Add MKS UI (TFT_LITTLE_VGL_UI) (#18071)

Marlin/Configuration.h

@@ -2116,10 +2116,20 @@
 //
 //#define FSMC_GRAPHICAL_TFT
 
+//
+// TFT Little VGL UI
+//
+//#define TFT_LITTLE_VGL_UI
+
 //=============================================================================
 //============================  Other Controllers  ============================
 //=============================================================================
 
+//
+// Robin nano v2.0 SPI touch screen
+//
+//#define SPI_GRAPHICAL_TFT
+
 //
 // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
 //

Marlin/src/MarlinCore.cpp

@@ -59,6 +59,12 @@
 #include "gcode/parser.h"
 #include "gcode/queue.h"
 
+#if ENABLED(TFT_LITTLE_VGL_UI)
+  #include "lvgl.h"
+  #include "lcd/extui/lib/mks_ui/inc/tft_lvgl_configuration.h"
+  #include "lcd/extui/lib/mks_ui/inc/draw_ui.h"
+#endif
+
 #if ENABLED(DIRECT_STEPPING)
   #include "feature/direct_stepping.h"
 #endif
@@ -726,6 +732,10 @@ void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
 
   // Direct Stepping
   TERN_(DIRECT_STEPPING, page_manager.write_responses());
+
+  #if ENABLED(TFT_LITTLE_VGL_UI)
+    LV_TASK_HANDLER();
+  #endif
 }
 
 /**
@@ -1141,6 +1151,10 @@ void setup() {
     SETUP_RUN(page_manager.init());
   #endif
 
+  #if ENABLED(TFT_LITTLE_VGL_UI)
+    SETUP_RUN(tft_lvgl_init());
+  #endif
+
   marlin_state = MF_RUNNING;
 
   SETUP_LOG("setup() completed.");
@@ -1173,5 +1187,7 @@ void loop() {
 
     endstops.event_handler();
 
+    TERN_(TFT_LITTLE_VGL_UI, printer_state_polling());
+
   } while (ENABLED(__AVR__)); // Loop forever on slower (AVR) boards
 }

Marlin/src/inc/Conditionals_LCD.h

@@ -241,6 +241,8 @@
   #define DOGLCD
   #define IS_ULTIPANEL
   #define DELAYED_BACKLIGHT_INIT
+#elif ENABLED(SPI_GRAPHICAL_TFT)
+  #define DELAYED_BACKLIGHT_INIT
 #endif
 
 /**

Marlin/src/lcd/extui/lib/mks_ui/SPI_TFT.cpp

@@ -0,0 +1,271 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(SPI_GRAPHICAL_TFT)
+
+  #include <SPI.h>
+  #include "../../../../inc/MarlinConfig.h"
+  #include "SPI_TFT.h"
+
+  TFT SPI_TFT;
+
+  #ifndef SPI_TFT_MISO_PIN
+    #define SPI_TFT_MISO_PIN PA6
+  #endif
+  #ifndef SPI_TFT_MOSI_PIN
+    #define SPI_TFT_MOSI_PIN PA7
+  #endif
+  #ifndef SPI_TFT_SCK_PIN
+    #define SPI_TFT_SCK_PIN  PA5
+  #endif
+  #ifndef SPI_TFT_CS_PIN
+    #define SPI_TFT_CS_PIN   PD11
+  #endif
+  #ifndef SPI_TFT_DC_PIN
+    #define SPI_TFT_DC_PIN   PD10
+  #endif
+  #ifndef SPI_TFT_RST_PIN
+    #define SPI_TFT_RST_PIN   PC6
+  #endif
+
+// use SPI1 for the spi tft.
+  void TFT::spi_init(uint8_t spiRate) {
+
+    SPI_TFT_CS_H;
+
+    /**
+     * STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
+     * STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
+     * so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
+     */
+    uint8_t clock;
+    switch (spiRate) {
+      case SPI_FULL_SPEED:    clock = SPI_CLOCK_DIV4;  break;
+      case SPI_HALF_SPEED:    clock = SPI_CLOCK_DIV4; break;
+      case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8; break;
+      case SPI_EIGHTH_SPEED:  clock = SPI_CLOCK_DIV16; break;
+      case SPI_SPEED_5:       clock = SPI_CLOCK_DIV32; break;
+      case SPI_SPEED_6:       clock = SPI_CLOCK_DIV64; break;
+      default:                clock = SPI_CLOCK_DIV2;        // Default from the SPI library
+    }
+    SPI.setModule(1);
+    SPI.begin();
+    SPI.setClockDivider(clock);
+    SPI.setBitOrder(MSBFIRST);
+    SPI.setDataMode(SPI_MODE0);
+  }
+
+  uint8_t TFT::spi_Rec() {
+    uint8_t returnByte = SPI.transfer(ff);
+    return returnByte;
+  }
+
+  uint8_t TFT::spi_read_write_byte(uint8_t data) {
+    uint8_t returnByte = SPI.transfer(data);
+    return returnByte;
+  }
+
+/**
+ * @brief  Receive a number of bytes from the SPI port to a buffer
+ *
+ * @param  buf   Pointer to starting address of buffer to write to.
+ * @param  nbyte Number of bytes to receive.
+ * @return Nothing
+ *
+ * @details Uses DMA
+ */
+  void TFT::spi_Read(uint8_t* buf, uint16_t nbyte) {SPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte);}
+
+/**
+ * @brief  Send a single byte on SPI port
+ *
+ * @param  b Byte to send
+ *
+ * @details
+ */
+  void TFT::spi_Send(uint8_t b) {SPI.send(b);}
+
+/**
+ * @brief  Write token and then write from 512 byte buffer to SPI (for SD card)
+ *
+ * @param  buf   Pointer with buffer start address
+ * @return Nothing
+ *
+ * @details Use DMA
+ */
+  void TFT::spi_SendBlock(uint8_t token, const uint8_t* buf) {
+    SPI.send(token);
+    SPI.dmaSend(const_cast<uint8_t*>(buf), 512);
+  }
+
+  void TFT::LCD_WR_REG(uint8_t cmd) {
+    SPI_TFT_CS_L;
+    SPI_TFT_DC_L;
+    spi_Send(cmd);
+    SPI_TFT_CS_H;
+  }
+  void TFT::LCD_WR_DATA(uint8_t data) {
+    SPI_TFT_CS_L;
+    SPI_TFT_DC_H;
+    spi_Send(data);
+    SPI_TFT_CS_H;
+  }
+  void TFT::LCD_WriteRAM_Prepare() {LCD_WR_REG(0X2C);}
+  void TFT::SetCursor(uint16_t x, uint16_t y) {
+    LCD_WR_REG(0x2a);
+    LCD_WR_DATA(x >> 8);
+    LCD_WR_DATA(x);
+    LCD_WR_DATA(x >> 8);
+    LCD_WR_DATA(x);
+
+    LCD_WR_REG(0x2b);
+    LCD_WR_DATA(y >> 8);
+    LCD_WR_DATA(y);
+    LCD_WR_DATA(y >> 8);
+    LCD_WR_DATA(y);
+  }
+  void TFT::SetWindows(uint16_t x, uint16_t y, uint16_t with, uint16_t height) {
+    LCD_WR_REG(0x2a);
+    LCD_WR_DATA(x >> 8);
+    LCD_WR_DATA(x);
+    LCD_WR_DATA((x + with) >> 8);
+    LCD_WR_DATA((x + with));
+
+    LCD_WR_REG(0x2b);
+    LCD_WR_DATA(y >> 8);
+    LCD_WR_DATA(y);
+    LCD_WR_DATA((y + height) >> 8);
+    LCD_WR_DATA(y + height);
+  }
+  void TFT::LCD_init() {
+    SPI_TFT_RST_H;
+    delay(150);
+    SPI_TFT_RST_L;
+    delay(150);
+    SPI_TFT_RST_H;
+
+    delay(120);
+    LCD_WR_REG(0x11);
+    delay(120);
+
+    LCD_WR_REG(0xf0);
+    LCD_WR_DATA(0xc3);
+    LCD_WR_REG(0xf0);
+    LCD_WR_DATA(0x96);
+
+    LCD_WR_REG(0x36);
+    LCD_WR_DATA(0x28);
+
+    LCD_WR_REG(0x3A);
+    LCD_WR_DATA(0x55);
+
+    LCD_WR_REG(0xB4);
+    LCD_WR_DATA(0x01);
+    LCD_WR_REG(0xB7);
+    LCD_WR_DATA(0xC6);
+    LCD_WR_REG(0xe8);
+    LCD_WR_DATA(0x40);
+    LCD_WR_DATA(0x8a);
+    LCD_WR_DATA(0x00);
+    LCD_WR_DATA(0x00);
+    LCD_WR_DATA(0x29);
+    LCD_WR_DATA(0x19);
+    LCD_WR_DATA(0xa5);
+    LCD_WR_DATA(0x33);
+    LCD_WR_REG(0xc1);
+    LCD_WR_DATA(0x06);
+    LCD_WR_REG(0xc2);
+    LCD_WR_DATA(0xa7);
+    LCD_WR_REG(0xc5);
+    LCD_WR_DATA(0x18);
+    LCD_WR_REG(0xe0);     // Positive Voltage Gamma Control
+    LCD_WR_DATA(0xf0);
+    LCD_WR_DATA(0x09);
+    LCD_WR_DATA(0x0b);
+    LCD_WR_DATA(0x06);
+    LCD_WR_DATA(0x04);
+    LCD_WR_DATA(0x15);
+    LCD_WR_DATA(0x2f);
+    LCD_WR_DATA(0x54);
+    LCD_WR_DATA(0x42);
+    LCD_WR_DATA(0x3c);
+    LCD_WR_DATA(0x17);
+    LCD_WR_DATA(0x14);
+    LCD_WR_DATA(0x18);
+    LCD_WR_DATA(0x1b);
+    LCD_WR_REG(0xe1);     // Negative Voltage Gamma Control
+    LCD_WR_DATA(0xf0);
+    LCD_WR_DATA(0x09);
+    LCD_WR_DATA(0x0b);
+    LCD_WR_DATA(0x06);
+    LCD_WR_DATA(0x04);
+    LCD_WR_DATA(0x03);
+    LCD_WR_DATA(0x2d);
+    LCD_WR_DATA(0x43);
+    LCD_WR_DATA(0x42);
+    LCD_WR_DATA(0x3b);
+    LCD_WR_DATA(0x16);
+    LCD_WR_DATA(0x14);
+    LCD_WR_DATA(0x17);
+    LCD_WR_DATA(0x1b);
+    LCD_WR_REG(0xf0);
+    LCD_WR_DATA(0x3c);
+    LCD_WR_REG(0xf0);
+    LCD_WR_DATA(0x69);
+    delay(120);     // Delay 120ms
+    LCD_WR_REG(0x29);     // Display ON
+
+    LCD_clear(0x0000);    //
+    SPI_TFT_BLK_H;
+
+  }
+  void TFT::LCD_clear(uint16_t color) {
+    unsigned int i, m;
+    uint32_t count;
+    uint8_t tbuf[960];
+
+    SetCursor(0, 0);
+    SetWindows(0, 0, 480 - 1, 320 - 1);
+    LCD_WriteRAM_Prepare();
+    SPI_TFT_CS_L;
+    SPI_TFT_DC_H;
+    for (i = 0; i < 960;) {
+      tbuf[i]     = color >> 8;
+      tbuf[i + 1] = color;
+      i += 2;
+    }
+    for (i = 0; i < 320; i++) {
+      // for(m=0;m<480;m++)
+      // {
+      // LCD_WR_DATA(color>>8);
+      // LCD_WR_DATA(color);
+
+      SPI.dmaSend(tbuf, 960, true);
+      // SPI_TFT_CS_H;
+      // }
+    }
+    SPI_TFT_CS_H;
+  }
+
+#endif // SPI_GRAPHICAL_TFT

Marlin/src/lcd/extui/lib/mks_ui/SPI_TFT.h

@@ -0,0 +1,55 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <stdint.h>
+
+#define SPI_TFT_CS_H  OUT_WRITE(SPI_TFT_CS_PIN, HIGH)
+#define SPI_TFT_CS_L  OUT_WRITE(SPI_TFT_CS_PIN, LOW)
+
+#define SPI_TFT_DC_H  OUT_WRITE(SPI_TFT_DC_PIN, HIGH)
+#define SPI_TFT_DC_L  OUT_WRITE(SPI_TFT_DC_PIN, LOW)
+
+#define SPI_TFT_RST_H OUT_WRITE(SPI_TFT_RST_PIN, HIGH)
+#define SPI_TFT_RST_L OUT_WRITE(SPI_TFT_RST_PIN, LOW)
+
+#define SPI_TFT_BLK_H OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH)
+#define SPI_TFT_BLK_L OUT_WRITE(LCD_BACKLIGHT_PIN, LOW)
+
+class TFT {
+public:
+  void spi_init(uint8_t spiRate);
+  uint8_t spi_Rec();
+  uint8_t spi_read_write_byte(uint8_t data);
+  void spi_Read(uint8_t* buf, uint16_t nbyte);
+  void spi_Send(uint8_t b);
+  void spi_SendBlock(uint8_t token, const uint8_t* buf);
+  void LCD_WR_REG(uint8_t cmd);
+  void LCD_WR_DATA(uint8_t data);
+  void SetCursor(uint16_t x, uint16_t y);
+  void SetWindows(uint16_t x, uint16_t y, uint16_t with, uint16_t height);
+  void LCD_init();
+  void LCD_clear(uint16_t color);
+  void LCD_WriteRAM_Prepare();
+};
+
+extern TFT SPI_TFT;

Marlin/src/lcd/extui/lib/mks_ui/W25Qxx.cpp

@@ -0,0 +1,395 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if 1 // ENABLED(SPI_FLASH)
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include <SPI.h>
+#include "../../../../inc/MarlinConfig.h"
+
+#include "W25Qxx.h"
+
+#ifndef SPI_FLASH_MISO_PIN
+  #define SPI_FLASH_MISO_PIN W25QXX_MISO_PIN
+#endif
+#ifndef SPI_FLASH_MOSI_PIN
+  #define SPI_FLASH_MOSI_PIN W25QXX_MOSI_PIN
+#endif
+#ifndef SPI_FLASH_SCK_PIN
+  #define SPI_FLASH_SCK_PIN  W25QXX_SCK_PIN
+#endif
+#ifndef SPI_FLASH_CS_PIN
+  #define SPI_FLASH_CS_PIN   W25QXX_CS_PIN
+#endif
+
+#define W25QXX_CS_H OUT_WRITE(SPI_FLASH_CS_PIN, HIGH)
+#define W25QXX_CS_L OUT_WRITE(SPI_FLASH_CS_PIN, LOW)
+
+ext_FLASH W25QXX;
+
+void ext_FLASH::init(uint8_t spiRate) {
+
+  OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
+
+  /**
+   * STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
+   * STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
+   * so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
+   */
+  #if SPI_DEVICE == 1
+    #define SPI_CLOCK_MAX SPI_CLOCK_DIV4
+  #else
+    #define SPI_CLOCK_MAX SPI_CLOCK_DIV2
+  #endif
+  uint8_t clock;
+  switch (spiRate) {
+    case SPI_FULL_SPEED:    clock = SPI_CLOCK_MAX;  break;
+    case SPI_HALF_SPEED:    clock = SPI_CLOCK_DIV4; break;
+    case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8; break;
+    case SPI_EIGHTH_SPEED:  clock = SPI_CLOCK_DIV16; break;
+    case SPI_SPEED_5:       clock = SPI_CLOCK_DIV32; break;
+    case SPI_SPEED_6:       clock = SPI_CLOCK_DIV64; break;
+    default:                clock = SPI_CLOCK_DIV2;// Default from the SPI library
+  }
+  SPI.setModule(SPI_DEVICE);
+  SPI.begin();
+  SPI.setClockDivider(clock);
+  SPI.setBitOrder(MSBFIRST);
+  SPI.setDataMode(SPI_MODE0);
+}
+
+/**
+ * @brief  Receive a single byte from the SPI port.
+ *
+ * @return Byte received
+ *
+ * @details
+ */
+uint8_t ext_FLASH::spi_flash_Rec() {
+  uint8_t returnByte = SPI.transfer(ff);
+  return returnByte;
+}
+
+uint8_t ext_FLASH::spi_flash_read_write_byte(uint8_t data) {
+  uint8_t returnByte = SPI.transfer(data);
+  return returnByte;
+}
+
+/**
+ * @brief  Receive a number of bytes from the SPI port to a buffer
+ *
+ * @param  buf   Pointer to starting address of buffer to write to.
+ * @param  nbyte Number of bytes to receive.
+ * @return Nothing
+ *
+ * @details Uses DMA
+ */
+void ext_FLASH::spi_flash_Read(uint8_t* buf, uint16_t nbyte) { SPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte); }
+
+/**
+ * @brief  Send a single byte on SPI port
+ *
+ * @param  b Byte to send
+ *
+ * @details
+ */
+void ext_FLASH::spi_flash_Send(uint8_t b) { SPI.send(b); }
+
+/**
+ * @brief  Write token and then write from 512 byte buffer to SPI (for SD card)
+ *
+ * @param  buf   Pointer with buffer start address
+ * @return Nothing
+ *
+ * @details Use DMA
+ */
+void ext_FLASH::spi_flash_SendBlock(uint8_t token, const uint8_t* buf) {
+  SPI.send(token);
+  SPI.dmaSend(const_cast<uint8_t*>(buf), 512);
+}
+
+uint16_t ext_FLASH::W25QXX_ReadID(void) {
+  uint16_t Temp = 0;
+  W25QXX_CS_L;
+  spi_flash_Send(0x90);//<2F><><EFBFBD>Ͷ<EFBFBD>ȡID<49><44><EFBFBD><EFBFBD>
+  spi_flash_Send(0x00);
+  spi_flash_Send(0x00);
+  spi_flash_Send(0x00);
+  Temp |= spi_flash_Rec() << 8;
+  Temp |= spi_flash_Rec();
+  W25QXX_CS_H;
+  return Temp;
+}
+
+void ext_FLASH::SPI_FLASH_WriteEnable(void) {
+  /* Select the FLASH: Chip Select low */
+  W25QXX_CS_L;
+  /* Send "Write Enable" instruction */
+  spi_flash_Send(W25X_WriteEnable);
+  /* Deselect the FLASH: Chip Select high */
+  W25QXX_CS_H;
+}
+
+/*******************************************************************************
+* Function Name  : SPI_FLASH_WaitForWriteEnd
+* Description    : Polls the status of the Write In Progress (WIP) flag in the
+*                  FLASH's status  register  and  loop  until write  opertaion
+*                  has completed.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ext_FLASH::SPI_FLASH_WaitForWriteEnd(void) {
+  uint8_t FLASH_Status = 0;
+
+  /* Select the FLASH: Chip Select low */
+  W25QXX_CS_L;
+  /* Send "Read Status Register" instruction */
+  spi_flash_Send(W25X_ReadStatusReg);
+
+  /* Loop as long as the memory is busy with a write cycle */
+  do
+    /* Send a dummy byte to generate the clock needed by the FLASH
+    and put the value of the status register in FLASH_Status variable */
+    FLASH_Status = spi_flash_Rec();
+  while ((FLASH_Status & WIP_Flag) == 0x01); /* Write in progress */
+
+  /* Deselect the FLASH: Chip Select high */
+  W25QXX_CS_H;
+}
+
+void ext_FLASH::SPI_FLASH_SectorErase(uint32_t SectorAddr) {
+  /* Send write enable instruction */
+  SPI_FLASH_WriteEnable();
+
+  /* Sector Erase */
+  /* Select the FLASH: Chip Select low */
+  W25QXX_CS_L;
+  /* Send Sector Erase instruction */
+  spi_flash_Send(W25X_SectorErase);
+  /* Send SectorAddr high nibble address byte */
+  spi_flash_Send((SectorAddr & 0xFF0000) >> 16);
+  /* Send SectorAddr medium nibble address byte */
+  spi_flash_Send((SectorAddr & 0xFF00) >> 8);
+  /* Send SectorAddr low nibble address byte */
+  spi_flash_Send(SectorAddr & 0xFF);
+  /* Deselect the FLASH: Chip Select high */
+
+  W25QXX_CS_H;
+  /* Wait the end of Flash writing */
+  SPI_FLASH_WaitForWriteEnd();
+}
+
+void ext_FLASH::SPI_FLASH_BlockErase(uint32_t BlockAddr) {
+  SPI_FLASH_WriteEnable();
+  W25QXX_CS_L;
+  /* Send Sector Erase instruction */
+  spi_flash_Send(W25X_BlockErase);
+  /* Send SectorAddr high nibble address byte */
+  spi_flash_Send((BlockAddr & 0xFF0000) >> 16);
+  /* Send SectorAddr medium nibble address byte */
+  spi_flash_Send((BlockAddr & 0xFF00) >> 8);
+  /* Send SectorAddr low nibble address byte */
+  spi_flash_Send(BlockAddr & 0xFF);
+
+  W25QXX_CS_H;
+
+  SPI_FLASH_WaitForWriteEnd();
+}
+
+/*******************************************************************************
+* Function Name  : SPI_FLASH_BulkErase
+* Description    : Erases the entire FLASH.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ext_FLASH::SPI_FLASH_BulkErase(void) {
+  /* Send write enable instruction */
+  SPI_FLASH_WriteEnable();
+
+  /* Bulk Erase */
+  /* Select the FLASH: Chip Select low */
+  W25QXX_CS_L;
+
+  /* Send Bulk Erase instruction  */
+  spi_flash_Send(W25X_ChipErase);
+  /* Deselect the FLASH: Chip Select high */
+  W25QXX_CS_H;
+  /* Wait the end of Flash writing */
+  SPI_FLASH_WaitForWriteEnd();
+}
+
+/*******************************************************************************
+* Function Name  : SPI_FLASH_PageWrite
+* Description    : Writes more than one byte to the FLASH with a single WRITE
+*                  cycle(Page WRITE sequence). The number of byte can't exceed
+*                  the FLASH page size.
+* Input          : - pBuffer : pointer to the buffer  containing the data to be
+*                    written to the FLASH.
+*                  - WriteAddr : FLASH's internal address to write to.
+*                  - NumByteToWrite : number of bytes to write to the FLASH,
+*                    must be equal or less than "SPI_FLASH_PageSize" value.
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ext_FLASH::SPI_FLASH_PageWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite) {
+  /* Enable the write access to the FLASH */
+  SPI_FLASH_WriteEnable();
+
+  /* Select the FLASH: Chip Select low */
+  W25QXX_CS_L;
+  /* Send "Write to Memory " instruction */
+  spi_flash_Send(W25X_PageProgram);
+  /* Send WriteAddr high nibble address byte to write to */
+  spi_flash_Send((WriteAddr & 0xFF0000) >> 16);
+  /* Send WriteAddr medium nibble address byte to write to */
+  spi_flash_Send((WriteAddr & 0xFF00) >> 8);
+  /* Send WriteAddr low nibble address byte to write to */
+  spi_flash_Send(WriteAddr & 0xFF);
+
+  NOMORE(NumByteToWrite, SPI_FLASH_PerWritePageSize);
+
+  /* while there is data to be written on the FLASH */
+  while (NumByteToWrite--) {
+    /* Send the current byte */
+    spi_flash_Send(*pBuffer);
+    /* Point on the next byte to be written */
+    pBuffer++;
+  }
+
+  /* Deselect the FLASH: Chip Select high */
+  W25QXX_CS_H;
+
+  /* Wait the end of Flash writing */
+  SPI_FLASH_WaitForWriteEnd();
+}
+
+/*******************************************************************************
+* Function Name  : SPI_FLASH_BufferWrite
+* Description    : Writes block of data to the FLASH. In this function, the
+*                  number of WRITE cycles are reduced, using Page WRITE sequence.
+* Input          : - pBuffer : pointer to the buffer  containing the data to be
+*                    written to the FLASH.
+*                  - WriteAddr : FLASH's internal address to write to.
+*                  - NumByteToWrite : number of bytes to write to the FLASH.
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ext_FLASH::SPI_FLASH_BufferWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite) {
+  uint8_t NumOfPage = 0, NumOfSingle = 0, Addr = 0, count = 0, temp = 0;
+
+  Addr = WriteAddr % SPI_FLASH_PageSize;
+  count = SPI_FLASH_PageSize - Addr;
+  NumOfPage = NumByteToWrite / SPI_FLASH_PageSize;
+  NumOfSingle = NumByteToWrite % SPI_FLASH_PageSize;
+
+  if (Addr == 0) { /* WriteAddr is SPI_FLASH_PageSize aligned  */
+    if (NumOfPage == 0) { /* NumByteToWrite < SPI_FLASH_PageSize */
+      SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumByteToWrite);
+    }
+    else { /* NumByteToWrite > SPI_FLASH_PageSize */
+      while (NumOfPage--) {
+        SPI_FLASH_PageWrite(pBuffer, WriteAddr, SPI_FLASH_PageSize);
+        WriteAddr += SPI_FLASH_PageSize;
+        pBuffer += SPI_FLASH_PageSize;
+      }
+      SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumOfSingle);
+    }
+  }
+  else { /* WriteAddr is not SPI_FLASH_PageSize aligned  */
+    if (NumOfPage == 0) { /* NumByteToWrite < SPI_FLASH_PageSize */
+      if (NumOfSingle > count) { /* (NumByteToWrite + WriteAddr) > SPI_FLASH_PageSize */
+        temp = NumOfSingle - count;
+        SPI_FLASH_PageWrite(pBuffer, WriteAddr, count);
+        WriteAddr += count;
+        pBuffer += count;
+        SPI_FLASH_PageWrite(pBuffer, WriteAddr, temp);
+      }
+      else {
+        SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumByteToWrite);
+      }
+    }
+    else { /* NumByteToWrite > SPI_FLASH_PageSize */
+      NumByteToWrite -= count;
+      NumOfPage = NumByteToWrite / SPI_FLASH_PageSize;
+      NumOfSingle = NumByteToWrite % SPI_FLASH_PageSize;
+
+      SPI_FLASH_PageWrite(pBuffer, WriteAddr, count);
+      WriteAddr += count;
+      pBuffer += count;
+
+      while (NumOfPage--) {
+        SPI_FLASH_PageWrite(pBuffer, WriteAddr, SPI_FLASH_PageSize);
+        WriteAddr += SPI_FLASH_PageSize;
+        pBuffer += SPI_FLASH_PageSize;
+      }
+
+      if (NumOfSingle != 0)
+        SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumOfSingle);
+    }
+  }
+}
+
+/*******************************************************************************
+* Function Name  : SPI_FLASH_BufferRead
+* Description    : Reads a block of data from the FLASH.
+* Input          : - pBuffer : pointer to the buffer that receives the data read
+*                    from the FLASH.
+*                  - ReadAddr : FLASH's internal address to read from.
+*                  - NumByteToRead : number of bytes to read from the FLASH.
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ext_FLASH::SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead) {
+  /* Select the FLASH: Chip Select low */
+  W25QXX_CS_L;
+
+  /* Send "Read from Memory " instruction */
+  spi_flash_Send(W25X_ReadData);
+
+  /* Send ReadAddr high nibble address byte to read from */
+  spi_flash_Send((ReadAddr & 0xFF0000) >> 16);
+  /* Send ReadAddr medium nibble address byte to read from */
+  spi_flash_Send((ReadAddr & 0xFF00) >> 8);
+  /* Send ReadAddr low nibble address byte to read from */
+  spi_flash_Send(ReadAddr & 0xFF);
+
+  if (NumByteToRead < 33) {
+    while (NumByteToRead--) { /* while there is data to be read */
+      /* Read a byte from the FLASH */
+      *pBuffer = spi_flash_Rec();
+      /* Point to the next location where the byte read will be saved */
+      pBuffer++;
+    }
+  }
+  else {
+    spi_flash_Read(pBuffer, NumByteToRead);
+  }
+  W25QXX_CS_H;
+}
+
+void ext_FLASH::lv_pic_read(uint8_t *P_Rbuff, uint32_t addr, uint32_t size) {SPI_FLASH_BufferRead((uint8_t *)P_Rbuff, addr, size);}
+
+#endif // TFT_LITTLE_VGL_UI
+#endif // 1 ... SPI_FLASH

Marlin/src/lcd/extui/lib/mks_ui/W25Qxx.h

@@ -0,0 +1,127 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//#ifdef __cplusplus
+//extern "C" { /* C-declarations for C++ */
+//#endif
+
+#include <stdint.h>
+
+#define W25X_WriteEnable        0x06
+#define W25X_WriteDisable       0x04
+#define W25X_ReadStatusReg      0x05
+#define W25X_WriteStatusReg     0x01
+#define W25X_ReadData           0x03
+#define W25X_FastReadData       0x0B
+#define W25X_FastReadDual       0x3B
+#define W25X_PageProgram        0x02
+#define W25X_BlockErase         0xD8
+#define W25X_SectorErase        0x20
+#define W25X_ChipErase          0xC7
+#define W25X_PowerDown          0xB9
+#define W25X_ReleasePowerDown   0xAB
+#define W25X_DeviceID           0xAB
+#define W25X_ManufactDeviceID   0x90
+#define W25X_JedecDeviceID      0x9F
+
+#define WIP_Flag                0x01  /* Write In Progress (WIP) flag */
+
+#define Dummy_Byte              0xA5
+
+#define SPI_FLASH_SectorSize         4096
+#define SPI_FLASH_PageSize           256
+#define SPI_FLASH_PerWritePageSize   256
+
+#if 0
+
+  #define PIC_NAME_MAX_LEN        50
+
+  #define LOGO_MAX_SIZE           (300*1024)//logo<67><6F><EFBFBD>ֵ
+  #define TITLELOGO_MAX_SIZE      (150*1024)//logo<67><6F><EFBFBD>ֵ
+  #define DEFAULT_VIEW_MAX_SIZE   (200*200*2)
+  #define FLASH_VIEW_MAX_SIZE     (200*200*2)
+
+  //ͼƬ
+  //Robin2<6E>洢<EFBFBD><E6B4A2>ַ
+  #define PIC_NAME_ADDR           0x003000  //ͼƬ<CDBC><C6AC>Ϣ<EFBFBD>洢<EFBFBD><E6B4A2>ַ<EFBFBD><D6B7>ͼƬ<CDBC><C6AC><EFBFBD><EFBFBD>
+  #define PIC_SIZE_ADDR           0x007000  //ͼƬ<CDBC><C6AC>Ϣ<EFBFBD>洢<EFBFBD><E6B4A2>ַ<EFBFBD><D6B7>ͼƬ<CDBC><C6AC>Сֵ
+  #define PIC_COUNTER_ADDR        0x008000  //ͼƬ<CDBC><C6AC><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֵ<EFBFBD>洢<EFBFBD><E6B4A2>ַ
+  #define PIC_LOGO_ADDR           0x009000  //ͼƬlogo<67>洢<EFBFBD><E6B4A2>ַ
+  //#define PIC_DATA_ADDR         0x02f000  //ͼƬ<CDBC><C6AC><EFBFBD>ݴ洢<DDB4><E6B4A2>ַ
+
+  #define DEFAULT_VIEW_ADDR       0XC5800
+  #define BAK_VIEW_ADDR           (DEFAULT_VIEW_ADDR+90*1024)
+  #define PIC_ICON_LOGO_ADDR      (BAK_VIEW_ADDR+80*1024)
+
+  #define PIC_DATA_ADDR           (PIC_ICON_LOGO_ADDR+350*1024) //ͼƬ<CDBC><C6AC><EFBFBD>ݴ洢<DDB4><E6B4A2>ַ//(800*240)
+
+  // <20>ֿ<EFBFBD>
+  #define FONTINFOADDR            0x600000 // 6M<36>Ժ<EFBFBD><D4BA>ַΪ<D6B7>ֿ<EFBFBD>
+  #define UNIGBK_FLASH_ADDR       (FONTINFOADDR+4096) // 4*1024
+  #define GBK_FLASH_ADDR          (UNIGBK_FLASH_ADDR+180224) // 176*1024
+
+  #define PER_PIC_MAX_SPACE       (32*1024) // Ϊ<>˷<EFBFBD>ֹ<EFBFBD><D6B9><EFBFBD><EFBFBD>Խ<EFBFBD><D4BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>⣬ÿ<E2A3AC><C3BF>СͼƬ<CDBC><C6AC><EFBFBD><EFBFBD><EFBFBD>仮<EFBFBD><E4BBAE>Ӧ<EFBFBD><D3A6>ȡ<EFBFBD>ܹ<EFBFBD><DCB9><EFBFBD><EFBFBD><EFBFBD>4K<34><4B>ֵ
+
+  //
+  union union32 {
+    uint8_t bytes[4];
+    uint32_t dwords;
+  };
+  // ͼƬ<CDBC><C6AC>Ϣ<EFBFBD>ṹ<EFBFBD><E1B9B9>
+  struct pic_msg {
+    uint8_t name[PIC_NAME_MAX_LEN];
+    union union32 size;
+  };
+
+  typedef struct pic_msg PIC_MSG;
+
+#endif // if 0
+
+class ext_FLASH {
+public:
+  void init(uint8_t spiRate);
+  static uint8_t spi_flash_Rec();
+  static uint8_t spi_flash_read_write_byte(uint8_t data);
+  static void spi_flash_Read(uint8_t* buf, uint16_t nbyte);
+  static void spi_flash_Send(uint8_t b);
+  static void spi_flash_SendBlock(uint8_t token, const uint8_t* buf);
+  static uint16_t W25QXX_ReadID(void);
+  static void SPI_FLASH_WriteEnable(void);
+  static void SPI_FLASH_WaitForWriteEnd(void);
+  static void SPI_FLASH_SectorErase(uint32_t SectorAddr);
+  static void SPI_FLASH_BlockErase(uint32_t BlockAddr);
+  static void SPI_FLASH_BulkErase(void);
+  static void SPI_FLASH_PageWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite);
+  static void SPI_FLASH_BufferWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite);
+  static void SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead);
+  //uint32_t lv_get_pic_addr(uint8_t *Pname);
+  void lv_pic_read(uint8_t *P_Rbuff, uint32_t addr, uint32_t size);
+};
+
+extern ext_FLASH W25QXX;
+
+//extern uint32_t lv_get_pic_addr(uint8_t *Pname);
+
+//#ifdef __cplusplus
+//} /* C-declarations for C++ */
+//#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_about.cpp

@@ -0,0 +1,127 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../module/temperature.h"
+
+static lv_obj_t * scr;
+static lv_obj_t * fw_type, *board, *fw_version;
+
+#define ID_A_RETURN   1
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_A_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // do nothing
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+      break;
+  }
+}
+
+void lv_draw_about(void) {
+  lv_obj_t *buttonBack, *label_Back;
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != ABOUT_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = ABOUT_UI;
+  }
+  disp_state = ABOUT_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  #if 1
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_A_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+  /*Create a label on the Image button*/
+
+  label_Back = lv_label_create(buttonBack, NULL);
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+
+  fw_version = lv_label_create(scr, NULL);
+  lv_obj_set_style(fw_version, &tft_style_lable_rel);
+  lv_label_set_text(fw_version, "Version: V_2.0.5.3");
+  lv_obj_align(fw_version, NULL, LV_ALIGN_CENTER, 0, -60);
+
+  fw_type = lv_label_create(scr, NULL);
+  lv_obj_set_style(fw_type, &tft_style_lable_rel);
+  #if (MOTHERBOARD == BOARD_MKS_ROBIN_PRO)
+    lv_label_set_text(fw_type, "Firmware: Robin_Pro35");
+  #elif (MOTHERBOARD == BOARD_MKS_ROBIN_NANO)
+    lv_label_set_text(fw_type, "Firmware: Robin_Nano35");
+  #endif
+  lv_obj_align(fw_type, NULL, LV_ALIGN_CENTER, 0, -20);
+
+  board = lv_label_create(scr, NULL);
+  lv_obj_set_style(board, &tft_style_lable_rel);
+  #if (MOTHERBOARD == BOARD_MKS_ROBIN_PRO)
+    lv_label_set_text(board, "Board: MKS Robin pro");
+  #elif (MOTHERBOARD == BOARD_MKS_ROBIN_NANO)
+    lv_label_set_text(board, "Board: MKS Robin nano");
+  #endif
+
+  lv_obj_align(board, NULL, LV_ALIGN_CENTER, 0, 20);
+}
+
+void lv_clear_about() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_about.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_about(void);
+extern void lv_clear_about();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_change_speed.cpp

@@ -0,0 +1,336 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../module/temperature.h"
+#include "../../../../module/planner.h"
+
+static lv_obj_t * scr;
+static lv_obj_t * labelStep, *buttonStep, *buttonMov, *buttonExt;
+static lv_obj_t * labelMov, *labelExt;
+static lv_obj_t * printSpeedText;
+
+#define ID_C_ADD    1
+#define ID_C_DEC    2
+#define ID_C_MOVE   3
+#define ID_C_EXT    4
+#define ID_C_STEP   5
+#define ID_C_RETURN   6
+
+static uint8_t speedType;
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_C_ADD:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (speedType == 0) {
+          if (feedrate_percentage < MAX_EXT_SPEED_PERCENT - uiCfg.stepPrintSpeed)
+            feedrate_percentage += uiCfg.stepPrintSpeed;
+          else
+            feedrate_percentage = MAX_EXT_SPEED_PERCENT;
+        }
+        else if (speedType == 1) {
+          if (planner.flow_percentage[0] < MAX_EXT_SPEED_PERCENT - uiCfg.stepPrintSpeed)
+            planner.flow_percentage[0] += uiCfg.stepPrintSpeed;
+          else
+            planner.flow_percentage[0] = MAX_EXT_SPEED_PERCENT;
+          //planner.e_factor[0]= planner.flow_percentage[0]*0.01;
+          //planner.flow_percentage[1] = planner.flow_percentage[0];
+          //planner.e_factor[1]= planner.flow_percentage[1]*0.01;
+          planner.refresh_e_factor(0);
+          if (EXTRUDERS == 2) {
+            planner.flow_percentage[1] = planner.flow_percentage[0];
+            planner.refresh_e_factor(1);
+          }
+        }
+        disp_print_speed();
+      }
+      break;
+    case ID_C_DEC:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (speedType == 0) {
+          if (feedrate_percentage > MIN_EXT_SPEED_PERCENT + uiCfg.stepPrintSpeed)
+            feedrate_percentage -= uiCfg.stepPrintSpeed;
+          else
+            feedrate_percentage = MIN_EXT_SPEED_PERCENT;
+        }
+        else if (speedType == 1) {
+          if (planner.flow_percentage[0] > MIN_EXT_SPEED_PERCENT + uiCfg.stepPrintSpeed)
+            planner.flow_percentage[0] -= uiCfg.stepPrintSpeed;
+          else
+            planner.flow_percentage[0] = MIN_EXT_SPEED_PERCENT;
+          //planner.e_factor[0]= planner.flow_percentage[0] * 0.01;
+          //planner.flow_percentage[1] = planner.flow_percentage[0];
+          //planner.e_factor[1]= planner.flow_percentage[1] * 0.01;
+          planner.refresh_e_factor(0);
+          if (EXTRUDERS == 2) {
+            planner.flow_percentage[1] = planner.flow_percentage[0];
+            planner.refresh_e_factor(1);
+          }
+        }
+        disp_print_speed();
+      }
+      break;
+    case ID_C_MOVE:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        speedType = 0;
+        disp_speed_type();
+        disp_print_speed();
+      }
+      break;
+    case ID_C_EXT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        speedType = 1;
+        disp_speed_type();
+        disp_print_speed();
+      }
+      break;
+    case ID_C_STEP:
+      if (event == LV_EVENT_CLICKED) {
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (uiCfg.stepPrintSpeed == 1)
+          uiCfg.stepPrintSpeed = 5;
+        else if (uiCfg.stepPrintSpeed == 5)
+          uiCfg.stepPrintSpeed = 10;
+        else
+          uiCfg.stepPrintSpeed = 1;
+        disp_speed_step();
+      }
+      break;
+    case ID_C_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+      break;
+  }
+}
+
+void lv_draw_change_speed(void) {
+  lv_obj_t *buttonAdd, *buttonDec;
+  lv_obj_t *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != CHANGE_SPEED_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = CHANGE_SPEED_UI;
+  }
+  disp_state = CHANGE_SPEED_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonAdd = lv_imgbtn_create(scr, NULL);
+  buttonDec = lv_imgbtn_create(scr, NULL);
+  buttonMov = lv_imgbtn_create(scr, NULL);
+  buttonExt = lv_imgbtn_create(scr, NULL);
+  buttonStep = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonAdd, event_handler, ID_C_ADD, "bmp_Add.bin", 0);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonAdd, LV_PROTECT_FOLLOW);
+
+  #if 1
+    lv_obj_set_event_cb_mks(buttonDec, event_handler, ID_C_DEC, "bmp_Dec.bin", 0);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+
+    lv_imgbtn_set_src(buttonMov, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonMov, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonMov, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonMov, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_imgbtn_set_src(buttonExt, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonExt, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonExt, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonExt, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_imgbtn_set_src(buttonStep, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonStep, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonStep, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonStep, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_C_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonAdd, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonDec, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonMov, INTERVAL_V,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonExt, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonStep, BTN_X_PIXEL * 2 + INTERVAL_V * 3,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonAdd, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonDec, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonMov, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonExt, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonStep, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * labelAdd = lv_label_create(buttonAdd, NULL);
+  lv_obj_t * labelDec = lv_label_create(buttonDec, NULL);
+  labelMov = lv_label_create(buttonMov, NULL);
+  labelExt = lv_label_create(buttonExt, NULL);
+  labelStep = lv_label_create(buttonStep, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelAdd, speed_menu.add);
+    lv_obj_align(labelAdd, buttonAdd, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelDec, speed_menu.dec);
+    lv_obj_align(labelDec, buttonDec, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+  disp_speed_type();
+  disp_speed_step();
+
+  printSpeedText = lv_label_create(scr, NULL);
+  lv_obj_set_style(printSpeedText, &tft_style_lable_rel);
+  disp_print_speed();
+}
+
+void disp_speed_step() {
+  if (uiCfg.stepPrintSpeed == 1)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_C_STEP, "bmp_Step1_percent.bin", 0);
+  else if (uiCfg.stepPrintSpeed == 5)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_C_STEP, "bmp_Step5_percent.bin", 0);
+  else if (uiCfg.stepPrintSpeed == 10)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_C_STEP, "bmp_Step10_percent.bin", 0);
+
+  if (gCfgItems.multiple_language != 0) {
+    if (uiCfg.stepPrintSpeed == 1) {
+      lv_label_set_text(labelStep, speed_menu.step_1percent);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if (uiCfg.stepPrintSpeed == 5) {
+      lv_label_set_text(labelStep, speed_menu.step_5percent);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if (uiCfg.stepPrintSpeed == 10) {
+      lv_label_set_text(labelStep, speed_menu.step_10percent);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+}
+
+void disp_print_speed() {
+  char buf[30] = {0};
+
+  public_buf_l[0] = '\0';
+
+  if (speedType == 0) { //move
+    strcat(public_buf_l, speed_menu.move_speed);
+    strcat(public_buf_l, ": ");
+    sprintf(buf, "%d%%", feedrate_percentage);
+    strcat(public_buf_l, buf);
+  }
+  else if (speedType == 1) { // e1
+    strcat(public_buf_l, speed_menu.extrude_speed);
+    strcat(public_buf_l, ": ");
+    sprintf(buf, "%d%%", planner.flow_percentage[0]);
+    strcat(public_buf_l, buf);
+  }
+  lv_label_set_text(printSpeedText, public_buf_l);
+  lv_obj_align(printSpeedText, NULL, LV_ALIGN_CENTER, 0, -65);
+}
+
+void disp_speed_type() {
+  switch (speedType) {
+    case 1:
+      lv_obj_set_event_cb_mks(buttonExt, event_handler, ID_C_EXT, "bmp_Extruct_speed_sel.bin", 0);
+      lv_obj_set_event_cb_mks(buttonMov, event_handler, ID_C_MOVE, "bmp_Mov_speed.bin", 0);
+      break;
+
+    default:
+      lv_obj_set_event_cb_mks(buttonExt, event_handler, ID_C_EXT, "bmp_Extruct_speed.bin", 0);
+      lv_obj_set_event_cb_mks(buttonMov, event_handler, ID_C_MOVE, "bmp_Mov_speed_sel.bin", 0);
+      break;
+  }
+  lv_obj_refresh_ext_draw_pad(buttonExt);
+  lv_obj_refresh_ext_draw_pad(buttonMov);
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelMov, speed_menu.move);
+    lv_obj_align(labelMov, buttonMov, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelExt, speed_menu.extrude);
+    lv_obj_align(labelExt, buttonExt, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+}
+
+void lv_clear_change_speed() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_change_speed.h

@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+#define MIN_EXT_SPEED_PERCENT    10
+#define MAX_EXT_SPEED_PERCENT   999
+
+extern void lv_draw_change_speed(void);
+extern void lv_clear_change_speed();
+extern void disp_speed_step();
+extern void disp_print_speed();
+extern void disp_speed_type();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.cpp

@@ -0,0 +1,343 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * draw_dialog.cpp
+ */
+
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../sd/cardreader.h"
+#include "../../../../gcode/queue.h"
+#include "../../../../module/temperature.h"
+#include "../../../../module/planner.h"
+
+#if ENABLED(POWER_LOSS_RECOVERY)
+  #include "../../../../feature/powerloss.h"
+#endif
+
+#if ENABLED(PARK_HEAD_ON_PAUSE)
+  #include "../../../../feature/pause.h"
+#endif
+
+static lv_obj_t * scr;
+extern uint8_t sel_id;
+extern uint8_t once_flag;
+extern uint8_t gcode_preview_over;
+uint8_t DialogType;
+
+static void btn_ok_event_cb(lv_obj_t * btn, lv_event_t event) {
+  if (event == LV_EVENT_CLICKED) {
+    // nothing to do
+  }
+  else if (event == LV_EVENT_RELEASED) {
+    if (DialogType == DIALOG_TYPE_PRINT_FILE) {
+      preview_gcode_prehandle(list_file.file_name[sel_id]);
+      reset_print_time();
+      start_print_time();
+
+      uiCfg.print_state = WORKING;
+      lv_clear_dialog();
+      lv_draw_printing();
+
+      #if ENABLED(SDSUPPORT)
+      if (gcode_preview_over != 1) {
+        char *cur_name;
+        cur_name = strrchr(list_file.file_name[sel_id], '/');
+
+        SdFile file, *curDir;
+        card.endFilePrint();
+        const char * const fname = card.diveToFile(true, curDir, cur_name);
+        if (!fname) return;
+        if (file.open(curDir, fname, O_READ)) {
+          gCfgItems.curFilesize = file.fileSize();
+          file.close();
+          update_spi_flash();
+        }
+        card.openFileRead(cur_name);
+        if (card.isFileOpen()) {
+          feedrate_percentage = 100;
+          //saved_feedrate_percentage = feedrate_percentage;
+          planner.flow_percentage[0] = 100;
+          planner.e_factor[0] = planner.flow_percentage[0] * 0.01f;
+          #if EXTRUDERS == 2
+            planner.flow_percentage[1] = 100;
+            planner.e_factor[1] = planner.flow_percentage[1] * 0.01f;
+          #endif
+          card.startFileprint();
+          #if ENABLED(POWER_LOSS_RECOVERY)
+            recovery.prepare();
+          #endif
+          once_flag = 0;
+        }
+      }
+      #endif
+    }
+    else if (DialogType == DIALOG_TYPE_STOP) {
+      stop_print_time();
+      lv_clear_dialog();
+      lv_draw_ready_print();
+
+      #if ENABLED(SDSUPPORT)
+        //card.endFilePrint();
+        //wait_for_heatup = false;
+        uiCfg.print_state = IDLE;
+        card.flag.abort_sd_printing = true;
+        //queue.clear();
+        //quickstop_stepper();
+        //print_job_timer.stop();
+        //thermalManager.disable_all_heaters();
+
+        //#if ENABLED(POWER_LOSS_RECOVERY)
+        //recovery.purge();
+        //#endif
+        //queue.enqueue_one_now(PSTR("G91"));
+        //queue.enqueue_one_now(PSTR("G1 Z10"));
+        //queue.enqueue_one_now(PSTR("G90"));
+        //queue.enqueue_one_now(PSTR("G28 X0 Y0"));
+        //queue.inject_P(PSTR("G91\nG1 Z10\nG90\nG28 X0 Y0\nM84\nM107"));
+      #endif
+    }
+    else if (DialogType == DIALOG_TYPE_FINISH_PRINT) {
+      clear_cur_ui();
+      lv_draw_ready_print();
+    }
+    #if ENABLED(ADVANCED_PAUSE_FEATURE)
+      else if (DialogType == DIALOG_PAUSE_MESSAGE_WAITING
+            || DialogType == DIALOG_PAUSE_MESSAGE_INSERT
+            || DialogType == DIALOG_PAUSE_MESSAGE_HEAT
+      ) {
+        wait_for_user = false;
+      }
+      else if (DialogType == DIALOG_PAUSE_MESSAGE_OPTION) {
+        pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE;
+      }
+      else if (DialogType == DIALOG_PAUSE_MESSAGE_RESUME) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+    #endif
+  }
+}
+
+static void btn_cancel_event_cb(lv_obj_t * btn, lv_event_t event) {
+  if (event == LV_EVENT_CLICKED) {
+    // nothing to do
+  }
+  else if (event == LV_EVENT_RELEASED) {
+    if (DialogType == DIALOG_PAUSE_MESSAGE_OPTION) {
+      #if ENABLED(ADVANCED_PAUSE_FEATURE)
+        pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;
+      #endif
+    }
+    else {
+      clear_cur_ui();
+      draw_return_ui();
+    }
+  }
+}
+
+void lv_draw_dialog(uint8_t type) {
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != DIALOG_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = DIALOG_UI;
+  }
+  disp_state = DIALOG_UI;
+
+  DialogType = type;
+
+  scr = lv_obj_create(NULL, NULL);
+
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  //LV_IMG_DECLARE(bmp_pic);
+
+  static lv_style_t style_btn_rel;                                   // A variable to store the released style
+  lv_style_copy(&style_btn_rel, &lv_style_plain);                    // Initialize from a built-in style
+  style_btn_rel.body.border.color = lv_color_hex3(0x269);
+  style_btn_rel.body.border.width = 1;
+  style_btn_rel.body.main_color = lv_color_hex3(0xADF);
+  style_btn_rel.body.grad_color = lv_color_hex3(0x46B);
+  style_btn_rel.body.shadow.width = 4;
+  style_btn_rel.body.shadow.type = LV_SHADOW_BOTTOM;
+  style_btn_rel.body.radius = LV_RADIUS_CIRCLE;
+  style_btn_rel.text.color = lv_color_hex3(0xDEF);
+  style_btn_rel.text.font = &gb2312_puhui32;
+
+  static lv_style_t style_btn_pr;                                    // A variable to store the pressed style
+  lv_style_copy(&style_btn_pr, &style_btn_rel);                      // Initialize from the released style
+  style_btn_pr.body.border.color = lv_color_hex3(0x46B);
+  style_btn_pr.body.main_color = lv_color_hex3(0x8BD);
+  style_btn_pr.body.grad_color = lv_color_hex3(0x24A);
+  style_btn_pr.body.shadow.width = 2;
+  style_btn_pr.text.color = lv_color_hex3(0xBCD);
+  style_btn_pr.text.font = &gb2312_puhui32;
+
+  lv_obj_t * labelDialog = lv_label_create(scr, NULL);
+  lv_obj_set_style(labelDialog, &tft_style_lable_rel);
+
+  if (DialogType == DIALOG_TYPE_FINISH_PRINT || DialogType == DIALOG_PAUSE_MESSAGE_RESUME) {
+    lv_obj_t * btnOk = lv_btn_create(scr, NULL);                     // Add a button the current screen
+    lv_obj_set_pos(btnOk, BTN_OK_X + 90, BTN_OK_Y);                  // Set its position
+    lv_obj_set_size(btnOk, 100, 50);                                 // Set its size
+    lv_obj_set_event_cb(btnOk, btn_ok_event_cb);
+    lv_btn_set_style(btnOk, LV_BTN_STYLE_REL, &style_btn_rel);       // Set the button's released style
+    lv_btn_set_style(btnOk, LV_BTN_STYLE_PR, &style_btn_pr);         // Set the button's pressed style
+    lv_obj_t * labelOk = lv_label_create(btnOk, NULL);               // Add a label to the button
+    lv_label_set_text(labelOk, print_file_dialog_menu.confirm);      // Set the labels text
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_WAITING
+           || DialogType == DIALOG_PAUSE_MESSAGE_INSERT
+           || DialogType == DIALOG_PAUSE_MESSAGE_HEAT) {
+    lv_obj_t * btnOk = lv_btn_create(scr, NULL);                     // Add a button the current screen
+    lv_obj_set_pos(btnOk, BTN_OK_X + 90, BTN_OK_Y);                  // Set its position
+    lv_obj_set_size(btnOk, 100, 50);                                 // Set its size
+    lv_obj_set_event_cb(btnOk, btn_ok_event_cb);
+    lv_btn_set_style(btnOk, LV_BTN_STYLE_REL, &style_btn_rel);       // Set the button's released style
+    lv_btn_set_style(btnOk, LV_BTN_STYLE_PR, &style_btn_pr);         // Set the button's pressed style
+    lv_obj_t * labelOk = lv_label_create(btnOk, NULL);               // Add a label to the button
+    lv_label_set_text(labelOk, print_file_dialog_menu.confirm);      // Set the labels text
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_PAUSING
+        || DialogType == DIALOG_PAUSE_MESSAGE_CHANGING
+        || DialogType == DIALOG_PAUSE_MESSAGE_UNLOAD
+        || DialogType == DIALOG_PAUSE_MESSAGE_LOAD
+        || DialogType == DIALOG_PAUSE_MESSAGE_PURGE
+        || DialogType == DIALOG_PAUSE_MESSAGE_RESUME
+        || DialogType == DIALOG_PAUSE_MESSAGE_HEATING
+  ) {
+    // nothing to do
+  }
+  else {
+    lv_obj_t * btnOk = lv_btn_create(scr, NULL);                     // Add a button the current screen
+    lv_obj_set_pos(btnOk, BTN_OK_X, BTN_OK_Y);                       // Set its position
+    lv_obj_set_size(btnOk, 100, 50);                                 // Set its size
+    lv_obj_set_event_cb(btnOk, btn_ok_event_cb);
+    lv_btn_set_style(btnOk, LV_BTN_STYLE_REL, &style_btn_rel);       // Set the button's released style
+    lv_btn_set_style(btnOk, LV_BTN_STYLE_PR, &style_btn_pr);         // Set the button's pressed style
+    lv_obj_t * labelOk = lv_label_create(btnOk, NULL);               // Add a label to the button
+
+    lv_obj_t * btnCancel = lv_btn_create(scr, NULL);                 // Add a button the current screen
+    lv_obj_set_pos(btnCancel, BTN_CANCEL_X, BTN_CANCEL_Y);           // Set its position
+    lv_obj_set_size(btnCancel, 100, 50);                             // Set its size
+    lv_obj_set_event_cb(btnCancel, btn_cancel_event_cb);
+    lv_btn_set_style(btnCancel, LV_BTN_STYLE_REL, &style_btn_rel);   // Set the button's released style
+    lv_btn_set_style(btnCancel, LV_BTN_STYLE_PR, &style_btn_pr);     // Set the button's pressed style
+    lv_obj_t * labelCancel = lv_label_create(btnCancel, NULL);       // Add a label to the button
+
+    if (DialogType == DIALOG_PAUSE_MESSAGE_OPTION) {
+      lv_label_set_text(labelOk, pause_msg_menu.purgeMore);          // Set the labels text
+      lv_label_set_text(labelCancel, pause_msg_menu.continuePrint);
+    }
+    else {
+      lv_label_set_text(labelOk, print_file_dialog_menu.confirm);    // Set the labels text
+      lv_label_set_text(labelCancel, print_file_dialog_menu.cancle);
+    }
+  }
+  if (DialogType == DIALOG_TYPE_PRINT_FILE) {
+    lv_label_set_text(labelDialog, print_file_dialog_menu.print_file);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+
+    lv_obj_t * labelFile = lv_label_create(scr, NULL);
+    lv_obj_set_style(labelFile, &tft_style_lable_rel);
+
+    lv_label_set_text(labelFile, list_file.long_name[sel_id]);
+    lv_obj_align(labelFile, NULL, LV_ALIGN_CENTER, 0, -60);
+  }
+  else if (DialogType == DIALOG_TYPE_STOP) {
+    lv_label_set_text(labelDialog, print_file_dialog_menu.cancle_print);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_TYPE_FINISH_PRINT) {
+    lv_label_set_text(labelDialog, print_file_dialog_menu.print_finish);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_PAUSING) {
+    lv_label_set_text(labelDialog, pause_msg_menu.pausing);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_CHANGING) {
+    lv_label_set_text(labelDialog, pause_msg_menu.changing);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_UNLOAD) {
+    lv_label_set_text(labelDialog, pause_msg_menu.unload);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_WAITING) {
+    lv_label_set_text(labelDialog, pause_msg_menu.waiting);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_INSERT) {
+    lv_label_set_text(labelDialog, pause_msg_menu.insert);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_LOAD) {
+    lv_label_set_text(labelDialog, pause_msg_menu.load);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_PURGE) {
+    lv_label_set_text(labelDialog, pause_msg_menu.purge);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_RESUME) {
+    lv_label_set_text(labelDialog, pause_msg_menu.resume);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_HEAT) {
+    lv_label_set_text(labelDialog, pause_msg_menu.heat);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_HEATING) {
+    lv_label_set_text(labelDialog, pause_msg_menu.heating);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+  else if (DialogType == DIALOG_PAUSE_MESSAGE_OPTION) {
+    lv_label_set_text(labelDialog, pause_msg_menu.option);
+    lv_obj_align(labelDialog, NULL, LV_ALIGN_CENTER, 0, -20);
+  }
+}
+
+void lv_clear_dialog() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.h

@@ -0,0 +1,79 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+#define DIALOG_TYPE_STOP                             0
+#define DIALOG_TYPE_PRINT_FILE                       1
+#define DIALOG_TYPE_REPRINT_NO_FILE                  2
+
+#define DIALOG_TYPE_M80_FAIL                         3  //**
+#define DIALOG_TYPE_MESSEGE_ERR1                     4  //**
+
+#define DIALOG_TYPE_UPDATE_ESP_FIRMARE               5
+#define DIALOG_TYPE_UPDATE_ESP_DATA                  6
+#define DIALOG_TYPE_UPLOAD_FILE                      7
+#define DIALOG_TYPE_UNBIND                           8
+
+#define DIALOG_TYPE_FILAMENT_LOAD_HEAT               9
+#define DIALOG_TYPE_FILAMENT_HEAT_LOAD_COMPLETED    10
+#define DIALOG_TYPE_FILAMENT_LOADING                11
+#define DIALOG_TYPE_FILAMENT_LOAD_COMPLETED         12
+#define DIALOG_TYPE_FILAMENT_UNLOAD_HEAT            13
+#define DIALOG_TYPE_FILAMENT_HEAT_UNLOAD_COMPLETED  14
+#define DIALOG_TYPE_FILAMENT_UNLOADING              15
+#define DIALOG_TYPE_FILAMENT_UNLOAD_COMPLETED       16
+
+#define DIALOG_TYPE_FILE_LOADING                    17  //**
+
+#define DIALOG_TYPE_FILAMENT_NO_PRESS               18
+#define DIALOG_TYPE_FINISH_PRINT                    19
+
+#define WIFI_ENABLE_TIPS                            20
+
+#define DIALOG_PAUSE_MESSAGE_PAUSING                21
+#define DIALOG_PAUSE_MESSAGE_CHANGING               22
+#define DIALOG_PAUSE_MESSAGE_UNLOAD                 23
+#define DIALOG_PAUSE_MESSAGE_WAITING                24
+#define DIALOG_PAUSE_MESSAGE_INSERT                 25
+#define DIALOG_PAUSE_MESSAGE_LOAD                   26
+#define DIALOG_PAUSE_MESSAGE_PURGE                  27
+#define DIALOG_PAUSE_MESSAGE_RESUME                 28
+#define DIALOG_PAUSE_MESSAGE_HEAT                   29
+#define DIALOG_PAUSE_MESSAGE_HEATING                30
+#define DIALOG_PAUSE_MESSAGE_OPTION                 31
+
+#define BTN_OK_X      100
+#define BTN_OK_Y      180
+#define BTN_CANCEL_X  280
+#define BTN_CANCEL_Y  180
+
+extern void lv_draw_dialog(uint8_t type);
+extern void lv_clear_dialog();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_error_message.cpp

@@ -0,0 +1,84 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+#include "tft_lvgl_configuration.h"
+#include "mks_hardware_test.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+
+static lv_obj_t * scr;
+
+void lv_draw_error_message(PGM_P const msg) {
+  #if 0
+    static lv_obj_t * message = NULL, *kill_message = NULL, *reset_tips = NULL;
+    if (disp_state_stack._disp_state[disp_state_stack._disp_index] != ERROR_MESSAGE_UI) {
+      disp_state_stack._disp_index++;
+      disp_state_stack._disp_state[disp_state_stack._disp_index] = ERROR_MESSAGE_UI;
+    }
+    disp_state = ERROR_MESSAGE_UI;
+
+    scr = lv_obj_create(NULL, NULL);
+
+    lv_obj_set_style(scr, &tft_style_scr);
+    lv_scr_load(scr);
+    lv_obj_clean(scr);
+
+    lv_refr_now(lv_refr_get_disp_refreshing());
+
+    if (msg) {
+      message = lv_label_create(scr, NULL);
+      lv_obj_set_style(message, &tft_style_lable_rel);
+      lv_label_set_text(message, msg);
+      lv_obj_align(message, NULL, LV_ALIGN_CENTER, 0, -50);
+    }
+
+    kill_message = lv_label_create(scr, NULL);
+    lv_obj_set_style(kill_message, &tft_style_lable_rel);
+    lv_label_set_text(kill_message, "PRINTER HALTED");
+    lv_obj_align(kill_message, NULL, LV_ALIGN_CENTER, 0, -10);
+
+    reset_tips = lv_label_create(scr, NULL);
+    lv_obj_set_style(reset_tips, &tft_style_lable_rel);
+    lv_label_set_text(reset_tips, "Please Reset");
+    lv_obj_align(reset_tips, NULL, LV_ALIGN_CENTER, 0, 30);
+
+    lv_task_handler();
+  #endif
+  LCD_Clear(0x0000);
+  if (msg) disp_string((TFT_WIDTH - strlen(msg) * 16) / 2, 100, msg, 0xFFFF, 0x0000);
+  disp_string((TFT_WIDTH - strlen("PRINTER HALTED") * 16) / 2, 140, "PRINTER HALTED", 0xFFFF, 0x0000);
+  disp_string((TFT_WIDTH - strlen("Please Reset") * 16) / 2, 180, "Please Reset", 0xFFFF, 0x0000);
+
+}
+
+void lv_clear_error_message() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_error_message.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_error_message(PGM_P const msg);
+extern void lv_clear_error_message();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_extrusion.cpp

@@ -0,0 +1,378 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../module/temperature.h"
+#include "../../../../gcode/queue.h"
+
+static lv_obj_t * scr;
+static lv_obj_t * buttoType, *buttonStep, *buttonSpeed;
+static lv_obj_t * labelType;
+static lv_obj_t * labelStep;
+static lv_obj_t * labelSpeed;
+static lv_obj_t * tempText;
+static lv_obj_t * ExtruText;
+
+#define ID_E_ADD    1
+#define ID_E_DEC    2
+#define ID_E_TYPE   3
+#define ID_E_STEP   4
+#define ID_E_SPEED  5
+#define ID_E_RETURN 6
+
+static int32_t extructAmount;
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_E_ADD:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius >= EXTRUDE_MINTEMP) {
+          queue.enqueue_one_now(PSTR("G91"));
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf((char *)public_buf_l, "G1 E%d F%d", uiCfg.extruStep, 60 * uiCfg.extruSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+          queue.enqueue_one_now(PSTR("G90"));
+          extructAmount += uiCfg.extruStep;
+          disp_extru_amount();
+        }
+      }
+      break;
+    case ID_E_DEC:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius >= EXTRUDE_MINTEMP) {
+          queue.enqueue_one_now(PSTR("G91"));
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf((char *)public_buf_l, "G1 E%d F%d", 0 - uiCfg.extruStep, 60 * uiCfg.extruSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+          queue.enqueue_one_now(PSTR("G90"));
+          extructAmount -= uiCfg.extruStep;
+          disp_extru_amount();
+        }
+      }
+      break;
+    case ID_E_TYPE:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (EXTRUDERS == 2) {
+          if (uiCfg.curSprayerChoose == 0) {
+            uiCfg.curSprayerChoose = 1;
+            queue.inject_P(PSTR("T1"));
+          }
+          else {
+            uiCfg.curSprayerChoose = 0;
+            queue.inject_P(PSTR("T0"));
+          }
+        }
+        else {
+          uiCfg.curSprayerChoose = 0;
+        }
+        extructAmount = 0;
+        disp_hotend_temp();
+        disp_ext_type();
+        disp_extru_amount();
+      }
+      break;
+    case ID_E_STEP:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        switch (abs(uiCfg.extruStep)) {
+          case  1: uiCfg.extruStep = 5; break;
+          case  5: uiCfg.extruStep = 10; break;
+          case 10: uiCfg.extruStep = 1; break;
+          default: break;
+        }
+        disp_ext_step();
+      }
+      break;
+    case ID_E_SPEED:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        switch (uiCfg.extruSpeed) {
+          case  1: uiCfg.extruSpeed = 10; break;
+          case 10: uiCfg.extruSpeed = 20; break;
+          case 20: uiCfg.extruSpeed = 1; break;
+          default: break;
+        }
+        disp_ext_speed();
+      }
+      break;
+    case ID_E_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+      break;
+  }
+}
+
+
+void lv_draw_extrusion(void) {
+  lv_obj_t *buttonAdd, *buttonDec, *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != EXTRUSION_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = EXTRUSION_UI;
+  }
+  disp_state = EXTRUSION_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonAdd = lv_imgbtn_create(scr, NULL);
+  buttonDec = lv_imgbtn_create(scr, NULL);
+  buttoType = lv_imgbtn_create(scr, NULL);
+  buttonStep = lv_imgbtn_create(scr, NULL);
+  buttonSpeed = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonAdd, event_handler, ID_E_ADD, "bmp_In.bin", 0);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonAdd, LV_PROTECT_FOLLOW);
+
+  #if 1
+    lv_obj_set_event_cb_mks(buttonDec, event_handler, ID_E_DEC, "bmp_Out.bin", 0);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_imgbtn_set_src(buttoType, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttoType, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttoType, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttoType, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_imgbtn_set_src(buttonStep, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonStep, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonStep, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonStep, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_imgbtn_set_src(buttonSpeed, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonSpeed, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonSpeed, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonSpeed, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_E_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonAdd, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonDec, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttoType, INTERVAL_V,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonStep, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonSpeed, BTN_X_PIXEL * 2 + INTERVAL_V * 3,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonAdd, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonDec, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttoType, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonStep, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonSpeed, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * labelAdd = lv_label_create(buttonAdd, NULL);
+  lv_obj_t * labelDec = lv_label_create(buttonDec, NULL);
+  labelType = lv_label_create(buttoType, NULL);
+  labelStep = lv_label_create(buttonStep, NULL);
+  labelSpeed = lv_label_create(buttonSpeed, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelAdd, extrude_menu.in);
+    lv_obj_align(labelAdd, buttonAdd, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelDec, extrude_menu.out);
+    lv_obj_align(labelDec, buttonDec, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+
+  disp_ext_type();
+  disp_ext_step();
+  disp_ext_speed();
+
+  tempText = lv_label_create(scr, NULL);
+  lv_obj_set_style(tempText, &tft_style_lable_rel);
+  disp_hotend_temp();
+
+  ExtruText = lv_label_create(scr, NULL);
+  lv_obj_set_style(ExtruText, &tft_style_lable_rel);
+  disp_extru_amount();
+}
+
+void disp_ext_type() {
+  if (uiCfg.curSprayerChoose == 1) {
+    lv_obj_set_event_cb_mks(buttoType, event_handler, ID_E_TYPE, "bmp_Extru2.bin", 0);
+    if (gCfgItems.multiple_language != 0) {
+      lv_label_set_text(labelType, extrude_menu.ext2);
+      lv_obj_align(labelType, buttoType, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+  else {
+    lv_obj_set_event_cb_mks(buttoType, event_handler, ID_E_TYPE, "bmp_Extru1.bin", 0);
+    if (gCfgItems.multiple_language != 0) {
+      lv_label_set_text(labelType, extrude_menu.ext1);
+      lv_obj_align(labelType, buttoType, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+}
+
+void disp_ext_speed() {
+  if (uiCfg.extruSpeed == 20)
+    lv_obj_set_event_cb_mks(buttonSpeed, event_handler, ID_E_SPEED, "bmp_Speed_high.bin", 0);
+  else if (uiCfg.extruSpeed == 1)
+    lv_obj_set_event_cb_mks(buttonSpeed, event_handler, ID_E_SPEED, "bmp_Speed_slow.bin", 0);
+  else
+    lv_obj_set_event_cb_mks(buttonSpeed, event_handler, ID_E_SPEED, "bmp_Speed_normal.bin", 0);
+
+  if (gCfgItems.multiple_language != 0) {
+    if (uiCfg.extruSpeed == 20) {
+      lv_label_set_text(labelSpeed, extrude_menu.high);
+      lv_obj_align(labelSpeed, buttonSpeed, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if (uiCfg.extruSpeed == 1) {
+      lv_label_set_text(labelSpeed, extrude_menu.low);
+      lv_obj_align(labelSpeed, buttonSpeed, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else {
+      lv_label_set_text(labelSpeed, extrude_menu.normal);
+      lv_obj_align(labelSpeed, buttonSpeed, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+}
+
+void disp_hotend_temp() {
+  char buf[20] = {0};
+  public_buf_l[0] = '\0';
+  strcat(public_buf_l, extrude_menu.temper_text);
+  sprintf(buf, extrude_menu.temp_value, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius,  (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target);
+  strcat(public_buf_l, buf);
+  lv_label_set_text(tempText, public_buf_l);
+  lv_obj_align(tempText, NULL, LV_ALIGN_CENTER, 0, -50);
+}
+
+void disp_extru_amount() {
+  char buf1[10] = {0};
+
+  public_buf_l[0] = '\0';
+
+  if (extructAmount < 999 && extructAmount > -99) {
+    sprintf(buf1, extrude_menu.count_value_mm, extructAmount);
+    if (uiCfg.curSprayerChoose < 1)
+      strcat(public_buf_l, extrude_menu.ext1);
+    else
+      strcat(public_buf_l, extrude_menu.ext2);
+    strcat(public_buf_l, buf1);
+  }
+  else if (extructAmount < 9999 && extructAmount > -999) {
+    sprintf(buf1, extrude_menu.count_value_cm, extructAmount / 10);
+    if (uiCfg.curSprayerChoose < 1)
+      strcat(public_buf_l, extrude_menu.ext1);
+    else
+      strcat(public_buf_l, extrude_menu.ext2);
+    strcat(public_buf_l, buf1);
+  }
+  else {
+    sprintf(buf1, extrude_menu.count_value_m, extructAmount / 1000);
+    if (uiCfg.curSprayerChoose < 1)
+      strcat(public_buf_l, extrude_menu.ext1);
+    else
+      strcat(public_buf_l, extrude_menu.ext2);
+    strcat(public_buf_l, buf1);
+  }
+
+  lv_label_set_text(ExtruText, public_buf_l);
+  lv_obj_align(ExtruText, NULL, LV_ALIGN_CENTER, 0, -75);
+}
+
+void disp_ext_step() {
+  if (uiCfg.extruStep == 1)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_E_STEP, "bmp_Step1_mm.bin", 0);
+  else if (uiCfg.extruStep == 5)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_E_STEP, "bmp_Step5_mm.bin", 0);
+  else if (uiCfg.extruStep == 10)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_E_STEP, "bmp_Step10_mm.bin", 0);
+
+  if (gCfgItems.multiple_language != 0) {
+    if (uiCfg.extruStep == 1) {
+      lv_label_set_text(labelStep, extrude_menu.step_1mm);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if (uiCfg.extruStep == 5) {
+      lv_label_set_text(labelStep, extrude_menu.step_5mm);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if (uiCfg.extruStep == 10) {
+      lv_label_set_text(labelStep, extrude_menu.step_10mm);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+}
+
+void lv_clear_extrusion() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_extrusion.h

@@ -0,0 +1,39 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_extrusion(void);
+extern void lv_clear_extrusion();
+extern void disp_ext_type();
+extern void disp_ext_step();
+extern void disp_ext_speed();
+extern void disp_hotend_temp();
+extern void disp_extru_amount();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_fan.cpp

@@ -0,0 +1,247 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+#include "lv_conf.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+#include "../../../../../Configuration.h"
+#include "draw_ui.h"
+#include "../../../../module/temperature.h"
+#include "../../../../gcode/queue.h"
+
+static lv_obj_t * scr;
+static lv_obj_t * fanText;
+
+#define ID_F_ADD     1
+#define ID_F_DEC     2
+#define ID_F_HIGH    3
+#define ID_F_MID     4
+#define ID_F_OFF     5
+#define ID_F_RETURN  6
+
+static uint8_t fanSpeed;
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_F_ADD:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (fanSpeed + 1 <= 255) {
+          fanSpeed++;
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf(public_buf_l, "M106 S%d", fanSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+        }
+      }
+      break;
+    case ID_F_DEC:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (fanSpeed > 0) {
+          fanSpeed--;
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf(public_buf_l, "M106 S%d", fanSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+        }
+      }
+
+      break;
+    case ID_F_HIGH:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.enqueue_one_now(PSTR("M106 S255"));
+      }
+      break;
+    case ID_F_MID:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.enqueue_one_now(PSTR("M106 S127"));
+      }
+      break;
+    case ID_F_OFF:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.enqueue_one_now(PSTR("M107"));
+      }
+      break;
+    case ID_F_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+      break;
+  }
+}
+
+
+void lv_draw_fan(void) {
+  lv_obj_t *buttonAdd, *buttonDec, *buttonHigh, *buttonMid;
+  lv_obj_t *buttonOff, *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != FAN_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = FAN_UI;
+  }
+  disp_state = FAN_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonAdd = lv_imgbtn_create(scr, NULL);
+  buttonDec = lv_imgbtn_create(scr, NULL);
+  buttonHigh = lv_imgbtn_create(scr, NULL);
+  buttonMid = lv_imgbtn_create(scr, NULL);
+  buttonOff = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonAdd, event_handler, ID_F_ADD, "bmp_Add.bin", 0);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonAdd, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonDec, event_handler, ID_F_DEC, "bmp_Dec.bin", 0);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonHigh, event_handler, ID_F_HIGH, "bmp_Speed255.bin", 0);
+    lv_imgbtn_set_src(buttonHigh, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonHigh, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonHigh, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonHigh, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonMid, event_handler, ID_F_MID, "bmp_Speed127.bin", 0);
+    lv_imgbtn_set_src(buttonMid, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonMid, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonMid, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonMid, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonOff, event_handler, ID_F_OFF, "bmp_Speed0.bin", 0);
+    lv_imgbtn_set_src(buttonOff, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonOff, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonOff, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonOff, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_F_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonAdd, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonDec, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonHigh, INTERVAL_V, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonMid, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonOff, BTN_X_PIXEL * 2 + INTERVAL_V * 3, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonAdd, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonDec, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonHigh, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonMid, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonOff, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * labelAdd = lv_label_create(buttonAdd, NULL);
+  lv_obj_t * labelDec = lv_label_create(buttonDec, NULL);
+  lv_obj_t * labelHigh = lv_label_create(buttonHigh, NULL);
+  lv_obj_t * labelMid = lv_label_create(buttonMid, NULL);
+  lv_obj_t * labelOff = lv_label_create(buttonOff, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelAdd, fan_menu.add);
+    lv_obj_align(labelAdd, buttonAdd, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelDec, fan_menu.dec);
+    lv_obj_align(labelDec, buttonDec, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelHigh, fan_menu.full);
+    lv_obj_align(labelHigh, buttonHigh, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelMid, fan_menu.half);
+    lv_obj_align(labelMid, buttonMid, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelOff, fan_menu.off);
+    lv_obj_align(labelOff, buttonOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+
+  fanText = lv_label_create(scr, NULL);
+  lv_obj_set_style(fanText, &tft_style_lable_rel);
+  disp_fan_value();
+}
+
+void disp_fan_value() {
+  char buf1[10] = {0};
+  public_buf_l[0] = '\0';
+  strcat(public_buf_l, fan_menu.state);
+  strcat(public_buf_l, ": ");
+  sprintf(buf1, "%3d", thermalManager.fan_speed[0]);
+  strcat(public_buf_l, buf1);
+  lv_label_set_text(fanText, public_buf_l);
+  lv_obj_align(fanText, NULL, LV_ALIGN_CENTER, 0, -65);
+}
+
+void lv_clear_fan() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_fan.h

