bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)

Browse Source 
M355 case light improvements (replaces PR #5685)
This commit is contained in:
Bob-the-Kuhn 2017-05-31 13:33:59 -05:00 committed by GitHub
commit 65bd4c8c94
28 changed files with 473 additions and 201 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Marlin/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

80
Marlin/Marlin_main.cpp
View File

@ -176,7 +176,7 @@
* M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED) * M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED)
* M350 - Set microstepping mode. (Requires digital microstepping pins.) * M350 - Set microstepping mode. (Requires digital microstepping pins.)
* M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.) * M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.)
* M355 - Turn the Case Light on/off and set its brightness. (Requires CASE_LIGHT_PIN) * M355 - Set Case Light on/off and set brightness. (Requires CASE_LIGHT_PIN)
* M380 - Activate solenoid on active extruder. (Requires EXT_SOLENOID) * M380 - Activate solenoid on active extruder. (Requires EXT_SOLENOID)
* M381 - Disable all solenoids. (Requires EXT_SOLENOID) * M381 - Disable all solenoids. (Requires EXT_SOLENOID)
* M400 - Finish all moves. * M400 - Finish all moves.
@ -566,16 +566,6 @@ static uint8_t target_extruder;
; ;
#endif #endif
#if HAS_CASE_LIGHT
bool case_light_on =
#if ENABLED(CASE_LIGHT_DEFAULT_ON)
true
#else
false
#endif
;
#endif
#if ENABLED(DELTA) #if ENABLED(DELTA)
float delta[ABC], float delta[ABC],
@ -720,7 +710,8 @@ static void report_current_position();
SERIAL_ECHOPAIR(", ", z); SERIAL_ECHOPAIR(", ", z);
SERIAL_CHAR(')'); SERIAL_CHAR(')');
suffix ? serialprintPGM(suffix) : SERIAL_EOL; if (suffix) {serialprintPGM(suffix);} //won't compile for Teensy with the previous construction
else SERIAL_EOL;
} }
void print_xyz(const char* prefix, const char* suffix, const float xyz[]) { void print_xyz(const char* prefix, const char* suffix, const float xyz[]) {
@ -5263,7 +5254,7 @@ void home_all_axes() { gcode_G28(true); }
recalc_delta_settings(delta_radius, delta_diagonal_rod); recalc_delta_settings(delta_radius, delta_diagonal_rod);
} }
else if(zero_std_dev >= test_precision) { // step one back else if (zero_std_dev >= test_precision) { // step one back
COPY(endstop_adj, e_old); COPY(endstop_adj, e_old);
delta_radius = dr_old; delta_radius = dr_old;
home_offset[Z_AXIS] = zh_old; home_offset[Z_AXIS] = zh_old;
@ -7678,11 +7669,18 @@ inline void gcode_M115() {
SERIAL_PROTOCOLLNPGM("Cap:SOFTWARE_POWER:0"); SERIAL_PROTOCOLLNPGM("Cap:SOFTWARE_POWER:0");
#endif #endif
// TOGGLE_LIGHTS (M355) // CASE LIGHTS (M355)
#if HAS_CASE_LIGHT #if HAS_CASE_LIGHT
SERIAL_PROTOCOLLNPGM("Cap:TOGGLE_LIGHTS:1"); SERIAL_PROTOCOLLNPGM("Cap:TOGGLE_LIGHTS:1");
bool USEABLE_HARDWARE_PWM(uint8_t pin);
if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) {
SERIAL_PROTOCOLLNPGM("Cap:CASE_LIGHT_BRIGHTNESS:1");
}
else
SERIAL_PROTOCOLLNPGM("Cap:CASE_LIGHT_BRIGHTNESS:0");
#else #else
SERIAL_PROTOCOLLNPGM("Cap:TOGGLE_LIGHTS:0"); SERIAL_PROTOCOLLNPGM("Cap:TOGGLE_LIGHTS:0");
SERIAL_PROTOCOLLNPGM("Cap:CASE_LIGHT_BRIGHTNESS:0");
