diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 15bfd5ef47..2fe035f6cb 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 36c1239da8..f8c84739d9 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 55e068957a..db8d390c66 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 2 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index d5b6ed0b24..e2bb15834a 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -123,6 +123,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 7b9849bacb..daf41cfbf4 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index e99d4dd01a..9037af19f5 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -127,6 +127,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 2d3067c6d7..b145d9a5a7 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index d1522c3fa7..2768283416 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 13c484ac1f..522760893d 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -145,6 +145,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 0da46efdd8..cebbcc137c 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index ae59c5d15c..8553ac7003 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -123,6 +123,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 638ce4032e..b1f19d42a6 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index 4560cd8b93..55f99dc410 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 2 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index e2e9227b37..b92ee7daec 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 4729e39be3..080268d6b6 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index a37bced783..3f98ab105a 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -126,6 +126,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index c23b546ab2..8af8a844ef 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -113,6 +113,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index db34f1ab00..bc5c1317fe 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 9e85c919d8..eb3759e378 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend.