Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3

This commit is contained in:
Scott Lahteine 2016-03-01 01:24:57 +00:00 committed by Scott Lahteine
parent b18816fcbf
commit 6a21180bd4
4 changed files with 37 additions and 58 deletions

View File

@ -16,7 +16,6 @@
#define E0_MS2_PIN -1
#define E1_MS1_PIN -1
#define E1_MS2_PIN -1
#define DIGIPOTSS_PIN -1
#define HEATER_3_PIN -1
#define TEMP_3_PIN -1
@ -269,7 +268,7 @@
analogInputToDigitalPin(TEMP_BED_PIN) \
}
#define HAS_DIGIPOTSS (DIGIPOTSS_PIN >= 0)
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
#endif //__PINS_H

View File

@ -6,76 +6,57 @@
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#include "pins_RAMPS_13.h"
#define LED_PIN 13
#undef X_MAX_PIN
#define X_MAX_PIN 79 // 2
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_MIN_PIN 3
#define X_MAX_PIN 79
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 77 // 62
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#undef FAN_PIN
#define FAN_PIN 12 // 4
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 77
#define Z_MIN_PIN 18 // Z-MIN Label
#define Z_MAX_PIN 19 // IND_S_5V
#undef HEATER_0_PIN
#define HEATER_0_PIN 9 // 10
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#undef HEATER_1_PIN
#define HEATER_1_PIN 10 // 9
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#undef TEMP_1_PIN
#define TEMP_1_PIN 14 // 15
#define FAN_PIN 12
#define HEATER_0_PIN 9
#define TEMP_0_PIN 13
#undef TEMP_BED_PIN
#define TEMP_BED_PIN 15 // 14
#define DIGIPOTSS_PIN 22
#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 }
#define FAN1_PIN 7
#define HEATER_1_PIN 10
#define TEMP_1_PIN 14
#define HEATER_BED_PIN 8
#define TEMP_BED_PIN 15
#undef DIGIPOTSS_PIN
#define DIGIPOTSS_PIN 22
#define DIGIPOT_CHANNELS { 4, 5, 3 , 0, 1 }
#undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#if ENABLED(BQ_LCD_SMART_CONTROLLER) // Most similar to REPRAP_DISCOUNT_SMART_CONTROLLER
#define KILL_PIN 41
#define BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define LCD_PIN_BL 39
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define BEEPER_PIN 37
#define SDPOWER -1
#define SDSS 53
#define SD_DETECT_PIN 49
#endif
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
#undef Z_MIN_PIN
#undef Z_MAX_PIN
#define Z_MIN_PIN 19 // IND_S_5V
#define Z_MAX_PIN 18 // Z-MIN Label
#endif

View File

@ -82,7 +82,6 @@
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#undef DIGIPOTSS_PIN
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping