bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Shorter paths to HAL, ExtUI (#17156)

Browse Source
This commit is contained in:
Scott Lahteine
2020-03-13 16:29:29 -05:00
committed by GitHub
parent ad980a72f7
commit 6bead0c1b0
600 changed files with 228 additions and 227 deletions
Download Patch File Download Diff File Expand all files Collapse all files

120
Marlin/src/HAL/TEENSY35_36/HAL.cpp Normal file
View File

@ -0,0 +1,120 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Description: HAL for Teensy35 (MK64FX512)
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "HAL.h"
#include "../shared/Delay.h"
#include <Wire.h>
uint16_t HAL_adc_result, HAL_adc_select;
static const uint8_t pin2sc1a[] = {
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 3, 19+128, 14+128, 15+128, // 0-13 -> A0-A13
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 are A0-A9
255, 255, 255, 255, 255, 255, 255, // 24-30 are digital only
14+128, 15+128, 17, 18, 4+128, 5+128, 6+128, 7+128, 17+128, // 31-39 are A12-A20
255, 255, 255, 255, 255, 255, 255, 255, 255, // 40-48 are digital only
10+128, 11+128, // 49-50 are A23-A24
255, 255, 255, 255, 255, 255, 255, // 51-57 are digital only
255, 255, 255, 255, 255, 255, // 58-63 (sd card pins) are digital only
3, 19+128, // 64-65 are A10-A11
23, 23+128,// 66-67 are A21-A22 (DAC pins)
1, 1+128, // 68-69 are A25-A26 (unused USB host port on Teensy 3.5)
26, // 70 is Temperature Sensor
18+128 // 71 is Vref
};
/*
// disable interrupts
void cli() { noInterrupts(); }
// enable interrupts
void sei() { interrupts(); }
*/
void HAL_adc_init() {
analog_init();
while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
while (ADC1_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
NVIC_ENABLE_IRQ(IRQ_FTM1);
}
void HAL_clear_reset_source() { }
uint8_t HAL_get_reset_source() {
switch (RCM_SRS0) {
case 128: return RST_POWER_ON; break;
case 64: return RST_EXTERNAL; break;
case 32: return RST_WATCHDOG; break;
// case 8: return RST_LOSS_OF_LOCK; break;
// case 4: return RST_LOSS_OF_CLOCK; break;
// case 2: return RST_LOW_VOLTAGE; break;
}
return 0;
}
extern "C" {
extern char __bss_end;
extern char __heap_start;
extern void* __brkval;
int freeMemory() {
int free_memory;
if ((int)__brkval == 0)
free_memory = ((int)&free_memory) - ((int)&__bss_end);
else
free_memory = ((int)&free_memory) - ((int)__brkval);
return free_memory;
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
const uint16_t pin = pin2sc1a[adc_pin];
if (pin == 0xFF) {
// Digital only
HAL_adc_select = -1;
}
else if (pin & 0x80) {
HAL_adc_select = 1;
ADC1_SC1A = pin & 0x7F;
}
else {
HAL_adc_select = 0;
ADC0_SC1A = pin;
}
}
uint16_t HAL_adc_get_result() {
switch (HAL_adc_select) {
case 0: return ADC0_RA;
case 1: return ADC1_RA;
}
return 0;
}
#endif // __MK64FX512__ || __MK66FX1M0__

129
Marlin/src/HAL/TEENSY35_36/HAL.h Normal file
View File

@ -0,0 +1,129 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Description: HAL for Teensy 3.5 and Teensy 3.6
*/
#define CPU_32_BIT
#include "../shared/Marduino.h"
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include "timers.h"
#include <stdint.h>
#include <util/atomic.h>
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)
#define ST7920_DELAY_3 DELAY_NS(750)
// ------------------------
// Defines
// ------------------------
#define IS_32BIT_TEENSY (defined(__MK64FX512__) || defined(__MK66FX1M0__))
#define IS_TEENSY35 defined(__MK64FX512__)
#define IS_TEENSY36 defined(__MK66FX1M0__)
#define NUM_SERIAL 1
#if SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 Serial3
#endif
#define HAL_SERVO_LIB libServo
typedef int8_t pin_t;
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_primask())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#undef sq
#define sq(x) ((x)*(x))
#ifndef strncpy_P
#define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
#endif
// Fix bug in pgm_read_ptr
#undef pgm_read_ptr
#define pgm_read_ptr(addr) (*((void**)(addr)))
// Add type-checking to pgm_read_word
#undef pgm_read_word
#define pgm_read_word(addr) (*((uint16_t*)(addr)))
inline void HAL_init() {}
// Clear reset reason
void HAL_clear_reset_source();
// Reset reason
uint8_t HAL_get_reset_source();
FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
extern "C" {
int freeMemory();
}
#pragma GCC diagnostic pop
// ADC
void HAL_adc_init();
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_ADC_RESOLUTION 10
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
#define HAL_ANALOG_SELECT(pin)
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)

