Creality v4.5.3 (CR-6 SE, CR-6 MAX) (#20468)
This commit is contained in:
Sebastiaan Dammann
Scott Lahteine
parent
1be16e3d8c
commit
686bb056a4
@ -330,10 +330,11 @@
|
||||
#define BOARD_CREALITY_V4 4037 // Creality v4.x (STM32F103RE)
|
||||
#define BOARD_CREALITY_V427 4038 // Creality v4.2.7 (STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 4039 // Creality v4.5.2 (STM32F103RE)
|
||||
#define BOARD_TRIGORILLA_PRO 4040 // Trigorilla Pro (STM32F103ZET6)
|
||||
#define BOARD_FLY_MINI 4041 // FLY MINI (STM32F103RCT6)
|
||||
#define BOARD_FLSUN_HISPEED 4042 // FLSUN HiSpeedV1 (STM32F103VET6)
|
||||
#define BOARD_BEAST 4043 // STM32F103RET6 Libmaple-based controller
|
||||
#define BOARD_CREALITY_V453 4040 // Creality v4.5.3 (STM32F103RE)
|
||||
#define BOARD_TRIGORILLA_PRO 4041 // Trigorilla Pro (STM32F103ZET6)
|
||||
#define BOARD_FLY_MINI 4042 // FLY MINI (STM32F103RCT6)
|
||||
#define BOARD_FLSUN_HISPEED 4043 // FLSUN HiSpeedV1 (STM32F103VET6)
|
||||
#define BOARD_BEAST 4044 // STM32F103RET6 Libmaple-based controller
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
||||
@ -532,6 +532,8 @@
|
||||
#include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#elif MB(CREALITY_V452)
|
||||
#include "stm32f1/pins_CREALITY_V452.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#elif MB(CREALITY_V453)
|
||||
#include "stm32f1/pins_CREALITY_V453.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#elif MB(TRIGORILLA_PRO)
|
||||
#include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro
|
||||
#elif MB(FLY_MINI)
|
||||
|
||||
@ -24,97 +24,15 @@
|
||||
* Creality v4.5.2 (STM32F103RET6) board pin assignments
|
||||
*/
|
||||
|
||||
#if NOT_TARGET(__STM32F1__)
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "CREALITY_V452 supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
||||
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "Creality v4.5.2 only supports one hotend / E-stepper. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Creality v4.5.2"
|
||||
#define DEFAULT_MACHINE_NAME "Creality3D"
|
||||
|
||||
//
|
||||
// Release PB4 (Z_STEP_PIN) from JTAG NRST role
|
||||
//
|
||||
#define DISABLE_DEBUG
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
|
||||
//#define SDCARD_EEPROM_EMULATION
|
||||
#endif
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
#define IIC_EEPROM_SDA PA11
|
||||
#define IIC_EEPROM_SCL PA12
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
|
||||
#elif ENABLED(SDCARD_EEPROM_EMULATION)
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC4
|
||||
#define Y_STOP_PIN PC5
|
||||
#define Z_STOP_PIN PA4
|
||||
|
||||
#define FIL_RUNOUT_PIN PA7
|
||||
|
||||
//
|
||||
// Probe
|
||||
//
|
||||
#define PROBE_TARE_PIN PA5
|
||||
#define PROBE_ENABLE_PIN PC6 // Optoswitch to Enable Z Probe
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC3
|
||||
#define X_STEP_PIN PB8
|
||||
#define X_DIR_PIN PB7
|
||||
|
||||
#define Y_ENABLE_PIN PC3
|
||||
#define Y_STEP_PIN PB6
|
||||
#define Y_DIR_PIN PB5
|
||||
|
||||
#define Z_ENABLE_PIN PC3
|
||||
#define Z_STEP_PIN PB4
|
||||
#define Z_DIR_PIN PB3
|
||||
|
||||
#define E0_ENABLE_PIN PC3
|
||||
#define E0_STEP_PIN PC2
|
||||
#define E0_DIR_PIN PB9
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PB1 // TH1
|
||||
#define TEMP_BED_PIN PB0 // TB1
