Catch more LPC1768 pin conflicts (#17019)

Marlin/src/inc/Conditionals_post.h

@@ -40,9 +40,6 @@
   #define NOT_A_PIN 0 // For PINS_DEBUGGING
 #endif
 
-#define HAS_CLASSIC_JERK (ENABLED(CLASSIC_JERK) || IS_KINEMATIC)
-#define HAS_CLASSIC_E_JERK (ENABLED(CLASSIC_JERK) || DISABLED(LIN_ADVANCE))
-
 /**
  * Axis lengths and center
  */
@@ -579,99 +576,6 @@
   HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, \
   HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR, HEATER_6_USES_THERMISTOR, HEATER_7_USES_THERMISTOR )
 
-/**
- * Default hotend offsets, if not defined
- */
-#if HAS_HOTEND_OFFSET
-  #ifndef HOTEND_OFFSET_X
-    #define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
-  #endif
-  #ifndef HOTEND_OFFSET_Y
-    #define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
-  #endif
-  #ifndef HOTEND_OFFSET_Z
-    #define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
-  #endif
-#endif
-
-/**
- * ARRAY_BY_EXTRUDERS based on EXTRUDERS
- */
-#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
-#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1)
-
-/**
- * ARRAY_BY_HOTENDS based on HOTENDS
- */
-#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
-#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
-
-/**
- * Driver Timings
- * NOTE: Driver timing order is longest-to-shortest duration.
- *       Preserve this ordering when adding new drivers.
- */
-
-#ifndef MINIMUM_STEPPER_POST_DIR_DELAY
-  #if HAS_DRIVER(TB6560)
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 15000
-  #elif HAS_DRIVER(TB6600)
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 1500
-  #elif HAS_DRIVER(DRV8825)
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 650
-  #elif HAS_DRIVER(LV8729)
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 500
-  #elif HAS_DRIVER(A5984)
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 400
-  #elif HAS_DRIVER(A4988)
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 200
-  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 20
-  #else
-    #define MINIMUM_STEPPER_POST_DIR_DELAY 0   // Expect at least 10µS since one Stepper ISR must transpire
-  #endif
-#endif
-
-#ifndef MINIMUM_STEPPER_PRE_DIR_DELAY
-  #define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY
-#endif
-
-#ifndef MINIMUM_STEPPER_PULSE
-  #if HAS_DRIVER(TB6560)
-    #define MINIMUM_STEPPER_PULSE 30
-  #elif HAS_DRIVER(TB6600)
-    #define MINIMUM_STEPPER_PULSE 3
-  #elif HAS_DRIVER(DRV8825)
-    #define MINIMUM_STEPPER_PULSE 2
-  #elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984)
-    #define MINIMUM_STEPPER_PULSE 1
-  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
-    #define MINIMUM_STEPPER_PULSE 0
-  #elif HAS_DRIVER(LV8729)
-    #define MINIMUM_STEPPER_PULSE 0
-  #else
-    #define MINIMUM_STEPPER_PULSE 2
-  #endif
-#endif
-
-#ifndef MAXIMUM_STEPPER_RATE
-  #if HAS_DRIVER(TB6560)
-    #define MAXIMUM_STEPPER_RATE 15000
-  #elif HAS_DRIVER(TB6600)
-    #define MAXIMUM_STEPPER_RATE 150000
-  #elif HAS_DRIVER(DRV8825)
-    #define MAXIMUM_STEPPER_RATE 250000
-  #elif HAS_DRIVER(A4988)
-    #define MAXIMUM_STEPPER_RATE 500000
-  #elif HAS_DRIVER(LV8729)
-    #define MAXIMUM_STEPPER_RATE 1000000
-  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
-    #define MAXIMUM_STEPPER_RATE 5000000
-  #else
-    #define MAXIMUM_STEPPER_RATE 250000
-  #endif
-#endif
-
 /**
  * X_DUAL_ENDSTOPS endstop reassignment
  */
@@ -1522,6 +1426,7 @@
 #if !HAS_TEMP_SENSOR
   #undef AUTO_REPORT_TEMPERATURES
 #endif
+#define HAS_AUTO_REPORTING EITHER(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS)
 
 #if !HAS_AUTO_CHAMBER_FAN || AUTO_CHAMBER_IS_E
   #undef AUTO_POWER_CHAMBER_FAN
@@ -1618,20 +1523,6 @@
 
 #endif // HAS_MICROSTEPS
 
-#if !HAS_TEMP_SENSOR
-  #undef AUTO_REPORT_TEMPERATURES
-#endif
-
-#define HAS_AUTO_REPORTING EITHER(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS)
-
-/**
- * This setting is also used by M109 when trying to calculate
- * a ballpark safe margin to prevent wait-forever situation.
- */
-#ifndef EXTRUDE_MINTEMP
-  #define EXTRUDE_MINTEMP 170
-#endif
-
 /**
  * Heater signal inversion defaults
  */
@@ -2121,29 +2012,6 @@
   #define MAX_VFAT_ENTRIES (2)
 #endif
 
-// Set defaults for unspecified LED user colors
-#if ENABLED(LED_CONTROL_MENU)
-  #ifndef LED_USER_PRESET_RED
-    #define LED_USER_PRESET_RED       255
-  #endif
-  #ifndef LED_USER_PRESET_GREEN
-    #define LED_USER_PRESET_GREEN     255
-  #endif
-  #ifndef LED_USER_PRESET_BLUE
-    #define LED_USER_PRESET_BLUE      255
-  #endif
-  #ifndef LED_USER_PRESET_WHITE
-    #define LED_USER_PRESET_WHITE     0
-  #endif
-  #ifndef LED_USER_PRESET_BRIGHTNESS
-    #ifdef NEOPIXEL_BRIGHTNESS
-      #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
-    #else
-      #define LED_USER_PRESET_BRIGHTNESS 255
-    #endif
-  #endif
-#endif
-
 // Nozzle park for Delta
 #if BOTH(NOZZLE_PARK_FEATURE, DELTA)
   #undef NOZZLE_PARK_Z_FEEDRATE
@@ -2180,13 +2048,10 @@
 #endif
 
 // Defined here to catch the above defines
-#if ENABLED(SDCARD_SORT_ALPHA)
-  #define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
+#if ENABLED(SDCARD_SORT_ALPHA) && (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
+  #define HAS_FOLDER_SORTING 1
 #endif
 
-// If platform requires early initialization of watchdog to properly boot
-#define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM))
-
 #if HAS_SPI_LCD
   // Get LCD character width/height, which may be overridden by pins, configs, etc.
   #ifndef LCD_WIDTH
@@ -2223,14 +2088,3 @@
     #define INIT_SDCARD_ON_BOOT
   #endif
 #endif
-
-#if !NUM_SERIAL
-  #undef BAUD_RATE_GCODE
-#endif
-
-#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-  #undef Z_STEPPER_ALIGN_AMP
-#endif
-#ifndef Z_STEPPER_ALIGN_AMP
-  #define Z_STEPPER_ALIGN_AMP 1.0
-#endif