✨ Chitu3D V9 board (#22401)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
VTXtruder
committed by
Scott Lahteine
Scott Lahteine
parent
29dde9be2b
commit
6b73b6c966
@@ -81,12 +81,7 @@
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PD12 // HOT-END
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
|
||||
#define HEATER_BED_PIN PG11 // HOT-BED
|
||||
#define HEATER_BED2_PIN -1 // BED2
|
||||
#define HEATER_BED3_PIN -1 // BED3
|
||||
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN PG14 // MAIN BOARD FAN
|
||||
@@ -97,8 +92,8 @@
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_BED_PIN PA0 // Analog Input
|
||||
#define TEMP_0_PIN PA1 // Analog Input
|
||||
#define TEMP_BED_PIN PA0 // Analog Input
|
||||
|
||||
//
|
||||
// LCD Pins
|
||||
|
||||
@@ -21,148 +21,8 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
#define BOARD_INFO_NAME "Chitu3D V5"
|
||||
|
||||
/**
|
||||
* 2017 Victor Perez Marlin for stm32f1 test
|
||||
*/
|
||||
#define Z_STOP_PIN PG9
|
||||
|
||||
#define BOARD_INFO_NAME "Chitu3D V5"
|
||||
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
|
||||
#define DISABLE_JTAG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#if ENABLED(FLASH_EEPROM_EMULATION)
|
||||
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
|
||||
#else
|
||||
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PG10
|
||||
#define Y_STOP_PIN PA12
|
||||
#define Z_STOP_PIN PA14
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC13
|
||||
#define X_STEP_PIN PE5
|
||||
#define X_DIR_PIN PE6
|
||||
|
||||
#define Y_ENABLE_PIN PE4
|
||||
#define Y_STEP_PIN PE2
|
||||
#define Y_DIR_PIN PE3
|
||||
|
||||
#define Z_ENABLE_PIN PE1
|
||||
#define Z_STEP_PIN PB9
|
||||
#define Z_DIR_PIN PE0
|
||||
|
||||
#define E0_ENABLE_PIN PB8
|
||||
#define E0_STEP_PIN PB4
|
||||
#define E0_DIR_PIN PB5
|
||||
|
||||
#define E1_ENABLE_PIN PG8
|
||||
#define E1_STEP_PIN PC7
|
||||
#define E1_DIR_PIN PC6
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA1 // TH1
|
||||
#define TEMP_BED_PIN PA0 // TB1
|
||||
|
||||
//
|
||||
// Heaters
|
||||
//
|
||||
#define HEATER_0_PIN PG12 // HEATER1
|
||||
#define HEATER_BED_PIN PG11 // HOT BED
|
||||
|
||||
//
|
||||
// Fans
|
||||
//
|
||||
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
|
||||
#define FAN_PIN PG13 // FAN
|
||||
#define FAN2_PIN PG14
|
||||
|
||||
//
|
||||
// Misc
|
||||
//
|
||||
#define BEEPER_PIN PB0
|
||||
//#define LED_PIN -1
|
||||
//#define POWER_LOSS_PIN -1
|
||||
#define FIL_RUNOUT_PIN PA15
|
||||
|
||||
// SPI Flash
|
||||
#define HAS_SPI_FLASH 1
|
||||
#if HAS_SPI_FLASH
|
||||
#define SPI_FLASH_SIZE 0x200000 // 2MB
|
||||
#endif
|
||||
|
||||
// SPI 2
|
||||
#define W25QXX_CS_PIN PB12
|
||||
#define W25QXX_MOSI_PIN PB15
|
||||
#define W25QXX_MISO_PIN PB14
|
||||
#define W25QXX_SCK_PIN PB13
|
||||
|
||||
//
|
||||
// TFT with FSMC interface
|
||||
//
|
||||
#if HAS_FSMC_TFT
|
||||
#define TOUCH_CS_PIN PB7 // SPI1_NSS
|
||||
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
|
||||
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
|
||||
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