120
Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp Normal file
View File

@ -0,0 +1,120 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "HAL.h"
#include <SPI.h>
#include <pins_arduino.h>
#include "spi_pins.h"
#include "../../core/macros.h"
static SPISettings spiConfig;
void spiBegin() {
#if !PIN_EXISTS(SS)
#error SS_PIN not defined!
#endif
OUT_WRITE(SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN);
SET_INPUT(MISO_PIN);
SET_OUTPUT(MOSI_PIN);
#if 0 && DISABLED(SOFTWARE_SPI)
// set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH);
#endif
// set a default rate
spiInit(SPI_HALF_SPEED); // 1
#endif
}
void spiInit(uint8_t spiRate) {
// Use Marlin data-rates
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = 10000000; break;
case SPI_HALF_SPEED: clock = 5000000; break;
case SPI_QUARTER_SPEED: clock = 2500000; break;
case SPI_EIGHTH_SPEED: clock = 1250000; break;
case SPI_SPEED_5: clock = 625000; break;
case SPI_SPEED_6: clock = 312500; break;
default:
clock = 4000000; // Default from the SPI libarary
}
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
SPI.begin();
}
uint8_t spiRec() {
SPI.beginTransaction(spiConfig);
uint8_t returnByte = SPI.transfer(0xFF);
SPI.endTransaction();
return returnByte;
//SPDR = 0xFF;
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//return SPDR;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transfer(buf, nbyte);
SPI.endTransaction();
//if (nbyte-- == 0) return;
// SPDR = 0xFF;
//for (uint16_t i = 0; i < nbyte; i++) {
// while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
// buf[i] = SPDR;
// SPDR = 0xFF;
//}
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//buf[nbyte] = SPDR;
}
void spiSend(uint8_t b) {
SPI.beginTransaction(spiConfig);
SPI.transfer(b);
SPI.endTransaction();
//SPDR = b;
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPI.beginTransaction(spiConfig);
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
while (!TEST(SPSR, SPIF)) { /* nada */ };
SPDR = buf[i];
while (!TEST(SPSR, SPIF)) { /* nada */ };
SPDR = buf[i + 1];
}
while (!TEST(SPSR, SPIF)) { /* nada */ };
SPI.endTransaction();
}
// Begin SPI transaction, set clock, bit order, data mode
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, bitOrder, dataMode);
SPI.beginTransaction(spiConfig);
}
#endif // __MK64FX512__ || __MK66FX1M0__

57
Marlin/src/HAL/TEENSY35_36/Servo.cpp Normal file
View File

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "Servo.h"
uint8_t servoPin[MAX_SERVOS] = { 0 };
int8_t libServo::attach(const int inPin) {
if (servoIndex >= MAX_SERVOS) return -1;
if (inPin > 0) servoPin[servoIndex] = inPin;
return super::attach(servoPin[servoIndex]);
}
int8_t libServo::attach(const int inPin, const int inMin, const int inMax) {
if (inPin > 0) servoPin[servoIndex] = inPin;
return super::attach(servoPin[servoIndex], inMin, inMax);
}
void libServo::move(const int value) {
constexpr uint16_t servo_delay[] = SERVO_DELAY;
static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
if (attach(0) >= 0) {
write(value);
safe_delay(servo_delay[servoIndex]);
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
detach();
#endif
}
}
#endif // HAS_SERVOS
#endif // __MK64FX512__ || __MK66FX1M0__

37
Marlin/src/HAL/TEENSY35_36/Servo.h Normal file
View File

@ -0,0 +1,37 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <Servo.h>
// Inherit and expand on core Servo library
class libServo : public Servo {
public:
int8_t attach(const int pin);
int8_t attach(const int pin, const int min, const int max);
void move(const int value);
private:
typedef Servo super;
uint16_t min_ticks;
uint16_t max_ticks;
uint8_t servoIndex; // Index into the channel data for this servo
};

88
Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h Normal file
View File

@ -0,0 +1,88 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the temperature-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate an 'external interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#include "../../module/endstops.h"
// One ISR for all EXT-Interrupts
void endstop_ISR() { endstops.update(); }
/**
* Endstop interrupts for Due based targets.
* On Due, all pins support external interrupt capability.
*/
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z4_MAX
_ATTACH(Z4_MAX_PIN);
#endif
#if HAS_Z4_MIN
_ATTACH(Z4_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
_ATTACH(Z_MIN_PROBE_PIN);
#endif
}

