bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

BLTouch V3.0 support (#13406)

Browse Source
This commit is contained in:
InsanityAutomation 2019-03-17 06:57:25 -04:00 committed by Scott Lahteine
parent 49cf92dc36
commit 691e5c3bb8
108 changed files with 860 additions and 77 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

6
Marlin/src/Marlin.cpp
View File

@ -84,6 +84,10 @@
#include "feature/leds/leds.h"
#endif
#if ENABLED(BLTOUCH)
#include "feature/bltouch.h"
#endif
#if HAS_SERVOS
#include "module/servo.h"
#endif
@ -1049,7 +1053,7 @@ void setup() {
#endif
#if ENABLED(BLTOUCH)
bltouch_init();
bltouch.init();
#endif
#if ENABLED(I2C_POSITION_ENCODERS)

93
Marlin/src/feature/bltouch.cpp Normal file
View File

@ -0,0 +1,93 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../inc/MarlinConfig.h"
#if ENABLED(BLTOUCH)
#include "bltouch.h"
BLTouch bltouch;
#include "../module/servo.h"
void stop();
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
#include "../core/debug_out.h"
void BLTouch::command(const BLTCommand cmd) {
MOVE_SERVO(Z_PROBE_SERVO_NR, cmd);
safe_delay(BLTOUCH_DELAY);
}
void BLTouch::init() {
reset(); // Clear all BLTouch error conditions
stow();
}
bool BLTouch::triggered() {
return (
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING
#else
READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING
#endif
);
}
bool BLTouch::set_deployed(const bool in_deploy) {
if (in_deploy && triggered()) { // If BLTouch says it's triggered
reset(); // try to reset it.
_deploy(); _stow(); // Deploy and stow to clear the "triggered" condition.
safe_delay(1500); // Wait for internal self-test to complete.
// (Measured completion time was 0.65 seconds
// after reset, deploy, and stow sequence)
if (triggered()) { // If it still claims to be triggered...
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH);
stop(); // punt!
return true;
}
}
#if ENABLED(BLTOUCH_V3)
#if ENABLED(BLTOUCH_FORCE_5V_MODE)
set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled
#else
set_OD_mode();
#endif
#endif
if (in_deploy) {
_deploy();
#if ENABLED(BLTOUCH_V3)
set_SW_mode(); // Ensure Switch mode is activated for BLTouch V3. Ignored on V2.
#endif
}
else _stow();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("bltouch.set_deployed(", in_deploy, ")");
return false;
}
#endif // BLTOUCH

59
Marlin/src/feature/bltouch.h Normal file
View File

@ -0,0 +1,59 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../inc/MarlinConfigPre.h"
// BLTouch commands are sent as servo angles
typedef unsigned char BLTCommand;
#define BLTOUCH_DEPLOY 10
#define BLTOUCH_SW_MODE 60
#define BLTOUCH_STOW 90
#define BLTOUCH_SELFTEST 120
#define BLTOUCH_5V_MODE 140
#define BLTOUCH_OD_MODE 150
#define BLTOUCH_RESET 160
class BLTouch {
public:
static void init();
static void command(const BLTCommand cmd);
static bool triggered();
FORCE_INLINE static void reset() { command(BLTOUCH_RESET); }
FORCE_INLINE static void set_5V_mode() { command(BLTOUCH_5V_MODE); }
FORCE_INLINE static void set_OD_mode() { command(BLTOUCH_OD_MODE); }
FORCE_INLINE static void set_SW_mode() { command(BLTOUCH_SW_MODE); }
FORCE_INLINE static bool deploy() { return set_deployed(true); }
FORCE_INLINE static bool stow() { return set_deployed(false); }
private:
FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY); }
FORCE_INLINE static void _stow() { command(BLTOUCH_STOW); }
static bool set_deployed(const bool deploy);
};
#define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
extern BLTouch bltouch;