#endif #endif
// EMERGENCY_PARSER (M108, M112, M410) // EMERGENCY_PARSER (M108, M112, M410)
@ -9472,30 +9470,54 @@ inline void gcode_M907() {
#endif // HAS_MICROSTEPS #endif // HAS_MICROSTEPS
#if HAS_CASE_LIGHT #if HAS_CASE_LIGHT
#ifndef INVERT_CASE_LIGHT
uint8_t case_light_brightness = 255; #define INVERT_CASE_LIGHT false
#endif
int case_light_brightness; // LCD routine wants INT
bool case_light_on;
void update_case_light() { void update_case_light() {
WRITE(CASE_LIGHT_PIN, case_light_on != INVERT_CASE_LIGHT ? HIGH : LOW); pinMode(CASE_LIGHT_PIN, OUTPUT); // digitalWrite doesn't set the port mode
analogWrite(CASE_LIGHT_PIN, case_light_on != INVERT_CASE_LIGHT ? case_light_brightness : 0); uint8_t case_light_bright = (uint8_t)case_light_brightness;
if (case_light_on) {
if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) {
analogWrite(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? 255 - case_light_brightness : case_light_brightness );
}
else digitalWrite(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? LOW : HIGH );
}
else digitalWrite(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? HIGH : LOW);
} }
#endif // HAS_CASE_LIGHT #endif // HAS_CASE_LIGHT
/** /**
* M355: Turn case lights on/off and set brightness * M355: Turn case light on/off and set brightness
* *
* S<bool> Turn case light on or off * P<byte> Set case light brightness (PWM pin required - ignored otherwise)
* P<byte> Set case light brightness (PWM pin required) *
* S<bool> Set case light on/off
*
* When S turns on the light on a PWM pin then the current brightness level is used/restored
*
* M355 P200 S0 turns off the light & sets the brightness level
* M355 S1 turns on the light with a brightness of 200 (assuming a PWM pin)
*/ */
inline void gcode_M355() { inline void gcode_M355() {
#if HAS_CASE_LIGHT #if HAS_CASE_LIGHT
if (parser.seen('P')) case_light_brightness = parser.value_byte(); uint8_t args = 0;
if (parser.seen('S')) case_light_on = parser.value_bool(); if (parser.seen('P')) ++args, case_light_brightness = parser.value_byte();
update_case_light(); if (parser.seen('S')) ++args, case_light_on = parser.value_bool();
if (args) update_case_light();
// always report case light status
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM("Case lights "); if (!case_light_on) {
case_light_on ? SERIAL_ECHOLNPGM("on") : SERIAL_ECHOLNPGM("off"); SERIAL_ECHOLN("Case light: off");
}
else {
if (!USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) SERIAL_ECHOLN("Case light: on");
else SERIAL_ECHOLNPAIR("Case light: ", case_light_brightness);
}
#else #else
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_M355_NONE); SERIAL_ERRORLNPGM(MSG_ERR_M355_NONE);
@ -10710,7 +10732,7 @@ void process_next_command() {
#endif // HAS_MICROSTEPS #endif // HAS_MICROSTEPS
case 355: // M355 Turn case lights on/off case 355: // M355 set case light brightness
gcode_M355(); gcode_M355();
break; break;
@ -12459,6 +12481,8 @@ void setup() {
#endif #endif
#if HAS_CASE_LIGHT #if HAS_CASE_LIGHT
case_light_on = CASE_LIGHT_DEFAULT_ON;
case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS;
update_case_light(); update_case_light();
#endif #endif