97
Marlin/src/HAL/TEENSY35_36/fastio.h Normal file
View File

@ -0,0 +1,97 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Fast I/O Routines for Teensy 3.5 and Teensy 3.6
* Use direct port manipulation to save scads of processor time.
* Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
*/
#ifndef MASK
#define MASK(PIN) (1 << PIN)
#endif
#define GPIO_BITBAND_ADDR(reg, bit) (((uint32_t)&(reg) - 0x40000000) * 32 + (bit) * 4 + 0x42000000)
#define GPIO_BITBAND(reg, bit) (*(uint32_t *)GPIO_BITBAND_ADDR((reg), (bit)))
/**
* Magic I/O routines
*
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
#define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)
#define _WRITE(P,V) do{ \
if (V) CORE_PIN ## P ## _PORTSET = CORE_PIN ## P ## _BITMASK; \
else CORE_PIN ## P ## _PORTCLEAR = CORE_PIN ## P ## _BITMASK; \
}while(0)
#define _TOGGLE(P) (*(&(CORE_PIN ## P ## _PORTCLEAR)+1) = CORE_PIN ## P ## _BITMASK)
#define _SET_INPUT(P) do{ \
CORE_PIN ## P ## _CONFIG = PORT_PCR_MUX(1); \
GPIO_BITBAND(CORE_PIN ## P ## _DDRREG , CORE_PIN ## P ## _BIT) = 0; \
}while(0)
#define _SET_OUTPUT(P) do{ \
CORE_PIN ## P ## _CONFIG = PORT_PCR_MUX(1)|PORT_PCR_SRE|PORT_PCR_DSE; \
GPIO_BITBAND(CORE_PIN ## P ## _DDRREG , CORE_PIN ## P ## _BIT) = 1; \
}while(0)
#define _SET_INPUT_PULLUP(P) do{ \
CORE_PIN ## P ## _CONFIG = PORT_PCR_MUX(1) | PORT_PCR_PE | PORT_PCR_PS; \
GPIO_BITBAND(CORE_PIN ## P ## _DDRREG , CORE_PIN ## P ## _BIT) = 0; \
}while(0)
#define _IS_INPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0)
#define _IS_OUTPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0)
#define READ(IO) _READ(IO)
#define WRITE(IO,V) _WRITE(IO,V)
#define TOGGLE(IO) _TOGGLE(IO)
#define SET_INPUT(IO) _SET_INPUT(IO)
#define SET_INPUT_PULLUP(IO) _SET_INPUT_PULLUP(IO)
#define SET_OUTPUT(IO) _SET_OUTPUT(IO)
#define SET_PWM(IO) SET_OUTPUT(IO)
#define IS_INPUT(IO) _IS_INPUT(IO)
#define IS_OUTPUT(IO) _IS_OUTPUT(IO)
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
#define PWM_PIN(P) digitalPinHasPWM(P)
/**
* Ports, functions, and pins
*/
#define DIO0_PIN 8

22
Marlin/src/HAL/TEENSY35_36/inc/Conditionals_LCD.h Normal file
View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

22
Marlin/src/HAL/TEENSY35_36/inc/Conditionals_adv.h Normal file
View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

22
Marlin/src/HAL/TEENSY35_36/inc/Conditionals_post.h Normal file
View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

38
Marlin/src/HAL/TEENSY35_36/inc/SanityCheck.h Normal file
View File

@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Test TEENSY35_36 specific configuration values for errors at compile-time.
*/
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for Teensy 3.5/3.6. Disable EMERGENCY_PARSER to continue."
#endif
#if ENABLED(FAST_PWM_FAN)
#error "FAST_PWM_FAN is not yet implemented for this platform."
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#endif

70
Marlin/src/HAL/TEENSY35_36/persistent_store_eeprom.cpp Normal file
View File

@ -0,0 +1,70 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "../../inc/MarlinConfig.h"
#if ENABLED(EEPROM_SETTINGS)
#include "../shared/persistent_store_api.h"
#include <avr/eeprom.h>
bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
eeprom_write_byte(p, v);
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
}
}
crc16(crc, &v, 1);
pos++;
value++;
};
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
uint8_t c = eeprom_read_byte((uint8_t*)pos);
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false;
}
size_t PersistentStore::capacity() { return E2END + 1; }
#endif // EEPROM_SETTINGS
#endif // __MK64FX512__ || __MK66FX1M0__

