diff --git a/Marlin/src/HAL/HAL_DUE/HAL_Due.h b/Marlin/src/HAL/HAL_DUE/HAL_Due.h
index f3c50927f2..ab12a11e97 100644
--- a/Marlin/src/HAL/HAL_DUE/HAL_Due.h
+++ b/Marlin/src/HAL/HAL_DUE/HAL_Due.h
@@ -41,7 +41,15 @@
// Defines
//
#define NUM_SERIAL 1
-#define MYSERIAL0 customizedSerial
+
+//#undef SERIAL_PORT
+//#define SERIAL_PORT -1
+
+#if SERIAL_PORT == -1
+ #define MYSERIAL0 SerialUSB
+#else
+ #define MYSERIAL0 customizedSerial
+#endif
// We need the previous define before the include, or compilation bombs...
#include "MarlinSerial_Due.h"
diff --git a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
index 0f1aa47fc2..0f31ac7f58 100644
--- a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
+++ b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
@@ -53,7 +53,6 @@
// --------------------------------------------------------------------------
#if ENABLED(SOFTWARE_SPI)
-
// --------------------------------------------------------------------------
// software SPI
// --------------------------------------------------------------------------
@@ -494,77 +493,44 @@
static pfnSpiTxBlock spiTxBlock = spiTxBlockX;
static pfnSpiRxBlock spiRxBlock = spiRxBlockX;
- #if MB(ALLIGATOR) // control SDSS pin
- void spiBegin() {
- SET_OUTPUT(SS_PIN);
- WRITE(SS_PIN, HIGH);
- SET_OUTPUT(SCK_PIN);
- SET_INPUT(MISO_PIN);
- SET_OUTPUT(MOSI_PIN);
- }
+ void spiBegin() {
+ SET_OUTPUT(SS_PIN);
+ WRITE(SS_PIN, HIGH);
+ SET_OUTPUT(SCK_PIN);
+ SET_INPUT(MISO_PIN);
+ SET_OUTPUT(MOSI_PIN);
+ }
- uint8_t spiRec() {
- WRITE(SS_PIN, LOW);
- WRITE(MOSI_PIN, 1); /* Output 1s 1*/
- uint8_t b = spiTransferRx(0xFF);
- WRITE(SS_PIN, HIGH);
- return b;
- }
+ uint8_t spiRec() {
+ WRITE(SS_PIN, LOW);
+ WRITE(MOSI_PIN, 1); /* Output 1s 1*/
+ uint8_t b = spiTransferRx(0xFF);
+ WRITE(SS_PIN, HIGH);
+ return b;
+ }
- void spiRead(uint8_t* buf, uint16_t nbyte) {
- uint32_t todo = nbyte;
- if (todo == 0) return;
+ void spiRead(uint8_t* buf, uint16_t nbyte) {
+ uint32_t todo = nbyte;
+ if (todo == 0) return;
- WRITE(SS_PIN, LOW);
- WRITE(MOSI_PIN, 1); /* Output 1s 1*/
- spiRxBlock(buf,nbyte);
- WRITE(SS_PIN, HIGH);
- }
+ WRITE(SS_PIN, LOW);
+ WRITE(MOSI_PIN, 1); /* Output 1s 1*/
+ spiRxBlock(buf,nbyte);
+ WRITE(SS_PIN, HIGH);
+ }
- void spiSend(uint8_t b) {
- WRITE(SS_PIN, LOW);
- (void) spiTransferTx(b);
- WRITE(SS_PIN, HIGH);
- }
+ void spiSend(uint8_t b) {
+ WRITE(SS_PIN, LOW);
+ (void) spiTransferTx(b);
+ WRITE(SS_PIN, HIGH);
+ }
- void spiSendBlock(uint8_t token, const uint8_t* buf) {
- WRITE(SS_PIN, LOW);
- (void) spiTransferTx(token);
- spiTxBlock(buf,512);
- WRITE(SS_PIN, HIGH);
-
- #else // let calling routine control SDSS
- void spiBegin() {
- SET_OUTPUT(SS_PIN);
- SET_OUTPUT(SCK_PIN);
- SET_INPUT(MISO_PIN);
- SET_OUTPUT(MOSI_PIN);
- }
+ void spiSendBlock(uint8_t token, const uint8_t* buf) {
- uint8_t spiRec() {
- WRITE(MOSI_PIN, 1); /* Output 1s 1*/
- uint8_t b = spiTransferRx(0xFF);
- return b;
- }
-
- void spiRead(uint8_t* buf, uint16_t nbyte) {
- uint32_t todo = nbyte;
- if (todo == 0) return;
-
- WRITE(MOSI_PIN, 1); /* Output 1s 1*/
- spiRxBlock(buf,nbyte);
- }
-
- void spiSend(uint8_t b) {
- (void) spiTransferTx(b);
- }
-
- void spiSendBlock(uint8_t token, const uint8_t* buf) {
- (void) spiTransferTx(token);
- spiTxBlock(buf,512);
-
- #endif
-
+ WRITE(SS_PIN, LOW);
+ (void) spiTransferTx(token);
+ spiTxBlock(buf,512);
+ WRITE(SS_PIN, HIGH);
}
/**
@@ -600,9 +566,7 @@
break;
}
- #if MB(ALLIGATOR)
- WRITE(SS_PIN, HIGH);
- #endif
+ WRITE(SS_PIN, HIGH);
WRITE(MOSI_PIN, HIGH);