|
||||
|
||||
#define TFT_RESET_PIN PF11
|
||||
#define TFT_BACKLIGHT_PIN PD13
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_CS_PIN PD7
|
||||
#define FSMC_RS_PIN PD11
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define TFT_CS_PIN FSMC_CS_PIN
|
||||
#define TFT_RS_PIN FSMC_RS_PIN
|
||||
#endif
|
||||
|
||||
#if ENABLED(TFT_LVGL_UI)
|
||||
// LVGL
|
||||
#define HAS_SPI_FLASH_FONT 1
|
||||
#define HAS_GCODE_PREVIEW 1
|
||||
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
|
||||
#define HAS_LANG_SELECT_SCREEN 1
|
||||
#define HAS_BAK_VIEW_IN_FLASH 0
|
||||
#define HAS_LOGO_IN_FLASH 0
|
||||
#elif ENABLED(TFT_COLOR_UI)
|
||||
// Color UI
|
||||
#define TFT_BUFFER_SIZE 14400
|
||||
#endif
|
||||
|
||||
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
|
||||
// Needs to use SPI2
|
||||
#define SPI_DEVICE 2
|
||||
#define SD_SCK_PIN PB13
|
||||
#define SD_MISO_PIN PB14
|
||||
#define SD_MOSI_PIN PB15
|
||||
#define SD_SS_PIN PB12
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SDIO_SUPPORT
|
||||
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
|
||||
#define SDIO_CLOCK 4500000
|
||||
#define SDIO_READ_RETRIES 16
|
||||
#include "pins_CHITU3D_common.h"
|
||||
|
||||
@@ -21,160 +21,14 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
/**
|
||||
* 2017 Victor Perez Marlin for stm32f1 test
|
||||
*/
|
||||
|
||||
#define BOARD_INFO_NAME "Chitu3D"
|
||||
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
|
||||
#define DISABLE_JTAG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#endif
|
||||
|
||||
#if ENABLED(FLASH_EEPROM_EMULATION)
|
||||
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
|
||||
#else
|
||||
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PG10
|
||||
#define Y_STOP_PIN PA12
|
||||
#define Z_STOP_PIN PG9
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC13
|
||||
#define X_STEP_PIN PE5
|
||||
#define X_DIR_PIN PE6
|
||||
|
||||
#define Y_ENABLE_PIN PE4
|
||||
#define Y_STEP_PIN PE2
|
||||
#define Y_DIR_PIN PE3
|
||||
|
||||
#define Z_ENABLE_PIN PE1
|
||||
#define Z_STEP_PIN PB9
|
||||
#define Z_DIR_PIN PE0
|
||||
#define BOARD_INFO_NAME "Chitu3D V6"
|
||||
|
||||
#define Z2_ENABLE_PIN PF3
|
||||
#define Z2_STEP_PIN PF5
|
||||
#define Z2_DIR_PIN PF1
|
||||
|
||||
#define E0_ENABLE_PIN PB8
|
||||
#define E0_STEP_PIN PB4
|
||||
#define E0_DIR_PIN PB5
|
||||
|
||||
#define E1_ENABLE_PIN PG8
|
||||
#define E1_STEP_PIN PC7
|
||||
#define E1_DIR_PIN PC6
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA1 // TH1
|
||||
#define TEMP_BED_PIN PA0 // TB1
|
||||
|
||||
//
|
||||
// Heaters
|
||||
//
|
||||
#define HEATER_0_PIN PG12 // HEATER1
|
||||
#define HEATER_BED_PIN PG11 // HOT BED
|
||||
//#define HEATER_BED_INVERTING true
|
||||
|
||||
//
|
||||
// Fans
|
||||
//
|
||||
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
|
||||
#define FAN_PIN PG13 // FAN
|
||||
#define FAN2_PIN PG14
|
||||
|
||||
//
|
||||
// Misc
|
||||
//
|
||||
#define BEEPER_PIN PB0
|
||||
//#define LED_PIN PD3
|
||||
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
|
||||
