bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🌐 Skip non-essential translations

Browse Source
This commit is contained in:
Scott Lahteine
2021-09-19 19:25:01 -05:00
parent 6014dd9c7b
commit 669b68497c
28 changed files with 30 additions and 311 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bitmaps.h
View File

@@ -256,4 +256,4 @@ namespace Theme {
constexpr PROGMEM uint32_t UTF8_FONT_OFFSET = 10000;
constexpr PROGMEM uint32_t BACKGROUND_OFFSET = 40000;
}; // namespace Theme
} // namespace Theme

2
Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.cpp
View File

@@ -385,7 +385,7 @@ namespace Theme {
{CHACK},
{SILENCE, END_SONG, 0}
};
}; // namespace Theme
} // namespace Theme
#define N_ELEMENTS(a) (sizeof(a)/sizeof(a[0]))

2
Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.h
View File

@@ -40,4 +40,4 @@ namespace Theme {
extern const PROGMEM SoundPlayer::sound_t warble[];
extern const PROGMEM SoundPlayer::sound_t carousel[];
extern const PROGMEM SoundPlayer::sound_t all_instruments[];
}; // namespace Theme
} // namespace Theme

3
Marlin/src/lcd/language/language_an.h
View File

@@ -177,9 +177,6 @@ namespace Language_an {
LSTR MSG_ERR_MINTEMP = _UxGT("Error: Temp Min");
LSTR MSG_HALTED = _UxGT("IMPRESORA ATURADA");
LSTR MSG_PLEASE_RESET = _UxGT("Per favor reinic.");
LSTR MSG_SHORT_DAY = _UxGT("d");
LSTR MSG_SHORT_HOUR = _UxGT("h");
LSTR MSG_SHORT_MINUTE = _UxGT("m");
LSTR MSG_HEATING = _UxGT("Calentando...");
LSTR MSG_BED_HEATING = _UxGT("Calentando base...");
LSTR MSG_DELTA_CALIBRATE = _UxGT("Calibracion Delta");

3
Marlin/src/lcd/language/language_ca.h
View File

@@ -165,9 +165,6 @@ namespace Language_ca {
LSTR MSG_ERR_MINTEMP = _UxGT("Err: TEMP MINIMA");
LSTR MSG_HALTED = _UxGT("IMPRESSORA PARADA");
LSTR MSG_PLEASE_RESET = _UxGT("Reinicieu");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Escalfant...");
LSTR MSG_BED_HEATING = _UxGT("Escalfant llit...");
LSTR MSG_DELTA_CALIBRATE = _UxGT("Calibratge Delta");

9
Marlin/src/lcd/language/language_cz.h
View File

@@ -420,9 +420,6 @@ namespace Language_cz {
LSTR MSG_ERR_MINTEMP = _UxGT("NÍZKA TEPLOTA");
LSTR MSG_HALTED = _UxGT("TISK. ZASTAVENA");
LSTR MSG_PLEASE_RESET = _UxGT("Proveďte reset");
LSTR MSG_SHORT_DAY = _UxGT("d");
LSTR MSG_SHORT_HOUR = _UxGT("h");
LSTR MSG_SHORT_MINUTE = _UxGT("m");
LSTR MSG_HEATING = _UxGT("Zahřívání...");
LSTR MSG_COOLING = _UxGT("Chlazení...");
#if LCD_WIDTH >= 20
@@ -602,12 +599,6 @@ namespace Language_cz {
LSTR MSG_SERVICE_RESET = _UxGT("Reset");
LSTR MSG_SERVICE_IN = _UxGT(" za:");
LSTR MSG_BACKLASH = _UxGT("Vůle");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korekce");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Vyhlazení");
}

3
Marlin/src/lcd/language/language_da.h
View File

@@ -144,9 +144,6 @@ namespace Language_da {
LSTR MSG_ERR_MINTEMP = _UxGT("Fejl: Min temp");
LSTR MSG_HALTED = _UxGT("PRINTER STOPPET");
LSTR MSG_PLEASE_RESET = _UxGT("Reset Venligst");
LSTR MSG_SHORT_DAY = _UxGT("d"); // Kun et bogstav
LSTR MSG_SHORT_HOUR = _UxGT("h"); // Kun et bogstav
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // Kun et bogstav
LSTR MSG_HEATING = _UxGT("Opvarmer...");
LSTR MSG_BED_HEATING = _UxGT("Opvarmer plade...");
LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Kalibrering");

7
Marlin/src/lcd/language/language_de.h
View File

@@ -35,7 +35,6 @@ namespace Language_de {
LSTR LANGUAGE = _UxGT("Deutsch");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" bereit");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("JA");
LSTR MSG_NO = _UxGT("NEIN");
LSTR MSG_BACK = _UxGT("Zurück");
@@ -630,12 +629,6 @@ namespace Language_de {
LSTR MSG_SERVICE_RESET = _UxGT("Reset");
LSTR MSG_SERVICE_IN = _UxGT(" im:");
LSTR MSG_BACKLASH = _UxGT("Spiel");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrektur");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Glätten");
LSTR MSG_LEVEL_X_AXIS = _UxGT("X Achse leveln");

43
Marlin/src/lcd/language/language_en.h
View File

@@ -47,8 +47,8 @@ namespace Language_en {
constexpr uint8_t CHARSIZE = 2;
LSTR LANGUAGE = _UxGT("English");
// These strings should be translated
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Ready.");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("YES");
LSTR MSG_NO = _UxGT("NO");
LSTR MSG_BACK = _UxGT("Back");
@@ -339,16 +339,6 @@ namespace Language_en {
LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune failed. Bad extruder.");
LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune failed. Temperature too high.");
LSTR MSG_PID_TIMEOUT = _UxGT("Autotune failed! Timeout.");
LSTR MSG_PID_P = _UxGT("PID-P");
LSTR MSG_PID_P_E = _UxGT("PID-P *");
LSTR MSG_PID_I = _UxGT("PID-I");
LSTR MSG_PID_I_E = _UxGT("PID-I *");
LSTR MSG_PID_D = _UxGT("PID-D");
LSTR MSG_PID_D_E = _UxGT("PID-D *");
LSTR MSG_PID_C = _UxGT("PID-C");
LSTR MSG_PID_C_E = _UxGT("PID-C *");
LSTR MSG_PID_F = _UxGT("PID-F");
LSTR MSG_PID_F_E = _UxGT("PID-F *");
LSTR MSG_SELECT = _UxGT("Select");
LSTR MSG_SELECT_E = _UxGT("Select *");
LSTR MSG_ACC = _UxGT("Accel");
@@ -542,9 +532,6 @@ namespace Language_en {
LSTR MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP");
LSTR MSG_HALTED = _UxGT("PRINTER HALTED");
LSTR MSG_PLEASE_RESET = _UxGT("Please Reset");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Heating...");
LSTR MSG_COOLING = _UxGT("Cooling...");
LSTR MSG_BED_HEATING = _UxGT("Bed Heating...");
@@ -727,12 +714,6 @@ namespace Language_en {
LSTR MSG_SERVICE_RESET = _UxGT("Reset");
LSTR MSG_SERVICE_IN = _UxGT(" in:");
LSTR MSG_BACKLASH = _UxGT("Backlash");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Correction");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Smoothing");
@@ -764,6 +745,28 @@ namespace Language_en {
LSTR MSG_SD_CARD = _UxGT("SD Card");
LSTR MSG_USB_DISK = _UxGT("USB Disk");
// These strings can be the same in all languages
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_PID_P = _UxGT("PID-P");
LSTR MSG_PID_P_E = _UxGT("PID-P *");
LSTR MSG_PID_I = _UxGT("PID-I");
LSTR MSG_PID_I_E = _UxGT("PID-I *");
LSTR MSG_PID_D = _UxGT("PID-D");
LSTR MSG_PID_D_E = _UxGT("PID-D *");
LSTR MSG_PID_C = _UxGT("PID-C");
LSTR MSG_PID_C_E = _UxGT("PID-C *");
LSTR MSG_PID_F = _UxGT("PID-F");
LSTR MSG_PID_F_E = _UxGT("PID-F *");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
}
#if FAN_COUNT == 1