@@ -0,0 +1,35 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_fan(void);
+extern void lv_clear_fan();
+extern void disp_fan_value();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_home.cpp

@@ -0,0 +1,283 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+#include "draw_ready_print.h"
+#include "draw_set.h"
+#include "lv_conf.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+#include "draw_ui.h"
+#include "../../../../gcode/queue.h"
+
+static lv_obj_t * scr;
+
+#define ID_H_ALL      1
+#define ID_H_X        2
+#define ID_H_Y        3
+#define ID_H_Z        4
+#define ID_H_RETURN   5
+#define ID_H_OFF_ALL  6
+#define ID_H_OFF_XY   7
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_H_ALL:
+      if (event == LV_EVENT_CLICKED) {
+
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.inject_P(PSTR("G28"));
+      }
+      break;
+    case ID_H_X:
+      if (event == LV_EVENT_CLICKED) {
+
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.inject_P(PSTR("G28 X0"));
+      }
+      break;
+    case ID_H_Y:
+      if (event == LV_EVENT_CLICKED) {
+
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.inject_P(PSTR("G28 Y0"));
+      }
+      break;
+    case ID_H_Z:
+      if (event == LV_EVENT_CLICKED) {
+
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.inject_P(PSTR("G28 Z0"));
+      }
+      break;
+    case ID_H_OFF_ALL:
+      if (event == LV_EVENT_CLICKED) {
+
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.inject_P(PSTR("M84"));
+      }
+      break;
+    case ID_H_OFF_XY:
+      if (event == LV_EVENT_CLICKED) {
+
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        queue.inject_P(PSTR("M84 X Y"));
+      }
+      break;
+    case ID_H_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_obj_del(scr);
+        lv_draw_tool();
+      }
+      break;
+
+  }
+}
+
+
+void lv_draw_home(void) {
+  lv_obj_t *buttonHomeAll, *buttonHomeX, *buttonHomeY, *buttonHomeZ;
+  lv_obj_t *buttonBack;
+  lv_obj_t *buttonOffAll, *buttonOffXY;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != ZERO_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = ZERO_UI;
+  }
+  disp_state = ZERO_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  //static lv_style_t tool_style;
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  //buttonWifi = lv_imgbtn_create(scr, NULL);
+  buttonHomeAll = lv_imgbtn_create(scr, NULL);
+  buttonHomeX = lv_imgbtn_create(scr, NULL);
+  //buttonContinue = lv_imgbtn_create(scr, NULL);
+  buttonHomeY = lv_imgbtn_create(scr, NULL);
+  buttonHomeZ = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+  buttonOffAll = lv_imgbtn_create(scr, NULL);
+  buttonOffXY = lv_imgbtn_create(scr, NULL);
+
+  //lv_obj_set_event_cb_mks(buttonWifi, event_handler,ID_S_WIFI,"bmp_Wifi.bin",0);
+  //lv_imgbtn_set_src(buttonWifi, LV_BTN_STATE_REL, &bmp_pic);
+  //lv_imgbtn_set_src(buttonWifi, LV_BTN_STATE_PR, &bmp_pic);
+  //lv_imgbtn_set_style(buttonWifi, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  //lv_imgbtn_set_style(buttonWifi, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  //lv_obj_clear_protect(buttonWifi, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonHomeAll, event_handler, ID_H_ALL, "bmp_Zero.bin", 0);
+    lv_imgbtn_set_src(buttonHomeAll, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonHomeAll, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonHomeAll, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonHomeAll, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonHomeX, event_handler, ID_H_X, "bmp_zeroX.bin", 0);
+    lv_imgbtn_set_src(buttonHomeX, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonHomeX, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonHomeX, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonHomeX, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    //lv_obj_set_event_cb_mks(buttonContinue, event_handler,ID_S_CONTINUE,"bmp_Breakpoint.bin",0);
+    //lv_imgbtn_set_src(buttonContinue, LV_BTN_STATE_REL, &bmp_pic);
+    //lv_imgbtn_set_src(buttonContinue, LV_BTN_STATE_PR, &bmp_pic);
+    //lv_imgbtn_set_style(buttonContinue, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    //lv_imgbtn_set_style(buttonContinue, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonHomeY, event_handler, ID_H_Y, "bmp_zeroY.bin", 0);
+    lv_imgbtn_set_src(buttonHomeY, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonHomeY, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonHomeY, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonHomeY, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonHomeZ, event_handler, ID_H_Z, "bmp_zeroZ.bin", 0);
+    lv_imgbtn_set_src(buttonHomeZ, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonHomeZ, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonHomeZ, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonHomeZ, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonOffAll, event_handler, ID_H_OFF_ALL, "bmp_Motor_off.bin", 0);
+    lv_imgbtn_set_src(buttonOffAll, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonOffAll, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonOffAll, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonOffAll, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonOffXY, event_handler, ID_H_OFF_XY, "bmp_Motor_off.bin", 0);
+    lv_imgbtn_set_src(buttonOffXY, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonOffXY, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonOffXY, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonOffXY, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_H_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+         /*lv_obj_set_pos(buttonWifi,INTERVAL_V,titleHeight);
+         lv_obj_set_pos(buttonFan,BTN_X_PIXEL+INTERVAL_V*2,titleHeight);
+         lv_obj_set_pos(buttonAbout,BTN_X_PIXEL*2+INTERVAL_V*3,titleHeight);
+         lv_obj_set_pos(buttonContinue,BTN_X_PIXEL*3+INTERVAL_V*4,titleHeight);
+         lv_obj_set_pos(buMotorOff,INTERVAL_V,  BTN_Y_PIXEL+INTERVAL_H+titleHeight);
+         lv_obj_set_pos(buttonLanguage,BTN_X_PIXEL+INTERVAL_V*2,BTN_Y_PIXEL+INTERVAL_H+titleHeight);
+         lv_obj_set_pos(buttonBack,BTN_X_PIXEL*3+INTERVAL_V*4,  BTN_Y_PIXEL+INTERVAL_H+titleHeight);*/
+
+  //lv_obj_set_pos(buttonWifi,INTERVAL_V,titleHeight);
+  lv_obj_set_pos(buttonHomeX, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight);
+  lv_obj_set_pos(buttonHomeY, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight);
+  //lv_obj_set_pos(buttonContinue,BTN_X_PIXEL*3+INTERVAL_V*4,titleHeight);
+  lv_obj_set_pos(buttonHomeZ, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonHomeAll, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonOffAll, INTERVAL_V, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonOffXY, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  //lv_btn_set_layout(buttonWifi, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonHomeAll, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonHomeX, LV_LAYOUT_OFF);
+  //lv_btn_set_layout(buttonContinue, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonHomeY, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonHomeZ, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonOffAll, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonOffXY, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  //lv_obj_t * labelWifi= lv_label_create(buttonWifi, NULL);
+  lv_obj_t * labelHomeAll = lv_label_create(buttonHomeAll, NULL);
+  lv_obj_t * labelHomeX = lv_label_create(buttonHomeX, NULL);
+  //lv_obj_t * label_Continue = lv_label_create(buttonContinue, NULL);
+  lv_obj_t * labelHomeY = lv_label_create(buttonHomeY, NULL);
+  lv_obj_t * labelHomeZ = lv_label_create(buttonHomeZ, NULL);
+  lv_obj_t * labelOffAll = lv_label_create(buttonOffAll, NULL);
+  lv_obj_t * labelOffXY = lv_label_create(buttonOffXY, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+
+  if (gCfgItems.multiple_language != 0) {
+    //lv_label_set_text(labelWifi, set_menu.wifi);
+    //lv_obj_align(labelWifi, buttonWifi, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelHomeAll, home_menu.home_all);
+    lv_obj_align(labelHomeAll, buttonHomeAll, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelHomeX, home_menu.home_x);
+    lv_obj_align(labelHomeX, buttonHomeX, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    //lv_label_set_text(label_Continue, set_menu.breakpoint);
+    //lv_obj_align(label_Continue, buttonContinue, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelHomeY, home_menu.home_y);
+    lv_obj_align(labelHomeY, buttonHomeY, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelHomeZ, home_menu.home_z);
+    lv_obj_align(labelHomeZ, buttonHomeZ, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelOffAll, set_menu.motoroff);
+    lv_obj_align(labelOffAll, buttonOffAll, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelOffXY, set_menu.motoroffXY);
+    lv_obj_align(labelOffXY, buttonOffXY, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+}
+
+void lv_clear_home() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_home.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_home(void);
+extern void lv_clear_home();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_language.cpp

@@ -0,0 +1,370 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include <string.h>
+
+//static lv_obj_t *buttonMoveZ,*buttonTest,*buttonZ0,*buttonStop,*buttonReturn;
+
+#define ID_CN                           1
+#define ID_T_CN                         2
+#define ID_EN                           3
+#define ID_RU                           4
+#define ID_ES                           5
+#define ID_FR                           6
+#define ID_IT                           7
+#define ID_L_RETURN                     8
+
+#define SELECTED                        1
+#define UNSELECTED                      0
+
+static void disp_language(uint8_t language, uint8_t state);
+
+static lv_obj_t * scr;
+static lv_obj_t *buttonCN, *buttonT_CN, *buttonEN, *buttonRU;
+static lv_obj_t *buttonES, *buttonFR, *buttonIT, *buttonBack;
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_CN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        disp_language(gCfgItems.language, UNSELECTED);
+        lv_obj_set_event_cb_mks(buttonCN, event_handler, ID_CN, "bmp_Simple_cn_sel.bin", 0);
+        gCfgItems.language = LANG_SIMPLE_CHINESE;
+        gCfg_to_spiFlah();
+        disp_language_init();
+      }
+      break;
+    case ID_T_CN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        disp_language(gCfgItems.language, UNSELECTED);
+        lv_obj_set_event_cb_mks(buttonT_CN, event_handler, ID_T_CN, "bmp_Tradition_cn_sel.bin", 0);
+        gCfgItems.language = LANG_COMPLEX_CHINESE;
+        gCfg_to_spiFlah();
+        disp_language_init();
+      }
+      break;
+    case ID_EN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        disp_language(gCfgItems.language, UNSELECTED);
+        lv_obj_set_event_cb_mks(buttonEN, event_handler, ID_EN, "bmp_English_sel.bin", 0);
+        gCfgItems.language = LANG_ENGLISH;
+        gCfg_to_spiFlah();
+        disp_language_init();
+      }
+      break;
+    case ID_RU:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        disp_language(gCfgItems.language, UNSELECTED);
+        lv_obj_set_event_cb_mks(buttonRU, event_handler, ID_RU, "bmp_Russian_sel.bin", 0);
+        gCfgItems.language = LANG_RUSSIAN;
+        gCfg_to_spiFlah();
+        disp_language_init();
+      }
+      break;
+    case ID_ES:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        disp_language(gCfgItems.language, UNSELECTED);
+        lv_obj_set_event_cb_mks(buttonES, event_handler, ID_ES, "bmp_Spanish_sel.bin", 0);
+        gCfgItems.language = LANG_SPANISH;
+        gCfg_to_spiFlah();
+        disp_language_init();
+      }
+      break;
+    case ID_FR:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        disp_language(gCfgItems.language, UNSELECTED);
+        lv_obj_set_event_cb_mks(buttonFR, event_handler, ID_FR, "bmp_French_sel.bin", 0);
+        gCfgItems.language = LANG_FRENCH;
+        gCfg_to_spiFlah();
+        disp_language_init();
+      }
+      break;
+    case ID_IT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        disp_language(gCfgItems.language, UNSELECTED);
+        lv_obj_set_event_cb_mks(buttonIT, event_handler, ID_FR, "bmp_Italy_sel.bin", 0);
+        gCfgItems.language = LANG_ITALY;
+        gCfg_to_spiFlah();
+        disp_language_init();
+      }
+      break;
+    case ID_L_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+
+      }
+      else if (event == LV_EVENT_RELEASED) {
+
+        buttonCN = NULL;
+        buttonT_CN = NULL;
+        buttonEN = NULL;
+        buttonRU = NULL;
+        buttonES = NULL;
+        buttonFR = NULL;
+        buttonFR = NULL;
+        buttonIT = NULL;
+        buttonBack = NULL;
+
+        lv_obj_del(scr);
+        lv_draw_set();
+      }
+      break;
+
+  }
+}
+
+static void disp_language(uint8_t language, uint8_t state) {
+  uint16_t id;
+  lv_obj_t *obj;
+
+  public_buf_l[0] = '\0';
+
+  switch (language) {
+
+    case LANG_SIMPLE_CHINESE:
+      id = ID_CN;
+      strcat(public_buf_l, "bmp_Simple_cn");
+      obj = buttonCN;
+
+      break;
+    case LANG_COMPLEX_CHINESE:
+      id = ID_T_CN;
+      strcat(public_buf_l, "bmp_Tradition_cn");
+      obj = buttonT_CN;
+      break;
+    case LANG_ENGLISH:
+      id = ID_EN;
+      strcat(public_buf_l, "bmp_English");
+      obj = buttonEN;
+      break;
+    case LANG_RUSSIAN:
+      id = ID_RU;
+      strcat(public_buf_l, "bmp_Russian");
+      obj = buttonRU;
+      break;
+    case LANG_SPANISH:
+      id = ID_ES;
+      strcat(public_buf_l, "bmp_Spanish");
+      obj = buttonES;
+      break;
+    case LANG_FRENCH:
+      id = ID_FR;
+      strcat(public_buf_l, "bmp_French");
+      obj = buttonFR;
+      break;
+    case LANG_ITALY:
+      id = ID_IT;
+      strcat(public_buf_l, "bmp_Italy");
+      obj = buttonIT;
+      break;
+    default:
+      id = ID_CN;
+      strcat(public_buf_l, "bmp_Simple_cn");
+      obj = buttonCN;
+      break;
+  }
+
+  if (state == SELECTED) strcat(public_buf_l, "_sel.bin");
+  else strcat(public_buf_l, ".bin");
+
+  lv_obj_set_event_cb_mks(obj, event_handler, id, public_buf_l, 0);
+
+  if (state == UNSELECTED) lv_obj_refresh_ext_draw_pad(obj);
+}
+
+void lv_draw_language(void) {
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != LANGUAGE_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = LANGUAGE_UI;
+  }
+  disp_state = LANGUAGE_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  //static lv_style_t tool_style;
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonCN = lv_imgbtn_create(scr, NULL);
+  buttonT_CN = lv_imgbtn_create(scr, NULL);
+  buttonEN = lv_imgbtn_create(scr, NULL);
+  buttonRU = lv_imgbtn_create(scr, NULL);
+  buttonES = lv_imgbtn_create(scr, NULL);
+  buttonFR = lv_imgbtn_create(scr, NULL);
+  buttonIT = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+
+  lv_obj_set_event_cb_mks(buttonCN, event_handler, ID_CN, "bmp_Simple_cn.bin", 0);
+  lv_imgbtn_set_src(buttonCN, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonCN, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonCN, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonCN, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonCN, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonT_CN, event_handler, ID_T_CN, "bmp_Tradition_cn.bin", 0);
+    lv_imgbtn_set_src(buttonT_CN, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonT_CN, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonT_CN, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonT_CN, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonEN, event_handler, ID_EN, "bmp_English.bin", 0);
+    lv_imgbtn_set_src(buttonEN, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonEN, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonEN, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonEN, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonRU, event_handler, ID_RU, "bmp_Russian.bin", 0);
+    lv_imgbtn_set_src(buttonRU, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonRU, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonRU, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonRU, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonES, event_handler, ID_ES, "bmp_Spanish.bin", 0);
+    lv_imgbtn_set_src(buttonES, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonES, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonES, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonES, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonFR, event_handler, ID_FR, "bmp_French.bin", 0);
+    lv_imgbtn_set_src(buttonFR, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonFR, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonFR, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonFR, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonIT, event_handler, ID_IT, "bmp_Italy.bin", 0);
+    lv_imgbtn_set_src(buttonIT, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonIT, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonIT, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonIT, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_L_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonCN, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonT_CN, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight);
+  lv_obj_set_pos(buttonEN, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight);
+  lv_obj_set_pos(buttonRU, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonES, INTERVAL_V,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonFR, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonIT, BTN_X_PIXEL * 2 + INTERVAL_V * 3,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonCN, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonT_CN, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonEN, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonRU, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonES, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonFR, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonIT, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * label_CN = lv_label_create(buttonCN, NULL);
+  lv_obj_t * label_T_CN = lv_label_create(buttonT_CN, NULL);
+  lv_obj_t * label_EN = lv_label_create(buttonEN, NULL);
+  lv_obj_t * label_RU = lv_label_create(buttonRU, NULL);
+  lv_obj_t * label_ES = lv_label_create(buttonES, NULL);
+  lv_obj_t * label_FR = lv_label_create(buttonFR, NULL);
+  lv_obj_t * label_IT = lv_label_create(buttonIT, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+  disp_language(gCfgItems.language, SELECTED);
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(label_CN, language_menu.chinese_s);
+    lv_obj_align(label_CN, buttonCN, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_T_CN, language_menu.chinese_t);
+    lv_obj_align(label_T_CN, buttonT_CN, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_EN, language_menu.english);
+    lv_obj_align(label_EN, buttonEN, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_RU, language_menu.russian);
+    lv_obj_align(label_RU, buttonRU, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_ES, language_menu.spanish);
+    lv_obj_align(label_ES, buttonES, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_FR, language_menu.french);
+    lv_obj_align(label_FR, buttonFR, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_IT, language_menu.italy);
+    lv_obj_align(label_IT, buttonIT, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+}
+
+void lv_clear_language() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_language.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_language(void);
+extern void lv_clear_language();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.cpp

@@ -0,0 +1,284 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+#include "lv_conf.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+#include "draw_ui.h"
+#include "../../../../gcode/queue.h"
+
+//static lv_obj_t *buttonMoveZ,*buttonTest,*buttonZ0,*buttonStop,*buttonReturn;
+static lv_obj_t * scr;
+
+#define ID_M_POINT1             1
+#define ID_M_POINT2             2
+#define ID_M_POINT3             3
+#define ID_M_POINT4             4
+#define ID_M_POINT5             5
+
+#define ID_MANUAL_RETURN                6
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_M_POINT1:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+
+        if (queue.length == 0) {
+          if (uiCfg.leveling_first_time) {
+            queue.enqueue_one_P(PSTR("G28"));
+            uiCfg.leveling_first_time = 0;
+          }
+
+          queue.enqueue_one_P(PSTR("G1 Z10"));
+
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf(public_buf_l, "G1 X%d Y%d", X_MIN_POS + 30, Y_MIN_POS + 30);
+          queue.enqueue_one_P(PSTR(public_buf_l));
+          queue.enqueue_one_P(PSTR("G1 Z0"));
+        }
+      }
+      break;
+    case ID_M_POINT2:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length == 0) {
+          if (uiCfg.leveling_first_time) {
+            queue.enqueue_one_P(PSTR("G28"));
+            uiCfg.leveling_first_time = 0;
+          }
+
+          queue.enqueue_one_P(PSTR("G1 Z10"));
+
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf(public_buf_l, "G1 X%d Y%d", X_MAX_POS - 30, Y_MIN_POS + 30);
+          queue.enqueue_one_P(PSTR(public_buf_l));
+          queue.enqueue_one_P(PSTR("G1 Z0"));
+        }
+      }
+      break;
+    case ID_M_POINT3:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length == 0) {
+          if (uiCfg.leveling_first_time) {
+            queue.enqueue_one_P(PSTR("G28"));
+            uiCfg.leveling_first_time = 0;
+          }
+
+          queue.enqueue_one_P(PSTR("G1 Z10"));
+
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf(public_buf_l, "G1 X%d Y%d", X_MAX_POS - 30, Y_MAX_POS - 30);
+          queue.enqueue_one_P(PSTR(public_buf_l));
+          queue.enqueue_one_P(PSTR("G1 Z0"));
+        }
+      }
+
+      break;
+    case ID_M_POINT4:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length == 0) {
+          if (uiCfg.leveling_first_time) {
+            queue.enqueue_one_P(PSTR("G28"));
+            uiCfg.leveling_first_time = 0;
+          }
+
+          queue.enqueue_one_P(PSTR("G1 Z10"));
+
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf(public_buf_l, "G1 X%d Y%d", X_MIN_POS + 30, Y_MAX_POS - 30);
+          queue.enqueue_one_P(PSTR(public_buf_l));
+          queue.enqueue_one_P(PSTR("G1 Z0"));
+        }
+      }
+      break;
+    case ID_M_POINT5:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length == 0) {
+          if (uiCfg.leveling_first_time) {
+            queue.enqueue_one_P(PSTR("G28"));
+            uiCfg.leveling_first_time = 0;
+          }
+
+          queue.enqueue_one_P(PSTR("G1 Z10"));
+
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          sprintf(public_buf_l, "G1 X%d Y%d", X_BED_SIZE / 2, Y_BED_SIZE / 2);
+          queue.enqueue_one_P(PSTR(public_buf_l));
+          queue.enqueue_one_P(PSTR("G1 Z0"));
+        }
+      }
+
+      break;
+    case ID_MANUAL_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_manualLevel();
+        lv_draw_tool();
+      }
+      break;
+
+  }
+}
+
+
+void lv_draw_manualLevel(void) {
+  lv_obj_t *buttonPoint1, *buttonPoint2, *buttonPoint3, *buttonPoint4, *buttonPoint5;
+  lv_obj_t *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != LEVELING_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = LEVELING_UI;
+  }
+  disp_state = LEVELING_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  //static lv_style_t tool_style;
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonPoint1 = lv_imgbtn_create(scr, NULL);
+  buttonPoint2 = lv_imgbtn_create(scr, NULL);
+  buttonPoint3 = lv_imgbtn_create(scr, NULL);
+  buttonPoint4 = lv_imgbtn_create(scr, NULL);
+  buttonPoint5 = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonPoint1, event_handler, ID_M_POINT1, "bmp_Leveling1.bin", 0);
+  lv_imgbtn_set_src(buttonPoint1, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonPoint1, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonPoint1, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonPoint1, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonPoint1, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonPoint2, event_handler, ID_M_POINT2, "bmp_Leveling2.bin", 0);
+    lv_imgbtn_set_src(buttonPoint2, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonPoint2, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonPoint2, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonPoint2, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonPoint3, event_handler, ID_M_POINT3, "bmp_Leveling3.bin", 0);
+    lv_imgbtn_set_src(buttonPoint3, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonPoint3, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonPoint3, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonPoint3, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonPoint4, event_handler, ID_M_POINT4, "bmp_Leveling4.bin", 0);
+    lv_imgbtn_set_src(buttonPoint4, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonPoint4, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonPoint4, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonPoint4, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonPoint5, event_handler, ID_M_POINT5, "bmp_Leveling5.bin", 0);
+    lv_imgbtn_set_src(buttonPoint5, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonPoint5, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonPoint5, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonPoint5, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_MANUAL_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonPoint1, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonPoint2, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight);
+  lv_obj_set_pos(buttonPoint3, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight);
+  lv_obj_set_pos(buttonPoint4, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonPoint5, INTERVAL_V,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonPoint1, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonPoint2, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonPoint3, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonPoint4, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonPoint5, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * label_Point1 = lv_label_create(buttonPoint1, NULL);
+  lv_obj_t * label_Point2 = lv_label_create(buttonPoint2, NULL);
+  lv_obj_t * label_Point3 = lv_label_create(buttonPoint3, NULL);
+  lv_obj_t * label_Point4 = lv_label_create(buttonPoint4, NULL);
+  lv_obj_t * label_Point5 = lv_label_create(buttonPoint5, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(label_Point1, leveling_menu.position1);
+    lv_obj_align(label_Point1, buttonPoint1, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Point2, leveling_menu.position2);
+    lv_obj_align(label_Point2, buttonPoint2, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Point3, leveling_menu.position3);
+    lv_obj_align(label_Point3, buttonPoint3, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Point4, leveling_menu.position4);
+    lv_obj_align(label_Point4, buttonPoint4, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Point5, leveling_menu.position5);
+    lv_obj_align(label_Point5, buttonPoint5, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+}
+
+void lv_clear_manualLevel() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_manualLevel(void);
+extern void lv_clear_manualLevel();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.cpp

@@ -0,0 +1,329 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+#include "lv_conf.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+#include "draw_ui.h"
+#include "../../../../gcode/queue.h"
+
+static lv_obj_t * scr;
+
+static lv_obj_t * labelV, *buttonV;
+
+#define ID_M_X_P    1
+#define ID_M_X_N    2
+#define ID_M_Y_P    3
+#define ID_M_Y_N    4
+#define ID_M_Z_P    5
+#define ID_M_Z_N    6
+#define ID_M_STEP   7
+#define ID_M_RETURN 8
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_M_X_P:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length <= (BUFSIZE - 3)) {
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          queue.enqueue_one_P(PSTR("G91"));
+          sprintf(public_buf_l, "G1 X%3.1f F%d", uiCfg.move_dist, uiCfg.moveSpeed);
+          queue.enqueue_one_P(PSTR(public_buf_l));
+          queue.enqueue_one_P(PSTR("G90"));
+        }
+      }
+      break;
+    case ID_M_X_N:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length <= (BUFSIZE - 3)) {
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          queue.enqueue_one_now(PSTR("G91"));
+          sprintf(public_buf_l, "G1 X-%3.1f F%d", uiCfg.move_dist, uiCfg.moveSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+          queue.enqueue_one_now(PSTR("G90"));
+        }
+      }
+      break;
+    case ID_M_Y_P:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length <= (BUFSIZE - 3)) {
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          queue.enqueue_one_now(PSTR("G91"));
+          sprintf(public_buf_l, "G1 Y%3.1f F%d", uiCfg.move_dist, uiCfg.moveSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+          queue.enqueue_one_now(PSTR("G90"));
+        }
+      }
+      break;
+    case ID_M_Y_N:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length <= (BUFSIZE - 3)) {
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          queue.enqueue_one_now(PSTR("G91"));
+          sprintf(public_buf_l, "G1 Y-%3.1f F%d", uiCfg.move_dist, uiCfg.moveSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+          queue.enqueue_one_now(PSTR("G90"));
+        }
+      }
+      break;
+    case ID_M_Z_P:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length <= (BUFSIZE - 3)) {
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          queue.enqueue_one_now(PSTR("G91"));
+          sprintf(public_buf_l, "G1 Z%3.1f F%d", uiCfg.move_dist, uiCfg.moveSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+          queue.enqueue_one_now(PSTR("G90"));
+        }
+      }
+      break;
+    case ID_M_Z_N:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (queue.length <= (BUFSIZE - 3)) {
+          memset(public_buf_l, 0, sizeof(public_buf_l));
+          queue.enqueue_one_now(PSTR("G91"));
+          sprintf(public_buf_l, "G1 Z-%3.1f F%d", uiCfg.move_dist, uiCfg.moveSpeed);
+          queue.enqueue_one_now(PSTR(public_buf_l));
+          queue.enqueue_one_now(PSTR("G90"));
+        }
+      }
+      break;
+    case ID_M_STEP:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (abs(10 * (int)uiCfg.move_dist) == 100)
+          uiCfg.move_dist = 0.1;
+        else
+          uiCfg.move_dist *= (float)10;
+
+        disp_move_dist();
+      }
+
+      break;
+    case ID_M_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+      break;
+
+  }
+}
+
+
+void lv_draw_move_motor(void) {
+  lv_obj_t  *buttonXI, *buttonXD, *buttonYI, *buttonYD;
+  lv_obj_t        *buttonZI, *buttonZD, *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != MOVE_MOTOR_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = MOVE_MOTOR_UI;
+  }
+  disp_state = MOVE_MOTOR_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+
+  /*Create an Image button*/
+  buttonXI = lv_imgbtn_create(scr, NULL);
+  buttonXD = lv_imgbtn_create(scr, NULL);
+  buttonYI = lv_imgbtn_create(scr, NULL);
+  buttonYD = lv_imgbtn_create(scr, NULL);
+  buttonZI = lv_imgbtn_create(scr, NULL);
+  buttonZD = lv_imgbtn_create(scr, NULL);
+  buttonV = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonXI, event_handler, ID_M_X_P, "bmp_xAdd.bin", 0);
+  lv_imgbtn_set_src(buttonXI, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonXI, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonXI, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonXI, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonXI, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonXD, event_handler, ID_M_X_N, "bmp_xDec.bin", 0);
+    lv_imgbtn_set_src(buttonXD, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonXD, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonXD, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonXD, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonYI, event_handler, ID_M_Y_P, "bmp_yAdd.bin", 0);
+    lv_imgbtn_set_src(buttonYI, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonYI, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonYI, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonYI, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonYD, event_handler, ID_M_Y_N, "bmp_yDec.bin", 0);
+    lv_imgbtn_set_src(buttonYD, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonYD, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonYD, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonYD, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonZI, event_handler, ID_M_Z_P, "bmp_zAdd.bin", 0);
+    lv_imgbtn_set_src(buttonZI, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonZI, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonZI, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonZI, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonZD, event_handler, ID_M_Z_N, "bmp_zDec.bin", 0);
+    lv_imgbtn_set_src(buttonZD, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonZD, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonZD, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonZD, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    //lv_obj_set_event_cb_mks(buttonV, event_handler,ID_T_MORE,"bmp_More.bin",0);
+    lv_imgbtn_set_src(buttonV, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonV, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonV, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonV, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_M_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+  lv_obj_set_pos(buttonXI, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonYI, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight);
+  lv_obj_set_pos(buttonZI, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight);
+  lv_obj_set_pos(buttonV, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonXD, INTERVAL_V,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonYD, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonZD, BTN_X_PIXEL * 2 + INTERVAL_V * 3,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonXI, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonXD, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonYI, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonYD, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonZI, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonZD, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonV, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * labelXI = lv_label_create(buttonXI, NULL);
+  lv_obj_t * labelXD = lv_label_create(buttonXD, NULL);
+  lv_obj_t * labelYI = lv_label_create(buttonYI, NULL);
+  lv_obj_t * labelYD = lv_label_create(buttonYD, NULL);
+  lv_obj_t * labelZI = lv_label_create(buttonZI, NULL);
+  lv_obj_t * labelZD = lv_label_create(buttonZD, NULL);
+  labelV = lv_label_create(buttonV, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelXI, move_menu.x_add);
+    lv_obj_align(labelXI, buttonXI, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelXD, move_menu.x_dec);
+    lv_obj_align(labelXD, buttonXD, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelYI, move_menu.y_add);
+    lv_obj_align(labelYI, buttonYI, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelYD, move_menu.y_dec);
+    lv_obj_align(labelYD, buttonYD, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelZI, move_menu.z_add);
+    lv_obj_align(labelZI, buttonZI, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelZD, move_menu.z_dec);
+    lv_obj_align(labelZD, buttonZD, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+
+  disp_move_dist();
+}
+
+void disp_move_dist() {
+  //char buf[30] = {0};
+
+  if ((int)(10 * uiCfg.move_dist) == 1)
+    lv_obj_set_event_cb_mks(buttonV, event_handler, ID_M_STEP, "bmp_Step_move0_1.bin", 0);
+  else if ((int)(10 * uiCfg.move_dist) == 10)
+    lv_obj_set_event_cb_mks(buttonV, event_handler, ID_M_STEP, "bmp_Step_move1.bin", 0);
+  else if ((int)(10 * uiCfg.move_dist) == 100)
+    lv_obj_set_event_cb_mks(buttonV, event_handler, ID_M_STEP, "bmp_Step_move10.bin", 0);
+  if (gCfgItems.multiple_language != 0) {
+    if ((int)(10 * uiCfg.move_dist) == 1) {
+      lv_label_set_text(labelV, move_menu.step_01mm);
+      lv_obj_align(labelV, buttonV, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if ((int)(10 * uiCfg.move_dist) == 10) {
+      lv_label_set_text(labelV, move_menu.step_1mm);
+      lv_obj_align(labelV, buttonV, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if ((int)(10 * uiCfg.move_dist) == 100) {
+      lv_label_set_text(labelV, move_menu.step_10mm);
+      lv_obj_align(labelV, buttonV, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+}
+
+void lv_clear_move_motor() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.h

@@ -0,0 +1,35 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_move_motor(void);
+extern void lv_clear_move_motor();
+extern void disp_move_dist();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_opration.cpp

@@ -0,0 +1,322 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+
+static lv_obj_t * scr;
+
+#define ID_O_PRE_HEAT   1
+#define ID_O_EXTRUCT    2
+#define ID_O_MOV        3
+#define ID_O_FILAMENT   4
+#define ID_O_SPEED      5
+#define ID_O_RETURN     6
+#define ID_O_FAN        7
+#define ID_O_POWER_OFF  8
+
+static lv_obj_t *label_PowerOff;
+static lv_obj_t *buttonPowerOff;
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_O_PRE_HEAT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_opration();
+        lv_draw_preHeat();
+      }
+      break;
+    case ID_O_EXTRUCT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_opration();
+        lv_draw_extrusion();
+      }
+      break;
+    case ID_O_MOV:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_opration();
+        lv_draw_move_motor();
+      }
+      break;
+    case ID_O_FILAMENT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+      }
+      break;
+    case ID_O_FAN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_opration();
+        lv_draw_fan();
+      }
+      break;
+    case ID_O_SPEED:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_opration();
+        lv_draw_change_speed();
+      }
+      break;
+    case ID_O_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+      break;
+    case ID_O_POWER_OFF:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (gCfgItems.finish_power_off == 1) {
+          gCfgItems.finish_power_off = 0;
+          lv_obj_set_event_cb_mks(obj, event_handler, ID_O_POWER_OFF, "bmp_Mamual.bin", 0);
+          lv_label_set_text(label_PowerOff, printing_more_menu.manual);
+          lv_obj_align(label_PowerOff, buttonPowerOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+          lv_obj_refresh_ext_draw_pad(label_PowerOff);
+          update_spi_flash();
+        }
+        else {
+          gCfgItems.finish_power_off = 1;
+          lv_obj_set_event_cb_mks(obj, event_handler, ID_O_POWER_OFF, "bmp_Auto.bin", 0);
+          lv_label_set_text(label_PowerOff, printing_more_menu.auto_close);
+          lv_obj_align(label_PowerOff, buttonPowerOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+          lv_obj_refresh_ext_draw_pad(label_PowerOff);
+          update_spi_flash();
+        }
+      }
+      break;
+
+  }
+}
+
+void lv_draw_opration(void) {
+  lv_obj_t *buttonPreHeat, *buttonExtrusion, *buttonSpeed;
+  lv_obj_t *buttonBack, *buttonFan;
+  lv_obj_t *labelPreHeat, *labelExtrusion;
+  lv_obj_t *label_Back, *label_Speed, *label_Fan;
+  lv_obj_t *buttonMove = NULL, *label_Move = NULL;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != OPERATE_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = OPERATE_UI;
+  }
+  disp_state = OPERATE_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonPreHeat = lv_imgbtn_create(scr, NULL);
+  buttonExtrusion = lv_imgbtn_create(scr, NULL);
+  buttonFan = lv_imgbtn_create(scr, NULL);
+  buttonSpeed = lv_imgbtn_create(scr, NULL);
+
+  if (uiCfg.print_state != WORKING)
+    //buttonFilament = lv_imgbtn_create(scr, NULL);
+    //else
+    buttonMove = lv_imgbtn_create(scr, NULL);
+  buttonPowerOff = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonPreHeat, event_handler, ID_O_PRE_HEAT, "bmp_PreHeat.bin", 0);
+  lv_imgbtn_set_src(buttonPreHeat, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonPreHeat, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonPreHeat, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonPreHeat, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonPreHeat, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonExtrusion, event_handler, ID_O_EXTRUCT, "bmp_Extruct.bin", 0);
+    lv_imgbtn_set_src(buttonExtrusion, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonExtrusion, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonExtrusion, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonExtrusion, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonFan, event_handler, ID_O_FAN, "bmp_Fan.bin", 0);
+    lv_imgbtn_set_src(buttonFan, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonFan, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonFan, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonFan, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonSpeed, event_handler, ID_O_SPEED, "bmp_Speed.bin", 0);
+    lv_imgbtn_set_src(buttonSpeed, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonSpeed, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonSpeed, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonSpeed, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    if (uiCfg.print_state != WORKING) {
+      /*{
+          lv_obj_set_event_cb_mks(buttonFilament, event_handler,ID_O_FILAMENT,"bmp_Filamentchange.bin",0);
+          lv_imgbtn_set_src(buttonFilament, LV_BTN_STATE_REL, &bmp_pic);
+          lv_imgbtn_set_src(buttonFilament, LV_BTN_STATE_PR, &bmp_pic);
+          lv_imgbtn_set_style(buttonFilament, LV_BTN_STATE_PR, &tft_style_lable_pre);
+          lv_imgbtn_set_style(buttonFilament, LV_BTN_STATE_REL, &tft_style_lable_rel);
+      }
+      else*/
+      lv_obj_set_event_cb_mks(buttonMove, event_handler, ID_O_MOV, "bmp_Mov.bin", 0);
+      lv_imgbtn_set_src(buttonMove, LV_BTN_STATE_REL, &bmp_pic);
+      lv_imgbtn_set_src(buttonMove, LV_BTN_STATE_PR, &bmp_pic);
+      lv_imgbtn_set_style(buttonMove, LV_BTN_STATE_PR, &tft_style_lable_pre);
+      lv_imgbtn_set_style(buttonMove, LV_BTN_STATE_REL, &tft_style_lable_rel);
+    }
+    if (gCfgItems.finish_power_off == 1)
+      lv_obj_set_event_cb_mks(buttonPowerOff, event_handler, ID_O_POWER_OFF, "bmp_Auto.bin", 0);
+    else
+      lv_obj_set_event_cb_mks(buttonPowerOff, event_handler, ID_O_POWER_OFF, "bmp_Mamual.bin", 0);
+    lv_imgbtn_set_src(buttonPowerOff, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonPowerOff, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonPowerOff, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonPowerOff, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_O_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonPreHeat, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonExtrusion, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight);
+
+  lv_obj_set_pos(buttonFan, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight);
+  lv_obj_set_pos(buttonSpeed, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+
+  if (uiCfg.print_state != WORKING) {
+    /*{
+            lv_obj_set_pos(buttonFilament,INTERVAL_V,BTN_Y_PIXEL+INTERVAL_H+titleHeight);
+    }
+    else*/
+    lv_obj_set_pos(buttonMove, INTERVAL_V, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+    lv_obj_set_pos(buttonPowerOff, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  }
+  else {
+    lv_obj_set_pos(buttonPowerOff, INTERVAL_V, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  }
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonPreHeat, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonExtrusion, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonFan, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonSpeed, LV_LAYOUT_OFF);
+
+  if (uiCfg.print_state != WORKING)
+  /*{
+          lv_btn_set_layout(buttonFilament, LV_LAYOUT_OFF);
+  }
+  else*/
+    lv_btn_set_layout(buttonMove, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonPowerOff, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  labelPreHeat = lv_label_create(buttonPreHeat, NULL);
+  labelExtrusion = lv_label_create(buttonExtrusion, NULL);
+
+  label_Fan = lv_label_create(buttonFan, NULL);
+  label_Speed = lv_label_create(buttonSpeed, NULL);
+
+  if (uiCfg.print_state != WORKING)
+  /*{
+          label_Filament = lv_label_create(buttonFilament, NULL);
+  }
+  else*/
+    label_Move = lv_label_create(buttonMove, NULL);
+  label_PowerOff = lv_label_create(buttonPowerOff, NULL);
+
+  label_Back = lv_label_create(buttonBack, NULL);
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelPreHeat, operation_menu.temp);
+    lv_obj_align(labelPreHeat, buttonPreHeat, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelExtrusion, operation_menu.extr);
+    lv_obj_align(labelExtrusion, buttonExtrusion, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Fan, operation_menu.fan);
+    lv_obj_align(label_Fan, buttonFan, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Speed, operation_menu.speed);
+    lv_obj_align(label_Speed, buttonSpeed, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    if (uiCfg.print_state != WORKING) {
+      /*{
+          lv_label_set_text(label_Filament, operation_menu.filament);
+          lv_obj_align(label_Filament, buttonFilament, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+      }
+      else*/
+      lv_label_set_text(label_Move, operation_menu.move);
+      lv_obj_align(label_Move, buttonMove, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+
+    if (gCfgItems.finish_power_off == 1)
+      lv_label_set_text(label_PowerOff, printing_more_menu.auto_close);
+    else
+      lv_label_set_text(label_PowerOff, printing_more_menu.manual);
+    lv_obj_align(label_PowerOff, buttonPowerOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+}
+
+void lv_clear_opration() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_opration.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_opration(void);
+extern void lv_clear_opration();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_pause_message.cpp