WRITE(SCK_PIN, LOW);
}
@@ -610,296 +574,211 @@
/** Begin SPI transaction, set clock, bit order, data mode */
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// TODO: to be implemented
+
}
#pragma GCC reset_options
#else
+ // --------------------------------------------------------------------------
+ // hardware SPI
+ // --------------------------------------------------------------------------
+ // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
+ int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
+ bool spiInitMaded = false;
- #if MB(ALLIGATOR)
-
- // slave selects controlled by SPI controller
- // doesn't support changing SPI speeds for SD card
-
- // --------------------------------------------------------------------------
- // hardware SPI
- // --------------------------------------------------------------------------
- // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
- int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
- bool spiInitMaded = false;
+ void spiBegin() {
+ if(spiInitMaded == false) {
+ // Configure SPI pins
+ PIO_Configure(
+ g_APinDescription[SCK_PIN].pPort,
+ g_APinDescription[SCK_PIN].ulPinType,
+ g_APinDescription[SCK_PIN].ulPin,
+ g_APinDescription[SCK_PIN].ulPinConfiguration);
+ PIO_Configure(
+ g_APinDescription[MOSI_PIN].pPort,
+ g_APinDescription[MOSI_PIN].ulPinType,
+ g_APinDescription[MOSI_PIN].ulPin,
+ g_APinDescription[MOSI_PIN].ulPinConfiguration);
+ PIO_Configure(
+ g_APinDescription[MISO_PIN].pPort,
+ g_APinDescription[MISO_PIN].ulPinType,
+ g_APinDescription[MISO_PIN].ulPin,
+ g_APinDescription[MISO_PIN].ulPinConfiguration);
- void spiBegin() {
- if(spiInitMaded == false) {
- // Configure SPI pins
- PIO_Configure(
- g_APinDescription[SCK_PIN].pPort,
- g_APinDescription[SCK_PIN].ulPinType,
- g_APinDescription[SCK_PIN].ulPin,
- g_APinDescription[SCK_PIN].ulPinConfiguration);
- PIO_Configure(
- g_APinDescription[MOSI_PIN].pPort,
- g_APinDescription[MOSI_PIN].ulPinType,
- g_APinDescription[MOSI_PIN].ulPin,
- g_APinDescription[MOSI_PIN].ulPinConfiguration);
- PIO_Configure(
- g_APinDescription[MISO_PIN].pPort,
- g_APinDescription[MISO_PIN].ulPinType,
- g_APinDescription[MISO_PIN].ulPin,
- g_APinDescription[MISO_PIN].ulPinConfiguration);
+ // set master mode, peripheral select, fault detection
+ SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
+ SPI_Enable(SPI0);
- // set master mode, peripheral select, fault detection
- SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
- SPI_Enable(SPI0);
+ #if MB(ALLIGATOR)
+ SET_OUTPUT(DAC0_SYNC);
+ #if EXTRUDERS > 1
+ SET_OUTPUT(DAC1_SYNC);
+ WRITE(DAC1_SYNC, HIGH);
+ #endif
+ SET_OUTPUT(SPI_EEPROM1_CS);
+ SET_OUTPUT(SPI_EEPROM2_CS);
+ SET_OUTPUT(SPI_FLASH_CS);
+ WRITE(DAC0_SYNC, HIGH);
+ WRITE(SPI_EEPROM1_CS, HIGH );
+ WRITE(SPI_EEPROM2_CS, HIGH );
+ WRITE(SPI_FLASH_CS, HIGH );
+ WRITE(SS_PIN, HIGH );
+ #endif // MB(ALLIGATOR)
- #if MB(ALLIGATOR)
- SET_OUTPUT(DAC0_SYNC);
- #if EXTRUDERS > 1
- SET_OUTPUT(DAC1_SYNC);
- WRITE(DAC1_SYNC, HIGH);
- #endif
- SET_OUTPUT(SPI_EEPROM1_CS);
- SET_OUTPUT(SPI_EEPROM2_CS);
- SET_OUTPUT(SPI_FLASH_CS);
- WRITE(DAC0_SYNC, HIGH);
- WRITE(SPI_EEPROM1_CS, HIGH );
- WRITE(SPI_EEPROM2_CS, HIGH );
- WRITE(SPI_FLASH_CS, HIGH );
- WRITE(SS_PIN, HIGH );
- #endif // MB(ALLIGATOR)
-
- OUT_WRITE(SDSS,0);
-
- PIO_Configure(
- g_APinDescription[SPI_PIN].pPort,
- g_APinDescription[SPI_PIN].ulPinType,
- g_APinDescription[SPI_PIN].ulPin,
- g_APinDescription[SPI_PIN].ulPinConfiguration);
-
- spiInit(1);
- spiInitMaded = true;
- }
+ PIO_Configure(
+ g_APinDescription[SPI_PIN].pPort,
+ g_APinDescription[SPI_PIN].ulPinType,
+ g_APinDescription[SPI_PIN].ulPin,
+ g_APinDescription[SPI_PIN].ulPinConfiguration);
+ spiInit(1);
+ spiInitMaded = true;
}
+ }
- void spiInit(uint8_t spiRate) {
- if(spiInitMaded == false) {
- if(spiRate > 6) spiRate = 1;
+ void spiInit(uint8_t spiRate) {
+ if(spiInitMaded == false) {
+ if(spiRate > 6) spiRate = 1;
- #if MB(ALLIGATOR)
- // Set SPI mode 1, clock, select not active after transfer, with delay between transfers
- SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC,
- SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
- SPI_CSR_DLYBCT(1));
- // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
- SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA |
- SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
- SPI_CSR_DLYBCT(1));
- #endif//MB(ALLIGATOR)
-
- // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
- SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA |
+ #if MB(ALLIGATOR)
+ // Set SPI mode 1, clock, select not active after transfer, with delay between transfers
+ SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC,
SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
SPI_CSR_DLYBCT(1));
- SPI_Enable(SPI0);
- spiInitMaded = true;
- }
- }
+ // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
+ SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA |
+ SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
+ SPI_CSR_DLYBCT(1));
+ #endif//MB(ALLIGATOR)
- // Write single byte to SPI
- void spiSend(byte b) {
- // write byte with address and end transmission flag
- SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
- // wait for transmit register empty
+ // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
+ SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA |
+ SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
+ SPI_CSR_DLYBCT(1));
+ SPI_Enable(SPI0);
+ spiInitMaded = true;
+ }
+ }
+
+ // Write single byte to SPI
+ void spiSend(byte b) {
+ // write byte with address and end transmission flag
+ SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
+ // wait for transmit register empty
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ // wait for receive register
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ // clear status
+ SPI0->SPI_RDR;
+ //delayMicroseconds(1U);
+ }
+
+ void spiSend(const uint8_t* buf, size_t n) {
+ if (n == 0) return;
+ for (size_t i = 0; i < n - 1; i++) {
+ SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- // wait for receive register
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // clear status
SPI0->SPI_RDR;
//delayMicroseconds(1U);
}
+ spiSend(buf[n - 1]);
+ }
- void spiSend(const uint8_t* buf, size_t n) {
- if (n == 0) return;
- for (size_t i = 0; i < n - 1; i++) {
- SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- SPI0->SPI_RDR;
- //delayMicroseconds(1U);
- }
- spiSend(buf[n - 1]);
- }
+ void spiSend(uint32_t chan, byte b) {
+ uint8_t dummy_read = 0;
+ // wait for transmit register empty
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ // write byte with address and end transmission flag
+ SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER;
+ // wait for receive register
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ // clear status
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
+ dummy_read = SPI0->SPI_RDR;
+ UNUSED(dummy_read);
+ }
- void spiSend(uint32_t chan, byte b) {
- uint8_t dummy_read = 0;
- // wait for transmit register empty
+ void spiSend(uint32_t chan, const uint8_t* buf, size_t n) {
+ uint8_t dummy_read = 0;
+ if (n == 0) return;
+ for (int i = 0; i < (int)n - 1; i++) {
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- // write byte with address and end transmission flag
- SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER;
- // wait for receive register
+ SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan);
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // clear status
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
dummy_read = SPI0->SPI_RDR;
UNUSED(dummy_read);
}
+ spiSend(chan, buf[n - 1]);
+ }
- void spiSend(uint32_t chan, const uint8_t* buf, size_t n) {
- uint8_t dummy_read = 0;
- if (n == 0) return;
- for (int i = 0; i < (int)n - 1; i++) {
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan);
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
- dummy_read = SPI0->SPI_RDR;
- UNUSED(dummy_read);
- }
- spiSend(chan, buf[n - 1]);
- }
+ // Read single byte from SPI
+ uint8_t spiRec() {
+ // write dummy byte with address and end transmission flag
+ SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
+ // wait for transmit register empty
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- // Read single byte from SPI
- uint8_t spiRec() {
- // write dummy byte with address and end transmission flag
- SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
- // wait for transmit register empty
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ // wait for receive register
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ // get byte from receive register
+ //delayMicroseconds(1U);
+ return SPI0->SPI_RDR;
+ }
- // wait for receive register
+ uint8_t spiRec(uint32_t chan) {
+ uint8_t spirec_tmp;
+ // wait for transmit register empty
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
+ spirec_tmp = SPI0->SPI_RDR;
+ UNUSED(spirec_tmp);
+
+ // write dummy byte with address and end transmission flag
+ SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER;
+
+ // wait for receive register
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ // get byte from receive register
+ return SPI0->SPI_RDR;
+ }
+
+ // Read from SPI into buffer
+ void spiRead(uint8_t*buf, uint16_t nbyte) {
+ if (nbyte-- == 0) return;
+
+ for (int i = 0; i < nbyte; i++) {
+ //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN);
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // get byte from receive register
+ buf[i] = SPI0->SPI_RDR;
//delayMicroseconds(1U);
- return SPI0->SPI_RDR;
}
+ buf[nbyte] = spiRec();
+ }
- uint8_t spiRec(uint32_t chan) {
- uint8_t spirec_tmp;
- // wait for transmit register empty
+ // Write from buffer to SPI
+ void spiSendBlock(uint8_t token, const uint8_t* buf) {
+ SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ //while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ //SPI0->SPI_RDR;
+ for (int i = 0; i < 511; i++) {
+ SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
- spirec_tmp = SPI0->SPI_RDR;
- UNUSED(spirec_tmp);
-
- // write dummy byte with address and end transmission flag
- SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER;
-
- // wait for receive register
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // get byte from receive register
- return SPI0->SPI_RDR;
+ SPI0->SPI_RDR;
+ //delayMicroseconds(1U);
}
+ spiSend(buf[511]);
+ }
- // Read from SPI into buffer
- void spiRead(uint8_t*buf, uint16_t nbyte) {