10
Marlin/src/lcd/language/language_es.h
View File

@@ -35,7 +35,6 @@ namespace Language_es {
LSTR LANGUAGE = _UxGT("Spanish");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Lista");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("SI");
LSTR MSG_NO = _UxGT("NO");
LSTR MSG_BACK = _UxGT("Atrás");
@@ -427,9 +426,6 @@ namespace Language_es {
LSTR MSG_ERR_MINTEMP = _UxGT("Err:TEMP. MIN");
LSTR MSG_HALTED = _UxGT("IMPRESORA DETENIDA");
LSTR MSG_PLEASE_RESET = _UxGT("Por favor, reinicie");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Calentando...");
LSTR MSG_COOLING = _UxGT("Enfriando...");
LSTR MSG_BED_HEATING = _UxGT("Calentando Cama...");
@@ -588,12 +584,6 @@ namespace Language_es {
LSTR MSG_SERVICE_RESET = _UxGT("Reiniciar");
LSTR MSG_SERVICE_IN = _UxGT(" dentro:");
LSTR MSG_BACKLASH = _UxGT("Backlash");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Corrección");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Suavizado");

3
Marlin/src/lcd/language/language_eu.h
View File

@@ -252,9 +252,6 @@ namespace Language_eu {
LSTR MSG_ERR_MINTEMP = _UxGT("Err: Tenp Minimoa");
LSTR MSG_HALTED = _UxGT("INPRIMA. GELDIRIK");
LSTR MSG_PLEASE_RESET = _UxGT("Berrabia. Mesedez");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Berotzen...");
LSTR MSG_BED_HEATING = _UxGT("Ohea Berotzen...");
LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Kalibraketa");

6
Marlin/src/lcd/language/language_fr.h
View File

@@ -625,12 +625,6 @@ namespace Language_fr {
LSTR MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop activé");
LSTR MSG_SERVICE_RESET = _UxGT("Réinit.");
LSTR MSG_SERVICE_IN = _UxGT(" dans:");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Correction");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Lissage");

10
Marlin/src/lcd/language/language_gl.h
View File

@@ -37,7 +37,6 @@ namespace Language_gl {
LSTR LANGUAGE = _UxGT("Galician");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" lista.");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("SI");
LSTR MSG_NO = _UxGT("NON");
LSTR MSG_BACK = _UxGT("Atrás");
@@ -443,9 +442,6 @@ namespace Language_gl {
LSTR MSG_ERR_MINTEMP = _UxGT("Erro:TEMP MÍN");
LSTR MSG_HALTED = _UxGT("IMPRESORA DETIDA");
LSTR MSG_PLEASE_RESET = _UxGT("Debe reiniciar!");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Quentando...");
LSTR MSG_COOLING = _UxGT("Arrefriando...");
LSTR MSG_BED_HEATING = _UxGT("Quentando cama...");
@@ -605,12 +601,6 @@ namespace Language_gl {
LSTR MSG_SERVICE_RESET = _UxGT("Reiniciar");
LSTR MSG_SERVICE_IN = _UxGT(" dentro:");
LSTR MSG_BACKLASH = _UxGT("Reacción");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Corrección");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Suavizado");

1
Marlin/src/lcd/language/language_hr.h
View File

@@ -166,6 +166,5 @@ namespace Language_hr {
#else
// Up to 2 lines allowed
LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT("Pričekaj...");
//LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("?", "?"));
#endif
}

17
Marlin/src/lcd/language/language_hu.h
View File

@@ -40,7 +40,6 @@ namespace Language_hu {
LSTR LANGUAGE = _UxGT("Magyar");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Kész.");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("IGEN");
LSTR MSG_NO = _UxGT("NEM");
LSTR MSG_BACK = _UxGT("Vissza");
@@ -317,16 +316,6 @@ namespace Language_hu {
LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Hangolási hiba. Rossz adagoló.");
LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Hangolási hiba. Magas hömérséklet.");
LSTR MSG_PID_TIMEOUT = _UxGT("Hangolási hiba! Idötúllépés.");
LSTR MSG_PID_P = _UxGT("PID-P");
LSTR MSG_PID_P_E = _UxGT("PID-P *");
LSTR MSG_PID_I = _UxGT("PID-I");
LSTR MSG_PID_I_E = _UxGT("PID-I *");
LSTR MSG_PID_D = _UxGT("PID-D");
LSTR MSG_PID_D_E = _UxGT("PID-D *");
LSTR MSG_PID_C = _UxGT("PID-C");
LSTR MSG_PID_C_E = _UxGT("PID-C *");
LSTR MSG_PID_F = _UxGT("PID-F");
LSTR MSG_PID_F_E = _UxGT("PID-F *");
LSTR MSG_SELECT = _UxGT("Kiválaszt");
LSTR MSG_SELECT_E = _UxGT("Kiválaszt *");
LSTR MSG_ACC = _UxGT("Gyorsítás");
@@ -703,12 +692,6 @@ namespace Language_hu {
LSTR MSG_SERVICE_RESET = _UxGT("Újraindítás");
LSTR MSG_SERVICE_IN = _UxGT(" be:");
LSTR MSG_BACKLASH = _UxGT("Holtjáték");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrekció");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Simítás");