@@ -0,0 +1,55 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if BOTH(TFT_LITTLE_VGL_UI, ADVANCED_PAUSE_FEATURE)
+
+#include "draw_ui.h"
+#include "lv_conf.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../feature/pause.h"
+
+void lv_draw_pause_message(const PauseMessage msg) {
+  switch (msg) {
+    case PAUSE_MESSAGE_PAUSING:  clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_PAUSING); break;
+    case PAUSE_MESSAGE_CHANGING: clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_CHANGING); break;
+    case PAUSE_MESSAGE_UNLOAD:   clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_UNLOAD); break;
+    case PAUSE_MESSAGE_WAITING:  clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_WAITING); break;
+    case PAUSE_MESSAGE_INSERT:   clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_INSERT); break;
+    case PAUSE_MESSAGE_LOAD:     clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_LOAD); break;
+    case PAUSE_MESSAGE_PURGE:    clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_PURGE); break;
+    case PAUSE_MESSAGE_RESUME:   clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_RESUME); break;
+    case PAUSE_MESSAGE_HEAT:     clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_HEAT); break;
+    case PAUSE_MESSAGE_HEATING:  clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_HEATING); break;
+    case PAUSE_MESSAGE_OPTION:   pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
+      clear_cur_ui(); lv_draw_dialog(DIALOG_PAUSE_MESSAGE_OPTION); break;
+    case PAUSE_MESSAGE_STATUS:
+    default: break;
+  }
+}
+
+#endif // TFT_LITTLE_VGL_UI && ADVANCED_PAUSE_FEATURE

Marlin/src/lcd/extui/lib/mks_ui/draw_pause_message.h

@@ -0,0 +1,33 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_pause_message(const PauseMessage msg);
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_preHeat.cpp

@@ -0,0 +1,392 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../module/temperature.h"
+
+static lv_obj_t * scr;
+static lv_obj_t *buttoType, *buttonStep;
+static lv_obj_t * labelType;
+static lv_obj_t * labelStep;
+static lv_obj_t * tempText1;
+
+#define ID_P_ADD    1
+#define ID_P_DEC    2
+#define ID_P_TYPE   3
+#define ID_P_STEP   4
+#define ID_P_OFF    5
+#define ID_P_RETURN 6
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_P_ADD:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (uiCfg.curTempType == 0) {
+          thermalManager.temp_hotend[uiCfg.curSprayerChoose].target += uiCfg.stepHeat;
+          if (uiCfg.curSprayerChoose == 0) {
+            if ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target > (HEATER_0_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1))) {
+              thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = (float)HEATER_0_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1);
+
+              thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
+            }
+          }
+          #if !defined(SINGLENOZZLE) && EXTRUDERS >= 2
+          else    if ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target > (HEATER_1_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1))) {
+            thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = (float)HEATER_1_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1);
+
+            thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
+          }
+          #endif
+        }
+        #if HAS_HEATED_BED
+        else {
+
+          thermalManager.temp_bed.target += uiCfg.stepHeat;
+
+          if ((int)thermalManager.temp_bed.target > BED_MAXTEMP - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1)) {
+            thermalManager.temp_bed.target = (float)BED_MAXTEMP - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1);
+            thermalManager.start_watching_bed();
+          }
+
+        }
+        #endif
+        disp_desire_temp();
+      }
+      break;
+    case ID_P_DEC:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (uiCfg.curTempType == 0) {
+          if ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target > uiCfg.stepHeat) {
+            thermalManager.temp_hotend[uiCfg.curSprayerChoose].target -= uiCfg.stepHeat;
+            thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
+          }
+          else {
+            thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = (float)0;
+            thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
+          }
+        }
+        #if HAS_HEATED_BED
+        else {
+          if ((int)thermalManager.temp_bed.target > uiCfg.stepHeat) {
+            thermalManager.temp_bed.target -= uiCfg.stepHeat;
+            thermalManager.start_watching_bed();
+          }
+          else {
+            thermalManager.temp_bed.target = (float)0;
+            thermalManager.start_watching_bed();
+          }
+        }
+        #endif
+        disp_desire_temp();
+      }
+
+      break;
+    case ID_P_TYPE:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (uiCfg.curTempType == 0) {
+          if (EXTRUDERS == 2) {
+            if (uiCfg.curSprayerChoose == 0) {
+              uiCfg.curSprayerChoose = 1;
+            }
+            else if (uiCfg.curSprayerChoose == 1) {
+              if (TEMP_SENSOR_BED != 0) {
+                uiCfg.curTempType = 1;
+              }
+              else {
+                uiCfg.curTempType = 0;
+                uiCfg.curSprayerChoose = 0;
+              }
+            }
+          }
+          else    if (uiCfg.curSprayerChoose == 0) {
+            if (TEMP_SENSOR_BED != 0)
+              uiCfg.curTempType = 1;
+            else
+              uiCfg.curTempType = 0;
+          }
+        }
+        else if (uiCfg.curTempType == 1) {
+          uiCfg.curSprayerChoose = 0;
+          uiCfg.curTempType = 0;
+        }
+        disp_temp_type();
+      }
+      break;
+    case ID_P_STEP:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        switch (uiCfg.stepHeat) {
+          case  1: uiCfg.stepHeat =  5; break;
+          case  5: uiCfg.stepHeat = 10; break;
+          case 10: uiCfg.stepHeat =  1; break;
+          default: break;
+        }
+        disp_step_heat();
+      }
+      break;
+    case ID_P_OFF:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (uiCfg.curTempType == 0) {
+          thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = (float)0;
+          thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
+        }
+        #if HAS_HEATED_BED
+        else {
+          thermalManager.temp_bed.target = (float)0;
+          thermalManager.start_watching_bed();
+        }
+        #endif
+        disp_desire_temp();
+      }
+      break;
+    case ID_P_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        clear_cur_ui();
+        draw_return_ui();
+      }
+      break;
+  }
+}
+
+void lv_draw_preHeat(void) {
+  lv_obj_t *buttonAdd, *buttonDec;
+  lv_obj_t *buttonOff, *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != PRE_HEAT_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = PRE_HEAT_UI;
+  }
+  disp_state = PRE_HEAT_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonAdd = lv_imgbtn_create(scr, NULL);
+  buttonDec = lv_imgbtn_create(scr, NULL);
+  buttoType = lv_imgbtn_create(scr, NULL);
+  buttonStep = lv_imgbtn_create(scr, NULL);
+  buttonOff = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonAdd, event_handler, ID_P_ADD, "bmp_Add.bin", 0);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonAdd, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonAdd, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonAdd, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonDec, event_handler, ID_P_DEC, "bmp_Dec.bin", 0);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonDec, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonDec, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+
+    lv_imgbtn_set_src(buttoType, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttoType, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttoType, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttoType, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+
+    lv_imgbtn_set_src(buttonStep, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonStep, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonStep, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonStep, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonOff, event_handler, ID_P_OFF, "bmp_Speed0.bin", 0);
+    lv_imgbtn_set_src(buttonOff, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonOff, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonOff, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonOff, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_P_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonAdd, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonDec, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttoType, INTERVAL_V,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonStep, BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonOff, BTN_X_PIXEL * 2 + INTERVAL_V * 3,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonAdd, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonDec, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttoType, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonStep, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonOff, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * labelAdd = lv_label_create(buttonAdd, NULL);
+  lv_obj_t * labelDec = lv_label_create(buttonDec, NULL);
+  labelType = lv_label_create(buttoType, NULL);
+  labelStep = lv_label_create(buttonStep, NULL);
+  lv_obj_t * labelOff = lv_label_create(buttonOff, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelAdd, preheat_menu.add);
+    lv_obj_align(labelAdd, buttonAdd, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelDec, preheat_menu.dec);
+    lv_obj_align(labelDec, buttonDec, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelOff, preheat_menu.off);
+    lv_obj_align(labelOff, buttonOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+
+  disp_temp_type();
+  disp_step_heat();
+
+  tempText1 = lv_label_create(scr, NULL);
+  lv_obj_set_style(tempText1, &tft_style_lable_rel);
+  disp_desire_temp();
+}
+
+void disp_temp_type() {
+
+  if (uiCfg.curTempType == 0) {
+    if (uiCfg.curSprayerChoose == 1) {
+      lv_obj_set_event_cb_mks(buttoType, event_handler, ID_P_TYPE, "bmp_Extru2.bin", 0);
+      if (gCfgItems.multiple_language != 0) {
+        lv_label_set_text(labelType, preheat_menu.ext2);
+        lv_obj_align(labelType, buttoType, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+      }
+    }
+    else {
+      lv_obj_set_event_cb_mks(buttoType, event_handler, ID_P_TYPE, "bmp_Extru1.bin", 0);
+      if (gCfgItems.multiple_language != 0) {
+        lv_label_set_text(labelType, preheat_menu.ext1);
+        lv_obj_align(labelType, buttoType, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+      }
+    }
+
+  }
+  else {
+    lv_obj_set_event_cb_mks(buttoType, event_handler, ID_P_TYPE, "bmp_Bed.bin", 0);
+    if (gCfgItems.multiple_language != 0) {
+      lv_label_set_text(labelType, preheat_menu.hotbed);
+      lv_obj_align(labelType, buttoType, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+
+}
+
+void disp_desire_temp() {
+  char buf[20] = {0};
+
+  public_buf_l[0] = '\0';
+
+  if (uiCfg.curTempType == 0) {
+    if (uiCfg.curSprayerChoose < 1)
+      strcat(public_buf_l, preheat_menu.ext1);
+    else
+      strcat(public_buf_l, preheat_menu.ext2);
+    sprintf(buf, preheat_menu.value_state, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius,  (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target);
+  }
+  #if HAS_HEATED_BED
+  else {
+    strcat(public_buf_l, preheat_menu.hotbed);
+    sprintf(buf, preheat_menu.value_state, (int)thermalManager.temp_bed.celsius,  (int)thermalManager.temp_bed.target);
+  }
+  #endif
+  strcat(public_buf_l, ": ");
+  strcat(public_buf_l, buf);
+  lv_label_set_text(tempText1, public_buf_l);
+  lv_obj_align(tempText1, NULL, LV_ALIGN_CENTER, 0, -50);
+}
+
+void disp_step_heat() {
+  if (uiCfg.stepHeat == 1)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_P_STEP, "bmp_Step1_degree.bin", 0);
+  else if (uiCfg.stepHeat == 5)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_P_STEP, "bmp_Step5_degree.bin", 0);
+  else if (uiCfg.stepHeat == 10)
+    lv_obj_set_event_cb_mks(buttonStep, event_handler, ID_P_STEP, "bmp_Step10_degree.bin", 0);
+
+  if (gCfgItems.multiple_language != 0) {
+    if (uiCfg.stepHeat == 1) {
+      lv_label_set_text(labelStep, preheat_menu.step_1c);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if (uiCfg.stepHeat == 5) {
+      lv_label_set_text(labelStep, preheat_menu.step_5c);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    else if (uiCfg.stepHeat == 10) {
+      lv_label_set_text(labelStep, preheat_menu.step_10c);
+      lv_obj_align(labelStep, buttonStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  }
+}
+
+void lv_clear_preHeat() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_preHeat.h

@@ -0,0 +1,37 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_preHeat(void);
+extern void lv_clear_preHeat();
+extern void disp_temp_type();
+extern void disp_step_heat();
+extern void disp_desire_temp();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp

@@ -0,0 +1,595 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+#include "lv_conf.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+#include "draw_ui.h"
+#include "../../../../sd/cardreader.h"
+
+static lv_obj_t * scr;
+
+static lv_obj_t *buttonPageUp, *buttonPageDown, *buttonBack, *buttonGcode[FILE_BTN_CNT];
+static lv_obj_t * labelPageUp[FILE_BTN_CNT];
+static lv_obj_t *buttonText[FILE_BTN_CNT];
+
+#define ID_P_UP     7
+#define ID_P_DOWN   8
+#define ID_P_RETURN 9
+
+int8_t curDirLever = 0;
+LIST_FILE list_file;
+DIR_OFFSET dir_offset[10];
+
+extern uint8_t public_buf[512];
+extern char public_buf_m[100];
+
+uint8_t sel_id = 0;
+
+#if ENABLED(SDSUPPORT)
+
+static uint8_t search_file() {
+  int valid_name_cnt = 0;
+  //char tmp[SHORT_NEME_LEN*MAX_DIR_LEVEL+1];
+
+  list_file.Sd_file_cnt = 0;
+  //list_file.Sd_file_offset = dir_offset[curDirLever].cur_page_first_offset;
+
+  //root2.rewind();
+  //SERIAL_ECHOLN(list_file.curDirPath);
+
+  if (curDirLever != 0) card.cd(list_file.curDirPath);
+  else card.cdroot(); //while(card.cdup());
+
+  const uint16_t fileCnt = card.get_num_Files();
+
+  for (uint16_t i = 0; i < fileCnt; i++) {
+    if (list_file.Sd_file_cnt == list_file.Sd_file_offset) {
+      const uint16_t nr = SD_ORDER(i, fileCnt);
+      card.getfilename_sorted(nr);
+
+      if (card.flag.filenameIsDir)
+        /*
+          SERIAL_ECHOLN(card.longest_filename);
+        */
+        list_file.IsFolder[valid_name_cnt] = 1;
+      else
+        //SERIAL_ECHOLN(card.longFilename);
+        list_file.IsFolder[valid_name_cnt] = 0;
+
+      #if 1
+        //
+        memset(list_file.file_name[valid_name_cnt], 0, strlen(list_file.file_name[valid_name_cnt]));
+        strcpy(list_file.file_name[valid_name_cnt], list_file.curDirPath);
+        strcat(list_file.file_name[valid_name_cnt], "/");
+        strcat(list_file.file_name[valid_name_cnt], card.filename);
+        //
+        memset(list_file.long_name[valid_name_cnt], 0, strlen(list_file.long_name[valid_name_cnt]));
+        if (card.longFilename[0] == 0)
+          strncpy(list_file.long_name[valid_name_cnt], card.filename, strlen(card.filename));
+        else
+          strncpy(list_file.long_name[valid_name_cnt], card.longFilename, strlen(card.longFilename));
+
+        valid_name_cnt++;
+        if (valid_name_cnt == 1)
+          dir_offset[curDirLever].cur_page_first_offset = list_file.Sd_file_offset;
+        if (valid_name_cnt >= FILE_NUM) {
+          dir_offset[curDirLever].cur_page_last_offset = list_file.Sd_file_offset;
+          list_file.Sd_file_offset++;
+          break;
+        }
+        list_file.Sd_file_offset++;
+      #endif
+    }
+    list_file.Sd_file_cnt++;
+  }
+  //card.closefile(false);
+  return valid_name_cnt;
+}
+
+#endif // SDSUPPORT
+
+uint8_t have_pre_pic(char *path) {
+  #if ENABLED(SDSUPPORT)
+    char *ps1, *ps2, *cur_name = strrchr(path, '/');
+
+    card.openFileRead(cur_name);
+    card.read(public_buf, 512);
+    ps1 = strstr((char *)public_buf, ";simage:");
+    card.read(public_buf, 512);
+    ps2 = strstr((char *)public_buf, ";simage:");
+    if (ps1 || ps2) {
+      card.closefile();
+      return 1;
+    }
+    card.closefile();
+  #endif
+
+  return 0;
+}
+
+LV_IMG_DECLARE(bmp_pic_117x92);
+LV_IMG_DECLARE(bmp_pic_100x100);
+LV_IMG_DECLARE(bmp_pic);
+LV_IMG_DECLARE(bmp_pic_100x40);
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  uint8_t i, file_count = 0;
+  //switch (obj->mks_obj_id)
+  //{
+  if (obj->mks_obj_id == ID_P_UP) {
+    if (event == LV_EVENT_CLICKED) {
+    }
+    else if (event == LV_EVENT_RELEASED) {
+      if (dir_offset[curDirLever].curPage > 0) {
+        //2015.05.19
+        list_file.Sd_file_cnt = 0;
+
+        if (dir_offset[curDirLever].cur_page_first_offset >= FILE_NUM)
+          list_file.Sd_file_offset = dir_offset[curDirLever].cur_page_first_offset - FILE_NUM;
+
+        #if ENABLED(SDSUPPORT)
+          file_count = search_file();
+        #endif
+        if (file_count != 0) {
+          dir_offset[curDirLever].curPage--;
+          lv_obj_del(scr);
+          disp_gcode_icon(file_count);
+        }
+      }
+    }
+  }
+  else if (obj->mks_obj_id == ID_P_DOWN) {
+    if (event == LV_EVENT_CLICKED) {
+    }
+    else if (event == LV_EVENT_RELEASED) {
+      if (dir_offset[curDirLever].cur_page_last_offset > 0) {
+        list_file.Sd_file_cnt = 0;
+        list_file.Sd_file_offset = dir_offset[curDirLever].cur_page_last_offset + 1;
+        #if ENABLED(SDSUPPORT)
+          file_count = search_file();
+        #endif
+        if (file_count != 0) {
+          dir_offset[curDirLever].curPage++;
+          lv_obj_del(scr);
+          disp_gcode_icon(file_count);
+        }
+        if (file_count < FILE_NUM)
+          dir_offset[curDirLever].cur_page_last_offset = 0;
+      }
+    }
+  }
+  else if (obj->mks_obj_id == ID_P_RETURN) {
+    if (event == LV_EVENT_CLICKED) {
+    }
+    else if (event == LV_EVENT_RELEASED) {
+      if (curDirLever > 0) {
+        int8_t *ch = (int8_t *)strrchr(list_file.curDirPath, '/');
+        if (ch) {
+          *ch = 0;
+          #if ENABLED(SDSUPPORT)
+            card.cdup();
+          #endif
+          dir_offset[curDirLever].curPage = 0;
+          dir_offset[curDirLever].cur_page_first_offset = 0;
+          dir_offset[curDirLever].cur_page_last_offset = 0;
+          curDirLever--;
+          list_file.Sd_file_offset = dir_offset[curDirLever].cur_page_first_offset;
+          #if ENABLED(SDSUPPORT)
+            file_count = search_file();
+          #endif
+          lv_obj_del(scr);
+          disp_gcode_icon(file_count);
+        }
+      }
+      else {
+        lv_obj_del(scr);
+        lv_draw_ready_print();
+      }
+    }
+  }
+  else {
+    for (i = 0; i < FILE_BTN_CNT; i++) {
+      if (obj->mks_obj_id == (i + 1)) {
+        if (event == LV_EVENT_CLICKED) {
+        }
+        else if (event == LV_EVENT_RELEASED) {
+          if (list_file.file_name[i][0] != 0) {
+            if (list_file.IsFolder[i] == 1) {
+              memset(list_file.curDirPath, 0, sizeof(list_file.curDirPath));
+              strcpy(list_file.curDirPath,  list_file.file_name[i]);
+              curDirLever++;
+              list_file.Sd_file_offset = dir_offset[curDirLever].cur_page_first_offset;
+              #if ENABLED(SDSUPPORT)
+                file_count = search_file();
+              #endif
+              lv_obj_del(scr);
+              disp_gcode_icon(file_count);
+            }
+            else {
+              sel_id = i;
+              lv_obj_del(scr);
+              lv_draw_dialog(DIALOG_TYPE_PRINT_FILE);
+            }
+            break;
+          }
+        }
+      }
+    }
+  }
+}
+
+void lv_draw_print_file(void) {
+  //uint8_t i;
+  uint8_t file_count;
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != PRINT_FILE_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = PRINT_FILE_UI;
+  }
+  disp_state = PRINT_FILE_UI;
+
+  curDirLever = 0;
+  dir_offset[curDirLever].curPage = 0;
+
+  list_file.Sd_file_offset = 0;
+  list_file.Sd_file_cnt = 0;
+
+  ZERO(dir_offset);
+  ZERO(list_file.IsFolder);
+  ZERO(list_file.curDirPath);
+
+  list_file.Sd_file_offset = dir_offset[curDirLever].cur_page_first_offset;
+  #if ENABLED(SDSUPPORT)
+    card.mount();
+    file_count = search_file();
+  #endif
+  disp_gcode_icon(file_count);
+
+  //lv_obj_t * labelPageUp = lv_label_create(buttonPageUp, NULL);
+  //lv_obj_t * labelPageDown = lv_label_create(buttonPageDown, NULL);
+  //lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+  /*
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelPageUp, tool_menu.preheat);
+    lv_obj_align(labelPageUp, buttonPageUp, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelPageDown, tool_menu.extrude);
+    lv_obj_align(labelPageDown, buttonPageDown, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+  }
+  */
+}
+
+void disp_gcode_icon(uint8_t file_num) {
+  uint8_t i;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  //static lv_style_t tool_style;
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  buttonPageUp = lv_imgbtn_create(scr, NULL);
+  buttonPageDown = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonPageUp, event_handler, ID_P_UP, "bmp_pageUp.bin", 0);
+  lv_imgbtn_set_src(buttonPageUp, LV_BTN_STATE_REL, &bmp_pic_117x92);
+  lv_imgbtn_set_src(buttonPageUp, LV_BTN_STATE_PR, &bmp_pic_117x92);
+  lv_imgbtn_set_style(buttonPageUp, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonPageUp, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonPageUp, LV_PROTECT_FOLLOW);
+
+  #if 1
+    lv_obj_set_event_cb_mks(buttonPageDown, event_handler, ID_P_DOWN, "bmp_pageDown.bin", 0);
+    lv_imgbtn_set_src(buttonPageDown, LV_BTN_STATE_REL, &bmp_pic_117x92);
+    lv_imgbtn_set_src(buttonPageDown, LV_BTN_STATE_PR, &bmp_pic_117x92);
+    lv_imgbtn_set_style(buttonPageDown, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonPageDown, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_P_RETURN, "bmp_Back.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic_117x92);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic_117x92);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonPageUp, OTHER_BTN_XPIEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonPageDown, OTHER_BTN_XPIEL * 3 + INTERVAL_V * 4, titleHeight + OTHER_BTN_YPIEL + INTERVAL_H);
+  lv_obj_set_pos(buttonBack, OTHER_BTN_XPIEL * 3 + INTERVAL_V * 4, titleHeight + OTHER_BTN_YPIEL * 2 + INTERVAL_H * 2);
+
+  /*Create a label on the Image button*/
+
+  lv_btn_set_layout(buttonPageUp, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonPageDown, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  for (i = 0; i < FILE_BTN_CNT; i++) {
+    /*
+    if(seq) {
+      j = (FILE_BTN_CNT-1) - i;
+      back_flg = 1;
+    }
+    else {
+      j = i;
+      back_flg = 0;
+    }
+    */
+    if (i >= file_num) break;
+
+    #ifdef TFT35
+      buttonGcode[i] = lv_imgbtn_create(scr, NULL);
+
+      lv_imgbtn_set_style(buttonGcode[i], LV_BTN_STATE_PR, &tft_style_lable_pre);
+      lv_imgbtn_set_style(buttonGcode[i], LV_BTN_STATE_REL, &tft_style_lable_rel);
+      lv_obj_clear_protect(buttonGcode[i], LV_PROTECT_FOLLOW);
+      lv_btn_set_layout(buttonGcode[i], LV_LAYOUT_OFF);
+
+      ZERO(public_buf_m);
+      cutFileName((char *)list_file.long_name[i], 16, 8,  (char *)public_buf_m);
+
+      if (list_file.IsFolder[i] == 1) {
+        lv_obj_set_event_cb_mks(buttonGcode[i], event_handler, (i + 1), "bmp_Dir.bin", 0);
+        lv_imgbtn_set_src(buttonGcode[i], LV_BTN_STATE_REL, &bmp_pic);
+        lv_imgbtn_set_src(buttonGcode[i], LV_BTN_STATE_PR, &bmp_pic);
+        if (i < 3)
+          lv_obj_set_pos(buttonGcode[i], BTN_X_PIXEL * i + INTERVAL_V * (i + 1), titleHeight);
+        else
+          lv_obj_set_pos(buttonGcode[i], BTN_X_PIXEL * (i - 3) + INTERVAL_V * ((i - 3) + 1), BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+        labelPageUp[i] = lv_label_create(buttonGcode[i], NULL);
+        lv_obj_set_style(labelPageUp[i], &tft_style_lable_rel);
+        lv_label_set_text(labelPageUp[i], public_buf_m);
+        lv_obj_align(labelPageUp[i], buttonGcode[i], LV_ALIGN_IN_BOTTOM_MID, 0, -5);
+      }
+      else {
+        if (have_pre_pic((char *)list_file.file_name[i])) {
+          lv_obj_set_event_cb_mks(buttonGcode[i], event_handler, (i + 1), list_file.file_name[i], 1);
+          lv_imgbtn_set_src(buttonGcode[i], LV_BTN_STATE_REL, &bmp_pic_100x100);
+          lv_imgbtn_set_src(buttonGcode[i], LV_BTN_STATE_PR, &bmp_pic_100x100);
+          if (i < 3) {
+            lv_obj_set_pos(buttonGcode[i], BTN_X_PIXEL * i + INTERVAL_V * (i + 1) + FILE_PRE_PIC_X_OFFSET, titleHeight + FILE_PRE_PIC_Y_OFFSET);
+            buttonText[i] = lv_btn_create(scr, NULL);
+            //lv_obj_set_event_cb(buttonText[i], event_handler);
+
+            lv_btn_set_style(buttonText[i], LV_BTN_STATE_PR, &tft_style_lable_pre);
+            lv_btn_set_style(buttonText[i], LV_BTN_STATE_REL, &tft_style_lable_rel);
+            //lv_obj_set_style(buttonText[i], &tft_style_lable_pre);
+            //lv_obj_set_style(buttonText[i], &tft_style_lable_rel);
+            lv_obj_clear_protect(buttonText[i], LV_PROTECT_FOLLOW);
+            lv_btn_set_layout(buttonText[i], LV_LAYOUT_OFF);
+            //lv_obj_set_event_cb_mks(buttonText[i], event_handler,(i+10),NULL,0);
+            //lv_imgbtn_set_src(buttonText[i], LV_BTN_STATE_REL, &bmp_pic_100x40);
+            //lv_imgbtn_set_src(buttonText[i], LV_BTN_STATE_PR, &bmp_pic_100x40);
+            lv_obj_set_pos(buttonText[i], BTN_X_PIXEL * i + INTERVAL_V * (i + 1) + FILE_PRE_PIC_X_OFFSET, titleHeight + FILE_PRE_PIC_Y_OFFSET + 100);
+            lv_obj_set_size(buttonText[i], 100, 40);
+          }
+          else {
+            lv_obj_set_pos(buttonGcode[i], BTN_X_PIXEL * (i - 3) + INTERVAL_V * ((i - 3) + 1) + FILE_PRE_PIC_X_OFFSET, BTN_Y_PIXEL + INTERVAL_H + titleHeight + FILE_PRE_PIC_Y_OFFSET);
+            buttonText[i] = lv_btn_create(scr, NULL);
+            //lv_obj_set_event_cb(buttonText[i], event_handler);
+
+            lv_btn_set_style(buttonText[i], LV_BTN_STATE_PR, &tft_style_lable_pre);
+            lv_btn_set_style(buttonText[i], LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+            //lv_imgbtn_set_style(buttonText[i], LV_BTN_STATE_REL, &tft_style_lable_rel);
+            lv_obj_clear_protect(buttonText[i], LV_PROTECT_FOLLOW);
+            lv_btn_set_layout(buttonText[i], LV_LAYOUT_OFF);
+            //lv_obj_set_event_cb_mks(buttonText[i], event_handler,(i+10),NULL,0);
+            //lv_imgbtn_set_src(buttonText[i], LV_BTN_STATE_REL, &bmp_pic_100x40);
+            //lv_imgbtn_set_src(buttonText[i], LV_BTN_STATE_PR, &bmp_pic_100x40);
+            lv_obj_set_pos(buttonText[i], BTN_X_PIXEL * (i - 3) + INTERVAL_V * ((i - 3) + 1) + FILE_PRE_PIC_X_OFFSET, BTN_Y_PIXEL + INTERVAL_H + titleHeight + FILE_PRE_PIC_Y_OFFSET + 100);
+            lv_obj_set_size(buttonText[i], 100, 40);
+          }
+          labelPageUp[i] = lv_label_create(buttonText[i], NULL);
+          lv_obj_set_style(labelPageUp[i], &tft_style_lable_rel);
+          lv_label_set_text(labelPageUp[i], public_buf_m);
+          lv_obj_align(labelPageUp[i], buttonText[i], LV_ALIGN_IN_BOTTOM_MID, 0, 0);
+        }
+        else {
+          lv_obj_set_event_cb_mks(buttonGcode[i], event_handler, (i + 1), "bmp_File.bin", 0);
+          lv_imgbtn_set_src(buttonGcode[i], LV_BTN_STATE_REL, &bmp_pic);
+          lv_imgbtn_set_src(buttonGcode[i], LV_BTN_STATE_PR, &bmp_pic);
+          if (i < 3)
+            lv_obj_set_pos(buttonGcode[i], BTN_X_PIXEL * i + INTERVAL_V * (i + 1), titleHeight);
+          else
+            lv_obj_set_pos(buttonGcode[i], BTN_X_PIXEL * (i - 3) + INTERVAL_V * ((i - 3) + 1), BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+          labelPageUp[i] = lv_label_create(buttonGcode[i], NULL);
+          lv_obj_set_style(labelPageUp[i], &tft_style_lable_rel);
+          lv_label_set_text(labelPageUp[i], public_buf_m);
+          lv_obj_align(labelPageUp[i], buttonGcode[i], LV_ALIGN_IN_BOTTOM_MID, 0, -5);
+        }
+      }
+    #else // ifdef TFT35
+    #endif // ifdef TFT35
+  }
+}
+
+void lv_open_gcode_file(char *path) {
+  #if ENABLED(SDSUPPORT)
+    //uint32_t read;
+    uint32_t *ps4;
+    int pre_sread_cnt;
+    char *cur_name;
+
+    cur_name = strrchr(path, '/');
+
+    card.openFileRead(cur_name);
+    card.read(public_buf, 512);
+    ps4 = (uint32_t *)strstr((char *)public_buf, ";simage:");
+
+    if (ps4) {
+      pre_sread_cnt = (uint32_t)ps4 - (uint32_t)((uint32_t *)(&public_buf[0]));
+      card.setIndex(pre_sread_cnt + 8);
+    }
+  #endif
+}
+
+int ascii2dec_test(char *ascii) {
+  int result = 0;
+
+  if (ascii == 0) return 0;
+
+  if (*(ascii) >= '0' && *(ascii) <= '9')
+    result = *(ascii) - '0';
+  else if (*(ascii) >= 'a' && *(ascii) <= 'f')
+    result = *(ascii) - 'a' + 0x0a;
+  else if (*(ascii) >= 'A' && *(ascii) <= 'F')
+    result = *(ascii) - 'A' + 0x0a;
+  else
+    return 0;
+
+  return result;
+}
+
+void lv_gcode_file_read(uint8_t *data_buf) {
+  #if ENABLED(SDSUPPORT)
+    uint16_t i = 0, j = 0, k = 0;
+    //uint32_t read;
+    uint16_t row_1 = 0;
+    char temp_test[200];
+
+    while (1) {
+      card.read(temp_test, 200);
+      for (i = 0; i < 200;) {
+        public_buf[row_1 * 200 + 100 * k + j] = (char)(ascii2dec_test(&temp_test[i]) << 4 | ascii2dec_test(&temp_test[i + 1]));
+        j++;
+        i += 2;
+      }
+      k++;
+      j = 0;
+      if (k >= 2) {
+        k = 0;
+        card.read(temp_test, 9);
+        break;
+      }
+    }
+    memcpy(data_buf, public_buf, 200);
+  #endif
+}
+
+void lv_close_gcode_file() {TERN_(SDSUPPORT, card.closefile());}
+
+void cutFileName(char *path, int len, int bytePerLine,  char *outStr) {
+  #if _LFN_UNICODE
+    TCHAR *tmpFile;
+    TCHAR *strIndex1 = 0, *strIndex2 = 0, *beginIndex;
+    TCHAR secSeg[10] = {0};
+    TCHAR gFileTail[4] = {'~', '.', 'g', '\0'};
+  #else
+    char *tmpFile;
+    char *strIndex1 = 0, *strIndex2 = 0, *beginIndex;
+    char secSeg[10] = {0};
+  #endif
+
+  if (path == 0 || len <= 3 || outStr == 0) return;
+
+  tmpFile = path;
+  #if _LFN_UNICODE
+    strIndex1 = (WCHAR *)wcsstr((const WCHAR *)tmpFile, (const WCHAR *)'/');
+    strIndex2 = (WCHAR *)wcsstr((const WCHAR *)tmpFile, (const WCHAR *)'.');
+  #else
+    strIndex1 = (char *)strrchr(tmpFile, '/');
+    strIndex2 = (char *)strrchr(tmpFile, '.');
+  #endif
+
+  beginIndex = (strIndex1 != 0
+                // && (strIndex2 != 0) && (strIndex1 < strIndex2)
+                ) ? strIndex1 + 1 : tmpFile;
+
+  if (strIndex2 == 0 || (strIndex1 > strIndex2)) { // not gcode file
+    #if _LFN_UNICODE
+      if (wcslen(beginIndex) > len)
+        wcsncpy(outStr, beginIndex, len);
+      else
+        wcscpy(outStr, beginIndex);
+    #else
+      if ((int)strlen(beginIndex) > len)
+        strncpy(outStr, beginIndex, len);
+      else
+        strcpy(outStr, beginIndex);
+    #endif
+  }
+  else { //gcode file
+    if (strIndex2 - beginIndex > (len - 2)) {
+      #if _LFN_UNICODE
+        wcsncpy(outStr, (const WCHAR *)beginIndex, len - 3);
+        wcscat(outStr, (const WCHAR *)gFileTail);
+      #else
+        //strncpy(outStr, beginIndex, len - 3);
+        strncpy(outStr, beginIndex, len - 4);
+        strcat(outStr, "~.g");
+      #endif
+    }
+    else {
+      #if _LFN_UNICODE
+        wcsncpy(outStr, (const WCHAR *)beginIndex, strIndex2 - beginIndex + 1);
+        wcscat(outStr, (const WCHAR *)&gFileTail[3]);
+      #else
+        strncpy(outStr, beginIndex, strIndex2 - beginIndex + 1);
+        strcat(outStr, "g");
+      #endif
+    }
+  }
+
+  #if _LFN_UNICODE
+    if (wcslen(outStr) > bytePerLine) {
+      wcscpy(secSeg, (const WCHAR *)&outStr[bytePerLine]);
+      outStr[bytePerLine] = '\n';
+      outStr[bytePerLine + 1] = '\0';
+      wcscat(outStr, (const WCHAR *)secSeg);
+    }
+  #else
+    if ((int)strlen(outStr) > bytePerLine) {
+      strcpy(secSeg, &outStr[bytePerLine]);
+      outStr[bytePerLine] = '\n';
+      outStr[bytePerLine + 1] = '\0';
+      strcat(outStr, secSeg);
+    }
+    else {
+      strcat(outStr, "\n");
+    }
+  #endif
+}
+
+void lv_clear_print_file() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.h

@@ -0,0 +1,65 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+typedef struct {
+  int cur_page_first_offset;
+  int cur_page_last_offset;
+  int curPage;
+} DIR_OFFSET;
+extern DIR_OFFSET dir_offset[10];
+
+#define FILE_NUM 6
+#define SHORT_NEME_LEN 13
+#define NAME_CUT_LEN 23
+
+#define MAX_DIR_LEVEL  10
+
+typedef struct {
+  //char longName[FILE_NUM][LONG_FILENAME_LENGTH];
+  char file_name[FILE_NUM][SHORT_NEME_LEN * MAX_DIR_LEVEL + 1];
+  char curDirPath[SHORT_NEME_LEN * MAX_DIR_LEVEL + 1];
+  char long_name[FILE_NUM][SHORT_NEME_LEN * 2 + 1];
+  char IsFolder[FILE_NUM];
+  char Sd_file_cnt;
+  char sd_file_index;
+  char Sd_file_offset;
+} LIST_FILE;
+extern LIST_FILE list_file;
+
+extern void disp_gcode_icon(uint8_t file_num);
+extern void lv_draw_print_file(void);
+extern void lv_open_gcode_file(char *path);
+extern void lv_gcode_file_read(uint8_t *data_buf);
+extern void lv_close_gcode_file();
+extern void cutFileName(char *path, int len, int bytePerLine,  char *outStr);
+extern int ascii2dec_test(char *ascii);
+extern void lv_clear_print_file();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp

@@ -0,0 +1,435 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../module/temperature.h"
+#include "../../../../module/motion.h"
+#include "../../../../sd/cardreader.h"
+#include "../../../../gcode/queue.h"
+
+#if ENABLED(POWER_LOSS_RECOVERY)
+  #include "../../../../feature/powerloss.h"
+#endif
+
+static lv_obj_t * scr;
+static lv_obj_t * labelExt1, * labelExt2, * labelFan, * labelZpos, * labelTime;
+static lv_obj_t * labelPause, * labelStop, * labelOperat;
+static lv_obj_t * bar1;
+static lv_obj_t * buttonPause, *buttonOperat, *buttonStop;
+
+#if HAS_HEATED_BED
+  static lv_obj_t* labelBed;
+#endif
+
+#define ID_PAUSE    1
+#define ID_STOP   2
+#define ID_OPTION 3
+
+lv_style_t lv_bar_style_indic;
+
+uint8_t once_flag = 0;
+extern uint32_t To_pre_view;
+extern uint8_t flash_preview_begin;
+extern uint8_t default_preview_flg;
+extern uint8_t gcode_preview_over;
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_PAUSE:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (gcode_preview_over != 1) {
+          if (uiCfg.print_state == WORKING) {
+            //#if ENABLED(PARK_HEAD_ON_PAUSE)
+            //queue.inject_P(PSTR("M25 P\nM24"));
+            #if ENABLED(SDSUPPORT)
+              //queue.inject_P(PSTR("M25\nG91\nG1 Z10\nG90"));
+              card.pauseSDPrint();
+              stop_print_time();
+              uiCfg.print_state = PAUSING;
+            #endif
+            lv_obj_set_event_cb_mks(buttonPause, event_handler, ID_PAUSE, "bmp_Pause.bin", 0);
+            lv_label_set_text(labelPause, printing_menu.resume);
+            lv_obj_align(labelPause, buttonPause, LV_ALIGN_CENTER, 30, 0);
+          }
+          else if (uiCfg.print_state == PAUSED) {
+            uiCfg.print_state = RESUMING;
+            //if (IS_SD_PAUSED())queue.inject_P(PSTR("M24"));// queue.inject_P(M24_STR);
+            lv_obj_set_event_cb_mks(obj, event_handler, ID_PAUSE, "bmp_Resume.bin", 0);
+            lv_label_set_text(labelPause, printing_menu.pause);
+            lv_obj_align(labelPause, buttonPause, LV_ALIGN_CENTER, 30, 0);
+          }
+          #if ENABLED(POWER_LOSS_RECOVERY)
+          else if (uiCfg.print_state == REPRINTING) {
+            uiCfg.print_state = REPRINTED;
+            lv_obj_set_event_cb_mks(obj, event_handler, ID_PAUSE, "bmp_Resume.bin", 0);
+            lv_label_set_text(labelPause, printing_menu.pause);
+            lv_obj_align(labelPause, buttonPause, LV_ALIGN_CENTER, 30, 0);
+            //recovery.resume();
+            print_time.minutes = recovery.info.print_job_elapsed / 60;
+            print_time.seconds = recovery.info.print_job_elapsed % 60;
+            print_time.hours = print_time.minutes / 60;
+          }
+          #endif
+        }
+      }
+      break;
+
+    case ID_STOP:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (gcode_preview_over != 1) {
+          lv_obj_del(scr);
+          lv_draw_dialog(DIALOG_TYPE_STOP);
+        }
+      }
+      break;
+    case ID_OPTION:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        if (gcode_preview_over != 1) {
+          lv_obj_del(scr);
+          lv_draw_opration();
+        }
+      }
+      break;
+  }
+}
+
+void lv_draw_printing(void) {
+  lv_obj_t *buttonExt1, *buttonExt2, *buttonFanstate, *buttonZpos, *buttonTime;
+  TERN_(HAS_HEATED_BED, lv_obj_t * buttonBedstate);
+
+  disp_state_stack._disp_index = 0;
+  ZERO(disp_state_stack._disp_state);
+  disp_state_stack._disp_state[disp_state_stack._disp_index] = PRINTING_UI;
+
+  disp_state = PRINTING_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  //static lv_style_t tool_style;
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic_150x80);
+  LV_IMG_DECLARE(bmp_pic_45x45);
+
+  /*Create an Image button*/
+  buttonExt1 = lv_imgbtn_create(scr, NULL);
+  if (EXTRUDERS == 2)
+    buttonExt2 = lv_imgbtn_create(scr, NULL);
+
+  #if HAS_HEATED_BED
+    buttonBedstate = lv_imgbtn_create(scr, NULL);
+  #endif
+
+  buttonFanstate = lv_imgbtn_create(scr, NULL);
+  buttonZpos = lv_imgbtn_create(scr, NULL);
+  buttonPause = lv_imgbtn_create(scr, NULL);
+  buttonStop = lv_imgbtn_create(scr, NULL);
+  buttonOperat = lv_imgbtn_create(scr, NULL);
+  buttonTime = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonExt1, event_handler, 0, "bmp_Ext1_state.bin", 0);
+  lv_imgbtn_set_src(buttonExt1, LV_BTN_STATE_REL, &bmp_pic_45x45);
+  lv_imgbtn_set_src(buttonExt1, LV_BTN_STATE_PR, &bmp_pic_45x45);
+  lv_imgbtn_set_style(buttonExt1, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonExt1, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonExt1, LV_PROTECT_FOLLOW);
+  #if 1
+  if (EXTRUDERS == 2) {
+    lv_obj_set_event_cb_mks(buttonExt2, event_handler, 0, "bmp_Ext2_state.bin", 0);
+    lv_imgbtn_set_src(buttonExt2, LV_BTN_STATE_REL, &bmp_pic_45x45);
+    lv_imgbtn_set_src(buttonExt2, LV_BTN_STATE_PR, &bmp_pic_45x45);
+    lv_imgbtn_set_style(buttonExt2, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonExt2, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  }
+  #if HAS_HEATED_BED
+    lv_obj_set_event_cb_mks(buttonBedstate, event_handler, 0, "bmp_Bed_state.bin", 0);
+    lv_imgbtn_set_src(buttonBedstate, LV_BTN_STATE_REL, &bmp_pic_45x45);
+    lv_imgbtn_set_src(buttonBedstate, LV_BTN_STATE_PR, &bmp_pic_45x45);
+    lv_imgbtn_set_style(buttonBedstate, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBedstate, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_event_cb_mks(buttonFanstate, event_handler, 0, "bmp_Fan_state.bin", 0);
+  lv_imgbtn_set_src(buttonFanstate, LV_BTN_STATE_REL, &bmp_pic_45x45);
+  lv_imgbtn_set_src(buttonFanstate, LV_BTN_STATE_PR, &bmp_pic_45x45);
+  lv_imgbtn_set_style(buttonFanstate, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonFanstate, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+  lv_obj_set_event_cb_mks(buttonTime, event_handler, 0, "bmp_Time_state.bin", 0);
+  lv_imgbtn_set_src(buttonTime, LV_BTN_STATE_REL, &bmp_pic_45x45);
+  lv_imgbtn_set_src(buttonTime, LV_BTN_STATE_PR, &bmp_pic_45x45);
+  lv_imgbtn_set_style(buttonTime, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonTime, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+  lv_obj_set_event_cb_mks(buttonZpos, event_handler, 0, "bmp_Zpos_state.bin", 0);
+  lv_imgbtn_set_src(buttonZpos, LV_BTN_STATE_REL, &bmp_pic_45x45);
+  lv_imgbtn_set_src(buttonZpos, LV_BTN_STATE_PR, &bmp_pic_45x45);
+  lv_imgbtn_set_style(buttonZpos, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonZpos, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+  if (uiCfg.print_state == WORKING)
+    lv_obj_set_event_cb_mks(buttonPause, event_handler, ID_PAUSE, "bmp_Resume.bin", 0);
+  else
+    lv_obj_set_event_cb_mks(buttonPause, event_handler, ID_PAUSE, "bmp_Pause.bin", 0);
+
+  lv_imgbtn_set_src(buttonPause, LV_BTN_STATE_REL, &bmp_pic_150x80);
+  lv_imgbtn_set_src(buttonPause, LV_BTN_STATE_PR, &bmp_pic_150x80);
+  lv_imgbtn_set_style(buttonPause, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonPause, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+  lv_obj_set_event_cb_mks(buttonStop, event_handler, ID_STOP, "bmp_Stop.bin", 0);
+  lv_imgbtn_set_src(buttonStop, LV_BTN_STATE_REL, &bmp_pic_150x80);
+  lv_imgbtn_set_src(buttonStop, LV_BTN_STATE_PR, &bmp_pic_150x80);
+  lv_imgbtn_set_style(buttonStop, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonStop, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+  lv_obj_set_event_cb_mks(buttonOperat, event_handler, ID_OPTION, "bmp_Operate.bin", 0);
+  lv_imgbtn_set_src(buttonOperat, LV_BTN_STATE_REL, &bmp_pic_150x80);
+  lv_imgbtn_set_src(buttonOperat, LV_BTN_STATE_PR, &bmp_pic_150x80);
+  lv_imgbtn_set_style(buttonOperat, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonOperat, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonExt1, 205, 136);
+  if (EXTRUDERS == 2)
+    lv_obj_set_pos(buttonExt2, 350, 136);
+
+  #if HAS_HEATED_BED
+    lv_obj_set_pos(buttonBedstate, 205, 186);
+  #endif
+
+  lv_obj_set_pos(buttonFanstate, 350, 186);
+  lv_obj_set_pos(buttonTime, 205, 86);
+  lv_obj_set_pos(buttonZpos, 350, 86);
+  lv_obj_set_pos(buttonPause, 5, 240);
+  lv_obj_set_pos(buttonStop, 165, 240);
+  lv_obj_set_pos(buttonOperat, 325, 240);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonExt1, LV_LAYOUT_OFF);
+  if (EXTRUDERS == 2)
+    lv_btn_set_layout(buttonExt2, LV_LAYOUT_OFF);
+
+  #if HAS_HEATED_BED
+    lv_btn_set_layout(buttonBedstate, LV_LAYOUT_OFF);
+  #endif
+
+  lv_btn_set_layout(buttonFanstate, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonZpos, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonPause, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonStop, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonOperat, LV_LAYOUT_OFF);
+
+  labelExt1 = lv_label_create(scr, NULL);
+  lv_obj_set_style(labelExt1, &tft_style_lable_rel);
+  lv_obj_set_pos(labelExt1, 250, 146);
+
+  if (EXTRUDERS == 2) {
+    labelExt2 = lv_label_create(scr, NULL);
+    lv_obj_set_style(labelExt2, &tft_style_lable_rel);
+    lv_obj_set_pos(labelExt2, 395, 146);
+  }
+
+  #if HAS_HEATED_BED
+    labelBed = lv_label_create(scr, NULL);
+    lv_obj_set_style(labelBed, &tft_style_lable_rel);
+    lv_obj_set_pos(labelBed, 250, 196);
+  #endif
+
+  labelFan = lv_label_create(scr, NULL);
+  lv_obj_set_style(labelFan, &tft_style_lable_rel);
+  lv_obj_set_pos(labelFan, 395, 196);
+
+  labelZpos = lv_label_create(scr, NULL);
+  lv_obj_set_style(labelZpos, &tft_style_lable_rel);
+  lv_obj_set_pos(labelZpos, 395, 96);
+
+  labelTime = lv_label_create(scr, NULL);
+  lv_obj_set_style(labelTime, &tft_style_lable_rel);
+  lv_obj_set_pos(labelTime, 250, 96);
+
+  labelPause = lv_label_create(buttonPause, NULL);
+  labelStop = lv_label_create(buttonStop, NULL);
+  labelOperat = lv_label_create(buttonOperat, NULL);
+
+  if (gCfgItems.multiple_language != 0) {
+    if (uiCfg.print_state == WORKING)
+      lv_label_set_text(labelPause, printing_menu.pause);
+    else
+      lv_label_set_text(labelPause, printing_menu.resume);
+    lv_obj_align(labelPause, buttonPause, LV_ALIGN_CENTER, 30, 0);
+
+    lv_label_set_text(labelStop, printing_menu.stop);
+    lv_obj_align(labelStop, buttonStop, LV_ALIGN_CENTER, 30, 0);
+
+    lv_label_set_text(labelOperat, printing_menu.option);
+    lv_obj_align(labelOperat, buttonOperat, LV_ALIGN_CENTER, 30, 0);
+  }
+
+  lv_style_copy(&lv_bar_style_indic, &lv_style_pretty_color);
+  lv_bar_style_indic.text.color = lv_color_hex3(0xADF);
+  lv_bar_style_indic.image.color = lv_color_hex3(0xADF);
+  lv_bar_style_indic.line.color = lv_color_hex3(0xADF);
+  lv_bar_style_indic.body.main_color = lv_color_hex3(0xADF);
+  lv_bar_style_indic.body.grad_color = lv_color_hex3(0xADF);
+  lv_bar_style_indic.body.border.color = lv_color_hex3(0xADF);
+
+  bar1 = lv_bar_create(scr, NULL);
+  lv_obj_set_pos(bar1, 205, 36);
+  lv_obj_set_size(bar1, 270, 40);
+  lv_bar_set_style(bar1, LV_BAR_STYLE_INDIC, &lv_bar_style_indic);
+  lv_bar_set_anim_time(bar1, 1000);
+  lv_bar_set_value(bar1, 0, LV_ANIM_ON);
+
+  disp_ext_temp();
+  disp_bed_temp();
+  disp_fan_speed();
+  disp_print_time();
+  disp_fan_Zpos();
+}
+
+void disp_ext_temp() {
+  memset(public_buf_l, 0, sizeof(public_buf_l));
+  sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.temp_hotend[0].celsius, (int)thermalManager.temp_hotend[0].target);
+  lv_label_set_text(labelExt1, public_buf_l);
+
+  if (EXTRUDERS == 2) {
+    memset(public_buf_l, 0, sizeof(public_buf_l));
+    sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.temp_hotend[1].celsius, (int)thermalManager.temp_hotend[1].target);
+    lv_label_set_text(labelExt2, public_buf_l);
+  }
+}
+
+void disp_bed_temp() {
+  #if HAS_HEATED_BED
+    memset(public_buf_l, 0, sizeof(public_buf_l));
+    sprintf(public_buf_l, printing_menu.bed_temp, (int)thermalManager.temp_bed.celsius, (int)thermalManager.temp_bed.target);
+    lv_label_set_text(labelBed, public_buf_l);
+  #endif
+}
+
+void disp_fan_speed() {
+  memset(public_buf_l, 0, sizeof(public_buf_l));
+  sprintf(public_buf_l, "%3d", thermalManager.fan_speed[0]);
+  lv_label_set_text(labelFan, public_buf_l);
+}
+
+void disp_print_time() {
+  memset(public_buf_l, 0, sizeof(public_buf_l));
+  sprintf(public_buf_l, "%d%d:%d%d:%d%d", print_time.hours / 10, print_time.hours % 10, print_time.minutes / 10, print_time.minutes % 10, print_time.seconds / 10, print_time.seconds % 10);
+  lv_label_set_text(labelTime, public_buf_l);
+}
+
+void disp_fan_Zpos() {
+  memset(public_buf_l, 0, sizeof(public_buf_l));
+  sprintf(public_buf_l, "%.3f", current_position[Z_AXIS]);
+  lv_label_set_text(labelZpos, public_buf_l);
+}
+
+void reset_print_time() {
+  //print_time.days = 0;
+  print_time.hours = 0;
+  print_time.minutes = 0;
+  print_time.seconds = 0;
+  print_time.ms_10 = 0;
+  //print_time.start = 1;
+}
+
+void start_print_time() { print_time.start = 1; }
+
+void stop_print_time() { print_time.start = 0; }
+
+void setProBarRate() {
+  int rate;
+  volatile long long rate_tmp_r;
+
+  if (gCfgItems.from_flash_pic != 1) {
+    #if ENABLED(SDSUPPORT)
+      rate_tmp_r = (long long)card.getIndex() * 100;
+    #endif
+    rate = rate_tmp_r / gCfgItems.curFilesize;
+  }
+  else {
+    #if ENABLED(SDSUPPORT)
+      rate_tmp_r = (long long)card.getIndex();
+    #endif
+    rate = (rate_tmp_r - (PREVIEW_SIZE + To_pre_view)) * 100 / (gCfgItems.curFilesize - (PREVIEW_SIZE + To_pre_view));
+  }
+  //gCurFileState.totalSend = rate;
+
+  if (rate <= 0) return;
+
+  if (disp_state == PRINTING_UI) {
+    lv_bar_set_value(bar1, rate, LV_ANIM_ON);
+
+    if (marlin_state == MF_SD_COMPLETE) {
+      if (once_flag == 0) {
+        stop_print_time();
+
+        flash_preview_begin = 0;
+        default_preview_flg = 0;
+        lv_clear_printing();
+        lv_draw_dialog(DIALOG_TYPE_FINISH_PRINT);
+
+        once_flag = 1;
+
+        #if HAS_SUICIDE
+          if (gCfgItems.finish_power_off == 1)
+            suicide();
+        #endif
+      }
+    }
+  }
+}
+
+void lv_clear_printing() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_printing.h

@@ -0,0 +1,52 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+#define IDLE        0
+#define WORKING     1
+#define PAUSING     2
+#define PAUSED      3
+#define REPRINTING  4
+#define REPRINTED   5
+#define RESUMING    6
+#define STOP        7
+
+extern void lv_draw_printing(void);
+extern void lv_clear_printing();
+extern void disp_ext_temp();
+extern void disp_bed_temp();
+extern void disp_fan_speed();
+extern void disp_print_time();
+extern void disp_fan_Zpos();
+extern void reset_print_time();
+extern void start_print_time();
+extern void stop_print_time();
+extern void setProBarRate();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp

@@ -0,0 +1,319 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "draw_ready_print.h"
+#include "draw_tool.h"
+#include "lv_conf.h"
+#include "lvgl.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+#include "tft_lvgl_configuration.h"
+#include "mks_hardware_test.h"
+#include "draw_ui.h"
+
+#include <stdio.h>
+
+#include "../../../../MarlinCore.h"
+#include "../../../../module/temperature.h"
+
+//static lv_obj_t *buttonPrint,*buttonTool,*buttonSet;
+static lv_obj_t * scr;
+#if ENABLED(MKS_TEST)
+  uint8_t curent_disp_ui = 0;
+#endif
+
+#define ID_TOOL   1
+#define ID_SET    2
+#define ID_PRINT  3
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_TOOL:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        #if ENABLED(MKS_TEST)
+          curent_disp_ui = 2;
+        #endif
+        lv_obj_del(scr);
+        lv_draw_tool();
+      }
+      break;
+    case ID_SET:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_obj_del(scr);
+        lv_draw_set();
+      }
+      break;
+    case ID_PRINT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_obj_del(scr);
+        lv_draw_print_file();
+      }
+      break;
+  }
+}
+
+
+#if ENABLED(MKS_TEST)
+
+  lv_obj_t *limit_info, *det_info;
+  lv_style_t limit_style, det_style;
+  void disp_Limit_ok() {
+    limit_style.text.color.full = 0xFFFF;
+    lv_obj_set_style(limit_info, &limit_style);
+    lv_label_set_text(limit_info, "Limit:ok");
+  }
+  void disp_Limit_error() {
+    limit_style.text.color.full = 0xF800;
+    lv_obj_set_style(limit_info, &limit_style);
+    lv_label_set_text(limit_info, "Limit:error");
+  }
+
+  void disp_det_ok() {
+    det_style.text.color.full = 0xFFFF;
+    lv_obj_set_style(det_info, &det_style);
+    lv_label_set_text(det_info, "det:ok");
+  }
+  void disp_det_error() {
+    det_style.text.color.full = 0xF800;
+    lv_obj_set_style(det_info, &det_style);
+    lv_label_set_text(det_info, "det:error");
+  }
+
+  lv_obj_t *e1, *e2, *e3, *bed;
+  void disp_test() {
+    char buf[30] = {0};
+    //lv_obj_t * label_tool2 = lv_label_create(scr, NULL);
+    //lv_obj_set_pos(label_tool,20,50);
+    memset(buf, 0, sizeof(buf));
+    sprintf(buf, "e1:%d", (int)thermalManager.temp_hotend[0].celsius);
+    lv_label_set_text(e1, buf);
+
+    memset(buf, 0, sizeof(buf));
+    sprintf(buf, "e2:%d", (int)thermalManager.temp_hotend[1].celsius);
+    lv_label_set_text(e2, buf);
+
+    memset(buf, 0, sizeof(buf));
+    sprintf(buf, "e3:%d", (int)thermalManager.temp_hotend[2].celsius);
+    lv_label_set_text(e3, buf);
+
+    memset(buf, 0, sizeof(buf));
+    sprintf(buf, "bed:%d", (int)thermalManager.temp_bed.celsius);
+    lv_label_set_text(bed, buf);
+  }
+
+#endif // MKS_TEST
+
+void lv_draw_ready_print(void) {
+  #if ENABLED(MKS_TEST)
+    char buf[30] = {0};
+    lv_obj_t *buttonTool;
+
+    static lv_style_t style_pr, style_rel;
+
+    curent_disp_ui = 1;
+
+    scr = lv_obj_create(NULL, NULL);
+
+    static lv_style_t ready_style;
+
+    lv_style_copy(&ready_style, &lv_style_scr);
+    //ready_style.body.main_color.full = 0X18C3;
+    //ready_style.body.grad_color.full = 0X18C3;
+    ready_style.body.main_color.full = 0X0000;
+    ready_style.body.grad_color.full = 0X0000;
+    ready_style.text.color.full = 0Xffff;
+    lv_obj_set_style(scr, &ready_style);
+    lv_scr_load(scr);
+    lv_obj_clean(scr);
+    //lv_obj_set_hidden(scr,true);
+    lv_refr_now(lv_refr_get_disp_refreshing());
+
+    LV_IMG_DECLARE(bmp_pic);
+    //LV_IMG_DECLARE(bmp_pic2);
+    //LV_IMG_DECLARE(bmp_pic3);
+
+    //scr = lv_obj_create(NULL, NULL);
+    //lv_scr_load(scr);
+
+    /*Create an Image button*/
+    buttonTool = lv_imgbtn_create(scr, NULL);
+
+    //lv_btn_setting(&style_pr,0x5d8f16,0x5d8f16);
+    //lv_btn_setting(&style_rel,0x5d8f16,0x5d8f16);
+
+    lv_obj_set_event_cb_mks(buttonTool, event_handler, 3, "bmp_Tool.bin", 0);
+    //lv_imgbtn_set_src_mks(buttonTool, LV_BTN_STATE_REL, &bmp_pic,(uint8_t *)"bmp_tool.bin");
+    lv_imgbtn_set_src(buttonTool, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonTool, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonTool, LV_BTN_STATE_PR, &style_pr);
+    lv_imgbtn_set_style(buttonTool, LV_BTN_STATE_REL, &style_rel);
+
+    lv_obj_set_pos(buttonTool, 360, 180);
+
+    lv_btn_set_layout(buttonTool, LV_LAYOUT_OFF);
+
+    lv_obj_t * label_tool = lv_label_create(buttonTool, NULL);
+
+    lv_obj_set_pos(label_tool, 30, 100);
+    lv_label_set_text(label_tool, "Back");
+
+    e1 = lv_label_create(scr, NULL);
+    lv_obj_set_pos(e1, 20, 20);
+    sprintf(buf, "e1:  %d", (int)thermalManager.temp_hotend[0].celsius);
+    lv_label_set_text(e1, buf);
+
+    e2 = lv_label_create(scr, NULL);
+    lv_obj_set_pos(e2, 20, 45);
+    sprintf(buf, "e1:  %d", (int)thermalManager.temp_hotend[1].celsius);
+    lv_label_set_text(e2, buf);
+
+    e3 = lv_label_create(scr, NULL);
+    lv_obj_set_pos(e3, 20, 70);
+    sprintf(buf, "e1:  %d", (int)thermalManager.temp_hotend[2].celsius);
+    lv_label_set_text(e3, buf);
+
+    bed = lv_label_create(scr, NULL);
+    lv_obj_set_pos(bed, 20, 95);
+    sprintf(buf, "bed:  %d", (int)thermalManager.temp_bed.celsius);
+    lv_label_set_text(bed, buf);
+
+    limit_info = lv_label_create(scr, NULL);
+
+    lv_style_copy(&limit_style, &lv_style_scr);
+    limit_style.body.main_color.full = 0X0000;
+    limit_style.body.grad_color.full = 0X0000;
+    limit_style.text.color.full = 0Xffff;
+    lv_obj_set_style(limit_info, &limit_style);
+
+    lv_obj_set_pos(limit_info, 20, 120);
+    lv_label_set_text(limit_info, " ");
+
+    det_info = lv_label_create(scr, NULL);
+
+    lv_style_copy(&det_style, &lv_style_scr);
+    det_style.body.main_color.full = 0X0000;
+    det_style.body.grad_color.full = 0X0000;
+    det_style.text.color.full = 0Xffff;
+    lv_obj_set_style(det_info, &det_style);
+
+    lv_obj_set_pos(det_info, 20, 145);
+    lv_label_set_text(det_info, " ");
+  #else // !MKS_TEST
+    lv_obj_t *buttonPrint, *buttonTool, *buttonSet;
+
+    disp_state_stack._disp_index = 0;
+    memset(disp_state_stack._disp_state, 0, sizeof(disp_state_stack._disp_state));
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = PRINT_READY_UI;
+
+    disp_state = PRINT_READY_UI;
+
+    scr = lv_obj_create(NULL, NULL);
+
+    lv_obj_set_style(scr, &tft_style_scr);
+    lv_scr_load(scr);
+    lv_obj_clean(scr);
+    //lv_obj_set_hidden(scr,true);
+    lv_refr_now(lv_refr_get_disp_refreshing());
+
+    LV_IMG_DECLARE(bmp_pic);
+
+    //lv_obj_t * title = lv_label_create(scr, NULL);
+    //lv_obj_set_style(title, &tft_style_lable_rel);
+    //lv_obj_set_pos(title,TITLE_XPOS,TITLE_YPOS);
+    //lv_label_set_text(title, creat_title_text());
+
+    /*Create an Image button*/
+    buttonPrint = lv_imgbtn_create(scr, NULL);
+    buttonTool = lv_imgbtn_create(scr, NULL);
+    buttonSet = lv_imgbtn_create(scr, NULL);
+
+    lv_obj_set_event_cb_mks(buttonPrint, event_handler, ID_PRINT, "bmp_Print.bin", 0);
+    //lv_imgbtn_set_src_mks(buttonPrint, LV_BTN_STATE_REL, &bmp_pic,(uint8_t *)"bmp_printing.bin");
+    lv_imgbtn_set_src(buttonPrint, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonPrint, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonPrint, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonPrint, LV_BTN_STATE_REL, &tft_style_lable_rel);
+    lv_obj_clear_protect(buttonPrint, LV_PROTECT_FOLLOW);
+    #if 1
+      lv_obj_set_event_cb_mks(buttonSet, event_handler, ID_SET, "bmp_Set.bin", 0);
+      //lv_imgbtn_set_src_mks(buttonSet, LV_BTN_STATE_REL, &bmp_pic,(uint8_t *)"bmp_set.bin");
+      lv_imgbtn_set_src(buttonSet, LV_BTN_STATE_REL, &bmp_pic);
+      lv_imgbtn_set_src(buttonSet, LV_BTN_STATE_PR, &bmp_pic);
+      lv_imgbtn_set_style(buttonSet, LV_BTN_STATE_PR, &tft_style_lable_pre);
+      lv_imgbtn_set_style(buttonSet, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+      lv_obj_set_event_cb_mks(buttonTool, event_handler, ID_TOOL, "bmp_Tool.bin", 0);
+      //lv_imgbtn_set_src_mks(buttonTool, LV_BTN_STATE_REL, &bmp_pic,(uint8_t *)"bmp_tool.bin");
+      lv_imgbtn_set_src(buttonTool, LV_BTN_STATE_REL, &bmp_pic);
+      lv_imgbtn_set_src(buttonTool, LV_BTN_STATE_PR, &bmp_pic);
+      lv_imgbtn_set_style(buttonTool, LV_BTN_STATE_PR, &tft_style_lable_pre);
+      lv_imgbtn_set_style(buttonTool, LV_BTN_STATE_REL, &tft_style_lable_rel);
+    #endif
+    lv_obj_set_pos(buttonTool, 20, 90);
+    lv_obj_set_pos(buttonSet, 180, 90);
+    lv_obj_set_pos(buttonPrint, 340, 90);
+
+    //lv_obj_set_pos(buttonTool,SIMPLE_FIRST_PAGE_GRAP+1,(TFT_HEIGHT-BTN_Y_PIXEL)/2+2);
+    //lv_obj_set_pos(buttonSet,BTN_X_PIXEL+SIMPLE_FIRST_PAGE_GRAP*2+1,(TFT_HEIGHT-BTN_Y_PIXEL)/2+2);
+    //lv_obj_set_pos(buttonPrint,BTN_X_PIXEL*2+SIMPLE_FIRST_PAGE_GRAP*3+1,(TFT_HEIGHT-BTN_Y_PIXEL)/2+2);
+
+    /*Create a label on the Image button*/
+    lv_btn_set_layout(buttonPrint, LV_LAYOUT_OFF);
+    lv_btn_set_layout(buttonSet, LV_LAYOUT_OFF);
+    lv_btn_set_layout(buttonTool, LV_LAYOUT_OFF);
+
+    lv_obj_t * label_print = lv_label_create(buttonPrint, NULL);
+    lv_obj_t * label_set = lv_label_create(buttonSet, NULL);
+    lv_obj_t * label_tool = lv_label_create(buttonTool, NULL);
+    if (gCfgItems.multiple_language != 0) {
+
+      lv_label_set_text(label_print, main_menu.print);
+      lv_obj_align(label_print, buttonPrint, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+      lv_label_set_text(label_set, main_menu.set);
+      lv_obj_align(label_set, buttonSet, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+      //lv_label_set_style(label_tool,LV_BTN_STATE_PR,&tft_style_lable_pre);
+      //lv_label_set_style(label_tool,LV_BTN_STATE_REL,&tft_style_lable_rel);
+      lv_label_set_text(label_tool, main_menu.tool);
+      lv_obj_align(label_tool, buttonTool, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+  #endif // !MKS_TEST
+}
+
+void lv_clear_ready_print() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.h

@@ -0,0 +1,39 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_ready_print(void);
+extern void disp_test();
+extern void disp_Limit_ok();
+extern void disp_Limit_error();
+extern void disp_det_error();
+extern void disp_det_ok();
+extern void lv_clear_ready_print();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_set.cpp

@@ -0,0 +1,258 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+#include "draw_ready_print.h"
+#include "draw_set.h"
+#include "lv_conf.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+#include "draw_ui.h"
+#include "../../../../gcode/queue.h"
+
+static lv_obj_t * scr;
+
+#define ID_S_WIFI       1
+#define ID_S_FAN        2
+#define ID_S_ABOUT      3
+#define ID_S_CONTINUE   4
+#define ID_S_MOTOR_OFF  5
+#define ID_S_LANGUAGE   6
+#define ID_S_RETURN     7
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_S_WIFI:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+      }
+      break;
+    case ID_S_FAN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_obj_del(scr);
+        lv_draw_fan();
+      }
+      break;
+    case ID_S_ABOUT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_obj_del(scr);
+        lv_draw_about();
+      }
+      break;
+    case ID_S_CONTINUE:
+
+      break;
+    case ID_S_MOTOR_OFF:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        #if HAS_SUICIDE
+          suicide();
+        #else
+          queue.enqueue_one_now(PSTR("M84"));
+        #endif
+      }
+      break;
+    case ID_S_LANGUAGE:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_obj_del(scr);
+        lv_draw_language();
+      }
+      break;
+    case ID_S_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_obj_del(scr);
+        lv_draw_ready_print();
+      }
+      break;
+
+  }
+}
+
+void lv_draw_set(void) {
+  lv_obj_t *buttonFan, *buttonAbout;
+  lv_obj_t *buMotorOff, *buttonLanguage, *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != SET_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = SET_UI;
+  }
+  disp_state = SET_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  //static lv_style_t tool_style;
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  //buttonWifi = lv_imgbtn_create(scr, NULL);
+  buttonFan = lv_imgbtn_create(scr, NULL);
+  buttonAbout = lv_imgbtn_create(scr, NULL);
+  //buttonContinue = lv_imgbtn_create(scr, NULL);
+  buMotorOff = lv_imgbtn_create(scr, NULL);
+  buttonLanguage = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+
+  //lv_obj_set_event_cb_mks(buttonWifi, event_handler,ID_S_WIFI,"bmp_Wifi.bin",0);
+  //lv_imgbtn_set_src(buttonWifi, LV_BTN_STATE_REL, &bmp_pic);
+  //lv_imgbtn_set_src(buttonWifi, LV_BTN_STATE_PR, &bmp_pic);
+  //lv_imgbtn_set_style(buttonWifi, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  //lv_imgbtn_set_style(buttonWifi, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  //lv_obj_clear_protect(buttonWifi, LV_PROTECT_FOLLOW);
+  #if 1
+    lv_obj_set_event_cb_mks(buttonFan, event_handler, ID_S_FAN, "bmp_Fan.bin", 0);
+    lv_imgbtn_set_src(buttonFan, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonFan, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonFan, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonFan, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonAbout, event_handler, ID_S_ABOUT, "bmp_About.bin", 0);
+    lv_imgbtn_set_src(buttonAbout, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonAbout, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonAbout, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonAbout, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    //lv_obj_set_event_cb_mks(buttonContinue, event_handler,ID_S_CONTINUE,"bmp_Breakpoint.bin",0);
+    //lv_imgbtn_set_src(buttonContinue, LV_BTN_STATE_REL, &bmp_pic);
+    //lv_imgbtn_set_src(buttonContinue, LV_BTN_STATE_PR, &bmp_pic);
+    //lv_imgbtn_set_style(buttonContinue, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    //lv_imgbtn_set_style(buttonContinue, LV_BTN_STATE_REL, &tft_style_lable_rel);
+    #if HAS_SUICIDE
+      lv_obj_set_event_cb_mks(buMotorOff, event_handler, ID_S_MOTOR_OFF, "bmp_Mamual.bin", 0);
+    #else
+      lv_obj_set_event_cb_mks(buMotorOff, event_handler, ID_S_MOTOR_OFF, "bmp_Motor_off.bin", 0);
+    #endif
+    lv_imgbtn_set_src(buMotorOff, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buMotorOff, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buMotorOff, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buMotorOff, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonLanguage, event_handler, ID_S_LANGUAGE, "bmp_Language.bin", 0);
+    lv_imgbtn_set_src(buttonLanguage, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonLanguage, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonLanguage, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonLanguage, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_S_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  /*lv_obj_set_pos(buttonWifi,INTERVAL_V,titleHeight);
+  lv_obj_set_pos(buttonFan,BTN_X_PIXEL+INTERVAL_V*2,titleHeight);
+  lv_obj_set_pos(buttonAbout,BTN_X_PIXEL*2+INTERVAL_V*3,titleHeight);
+  lv_obj_set_pos(buttonContinue,BTN_X_PIXEL*3+INTERVAL_V*4,titleHeight);
+  lv_obj_set_pos(buMotorOff,INTERVAL_V,  BTN_Y_PIXEL+INTERVAL_H+titleHeight);
+  lv_obj_set_pos(buttonLanguage,BTN_X_PIXEL+INTERVAL_V*2,BTN_Y_PIXEL+INTERVAL_H+titleHeight);
+  lv_obj_set_pos(buttonBack,BTN_X_PIXEL*3+INTERVAL_V*4,  BTN_Y_PIXEL+INTERVAL_H+titleHeight);*/
+
+  //lv_obj_set_pos(buttonWifi,INTERVAL_V,titleHeight);
+  lv_obj_set_pos(buttonFan, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight);
+  lv_obj_set_pos(buttonAbout, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight);
+  //lv_obj_set_pos(buttonContinue,BTN_X_PIXEL*3+INTERVAL_V*4,titleHeight);
+  lv_obj_set_pos(buMotorOff, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonLanguage, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  //lv_btn_set_layout(buttonWifi, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonFan, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonAbout, LV_LAYOUT_OFF);
+  //lv_btn_set_layout(buttonContinue, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buMotorOff, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonLanguage, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  //lv_obj_t * labelWifi= lv_label_create(buttonWifi, NULL);
+  lv_obj_t * labelFan = lv_label_create(buttonFan, NULL);
+  lv_obj_t * label_About = lv_label_create(buttonAbout, NULL);
+  //lv_obj_t * label_Continue = lv_label_create(buttonContinue, NULL);
+  lv_obj_t * label_MotorOff = lv_label_create(buMotorOff, NULL);
+  lv_obj_t * label_Language = lv_label_create(buttonLanguage, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+
+  if (gCfgItems.multiple_language != 0) {
+    //lv_label_set_text(labelWifi, set_menu.wifi);
+    //lv_obj_align(labelWifi, buttonWifi, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelFan, set_menu.fan);
+    lv_obj_align(labelFan, buttonFan, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_About, set_menu.about);
+    lv_obj_align(label_About, buttonAbout, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    //lv_label_set_text(label_Continue, set_menu.breakpoint);
+    //lv_obj_align(label_Continue, buttonContinue, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
+    #if HAS_SUICIDE
+      lv_label_set_text(label_MotorOff, set_menu.shutdown);
+    #else
+      lv_label_set_text(label_MotorOff, set_menu.motoroff);
+    #endif
+    lv_obj_align(label_MotorOff, buMotorOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Language, set_menu.language);
+    lv_obj_align(label_Language, buttonLanguage, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+}
+
+void lv_clear_set() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_set.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_set(void);
+extern void lv_clear_set();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_tool.cpp