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PA15 // MT_DET
|
||||
#endif
|
||||
#ifndef FIL_RUNOUT2_PIN
|
||||
#define FIL_RUNOUT2_PIN PF13
|
||||
#endif
|
||||
|
||||
// SPI Flash
|
||||
#define HAS_SPI_FLASH 1
|
||||
#if HAS_SPI_FLASH
|
||||
#define SPI_FLASH_SIZE 0x200000 // 2MB
|
||||
#endif
|
||||
|
||||
// SPI 2
|
||||
#define W25QXX_CS_PIN PB12
|
||||
#define W25QXX_MOSI_PIN PB15
|
||||
#define W25QXX_MISO_PIN PB14
|
||||
#define W25QXX_SCK_PIN PB13
|
||||
|
||||
//
|
||||
// TFT with FSMC interface
|
||||
//
|
||||
#if HAS_FSMC_TFT
|
||||
#define TOUCH_CS_PIN PB7 // SPI1_NSS
|
||||
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
|
||||
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
|
||||
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
|
||||
|
||||
#define TFT_RESET_PIN PF11
|
||||
#define TFT_BACKLIGHT_PIN PD13
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_CS_PIN PD7
|
||||
#define FSMC_RS_PIN PD11
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
#endif
|
||||
|
||||
#if ENABLED(TFT_LVGL_UI)
|
||||
// LVGL
|
||||
#define HAS_SPI_FLASH_FONT 1
|
||||
#define HAS_GCODE_PREVIEW 1
|
||||
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
|
||||
#define HAS_LANG_SELECT_SCREEN 1
|
||||
#define HAS_BAK_VIEW_IN_FLASH 0
|
||||
#define HAS_LOGO_IN_FLASH 0
|
||||
#elif ENABLED(TFT_COLOR_UI)
|
||||
// Color UI
|
||||
#define TFT_BUFFER_SIZE 14400
|
||||
#endif
|
||||
|
||||
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
|
||||
// so SPI2 is required.
|
||||
#define SPI_DEVICE 2
|
||||
#define SD_SCK_PIN PB13
|
||||
#define SD_MISO_PIN PB14
|
||||
#define SD_MOSI_PIN PB15
|
||||
#define SD_SS_PIN PB12
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SDIO_SUPPORT
|
||||
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
|
||||
#define SDIO_CLOCK 4500000
|
||||
#define SDIO_READ_RETRIES 16
|
||||
#include "pins_CHITU3D_common.h"
|
||||
|
||||
36
Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h
Executable file
36
Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h
Executable file
@@ -0,0 +1,36 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define BOARD_INFO_NAME "Chitu3D V9"
|
||||
|
||||
#define Z_STOP_PIN PA14
|
||||
|
||||
#define Z2_ENABLE_PIN PF3
|
||||
#define Z2_STEP_PIN PF5
|
||||
#define Z2_DIR_PIN PF1
|
||||
|
||||
#ifndef FIL_RUNOUT2_PIN
|
||||
#define FIL_RUNOUT2_PIN PF13
|
||||
#endif
|
||||
|
||||
#include "pins_CHITU3D_common.h"
|
||||
177
Marlin/src/pins/stm32f1/pins_CHITU3D_common.h
Normal file
177
Marlin/src/pins/stm32f1/pins_CHITU3D_common.h
Normal file
@@ -0,0 +1,177 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "Chitu3D"
|
||||
#endif
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
|
||||
#endif
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
#define DISABLE_JTAG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#endif
|
||||
|
||||
#if ENABLED(FLASH_EEPROM_EMULATION)
|
||||
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
|
||||
#else
|
||||
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PG10
|
||||
#define Y_STOP_PIN PA12
|
||||