7
Marlin/src/lcd/language/language_it.h
View File

@@ -44,7 +44,6 @@ namespace Language_it {
LSTR LANGUAGE = _UxGT("Italiano");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" pronta.");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("Si");
LSTR MSG_NO = _UxGT("No");
LSTR MSG_BACK = _UxGT("Indietro");
@@ -700,12 +699,6 @@ namespace Language_it {
LSTR MSG_SERVICE_IN = _UxGT(" tra:");
LSTR MSG_BACKLASH = _UxGT("Gioco");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Correzione");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Appianamento");

3
Marlin/src/lcd/language/language_jp_kana.h
View File

@@ -192,9 +192,6 @@ namespace Language_jp_kana {
LSTR MSG_ERR_MINTEMP = _UxGT("エラー:サイテイオンミマン"); // "Err: MINTEMP"
LSTR MSG_HALTED = _UxGT("プリンターハテイシシマシタ"); // "PRINTER HALTED"
LSTR MSG_PLEASE_RESET = _UxGT("リセットシテクダサイ"); // "Please reset"
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("カネツチュウ"); // "Heating..."
LSTR MSG_BED_HEATING = _UxGT("ベッド カネツチュウ"); // "Bed Heating..."
LSTR MSG_DELTA_CALIBRATE = _UxGT("デルタ コウセイ"); // "Delta Calibration"

3
Marlin/src/lcd/language/language_nl.h
View File

@@ -166,9 +166,6 @@ namespace Language_nl {
LSTR MSG_ERR_MINTEMP = _UxGT("Err: Min. temp");
LSTR MSG_HALTED = _UxGT("PRINTER GESTOPT");
LSTR MSG_PLEASE_RESET = _UxGT("Reset A.U.B.");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only. Keep English standard
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Voorwarmen...");
LSTR MSG_BED_HEATING = _UxGT("Bed voorverw...");
LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Calibratie");