@@ -0,0 +1,270 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "lv_conf.h"
+#include "draw_ui.h"
+//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
+//#include "../lvgl/src/lv_objx/lv_img.h"
+//#include "../lvgl/src/lv_core/lv_disp.h"
+//#include "../lvgl/src/lv_core/lv_refr.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../gcode/queue.h"
+
+//static lv_obj_t *buttonMoveZ,*buttonTest,*buttonZ0,*buttonStop,*buttonReturn;
+static lv_obj_t * scr;
+#if ENABLED(MKS_TEST)
+  extern uint8_t curent_disp_ui;
+#endif
+
+#define ID_T_PRE_HEAT   1
+#define ID_T_EXTRUCT    2
+#define ID_T_MOV        3
+#define ID_T_HOME       4
+#define ID_T_LEVELING   5
+#define ID_T_FILAMENT   6
+#define ID_T_MORE       7
+#define ID_T_RETURN     8
+
+static void event_handler(lv_obj_t * obj, lv_event_t event) {
+  switch (obj->mks_obj_id) {
+    case ID_T_PRE_HEAT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_tool();
+        lv_draw_preHeat();
+      }
+      break;
+    case ID_T_EXTRUCT:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_tool();
+        lv_draw_extrusion();
+      }
+      break;
+    case ID_T_MOV:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_tool();
+        lv_draw_move_motor();
+      }
+      break;
+    case ID_T_HOME:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        lv_clear_tool();
+        lv_draw_home();
+      }
+      break;
+    case ID_T_LEVELING:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+          queue.enqueue_one_P(PSTR("G28"));
+          queue.enqueue_one_P(PSTR("G29"));
+        #else
+          uiCfg.leveling_first_time = 1;
+          lv_clear_tool();
+          lv_draw_manualLevel();
+        #endif
+      }
+      break;
+    case ID_T_FILAMENT: break;
+    case ID_T_MORE: break;
+    case ID_T_RETURN:
+      if (event == LV_EVENT_CLICKED) {
+        // nothing to do
+      }
+      else if (event == LV_EVENT_RELEASED) {
+        TERN_(MKS_TEST, curent_disp_ui = 1);
+        lv_obj_del(scr);
+        lv_draw_ready_print();
+      }
+      break;
+  }
+}
+
+void lv_draw_tool(void) {
+  lv_obj_t *buttonPreHeat, *buttonExtrusion, *buttonMove, *buttonHome, *buttonLevel;
+  lv_obj_t *buttonBack;
+
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] != TOOL_UI) {
+    disp_state_stack._disp_index++;
+    disp_state_stack._disp_state[disp_state_stack._disp_index] = TOOL_UI;
+  }
+  disp_state = TOOL_UI;
+
+  scr = lv_obj_create(NULL, NULL);
+
+  //static lv_style_t tool_style;
+
+  lv_obj_set_style(scr, &tft_style_scr);
+  lv_scr_load(scr);
+  lv_obj_clean(scr);
+
+  lv_obj_t * title = lv_label_create(scr, NULL);
+  lv_obj_set_style(title, &tft_style_lable_rel);
+  lv_obj_set_pos(title, TITLE_XPOS, TITLE_YPOS);
+  lv_label_set_text(title, creat_title_text());
+
+  lv_refr_now(lv_refr_get_disp_refreshing());
+
+  LV_IMG_DECLARE(bmp_pic);
+
+  /*Create an Image button*/
+  buttonPreHeat = lv_imgbtn_create(scr, NULL);
+  buttonExtrusion = lv_imgbtn_create(scr, NULL);
+  buttonMove = lv_imgbtn_create(scr, NULL);
+  buttonHome = lv_imgbtn_create(scr, NULL);
+  buttonLevel = lv_imgbtn_create(scr, NULL);
+  //buttonFilament = lv_imgbtn_create(scr, NULL);
+  //buttonMore = lv_imgbtn_create(scr, NULL);
+  buttonBack = lv_imgbtn_create(scr, NULL);
+
+  lv_obj_set_event_cb_mks(buttonPreHeat, event_handler, ID_T_PRE_HEAT, "bmp_PreHeat.bin", 0);
+  lv_imgbtn_set_src(buttonPreHeat, LV_BTN_STATE_REL, &bmp_pic);
+  lv_imgbtn_set_src(buttonPreHeat, LV_BTN_STATE_PR, &bmp_pic);
+  lv_imgbtn_set_style(buttonPreHeat, LV_BTN_STATE_PR, &tft_style_lable_pre);
+  lv_imgbtn_set_style(buttonPreHeat, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  lv_obj_clear_protect(buttonPreHeat, LV_PROTECT_FOLLOW);
+
+  #if 1
+    lv_obj_set_event_cb_mks(buttonExtrusion, event_handler, ID_T_EXTRUCT, "bmp_Extruct.bin", 0);
+    lv_imgbtn_set_src(buttonExtrusion, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonExtrusion, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonExtrusion, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonExtrusion, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonMove, event_handler, ID_T_MOV, "bmp_Mov.bin", 0);
+    lv_imgbtn_set_src(buttonMove, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonMove, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonMove, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonMove, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonHome, event_handler, ID_T_HOME, "bmp_Zero.bin", 0);
+    lv_imgbtn_set_src(buttonHome, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonHome, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonHome, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonHome, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonLevel, event_handler, ID_T_LEVELING, "bmp_Leveling.bin", 0);
+    lv_imgbtn_set_src(buttonLevel, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonLevel, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonLevel, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonLevel, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    //lv_obj_set_event_cb_mks(buttonFilament, event_handler,ID_T_FILAMENT,"bmp_Filamentchange.bin",0);
+    //lv_imgbtn_set_src(buttonFilament, LV_BTN_STATE_REL, &bmp_pic);
+    //lv_imgbtn_set_src(buttonFilament, LV_BTN_STATE_PR, &bmp_pic);
+    //lv_imgbtn_set_style(buttonFilament, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    //lv_imgbtn_set_style(buttonFilament, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    //lv_obj_set_event_cb_mks(buttonMore, event_handler,ID_T_MORE,"bmp_More.bin",0);
+    //lv_imgbtn_set_src(buttonMore, LV_BTN_STATE_REL, &bmp_pic);
+    //lv_imgbtn_set_src(buttonMore, LV_BTN_STATE_PR, &bmp_pic);
+    //lv_imgbtn_set_style(buttonMore, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    //lv_imgbtn_set_style(buttonMore, LV_BTN_STATE_REL, &tft_style_lable_rel);
+
+    lv_obj_set_event_cb_mks(buttonBack, event_handler, ID_T_RETURN, "bmp_Return.bin", 0);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_REL, &bmp_pic);
+    lv_imgbtn_set_src(buttonBack, LV_BTN_STATE_PR, &bmp_pic);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_PR, &tft_style_lable_pre);
+    lv_imgbtn_set_style(buttonBack, LV_BTN_STATE_REL, &tft_style_lable_rel);
+  #endif
+
+  lv_obj_set_pos(buttonPreHeat, INTERVAL_V, titleHeight);
+  lv_obj_set_pos(buttonExtrusion, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight);
+  lv_obj_set_pos(buttonMove, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight);
+  lv_obj_set_pos(buttonHome, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight);
+  lv_obj_set_pos(buttonLevel, INTERVAL_V,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+  //lv_obj_set_pos(buttonFilament,BTN_X_PIXEL+INTERVAL_V*2,BTN_Y_PIXEL+INTERVAL_H+titleHeight);
+  //lv_obj_set_pos(buttonMore,BTN_X_PIXEL*2+INTERVAL_V*3,  BTN_Y_PIXEL+INTERVAL_H+titleHeight);
+  lv_obj_set_pos(buttonBack, BTN_X_PIXEL * 3 + INTERVAL_V * 4,  BTN_Y_PIXEL + INTERVAL_H + titleHeight);
+
+  /*Create a label on the Image button*/
+  lv_btn_set_layout(buttonPreHeat, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonExtrusion, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonMove, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonHome, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonLevel, LV_LAYOUT_OFF);
+  //lv_btn_set_layout(buttonFilament, LV_LAYOUT_OFF);
+  //lv_btn_set_layout(buttonMore, LV_LAYOUT_OFF);
+  lv_btn_set_layout(buttonBack, LV_LAYOUT_OFF);
+
+  lv_obj_t * labelPreHeat = lv_label_create(buttonPreHeat, NULL);
+  lv_obj_t * labelExtrusion = lv_label_create(buttonExtrusion, NULL);
+  lv_obj_t * label_Move = lv_label_create(buttonMove, NULL);
+  lv_obj_t * label_Home = lv_label_create(buttonHome, NULL);
+  lv_obj_t * label_Level = lv_label_create(buttonLevel, NULL);
+  //lv_obj_t * label_Filament = lv_label_create(buttonFilament, NULL);
+  //lv_obj_t * label_More = lv_label_create(buttonMore, NULL);
+  lv_obj_t * label_Back = lv_label_create(buttonBack, NULL);
+
+  if (gCfgItems.multiple_language != 0) {
+    lv_label_set_text(labelPreHeat, tool_menu.preheat);
+    lv_obj_align(labelPreHeat, buttonPreHeat, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(labelExtrusion, tool_menu.extrude);
+    lv_obj_align(labelExtrusion, buttonExtrusion, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Move, tool_menu.move);
+    lv_obj_align(label_Move, buttonMove, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Home, tool_menu.home);
+    lv_obj_align(label_Home, buttonHome, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    /*
+    if (gCfgItems.leveling_mode != 2) {
+      lv_label_set_text(label_Level, gCfgItems.leveling_mode == 1 ? tool_menu.autoleveling : tool_menu.leveling);
+      lv_obj_align(label_Level, buttonLevel, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+    }
+    */
+    lv_label_set_text(label_Level, tool_menu.TERN(AUTO_BED_LEVELING_BILINEAR, autoleveling, leveling));
+    lv_obj_align(label_Level, buttonLevel, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    //lv_label_set_text(label_Filament, tool_menu.filament);
+    //lv_obj_align(label_Filament, buttonFilament, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    //lv_label_set_text(label_More, tool_menu.more);
+    //lv_obj_align(label_More, buttonMore, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+
+    lv_label_set_text(label_Back, common_menu.text_back);
+    lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+  }
+}
+
+void lv_clear_tool() { lv_obj_del(scr); }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/draw_tool.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+extern void lv_draw_tool(void);
+extern void lv_clear_tool();
+
+//extern void disp_temp_ready_print();
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h

@@ -0,0 +1,229 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+#include <stdint.h>
+#include <string.h>
+#include "lvgl.h"
+#include "inc/tft_multi_language.h"
+#include "inc/draw_ready_print.h"
+#include "inc/draw_language.h"
+#include "inc/draw_set.h"
+#include "inc/draw_tool.h"
+#include "inc/draw_print_file.h"
+#include "inc/draw_dialog.h"
+#include "inc/draw_printing.h"
+#include "inc/draw_opration.h"
+#include "inc/draw_preHeat.h"
+#include "inc/draw_extrusion.h"
+#include "inc/draw_home.h"
+#include "inc/draw_move_motor.h"
+#include "inc/draw_fan.h"
+#include "inc/draw_about.h"
+#include "inc/draw_change_speed.h"
+#include "inc/draw_manuaLevel.h"
+#include "inc/draw_error_message.h"
+#include "inc/printer_opration.h"
+
+#define TFT35
+
+#ifdef TFT35
+
+  #define TFT_WIDTH         480
+  #define TFT_HEIGHT        320
+
+  #define titleHeight        36   // TFT_screen.title_high
+  #define INTERVAL_H          2   // TFT_screen.gap_h // 2
+  #define INTERVAL_V          2   // TFT_screen.gap_v // 2
+  #define BTN_X_PIXEL       117   // TFT_screen.btn_x_pixel
+  #define BTN_Y_PIXEL       140   // TFT_screen.btn_y_pixel
+
+  #define SIMPLE_FIRST_PAGE_GRAP   30
+
+  #define BUTTON_TEXT_Y_OFFSET    -20
+
+  #define TITLE_XPOS          3    //TFT_screen.title_xpos
+  #define TITLE_YPOS          5    //TFT_screen.title_ypos
+
+  #define FILE_BTN_CNT        6
+
+  #define OTHER_BTN_XPIEL   117
+  #define OTHER_BTN_YPIEL    92
+
+  #define FILE_PRE_PIC_X_OFFSET 8
+  #define FILE_PRE_PIC_Y_OFFSET 0
+
+  #define PREVIEW_LITTLE_PIC_SIZE   40910//400*100+9*101+1
+  #define PREVIEW_SIZE      202720//(PREVIEW_LITTLE_PIC_SIZE+800*200+201*9+1)
+
+  #define GCFG_FLAG_VALUE   0xEE
+
+#else
+
+  #define TFT_WIDTH     320
+  #define TFT_HEIGHT    240
+
+#endif
+
+extern char public_buf_m[100];
+extern char public_buf_l[30];
+
+typedef struct {
+  uint8_t spi_flash_flag;
+  uint8_t multiple_language;
+  uint8_t language;
+  uint8_t leveling_mode;
+  uint8_t from_flash_pic;
+  uint8_t finish_power_off;
+  uint8_t pause_reprint;
+  uint32_t curFilesize;
+} CFG_ITMES;
+
+typedef struct {
+  uint8_t curTempType : 1,
+          curSprayerChoose : 3,
+          stepHeat : 4;
+  uint8_t leveling_first_time : 1;
+  uint8_t extruStep;
+  uint8_t extruSpeed;
+  uint8_t print_state;
+  uint8_t stepPrintSpeed;
+  uint8_t waitEndMoves;
+  uint16_t moveSpeed;
+  float move_dist;
+} UI_CFG;
+
+typedef enum {
+  MAIN_UI,
+  PRINT_READY_UI,
+  PRINT_FILE_UI,
+  PRINTING_UI,
+  MOVE_MOTOR_UI,
+  OPERATE_UI,
+  PAUSE_UI,
+  EXTRUSION_UI,
+  FAN_UI,
+  PRE_HEAT_UI,
+  CHANGE_SPEED_UI,
+  TEMP_UI,
+  SET_UI,
+  ZERO_UI,
+  SPRAYER_UI,
+  MACHINE_UI,
+  LANGUAGE_UI,
+  ABOUT_UI,
+  LOG_UI,
+  DISK_UI,
+  CALIBRATE_UI,
+  DIALOG_UI,
+  WIFI_UI,
+  MORE_UI,
+  FILETRANSFER_UI,
+  FILETRANSFERSTATE_UI,
+  PRINT_MORE_UI,
+  FILAMENTCHANGE_UI,
+  LEVELING_UI,
+  MESHLEVELING_UI,
+  BIND_UI,
+  ZOFFSET_UI,
+  TOOL_UI,
+  HARDWARE_TEST_UI,
+  WIFI_LIST_UI,
+  KEY_BOARD_UI,
+  TIPS_UI,
+  MACHINE_PARA_UI,
+  MACHINE_SETTINGS_UI,
+  TEMPERATURE_SETTINGS_UI,
+  MOTOR_SETTINGS_UI,
+  MACHINETYPE_UI,
+  STROKE_UI,
+  HOME_DIR_UI,
+  ENDSTOP_TYPE_UI,
+  FILAMENT_SETTINGS_UI,
+  LEVELING_SETTIGNS_UI,
+  LEVELING_PARA_UI,
+  DELTA_LEVELING_PARA_UI,
+  XYZ_LEVELING_PARA_UI,
+  MAXFEEDRATE_UI,
+  STEPS_UI,
+  ACCELERATION_UI,
+  JERK_UI,
+  MOTORDIR_UI,
+  HOMESPEED_UI,
+  NOZZLE_CONFIG_UI,
+  HOTBED_CONFIG_UI,
+  ADVANCED_UI,
+  DOUBLE_Z_UI,
+  ENABLE_INVERT_UI,
+  NUMBER_KEY_UI,
+  BABY_STEP_UI,
+  ERROR_MESSAGE_UI
+} DISP_STATE;
+
+typedef struct {
+  DISP_STATE _disp_state[100];
+  int _disp_index;
+} DISP_STATE_STACK;
+
+typedef struct {
+  int16_t days;
+  uint16_t hours;
+  uint8_t minutes;
+  volatile int8_t seconds;
+  int8_t ms_10;
+  int8_t start;
+} PRINT_TIME;
+extern PRINT_TIME print_time;
+
+extern CFG_ITMES gCfgItems;
+extern UI_CFG uiCfg;
+extern DISP_STATE disp_state;
+extern DISP_STATE last_disp_state;
+extern DISP_STATE_STACK disp_state_stack;
+
+extern lv_style_t tft_style_scr;
+extern lv_style_t tft_style_lable_pre;
+extern lv_style_t tft_style_lable_rel;
+
+extern void gCfgItems_init();
+extern void ui_cfg_init();
+extern void tft_style_init();
+extern char *creat_title_text(void);
+extern void preview_gcode_prehandle(char *path);
+extern void update_spi_flash();
+extern void disp_pre_gcode(int xpos_pixel, int ypos_pixel);
+extern void GUI_RefreshPage();
+extern void clear_cur_ui();
+extern void draw_return_ui();
+extern void sd_detection();
+extern void gCfg_to_spiFlah();
+extern void print_time_count();
+
+extern void LV_TASK_HANDLER();
+
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/gb2312_puhui16.cpp

@@ -0,0 +1,111 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+#include "lvgl.h"
+#include "pic_manager.h"
+
+typedef struct {
+  uint16_t min;
+  uint16_t max;
+  uint8_t bpp;
+  uint8_t reserved[3];
+} x_header_t;
+
+typedef struct {
+  uint32_t pos;
+} x_table_t;
+
+typedef struct {
+  uint8_t adv_w;
+  uint8_t box_w;
+} glyph_dsc_t;
+
+static x_header_t __g_xbf_hd = { .min = 0, .max = 0, .bpp = 0 };
+static uint8_t __g_font_buf[75];
+
+static uint8_t *__user_font_getdata(int offset, int size) {
+  //memset(__g_font_buf,0,sizeof(__g_font_buf));
+  get_spi_flash_data((char *)__g_font_buf, offset, size);
+  return __g_font_buf;
+  //return &buf_test[offset];
+}
+
+static const uint8_t * __user_font_get_bitmap(const lv_font_t * font, uint32_t unicode_letter) {
+  if (__g_xbf_hd.max == 0) {
+    uint8_t *p = __user_font_getdata(0, sizeof(x_header_t));
+    memcpy(&__g_xbf_hd, p, sizeof(x_header_t));
+  }
+  if (unicode_letter > __g_xbf_hd.max || unicode_letter < __g_xbf_hd.min)
+    return NULL;
+  uint32_t unicode_offset = sizeof(x_header_t) + (unicode_letter - __g_xbf_hd.min) * 4;
+  uint32_t *p_pos = (uint32_t *)__user_font_getdata(unicode_offset, 4);
+  if (p_pos[0] != 0) {
+    uint32_t pos = p_pos[0];
+    //glyph_dsc_t * gdsc = (glyph_dsc_t*)__user_font_getdata(pos, 2);
+    __user_font_getdata(pos, 2);
+    //return __user_font_getdata(pos+2, gdsc->box_w*__g_xbf_hd.bpp/8);
+    return __user_font_getdata(pos + 2, sizeof(__g_font_buf));
+  }
+  return NULL;
+}
+
+static bool __user_font_get_glyph_dsc(const lv_font_t * font, lv_font_glyph_dsc_t * dsc_out, uint32_t unicode_letter, uint32_t unicode_letter_next) {
+  if (__g_xbf_hd.max == 0) {
+    uint8_t *p = __user_font_getdata(0, sizeof(x_header_t));
+    memcpy(&__g_xbf_hd, p, sizeof(x_header_t));
+  }
+  if (unicode_letter > __g_xbf_hd.max || unicode_letter < __g_xbf_hd.min)
+    return NULL;
+  uint32_t unicode_offset = sizeof(x_header_t) + (unicode_letter - __g_xbf_hd.min) * 4;
+  uint32_t *p_pos = (uint32_t *)__user_font_getdata(unicode_offset, 4);
+  if (p_pos[0] != 0) {
+    glyph_dsc_t * gdsc = (glyph_dsc_t*)__user_font_getdata(p_pos[0], 2);
+    dsc_out->adv_w = gdsc->adv_w;
+    dsc_out->box_h = font->line_height;
+    dsc_out->box_w = gdsc->box_w;
+    dsc_out->ofs_x = 0;
+    dsc_out->ofs_y = 0;
+    dsc_out->bpp = __g_xbf_hd.bpp;
+    return true;
+  }
+  return false;
+}
+
+/*lv_font_t gb2312_puhui32 = {
+.get_glyph_bitmap = __user_font_get_bitmap,
+.get_glyph_dsc = __user_font_get_glyph_dsc,
+.line_height = 25,
+.base_line = 0,
+};*/
+lv_font_t gb2312_puhui32;
+void init_gb2312_font() {
+  gb2312_puhui32.get_glyph_bitmap = __user_font_get_bitmap;
+  gb2312_puhui32.get_glyph_dsc = __user_font_get_glyph_dsc;
+  gb2312_puhui32.line_height = 25;
+  gb2312_puhui32.base_line = 0;
+}
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/mks_hardware_test.cpp

@@ -0,0 +1,594 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "tft_lvgl_configuration.h"
+#include "lvgl.h"
+#include "draw_ready_print.h"
+#include "W25Qxx.h"
+#include "pic_manager.h"
+#include "mks_hardware_test.h"
+
+#include "../../../../MarlinCore.h"
+#include "../../../../module/temperature.h"
+#include "../../../../feature/touch/xpt2046.h"
+
+#if ENABLED(MKS_TEST)
+
+  extern uint8_t curent_disp_ui;
+
+  uint8_t pw_det_sta, pw_off_sta, mt_det_sta, mt_det2_sta, mt_det3_sta;
+  uint8_t endstopx1_sta, endstopx2_sta, endstopy1_sta, endstopy2_sta, endstopz1_sta, endstopz2_sta;
+  void test_gpio_readlevel_L() {
+    volatile uint32_t itest;
+    WRITE(WIFI_IO2_PIN, HIGH);
+    itest = 10000;
+    while (itest--);
+    pw_det_sta = (READ(POWER_LOSS_PIN) == 0);
+    pw_off_sta = (READ(PS_ON_PIN) == 0);
+    mt_det_sta = (READ(FIL_RUNOUT_PIN) == 0);
+    mt_det2_sta = (READ(FIL_RUNOUT_2_PIN) == 0);
+    mt_det3_sta = (READ(FIL_RUNOUT_3_PIN) == 0);
+    endstopx1_sta = (READ(X_MIN_PIN) == 0);
+    endstopx2_sta = (READ(X_MAX_PIN) == 0);
+    endstopy1_sta = (READ(Y_MIN_PIN) == 0);
+    endstopy2_sta = (READ(Y_MAX_PIN) == 0);
+    endstopz1_sta = (READ(Z_MIN_PIN) == 0);
+    endstopz2_sta = (READ(Z_MAX_PIN) == 0);
+  }
+
+  void test_gpio_readlevel_H() {
+    volatile uint32_t itest;
+    WRITE(WIFI_IO2_PIN, LOW);
+    itest = 10000;
+    while (itest--);
+    pw_det_sta = (READ(POWER_LOSS_PIN) == 1);
+    pw_off_sta = (READ(PS_ON_PIN) == 1);
+    mt_det_sta = (READ(FIL_RUNOUT_PIN) == 1);
+    mt_det2_sta = (READ(FIL_RUNOUT_2_PIN) == 1);
+    mt_det3_sta = (READ(FIL_RUNOUT_3_PIN) == 1);
+    endstopx1_sta = (READ(X_MIN_PIN) == 1);
+    endstopx2_sta = (READ(X_MAX_PIN) == 1);
+    endstopy1_sta = (READ(Y_MIN_PIN) == 1);
+    endstopy2_sta = (READ(Y_MAX_PIN) == 1);
+    endstopz1_sta = (READ(Z_MIN_PIN) == 1);
+    endstopz2_sta = (READ(Z_MAX_PIN) == 1);
+  }
+
+  void init_Tst_GPIO() {
+    SET_INPUT_PULLUP(X_MIN_PIN);
+    SET_INPUT_PULLUP(X_MAX_PIN);
+    SET_INPUT_PULLUP(Y_MIN_PIN);
+    SET_INPUT_PULLUP(Y_MAX_PIN);
+    SET_INPUT_PULLUP(Z_MIN_PIN);
+    SET_INPUT_PULLUP(Z_MAX_PIN);
+
+    SET_OUTPUT(WIFI_IO2_PIN);
+
+    SET_INPUT_PULLUP(FIL_RUNOUT_PIN);
+    SET_INPUT_PULLUP(FIL_RUNOUT_2_PIN);
+    SET_INPUT_PULLUP(FIL_RUNOUT_3_PIN);
+
+    SET_INPUT_PULLUP(POWER_LOSS_PIN);
+    SET_INPUT_PULLUP(PS_ON_PIN);
+
+    SET_INPUT_PULLUP(SERVO0_PIN);
+
+    SET_OUTPUT(E0_ENABLE_PIN);
+    SET_OUTPUT(X_ENABLE_PIN);
+
+    WRITE(X_ENABLE_PIN, LOW);
+    WRITE(Y_ENABLE_PIN, LOW);
+    WRITE(Z_ENABLE_PIN, LOW);
+    WRITE(E0_ENABLE_PIN, LOW);
+    WRITE(E1_ENABLE_PIN, LOW);
+    WRITE(E2_ENABLE_PIN, LOW);
+  }
+
+  void mks_test_beeper() {
+    WRITE(BEEPER_PIN, HIGH);
+    delay(100);
+    WRITE(BEEPER_PIN, LOW);
+    delay(100);
+  }
+
+  void Test_GPIO() {
+    init_Tst_GPIO();
+
+    test_gpio_readlevel_L();
+    test_gpio_readlevel_H();
+    test_gpio_readlevel_L();
+    if ((pw_det_sta == 1) && (mt_det_sta == 1) && (mt_det2_sta == 1) && (mt_det3_sta == 1)) {
+      if (curent_disp_ui == 1) disp_det_ok();
+    }
+    else if (curent_disp_ui == 1) disp_det_error();
+    if ((endstopx1_sta == 1)
+        && (endstopx2_sta == 1)
+        && (endstopy1_sta == 1)
+        && (endstopy2_sta == 1)
+        && (endstopz1_sta == 1)
+        && (endstopz2_sta == 1)
+        ) {
+      if (curent_disp_ui == 1) disp_Limit_ok();
+    }
+    else if (curent_disp_ui == 1)
+      disp_Limit_error();
+      //mks_test_beeper();
+
+  }
+
+  void mks_test() {
+    if (millis() % 2000 < 1000) {
+      WRITE(X_DIR_PIN, LOW);
+      WRITE(Y_DIR_PIN, LOW);
+      WRITE(Z_DIR_PIN, LOW);
+      WRITE(E0_DIR_PIN, LOW);
+      WRITE(E1_DIR_PIN, LOW);
+      WRITE(E2_DIR_PIN, LOW);
+      thermalManager.fan_speed[0] = 255;
+      WRITE(HEATER_2_PIN, HIGH); // HE2
+      WRITE(HEATER_1_PIN, HIGH); // HE1
+      WRITE(HEATER_0_PIN, HIGH); // HE0
+      WRITE(HEATER_BED_PIN, HIGH); // HOT-BED
+    }
+    else {
+      WRITE(X_DIR_PIN, HIGH);
+      WRITE(Y_DIR_PIN, HIGH);
+      WRITE(Z_DIR_PIN, HIGH);
+      WRITE(E0_DIR_PIN, HIGH);
+      WRITE(E1_DIR_PIN, HIGH);
+      WRITE(E2_DIR_PIN, HIGH);
+      thermalManager.fan_speed[0] = 0;
+      WRITE(HEATER_2_PIN, LOW); // HE2
+      WRITE(HEATER_1_PIN, LOW); // HE1
+      WRITE(HEATER_0_PIN, LOW); // HE0
+      WRITE(HEATER_BED_PIN, LOW); // HOT-BED
+    }
+    if ((endstopx1_sta == 1) && (endstopx2_sta == 1)
+        && (endstopy1_sta == 1) && (endstopy2_sta == 1)
+        && (endstopz1_sta == 1) && (endstopz2_sta == 1)
+        ) {
+
+    }
+    else {
+      mks_test_beeper();
+    }
+
+    if (curent_disp_ui == 1)
+      disp_test();
+  }
+
+#endif // MKS_TEST
+
+static const uint16_t ASCII_Table_16x24[] PROGMEM = {
+  // Space ' '
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '!'
+  0x0000, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0000, 0x0000,
+  0x0180, 0x0180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '"'
+  0x0000, 0x0000, 0x00CC, 0x00CC, 0x00CC, 0x00CC, 0x00CC, 0x00CC,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '#'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0C60, 0x0C60,
+  0x0C60, 0x0630, 0x0630, 0x1FFE, 0x1FFE, 0x0630, 0x0738, 0x0318,
+  0x1FFE, 0x1FFE, 0x0318, 0x0318, 0x018C, 0x018C, 0x018C, 0x0000,
+  // '$'
+  0x0000, 0x0080, 0x03E0, 0x0FF8, 0x0E9C, 0x1C8C, 0x188C, 0x008C,
+  0x0098, 0x01F8, 0x07E0, 0x0E80, 0x1C80, 0x188C, 0x188C, 0x189C,
+  0x0CB8, 0x0FF0, 0x03E0, 0x0080, 0x0080, 0x0000, 0x0000, 0x0000,
+  // '%'
+  0x0000, 0x0000, 0x0000, 0x180E, 0x0C1B, 0x0C11, 0x0611, 0x0611,
+  0x0311, 0x0311, 0x019B, 0x018E, 0x38C0, 0x6CC0, 0x4460, 0x4460,
+  0x4430, 0x4430, 0x4418, 0x6C18, 0x380C, 0x0000, 0x0000, 0x0000,
+  // '&'
+  0x0000, 0x01E0, 0x03F0, 0x0738, 0x0618, 0x0618, 0x0330, 0x01F0,
+  0x00F0, 0x00F8, 0x319C, 0x330E, 0x1E06, 0x1C06, 0x1C06, 0x3F06,
+  0x73FC, 0x21F0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // "'"
+  0x0000, 0x0000, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '('
+  0x0000, 0x0200, 0x0300, 0x0180, 0x00C0, 0x00C0, 0x0060, 0x0060,
+  0x0030, 0x0030, 0x0030, 0x0030, 0x0030, 0x0030, 0x0030, 0x0030,
+  0x0060, 0x0060, 0x00C0, 0x00C0, 0x0180, 0x0300, 0x0200, 0x0000,
+  // ')'
+  0x0000, 0x0020, 0x0060, 0x00C0, 0x0180, 0x0180, 0x0300, 0x0300,
+  0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600,
+  0x0300, 0x0300, 0x0180, 0x0180, 0x00C0, 0x0060, 0x0020, 0x0000,
+  // '*'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x00C0, 0x00C0,
+  0x06D8, 0x07F8, 0x01E0, 0x0330, 0x0738, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '+'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x3FFC, 0x3FFC, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // ','
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0180, 0x0180, 0x0100, 0x0100, 0x0080, 0x0000, 0x0000,
+  // '-'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x07E0, 0x07E0, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '.'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '/'
+  0x0000, 0x0C00, 0x0C00, 0x0600, 0x0600, 0x0600, 0x0300, 0x0300,
+  0x0300, 0x0380, 0x0180, 0x0180, 0x0180, 0x00C0, 0x00C0, 0x00C0,
+  0x0060, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '0'
+  0x0000, 0x03E0, 0x07F0, 0x0E38, 0x0C18, 0x180C, 0x180C, 0x180C,
+  0x180C, 0x180C, 0x180C, 0x180C, 0x180C, 0x180C, 0x0C18, 0x0E38,
+  0x07F0, 0x03E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '1'
+  0x0000, 0x0100, 0x0180, 0x01C0, 0x01F0, 0x0198, 0x0188, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '2'
+  0x0000, 0x03E0, 0x0FF8, 0x0C18, 0x180C, 0x180C, 0x1800, 0x1800,
+  0x0C00, 0x0600, 0x0300, 0x0180, 0x00C0, 0x0060, 0x0030, 0x0018,
+  0x1FFC, 0x1FFC, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '3'
+  0x0000, 0x01E0, 0x07F8, 0x0E18, 0x0C0C, 0x0C0C, 0x0C00, 0x0600,
+  0x03C0, 0x07C0, 0x0C00, 0x1800, 0x1800, 0x180C, 0x180C, 0x0C18,
+  0x07F8, 0x03E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '4'
+  0x0000, 0x0C00, 0x0E00, 0x0F00, 0x0F00, 0x0D80, 0x0CC0, 0x0C60,
+  0x0C60, 0x0C30, 0x0C18, 0x0C0C, 0x3FFC, 0x3FFC, 0x0C00, 0x0C00,
+  0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '5'
+  0x0000, 0x0FF8, 0x0FF8, 0x0018, 0x0018, 0x000C, 0x03EC, 0x07FC,
+  0x0E1C, 0x1C00, 0x1800, 0x1800, 0x1800, 0x180C, 0x0C1C, 0x0E18,
+  0x07F8, 0x03E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '6'
+  0x0000, 0x07C0, 0x0FF0, 0x1C38, 0x1818, 0x0018, 0x000C, 0x03CC,
+  0x0FEC, 0x0E3C, 0x1C1C, 0x180C, 0x180C, 0x180C, 0x1C18, 0x0E38,
+  0x07F0, 0x03E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '7'
+  0x0000, 0x1FFC, 0x1FFC, 0x0C00, 0x0600, 0x0600, 0x0300, 0x0380,
+  0x0180, 0x01C0, 0x00C0, 0x00E0, 0x0060, 0x0060, 0x0070, 0x0030,
+  0x0030, 0x0030, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '8'
+  0x0000, 0x03E0, 0x07F0, 0x0E38, 0x0C18, 0x0C18, 0x0C18, 0x0638,
+  0x07F0, 0x07F0, 0x0C18, 0x180C, 0x180C, 0x180C, 0x180C, 0x0C38,
+  0x0FF8, 0x03E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '9'
+  0x0000, 0x03E0, 0x07F0, 0x0E38, 0x0C1C, 0x180C, 0x180C, 0x180C,
+  0x1C1C, 0x1E38, 0x1BF8, 0x19E0, 0x1800, 0x0C00, 0x0C00, 0x0E1C,
+  0x07F8, 0x01F0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // ':'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0180, 0x0180,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0180, 0x0180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // ';'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0180, 0x0180,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0180, 0x0180, 0x0100, 0x0100, 0x0080, 0x0000, 0x0000, 0x0000,
+  // '<'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x1000, 0x1C00, 0x0F80, 0x03E0, 0x00F8, 0x0018, 0x00F8, 0x03E0,
+  0x0F80, 0x1C00, 0x1000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '='
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x1FF8, 0x0000, 0x0000, 0x0000, 0x1FF8, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '>'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0008, 0x0038, 0x01F0, 0x07C0, 0x1F00, 0x1800, 0x1F00, 0x07C0,
+  0x01F0, 0x0038, 0x0008, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '?'
+  0x0000, 0x03E0, 0x0FF8, 0x0C18, 0x180C, 0x180C, 0x1800, 0x0C00,
+  0x0600, 0x0300, 0x0180, 0x00C0, 0x00C0, 0x00C0, 0x0000, 0x0000,
+  0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '@'
+  0x0000, 0x0000, 0x07E0, 0x1818, 0x2004, 0x29C2, 0x4A22, 0x4411,
+  0x4409, 0x4409, 0x4409, 0x2209, 0x1311, 0x0CE2, 0x4002, 0x2004,
+  0x1818, 0x07E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'A'
+  0x0000, 0x0380, 0x0380, 0x06C0, 0x06C0, 0x06C0, 0x0C60, 0x0C60,
+  0x1830, 0x1830, 0x1830, 0x3FF8, 0x3FF8, 0x701C, 0x600C, 0x600C,
+  0xC006, 0xC006, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'B'
+  0x0000, 0x03FC, 0x0FFC, 0x0C0C, 0x180C, 0x180C, 0x180C, 0x0C0C,
+  0x07FC, 0x0FFC, 0x180C, 0x300C, 0x300C, 0x300C, 0x300C, 0x180C,
+  0x1FFC, 0x07FC, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'C'
+  0x0000, 0x07C0, 0x1FF0, 0x3838, 0x301C, 0x700C, 0x6006, 0x0006,
+  0x0006, 0x0006, 0x0006, 0x0006, 0x0006, 0x6006, 0x700C, 0x301C,
+  0x1FF0, 0x07E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'D'
+  0x0000, 0x03FE, 0x0FFE, 0x0E06, 0x1806, 0x1806, 0x3006, 0x3006,
+  0x3006, 0x3006, 0x3006, 0x3006, 0x3006, 0x1806, 0x1806, 0x0E06,
+  0x0FFE, 0x03FE, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'E'
+  0x0000, 0x3FFC, 0x3FFC, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C,
+  0x1FFC, 0x1FFC, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C,
+  0x3FFC, 0x3FFC, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'F'
+  0x0000, 0x3FF8, 0x3FF8, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018,
+  0x1FF8, 0x1FF8, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018,
+  0x0018, 0x0018, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'G'
+  0x0000, 0x0FE0, 0x3FF8, 0x783C, 0x600E, 0xE006, 0xC007, 0x0003,
+  0x0003, 0xFE03, 0xFE03, 0xC003, 0xC007, 0xC006, 0xC00E, 0xF03C,
+  0x3FF8, 0x0FE0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'H'
+  0x0000, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C,
+  0x3FFC, 0x3FFC, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C,
+  0x300C, 0x300C, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'I'
+  0x0000, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'J'
+  0x0000, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600,
+  0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0618, 0x0618, 0x0738,
+  0x03F0, 0x01E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'K'
+  0x0000, 0x3006, 0x1806, 0x0C06, 0x0606, 0x0306, 0x0186, 0x00C6,
+  0x0066, 0x0076, 0x00DE, 0x018E, 0x0306, 0x0606, 0x0C06, 0x1806,
+  0x3006, 0x6006, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'L'
+  0x0000, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018,
+  0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018,
+  0x1FF8, 0x1FF8, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'M'
+  0x0000, 0xE00E, 0xF01E, 0xF01E, 0xF01E, 0xD836, 0xD836, 0xD836,
+  0xD836, 0xCC66, 0xCC66, 0xCC66, 0xC6C6, 0xC6C6, 0xC6C6, 0xC6C6,
+  0xC386, 0xC386, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'N'
+  0x0000, 0x300C, 0x301C, 0x303C, 0x303C, 0x306C, 0x306C, 0x30CC,
+  0x30CC, 0x318C, 0x330C, 0x330C, 0x360C, 0x360C, 0x3C0C, 0x3C0C,
+  0x380C, 0x300C, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'O'
+  0x0000, 0x07E0, 0x1FF8, 0x381C, 0x700E, 0x6006, 0xC003, 0xC003,
+  0xC003, 0xC003, 0xC003, 0xC003, 0xC003, 0x6006, 0x700E, 0x381C,
+  0x1FF8, 0x07E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'P'
+  0x0000, 0x0FFC, 0x1FFC, 0x380C, 0x300C, 0x300C, 0x300C, 0x300C,
+  0x180C, 0x1FFC, 0x07FC, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C,
+  0x000C, 0x000C, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'Q'
+  0x0000, 0x07E0, 0x1FF8, 0x381C, 0x700E, 0x6006, 0xE003, 0xC003,
+  0xC003, 0xC003, 0xC003, 0xC003, 0xE007, 0x6306, 0x3F0E, 0x3C1C,
+  0x3FF8, 0xF7E0, 0xC000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'R'
+  0x0000, 0x0FFE, 0x1FFE, 0x3806, 0x3006, 0x3006, 0x3006, 0x3806,
+  0x1FFE, 0x07FE, 0x0306, 0x0606, 0x0C06, 0x1806, 0x1806, 0x3006,
+  0x3006, 0x6006, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'S'
+  0x0000, 0x03E0, 0x0FF8, 0x0C1C, 0x180C, 0x180C, 0x000C, 0x001C,
+  0x03F8, 0x0FE0, 0x1E00, 0x3800, 0x3006, 0x3006, 0x300E, 0x1C1C,
+  0x0FF8, 0x07E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'T'
+  0x0000, 0x7FFE, 0x7FFE, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'U'
+  0x0000, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C,
+  0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x300C, 0x1818,
+  0x1FF8, 0x07E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'V'
+  0x0000, 0x6003, 0x3006, 0x3006, 0x3006, 0x180C, 0x180C, 0x180C,
+  0x0C18, 0x0C18, 0x0E38, 0x0630, 0x0630, 0x0770, 0x0360, 0x0360,
+  0x01C0, 0x01C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'W'
+  0x0000, 0x6003, 0x61C3, 0x61C3, 0x61C3, 0x3366, 0x3366, 0x3366,
+  0x3366, 0x3366, 0x3366, 0x1B6C, 0x1B6C, 0x1B6C, 0x1A2C, 0x1E3C,
+  0x0E38, 0x0E38, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'X'
+  0x0000, 0xE00F, 0x700C, 0x3018, 0x1830, 0x0C70, 0x0E60, 0x07C0,
+  0x0380, 0x0380, 0x03C0, 0x06E0, 0x0C70, 0x1C30, 0x1818, 0x300C,
+  0x600E, 0xE007, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'Y'
+  0x0000, 0xC003, 0x6006, 0x300C, 0x381C, 0x1838, 0x0C30, 0x0660,
+  0x07E0, 0x03C0, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'Z'
+  0x0000, 0x7FFC, 0x7FFC, 0x6000, 0x3000, 0x1800, 0x0C00, 0x0600,
+  0x0300, 0x0180, 0x00C0, 0x0060, 0x0030, 0x0018, 0x000C, 0x0006,
+  0x7FFE, 0x7FFE, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '['
+  0x0000, 0x03E0, 0x03E0, 0x0060, 0x0060, 0x0060, 0x0060, 0x0060,
+  0x0060, 0x0060, 0x0060, 0x0060, 0x0060, 0x0060, 0x0060, 0x0060,
+  0x0060, 0x0060, 0x0060, 0x0060, 0x0060, 0x03E0, 0x03E0, 0x0000,
+  // '\'
+  0x0000, 0x0030, 0x0030, 0x0060, 0x0060, 0x0060, 0x00C0, 0x00C0,
+  0x00C0, 0x01C0, 0x0180, 0x0180, 0x0180, 0x0300, 0x0300, 0x0300,
+  0x0600, 0x0600, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // ']'
+  0x0000, 0x03E0, 0x03E0, 0x0300, 0x0300, 0x0300, 0x0300, 0x0300,
+  0x0300, 0x0300, 0x0300, 0x0300, 0x0300, 0x0300, 0x0300, 0x0300,
+  0x0300, 0x0300, 0x0300, 0x0300, 0x0300, 0x03E0, 0x03E0, 0x0000,
+  // '^'
+  0x0000, 0x0000, 0x01C0, 0x01C0, 0x0360, 0x0360, 0x0360, 0x0630,
+  0x0630, 0x0C18, 0x0C18, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '_'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '''
+  0x0000, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'a'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03F0, 0x07F8,
+  0x0C1C, 0x0C0C, 0x0F00, 0x0FF0, 0x0CF8, 0x0C0C, 0x0C0C, 0x0F1C,
+  0x0FF8, 0x18F0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'b'
+  0x0000, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x03D8, 0x0FF8,
+  0x0C38, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x0C38,
+  0x0FF8, 0x03D8, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'c'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03C0, 0x07F0,
+  0x0E30, 0x0C18, 0x0018, 0x0018, 0x0018, 0x0018, 0x0C18, 0x0E30,
+  0x07F0, 0x03C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'd'
+  0x0000, 0x1800, 0x1800, 0x1800, 0x1800, 0x1800, 0x1BC0, 0x1FF0,
+  0x1C30, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1C30,
+  0x1FF0, 0x1BC0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'e'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03C0, 0x0FF0,
+  0x0C30, 0x1818, 0x1FF8, 0x1FF8, 0x0018, 0x0018, 0x1838, 0x1C30,
+  0x0FF0, 0x07C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'f'
+  0x0000, 0x0F80, 0x0FC0, 0x00C0, 0x00C0, 0x00C0, 0x07F0, 0x07F0,
+  0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'g'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0DE0, 0x0FF8,
+  0x0E18, 0x0C0C, 0x0C0C, 0x0C0C, 0x0C0C, 0x0C0C, 0x0C0C, 0x0E18,
+  0x0FF8, 0x0DE0, 0x0C00, 0x0C0C, 0x061C, 0x07F8, 0x01F0, 0x0000,
+  // 'h'
+  0x0000, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x07D8, 0x0FF8,
+  0x1C38, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818,
+  0x1818, 0x1818, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'i'
+  0x0000, 0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'j'
+  0x0000, 0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00F8, 0x0078, 0x0000,
+  // 'k'
+  0x0000, 0x000C, 0x000C, 0x000C, 0x000C, 0x000C, 0x0C0C, 0x060C,
+  0x030C, 0x018C, 0x00CC, 0x006C, 0x00FC, 0x019C, 0x038C, 0x030C,
+  0x060C, 0x0C0C, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'l'
+  0x0000, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'm'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x3C7C, 0x7EFF,
+  0xE3C7, 0xC183, 0xC183, 0xC183, 0xC183, 0xC183, 0xC183, 0xC183,
+  0xC183, 0xC183, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'n'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0798, 0x0FF8,
+  0x1C38, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818,
+  0x1818, 0x1818, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'o'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03C0, 0x0FF0,
+  0x0C30, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x0C30,
+  0x0FF0, 0x03C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'p'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03D8, 0x0FF8,
+  0x0C38, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x0C38,
+  0x0FF8, 0x03D8, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0000,
+  // 'q'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1BC0, 0x1FF0,
+  0x1C30, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1C30,
+  0x1FF0, 0x1BC0, 0x1800, 0x1800, 0x1800, 0x1800, 0x1800, 0x0000,
+  // 'r'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x07B0, 0x03F0,
+  0x0070, 0x0030, 0x0030, 0x0030, 0x0030, 0x0030, 0x0030, 0x0030,
+  0x0030, 0x0030, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 's'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03E0, 0x03F0,
+  0x0E38, 0x0C18, 0x0038, 0x03F0, 0x07C0, 0x0C00, 0x0C18, 0x0E38,
+  0x07F0, 0x03E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 't'
+  0x0000, 0x0000, 0x0080, 0x00C0, 0x00C0, 0x00C0, 0x07F0, 0x07F0,
+  0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0,
+  0x07C0, 0x0780, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'u'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1818, 0x1818,
+  0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1818, 0x1C38,
+  0x1FF0, 0x19E0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'v'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x180C, 0x0C18,
+  0x0C18, 0x0C18, 0x0630, 0x0630, 0x0630, 0x0360, 0x0360, 0x0360,
+  0x01C0, 0x01C0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'w'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x41C1, 0x41C1,
+  0x61C3, 0x6363, 0x6363, 0x6363, 0x3636, 0x3636, 0x3636, 0x1C1C,
+  0x1C1C, 0x1C1C, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'x'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x381C, 0x1C38,
+  0x0C30, 0x0660, 0x0360, 0x0360, 0x0360, 0x0360, 0x0660, 0x0C30,
+  0x1C38, 0x381C, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // 'y'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x3018, 0x1830,
+  0x1830, 0x1870, 0x0C60, 0x0C60, 0x0CE0, 0x06C0, 0x06C0, 0x0380,
+  0x0380, 0x0380, 0x0180, 0x0180, 0x01C0, 0x00F0, 0x0070, 0x0000,
+  // 'z'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1FFC, 0x1FFC,
+  0x0C00, 0x0600, 0x0300, 0x0180, 0x00C0, 0x0060, 0x0030, 0x0018,
+  0x1FFC, 0x1FFC, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  // '{'
+  0x0000, 0x0300, 0x0180, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0,
+  0x00C0, 0x0060, 0x0060, 0x0030, 0x0060, 0x0040, 0x00C0, 0x00C0,
+  0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x0180, 0x0300, 0x0000, 0x0000,
+  // '|'
+  0x0000, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0000,
+  // '}'
+  0x0000, 0x0060, 0x00C0, 0x01C0, 0x0180, 0x0180, 0x0180, 0x0180,
+  0x0180, 0x0300, 0x0300, 0x0600, 0x0300, 0x0100, 0x0180, 0x0180,
+  0x0180, 0x0180, 0x0180, 0x0180, 0x00C0, 0x0060, 0x0000, 0x0000,
+  // '~'
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x10F0, 0x1FF8, 0x0F08, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+void disp_char_1624(uint16_t x, uint16_t y, uint8_t c, uint16_t charColor, uint16_t bkColor) {
+  for (uint16_t i = 0; i < 24; i++) {
+    const uint16_t tmp_char = pgm_read_word(&ASCII_Table_16x24[((c - 0x20) * 24) + i]);
+    for (uint16_t j = 0; j < 16; j++)
+      tft_set_point(x + j, y + i, ((tmp_char >> j) & 0x01) ? charColor : bkColor);
+  }
+}
+
+void disp_string(uint16_t x, uint16_t y, const char * string, uint16_t charColor, uint16_t bkColor) {
+  while (*string != '\0') {
+    disp_char_1624(x, y, *string, charColor, bkColor);
+    string++;
+    x += 16;
+  }
+}
+
+//static lv_obj_t * scr_test;
+void disp_pic_update() {
+  LCD_Clear(0x0000);
+  disp_string(120, 150, "PIC Updating...", 0xFFFF, 0x0000);
+}
+
+void disp_font_update() {
+  LCD_Clear(0x0000);
+  disp_string(120, 150, "FONT Updating...", 0xFFFF, 0x0000);
+}
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/mks_hardware_test.h