104
Marlin/src/HAL/TEENSY35_36/pinsDebug.h Normal file
View File

@ -0,0 +1,104 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
#define FTM0_CH0_PIN 22
#define FTM0_CH1_PIN 23
#define FTM0_CH2_PIN 9
#define FTM0_CH3_PIN 10
#define FTM0_CH4_PIN 6
#define FTM0_CH5_PIN 20
#define FTM0_CH6_PIN 21
#define FTM0_CH7_PIN 5
#define FTM1_CH0_PIN 3
#define FTM1_CH1_PIN 4
#define FTM2_CH0_PIN 29
#define FTM2_CH1_PIN 30
#define FTM3_CH0_PIN 2
#define FTM3_CH1_PIN 14
#define FTM3_CH2_PIN 7
#define FTM3_CH3_PIN 8
#define FTM3_CH4_PIN 35
#define FTM3_CH5_PIN 36
#define FTM3_CH6_PIN 37
#define FTM3_CH7_PIN 38
#ifdef __MK66FX1M0__ // Teensy3.6
#define TPM1_CH0_PIN 16
#define TPM1_CH1_PIN 17
#endif
#define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && (P) <= analogInputToDigitalPin(9)) || ((P) >= analogInputToDigitalPin(12) && (P) <= analogInputToDigitalPin(20))
void HAL_print_analog_pin(char buffer[], int8_t pin) {
if (pin <= 23) sprintf_P(buffer, PSTR("(A%2d) "), int(pin - 14));
else if (pin <= 39) sprintf_P(buffer, PSTR("(A%2d) "), int(pin - 19));
}
void HAL_analog_pin_state(char buffer[], int8_t pin) {
if (pin <= 23) sprintf_P(buffer, PSTR("Analog in =% 5d"), analogRead(pin - 14));
else if (pin <= 39) sprintf_P(buffer, PSTR("Analog in =% 5d"), analogRead(pin - 19));
}
#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM: %4d"), 22); SERIAL_ECHO(buffer); }while(0)
#define FTM_CASE(N,Z) \
case FTM##N##_CH##Z##_PIN: \
if (FTM##N##_C##Z##V) { \
PWM_PRINT(FTM##N##_C##Z##V); \
return true; \
} else return false
/**
* Print a pin's PWM status.
* Return true if it's currently a PWM pin.
*/
bool HAL_pwm_status(int8_t pin) {
char buffer[20]; // for the sprintf statements
switch (pin) {
FTM_CASE(0,0);
FTM_CASE(0,1);
FTM_CASE(0,2);
FTM_CASE(0,3);
FTM_CASE(0,4);
FTM_CASE(0,5);
FTM_CASE(0,6);
FTM_CASE(0,7);
FTM_CASE(1,0);
FTM_CASE(1,1);
FTM_CASE(2,0);
FTM_CASE(2,1);
FTM_CASE(3,0);
FTM_CASE(3,1);
FTM_CASE(3,2);
FTM_CASE(3,3);
FTM_CASE(3,4);
FTM_CASE(3,5);
FTM_CASE(3,6);
FTM_CASE(3,7);
case NOT_ON_TIMER:
default:
return false;
}
SERIAL_ECHOPGM(" ");
}
static void HAL_pwm_details(uint8_t pin) { /* TODO */ }

27
Marlin/src/HAL/TEENSY35_36/spi_pins.h Normal file
View File

@ -0,0 +1,27 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define SCK_PIN 13
#define MISO_PIN 12
#define MOSI_PIN 11
#define SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29

