Fix Baby Stepping on 32-Bit platforms (#8001)
Also, Max7219 debug code was used for this effort. It has been improved and hardened.
This commit is contained in:
@ -125,7 +125,7 @@
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
// Displayed in the LCD "Ready" message
|
||||
#define CUSTOM_MACHINE_NAME "FT-2020 v2"
|
||||
#define CUSTOM_MACHINE_NAME "FT-2020 v3"
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
@ -691,6 +691,7 @@
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_SPEED 7500
|
||||
|
||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||
|
||||
@ -750,6 +751,7 @@
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR true
|
||||
|
||||
// Enable this option for Toshiba stepper drivers
|
||||
//#define CONFIG_STEPPERS_TOSHIBA
|
||||
|
||||
@ -789,16 +791,7 @@
|
||||
#define Y_MAX_POS 182
|
||||
#define Z_MAX_POS 175
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
*
|
||||
* - Prevent moves outside the set machine bounds.
|
||||
* - Individual axes can be disabled, if desired.
|
||||
* - X and Y only apply to Cartesian robots.
|
||||
* - Use 'M211' to set software endstops on/off or report current state
|
||||
*/
|
||||
|
||||
// Min software endstops curtail movement below minimum coordinate bounds
|
||||
// If enabled, axes won't move below MIN_POS in response to movement commands.
|
||||
//#define MIN_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
|
||||
#define MIN_SOFTWARE_ENDSTOP_X
|
||||
@ -806,7 +799,7 @@
|
||||
#define MIN_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
// Max software endstops curtail movement above maximum coordinate bounds
|
||||
// If enabled, axes won't move above MAX_POS in response to movement commands.
|
||||
#define MAX_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#define MAX_SOFTWARE_ENDSTOP_X
|
||||
@ -939,8 +932,6 @@
|
||||
#define ABL_PROBE_PT_3_X 170
|
||||
#define ABL_PROBE_PT_3_Y 10
|
||||
|
||||
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
@ -1681,12 +1672,12 @@
|
||||
// leaving it undefined or defining as 0 will disable the servo subsystem
|
||||
// If unsure, leave commented / disabled
|
||||
//
|
||||
#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command
|
||||
#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
|
||||
|
||||
// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
|
||||
// 300ms is a good value but you can try less delay.
|
||||
// If the servo can't reach the requested position, increase it.
|
||||
#define SERVO_DELAY { 500, 500 }
|
||||
#define SERVO_DELAY { 500 }
|
||||
|
||||
// Servo deactivation
|
||||
//
|
||||
|
Reference in New Issue
Block a user