#ifndef Z_STOP_PIN
|
||||
#define Z_STOP_PIN PG9
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC13
|
||||
#define X_STEP_PIN PE5
|
||||
#define X_DIR_PIN PE6
|
||||
|
||||
#define Y_ENABLE_PIN PE4
|
||||
#define Y_STEP_PIN PE2
|
||||
#define Y_DIR_PIN PE3
|
||||
|
||||
#define Z_ENABLE_PIN PE1
|
||||
#define Z_STEP_PIN PB9
|
||||
#define Z_DIR_PIN PE0
|
||||
|
||||
#define E0_ENABLE_PIN PB8
|
||||
#define E0_STEP_PIN PB4
|
||||
#define E0_DIR_PIN PB5
|
||||
|
||||
#define E1_ENABLE_PIN PG8
|
||||
#define E1_STEP_PIN PC7
|
||||
#define E1_DIR_PIN PC6
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA1 // TH1 Analog Input
|
||||
#define TEMP_BED_PIN PA0 // TB1 Analog Input
|
||||
|
||||
//
|
||||
// Heaters
|
||||
//
|
||||
#define HEATER_0_PIN PG12 // HEATER1
|
||||
#define HEATER_BED_PIN PG11 // HOT BED
|
||||
//#define HEATER_BED_INVERTING true
|
||||
|
||||
//
|
||||
// Fans
|
||||
//
|
||||
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
|
||||
#define FAN_PIN PG13 // FAN
|
||||
#define FAN2_PIN PG14
|
||||
|
||||
//
|
||||
// Misc
|
||||
//
|
||||
#define BEEPER_PIN PB0
|
||||
//#define LED_PIN PD3
|
||||
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
|
||||
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PA15 // MT_DET
|
||||
#endif
|
||||
|
||||
// SPI Flash
|
||||
#define HAS_SPI_FLASH 1
|
||||
#if HAS_SPI_FLASH
|
||||
#define SPI_FLASH_SIZE 0x200000 // 2MB
|
||||
#endif
|
||||
|
||||
// SPI 2
|
||||
#define W25QXX_CS_PIN PB12
|
||||
#define W25QXX_MOSI_PIN PB15
|
||||
#define W25QXX_MISO_PIN PB14
|
||||
#define W25QXX_SCK_PIN PB13
|
||||
|
||||
//
|
||||
// TFT with FSMC interface
|
||||
//
|
||||
#if HAS_FSMC_TFT
|
||||
#define TOUCH_CS_PIN PB7 // SPI1_NSS
|
||||
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
|
||||
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
|
||||
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
|
||||
|
||||
#define TFT_RESET_PIN PF11
|
||||
#define TFT_BACKLIGHT_PIN PD13
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_CS_PIN PD7
|
||||
#define FSMC_RS_PIN PD11
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define TFT_CS_PIN FSMC_CS_PIN
|
||||
#define TFT_RS_PIN FSMC_RS_PIN
|
||||
#endif
|
||||
|
||||
#if ENABLED(TFT_LVGL_UI)
|
||||
// LVGL
|
||||
#define HAS_SPI_FLASH_FONT 1
|
||||
#define HAS_GCODE_PREVIEW 1
|
||||
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
|
||||
#define HAS_LANG_SELECT_SCREEN 1
|
||||
#define HAS_BAK_VIEW_IN_FLASH 0
|
||||
#define HAS_LOGO_IN_FLASH 0
|
||||
#elif ENABLED(TFT_COLOR_UI)
|
||||
// Color UI
|
||||
#define TFT_BUFFER_SIZE 14400
|
||||
#endif
|
||||
|
||||
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
|
||||
// so SPI2 is required.
|
||||
#define SPI_DEVICE 2
|
||||
#define SD_SCK_PIN PB13
|
||||
#define SD_MISO_PIN PB14
|
||||
#define SD_MOSI_PIN PB15
|
||||
#define SD_SS_PIN PB12
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SDIO_SUPPORT
|
||||
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
|
||||
#define SDIO_CLOCK 4500000
|
||||
#define SDIO_READ_RETRIES 16
|
||||
Reference in New Issue
Block a user