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA1 // HEATER1
|
||||
#define HEATER_BED_PIN PA2 // HOT BED
|
||||
|
||||
#define FAN_PIN PA0 // FAN
|
||||
#define FAN_SOFT_PWM
|
||||
#define PROBE_ENABLE_PIN PC6 // Optoswitch to Enable Z Probe
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SD_DETECT_PIN PC7
|
||||
#define NO_SD_HOST_DRIVE // SD is only seen by the printer
|
||||
|
||||
#define SDIO_SUPPORT // Extra added by Creality
|
||||
#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define CASE_LIGHT_PIN PA6
|
||||
#include "pins_CREALITY_V45x.h"
|
||||
|
||||
38
Marlin/src/pins/stm32f1/pins_CREALITY_V453.h
Normal file
38
Marlin/src/pins/stm32f1/pins_CREALITY_V453.h
Normal file
@ -0,0 +1,38 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Creality v4.5.3 (STM32F103RET6) board pin assignments
|
||||
*/
|
||||
|
||||
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "Creality v4.5.3 only supports one hotend / E-stepper. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Creality v4.5.3"
|
||||
|
||||
#define HEATER_0_PIN PB14 // HEATER1
|
||||
#define HEATER_BED_PIN PB13 // HOT BED
|
||||
#define FAN_PIN PB15 // FAN
|
||||
#define PROBE_ENABLE_PIN PB2 // Optoswitch to Enable Z Probe
|
||||
|
||||
#include "pins_CREALITY_V45x.h"
|
||||
113
Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h
Normal file
113
Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h
Normal file
@ -0,0 +1,113 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Creality v4.5.2 and v4.5.3 (STM32F103RET6) board pin assignments
|
||||
*/
|
||||
|
||||
#if NOT_TARGET(__STM32F1__)
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define DEFAULT_MACHINE_NAME "Creality3D"
|
||||
|
||||
//
|
||||
// Release PB4 (Z_STEP_PIN) from JTAG NRST role
|
||||
//
|
||||
#define DISABLE_DEBUG
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
|
||||
//#define SDCARD_EEPROM_EMULATION
|
||||
#endif
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
#define IIC_EEPROM_SDA PA11
|
||||
#define IIC_EEPROM_SCL PA12
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
|
||||
#elif ENABLED(SDCARD_EEPROM_EMULATION)
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC4
|
||||
#define Y_STOP_PIN PC5
|
||||
#define Z_STOP_PIN PA4
|
||||
|
||||
#define FIL_RUNOUT_PIN PA7
|
||||
|
||||
//
|
||||
// Probe
|
||||
//
|
||||
#define PROBE_TARE_PIN PA5
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC3
|
||||
#define X_STEP_PIN PB8
|
||||
#define X_DIR_PIN PB7
|
||||
|
||||
#define Y_ENABLE_PIN PC3
|
||||
#define Y_STEP_PIN PB6
|
||||
#define Y_DIR_PIN PB5
|
||||
|
||||
#define Z_ENABLE_PIN PC3
|
||||
#define Z_STEP_PIN PB4
|
||||
#define Z_DIR_PIN PB3
|
||||
|
||||
#define E0_ENABLE_PIN PC3
|
||||
#define E0_STEP_PIN PC2
|
||||
#define E0_DIR_PIN PB9
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PB1 // TH1
|
||||
#define TEMP_BED_PIN PB0 // TB1
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
|
||||
#define FAN_SOFT_PWM
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SD_DETECT_PIN PC7
|
||||
#define NO_SD_HOST_DRIVE // SD is only seen by the printer
|
||||
|
||||
#define SDIO_SUPPORT // Extra added by Creality
|
||||
#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define CASE_LIGHT_PIN PA6
|
||||
Loading…
Reference in New Issue
Block a user