155
Marlin/src/lcd/language/language_pl.h
View File

@@ -44,7 +44,6 @@ namespace Language_pl {
LSTR LANGUAGE = _UxGT("Polski");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" gotowy.");
//LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("TAK");
LSTR MSG_NO = _UxGT("NIE");
LSTR MSG_BACK = _UxGT("Wstecz");
@@ -56,7 +55,6 @@ namespace Language_pl {
LSTR MSG_MEDIA_READ_ERROR = _UxGT("Bład odczytu karty");
LSTR MSG_MEDIA_USB_REMOVED = _UxGT("Urządzenie USB usunięte");
LSTR MSG_MEDIA_USB_FAILED = _UxGT("Błąd uruchomienia USB");
//LSTR MSG_KILL_SUBCALL_OVERFLOW = _UxGT("Subcall Overflow");
LSTR MSG_LCD_ENDSTOPS = _UxGT("Krańców."); // Max length 8 characters
LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Progr. Krańcówki");
LSTR MSG_MAIN = _UxGT("Menu główne");
@@ -71,7 +69,6 @@ namespace Language_pl {
LSTR MSG_AUTO_HOME_Y = _UxGT("Zeruj Y");
LSTR MSG_AUTO_HOME_Z = _UxGT("Zeruj Z");
LSTR MSG_AUTO_Z_ALIGN = _UxGT("Autowyrównanie Z");
//LSTR MSG_ITERATION = _UxGT("G34 Iteration: %i");
LSTR MSG_DECREASING_ACCURACY = _UxGT("Spadek dokładności!");
LSTR MSG_ACCURACY_ACHIEVED = _UxGT("Osiągnięto dokładność");
LSTR MSG_LEVEL_BED_HOMING = _UxGT("Pozycja zerowa");
@@ -80,12 +77,8 @@ namespace Language_pl {
LSTR MSG_LEVEL_BED_DONE = _UxGT("Wypoziomowano!");
LSTR MSG_Z_FADE_HEIGHT = _UxGT("Wys. zanikania");
LSTR MSG_SET_HOME_OFFSETS = _UxGT("Ust. poz. zer.");
//LSTR MSG_HOME_OFFSET_X = _UxGT("Home Offset X");
//LSTR MSG_HOME_OFFSET_Y = _UxGT("Home Offset Y");
//LSTR MSG_HOME_OFFSET_Z = _UxGT("Home Offset Z");
LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("Poz. zerowa ust.");
LSTR MSG_SET_ORIGIN = _UxGT("Ustaw punkt zero");
//LSTR MSG_TRAMMING_WIZARD = _UxGT("Tramming Wizard");
LSTR MSG_SELECT_ORIGIN = _UxGT("Wybierz punkt zero");
LSTR MSG_LAST_VALUE_SP = _UxGT("Poprzednia wartość ");
#if PREHEAT_COUNT
@@ -113,15 +106,6 @@ namespace Language_pl {
LSTR MSG_SPINDLE_MENU = _UxGT("Sterowanie wrzeciona");
LSTR MSG_LASER_POWER = _UxGT("Zasilanie Lasera");
LSTR MSG_SPINDLE_POWER = _UxGT("Zasilanie wrzeciona");
//LSTR MSG_LASER_TOGGLE = _UxGT("Toggle Laser");
//LSTR MSG_LASER_EVAC_TOGGLE = _UxGT("Toggle Blower");
//LSTR MSG_LASER_ASSIST_TOGGLE = _UxGT("Air Assist");
//LSTR MSG_LASER_PULSE_MS = _UxGT("Test Pulse ms");
//LSTR MSG_LASER_FIRE_PULSE = _UxGT("Fire Pulse");
//LSTR MSG_FLOWMETER_FAULT = _UxGT("Coolant Flow Fault");
//LSTR MSG_SPINDLE_TOGGLE = _UxGT("Toggle Spindle");
//LSTR MSG_SPINDLE_EVAC_TOGGLE = _UxGT("Toggle Vacuum");
//LSTR MSG_SPINDLE_FORWARD = _UxGT("Spindle Forward");
LSTR MSG_SPINDLE_REVERSE = _UxGT("Rewers wrzeciona");
LSTR MSG_SWITCH_PS_ON = _UxGT("Włącz zasilacz");
LSTR MSG_SWITCH_PS_OFF = _UxGT("Wyłącz zasilacz");
@@ -131,10 +115,6 @@ namespace Language_pl {
LSTR MSG_BED_LEVELING = _UxGT("Poziomowanie stołu");
LSTR MSG_LEVEL_BED = _UxGT("Wypoziomuj stół");
LSTR MSG_BED_TRAMMING = _UxGT("Narożniki poziomowania");
//LSTR MSG_BED_TRAMMING_RAISE = _UxGT("Raise Bed Until Probe Triggered");
//LSTR MSG_BED_TRAMMING_IN_RANGE = _UxGT("All Corners Within Tolerance. Level Bed");
//LSTR MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Good Points: ");
//LSTR MSG_BED_TRAMMING_LAST_Z = _UxGT("Last Z: ");
LSTR MSG_NEXT_CORNER = _UxGT("Nastepny narożnik");
LSTR MSG_MESH_EDITOR = _UxGT("Edytor siatki");
LSTR MSG_EDIT_MESH = _UxGT("Edycja siatki");
@@ -146,7 +126,6 @@ namespace Language_pl {
LSTR MSG_CUSTOM_COMMANDS = _UxGT("Własne Polecenia");
LSTR MSG_M48_TEST = _UxGT("M48 Test sondy");
LSTR MSG_M48_POINT = _UxGT("M48 Punky");
//LSTR MSG_M48_OUT_OF_BOUNDS = _UxGT("Probe out of bounds");
LSTR MSG_M48_DEVIATION = _UxGT("Odchylenie");
LSTR MSG_IDEX_MENU = _UxGT("Tryb IDEX");
LSTR MSG_OFFSETS_MENU = _UxGT("Przesunięcie narzędzia");
@@ -154,16 +133,13 @@ namespace Language_pl {
LSTR MSG_IDEX_MODE_DUPLICATE = _UxGT("Duplikowanie");
LSTR MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("Kopia lustrzana");
LSTR MSG_IDEX_MODE_FULL_CTRL = _UxGT("Pełne sterowanie");
//LSTR MSG_IDEX_DUPE_GAP = _UxGT("Duplicate X-Gap");
LSTR MSG_HOTEND_OFFSET_X = _UxGT("2ga dysza X");
LSTR MSG_HOTEND_OFFSET_Y = _UxGT("2ga dysza Y");
LSTR MSG_HOTEND_OFFSET_Z = _UxGT("2ga dysza Z");
LSTR MSG_UBL_DOING_G29 = _UxGT("Wykonywanie G29");
LSTR MSG_UBL_TOOLS = _UxGT("Narzędzia UBL");
//LSTR MSG_UBL_LEVEL_BED = _UxGT("Unified Bed Leveling");
LSTR MSG_LCD_TILTING_MESH = _UxGT("Punkt pochylenia");
LSTR MSG_UBL_MANUAL_MESH = _UxGT("Ręczne Budowanie Siatki");
//LSTR MSG_UBL_MESH_WIZARD = _UxGT("UBL Mesh Wizard");
LSTR MSG_UBL_BC_INSERT = _UxGT("Umieść podkładkę i zmierz");
LSTR MSG_UBL_BC_INSERT2 = _UxGT("Zmierz");
LSTR MSG_UBL_BC_REMOVE = _UxGT("Usuń & Zmierz Stół");
@@ -247,8 +223,6 @@ namespace Language_pl {
LSTR MSG_SET_LEDS_WHITE = _UxGT("Biały");
LSTR MSG_SET_LEDS_DEFAULT = _UxGT("Domyślny");
LSTR MSG_LED_CHANNEL_N = _UxGT("Kanał =");
//LSTR MSG_LEDS2 = _UxGT("Lights #2");
//LSTR MSG_NEO2_PRESETS = _UxGT("Light #2 Presets");
LSTR MSG_NEO2_BRIGHTNESS = _UxGT("Jasność");
LSTR MSG_CUSTOM_LEDS = _UxGT("Własne światła");
LSTR MSG_INTENSITY_R = _UxGT("Czerwony");
@@ -277,29 +251,17 @@ namespace Language_pl {
LSTR MSG_BED_Z = _UxGT("Stół Z");
LSTR MSG_NOZZLE = _UxGT("Dysza");
LSTR MSG_NOZZLE_N = _UxGT("Dysza ~");
