SOL0_PIN, __LINE__ ) +#endif #if PIN_EXISTS(SOL1) REPORT_NAME_DIGITAL(SOL1_PIN, __LINE__ ) #endif #if PIN_EXISTS(SOL2) REPORT_NAME_DIGITAL(SOL2_PIN, __LINE__ ) #endif +#if PIN_EXISTS(SOL3) + REPORT_NAME_DIGITAL(SOL3_PIN, __LINE__ ) +#endif +#if PIN_EXISTS(SOL4) + REPORT_NAME_DIGITAL(SOL4_PIN, __LINE__ ) +#endif #if defined(SPARE_IO) && SPARE_IO >= 0 REPORT_NAME_DIGITAL(SPARE_IO, __LINE__ ) #endif @@ -749,3 +770,4 @@ #if PIN_EXISTS(Z2_STEP) REPORT_NAME_DIGITAL(Z2_STEP_PIN, __LINE__ ) #endif +