FTDI/EVE, pins cleanup for SKR E3/DIP (#17990)

This commit is contained in:
Gustavo Alvarez 2020-05-13 21:22:03 +02:00 committed by GitHub
parent 104d020222
commit 6d92f56582
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 53 additions and 86 deletions

View File

@ -1381,8 +1381,6 @@
//#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
//#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
//#define S6_TFT_PINMAP // FYSETC S6 pin mapping //#define S6_TFT_PINMAP // FYSETC S6 pin mapping
//#define E3_EXP1_PINMAP // E3 type boards (SKR E3/DIP, and Stock boards) EXP1 pin mapping
//#define GENERIC_EXP2_PINMAP // GENERIC EXP2 pin mapping
//#define OTHER_PIN_LAYOUT // Define pins manually below //#define OTHER_PIN_LAYOUT // Define pins manually below
#if ENABLED(OTHER_PIN_LAYOUT) #if ENABLED(OTHER_PIN_LAYOUT)

View File

@ -154,12 +154,3 @@
#define CLCD_SPI_EXTRA_CS SDSS #define CLCD_SPI_EXTRA_CS SDSS
#endif #endif
#endif #endif
#if EITHER(E3_EXP1_PINMAP, GENERIC_EXP2_PINMAP)
#ifndef __MARLIN_FIRMWARE__
#error "This pin mapping requires Marlin."
#endif
#define CLCD_MOD_RESET BTN_EN1
#define CLCD_SPI_CS LCD_PINS_RS
#endif

View File

@ -759,11 +759,8 @@
#define BEEPER_PIN 37 #define BEEPER_PIN 37
#define BTN_EN1 31
#define LCD_PINS_RS 33
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define KILL_PIN -1 #define CLCD_MOD_RESET 31
#define CLCD_SPI_CS 33
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 #endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050

View File

@ -172,39 +172,31 @@
* EXP1 * EXP1
*/ */
#define EXPA1_03_PIN PB7
#define EXPA1_04_PIN PB8
#define EXPA1_05_PIN PB9
#define EXPA1_06_PIN PA10
#define EXPA1_07_PIN -1
#define EXPA1_08_PIN PA9
#define EXPA1_09_PIN PB6
#define EXPA1_10_PIN PA15
#if HAS_SPI_LCD #if HAS_SPI_LCD
#if ENABLED(CR10_STOCKDISPLAY) #if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN EXPA1_10_PIN #define BEEPER_PIN PA15
#define BTN_ENC EXPA1_09_PIN #define BTN_ENC PB6
#define BTN_EN1 EXPA1_08_PIN #define BTN_EN1 PA9
#define BTN_EN2 EXPA1_06_PIN #define BTN_EN2 PA10
#define LCD_PINS_RS EXPA1_04_PIN #define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE EXPA1_03_PIN #define LCD_PINS_ENABLE PB7
#define LCD_PINS_D4 EXPA1_05_PIN #define LCD_PINS_D4 PB9
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue." #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
#define LCD_PINS_RS EXPA1_05_PIN #define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE EXPA1_09_PIN #define LCD_PINS_ENABLE PB6
#define LCD_PINS_D4 EXPA1_04_PIN #define LCD_PINS_D4 PB8
#define LCD_PINS_D5 EXPA1_06_PIN #define LCD_PINS_D5 PA10
#define LCD_PINS_D6 EXPA1_08_PIN #define LCD_PINS_D6 PA9
#define LCD_PINS_D7 EXPA1_10_PIN #define LCD_PINS_D7 PA15
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
@ -220,14 +212,14 @@
* EXP1 * EXP1
*/ */
#define BTN_ENC EXPA1_09_PIN #define BTN_ENC PB6
#define BTN_EN1 EXPA1_08_PIN #define BTN_EN1 PA9
#define BTN_EN2 EXPA1_06_PIN #define BTN_EN2 PA10
#define DOGLCD_CS EXPA1_04_PIN #define DOGLCD_CS PB8
#define DOGLCD_A0 EXPA1_05_PIN #define DOGLCD_A0 PB9
#define DOGLCD_SCK EXPA1_10_PIN #define DOGLCD_SCK PA15
#define DOGLCD_MOSI EXPA1_03_PIN #define DOGLCD_MOSI PB7
#define FORCE_SOFT_SPI #define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1 #define LCD_BACKLIGHT_PIN -1
@ -272,10 +264,10 @@
#define CLCD_SPI_BUS 1 // SPI1 connector #define CLCD_SPI_BUS 1 // SPI1 connector
#define BEEPER_PIN EXPA1_09_PIN #define BEEPER_PIN PB6
#define BTN_EN1 EXPA1_08_PIN #define CLCD_MOD_RESET PA9
#define LCD_PINS_RS EXPA1_04_PIN #define CLCD_SPI_CS PA8
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 #endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
@ -292,8 +284,8 @@
#endif #endif
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD)
#define SD_DETECT_PIN EXPA1_10_PIN #define SD_DETECT_PIN PA15
#define SS_PIN EXPA1_06_PIN #define SS_PIN PA10
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP." #error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP."
#endif #endif