- if (nbyte-- == 0) return;
+ /** Begin SPI transaction, set clock, bit order, data mode */
+ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
+ // TODO: to be implemented
+ }
- for (int i = 0; i < nbyte; i++) {
- //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN);
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- buf[i] = SPI0->SPI_RDR;
- //delayMicroseconds(1U);
- }
- buf[nbyte] = spiRec();
- }
-
- // Write from buffer to SPI
- void spiSendBlock(uint8_t token, const uint8_t* buf) {
- SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- //while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- //SPI0->SPI_RDR;
- for (int i = 0; i < 511; i++) {
- SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- SPI0->SPI_RDR;
- //delayMicroseconds(1U);
- }
- spiSend(buf[511]);
- }
-
- /** Begin SPI transaction, set clock, bit order, data mode */
- void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
- // TODO: to be implemented
- }
-
- #else // U8G compatible hardware SPI
-
- void spiInit(uint8_t spiRate = 6 ) { // default to slowest rate if not specified)
- // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
- int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
- if(spiRate > 6) spiRate = 1;
-
- /* enable PIOA and SPI0 */
- REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
-
- /* disable PIO on A26 and A27 */
- REG_PIOA_PDR = 0x0c000000;
- OUT_WRITE(SDSS, 1);
-
- /* reset SPI0 (from sam lib) */
- SPI0->SPI_CR = SPI_CR_SPIDIS;
- SPI0->SPI_CR = SPI_CR_SWRST;
- SPI0->SPI_CR = SPI_CR_SWRST;
- SPI0->SPI_CR = SPI_CR_SPIEN;
-
-
- /* master mode, no fault detection, chip select 0 */
- SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS;
-
- /* SPI mode 0, 8 Bit data transfer, baud rate */
- SPI0->SPI_CSR[0] = SPI_CSR_SCBR(spiDueDividors[spiRate]) | 1;
- }
-
- static uint8_t spiTransfer(uint8_t data) {
-
- /* wait until tx register is empty */
- while( (SPI0->SPI_SR & SPI_SR_TDRE) == 0 );
- /* send data */
- SPI0->SPI_TDR = (uint32_t)data; // | SPI_PCS(0xF);
-
- // wait for transmit register empty
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
-
- // wait for receive register
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // get byte from receive register
- return SPI0->SPI_RDR;
- }
-
- void spiBegin() {
- spiInit();
- }
-
- uint8_t spiRec() {
- uint8_t data = spiTransfer(0xff);
- return data;
- }
-
- void spiRead(uint8_t*buf, uint16_t nbyte) {
- if (nbyte == 0) return;
- for (int i = 0; i < nbyte; i++) {
- buf[i] = spiTransfer(0xff);
- }
- }
-
- void spiSend(uint8_t data) {
- spiTransfer(data);
- }
-
- void spiSend(const uint8_t* buf, size_t n) {
- if (n == 0) return;
- for (uint16_t i = 0; i < n; i++)
- spiTransfer(buf[i]);
- }
-
- void spiSendBlock(uint8_t token, const uint8_t* buf) {
- spiTransfer(token);
- for (uint16_t i = 0; i < 512; i++)
- spiTransfer(buf[i]);
- }
-
- #endif //MB(ALLIGATOR)
#endif // ENABLED(SOFTWARE_SPI)
#endif // ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp
deleted file mode 100644
index 98c065fba3..0000000000
--- a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp
+++ /dev/null
@@ -1,163 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016, 2017, 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- *
- */
-
-
-/*
-
- based on u8g_com_msp430_hw_spi.c
-
- Universal 8bit Graphics Library
-
- Copyright (c) 2012, olikraus@gmail.com
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice, this list
- of conditions and the following disclaimer.