@@ -0,0 +1,31 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "lvgl.h"
+
+void Test_GPIO();
+void disp_char_1624(uint16_t x, uint16_t y, uint8_t c, uint16_t charColor, uint16_t bkColor);
+void disp_string(uint16_t x, uint16_t y, const char * string, uint16_t charColor, uint16_t bkColor);
+void mks_test();
+void disp_pic_update();
+void disp_font_update();

Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp

@@ -0,0 +1,736 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+#include "../../../../MarlinCore.h"
+
+//#include "type_define.h"
+#include "string.h"
+
+#include "pic_manager.h"
+#include "W25Qxx.h"
+#include "../../../../sd/cardreader.h"
+#include "draw_ready_print.h"
+#include "mks_hardware_test.h"
+
+//#include "gui.h"
+//#include "spi_flash.h"
+
+//uint8_t DMA_ERRO_FLAG;
+extern uint16_t DeviceCode;
+extern unsigned char bmp_public_buf[17 * 1024];
+
+#if ENABLED(SDSUPPORT)
+  extern char *createFilename(char * const buffer, const dir_t &p);
+#endif
+
+/*void SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead) {}*/
+
+uint32_t lv_get_pic_addr(uint8_t *Pname) {
+  uint8_t Pic_cnt;
+  uint8_t i, j;
+  PIC_MSG PIC;
+  uint32_t tmp_cnt = 0;
+  uint32_t addr = 0;
+
+  W25QXX.init(SPI_QUARTER_SPEED);
+
+  W25QXX.SPI_FLASH_BufferRead(&Pic_cnt, PIC_COUNTER_ADDR, 1);
+  if (Pic_cnt == 0xff)
+    Pic_cnt = 0;
+  for (i = 0; i < Pic_cnt; i++) {
+    j = 0;
+    do
+    {
+      W25QXX.SPI_FLASH_BufferRead(&PIC.name[j], PIC_NAME_ADDR + tmp_cnt, 1);
+      tmp_cnt++;
+    }while (PIC.name[j++] != '\0');
+
+    if ((strcmp((char*)Pname, (char*)PIC.name)) == 0) {
+
+      if ((DeviceCode == 0x9488) || (DeviceCode == 0x5761))
+        addr = PIC_DATA_ADDR_TFT35 + i * PER_PIC_MAX_SPACE_TFT35;
+      else
+        addr = PIC_DATA_ADDR_TFT32 + i * PER_PIC_MAX_SPACE_TFT32;
+      return (addr + 4);//The purpose of adding 4 is to remove 4-byte picture header information.
+    }
+  }
+
+  return addr;
+}
+
+const char *picPath = "mks_pic";
+const char *bakPath = "bak_pic";
+
+const char *fontPath = "mks_font";
+const char *bakFont = "bak_font";
+
+#if 1
+
+void spiFlashErase_PIC() {
+  #if 1
+    volatile uint32_t pic_sectorcnt = 0;
+
+    //LCD_Clear(BACK_COLOR);
+    //LCD_DisplayString(90,80,"SPI Flash");
+    //LCD_DisplayString(120,90,"PIC Erasing...");
+    if ((DeviceCode == 0x9488) || (DeviceCode == 0x5761)) {
+      //LCD_ShowString(180,100,200,24,24,"SPI Flash");
+      //LCD_ShowString(170,130,200,24,24,"PIC Erasing...");
+    }
+    else {
+      //LCD_ShowString(100,90,200,24,24,"SPI Flash");
+      //LCD_ShowString(100,120,200,24,24,"PIC Erasing...");
+    }
+    #if ENABLED(MKS_TEST)
+      for (pic_sectorcnt = 0; pic_sectorcnt < 2; pic_sectorcnt++)
+        W25QXX.SPI_FLASH_BlockErase(PICINFOADDR + pic_sectorcnt * 64 * 1024);
+
+    #else
+      for (pic_sectorcnt = 0; pic_sectorcnt < PIC_SIZE_xM * 1024 / 64; pic_sectorcnt++)
+        W25QXX.SPI_FLASH_BlockErase(PICINFOADDR + pic_sectorcnt * 64 * 1024);
+
+    #endif
+    /*
+    FLASH_Unlock();
+    spiFlashEraseFlag = SPI_FLASH_ERASE_FLAG_DATA;
+    FLASH_ProgramHalfWord(SPI_FLASH_ERASE_FLAG_ADDR,spiFlashEraseFlag);
+    FLASH_Lock();
+    */
+    #if 0
+      if (DeviceCode == 0x9488)
+        LCD_ShowString(170, 130, 200, 24, 24, "PIC Erase Done");
+      else
+        LCD_ShowString(100, 120, 200, 24, 24, "PIC Erase Done");
+
+    #endif
+    //spiFlashEraseFlag = 1;
+  #endif
+}
+
+void spiFlashErase_FONT() {
+  volatile uint32_t Font_sectorcnt = 0;
+
+  //LCD_Clear(BACK_COLOR);
+  if ((DeviceCode == 0x9488) || (DeviceCode == 0x5761)) {
+    //LCD_ShowString(180,100,200,24,24,"SPI Flash");
+    //LCD_ShowString(170,130,200,24,24,"FONT Erasing...");
+  }
+  else {
+    //LCD_ShowString(100,90,200,24,24,"SPI Flash");
+    //LCD_ShowString(90,120,200,24,24,"FONT Erasing...");
+  }
+
+  for (Font_sectorcnt = 0; Font_sectorcnt < FONT_SIZE_xM * 1024 / 64; Font_sectorcnt++)
+    W25QXX.SPI_FLASH_BlockErase(FONTINFOADDR + Font_sectorcnt * 64 * 1024);
+
+  /*
+  FLASH_Unlock();
+  spiFlashEraseFlag = SPI_FLASH_ERASE_FLAG_DATA;
+  FLASH_ProgramHalfWord(SPI_FLASH_ERASE_FLAG_ADDR,spiFlashEraseFlag);
+  FLASH_Lock();
+  */
+  #if 0
+    if (DeviceCode == 0x9488)
+      LCD_ShowString(170, 130, 200, 24, 24, "FONT Erase Done");
+    else
+      LCD_ShowString(90, 120, 200, 24, 24, "FONT Erase Done");
+    //LCD_DisplayString(120,90,"FONT Erase Done");
+  #endif
+  //spiFlashEraseFlag = 1;
+}
+
+uint32_t LogoWrite_Addroffset = 0;
+
+uint8_t Pic_Logo_Write(uint8_t *LogoName, uint8_t *Logo_Wbuff, uint32_t LogoWriteSize) {
+  //uint16_t n;
+  uint32_t i;
+  uint8_t temp1;
+  static uint32_t logo_maxsize;
+
+  if (LogoWriteSize <= 0) return 0;
+
+  W25QXX.SPI_FLASH_BufferWrite(Logo_Wbuff, PIC_LOGO_ADDR + LogoWrite_Addroffset, LogoWriteSize);
+
+  for (i = 0; i < LogoWriteSize; i++) {
+    W25QXX.SPI_FLASH_BufferRead(&temp1, PIC_LOGO_ADDR + LogoWrite_Addroffset + i, 1);
+    if (*(Logo_Wbuff + i) != temp1) return 0;
+  }
+  LogoWrite_Addroffset += LogoWriteSize;
+  if ((DeviceCode == 0x9488) || (DeviceCode == 0x5761))
+    logo_maxsize = LOGO_MAX_SIZE_TFT35;
+  else
+    logo_maxsize = LOGO_MAX_SIZE_TFT32;
+  if (LogoWrite_Addroffset >= logo_maxsize)
+    LogoWrite_Addroffset = 0;
+  return 1;
+}
+
+uint32_t TitleLogoWrite_Addroffset = 0;
+uint8_t Pic_TitleLogo_Write(uint8_t *TitleLogoName, uint8_t *TitleLogo_Wbuff, uint32_t TitleLogoWriteSize) {
+  //uint32_t i;
+  //uint8_t temp1;
+  if (TitleLogoWriteSize <= 0)
+    return 0;
+  if ((DeviceCode == 0x9488) || (DeviceCode == 0x5761))
+    W25QXX.SPI_FLASH_BufferWrite(TitleLogo_Wbuff, PIC_ICON_LOGO_ADDR_TFT35 + TitleLogoWrite_Addroffset, TitleLogoWriteSize);
+  else
+    W25QXX.SPI_FLASH_BufferWrite(TitleLogo_Wbuff, PIC_ICON_LOGO_ADDR_TFT32 + TitleLogoWrite_Addroffset, TitleLogoWriteSize);
+  TitleLogoWrite_Addroffset += TitleLogoWriteSize;
+  if (TitleLogoWrite_Addroffset >= TITLELOGO_MAX_SIZE)
+    TitleLogoWrite_Addroffset = 0;
+  return 1;
+}
+
+uint32_t default_view_addroffset_r = 0;
+void default_view_Write(uint8_t *default_view__Rbuff, uint32_t default_view_Writesize) {
+  W25QXX.SPI_FLASH_BufferWrite(default_view__Rbuff, DEFAULT_VIEW_ADDR_TFT35 + default_view_addroffset_r, default_view_Writesize);
+  default_view_addroffset_r += default_view_Writesize;
+  if (default_view_addroffset_r >= DEFAULT_VIEW_MAX_SIZE)
+    default_view_addroffset_r = 0;
+}
+
+uint32_t Pic_Info_Write(uint8_t *P_name, uint32_t P_size) {
+  uint8_t pic_counter = 0;
+  uint32_t Pic_SaveAddr;
+  uint32_t Pic_SizeSaveAddr;
+  uint32_t Pic_NameSaveAddr;
+  //uint8_t temp;
+  uint8_t Pname_temp;
+  uint32_t i, j;
+  uint32_t name_len = 0;
+  uint32_t SaveName_len = 0;
+  union union32 size_tmp;
+  //union union32 size1;
+  //uint8_t Pn[PIC_NAME_MAX_LEN];
+  //uint8_t cnt_temp;
+  //uint16_t n0;
+  //uint32_t Name_saveAddr = 0;
+  //uint8_t pic_position;
+
+  W25QXX.SPI_FLASH_BufferRead(&pic_counter, PIC_COUNTER_ADDR, 1);
+
+  if (pic_counter == 0xFF)
+    pic_counter = 0;
+
+  if ((DeviceCode == 0x9488) || (DeviceCode == 0x5761))
+    Pic_SaveAddr = PIC_DATA_ADDR_TFT35 + pic_counter * PER_PIC_MAX_SPACE_TFT35;
+  else
+    Pic_SaveAddr = PIC_DATA_ADDR_TFT32 + pic_counter * PER_PIC_MAX_SPACE_TFT32;
+
+  for (j = 0; j < pic_counter; j++) {
+    do {
+      W25QXX.SPI_FLASH_BufferRead(&Pname_temp, PIC_NAME_ADDR + SaveName_len, 1);
+      SaveName_len++;
+    } while (Pname_temp != '\0');
+  }
+  i = 0;
+  while ((*(P_name + i) != '\0')) {
+    i++;
+    name_len++;
+  }
+
+  Pic_NameSaveAddr = PIC_NAME_ADDR + SaveName_len;
+  W25QXX.SPI_FLASH_BufferWrite(P_name, Pic_NameSaveAddr, name_len + 1);
+  Pic_SizeSaveAddr = PIC_SIZE_ADDR + 4 * pic_counter;
+  size_tmp.dwords = P_size;
+  W25QXX.SPI_FLASH_BufferWrite(size_tmp.bytes, Pic_SizeSaveAddr, 4);
+
+  pic_counter++;
+  W25QXX.SPI_FLASH_SectorErase(PIC_COUNTER_ADDR);
+  W25QXX.SPI_FLASH_BufferWrite(&pic_counter, PIC_COUNTER_ADDR, 1);
+
+  return Pic_SaveAddr;
+}
+
+uint8_t public_buf[512];
+
+//uint8_t public_buf_test[512];
+  #if ENABLED(SDSUPPORT)
+void UpdatePic() {
+  //int r;
+  //unsigned char *p;
+  //char rootPath[10]={0};
+  char *fn;
+  unsigned char logoFlag;
+  uint16_t pbr;
+  uint32_t pfileSize;
+  uint32_t Pic_Write_Addr;
+  /*----------------------------------*/
+
+  // FILINFO fno;
+  //DIR dir;
+  //char tmp[30];
+  #if 0//_USE_LFN
+    static char lfn[_MAX_LFN + 1];
+    finfo.lfname = lfn;
+    finfo.lfsize = sizeof(lfn);
+  #endif
+  //SdFile curDir;
+  //if (f_opendir(&dirs, picPath) == FR_OK)
+  //card.cd(picPath);
+
+  //const uint16_t fileCnt = card.get_num_Files();
+
+  //SdFile *curDir;
+  //SdFile dir;
+  //dir.open(picPath, O_READ);
+  //const char * const fname = card.diveToFile(true, curDir, picPath);
+  //if (!fname) return;
+
+  SdFile dir, root = card.getroot();
+  if (dir.open(&root, picPath, O_RDONLY)) {
+
+    disp_pic_update();
+    spiFlashErase_PIC();
+
+    dir_t d;
+    while (dir.readDir(&d, card.longFilename) > 0) {
+      #if 1
+        /*
+        if (power_det == 0) {
+          PW_DET_ON;
+          power_det=0;
+        }
+        SPI_FLASH_Init();
+        */
+
+        //for (uint16_t i = 0; i < fileCnt; i++) {
+        //res = f_readdir(&dirs, &finfo);
+        //card.getfilename_sorted(i);
+
+        if (card.longFilename[0] == 0)
+          break;
+        /*if ( card.filename[0] == '.')
+        continue;
+      */
+        if (card.longFilename[0] == '.')
+          continue;
+
+        fn = card.longFilename;
+
+        /*if ((finfo.lfname[0] == 0) || (finfo.lfname == 0))
+          fn = finfo.fname;
+        else
+          fn = finfo.lfname;*/
+
+        /*   if (fno.fattrib & AM_DIR)
+        {
+          continue;
+        }
+        else */
+        //{
+        //if ((strstr(fn, ".gco")) || (strstr(fn, ".GCO")) || (fno.fattrib & AM_DIR))
+        if (strstr(fn, ".bin")) {
+          if (strstr(fn, "_logo"))
+            logoFlag = 1;
+          else if (strstr(fn, "_titlelogo"))
+            logoFlag = 2;
+          else if (strstr(fn, "_preview"))
+            logoFlag = 3;
+          else
+            logoFlag = 0;
+
+          //public_buf[0] = '\0';
+          //strcat(public_buf, picPath);
+          //strcat(public_buf, "/");
+          char dosFilename[FILENAME_LENGTH];
+          createFilename(dosFilename, d);
+          //strcat(public_buf, dosFilename);
+
+          SdFile file;
+          if (file.open(&dir, dosFilename, O_READ)) {
+            #if 1
+            /*LCD_Clear(BACK_COLOR);
+
+            if ((DeviceCode==0x9488)||(DeviceCode==0x5761)) {
+              LCD_ShowString(170,100,200,24,24,(u8 *)fn);
+              LCD_ShowString(180,130,200,24,24,"Updating...");
+            }
+            else {
+              LCD_ShowString(90,90,200,24,24,(u8 *)fn);
+              LCD_ShowString(90,120,200,24,24,"Updating...");
+            }
+            */
+            if (logoFlag == 1) {
+              while (1) {
+                pbr = file.read(public_buf, BMP_WRITE_BUF_LEN);
+                Pic_Logo_Write((uint8_t *)fn, public_buf, pbr); //
+                if (pbr < BMP_WRITE_BUF_LEN) break;
+              }
+            }
+            else if (logoFlag == 2) {
+              while (1) {
+                pbr = file.read(public_buf, BMP_WRITE_BUF_LEN);
+                Pic_TitleLogo_Write((uint8_t *)fn, public_buf, pbr); //
+                if (pbr < BMP_WRITE_BUF_LEN) break;
+              }
+            }
+            else if (logoFlag == 3) {
+              while (1)
+              {
+                pbr = file.read(public_buf, BMP_WRITE_BUF_LEN);
+                default_view_Write(public_buf, pbr); //
+                if (pbr < BMP_WRITE_BUF_LEN) break;
+              }
+            }
+            else {
+              pfileSize = file.fileSize();
+              Pic_Write_Addr = Pic_Info_Write((uint8_t *)fn, pfileSize);
+              //uint32_t addr_test = Pic_Write_Addr;
+              //memset(bmp_public_buf, 0xff, BMP_WRITE_BUF_LEN);
+              while (1)
+              {
+                pbr = file.read(public_buf, BMP_WRITE_BUF_LEN);
+                W25QXX.SPI_FLASH_BufferWrite(public_buf, Pic_Write_Addr, pbr);
+                Pic_Write_Addr += pbr;
+                if (pbr < BMP_WRITE_BUF_LEN) break;
+              }
+              //W25QXX.SPI_FLASH_BufferRead(public_buf_test,addr_test,BMP_WRITE_BUF_LEN);
+            }
+
+            /*--------------read test--------------------*/
+            /*
+            BufferSet(picBuffer, 0xff, PICTURE_MAX_SIZE);
+            if (logoFlag == 0)
+            {
+              PicMsg_Init();
+              Pic_Read(fn,picBuffer);
+            }
+            else
+              Pic_Logo_Read(fn,picBuffer,PICTURE_MAX_SIZE);
+            */
+            /*--------------read test--------------------*/
+
+            file.close();
+            #endif
+          }
+
+        }
+        //}
+        //}
+        /*
+            LCD_Clear(LCD_COLOR_BLACK);
+            //LCD_ShowString(110,100,200,24,24,"Complete");
+            LCD_DisplayString(110,80,"Complete");
+            delay(0xfffff);
+        */
+        //r = f_chdir("/");
+        #if 1
+          //SdFile dir, root = card.getroot();
+          /*if (dir.open(&root, bakPath, O_RDONLY))
+      {
+        dir.remove();
+      }*/
+
+          //r = f_rename(picPath, bakPath);
+
+
+          //update_flag_ok = 1;
+        #endif
+      #endif
+    }
+    dir.rename(&root, bakPath);
+  }
+}
+
+
+void spi_flash_read_test() {W25QXX.SPI_FLASH_BufferRead(public_buf, UNIGBK_FLASH_ADDR, BMP_WRITE_BUF_LEN);}
+
+void UpdateFont() {
+  //int r;
+  //unsigned char *p;
+  //char rootPath[10]={0};
+  char *fn;
+  //unsigned char logoFlag;
+  uint16_t pbr;
+  uint32_t flashaddr = 0;
+  //uint32_t pfileSize;
+  //uint32_t Pic_Write_Addr;
+  /*----------------------------------*/
+
+  // FILINFO fno;
+  //DIR dir;
+  //char tmp[30];
+  #if 0//_USE_LFN
+    static char lfn[_MAX_LFN + 1];
+    finfo.lfname = lfn;
+    finfo.lfsize = sizeof(lfn);
+  #endif
+  //SdFile curDir;
+  //if (f_opendir(&dirs, picPath) == FR_OK)
+  //card.cd(picPath);
+
+  //const uint16_t fileCnt = card.get_num_Files();
+
+  //SdFile *curDir;
+  //SdFile dir;
+  //dir.open(picPath, O_READ);
+  //const char * const fname = card.diveToFile(true, curDir, picPath);
+  //if (!fname) return;
+
+  SdFile dir, root = card.getroot();
+  if (dir.open(&root, fontPath, O_RDONLY)) {
+
+    disp_font_update();
+    spiFlashErase_FONT();
+
+    dir_t d;
+    while (dir.readDir(&d, card.longFilename) > 0)
+    {
+      #if 1
+        /*if (power_det == 0)
+        {
+          PW_DET_ON;
+          power_det=0;
+        }
+        SPI_FLASH_Init();*/
+
+
+        //for (uint16_t i = 0; i < fileCnt; i++)
+        //{
+        //res = f_readdir(&dirs, &finfo);
+        //card.getfilename_sorted(i);
+
+        if (card.longFilename[0] == 0)
+          break;
+        /*if ( card.filename[0] == '.')
+        continue;
+      */
+        if (card.longFilename[0] == '.')
+          continue;
+
+        fn = card.longFilename;
+
+        /*if ((finfo.lfname[0] == 0) || (finfo.lfname == 0))
+          fn = finfo.fname;
+        else
+          fn = finfo.lfname;*/
+
+        /*   if (fno.fattrib & AM_DIR)
+        {
+        continue;
+        }
+        else */
+        //{
+        //if ((strstr(fn, ".gco")) || (strstr(fn, ".GCO")) || (fno.fattrib & AM_DIR))
+        if (strstr(fn, ".bin")) {
+          char dosFilename[FILENAME_LENGTH];
+          createFilename(dosFilename, d);
+          //strcat(public_buf, dosFilename);
+
+          SdFile file;
+          if (file.open(&dir, dosFilename, O_READ)) {
+
+            #if 1
+              /*LCD_Clear(BACK_COLOR);
+
+              if ((DeviceCode==0x9488)||(DeviceCode==0x5761))
+              {
+                LCD_ShowString(170,100,200,24,24,(u8 *)fn);
+                LCD_ShowString(180,130,200,24,24,"Updating...");
+              }
+              else
+              {
+                LCD_ShowString(90,90,200,24,24,(u8 *)fn);
+                LCD_ShowString(90,120,200,24,24,"Updating...");
+              }
+              */
+              flashaddr = UNIGBK_FLASH_ADDR;
+              pbr = 0;
+              while (1)
+              {
+                flashaddr += pbr;
+                pbr = file.read(public_buf, BMP_WRITE_BUF_LEN);
+                W25QXX.SPI_FLASH_BufferWrite(public_buf, flashaddr, pbr);
+                //W25QXX.SPI_FLASH_BufferRead(public_buf_test,flashaddr,pbr);
+                /*if (UNIGBKFlag == 1)
+                {
+                  fontrate = (uint16_t)(((float)(flashaddr - UNIGBK_FLASH_ADDR)/(float)(psrc.fsize))*100);
+                }
+                else
+                {
+                  fontrate = (uint16_t)(((float)(flashaddr - GBK_FLASH_ADDR)/(float)(psrc.fsize))*100);
+                }
+
+                if (fontrate > 99) fontrate=99;
+
+                if (fontrate < 10)
+                {
+                  fontString[0] = fontrate%10 + 0x30;
+                  fontString[1] = '%';
+                  fontString[2] = '\0';
+                }
+                else
+                {
+                  fontString[0] = fontrate/10 + 0x30;
+                  fontString[1] = fontrate%10 + 0x30;
+                  fontString[2] = '%';
+                  fontString[3] = '\0';
+                }*/
+                //LCD_DisplayString(140,130,fontString);
+                if ((DeviceCode == 0x9488) || (DeviceCode == 0x5761)) {
+                  //LCD_ShowString(200,160,200,24,24,fontString);
+                }
+                else {
+                  //LCD_ShowString(140,150,200,24,24,fontString);
+                }
+                if (pbr < BMP_WRITE_BUF_LEN) break;
+              }
+              /*--------------read test--------------------*/
+              /*
+              BufferSet(picBuffer, 0xff, PICTURE_MAX_SIZE);
+              if (logoFlag == 0)
+              {
+                PicMsg_Init();
+                Pic_Read(fn,picBuffer);
+              }
+              else
+                Pic_Logo_Read(fn,picBuffer,PICTURE_MAX_SIZE);
+              */
+              /*--------------read test--------------------*/
+
+              file.close();
+            #endif
+          }
+
+        }
+        //}
+        //}
+        /*
+            LCD_Clear(LCD_COLOR_BLACK);
+            //LCD_ShowString(110,100,200,24,24,"Complete");
+            LCD_DisplayString(110,80,"Complete");
+            delay(0xfffff);
+        */
+        //r = f_chdir("/");
+        #if 1
+          //SdFile dir, root = card.getroot();
+          /*if (dir.open(&root, bakPath, O_RDONLY))
+      {
+        dir.remove();
+      }*/
+          dir.rename(&root, bakFont);
+          //r = f_rename(picPath, bakPath);
+
+
+          //update_flag_ok = 1;
+        #endif
+      #endif
+    }
+  }
+}
+  #endif // SDSUPPORT
+
+#endif
+
+#if 1
+
+void Pic_Read(uint8_t *Pname, uint8_t *P_Rbuff) {
+  uint8_t i, j;
+  uint8_t Pic_cnt;
+  uint32_t tmp_cnt = 0;
+  PIC_MSG PIC;
+
+  //void SPI_FLASH_BufferRead(u8* pBuffer, u32 ReadAddr, u16 NumByteToRead);
+
+  W25QXX.SPI_FLASH_BufferRead(&Pic_cnt, PIC_COUNTER_ADDR, 1);
+  if (Pic_cnt == 0xff)
+    Pic_cnt = 0;
+
+  for (i = 0; i < Pic_cnt; i++) {
+    //pic name
+    j = 0;
+    do
+    {
+      W25QXX.SPI_FLASH_BufferRead(&PIC.name[j], PIC_NAME_ADDR + tmp_cnt, 1);
+      tmp_cnt++;
+    }while (PIC.name[j++] != '\0');
+    //pic size
+    W25QXX.SPI_FLASH_BufferRead(PIC.size.bytes, PIC_SIZE_ADDR + i * 4, 4);
+
+    if ((strcmp((char*)Pname, (char*)PIC.name)) == 0) {
+      W25QXX.SPI_FLASH_BufferRead((uint8_t *)P_Rbuff, PIC_DATA_ADDR_TFT35 + i * PER_PIC_MAX_SPACE_TFT35, PIC.size.dwords);
+      /*if (DMA_ERRO_FLAG)
+      {
+        DMA_ERRO_FLAG = 0;
+        SPI_FLASH_BufferRead((uint8_t *)P_Rbuff,PIC_DATA_ADDR+i*PER_PIC_MAX_SPACE,PIC.size.dwords);
+      }*/
+      break;
+    }
+  }
+}
+
+void lv_pic_test(uint8_t *P_Rbuff, uint32_t addr, uint32_t size) {
+  W25QXX.init(SPI_QUARTER_SPEED);
+  W25QXX.SPI_FLASH_BufferRead((uint8_t *)P_Rbuff, addr, size);
+  /*if (DMA_ERRO_FLAG) {
+    DMA_ERRO_FLAG = 0;
+    SPI_FLASH_BufferRead((uint8_t *)P_Rbuff,addr,size);
+  }*/
+
+}
+
+void get_spi_flash_data(const char *rec_buf, int addr, int size) {
+  W25QXX.init(SPI_QUARTER_SPEED);
+  W25QXX.SPI_FLASH_BufferRead((uint8_t *)rec_buf, UNIGBK_FLASH_ADDR + addr, size);
+}
+
+#endif
+
+#if 1
+
+  uint32_t logo_addroffset = 0;
+  void Pic_Logo_Read(uint8_t *LogoName, uint8_t *Logo_Rbuff, uint32_t LogoReadsize) {
+    W25QXX.SPI_FLASH_BufferRead(Logo_Rbuff, PIC_LOGO_ADDR + logo_addroffset, LogoReadsize);
+    logo_addroffset += LogoReadsize;
+    if (logo_addroffset >= LOGO_MAX_SIZE_TFT35)
+      logo_addroffset = 0;
+  }
+
+  uint32_t default_view_addroffset = 0;
+  void default_view_Read(uint8_t *default_view_Rbuff, uint32_t default_view_Readsize) {
+    W25QXX.init(SPI_QUARTER_SPEED);
+
+    W25QXX.SPI_FLASH_BufferRead(default_view_Rbuff, DEFAULT_VIEW_ADDR_TFT35 + default_view_addroffset + 4, default_view_Readsize);
+    default_view_addroffset += default_view_Readsize;
+    if (default_view_addroffset >= DEFAULT_VIEW_MAX_SIZE)
+      default_view_addroffset = 0;
+
+  }
+
+  uint32_t flash_view_addroffset = 0;
+  void flash_view_Read(uint8_t *flash_view_Rbuff, uint32_t flash_view_Readsize) {
+    W25QXX.init(SPI_QUARTER_SPEED);
+
+    W25QXX.SPI_FLASH_BufferRead(flash_view_Rbuff, BAK_VIEW_ADDR_TFT35 + flash_view_addroffset, flash_view_Readsize);
+    flash_view_addroffset += flash_view_Readsize;
+    if (flash_view_addroffset >= FLASH_VIEW_MAX_SIZE)
+      flash_view_addroffset = 0;
+
+  }
+
+#endif
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h