20
Marlin/example_configurations/Cartesio/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@ -233,13 +233,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/K8400/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/RigidBot/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/TAZ4/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/TinyBoy2/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@ -225,13 +225,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

20
Marlin/example_configurations/wt150/Configuration_adv.h
View File

@ -220,13 +220,19 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off // M355 Case Light command
//#define CASE_LIGHT_PIN 4 // Set case light brightness/on/off
#if PIN_EXISTS(CASE_LIGHT)
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
#endif // pins_XXX.h file overrides this one
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif
//=========================================================================== //===========================================================================
//============================ Mechanical Settings ========================== //============================ Mechanical Settings ==========================

92
Marlin/fastio.h
View File

@ -26,10 +26,11 @@
* Contributed by Triffid_Hunter. Modified by Kliment and the Marlin team. * Contributed by Triffid_Hunter. Modified by Kliment and the Marlin team.
*/ */
#ifndef _FASTIO_ARDUINO_H #ifndef _FASTIO_ARDUINO_H
#define _FASTIO_ARDUINO_H #define _FASTIO_ARDUINO_H
#include <avr/io.h> #include <avr/io.h>
#include "macros.h"
/** /**
* Enable this option to use Teensy++ 2.0 assignments for AT90USB processors. * Enable this option to use Teensy++ 2.0 assignments for AT90USB processors.
@ -238,4 +239,93 @@ typedef enum {
#define SET_FOCB(T,V) SET_FOC(T,B,V) #define SET_FOCB(T,V) SET_FOC(T,B,V)
#define SET_FOCC(T,V) SET_FOC(T,C,V) #define SET_FOCC(T,V) SET_FOC(T,C,V)
/**
* PWM availability macros
*/
#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328p__))
//find out which harware PWMs are already in use
#if PIN_EXISTS(CONTROLLER_FAN)
#define PWM_CHK_FAN_B(p) (p == CONTROLLER_FAN_PIN || p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN)
#else
#define PWM_CHK_FAN_B(p) (p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN)
#endif
#if PIN_EXISTS(FAN) || PIN_EXISTS(FAN1) || PIN_EXISTS(FAN2)
#if PIN_EXISTS(FAN2)
#define PWM_CHK_FAN_A(p) (p == FAN_PIN || p == FAN1_PIN || p == FAN2_PIN)
#elif PIN_EXISTS(FAN1)
#define PWM_CHK_FAN_A(p) (p == FAN_PIN || p == FAN1_PIN)
#else
#define PWM_CHK_FAN_A(p) p == FAN_PIN
#endif
#else
#define PWM_CHK_FAN_A(p) false
#endif
#if HAS_MOTOR_CURRENT_PWM
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
#define PWM_CHK_MOTOR_CURRENT(p) (p == MOTOR_CURRENT_PWM_E || p == MOTOR_CURRENT_PWM_Z || p == MOTOR_CURRENT_PWM_XY)
#elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
#define PWM_CHK_MOTOR_CURRENT(p) (p == MOTOR_CURRENT_PWM_E || p == MOTOR_CURRENT_PWM_Z)
#else
#define PWM_CHK_MOTOR_CURRENT(p) (p == MOTOR_CURRENT_PWM_E)
#endif
#else
#define PWM_CHK_MOTOR_CURRENT(p) false
#endif
#if defined(NUM_SERVOS)
#if AVR_ATmega2560_FAMILY
#define PWM_CHK_SERVO(p) ( p == 5 || NUM_SERVOS > 12 && p == 6 || NUM_SERVOS > 24 && p == 46) //PWMS 3A, 4A & 5A
#elif AVR_ATmega2561_FAMILY
#define PWM_CHK_SERVO(p) p == 5 //PWM3A
#elif AVR_ATmega1284_FAMILY
#define PWM_CHK_SERVO(p) false
#elif AVR_AT90USB1286_FAMILY
#define PWM_CHK_SERVO(p) p == 16 //PWM3A
#elif AVR_ATmega328_FAMILY
#define PWM_CHK_SERVO(p) false
#endif
#else
#define PWM_CHK_SERVO(p) false
#endif
#if ENABLED(BARICUDA)
#if HAS_HEATER_1 && HAS_HEATER_2
#define PWM_CHK_HEATER(p) (p == HEATER_1_PIN || p == HEATER_2_PIN)
#elif HAS_HEATER_1
#define PWM_CHK_HEATER(p) (p == HEATER_1_PIN)
#endif
#else
#define PWM_CHK_HEATER(p) false
#endif
#define PWM_CHK(p) (PWM_CHK_HEATER(p) || PWM_CHK_SERVO(p) || PWM_CHK_MOTOR_CURRENT(p)\
|| PWM_CHK_FAN_A(p) || PWM_CHK_FAN_B(p))
// define which hardware PWMs are available for the current CPU
// all timer 1 PWMS deleted from this list because they are never available
#if AVR_ATmega2560_FAMILY
#define PWM_PINS(p) ((p >= 2 && p <= 10 ) || p == 13 || p == 44 || p == 45 || p == 46 )
#elif AVR_ATmega2561_FAMILY
#define PWM_PINS(p) ((p >= 2 && p <= 6 ) || p == 9)
#elif AVR_ATmega1284_FAMILY
#define PWM_PINS(p) (p == 3 || p == 4 || p == 14 || p == 15)
#elif AVR_AT90USB1286_FAMILY
#define PWM_PINS(p) (p == 0 || p == 1 || p == 14 || p == 15 || p == 16 || p == 24)
#elif AVR_ATmega328_FAMILY
#define PWM_PINS(p) (p == 3 || p == 5 || p == 6 || p == 11)
#else
#error "unknown CPU"
#endif
// finally - the macro that tells us if a pin is an available hardware PWM
#define USEABLE_HARDWARE_PWM(p) (PWM_PINS(p) && !PWM_CHK(p))
#endif // _FASTIO_ARDUINO_H #endif // _FASTIO_ARDUINO_H