-
- * Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or other
- materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-
-#ifdef __SAM3X8E__
-
-// #include
-
-// #include "src/core/macros.h"
-// #include "Configuration.h"
-#include "../../Marlin.h"
-#include "../../inc/MarlinConfig.h"
-
- #include
-
- #define SPI_FULL_SPEED 0
- #define SPI_HALF_SPEED 1
- #define SPI_QUARTER_SPEED 2
- #define SPI_EIGHTH_SPEED 3
- #define SPI_SIXTEENTH_SPEED 4
- #define SPI_SPEED_5 5
- #define SPI_SPEED_6 6
-
- void spiBegin();
- void spiInit(uint8_t spiRate);
- void spiSend(uint8_t b);
- void spiSend(const uint8_t* buf, size_t n);
-
- #include
- #include "../../core/macros.h"
- #include "fastio_Due.h"
-
-
- void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
- PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
- g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
- }
-
- void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
- volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
- uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
- if (level) port->PIO_SODR = mask;
- else port->PIO_CODR = mask;
- }
-
- uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
- {
- switch(msg)
- {
- case U8G_COM_MSG_STOP:
- break;
-
- case U8G_COM_MSG_INIT:
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, 1);
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, 1);
-
- u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_CS);
- u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_A0);
-
- u8g_Delay(5);
-
- spiBegin();
-
- #ifndef SPI_SPEED
- #define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
- #endif
- spiInit(2);
-
- break;
-
- case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, arg_val);
- break;
-
- case U8G_COM_MSG_CHIP_SELECT:
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, (arg_val ? 0 : 1));
- break;
-
- case U8G_COM_MSG_RESET:
- break;
-
- case U8G_COM_MSG_WRITE_BYTE:
-
- spiSend((uint8_t)arg_val);
- break;
-
- case U8G_COM_MSG_WRITE_SEQ: {
- uint8_t *ptr = (uint8_t*) arg_ptr;
- while (arg_val > 0) {
- spiSend(*ptr++);
- arg_val--;
- }
- }
- break;
-
- case U8G_COM_MSG_WRITE_SEQ_P: {
- uint8_t *ptr = (uint8_t*) arg_ptr;
- while (arg_val > 0) {
- spiSend(*ptr++);
- arg_val--;
- }
- }
- break;
- }
- return 1;
- }
-
-#endif //__SAM3X8E__
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index d82f8c493b..2530bfb0a4 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -125,7 +125,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-#define SERIAL_PORT -1
+#define SERIAL_PORT 0
/**
* Select a secondary serial port on the board to use for communication with the host.
@@ -134,7 +134,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-#define SERIAL_PORT_2 0
+#define SERIAL_PORT_2 -1
/**
* This setting determines the communication speed of the printer.
diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp
index 94b27abce2..67471cb80e 100644
--- a/Marlin/src/gcode/queue.cpp
+++ b/Marlin/src/gcode/queue.cpp
@@ -517,7 +517,7 @@ void advance_command_queue() {
card.closefile();
SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED);
- #if !defined(__AVR__) || !defined(USBCON)
+ #ifndef USBCON
#if ENABLED(SERIAL_STATS_DROPPED_RX)
SERIAL_ECHOLNPAIR("Dropped bytes: ", customizedSerial.dropped());
#endif
@@ -525,7 +525,7 @@ void advance_command_queue() {
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
SERIAL_ECHOLNPAIR("Max RX Queue Size: ", customizedSerial.rxMaxEnqueued());
#endif
- #endif // !defined(__AVR__) || !defined(USBCON)
+ #endif // !USBCON
ok_to_send();
}
diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h
index 289f174373..bfefb8991c 100644
--- a/Marlin/src/inc/Conditionals_adv.h
+++ b/Marlin/src/inc/Conditionals_adv.h
@@ -28,7 +28,7 @@
#ifndef CONDITIONALS_ADV_H
#define CONDITIONALS_ADV_H
- #if !defined(__AVR__) || !defined(USBCON)
+ #ifndef USBCON
// Define constants and variables for buffering serial data.
// Use only 0 or powers of 2 greater than 1
// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index fe7ca7553c..93fee1b4d7 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -275,7 +275,7 @@
/**
* Serial
*/
-#if !defined(__AVR__) || !defined(USBCON)
+#ifndef USBCON
#if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
#error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
#elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
@@ -1308,7 +1308,7 @@ static_assert(1 >= 0
/**
* emergency-command parser
*/
-#if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON)
+#if ENABLED(EMERGENCY_PARSER) && defined(USBCON)
#error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
#endif
diff --git a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
deleted file mode 100644
index f7ff3aca0b..0000000000
--- a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
+++ /dev/null
@@ -1,189 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016, 2017, 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- *
- */
-
-
-/*
-
- based on u8g_dev_uc1701_mini12864_HAL.c (dealextreme)
-
- Universal 8bit Graphics Library
-
- Copyright (c) 2011, olikraus@gmail.com
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice, this list
- of conditions and the following disclaimer.
