bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping

Browse Source 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
This commit is contained in:
etagle
2018-06-03 14:24:23 -03:00
committed by Scott Lahteine
parent 39a7e7720d
commit 6f14bcaa3e
120 changed files with 699 additions and 224 deletions
Download Patch File Download Diff File Expand all files Collapse all files

46
Marlin/src/module/stepper.cpp
View File

@@ -1309,8 +1309,20 @@ void Stepper::stepper_pulse_phase_isr() {
// If there is no current block, do nothing
if (!current_block) return;
// Count of pending loops and events for this iteration
const uint32_t pending_events = step_event_count - step_events_completed;
uint8_t events_to_do = MIN(pending_events, steps_per_isr);
// Just update the value we will get at the end of the loop
step_events_completed += events_to_do;
#if MINIMUM_STEPPER_PULSE
// Get the timer count and estimate the end of the pulse
hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
#endif
// Take multiple steps per interrupt (For high speed moves)
for (uint8_t i = steps_per_isr; i--;) {
do {
#define _APPLY_STEP(AXIS) AXIS ##_APPLY_STEP
#define _INVERT_STEP_PIN(AXIS) INVERT_## AXIS ##_STEP_PIN
@@ -1332,11 +1344,6 @@ void Stepper::stepper_pulse_phase_isr() {
} \
}while(0)
#if MINIMUM_STEPPER_PULSE > 0
// Get the timer count and estimate the end of the pulse
hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
#endif
// Pulse start
#if HAS_X_STEP
PULSE_START(X);
@@ -1382,11 +1389,11 @@ void Stepper::stepper_pulse_phase_isr() {
#endif
#endif // !LIN_ADVANCE
#if MINIMUM_STEPPER_PULSE > 0
// Just wait for the requested pulse time.
#if MINIMUM_STEPPER_PULSE
// Just wait for the requested pulse duration
while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ }
// Get the timer count and estimate the end of the pulse for the OFF phase
pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
// Add to the value, the value needed for the pulse end and ensuring the maximum driver rate is enforced
pulse_end += hal_timer_t(MIN_STEPPER_PULSE_CYCLES) - hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
#endif
// Pulse stop
@@ -1413,15 +1420,20 @@ void Stepper::stepper_pulse_phase_isr() {
#endif
#endif // !LIN_ADVANCE
// If all events done, break loop now
if (++step_events_completed >= step_event_count) break;
// Decrement the count of pending pulses to do
--events_to_do;
#if MINIMUM_STEPPER_PULSE
// For minimum pulse time wait after stopping pulses also
// Just wait for the requested pulse time.
if (i) while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ }
if (events_to_do) {
// Just wait for the requested pulse duration
while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ }
// Add to the value, the time that the pulse must be active (to be used on the next loop)
pulse_end += hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
}
#endif
} // steps_loop
} while (events_to_do);
}
// This is the last half of the stepper interrupt: This one processes and
@@ -1819,8 +1831,8 @@ uint32_t Stepper::stepper_block_phase_isr() {
#if MINIMUM_STEPPER_PULSE
// Just wait for the requested pulse duration
while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ }
// Get the timer count and estimate the end of the pulse for the OFF phase
pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
// Add to the value, the value needed for the pulse end and ensuring the maximum driver rate is enforced
pulse_end += hal_timer_t(MIN_STEPPER_PULSE_CYCLES) - hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
#endif
LA_steps < 0 ? ++LA_steps : --LA_steps;