6
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -43,6 +43,10 @@
#include "../../module/probe.h"
#endif
#if ENABLED(BLTOUCH)
#include "../../feature/bltouch.h"
#endif
#include "../../lcd/ultralcd.h"
#if HAS_DRIVER(L6470) // set L6470 absolute position registers to counts
@ -235,7 +239,7 @@ void GcodeSuite::G28(const bool always_home_all) {
#endif
#if ENABLED(BLTOUCH)
bltouch_init();
bltouch.init();
#endif
// Always home with tool 0 active

4
Marlin/src/gcode/calibrate/G34_M422.cpp
View File

@ -108,8 +108,8 @@ void GcodeSuite::G34() {
#endif
#if ENABLED(BLTOUCH)
bltouch_command(BLTOUCH_RESET);
set_bltouch_deployed(false);
bltouch.reset();
bltouch.stow();
#endif
// Always home with tool 0 active

14
Marlin/src/inc/Conditionals_LCD.h
View File

@ -460,25 +460,13 @@
#ifndef BLTOUCH_DELAY
#define BLTOUCH_DELAY 375
#endif
#undef Z_SERVO_ANGLES
#define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
#define BLTOUCH_DEPLOY 10
#define BLTOUCH_STOW 90
#define BLTOUCH_SELFTEST 120
#define BLTOUCH_RESET 160
#define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)
// Always disable probe pin inverting for BLTouch
#undef Z_MIN_PROBE_ENDSTOP_INVERTING
#define Z_MIN_PROBE_ENDSTOP_INVERTING false
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#undef Z_MIN_ENDSTOP_INVERTING
#define Z_MIN_ENDSTOP_INVERTING Z_MIN_PROBE_ENDSTOP_INVERTING
#define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN)
#else
#define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE)
#define Z_MIN_ENDSTOP_INVERTING false
#endif
#endif

9
Marlin/src/lcd/language/language_en.h
View File

@ -867,6 +867,15 @@
#ifndef MSG_BLTOUCH_DEPLOY
#define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch")
#endif
#ifndef MSG_BLTOUCH_SW_MODE
#define MSG_BLTOUCH_SW_MODE _UxGT("SW Deploy BLTouch")
#endif
#ifndef MSG_BLTOUCH_5V_MODE
#define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V Mode")
#endif
#ifndef MSG_BLTOUCH_OD_MODE
#define MSG_BLTOUCH_OD_MODE _UxGT("BLTouch OD Mode")
#endif
#ifndef MSG_BLTOUCH_STOW
#define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch")
#endif

4
Marlin/src/lcd/menu/menu.h
View File

@ -296,11 +296,11 @@ class MenuItem_bool {
++_thisItemNr; \
} while(0)
#define MENU_ITEM_ADDON_START(X) \
#define MENU_ITEM_ADDON_START(X) do{ \
if (ui.should_draw() && _menuLineNr == _thisItemNr - 1) { \
SETCURSOR(X, _lcdLineNr)
#define MENU_ITEM_ADDON_END() } (0)
#define MENU_ITEM_ADDON_END() } }while(0)
#define STATIC_ITEM(LABEL, ...) STATIC_ITEM_P(PSTR(LABEL), ## __VA_ARGS__)

10
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -37,9 +37,11 @@
#if HAS_BED_PROBE
#include "../../module/probe.h"
#if ENABLED(BLTOUCH)
#include "../../module/endstops.h"
#endif
#endif
#if ENABLED(BLTOUCH)
#include "../../module/endstops.h"
#include "../../feature/bltouch.h"
#endif
#if ENABLED(PIDTEMP)
@ -694,7 +696,7 @@ void menu_advanced_settings() {
//
#if ENABLED(BLTOUCH)
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
if (!endstops.z_probe_enabled && TEST_BLTOUCH())
if (!endstops.z_probe_enabled && bltouch.triggered())
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
#endif

5
Marlin/src/lcd/menu/menu_configuration.cpp
View File

@ -161,6 +161,11 @@ static void lcd_factory_settings() {
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY)));
MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW)));
#if ENABLED(BLTOUCH_V3)
MENU_ITEM(gcode, MSG_BLTOUCH_SW_MODE, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SW_MODE)));
MENU_ITEM(gcode, MSG_BLTOUCH_5V_MODE, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_5V_MODE)));
MENU_ITEM(gcode, MSG_BLTOUCH_OD_MODE, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_OD_MODE)));
#endif
END_MENU();
}

