Update Czech translations (#11510)

This commit is contained in:
petrzjunior 2018-08-15 01:45:16 +02:00 committed by Scott Lahteine
parent b37bfeffeb
commit 67613bf5bd

View File

@ -43,6 +43,7 @@
#define MSG_SD_INSERTED _UxGT("Karta vložena")
#define MSG_SD_REMOVED _UxGT("Karta vyjmuta")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy")
#define MSG_MAIN _UxGT("Hlavní nabídka")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory")
@ -252,11 +253,13 @@
#define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk")
#define MSG_RESUME_PRINT _UxGT("Obnovit tisk")
#define MSG_STOP_PRINT _UxGT("Zastavit tisk")
#define MSG_POWER_LOSS_RECOVERY _UxGT("Obnova vypadku")
#define MSG_CARD_MENU _UxGT("Tisknout z SD")
#define MSG_NO_CARD _UxGT("Žádná SD karta")
#define MSG_DWELL _UxGT("Uspáno...")
#define MSG_USERWAIT _UxGT("Čekání na uživ...")
#define MSG_PRINT_PAUSED _UxGT("Tisk pozastaven")
#define MSG_PRINTING _UxGT("Tisknu...")
#define MSG_PRINT_ABORTED _UxGT("Tisk zrušen")
#define MSG_NO_MOVE _UxGT("Žádný pohyb.")
#define MSG_KILLED _UxGT("PŘERUSENO. ")
@ -292,8 +295,10 @@
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání")
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř. podl.")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA")
#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÍ SKOK")
#define MSG_THERMAL_RUNAWAY_BED _UxGT("PODL. TEPL. SKOK")
#define MSG_ERR_MAXTEMP _UxGT("VYSOKÁ TEPLOTA")
#define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA")
#define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.")
@ -305,7 +310,9 @@
#define MSG_SHORT_HOUR _UxGT("h")
#define MSG_SHORT_MINUTE _UxGT("m")
#define MSG_HEATING _UxGT("Zahřívání...")
#define MSG_COOLING _UxGT("Chlazení")
#define MSG_BED_HEATING _UxGT("Zahřívání podl...")
#define MSG_BED_COOLING _UxGT("Chlazení podl...")
#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrace")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovat X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y")
@ -314,6 +321,7 @@
#define MSG_DELTA_SETTINGS _UxGT("Delta nastavení")
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrace")
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.výšku delty")
#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Nast. Z-ofset")
#define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno")
#define MSG_DELTA_HEIGHT _UxGT("Výška")
#define MSG_DELTA_RADIUS _UxGT("Poloměr")