bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🔥 Drop STM L64** drivers, STEVAL_3DP001V1 (#24427)

Browse Source
This commit is contained in:
Bob Kuhn
2022-07-13 22:16:22 -05:00
committed by Scott Lahteine
parent 9283859b1e
commit 6b19a58f03
37 changed files with 55 additions and 5880 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
Marlin/src/inc/Conditionals_post.h
View File

@ -1610,7 +1610,7 @@
#define HAS_X_MS_PINS 1
#endif
#if PIN_EXISTS(X2_ENABLE) || AXIS_IS_L64XX(X2) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(X2))
#if PIN_EXISTS(X2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(X2))
#define HAS_X2_ENABLE 1
#endif
#if PIN_EXISTS(X2_DIR)
@ -1631,7 +1631,7 @@
#endif
#if HAS_Y_AXIS
#if PIN_EXISTS(Y_ENABLE) || AXIS_IS_L64XX(Y) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y))
#if PIN_EXISTS(Y_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y))
#define HAS_Y_ENABLE 1
#endif
#if PIN_EXISTS(Y_DIR)
@ -1644,7 +1644,7 @@
#define HAS_Y_MS_PINS 1
#endif
#if PIN_EXISTS(Y2_ENABLE) || AXIS_IS_L64XX(Y2) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y2))
#if PIN_EXISTS(Y2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y2))
#define HAS_Y2_ENABLE 1
#endif
#if PIN_EXISTS(Y2_DIR)
@ -1664,7 +1664,7 @@
#endif
#if HAS_Z_AXIS
#if PIN_EXISTS(Z_ENABLE) || AXIS_IS_L64XX(Z) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z))
#if PIN_EXISTS(Z_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z))
#define HAS_Z_ENABLE 1
#endif
#if PIN_EXISTS(Z_DIR)
@ -1684,7 +1684,7 @@
#endif
#if NUM_Z_STEPPERS >= 2
#if PIN_EXISTS(Z2_ENABLE) || AXIS_IS_L64XX(Z2) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2))
#if PIN_EXISTS(Z2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2))
#define HAS_Z2_ENABLE 1
#endif
#if PIN_EXISTS(Z2_DIR)
@ -1699,7 +1699,7 @@
#endif
#if NUM_Z_STEPPERS >= 3
#if PIN_EXISTS(Z3_ENABLE) || AXIS_IS_L64XX(Z3) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z3))
#if PIN_EXISTS(Z3_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z3))
#define HAS_Z3_ENABLE 1
#endif
#if PIN_EXISTS(Z3_DIR)
@ -1714,7 +1714,7 @@
#endif
#if NUM_Z_STEPPERS >= 4
#if PIN_EXISTS(Z4_ENABLE) || AXIS_IS_L64XX(Z4) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z4))
#if PIN_EXISTS(Z4_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z4))
#define HAS_Z4_ENABLE 1
#endif
#if PIN_EXISTS(Z4_DIR)
@ -1729,7 +1729,7 @@
#endif
#if HAS_I_AXIS
#if PIN_EXISTS(I_ENABLE) || AXIS_IS_L64XX(I) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(I))
#if PIN_EXISTS(I_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(I))
#define HAS_I_ENABLE 1
#endif
#if PIN_EXISTS(I_DIR)
@ -1749,7 +1749,7 @@
#endif
#if HAS_J_AXIS
#if PIN_EXISTS(J_ENABLE) || AXIS_IS_L64XX(J) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(J))
#if PIN_EXISTS(J_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(J))
#define HAS_J_ENABLE 1
#endif
#if PIN_EXISTS(J_DIR)
@ -1769,7 +1769,7 @@
#endif
#if HAS_K_AXIS
#if PIN_EXISTS(K_ENABLE) || AXIS_IS_L64XX(K) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(K))
#if PIN_EXISTS(K_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(K))
#define HAS_K_ENABLE 1
#endif
#if PIN_EXISTS(K_DIR)
@ -1789,7 +1789,7 @@
#endif
#if HAS_U_AXIS
#if PIN_EXISTS(U_ENABLE) || AXIS_IS_L64XX(U) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(U))
#if PIN_EXISTS(U_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(U))
#define HAS_U_ENABLE 1
#endif
#if PIN_EXISTS(U_DIR)
@ -1809,7 +1809,7 @@
#endif
#if HAS_V_AXIS
#if PIN_EXISTS(V_ENABLE) || AXIS_IS_L64XX(V) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(V))
#if PIN_EXISTS(V_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(V))
#define HAS_V_ENABLE 1
#endif
#if PIN_EXISTS(V_DIR)
@ -1829,7 +1829,7 @@
#endif
#if HAS_W_AXIS
#if PIN_EXISTS(W_ENABLE) || AXIS_IS_L64XX(W) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(W))
#if PIN_EXISTS(W_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(W))
#define HAS_W_ENABLE 1
#endif
#if PIN_EXISTS(W_DIR)
@ -1851,7 +1851,7 @@
// Extruder steppers and solenoids
#if HAS_EXTRUDERS
#if PIN_EXISTS(E0_ENABLE) || AXIS_IS_L64XX(E0) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0))
#if PIN_EXISTS(E0_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0))
#define HAS_E0_ENABLE 1
#endif
#if PIN_EXISTS(E0_DIR)
@ -1865,7 +1865,7 @@
#endif
#if E_STEPPERS > 1 || ENABLED(E_DUAL_STEPPER_DRIVERS)
#if PIN_EXISTS(E1_ENABLE) || AXIS_IS_L64XX(E1) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1))
#if PIN_EXISTS(E1_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1))
#define HAS_E1_ENABLE 1
#endif
#if PIN_EXISTS(E1_DIR)
@ -1880,7 +1880,7 @@
#endif
#if E_STEPPERS > 2
#if PIN_EXISTS(E2_ENABLE) || AXIS_IS_L64XX(E2) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2))
#if PIN_EXISTS(E2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2))
#define HAS_E2_ENABLE 1
#endif
#if PIN_EXISTS(E2_DIR)
@ -1895,7 +1895,7 @@
#endif
#if E_STEPPERS > 3
#if PIN_EXISTS(E3_ENABLE) || AXIS_IS_L64XX(E3) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3))
#if PIN_EXISTS(E3_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3))
#define HAS_E3_ENABLE 1
#endif
#if PIN_EXISTS(E3_DIR)
@ -1910,7 +1910,7 @@
#endif
#if E_STEPPERS > 4
#if PIN_EXISTS(E4_ENABLE) || AXIS_IS_L64XX(E4) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4))
#if PIN_EXISTS(E4_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4))
#define HAS_E4_ENABLE 1
#endif
#if PIN_EXISTS(E4_DIR)
@ -1925,7 +1925,7 @@
#endif
#if E_STEPPERS > 5
#if PIN_EXISTS(E5_ENABLE) || AXIS_IS_L64XX(E5) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5))
#if PIN_EXISTS(E5_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5))
#define HAS_E5_ENABLE 1
#endif
#if PIN_EXISTS(E5_DIR)
@ -1940,7 +1940,7 @@
#endif
#if E_STEPPERS > 6
#if PIN_EXISTS(E6_ENABLE) || AXIS_IS_L64XX(E6) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6))
#if PIN_EXISTS(E6_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6))
#define HAS_E6_ENABLE 1
#endif
#if PIN_EXISTS(E6_DIR)
@ -1955,7 +1955,7 @@
#endif
#if E_STEPPERS > 7
#if PIN_EXISTS(E7_ENABLE) || AXIS_IS_L64XX(E7) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7))
#if PIN_EXISTS(E7_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7))
#define HAS_E7_ENABLE 1
#endif
#if PIN_EXISTS(E7_DIR)