2
Marlin/src/module/configuration_store.cpp
View File

@ -2578,7 +2578,7 @@ void MarlinSettings::reset() {
#endif
#elif ENABLED(SWITCHING_NOZZLE)
case SWITCHING_NOZZLE_SERVO_NR:
#elif defined(Z_SERVO_ANGLES) && defined(Z_PROBE_SERVO_NR)
#elif (ENABLED(BLTOUCH) && defined(BLTOUCH_ANGLES)) || (defined(Z_SERVO_ANGLES) && defined(Z_PROBE_SERVO_NR))
case Z_PROBE_SERVO_NR:
#endif
CONFIG_ECHO_START();

12
Marlin/src/module/motion.cpp
View File

@ -47,6 +47,10 @@
#include "../feature/bedlevel/bedlevel.h"
#endif
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
#endif
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
#include "../lcd/ultralcd.h"
#endif
@ -1400,7 +1404,7 @@ void homeaxis(const AxisEnum axis) {
#if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
// BLTOUCH needs to be deployed every time
if (axis == Z_AXIS && set_bltouch_deployed(true)) return;
if (axis == Z_AXIS && bltouch.deploy()) return;
#endif
do_homing_move(axis, 1.5f * max_length(
@ -1414,7 +1418,7 @@ void homeaxis(const AxisEnum axis) {
#if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
// BLTOUCH needs to be stowed after trigger to rearm itself
if (axis == Z_AXIS) set_bltouch_deployed(false);
if (axis == Z_AXIS) bltouch.stow();
#endif
// When homing Z with probe respect probe clearance
@ -1440,14 +1444,14 @@ void homeaxis(const AxisEnum axis) {
#if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
// BLTOUCH needs to be deployed every time
if (axis == Z_AXIS && set_bltouch_deployed(true)) return;
if (axis == Z_AXIS && bltouch.deploy()) return;
#endif
do_homing_move(axis, 2 * bump, get_homing_bump_feedrate(axis));
#if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
// BLTOUCH needs to be stowed after trigger to rearm itself
if (axis == Z_AXIS) set_bltouch_deployed(false);
if (axis == Z_AXIS) bltouch.stow();
#endif
}

39
Marlin/src/module/probe.cpp
View File

@ -56,6 +56,10 @@
float zprobe_zoffset; // Initialized by settings.load()
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
#endif
#if HAS_Z_SERVO_PROBE
#include "servo.h"
#endif
@ -289,37 +293,6 @@ float zprobe_zoffset; // Initialized by settings.load()
}
#endif // QUIET_PROBING
#if ENABLED(BLTOUCH)
void bltouch_command(const int angle) {
MOVE_SERVO(Z_PROBE_SERVO_NR, angle); // Give the BL-Touch the command and wait
safe_delay(BLTOUCH_DELAY);
}
bool set_bltouch_deployed(const bool deploy) {
if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered
bltouch_command(BLTOUCH_RESET); // try to reset it.
bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to
bltouch_command(BLTOUCH_STOW); // clear the triggered condition.
safe_delay(1500); // Wait for internal self-test to complete.
// (Measured completion time was 0.65 seconds
// after reset, deploy, and stow sequence)
if (TEST_BLTOUCH()) { // If it still claims to be triggered...
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH);
stop(); // punt!
return true;
}
}
bltouch_command(deploy ? BLTOUCH_DEPLOY : BLTOUCH_STOW);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("set_bltouch_deployed(", deploy, ")");
return false;
}
#endif // BLTOUCH
/**
* Raise Z to a minimum height to make room for a probe to move
*/
@ -530,7 +503,7 @@ static bool do_probe_move(const float z, const float fr_mm_s) {
// Deploy BLTouch at the start of any probe
#if ENABLED(BLTOUCH)
if (set_bltouch_deployed(true)) return true;
if (bltouch.deploy()) return true;
#endif
// Disable stealthChop if used. Enable diag1 pin on driver.
@ -582,7 +555,7 @@ static bool do_probe_move(const float z, const float fr_mm_s) {
// Retract BLTouch immediately after a probe if it was triggered
#if ENABLED(BLTOUCH)
if (probe_triggered && set_bltouch_deployed(false)) return true;
if (probe_triggered && bltouch.stow()) return true;
#endif
// Clear endstop flags