//LSTR MSG_NOZZLE_PARKED = _UxGT("Nozzle Parked");
LSTR MSG_NOZZLE_STANDBY = _UxGT("Dysza w oczekiwaniu");
LSTR MSG_BED = _UxGT("Stół");
LSTR MSG_CHAMBER = _UxGT("Obudowa");
//LSTR MSG_COOLER = _UxGT("Laser Coolant");
//LSTR MSG_COOLER_TOGGLE = _UxGT("Toggle Cooler");
//LSTR MSG_FLOWMETER_SAFETY = _UxGT("Flow Safety");
//LSTR MSG_LASER = _UxGT("Laser");
LSTR MSG_FAN_SPEED = _UxGT("Obroty wentylatora");
LSTR MSG_FAN_SPEED_N = _UxGT("Obroty wentylatora ~");
//LSTR MSG_STORED_FAN_N = _UxGT("Stored Fan ~");
LSTR MSG_EXTRA_FAN_SPEED = _UxGT("Obroty dodatkowego wentylatora");
LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("Obroty dodatkowego wentylatora ~");
LSTR MSG_CONTROLLER_FAN = _UxGT("Wentylator kontrolera");
//LSTR MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("Idle Speed");
//LSTR MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("Auto Mode");
//LSTR MSG_CONTROLLER_FAN_SPEED = _UxGT("Active Speed");
//LSTR MSG_CONTROLLER_FAN_DURATION = _UxGT("Idle Period");
LSTR MSG_FLOW = _UxGT("Przepływ");
LSTR MSG_FLOW_N = _UxGT("Przepływ ~");
LSTR MSG_CONTROL = _UxGT("Ustawienia");
//LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min");
//LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max");
LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Mnożnik");
LSTR MSG_AUTOTEMP = _UxGT("Auto. temperatura");
LSTR MSG_LCD_ON = _UxGT("Wł.");
@@ -307,19 +269,6 @@ namespace Language_pl {
LSTR MSG_PID_AUTOTUNE = _UxGT("PID Autostrojenie");
LSTR MSG_PID_AUTOTUNE_E = _UxGT("PID Autostrojenie *");
LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("Strojenie PID zakończone");
//LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune failed. Bad extruder.");
//LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune failed. Temperature too high.");
//LSTR MSG_PID_TIMEOUT = _UxGT("Autotune failed! Timeout.");
//LSTR MSG_PID_P = _UxGT("PID-P");
//LSTR MSG_PID_P_E = _UxGT("PID-P *");
//LSTR MSG_PID_I = _UxGT("PID-I");
//LSTR MSG_PID_I_E = _UxGT("PID-I *");
//LSTR MSG_PID_D = _UxGT("PID-D");
//LSTR MSG_PID_D_E = _UxGT("PID-D *");
//LSTR MSG_PID_C = _UxGT("PID-C");
//LSTR MSG_PID_C_E = _UxGT("PID-C *");
//LSTR MSG_PID_F = _UxGT("PID-F");
//LSTR MSG_PID_F_E = _UxGT("PID-F *");
LSTR MSG_SELECT = _UxGT("Wybierz");
LSTR MSG_SELECT_E = _UxGT("Wybierz *");
LSTR MSG_ACC = _UxGT("Przyspieszenie");
@@ -331,7 +280,6 @@ namespace Language_pl {
LSTR MSG_VJ_JERK = _UxGT("Zryw V") LCD_STR_J;
LSTR MSG_VK_JERK = _UxGT("Zryw V") LCD_STR_K;
LSTR MSG_VE_JERK = _UxGT("Zryw Ve");
//LSTR MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev");
LSTR MSG_VELOCITY = _UxGT("Prędkość (V)");
LSTR MSG_VTRAV_MIN = _UxGT("Vskok min");
@@ -340,7 +288,6 @@ namespace Language_pl {
LSTR MSG_A_RETRACT = _UxGT("A-wycofanie");
LSTR MSG_A_TRAVEL = _UxGT("A-przesuń.");
LSTR MSG_XY_FREQUENCY_LIMIT = _UxGT("Częstotliwość max");
//LSTR MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Feed min");
LSTR MSG_STEPS_PER_MM = _UxGT("kroki/mm");
LSTR MSG_A_STEPS = LCD_STR_A _UxGT(" kroki/mm");
LSTR MSG_B_STEPS = LCD_STR_B _UxGT(" kroki/mm");
@@ -352,39 +299,28 @@ namespace Language_pl {
LSTR MSG_EN_STEPS = _UxGT("* kroki/mm");
LSTR MSG_TEMPERATURE = _UxGT("Temperatura");
LSTR MSG_MOTION = _UxGT("Ruch");
//LSTR MSG_FILAMENT = _UxGT("Filament");
LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E w mm") SUPERSCRIPT_THREE;
//LSTR MSG_VOLUMETRIC_LIMIT = _UxGT("E Limit in mm") SUPERSCRIPT_THREE;
//LSTR MSG_VOLUMETRIC_LIMIT_E = _UxGT("E Limit *");
LSTR MSG_FILAMENT_DIAM = _UxGT("Śr. fil.");
LSTR MSG_FILAMENT_DIAM_E = _UxGT("Śr. fil. *");
LSTR MSG_FILAMENT_UNLOAD = _UxGT("Wysuń mm");
LSTR MSG_FILAMENT_LOAD = _UxGT("Wsuń mm");
//LSTR MSG_ADVANCE_K = _UxGT("Advance K");
//LSTR MSG_ADVANCE_K_E = _UxGT("Advance K *");
LSTR MSG_CONTRAST = _UxGT("Kontrast LCD");
LSTR MSG_STORE_EEPROM = _UxGT("Zapisz w pamięci");
LSTR MSG_LOAD_EEPROM = _UxGT("Wczytaj z pamięci");
LSTR MSG_RESTORE_DEFAULTS = _UxGT("Ustaw. fabryczne");
LSTR MSG_INIT_EEPROM = _UxGT("Initializuj EEPROM");
//LSTR MSG_ERR_EEPROM_CRC = _UxGT("EEPROM CRC Error");
//LSTR MSG_ERR_EEPROM_INDEX = _UxGT("EEPROM Index Error");
//LSTR MSG_ERR_EEPROM_VERSION = _UxGT("EEPROM Version Error");
//LSTR MSG_SETTINGS_STORED = _UxGT("Settings Stored");
LSTR MSG_MEDIA_UPDATE = _UxGT("Uaktualnij kartę");
LSTR MSG_RESET_PRINTER = _UxGT("Resetuj drukarkę");
LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Odswież");
LSTR MSG_INFO_SCREEN = _UxGT("Ekran główny");
LSTR MSG_PREPARE = _UxGT("Przygotuj");
LSTR MSG_TUNE = _UxGT("Strojenie");
//LSTR MSG_POWER_MONITOR = _UxGT("Power monitor");
LSTR MSG_CURRENT = _UxGT("Natężenie");
LSTR MSG_VOLTAGE = _UxGT("Napięcie");
LSTR MSG_POWER = _UxGT("Moc");
LSTR MSG_START_PRINT = _UxGT("Start wydruku");
LSTR MSG_BUTTON_NEXT = _UxGT("Następny");
LSTR MSG_BUTTON_INIT = _UxGT("Inic.");
//LSTR MSG_BUTTON_STOP = _UxGT("Stop");
LSTR MSG_BUTTON_PRINT = _UxGT("Drukuj");
LSTR MSG_BUTTON_RESET = _UxGT("Resetuj");
LSTR MSG_BUTTON_IGNORE = _UxGT("Ignoruj");
@@ -396,9 +332,7 @@ namespace Language_pl {
LSTR MSG_PAUSING = _UxGT("Wstrzymywanie...");
LSTR MSG_PAUSE_PRINT = _UxGT("Wstrzymaj druk");
LSTR MSG_RESUME_PRINT = _UxGT("Wznowienie");
//LSTR MSG_HOST_START_PRINT = _UxGT("Host Start");