115
Marlin/src/HAL/TEENSY35_36/timers.cpp Normal file
View File

@ -0,0 +1,115 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Teensy3.5 __MK64FX512__
* Teensy3.6 __MK66FX1M0__
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "HAL.h"
#include "timers.h"
/** \brief Instruction Synchronization Barrier
Instruction Synchronization Barrier flushes the pipeline in the processor,
so that all instructions following the ISB are fetched from cache or
memory, after the instruction has been completed.
*/
FORCE_INLINE static void __ISB() {
__asm__ __volatile__("isb 0xF":::"memory");
}
/** \brief Data Synchronization Barrier
This function acts as a special kind of Data Memory Barrier.
It completes when all explicit memory accesses before this instruction complete.
*/
FORCE_INLINE static void __DSB() {
__asm__ __volatile__("dsb 0xF":::"memory");
}
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
switch (timer_num) {
case 0:
FTM0_MODE = FTM_MODE_WPDIS | FTM_MODE_FTMEN;
FTM0_SC = 0x00; // Set this to zero before changing the modulus
FTM0_CNT = 0x0000; // Reset the count to zero
FTM0_MOD = 0xFFFF; // max modulus = 65535
FTM0_C0V = (FTM0_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value
FTM0_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM0_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 8
FTM0_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA;
break;
case 1:
FTM1_MODE = FTM_MODE_WPDIS | FTM_MODE_FTMEN; // Disable write protection, Enable FTM1
FTM1_SC = 0x00; // Set this to zero before changing the modulus
FTM1_CNT = 0x0000; // Reset the count to zero
FTM1_MOD = 0xFFFF; // max modulus = 65535
FTM1_C0V = (FTM1_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value 65535
FTM1_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM1_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 4
FTM1_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA;
break;
}
}
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
switch (timer_num) {
case 0: NVIC_ENABLE_IRQ(IRQ_FTM0); break;
case 1: NVIC_ENABLE_IRQ(IRQ_FTM1); break;
}
}
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
switch (timer_num) {
case 0: NVIC_DISABLE_IRQ(IRQ_FTM0); break;
case 1: NVIC_DISABLE_IRQ(IRQ_FTM1); break;
}
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
switch (timer_num) {
case 0: return NVIC_IS_ENABLED(IRQ_FTM0);
case 1: return NVIC_IS_ENABLED(IRQ_FTM1);
}
return false;
}
void HAL_timer_isr_prologue(const uint8_t timer_num) {
switch (timer_num) {
case 0:
FTM0_CNT = 0x0000;
FTM0_SC &= ~FTM_SC_TOF; // Clear FTM Overflow flag
FTM0_C0SC &= ~FTM_CSC_CHF; // Clear FTM Channel Compare flag
break;
case 1:
FTM1_CNT = 0x0000;
FTM1_SC &= ~FTM_SC_TOF; // Clear FTM Overflow flag
FTM1_C0SC &= ~FTM_CSC_CHF; // Clear FTM Channel Compare flag
break;
}
}
#endif // Teensy3.5 or Teensy3.6

103
Marlin/src/HAL/TEENSY35_36/timers.h Normal file
View File

@ -0,0 +1,103 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/**
* Description: HAL for
* Teensy3.5 (__MK64FX512__)
* Teensy3.6 (__MK66FX1M0__)
*/
#include <stdint.h>
// ------------------------
// Defines
// ------------------------
#define FORCE_INLINE __attribute__((always_inline)) inline
typedef uint32_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF
#define FTM0_TIMER_PRESCALE 8
#define FTM1_TIMER_PRESCALE 4
#define FTM0_TIMER_PRESCALE_BITS 0b011
#define FTM1_TIMER_PRESCALE_BITS 0b010
#define FTM0_TIMER_RATE (F_BUS / FTM0_TIMER_PRESCALE) // 60MHz / 8 = 7500kHz
#define FTM1_TIMER_RATE (F_BUS / FTM1_TIMER_PRESCALE) // 60MHz / 4 = 15MHz
#define HAL_TIMER_RATE (FTM0_TIMER_RATE)
#define STEP_TIMER_NUM 0
#define TEMP_TIMER_NUM 1
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#define TEMP_TIMER_FREQUENCY 1000
#define STEPPER_TIMER_RATE HAL_TIMER_RATE
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)
#define STEPPER_TIMER_PRESCALE (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US)
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#define HAL_STEP_TIMER_ISR() extern "C" void ftm0_isr() //void TC3_Handler()
#define HAL_TEMP_TIMER_ISR() extern "C" void ftm1_isr() //void TC4_Handler()
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
switch (timer_num) {
case 0: FTM0_C0V = compare; break;
case 1: FTM1_C0V = compare; break;
}
}
FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
switch (timer_num) {
case 0: return FTM0_C0V;
case 1: return FTM1_C0V;
}
return 0;
}
FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
switch (timer_num) {
case 0: return FTM0_CNT;
case 1: return FTM1_CNT;
}
return 0;
}
void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
void HAL_timer_isr_prologue(const uint8_t timer_num);
#define HAL_timer_isr_epilogue(TIMER_NUM)

39
Marlin/src/HAL/TEENSY35_36/watchdog.cpp Normal file
View File

@ -0,0 +1,39 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
void watchdog_init() {
WDOG_TOVALH = 0;
WDOG_TOVALL = 4000;
WDOG_STCTRLH = WDOG_STCTRLH_WDOGEN;
}
#endif // USE_WATCHDOG
#endif // __MK64FX512__ || __MK66FX1M0__

30
Marlin/src/HAL/TEENSY35_36/watchdog.h Normal file
View File

@ -0,0 +1,30 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
void watchdog_init();
inline void HAL_watchdog_refresh() {
// Watchdog refresh sequence
WDOG_REFRESH = 0xA602;
WDOG_REFRESH = 0xB480;
}