34
Marlin/src/inc/SanityCheck.h
View File

@ -350,7 +350,7 @@
#elif defined(HAVE_TMC2208)
#error "HAVE_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208."
#elif defined(HAVE_L6470DRIVER)
#error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470."
#error "HAVE_L6470DRIVER is obsolete. L64xx stepper drivers are no longer supported in Marlin."
#elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC) || defined(E6_IS_TMC) || defined(E7_IS_TMC)
#error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X."
@ -363,9 +363,6 @@
#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208) || defined(E6_IS_TMC2208) || defined(E7_IS_TMC2208)
#error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208."
#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470) || defined(E6_IS_L6470) || defined(E7_IS_L6470)
#error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470."
#elif defined(AUTOMATIC_CURRENT_CONTROL)
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS."
#elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
@ -647,6 +644,26 @@
#error "LEVEL_CENTER_TOO is now BED_TRAMMING_INCLUDE_CENTER."
#endif
// L64xx stepper drivers have been removed
#define _L6470 0x6470
#define _L6474 0x6474
#define _L6480 0x6480
#define _POWERSTEP01 0xF00D
#if HAS_DRIVER(L6470)
#error "L6470 stepper drivers are no longer supported in Marlin."
#elif HAS_DRIVER(L6474)
#error "L6474 stepper drivers are no longer supported in Marlin."
#elif HAS_DRIVER(L6480)
#error "L6480 stepper drivers are no longer supported in Marlin."
#elif HAS_DRIVER(POWERSTEP01)
#error "POWERSTEP01 stepper drivers are no longer supported in Marlin."
#endif
#undef _L6470
#undef _L6474
#undef _L6480
#undef _POWERSTEP01
// Check AXIS_RELATIVE_MODES
constexpr float arm[] = AXIS_RELATIVE_MODES;
static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
@ -3533,7 +3550,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* TMC SPI Chaining
*/
#define IN_CHAIN(A) ((A##_CHAIN_POS > 0) && !HAS_L64XX)
#define IN_CHAIN(A) A##_CHAIN_POS > 0
#if IN_CHAIN(X ) || IN_CHAIN(Y ) || IN_CHAIN(Z ) || IN_CHAIN(X2) || IN_CHAIN(Y2) || IN_CHAIN(Z2) || IN_CHAIN(Z3) || IN_CHAIN(Z4) \
|| IN_CHAIN(E0) || IN_CHAIN(E1) || IN_CHAIN(E2) || IN_CHAIN(E3) || IN_CHAIN(E4) || IN_CHAIN(E5) || IN_CHAIN(E6) || IN_CHAIN(E7)
#define BAD_CHAIN(A) (IN_CHAIN(A) && !PIN_EXISTS(A##_CS))
@ -3598,13 +3615,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#undef IN_CHAIN
/**
* L64XX requirement
*/
#if HAS_L64XX && NUM_AXES > 3
#error "L64XX requires NUM_AXES <= 3. Homing with L64XX is not yet implemented for NUM_AXES > 3."
#endif
/**
* Digipot requirement
*/