LSTR MSG_STOP_PRINT = _UxGT("Stop");
//LSTR MSG_END_LOOPS = _UxGT("End Repeat Loops");
LSTR MSG_PRINTING_OBJECT = _UxGT("Drukowanie obiektu");
LSTR MSG_CANCEL_OBJECT = _UxGT("Anunuj obiekt");
LSTR MSG_CANCEL_OBJECT_N = _UxGT("Anunuj obiekt =");
@@ -420,26 +354,14 @@ namespace Language_pl {
LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Skok Z mm");
LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("Cof. wycof. mm");
LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Z Cof. wyc. mm");
//LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Unretract V");
LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Cof. wycof. V");
LSTR MSG_AUTORETRACT = _UxGT("Auto. wycofanie");
LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("Długość zmiany");
//LSTR MSG_FILAMENT_SWAP_EXTRA = _UxGT("Swap Extra");
LSTR MSG_FILAMENT_PURGE_LENGTH = _UxGT("Długość oczyszczania");
LSTR MSG_TOOL_CHANGE = _UxGT("Zmiana narzędzia");
LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Podniesienie Z");
LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Prędkość napełniania");
LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Prędkość wycofania");
//LSTR MSG_FILAMENT_PARK_ENABLED = _UxGT("Park Head");
//LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Recover Speed");
//LSTR MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("Fan Speed");
//LSTR MSG_SINGLENOZZLE_FAN_TIME = _UxGT("Fan Time");
//LSTR MSG_TOOL_MIGRATION_ON = _UxGT("Auto ON");
//LSTR MSG_TOOL_MIGRATION_OFF = _UxGT("Auto OFF");
//LSTR MSG_TOOL_MIGRATION = _UxGT("Tool Migration");
//LSTR MSG_TOOL_MIGRATION_AUTO = _UxGT("Auto-migration");
//LSTR MSG_TOOL_MIGRATION_END = _UxGT("Last Extruder");
//LSTR MSG_TOOL_MIGRATION_SWAP = _UxGT("Migrate to *");
LSTR MSG_FILAMENTCHANGE = _UxGT("Zmień filament");
LSTR MSG_FILAMENTCHANGE_E = _UxGT("Zmień filament *");
LSTR MSG_FILAMENTLOAD = _UxGT("Wsuń Filament");
@@ -452,35 +374,12 @@ namespace Language_pl {
LSTR MSG_RELEASE_MEDIA = _UxGT("Zwolnienie karty");
LSTR MSG_ZPROBE_OUT = _UxGT("Sonda Z za stołem");
LSTR MSG_SKEW_FACTOR = _UxGT("Współczynik skrzywienia");
//LSTR MSG_BLTOUCH = _UxGT("BLTouch");
LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Self-Test");
LSTR MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch");
//LSTR MSG_BLTOUCH_STOW = _UxGT("Stow");
//LSTR MSG_BLTOUCH_DEPLOY = _UxGT("Deploy");
//LSTR MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode");
//LSTR MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode");
//LSTR MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode");
//LSTR MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store");
//LSTR MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V");
//LSTR MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD");
//LSTR MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain");
LSTR MSG_BLTOUCH_MODE_CHANGE = _UxGT("UWAGA: Złe ustawienia mogą uszkodzić drukarkę. Kontynuować?");
//LSTR MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
//LSTR MSG_TOUCHMI_INIT = _UxGT("Init TouchMI");
//LSTR MSG_TOUCHMI_ZTEST = _UxGT("Z Offset Test");
//LSTR MSG_TOUCHMI_SAVE = _UxGT("Save");
//LSTR MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("Deploy TouchMI");
//LSTR MSG_MANUAL_DEPLOY = _UxGT("Deploy Z-Probe");
//LSTR MSG_MANUAL_STOW = _UxGT("Stow Z-Probe");
LSTR MSG_HOME_FIRST = _UxGT("Najpierw Home %s%s%s");
//LSTR MSG_ZPROBE_OFFSETS = _UxGT("Probe Offsets");
//LSTR MSG_ZPROBE_XOFFSET = _UxGT("Probe X Offset");
//LSTR MSG_ZPROBE_YOFFSET = _UxGT("Probe Y Offset");
LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Offset Z");
LSTR MSG_MOVE_NOZZLE_TO_BED = _UxGT("Przesuń dyszę do stołu");
//LSTR MSG_BABYSTEP_X = _UxGT("Babystep X");
//LSTR MSG_BABYSTEP_Y = _UxGT("Babystep Y");
//LSTR MSG_BABYSTEP_Z = _UxGT("Babystep Z");
LSTR MSG_BABYSTEP_TOTAL = _UxGT("Łącznie");
LSTR MSG_ENDSTOP_ABORT = _UxGT("Błąd krańcówki");
LSTR MSG_HEATING_FAILED_LCD = _UxGT("Rozgrz. nieudane");
@@ -488,24 +387,17 @@ namespace Language_pl {
LSTR MSG_THERMAL_RUNAWAY = _UxGT("ZANIK TEMPERATURY");
LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("ZANIK TEMP. STOŁU");
LSTR MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ZANIK TEMP.KOMORY");
//LSTR MSG_THERMAL_RUNAWAY_COOLER = _UxGT("Cooler Runaway");
//LSTR MSG_COOLING_FAILED = _UxGT("Cooling Failed");
LSTR MSG_ERR_MAXTEMP = _UxGT("Błąd: MAXTEMP");
LSTR MSG_ERR_MINTEMP = _UxGT("Błąd: MINTEMP");
LSTR MSG_HALTED = _UxGT("Drukarka zatrzym.");
LSTR MSG_PLEASE_RESET = _UxGT("Proszę zresetować");
//LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("g"); // One character only
//LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Rozgrzewanie...");
LSTR MSG_COOLING = _UxGT("Chłodzenie...");
LSTR MSG_BED_HEATING = _UxGT("Rozgrzewanie stołu...");
LSTR MSG_BED_COOLING = _UxGT("Chłodzenie stołu...");
//LSTR MSG_PROBE_HEATING = _UxGT("Probe Heating...");
//LSTR MSG_PROBE_COOLING = _UxGT("Probe Cooling...");
LSTR MSG_CHAMBER_HEATING = _UxGT("Rozgrzewanie komory...");
LSTR MSG_CHAMBER_COOLING = _UxGT("Chłodzenie komory...");
//LSTR MSG_LASER_COOLING = _UxGT("Laser Cooling...");
LSTR MSG_DELTA_CALIBRATE = _UxGT("Kalibrowanie Delty");
LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Kalibruj X");
LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibruj Y");
@@ -523,9 +415,7 @@ namespace Language_pl {
LSTR MSG_3POINT_LEVELING = _UxGT("Poziomowanie 3-punktowe");
LSTR MSG_LINEAR_LEVELING = _UxGT("Poziomowanie liniowe");
LSTR MSG_BILINEAR_LEVELING = _UxGT("Poziomowanie biliniowe");
//LSTR MSG_UBL_LEVELING = _UxGT("Unified Bed Leveling");
LSTR MSG_MESH_LEVELING = _UxGT("Poziomowanie siatką");
//LSTR MSG_MESH_DONE = _UxGT("Mesh probing done");
LSTR MSG_INFO_STATS_MENU = _UxGT("Statystyki");
LSTR MSG_INFO_BOARD_MENU = _UxGT("Info płyty");
LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Termistory");
@@ -534,7 +424,6 @@ namespace Language_pl {
LSTR MSG_INFO_PROTOCOL = _UxGT("Protokół");
LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("Zegar pracy: OFF");
LSTR MSG_INFO_RUNAWAY_ON = _UxGT("Zegar pracy: ON");
//LSTR MSG_HOTEND_IDLE_TIMEOUT = _UxGT("Hotend Idle Timeout");
LSTR MSG_CASE_LIGHT = _UxGT("Oświetlenie obudowy");
LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Jasność oświetlenia");
@@ -554,8 +443,6 @@ namespace Language_pl {
LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Użyty fil.");
#endif
//LSTR MSG_INFO_MIN_TEMP = _UxGT("Min Temp");
//LSTR MSG_INFO_MAX_TEMP = _UxGT("Max Temp");
LSTR MSG_INFO_PSU = _UxGT("Zasilacz");
LSTR MSG_DRIVE_STRENGTH = _UxGT("Siła silnika");
LSTR MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Siła %");
@@ -581,7 +468,6 @@ namespace Language_pl {
LSTR MSG_LCD_PROBING_FAILED = _UxGT("Sondowanie nieudane");
LSTR MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("WYBIERZ FILAMENT");
//LSTR MSG_MMU2_MENU = _UxGT("MMU");
LSTR MSG_KILL_MMU2_FIRMWARE = _UxGT("Uaktualnij firmware MMU!");
LSTR MSG_MMU2_NOT_RESPONDING = _UxGT("MMU wymaga uwagi.");
LSTR MSG_MMU2_RESUME = _UxGT("Wznów wydruk");
@@ -596,7 +482,6 @@ namespace Language_pl {
LSTR MSG_MMU2_EJECTING_FILAMENT = _UxGT("Wysuwanie fil. ...");
LSTR MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Wysuwanie fil....");
LSTR MSG_MMU2_ALL = _UxGT("Wszystko");
//LSTR MSG_MMU2_FILAMENT_N = _UxGT("Filament ~");
LSTR MSG_MMU2_RESET = _UxGT("Resetuj MMU");
LSTR MSG_MMU2_RESETTING = _UxGT("Resetowanie MMU...");
LSTR MSG_MMU2_EJECT_RECOVER = _UxGT("Usuń, kliknij");
@@ -604,30 +489,12 @@ namespace Language_pl {
LSTR MSG_MIX = _UxGT("Miks");
LSTR MSG_MIX_COMPONENT_N = _UxGT("Komponent =");
LSTR MSG_MIXER = _UxGT("Mikser");
//LSTR MSG_GRADIENT = _UxGT("Gradient");
LSTR MSG_FULL_GRADIENT = _UxGT("Pełny gradient");
LSTR MSG_TOGGLE_MIX = _UxGT("Przełacz miks");
//LSTR MSG_CYCLE_MIX = _UxGT("Cycle Mix");
//LSTR MSG_GRADIENT_MIX = _UxGT("Gradient Mix");
LSTR MSG_REVERSE_GRADIENT = _UxGT("Odwrotny gradient");
//LSTR MSG_ACTIVE_VTOOL = _UxGT("Active V-tool");
//LSTR MSG_START_VTOOL = _UxGT("Start V-tool");
//LSTR MSG_END_VTOOL = _UxGT(" End V-tool");
//LSTR MSG_GRADIENT_ALIAS = _UxGT("Alias V-tool");
//LSTR MSG_RESET_VTOOLS = _UxGT("Reset V-tools");
//LSTR MSG_COMMIT_VTOOL = _UxGT("Commit V-tool Mix");
//LSTR MSG_VTOOLS_RESET = _UxGT("V-tools Were Reset");
//LSTR MSG_START_Z = _UxGT("Start Z:");
//LSTR MSG_END_Z = _UxGT(" End Z:");
LSTR MSG_GAMES = _UxGT("Gry");
//LSTR MSG_BRICKOUT = _UxGT("Brickout");
//LSTR MSG_INVADERS = _UxGT("Invaders");
//LSTR MSG_SNAKE = _UxGT("Sn4k3");
//LSTR MSG_MAZE = _UxGT("Maze");
//LSTR MSG_BAD_PAGE = _UxGT("Bad page index");
//LSTR MSG_BAD_PAGE_SPEED = _UxGT("Bad page speed");
LSTR MSG_EDIT_PASSWORD = _UxGT("Zmień hasło");
LSTR MSG_LOGIN_REQUIRED = _UxGT("Wymagane zalogowanie");
@@ -671,40 +538,18 @@ namespace Language_pl {
#endif
LSTR MSG_TMC_DRIVERS = _UxGT("Sterowniki TMC");
LSTR MSG_TMC_CURRENT = _UxGT("Prąd sterownika");
//LSTR MSG_TMC_HYBRID_THRS = _UxGT("Hybrid Threshold");
LSTR MSG_TMC_HOMING_THRS = _UxGT("Zerowanie bezczujnikowe");
//LSTR MSG_TMC_STEPPING_MODE = _UxGT("Stepping Mode");
//LSTR MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop Enabled");
//LSTR MSG_SERVICE_RESET = _UxGT("Reset");
//LSTR MSG_SERVICE_IN = _UxGT(" in:");
//LSTR MSG_BACKLASH = _UxGT("Backlash");
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korekcja");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Wygładzanie");
LSTR MSG_LEVEL_X_AXIS = _UxGT("Wypoziomuj oś X");
LSTR MSG_AUTO_CALIBRATE = _UxGT("Autokalibracja");
#if ENABLED(TOUCH_UI_FTDI_EVE)
//LSTR MSG_HEATER_TIMEOUT = _UxGT("Idle timeout, temperature decreased. Press Okay to reheat and again to resume.");
#else
//LSTR MSG_HEATER_TIMEOUT = _UxGT("Heater Timeout");
#endif
//LSTR MSG_REHEAT = _UxGT("Reheat");
//LSTR MSG_REHEATING = _UxGT("Reheating...");
//LSTR MSG_PROBE_WIZARD = _UxGT("Z Probe Wizard");
//LSTR MSG_PROBE_WIZARD_PROBING = _UxGT("Probing Z Reference");
//LSTR MSG_PROBE_WIZARD_MOVING = _UxGT("Moving to Probing Pos");
LSTR MSG_SOUND = _UxGT("Dźwięk");
//LSTR MSG_TOP_LEFT = _UxGT("Top Left");
//LSTR MSG_BOTTOM_LEFT = _UxGT("Bottom Left");
//LSTR MSG_TOP_RIGHT = _UxGT("Top Right");
//LSTR MSG_BOTTOM_RIGHT = _UxGT("Bottom Right");
LSTR MSG_CALIBRATION_COMPLETED = _UxGT("Kalibracja zakończona");
LSTR MSG_CALIBRATION_FAILED = _UxGT("Kalibracja nie powiodła się");
//LSTR MSG_DRIVER_BACKWARD = _UxGT(" driver backward");
}
#if FAN_COUNT == 1