-
- * Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or other
- materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-*/
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(DOGLCD)
-
-#include
-
-#include "HAL_LCD_com_defines.h"
-
-#define WIDTH 128
-#define HEIGHT 64
-#define PAGE_HEIGHT 8
-
-static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
- U8G_ESC_CS(0), /* disable chip */
- U8G_ESC_ADR(0), /* instruction mode */
- U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
- U8G_ESC_CS(1), /* enable chip */
-
- 0x0e2, /* soft reset */
- 0x040, /* set display start line to 0 */
- 0x0a0, /* ADC set to reverse */
- 0x0c8, /* common output mode */
- 0x0a6, /* display normal, bit val 0: LCD pixel off. */
- 0x0a2, /* LCD bias 1/9 */
- 0x02f, /* all power control circuits on */
- 0x0f8, /* set booster ratio to */
- 0x000, /* 4x */
- 0x023, /* set V0 voltage resistor ratio to large */
- 0x081, /* set contrast */
- 0x027, /* contrast value */
- 0x0ac, /* indicator */
- 0x000, /* disable */
- 0x0af, /* display on */
-
- U8G_ESC_DLY(100), /* delay 100 ms */
- 0x0a5, /* display all points, ST7565 */
- U8G_ESC_DLY(100), /* delay 100 ms */
- U8G_ESC_DLY(100), /* delay 100 ms */
- 0x0a4, /* normal display */
- U8G_ESC_CS(0), /* disable chip */
- U8G_ESC_END /* end of sequence */
-};
-
-static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
- U8G_ESC_ADR(0), /* instruction mode */
- U8G_ESC_CS(1), /* enable chip */
- 0x010, /* set upper 4 bit of the col adr to 0 */
- 0x000, /* set lower 4 bit of the col adr to 4 */
- U8G_ESC_END /* end of sequence */
-};
-
-uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
- switch(msg)
- {
- case U8G_DEV_MSG_INIT:
- u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
- u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
- break;
- case U8G_DEV_MSG_STOP:
- break;
- case U8G_DEV_MSG_PAGE_NEXT:
- {
- u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
- u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
- u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page */
- u8g_SetAddress(u8g, dev, 1); /* data mode */
- if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
- return 0;
- u8g_SetChipSelect(u8g, dev, 0);
- }
- break;
- case U8G_DEV_MSG_CONTRAST:
- u8g_SetChipSelect(u8g, dev, 1);
- u8g_SetAddress(u8g, dev, 0); /* instruction mode */
- u8g_WriteByte(u8g, dev, 0x081);
- u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
- u8g_SetChipSelect(u8g, dev, 0);
- return 1;
- }
- return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
-}
-
-uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
- switch(msg)
- {
- case U8G_DEV_MSG_INIT:
- u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
- u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
- break;
- case U8G_DEV_MSG_STOP:
- break;
- case U8G_DEV_MSG_PAGE_NEXT:
- {
- u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-
- u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
- u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page */
- u8g_SetAddress(u8g, dev, 1); /* data mode */
- u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)pb->buf);
- u8g_SetChipSelect(u8g, dev, 0);
-
- u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
- u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page */
- u8g_SetAddress(u8g, dev, 1); /* data mode */
- u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
- u8g_SetChipSelect(u8g, dev, 0);
- }
- break;
- case U8G_DEV_MSG_CONTRAST:
- u8g_SetChipSelect(u8g, dev, 1);