10
Marlin/src/module/probe.h
View File

@ -57,13 +57,3 @@
#if QUIET_PROBING
void probing_pause(const bool p);
#endif
#if ENABLED(BLTOUCH)
void bltouch_command(int angle);
bool set_bltouch_deployed(const bool deploy);
FORCE_INLINE void bltouch_init() {
// Make sure any BLTouch error condition is cleared
bltouch_command(BLTOUCH_RESET);
set_bltouch_deployed(false);
}
#endif

13
Marlin/src/module/servo.h
View File

@ -44,9 +44,18 @@
#elif ENABLED(SWITCHING_NOZZLE)
#define SADATA SWITCHING_NOZZLE_SERVO_ANGLES
#define ASRC(N,E) (SWITCHING_NOZZLE_SERVO_NR == N ? asrc[E] : 0)
#elif defined(Z_SERVO_ANGLES) && defined(Z_PROBE_SERVO_NR)
#define SADATA Z_SERVO_ANGLES
#elif defined(Z_PROBE_SERVO_NR)
#define ASRC(N,E) (Z_PROBE_SERVO_NR == N ? asrc[E] : 0)
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
#endif
#ifdef BLTOUCH_ANGLES
#define SADATA BLTOUCH_ANGLES
#elif defined(Z_SERVO_ANGLES)
#define SADATA Z_SERVO_ANGLES
#else
#error "Servo angles are needed!"
#endif
#endif
#if ENABLED(EDITABLE_SERVO_ANGLES)

7
buildroot/share/tests/megaatmega2560-tests
View File

@ -264,7 +264,6 @@ exec_test $1 $2 "Many less common options"
# Test a full-featured CR-10S config
#
use_example_configs Creality/CR-10S
opt_enable SHOW_CUSTOM_BOOTSCREEN
exec_test $1 $2 "Full-featured CR-10S config"
#
# BQ Hephestos 2
@ -272,10 +271,10 @@ exec_test $1 $2 "Full-featured CR-10S config"
#use_example_configs Hephestos_2
#exec_test $1 $2 "Stuff"
#
# Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
# Delta Config (generic) + ABL bilinear + BLTOUCH
use_example_configs delta/generic
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
exec_test $1 $2 "Delta Config (generic) + ABL bilinear + PROBE_MANUALLY"
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_V3
exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH"
#
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
#

7
config/default/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/3DFabXYZ/Migbot/Configuration.h
View File

@ -823,6 +823,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/AlephObjects/TAZ4/Configuration.h
View File

@ -837,6 +837,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/AliExpress/CL-260/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/AliExpress/UM2pExt/Configuration.h
View File

@ -828,6 +828,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Anet/A2/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Anet/A2plus/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Anet/A6/Configuration.h
View File

@ -864,6 +864,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Anet/A8/Configuration.h
View File

@ -830,6 +830,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/AnyCubic/i3/Configuration.h
View File

@ -827,6 +827,13 @@
#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/ArmEd/Configuration.h
View File

@ -818,6 +818,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Azteeg/X5GT/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/BIBO/TouchX/cyclops/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/BIBO/TouchX/default/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/BQ/Hephestos/Configuration.h
View File

@ -805,6 +805,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/BQ/Hephestos_2/Configuration.h
View File

@ -818,6 +818,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/BQ/WITBOX/Configuration.h
View File

@ -805,6 +805,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Cartesio/Configuration.h
View File

@ -816,6 +816,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/CR-10/Configuration.h
View File

@ -827,6 +827,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/CR-10S/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/CR-10_5S/Configuration.h
View File

@ -818,6 +818,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/CR-10mini/Configuration.h
View File

@ -836,6 +836,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/CR-8/Configuration.h
View File