4
Marlin/language_en.h
View File

@ -706,7 +706,9 @@
#ifndef MSG_CASE_LIGHT #ifndef MSG_CASE_LIGHT
#define MSG_CASE_LIGHT _UxGT("Case light") #define MSG_CASE_LIGHT _UxGT("Case light")
#endif #endif
#ifndef MSG_CASE_LIGHT_BRIGHTNESS
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light BRIGHTNESS")
#endif
#if LCD_WIDTH >= 20 #if LCD_WIDTH >= 20
#ifndef MSG_INFO_PRINT_COUNT #ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count") #define MSG_INFO_PRINT_COUNT _UxGT("Print Count")

36
Marlin/ultralcd.cpp
View File

@ -60,6 +60,7 @@ int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2
uint8_t lcd_status_message_level; uint8_t lcd_status_message_level;
char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kana with up to 3*LCD_WIDTH+1 char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kana with up to 3*LCD_WIDTH+1
#if ENABLED(STATUS_MESSAGE_SCROLLING) #if ENABLED(STATUS_MESSAGE_SCROLLING)
uint8_t status_scroll_pos = 0; uint8_t status_scroll_pos = 0;
#endif #endif
@ -726,6 +727,24 @@ void kill_screen(const char* lcd_msg) {
#endif // SDSUPPORT #endif // SDSUPPORT
#if ENABLED(MENU_ITEM_CASE_LIGHT)
extern int case_light_brightness;
extern bool case_light_on;
extern void update_case_light();
void case_light_menu() {
START_MENU();
//
// ^ Main
//
MENU_BACK(MSG_MAIN);
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true);
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
END_MENU();
}
#endif // MENU_ITEM_CASE_LIGHT
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
/** /**
@ -847,11 +866,6 @@ void kill_screen(const char* lcd_msg) {
* *
*/ */
#if ENABLED(MENU_ITEM_CASE_LIGHT)
extern bool case_light_on;
extern void update_case_light();
#endif
void lcd_main_menu() { void lcd_main_menu() {
START_MENU(); START_MENU();
MENU_BACK(MSG_WATCH); MENU_BACK(MSG_WATCH);
@ -868,10 +882,14 @@ void kill_screen(const char* lcd_msg) {
#endif #endif
// //
// Switch case light on/off // Set Case light on/off/brightness
// //
#if ENABLED(MENU_ITEM_CASE_LIGHT) #if ENABLED(MENU_ITEM_CASE_LIGHT)
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, &case_light_on, update_case_light); if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) {
MENU_ITEM(submenu, MSG_CASE_LIGHT, case_light_menu);
}
else
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
#endif #endif
if (planner.movesplanned() || IS_SD_PRINTING) { if (planner.movesplanned() || IS_SD_PRINTING) {
@ -1847,7 +1865,7 @@ void kill_screen(const char* lcd_msg) {
*/ */
void _lcd_ubl_validate_custom_mesh() { void _lcd_ubl_validate_custom_mesh() {
char UBL_LCD_GCODE[24]; char UBL_LCD_GCODE[24];
const int temp = const int temp =
#if WATCH_THE_BED #if WATCH_THE_BED
custom_bed_temp custom_bed_temp
#else #else
@ -2598,7 +2616,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu); MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true); MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, (int) &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
#endif #endif
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);

2
Marlin/ultralcd.h
View File

@ -59,7 +59,7 @@
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
extern uint16_t lcd_contrast; extern uint16_t lcd_contrast;
void set_lcd_contrast(uint16_t value); void set_lcd_contrast(const uint16_t value);
#elif ENABLED(SHOW_BOOTSCREEN) #elif ENABLED(SHOW_BOOTSCREEN)
void bootscreen(); void bootscreen();
#endif #endif