- u8g_SetAddress(u8g, dev, 0); /* instruction mode */
- u8g_WriteByte(u8g, dev, 0x081);
- u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
- u8g_SetChipSelect(u8g, dev, 0);
- return 1;
- }
- return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
-}
-
-U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_SW_SPI_FN);
-U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_HW_SPI_FN);
-
-uint8_t u8g_dev_uc1701_mini12864_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;
-u8g_pb_t u8g_dev_uc1701_mini12864_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1701_mini12864_HAL_2x_buf};
-u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN };
-u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_hw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN };
-
-#endif // DOGLCD
\ No newline at end of file
diff --git a/Marlin/src/pins/pins_DUE3DOM_MINI.h b/Marlin/src/pins/pins_DUE3DOM_MINI.h
index 9695e3ae42..7ea23835a1 100644
--- a/Marlin/src/pins/pins_DUE3DOM_MINI.h
+++ b/Marlin/src/pins/pins_DUE3DOM_MINI.h
@@ -156,16 +156,5 @@
#define BTN_ENC 37
#define BEEPER_PIN -1
-
- #elif ENABLED(MINIPANEL)
- #define BTN_EN1 52
- #define BTN_EN2 50
- #define BTN_ENC 48
- #define LCD_SDSS 4
- #define SD_DETECT_PIN 14
- #define BEEPER_PIN 41
- #define DOGLCD_A0 46
- #define DOGLCD_CS 45
-
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD
diff --git a/Marlin/src/pins/pins_RAMPS_FD_V1.h b/Marlin/src/pins/pins_RAMPS_FD_V1.h
index 98003889ad..0a632cfb31 100644
--- a/Marlin/src/pins/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h
@@ -140,58 +140,23 @@
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
- // ramps-fd lcd adaptor
-
- #if ENABLED(DOGLCD)
- #define BEEPER_PIN 37
- #define BTN_EN1 33
- #define BTN_EN2 31
- #define BTN_ENC 35
- #define SD_DETECT_PIN 49
- #endif
-
#if ENABLED(NEWPANEL)
+ // ramps-fd lcd adaptor
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
+
+ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+ #define BEEPER_PIN 37
+
+ #define BTN_EN1 33
+ #define BTN_EN2 31
+ #define BTN_ENC 35
+
+ #define SD_DETECT_PIN 49
+ #endif
#endif
-
- #if ENABLED(MINIPANEL)
- #define DOGLCD_CS 25
- #define DOGLCD_A0 27
- #endif
#endif // ULTRA_LCD
-
-#if ENABLED(HAVE_TMC2208)
- /**
- * TMC2208 stepper drivers
- *
- * Hardware serial communication ports.
- * If undefined software serial is used according to the pins below
- */
- //#define X_HARDWARE_SERIAL Serial1
- //#define X2_HARDWARE_SERIAL Serial1
- //#define Y_HARDWARE_SERIAL Serial1
- //#define Y2_HARDWARE_SERIAL Serial1
- //#define Z_HARDWARE_SERIAL Serial1
- //#define Z2_HARDWARE_SERIAL Serial1
- //#define E0_HARDWARE_SERIAL Serial1
- //#define E1_HARDWARE_SERIAL Serial1
- //#define E2_HARDWARE_SERIAL Serial1
- //#define E3_HARDWARE_SERIAL Serial1
- //#define E4_HARDWARE_SERIAL Serial1
-#endif
-
-//
-// M3/M4/M5 - Spindle/Laser Control
-//
-#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
- #if HOTENDS < 3
- #define SPINDLE_LASER_ENABLE_PIN 45 // Use E2 ENA
- #define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM
- #define SPINDLE_DIR_PIN 47 // Use E2 DIR
- #endif
-#endif
diff --git a/Marlin/src/pins/pins_RAMPS_FD_V2.h b/Marlin/src/pins/pins_RAMPS_FD_V2.h
index f33546e637..2d2375f060 100644
--- a/Marlin/src/pins/pins_RAMPS_FD_V2.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V2.h
@@ -36,11 +36,3 @@
#undef INVERTED_FAN_PINS
#define I2C_EEPROM
-
-#ifndef PS_ON_PIN
- #define PS_ON_PIN 12
-#endif
-
-#ifndef FILWIDTH_PIN
- #define FILWIDTH_PIN 5 // Analog Input on AUX2
-#endif