@ -827,6 +827,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/Ender-2/Configuration.h
View File

@ -821,6 +821,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/Ender-3/Configuration.h
View File

@ -821,6 +821,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Creality/Ender-4/Configuration.h
View File

@ -827,6 +827,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Einstart-S/Configuration.h
View File

@ -828,6 +828,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Felix/Configuration.h
View File

@ -799,6 +799,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Felix/DUAL/Configuration.h
View File

@ -799,6 +799,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/FlashForge/CreatorPro/Configuration.h
View File

@ -809,6 +809,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/FolgerTech/i3-2020/Configuration.h
View File

@ -823,6 +823,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Formbot/Raptor/Configuration.h
View File

@ -900,6 +900,13 @@
#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Formbot/T_Rex_2+/Configuration.h
View File

@ -846,6 +846,13 @@
#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif

7
config/examples/Formbot/T_Rex_3/Configuration.h
View File

@ -833,6 +833,13 @@
#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/A10M/Configuration.h
View File

@ -800,6 +800,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/A20M/Configuration.h
View File

@ -800,6 +800,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/GT2560/Configuration.h
View File

@ -832,6 +832,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/MeCreator2/Configuration.h
View File

@ -824,6 +824,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View File

@ -833,6 +833,13 @@
#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View File

@ -832,6 +832,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Infitary/i3-M508/Configuration.h
View File

@ -821,6 +821,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/JGAurora/A5/Configuration.h
View File

@ -829,6 +829,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/MakerParts/Configuration.h
View File

@ -837,6 +837,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Malyan/M150/Configuration.h
View File

@ -837,6 +837,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Malyan/M200/Configuration.h
View File

@ -816,6 +816,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Micromake/C1/basic/Configuration.h
View File

@ -821,6 +821,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Micromake/C1/enhanced/Configuration.h
View File

@ -821,6 +821,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Mks/Robin/Configuration.h
View File

@ -818,6 +818,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Mks/Sbase/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Printrbot/PrintrboardG2/Configuration.h
View File

@ -825,6 +825,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/RapideLite/RL200/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/RepRapPro/Huxley/Configuration.h
View File

@ -857,6 +857,13 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/RepRapWorld/Megatronics/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/RigidBot/Configuration.h
View File

@ -815,6 +815,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/SCARA/Configuration.h
View File

@ -830,6 +830,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/STM32F10/Configuration.h
View File

@ -819,6 +819,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/STM32F4/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Sanguinololu/Configuration.h
View File

@ -848,6 +848,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/TheBorg/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/TinyBoy2/Configuration.h
View File

@ -868,6 +868,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Tronxy/X1/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Tronxy/X3A/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Tronxy/X5S-2E/Configuration.h
View File

@ -838,6 +838,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Tronxy/X5S/Configuration.h
View File

@ -816,6 +816,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Tronxy/XY100/Configuration.h
View File

@ -828,6 +828,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/UltiMachine/Archim1/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/UltiMachine/Archim2/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/VORONDesign/Configuration.h
View File

@ -826,6 +826,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Velleman/K8200/Configuration.h
View File

@ -846,6 +846,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Velleman/K8400/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Velleman/K8400/Dual-head/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/WASP/PowerWASP/Configuration.h
View File

@ -836,6 +836,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/Wanhao/Duplicator 6/Configuration.h
View File

@ -827,6 +827,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/adafruit/ST7565/Configuration.h
View File

@ -817,6 +817,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/delta/Anycubic/Kossel/Configuration.h
View File

@ -953,6 +953,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View File

@ -899,6 +899,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/delta/FLSUN/kossel/Configuration.h
View File

@ -899,6 +899,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/delta/FLSUN/kossel_mini/Configuration.h
View File

@ -899,6 +899,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/delta/Geeetech/Rostock 301/Configuration.h
View File

@ -889,6 +889,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/delta/Hatchbox_Alpha/Configuration.h
View File

@ -904,6 +904,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

7
config/examples/delta/MKS/SBASE/Configuration.h
View File

@ -889,6 +889,13 @@
//#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

Some files were not shown because too many files have changed in this diff Show More