bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🔥 Drop STM L64** drivers, STEVAL_3DP001V1 (#24427)

Browse Source
This commit is contained in:
Bob Kuhn
2022-07-13 22:16:22 -05:00
committed by Scott Lahteine
parent 9283859b1e
commit 6b19a58f03
37 changed files with 55 additions and 5880 deletions
Download Patch File Download Diff File Expand all files Collapse all files

139
Marlin/src/HAL/shared/HAL_spi_L6470.cpp
View File

@ -1,139 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Software L6470 SPI functions originally from Arduino Sd2Card Library
* Copyright (c) 2009 by William Greiman
*/
#include "../../inc/MarlinConfig.h"
#if HAS_L64XX
#include "Delay.h"
#include "../../core/serial.h"
#include "../../libs/L64XX/L64XX_Marlin.h"
// Make sure GCC optimizes this file.
// Note that this line triggers a bug in GCC which is fixed by casting.
// See the note below.
#pragma GCC optimize (3)
// run at ~4Mhz
inline uint8_t L6470_SpiTransfer_Mode_0(uint8_t b) { // using Mode 0
for (uint8_t bits = 8; bits--;) {
WRITE(L6470_CHAIN_MOSI_PIN, b & 0x80);
b <<= 1; // little setup time
WRITE(L6470_CHAIN_SCK_PIN, HIGH);
DELAY_NS(125); // 10 cycles @ 84mhz
b |= (READ(L6470_CHAIN_MISO_PIN) != 0);
WRITE(L6470_CHAIN_SCK_PIN, LOW);
DELAY_NS(125); // 10 cycles @ 84mhz
}
return b;
}
inline uint8_t L6470_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3
for (uint8_t bits = 8; bits--;) {
WRITE(L6470_CHAIN_SCK_PIN, LOW);
WRITE(L6470_CHAIN_MOSI_PIN, b & 0x80);
DELAY_NS(125); // 10 cycles @ 84mhz
WRITE(L6470_CHAIN_SCK_PIN, HIGH);
DELAY_NS(125); // Need more delay for fast CPUs
b <<= 1; // little setup time
b |= (READ(L6470_CHAIN_MISO_PIN) != 0);
}
DELAY_NS(125); // 10 cycles @ 84mhz
return b;
}
/**
* L64XX methods for SPI init and transfer
*/
void L64XX_Marlin::spi_init() {
OUT_WRITE(L6470_CHAIN_SS_PIN, HIGH);
OUT_WRITE(L6470_CHAIN_SCK_PIN, HIGH);
OUT_WRITE(L6470_CHAIN_MOSI_PIN, HIGH);
SET_INPUT(L6470_CHAIN_MISO_PIN);
#if PIN_EXISTS(L6470_BUSY)
SET_INPUT(L6470_BUSY_PIN);
#endif
OUT_WRITE(L6470_CHAIN_MOSI_PIN, HIGH);
}
uint8_t L64XX_Marlin::transfer_single(uint8_t data, int16_t ss_pin) {
// First device in chain has data sent last
extDigitalWrite(ss_pin, LOW);
hal.isr_off(); // Disable interrupts during SPI transfer (can't allow partial command to chips)
const uint8_t data_out = L6470_SpiTransfer_Mode_3(data);
hal.isr_on(); // Enable interrupts
extDigitalWrite(ss_pin, HIGH);
return data_out;
}
uint8_t L64XX_Marlin::transfer_chain(uint8_t data, int16_t ss_pin, uint8_t chain_position) {
uint8_t data_out = 0;
// first device in chain has data sent last
extDigitalWrite(ss_pin, LOW);
for (uint8_t i = L64XX::chain[0]; !L64xxManager.spi_abort && i >= 1; i--) { // Send data unless aborted
hal.isr_off(); // Disable interrupts during SPI transfer (can't allow partial command to chips)
const uint8_t temp = L6470_SpiTransfer_Mode_3(uint8_t(i == chain_position ? data : dSPIN_NOP));
hal.isr_on(); // Enable interrupts
if (i == chain_position) data_out = temp;
}
extDigitalWrite(ss_pin, HIGH);
return data_out;
}
/**
* Platform-supplied L6470 buffer transfer method
*/
void L64XX_Marlin::transfer(uint8_t L6470_buf[], const uint8_t length) {
// First device in chain has its data sent last
if (spi_active) { // Interrupted SPI transfer so need to
WRITE(L6470_CHAIN_SS_PIN, HIGH); // guarantee min high of 650ns
DELAY_US(1);
}
WRITE(L6470_CHAIN_SS_PIN, LOW);
for (uint8_t i = length; i >= 1; i--)
L6470_SpiTransfer_Mode_3(uint8_t(L6470_buf[i]));
WRITE(L6470_CHAIN_SS_PIN, HIGH);
}
#pragma GCC reset_options
#endif // HAS_L64XX