3
Marlin/src/lcd/language/language_pt_br.h
View File

@@ -365,9 +365,6 @@ namespace Language_pt_br {
LSTR MSG_ERR_MINTEMP = _UxGT("Erro:Temp Mínima");
LSTR MSG_HALTED = _UxGT("IMPRESSORA PAROU");
LSTR MSG_PLEASE_RESET = _UxGT("Favor resetar");
LSTR MSG_SHORT_DAY = _UxGT("d");
LSTR MSG_SHORT_HOUR = _UxGT("h");
LSTR MSG_SHORT_MINUTE = _UxGT("m");
LSTR MSG_HEATING = _UxGT("Aquecendo...");
LSTR MSG_COOLING = _UxGT("Resfriando...");
LSTR MSG_BED_HEATING = _UxGT("Aquecendo mesa...");

10
Marlin/src/lcd/language/language_ro.h
View File

@@ -36,7 +36,6 @@ namespace Language_ro {
LSTR LANGUAGE = _UxGT("Romanian");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Pregatit.");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("DA");
LSTR MSG_NO = _UxGT("NU");
LSTR MSG_BACK = _UxGT("Inapoi");
@@ -449,9 +448,6 @@ namespace Language_ro {
LSTR MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP");
LSTR MSG_HALTED = _UxGT("PRINTER HALTED");
LSTR MSG_PLEASE_RESET = _UxGT("Please Reset");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Heating...");
LSTR MSG_COOLING = _UxGT("Cooling...");
LSTR MSG_BED_HEATING = _UxGT("Bed Heating...");
@@ -618,12 +614,6 @@ namespace Language_ro {
LSTR MSG_SERVICE_RESET = _UxGT("Reset");
LSTR MSG_SERVICE_IN = _UxGT(" in:");
LSTR MSG_BACKLASH = _UxGT("Backlash");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Corectare");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Smoothing");

6
Marlin/src/lcd/language/language_ru.h
View File

@@ -40,9 +40,9 @@ namespace Language_ru {
LSTR MSG_NO = _UxGT("Нет");
LSTR MSG_BACK = _UxGT("Назад");
LSTR MSG_MEDIA_ABORTING = _UxGT("Прерывание...");
LSTR MSG_MEDIA_INSERTED = _UxGT("SD-карта вставлена");
LSTR MSG_MEDIA_REMOVED = _UxGT("SD-карта извлечена");
LSTR MSG_MEDIA_WAITING = _UxGT("Вставьте SD-карту");
LSTR MSG_MEDIA_INSERTED = _UxGT("SD карта вставлена");
LSTR MSG_MEDIA_REMOVED = _UxGT("SD карта извлечена");
LSTR MSG_MEDIA_WAITING = _UxGT("Вставьте SD карту");
#if LCD_WIDTH > 21
LSTR MSG_SD_INIT_FAIL = _UxGT("Сбой инициализации SD");
#else

9
Marlin/src/lcd/language/language_sk.h
View File

@@ -530,9 +530,6 @@ namespace Language_sk {
LSTR MSG_ERR_MINTEMP = _UxGT("Chyba: MINTEMP");
LSTR MSG_HALTED = _UxGT("TLAČIAREŇ ZASTAVENÁ");
LSTR MSG_PLEASE_RESET = _UxGT("Reštartuje ju");
LSTR MSG_SHORT_DAY = _UxGT("d");
LSTR MSG_SHORT_HOUR = _UxGT("h");
LSTR MSG_SHORT_MINUTE = _UxGT("m");
LSTR MSG_HEATING = _UxGT("Ohrev...");
LSTR MSG_COOLING = _UxGT("Ochladzovanie...");
LSTR MSG_BED_HEATING = _UxGT("Ohrev podložky...");
@@ -715,12 +712,6 @@ namespace Language_sk {
LSTR MSG_SERVICE_RESET = _UxGT("Vynulovať");
LSTR MSG_SERVICE_IN = _UxGT("za:");
LSTR MSG_BACKLASH = _UxGT("Kompenz. vôle");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korekcia");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Vyhladzovanie");

9
Marlin/src/lcd/language/language_sv.h
View File

@@ -37,7 +37,6 @@ namespace Language_sv {
LSTR LANGUAGE = _UxGT("Swedish");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Redo.");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("JA");
LSTR MSG_NO = _UxGT("NEJ");
LSTR MSG_BACK = _UxGT("Bakåt");
@@ -483,9 +482,7 @@ namespace Language_sv {
LSTR MSG_ERR_MINTEMP = _UxGT("Fel: MINTEMP");
LSTR MSG_HALTED = _UxGT("Utskrift stoppad");
LSTR MSG_PLEASE_RESET = _UxGT("Snälla Återställ");
LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only
LSTR MSG_SHORT_HOUR = _UxGT("t"); // One character only
LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
LSTR MSG_HEATING = _UxGT("Värmer...");
LSTR MSG_COOLING = _UxGT("Kyler...");
LSTR MSG_BED_HEATING = _UxGT("Bädd Värmer...");
@@ -665,12 +662,6 @@ namespace Language_sv {
LSTR MSG_SERVICE_RESET = _UxGT("Återställ");
LSTR MSG_SERVICE_IN = _UxGT(" in:");
LSTR MSG_BACKLASH = _UxGT("Backlash");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrigering");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Glättning");

7
Marlin/src/lcd/language/language_tr.h
View File

@@ -41,7 +41,6 @@ namespace Language_tr {
LSTR LANGUAGE = _UxGT("Turkish");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" hazır.");
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("EVET");
LSTR MSG_NO = _UxGT("HAYIR");
LSTR MSG_BACK = _UxGT("Geri");
@@ -583,12 +582,6 @@ namespace Language_tr {
LSTR MSG_SERVICE_RESET = _UxGT("Resetle");
LSTR MSG_SERVICE_IN = _UxGT(" içinde:");
LSTR MSG_BACKLASH = _UxGT("Ters Tepki");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Düzeltme");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Yumuşatma");
}

6
Marlin/src/lcd/language/language_zh_CN.h
View File

@@ -617,12 +617,6 @@ namespace Language_zh_CN {
LSTR MSG_SERVICE_RESET = _UxGT("复位");
LSTR MSG_SERVICE_IN = _UxGT(" 在:");
LSTR MSG_BACKLASH = _UxGT("回差");
LSTR MSG_BACKLASH_A = LCD_STR_A;
LSTR MSG_BACKLASH_B = LCD_STR_B;
LSTR MSG_BACKLASH_C = LCD_STR_C;
LSTR MSG_BACKLASH_I = LCD_STR_I;
LSTR MSG_BACKLASH_J = LCD_STR_J;
LSTR MSG_BACKLASH_K = LCD_STR_K;
LSTR MSG_BACKLASH_CORRECTION = _UxGT("校正");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("平滑的");

1
Marlin/src/lcd/language/language_zh_TW.h
View File

@@ -34,7 +34,6 @@ namespace Language_zh_TW {
LSTR LANGUAGE = _UxGT("Traditional Chinese");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT("已就緒."); // " ready."
LSTR MSG_MARLIN = _UxGT("Marlin");
LSTR MSG_YES = _UxGT("是"); // "YES"
LSTR MSG_NO = _UxGT("否"); // "NO"
LSTR MSG_BACK = _UxGT("返回"); // "Back"