View File

@ -112,39 +112,30 @@
* EXP1 * EXP1
*/ */
#define EXPA1_03_PIN PB7
#define EXPA1_04_PIN PB8
#define EXPA1_05_PIN PB9
#define EXPA1_06_PIN PA10
#define EXPA1_07_PIN -1
#define EXPA1_08_PIN PA9
#define EXPA1_09_PIN PB6
#define EXPA1_10_PIN PB5
#if HAS_SPI_LCD #if HAS_SPI_LCD
#if ENABLED(CR10_STOCKDISPLAY) #if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN EXPA1_10_PIN #define BEEPER_PIN PB5
#define BTN_ENC EXPA1_09_PIN #define BTN_ENC PB6
#define BTN_EN1 EXPA1_08_PIN #define BTN_EN1 PA9
#define BTN_EN2 EXPA1_06_PIN #define BTN_EN2 PA10
#define LCD_PINS_RS EXPA1_04_PIN #define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE EXPA1_03_PIN #define LCD_PINS_ENABLE PB7
#define LCD_PINS_D4 EXPA1_05_PIN #define LCD_PINS_D4 PB9
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue." #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
#define LCD_PINS_RS EXPA1_05_PIN #define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE EXPA1_09_PIN #define LCD_PINS_ENABLE PB6
#define LCD_PINS_D4 EXPA1_04_PIN #define LCD_PINS_D4 PB8
#define LCD_PINS_D5 EXPA1_06_PIN #define LCD_PINS_D5 PA10
#define LCD_PINS_D6 EXPA1_08_PIN #define LCD_PINS_D6 PA9
#define LCD_PINS_D7 EXPA1_10_PIN #define LCD_PINS_D7 PB5
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
@ -160,14 +151,14 @@
* EXP1 * EXP1
*/ */
#define BTN_ENC EXPA1_09_PIN #define BTN_ENC PB6
#define BTN_EN1 EXPA1_08_PIN #define BTN_EN1 PA9
#define BTN_EN2 EXPA1_06_PIN #define BTN_EN2 PA10
#define DOGLCD_CS EXPA1_04_PIN #define DOGLCD_CS PB8
#define DOGLCD_A0 EXPA1_05_PIN #define DOGLCD_A0 PB9
#define DOGLCD_SCK EXPA1_10_PIN #define DOGLCD_SCK PB5
#define DOGLCD_MOSI EXPA1_03_PIN #define DOGLCD_MOSI PB7
#define FORCE_SOFT_SPI #define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1 #define LCD_BACKLIGHT_PIN -1
@ -212,12 +203,10 @@
#define CLCD_SPI_BUS 1 // SPI1 connector #define CLCD_SPI_BUS 1 // SPI1 connector
#define BEEPER_PIN EXPA1_09_PIN #define BEEPER_PIN PB6
#define BTN_EN1 EXPA1_08_PIN #define CLCD_MOD_RESET PA9
#define LCD_PINS_RS EXPA1_04_PIN #define CLCD_SPI_CS PB8
#define LCD_PINS_ENABLE EXPA1_03_PIN
#define LCD_PINS_D4 EXPA1_05_PIN
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 #endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
@ -234,8 +223,8 @@
#endif #endif
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD)
#define SD_DETECT_PIN EXPA1_10_PIN #define SD_DETECT_PIN PB5
#define SS_PIN EXPA1_06_PIN #define SS_PIN PA10
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR Mini E3." #error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
#endif #endif