@@ -0,0 +1,120 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+#include <stdint.h>
+#include <string.h>
+#include "lvgl.h"
+
+#if 1
+
+  #define PIC_MAX_CN           100    // Maximum number of pictures
+  #define PIC_NAME_MAX_LEN      50    // Picture name maximum length
+
+  #define LOGO_MAX_SIZE_TFT35             (300*1024)
+  #define LOGO_MAX_SIZE_TFT32             (150*1024)
+  #define TITLELOGO_MAX_SIZE              (150*1024) // Little logo maximum
+  #define DEFAULT_VIEW_MAX_SIZE           (200*200*2)
+  #define FLASH_VIEW_MAX_SIZE             (200*200*2)
+
+  #define PER_PIC_MAX_SPACE_TFT35         (32*1024)
+  #define PER_PIC_MAX_SPACE_TFT32         (16*1024)
+  #define PER_FONT_MAX_SPACE              (16*1024)
+
+  //pic
+  //Robin_pro pic addr
+  #define PIC_NAME_ADDR                   0x003000      // Pic information addr
+  #define PIC_SIZE_ADDR                   0x007000      // Pic size information addr
+  #define PIC_COUNTER_ADDR                0x008000      // Pic total number
+  #define PER_PIC_SAVE_ADDR               0x009000      // Storage address of each picture
+  #define PIC_LOGO_ADDR                   0x00A000      // Logo addr
+  //#define PIC_DATA_ADDR                   0x02F000    //
+
+  // TFT35
+  #define DEFAULT_VIEW_ADDR_TFT35                         0XC5800
+  #define BAK_VIEW_ADDR_TFT35                                             (DEFAULT_VIEW_ADDR_TFT35+90*1024)
+  #define PIC_ICON_LOGO_ADDR_TFT35            (BAK_VIEW_ADDR_TFT35+80*1024)
+  #define PIC_DATA_ADDR_TFT35                                             (PIC_ICON_LOGO_ADDR_TFT35+350*1024)//0XC5800
+
+  // TFT32
+  #define PIC_DATA_ADDR_TFT32             0x02F000
+  #define PIC_ICON_LOGO_ADDR_TFT32        0x5D8000
+  #define PIC_OTHER_SIZE_ADDR_TFT32       0x5EE000
+
+  // font
+  #define FONTINFOADDR                    0x600000 // 6M -- font addr
+  #define UNIGBK_FLASH_ADDR              (FONTINFOADDR+4096) // 4*1024
+  #define GBK_FLASH_ADDR                 (UNIGBK_FLASH_ADDR+180224) // 176*1024
+
+  // Flash flag
+  #define FLASH_INF_VALID_FLAG            0xAA558761
+  // SD card information first addr
+  #define VAR_INF_ADDR                    0x000000
+
+  union union32 {
+    uint8_t bytes[4];
+    uint32_t dwords;
+  };
+
+  // pic information
+  struct pic_msg {
+    uint8_t name[PIC_NAME_MAX_LEN];
+    union union32 size;
+  };
+
+  typedef struct pic_msg PIC_MSG;
+
+  #define BMP_WRITE_BUF_LEN 512
+
+  #define PICINFOADDR   0
+
+  #define PIC_SIZE_xM   6
+  #define FONT_SIZE_xM  2
+
+  //extern void PicMsg_Init(void);
+  extern void Pic_Read(uint8_t *Pname, uint8_t *P_Rbuff);
+  //extern void bindBmpFileData(const uint8_t **pBuf, uint8_t *pName);
+  //extern void Pic_Logo_Read(uint8_t *LogoName,uint8_t *Logo_Rbuff,uint32_t LogoReadsize);
+  //extern void default_view_Read(uint8_t *default_view_Rbuff,uint32_t default_view_Readsize);
+  //extern void flash_view_Read(uint8_t *flash_view_Rbuff,uint32_t flash_view_Readsize);
+
+  //extern void lv_Pic_Read(uint8_t *Pname,uint8_t *P_Rbuff,uint32_t addr,uint32_t size);
+  extern void lv_pic_test(uint8_t *P_Rbuff, uint32_t addr, uint32_t size);
+
+#endif
+
+extern uint32_t lv_get_pic_addr(uint8_t *Pname);
+
+extern void get_spi_flash_data(const char *rec_buf, int offset, int size);
+//extern void SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead);
+
+extern void spi_flash_read_test();
+extern void default_view_Read(uint8_t *default_view_Rbuff, uint32_t default_view_Readsize);
+extern void flash_view_Read(uint8_t *flash_view_Rbuff, uint32_t flash_view_Readsize);
+
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/printer_opration.cpp

@@ -0,0 +1,218 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+  #include "../../../../MarlinCore.h"
+
+  #include "lv_conf.h"
+  #include "draw_ui.h"
+  #include "../../../../module/temperature.h"
+  #include "../../../../module/motion.h"
+  #include "../../../../sd/cardreader.h"
+  #include "../../../../gcode/queue.h"
+
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    #include "../../../../feature/powerloss.h"
+  #endif
+
+  #include "../../../../gcode/gcode.h"
+  #include "../../../../module/planner.h"
+
+  extern uint32_t To_pre_view;
+  extern uint8_t flash_preview_begin, default_preview_flg, gcode_preview_over;
+
+  void printer_state_polling() {
+    if (uiCfg.print_state == PAUSING) {
+      #if ENABLED(SDSUPPORT)
+        if (!planner.has_blocks_queued() && card.getIndex() > MIN_FILE_PRINTED) //<2F><><EFBFBD><EFBFBD> <20>ļ<EFBFBD><C4BC><EFBFBD> M109<30><39>M190ָ<30><D6B8>
+          uiCfg.waitEndMoves++;
+
+        if (uiCfg.waitEndMoves > 20) {
+          uiCfg.waitEndMoves = 0;
+          planner.synchronize();
+          gcode.process_subcommands_now_P(PSTR("M25"));
+          gcode.process_subcommands_now_P(PSTR("G91"));
+          gcode.process_subcommands_now_P(PSTR("G1 Z5"));
+          gcode.process_subcommands_now_P(PSTR("G90"));
+
+          uiCfg.print_state = PAUSED;
+
+          //#if ENABLED(POWER_LOSS_RECOVERY)
+          //  if (recovery.enabled) recovery.save(true);
+          //#endif
+          gCfgItems.pause_reprint = 1;
+          update_spi_flash();
+        }
+      #endif
+    }
+    else {
+      uiCfg.waitEndMoves = 0;
+    }
+
+    if (uiCfg.print_state == PAUSED) {
+
+    }
+
+    if (uiCfg.print_state == RESUMING) {
+      if (IS_SD_PAUSED()) {
+        gcode.process_subcommands_now_P(PSTR("G91"));
+        gcode.process_subcommands_now_P(PSTR("G1 Z-5"));
+        gcode.process_subcommands_now_P(PSTR("G90"));
+        gcode.process_subcommands_now_P(PSTR("M24"));
+        uiCfg.print_state = WORKING;
+        start_print_time();
+
+        gCfgItems.pause_reprint = 0;
+        update_spi_flash();
+      }
+    }
+    #if ENABLED(POWER_LOSS_RECOVERY)
+    if (uiCfg.print_state == REPRINTED) {
+      memset(public_buf_m, 0, sizeof(public_buf_m));
+      #if HOTENDS
+      HOTEND_LOOP() {
+        const int16_t et = recovery.info.target_temperature[e];
+        if (et) {
+          #if HOTENDS > 1
+            sprintf_P(public_buf_m, PSTR("T%i"), e);
+            gcode.process_subcommands_now(public_buf_m);
+          #endif
+          sprintf_P(public_buf_m, PSTR("M109 S%i"), et);
+          gcode.process_subcommands_now(public_buf_m);
+        }
+      }
+      #endif
+
+      if (gCfgItems.pause_reprint == 1) {
+        gcode.process_subcommands_now_P(PSTR("G91"));
+        gcode.process_subcommands_now_P(PSTR("G1 Z-5"));
+        gcode.process_subcommands_now_P(PSTR("G90"));
+      }
+      recovery.resume();
+
+      uiCfg.print_state = WORKING;
+      start_print_time();
+
+      gCfgItems.pause_reprint = 0;
+      update_spi_flash();
+    }
+    #endif
+
+    if (uiCfg.print_state == WORKING)
+      filament_check();
+  }
+
+  void filament_pin_setup() {
+    #if PIN_EXISTS(MT_DET_1)
+      pinMode(MT_DET_1_PIN, INPUT_PULLUP);
+    #endif
+    #if PIN_EXISTS(MT_DET_2)
+      pinMode(MT_DET_2_PIN, INPUT_PULLUP);
+    #endif
+    #if PIN_EXISTS(MT_DET_3)
+      pinMode(MT_DET_3_PIN, INPUT_PULLUP);
+    #endif
+  }
+
+  void filament_check() {
+    const int FIL_DELAY = 20;
+    #if PIN_EXISTS(MT_DET_1)
+      static int fil_det_count_1 = 0;
+      if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING)
+        fil_det_count_1++;
+      else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING)
+        fil_det_count_1++;
+      else if (fil_det_count_1 > 0)
+        fil_det_count_1--;
+
+      if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING)
+        fil_det_count_1++;
+      else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING)
+        fil_det_count_1++;
+      else if (fil_det_count_1 > 0)
+        fil_det_count_1--;
+    #endif
+
+    #if PIN_EXISTS(MT_DET_2)
+      static int fil_det_count_2 = 0;
+      if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING)
+        fil_det_count_2++;
+      else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING)
+        fil_det_count_2++;
+      else if (fil_det_count_2 > 0)
+        fil_det_count_2--;
+
+      if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING)
+        fil_det_count_2++;
+      else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING)
+        fil_det_count_2++;
+      else if (fil_det_count_2 > 0)
+        fil_det_count_2--;
+    #endif
+
+    #if PIN_EXISTS(MT_DET_3)
+      static int fil_det_count_3 = 0;
+      if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING)
+        fil_det_count_3++;
+      else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING)
+        fil_det_count_3++;
+      else if (fil_det_count_3 > 0)
+        fil_det_count_3--;
+
+      if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING)
+        fil_det_count_3++;
+      else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING)
+        fil_det_count_3++;
+      else if (fil_det_count_3 > 0)
+        fil_det_count_3--;
+    #endif
+
+    if (
+      #if PIN_EXISTS(MT_DET_1)
+        fil_det_count_1 >= FIL_DELAY
+      #else
+        false
+      #endif
+      #if PIN_EXISTS(MT_DET_2)
+        || fil_det_count_2 >= FIL_DELAY
+      #endif
+      #if PIN_EXISTS(MT_DET_3)
+        || fil_det_count_3 >= FIL_DELAY
+      #endif
+      ) {
+      clear_cur_ui();
+      card.pauseSDPrint();
+      stop_print_time();
+      uiCfg.print_state = PAUSING;
+
+      if (gCfgItems.from_flash_pic == 1)
+        flash_preview_begin = 1;
+      else
+        default_preview_flg = 1;
+
+      lv_draw_printing();
+    }
+  }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/printer_opration.h

@@ -0,0 +1,36 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+#define MIN_FILE_PRINTED   100 //5000
+
+extern void printer_state_polling();
+extern void filament_pin_setup();
+extern void filament_check();
+
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_en.h

@@ -0,0 +1,718 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//****************英文***************************//
+#define MACHINE_CONFIG_EN              "Machine\nSettings"
+
+#define NEXT_EN                 "Next"
+#define PREVIOUS_EN             "Previous"
+#define DEFAULT_EN              "Default"
+#define KEY_BACK_EN             "Del"
+#define KEY_REST_EN             "Rest"
+#define KEY_CONFIRM_EN          "Confirm"
+
+#define KEYBOARD_KEY0_EN "0"
+#define KEYBOARD_KEY1_EN "1"
+#define KEYBOARD_KEY2_EN "2"
+#define KEYBOARD_KEY3_EN "3"
+#define KEYBOARD_KEY4_EN "4"
+#define KEYBOARD_KEY5_EN "5"
+#define KEYBOARD_KEY6_EN "6"
+#define KEYBOARD_KEY7_EN "7"
+#define KEYBOARD_KEY8_EN "8"
+#define KEYBOARD_KEY9_EN "9"
+#define KEYBOARD_KEY_POINT_EN "."
+#define KEYBOARD_KEY_NEGATIVE_EN "-"
+
+#define MACHINE_PARA_EN             "Machine\nsettings"
+#define MACHINE_PARA_TITLE_EN       "Machine settings"
+#define MACHINE_TYPE_CNOFIG_EN      "Machine"
+#define TEMPERATURE_CONFIG_EN       "Temperature"
+#define MOTOR_CONFIG_EN             "Motor"
+#define ADVANCE_CONFIG_EN           "Adavance"
+
+#define MACHINE_CONFIG_TITLE_EN     "Machine Settings"
+#define MACHINE_TYPE_EN             "Machine type"
+#define MACHINE_STROKE_EN           "Machine Size"
+#define MACHINE_HOMEDIR_EN          "Home direction"
+#define MACHINE_ENDSTOP_TYPE_EN     "Endstop type"
+#define MACHINE_FILAMENT_CONFIG_EN  "Filament settings"
+#define MACHINE_LEVELING_CONFIG_EN  "Leveling settings"
+
+#define MACHINE_TYPE_CONFIG_TITLE_EN    "Machine Settings>Machine type"
+#define MACHINE_TYPE_XYZ_EN             "XYZ Machine"
+#define MACHINE_TYPE_DELTA_EN           "Delta Machine"
+#define MACHINE_TYPE_COREXY_EN          "Corexy Machine"
+
+#define MACHINE_STROKE_CONF_TITLE_EN    "Machine Settings>Machine Size"
+#define X_MAX_LENGTH_EN                 "X-axis maximum stroke"
+#define Y_MAX_LENGTH_EN                 "Y-axis maximum stroke"
+#define Z_MAX_LENGTH_EN                 "Z-axis maximum stroke"
+
+#define X_MIN_LENGTH_EN                 "X-axis minimum stroke"
+#define Y_MIN_LENGTH_EN                 "Y-axis minimum stroke"
+#define Z_MIN_LENGTH_EN                 "Z-axis minimum stroke"
+
+#define HOME_DIR_CONF_TITLE_EN          "Machine Settings>Home direction"
+#define HOME_DIR_X_EN                   "X-axis home direction"
+#define HOME_DIR_Y_EN                   "Y-axis home direction"
+#define HOME_DIR_Z_EN                   "Z-axis home direction"
+#define HOME_MIN_EN                     "MIN"
+#define HOME_MAX_EN                     "MAX"
+
+#define ENDSTOP_CONF_TITLE_EN           "Machine Settings>Endstop type"
+#define MIN_ENDSTOP_X_EN                "X-axis minimum Endstop"
+#define MIN_ENDSTOP_Y_EN                "Y-axis minimum Endstop"
+#define MIN_ENDSTOP_Z_EN                "Z-axis minimum Endstop"
+#define MAX_ENDSTOP_X_EN                "X axis maximum Endstop"
+#define MAX_ENDSTOP_Y_EN                "Y axis maximum Endstop"
+#define MAX_ENDSTOP_Z_EN                "Z axis maximum Endstop"
+#define ENDSTOP_FIL_EN                  "Filament sensor"
+#define ENDSTOP_LEVEL_EN                "Leveling sensor"
+#define ENDSTOP_OPENED_EN               "Open"
+#define ENDSTOP_CLOSED_EN               "Close"
+
+#define FILAMENT_CONF_TITLE_EN          "Filament settings"
+#define FILAMENT_IN_TEMPERATURE_EN      "Load temperature"
+#define FILAMENT_IN_LENGTH_EN           "Load length"
+#define FILAMENT_IN_SPEED_EN            "Load speed"
+#define FILAMENT_OUT_TEMPERATURE_EN     "Unload temperature"
+#define FILAMENT_OUT_LENGTH_EN          "Unload length"
+#define FILAMENT_OUT_SPEED_EN           "Unload speed"
+
+#define LEVELING_CONF_TITLE_EN          "Leveling settings"
+#define LEVELING_PARA_CONF_EN           "Leveling settings"
+#define LEVELING_DELTA_EN               "delta machine leveling"
+#define LEVELING_XYZ_EN                 "Manual leveling coordinate settings"
+
+#define LEVELING_PARA_CONF_TITLE_EN     "leveling setting"
+#define AUTO_LEVELING_ENABLE_EN         "Enable auto leveling"
+#define BLTOUCH_LEVELING_ENABLE_EN      "Enable BLtouch"
+#define PROBE_PORT_EN                   "Probe connector"
+#define PROBE_X_OFFSET_EN               "Probe x axis offset"
+#define PROBE_Y_OFFSET_EN               "Probe y axis offset"
+#define PROBE_Z_OFFSET_EN               "Probe z axis offset"
+#define PROBE_XY_SPEED_EN               "Probe xy axis speed"
+#define PROBE_Z_SPEED_EN                "Probe z axis speed"
+#define ENABLE_EN                       "YES"
+#define DISABLE_EN                      "NO"
+#define Z_MIN_EN                        "ZMin"
+#define Z_MAX_EN                        "ZMax"
+
+#define DELTA_LEVEL_CONF_TITLE_EN       "Delta Machine settings"
+#define DELTA_LEVEL_CONF_EN             "Delta Machine Leveling"
+#define DELTA_MACHINE_RADIUS_EN         "Machine Radius"
+#define DELTA_DIAGONAL_ROD_EN           "Machine rod length"
+#define DELTA_PRINT_RADIUS_EN           "Print radius"
+#define DELTA_HEIGHT_EN                 "Print height"
+#define SMOOTH_ROD_OFFSET_EN            "Slider offset"
+#define EFFECTOR_OFFSET_EN              "Effector offset"
+#define CALIBRATION_RADIUS_EN           "Leveling radius"
+
+#define XYZ_LEVEL_CONF_TITLE_EN         "Cartesian Machine Settings"
+#define PROBE_REACH_MAX_LEFT_EN         "Probe reaches leftmost position"
+#define PROBE_REACH_MAX_RIGHT_EN        "Probe reaches rightmost position"
+#define PROBE_REACH_MAX_FRONT_EN        "Probe reaches front position"
+#define PROBE_REACH_MAX_BACK_EN         "Probe reaches final position"
+
+#define TEMPERATURE_CONF_TITLE_EN       "Machine Settings>Temperature settings"
+#define NOZZLE_CONF_EN                  "Nozzle settings"
+#define HOTBED_CONF_EN                  "Hotbed settings"
+#define PREHEAT_TEMPER_EN               "Preset temperature"
+
+#define NOZZLE_CONF_TITLE_EN            "Machine Settings>Nozzle settings"
+#define NOZZLECNT_EN                    "Number of nozzles"
+#define NOZZLE_TYPE_EN                  "E0 Temperature type"
+#define NOZZLE_ADJUST_TYPE_EN           "PID thermostat"
+#define NOZZLE_MIN_TEMPERATURE_EN       "lowest temperature"
+#define NOZZLE_MAX_TEMPERATURE_EN       "Maximum temperature"
+#define EXTRUD_MIN_TEMPER_EN            "Minimum extrusion temperature"
+
+#define HOTBED_CONF_TITLE_EN            "Machine Settings>Hotbed settings"
+#define HOTBED_ADJUST_EN                "PID thermostat"
+#define HOTBED_MIN_TEMPERATURE_EN       "lowest temperature"
+#define HOTBED_MAX_TEMPERATURE_EN       "Maximum temperature"
+
+#define MOTOR_CONF_TITLE_EN             "Machine Settings>Motor settings"
+#define MAXFEEDRATE_CONF_EN             "Maximum speed settings"
+#define ACCELERATION_CONF_EN            "Acceleration settings"
+#define JERKCONF_EN                     "Jerk settings"
+#define STEPSCONF_EN                    "Steps settings"
+#define MOTORDIRCONF_EN                 "Motor direction settings"
+#define HOMEFEEDRATECONF_EN             "Home speed setting"
+
+#define MAXFEEDRATE_CONF_TITLE_EN       "Machine Settings>Maximum speed"
+#define X_MAXFEEDRATE_EN                "X axis maximum speed"
+#define Y_MAXFEEDRATE_EN                "Y axis maximum speed"
+#define Z_MAXFEEDRATE_EN                "Z axis maximum speed"
+#define E0_MAXFEEDRATE_EN               "E0 axis maximum speed"
+#define E1_MAXFEEDRATE_EN               "E1 axis maximum speed"
+
+#define ACCELERATION_CONF_TITLE_EN      "Machine Settings>Acceleration"
+#define PRINT_ACCELERATION_EN           "Print acceleration"
+#define RETRACT_ACCELERATION_EN         "Retraction acceleration"
+#define TRAVEL_ACCELERATION_EN          "Travel acceleration"
+#define X_ACCELERATION_EN               "X-axis acceleration"
+#define Y_ACCELERATION_EN               "Y-axis acceleration"
+#define Z_ACCELERATION_EN               "Z-axis acceleration"
+#define E0_ACCELERATION_EN              "E0-axis acceleration"
+#define E1_ACCELERATION_EN              "E1-axis acceleration"
+
+#define JERK_CONF_TITLE_EN              "Machine Settings>Jerk speed"
+#define X_JERK_EN                       "X-axis jerk speed"
+#define Y_JERK_EN                       "Y-axis jerk speed"
+#define Z_JERK_EN                       "J-axis jerk speed"
+#define E_JERK_EN                       "E-axis jerk speed"
+
+#define STEPS_CONF_TITLE_EN             "Machine Settings>Steps settings"
+#define X_STEPS_EN                      "X-axis steps"
+#define Y_STEPS_EN                      "Y-axis stepS"
+#define Z_STEPS_EN                      "Z-axis stepS"
+#define E0_STEPS_EN                     "E0-axis steps"
+#define E1_STEPS_EN                     "E1-axis steps"
+
+#define MOTORDIR_CONF_TITLE_EN          "Machine Settings>Motor direction"
+#define X_MOTORDIR_EN                   "X-axis motor direction invert"
+#define Y_MOTORDIR_EN                   "Y-axis motor direction invert"
+#define Z_MOTORDIR_EN                   "Z-axis motor direction invert"
+#define E0_MOTORDIR_EN                  "E0-axis motor direction invert"
+#define E1_MOTORDIR_EN                  "E1-axis motor direction invert"
+#define INVERT_P_EN                     "YES"
+#define INVERT_N_EN                     "NO"
+
+#define HOMEFEEDRATE_CONF_TITLE_EN      "Machine Settings>Home speed"
+#define X_HOMESPEED_EN                  "XY-axis Home speed"
+#define Y_HOMESPEED_EN                  "Y-axis Home speed"
+#define Z_HOMESPEED_EN                  "Z-axis Home speed"
+
+#define ADVANCED_CONF_TITLE_EN          "Machine Settings>Advance"
+#define PWROFF_DECTION_EN               "power off dection module"
+#define PWROFF_AFTER_PRINT_EN           "Auto Shutdown after print"
+#define HAVE_UPS_EN                     "Has UPS power supply"
+#define Z2_AND_Z2ENDSTOP_CONF_EN        "Z2 Settings"
+#define ENABLE_PINS_CONF_EN             "Enable pins level settings"
+
+#define Z2_AND_Z2ENDSTOP_CONF_TITLE_EN  "Z2 Settings"
+#define Z2_ENABLE_EN                    "Z2 Enable"
+#define Z2_ENDSTOP_EN                   "Z2_EndStop Enable"
+#define Z2_PORT_EN                      "Z2 Connector"
+
+#define ENABLE_PINS_CONF_TITLE_EN       "ENABLE_PINS_LEVEL"
+#define X_ENABLE_PINS_INVERT_EN         "X_ENABLE_PIN_INVERT"
+#define Y_ENABLE_PINS_INVERT_EN         "Y_ENABLE_PIN_INVERT"
+#define Z_ENABLE_PINS_INVERT_EN         "Z_ENABLE_PIN_INVERT"
+#define E_ENABLE_PINS_INVERT_EN         "E_ENABLE_PIN_INVERT"
+
+#define TOOL_TEXT_EN            "Tool"
+#define PREHEAT_TEXT_EN         "Preheat"
+#define MOVE_TEXT_EN            "Move"
+#define HOME_TEXT_EN            "Home"
+#define PRINT_TEXT_EN           "Printing"
+#define EXTRUDE_TEXT_EN         "Extrusion"
+#define LEVELING_TEXT_EN        "Leveling"
+#define AUTO_LEVELING_TEXT_EN   "AutoLevel"
+#define SET_TEXT_EN             "Settings"
+#define MORE_TEXT_EN            "More"
+
+#define ADD_TEXT_EN             "Add"
+#define DEC_TEXT_EN             "Dec"
+#define EXTRUDER_1_TEXT_EN      "Extrusion1"
+#define EXTRUDER_2_TEXT_EN      "Extrusion2"
+#define HEATBED_TEXT_EN         "HeatBed"
+#define TEXT_1C_EN              "1℃"
+#define TEXT_5C_EN              "5℃"
+#define TEXT_10C_EN             "10℃"
+#define CLOSE_TEXT_EN           "Close"
+
+#define BACK_TEXT_EN            "Back"
+
+#define TOOL_PREHEAT_EN         "Preheat"
+#define TOOL_EXTRUDE_EN         "Extrusion"
+#define TOOL_MOVE_EN            "Move"
+#define TOOL_HOME_EN            "Home"
+#define TOOL_LEVELING_EN        "Leveling"
+#define TOOL_AUTO_LEVELING_EN   "AutoLevel"
+#define TOOL_FILAMENT_EN        "Filament"
+#define TOOL_MORE_EN            "More"
+
+#define AXIS_X_ADD_TEXT_EN      "X+"
+#define AXIS_X_DEC_TEXT_EN      "X-"
+#define AXIS_Y_ADD_TEXT_EN      "Y+"
+#define AXIS_Y_DEC_TEXT_EN      "Y-"
+#define AXIS_Z_ADD_TEXT_EN      "Z+"
+#define AXIS_Z_DEC_TEXT_EN      "Z-"
+#define TEXT_01MM_EN            "0.1mm"
+#define TEXT_1MM_EN             "1mm"
+#define TEXT_10MM_EN            "10mm"
+
+#define HOME_X_TEXT_EN          "X"
+#define HOME_Y_TEXT_EN          "Y"
+#define HOME_Z_TEXT_EN          "Z"
+#define HOME_ALL_TEXT_EN        "Home"
+#define HOME_STOPMOVE_EN        "Quickstop"
+
+#define PAGE_UP_TEXT_EN         "Page up"
+#define PAGE_DOWN_TEXT_EN       "Page down"
+
+#define EXTRUDER_IN_TEXT_EN           "In"
+#define EXTRUDER_OUT_TEXT_EN          "Out"
+#define EXTRUDE_1MM_TEXT_EN           "1mm"
+#define EXTRUDE_5MM_TEXT_EN           "5mm"
+#define EXTRUDE_10MM_TEXT_EN          "10mm"
+#define EXTRUDE_LOW_SPEED_TEXT_EN     "Low"
+#define EXTRUDE_MEDIUM_SPEED_TEXT_EN  "Normal"
+#define EXTRUDE_HIGH_SPEED_TEXT_EN    "High"
+
+#define LEVELING_POINT1_TEXT_EN       "Point1"
+#define LEVELING_POINT2_TEXT_EN       "Point2"
+#define LEVELING_POINT3_TEXT_EN       "Point3"
+#define LEVELING_POINT4_TEXT_EN       "Point4"
+#define LEVELING_POINT5_TEXT_EN       "Point5"
+
+#define FILESYS_TEXT_EN               "FileSys"
+#define WIFI_TEXT_EN                  "WiFi"
+#define FAN_TEXT_EN                   "Fan"
+#define ABOUT_TEXT_EN                 "About"
+#define BREAK_POINT_TEXT_EN           "Continue"
+#define FILAMENT_TEXT_EN              "Filament"
+#define LANGUAGE_TEXT_EN              "Language"
+#define MOTOR_OFF_TEXT_EN             "Motor-off"
+#define MOTOR_OFF_XY_TEXT_EN          "Off-XY"
+#define SHUTDOWN_TEXT_EN              "Shutdown"
+
+#define U_DISK_TEXT_EN                "USB"
+#define SD_CARD_TEXT_EN               "SD"
+#define WIFI_NAME_TEXT_EN             "WiFi: "
+#define WIFI_KEY_TEXT_EN              "Key: "
+#define WIFI_IP_TEXT_EN               "IP: "
+#define WIFI_AP_TEXT_EN               "State: AP"
+#define WIFI_STA_TEXT_EN              "State: STA"
+#define WIFI_CONNECTED_TEXT_EN        "Connected"
+#define WIFI_DISCONNECTED_TEXT_EN     "Disconnected"
+#define WIFI_EXCEPTION_TEXT_EN        "Exception"
+#define WIFI_RECONNECT_TEXT_EN        "Reconnect"
+#define CLOUD_TEXT_EN                 "Cloud"
+#define CLOUD_BIND_EN                 "Bind"
+#define CLOUD_UNBIND_EN               "Unbind"
+#define CLOUD_UNBINDING_EN            "Unbinding"
+#define CLOUD_DISCONNECTED_EN         "Disconnected"
+#define CLOUD_UNBINDED_EN             "Unbinded"
+#define CLOUD_BINDED_EN               "Binded"
+#define CLOUD_DISABLE_EN              "Disable"
+
+#define FAN_ADD_TEXT_EN               "Add"
+#define FAN_DEC_TEXT_EN               "Dec"
+#define FAN_OPEN_TEXT_EN              "100%"
+#define FAN_HALF_TEXT_EN              "50%"
+#define FAN_CLOSE_TEXT_EN             "Close"
+#define FAN_TIPS1_TEXT_EN             "FAN"
+#define FAN_TIPS2_TEXT_EN             "FAN\nClose"
+
+#define FILAMENT_IN_TEXT_EN           "Load"
+#define FILAMENT_OUT_TEXT_EN          "Unload"
+#define FILAMENT_EXT0_TEXT_EN         "Extrusion1"
+#define FILAMENT_EXT1_TEXT_EN         "Extrusion2"
+#define FILAMENT_HEAT_TEXT_EN         "Preheat"
+#define FILAMENT_STOP_TEXT_EN         "Stop"
+//#define FILAMENT_CHANGE_TEXT_EN       "Filament replace"
+#define FILAMENT_TIPS2_TEXT_EN        "T:"
+#define FILAMENT_TIPS3_TEXT_EN        "Loading..."
+#define FILAMENT_TIPS4_TEXT_EN        "Unloading..."
+#define FILAMENT_TIPS5_TEXT_EN        "Temp is too low to go,please heat"
+#define FILAMENT_TIPS6_TEXT_EN        "Completed"
+
+#if 0
+  #define FILAMENT_REPLAYS_IDLE_TEXT_EN           "Please click <Load> or <unload> \nto replace filament!"
+  #define FILAMENT_CHANGE_TEXT_EN                 "Please click <Load> or <unload>,\nAfter pinter pause."
+  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_EN       "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_EN     "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_EN   "Heat completed,please load filament to extruder,and click <confirm> for start loading."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_EN   "Please load filament to extruder,and click <confirm> for start loading."
+  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_EN  "Heat completed,please click <confirm> for start unloading.!"
+  #define FILAMENT_DIALOG_LOADING_TIPS_EN         "Is loading ,please wait!"
+  #define FILAMENT_DIALOG_UNLOADING_TIPS_EN       "Is unloading,please wait!"
+  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_EN   "Load filament completed,click <confirm> for return!"
+  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_EN "Unload filament completed,click <confirm> for return!"
+#endif
+
+
+#define FILAMENT_CHANGE_TEXT_EN                 "Please click <Load> \nor <unload>,After \npinter pause."
+#define FILAMENT_DIALOG_LOAD_HEAT_TIPS_EN       "Heating up the nozzle,\nplease wait..."
+#define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_EN     "Heating up the nozzle,\nplease wait..."
+#define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_EN   "Heat completed,please load filament \nto extruder,and click <confirm> \nfor start loading."
+#define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_EN   "Please load filament to extruder,\nand click <confirm> for start loading."
+#define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_EN  "Heat completed,please \nclick <confirm> for start unloading.!"
+#define FILAMENT_DIALOG_LOADING_TIPS_EN         "Is loading ,please wait!"
+#define FILAMENT_DIALOG_UNLOADING_TIPS_EN       "Is unloading,please wait!"
+#define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_EN   "Load filament completed,\nclick <confirm> for return!"
+#define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_EN "Unload filament completed,\nclick <confirm> for return!"
+
+
+#define PRE_HEAT_EXT_TEXT_EN                "E"
+#define PRE_HEAT_BED_TEXT_EN                "Bed"
+
+#define FILE_LOADING_EN                 "Loading......"
+#if 0
+  #define NO_FILE_AND_CHECK_EN          "No files found!Please insert SD card or U disk!"
+#else
+  #define NO_FILE_AND_CHECK_EN          "  No files found!\n            Check the file system configuration!"
+#endif
+
+#define NO_FILE_EN                          "No files found!"
+
+#define EXTRUDER_TEMP_TEXT_EN               "Temper"
+#define EXTRUDER_E_LENGTH1_TEXT_EN          "Extrusion1"
+#define EXTRUDER_E_LENGTH2_TEXT_EN          "Extrusion2"
+#define EXTRUDER_E_LENGTH3_TEXT_EN          "Extrusion3"
+
+#define ABOUT_TYPE_TEXT_EN                  "Type: "
+#define ABOUT_VERSION_TEXT_EN               "Firmware: "
+#define ABOUT_WIFI_TEXT_EN                  "WiFi: "
+
+#define PRINTING_OPERATION_EN               "Option"
+#define PRINTING_PAUSE_EN                   "Pause"
+#define PRINTING_TEMP_EN                    "Temp."
+#define PRINTING_CHANGESPEED_EN             "Speed"
+#define PRINTING_RESUME_EN                  "Resume"
+#define PRINTING_STOP_EN                    "Stop"
+#define PRINTING_MORE_EN                    "More"
+#define PRINTING_EXTRUDER_EN                "Extrusion"
+#define PRINTING_MOVE_EN                    "Move"
+
+#define EXTRUDER_SPEED_EN                   "Extrusion"
+#define MOVE_SPEED_EN                       "Move"
+#define EXTRUDER_SPEED_STATE_EN             "Extrude Speed"
+#define MOVE_SPEED_STATE_EN                 "Move Speed"
+#define STEP_1PERCENT_EN                    "1%"
+#define STEP_5PERCENT_EN                    "5%"
+#define STEP_10PERCENT_EN                   "10%"
+
+#define ZOFFSET_EN                          "Z Offset"
+#define ZOFFSET_INC_EN                      "Add"
+#define ZOFFSET_DEC_EN                      "Dec"
+
+#define TITLE_READYPRINT_EN                 "ReadyPrint"
+#define TITLE_PREHEAT_EN                    "Preheat"
+#define TITLE_MOVE_EN                       "Move"
+#define TITLE_HOME_EN                       "Home"
+#define TITLE_EXTRUDE_EN                    "Extrusion"
+#define TITLE_LEVELING_EN                   "Leveling"
+#define TITLE_SET_EN                        "Settings"
+#define TITLE_MORE_EN                       "More"
+#define TITLE_CHOOSEFILE_EN                 "ChooseFile"
+#define TITLE_PRINTING_EN                   "Printing"
+#define TITLE_OPERATION_EN                  "Operation"
+#define TITLE_ADJUST_EN                     "Adjust"
+#define TITLE_WIRELESS_EN                   "Wireless"
+#define TITLE_FILAMENT_EN                   "Filament"
+#define TITLE_ABOUT_EN                      "About"
+#define TITLE_FAN_EN                        "Fan"
+#define TITLE_LANGUAGE_EN                   "Language"
+#define TITLE_PAUSE_EN                      "Pause"
+#define TITLE_CHANGESPEED_EN                "Speed"
+#define TITLE_CLOUD_TEXT_EN                 "Cloud"
+#define TITLE_DIALOG_CONFIRM_EN             "Confirm"
+#define TITLE_FILESYS_EN                    "FileSys"
+#define TITLE_ZOFFSET_EN                    "Z Offset"
+
+#define AUTO_SHUTDOWN_EN                    "Auto"
+#define MANUAL_SHUTDOWN_EN                  "Manual"
+
+#define DIALOG_CONFIRM_EN                   "Confirm"
+#define DIALOG_CANCLE_EN                    "Cancel"
+#define DIALOG_OK_EN                        "OK"
+#define DIALOG_RESET_EN                     "Reset"
+#define DIALOG_RETRY_EN                     "Retry"
+#define DIALOG_DISABLE_EN                   "Disable"
+#define DIALOG_PRINT_MODEL_EN               "Print this model?"
+#define DIALOG_CANCEL_PRINT_EN              "Stop print?"
+#define DIALOG_RETRY_EN                     "Retry"
+#define DIALOG_STOP_EN                      "Stop"
+#define DIALOG_REPRINT_FROM_BREAKPOINT_EN   "Reprint from breakpoint?"
+//#define DIALOG_UNBIND_PRINTER_EN          "Unbind the printer?"
+#define DIALOG_ERROR_TIPS1_EN               "Error:no file,please check it again."
+#define DIALOG_ERROR_TIPS2_EN               "Error:transaction failed.please check display baudrate \nwhether as the same as mainboard!"
+#define DIALOG_ERROR_TIPS3_EN               "Error:file name or path is too long!"
+#define DIALOG_CLOSE_MACHINE_EN             "Closing machine......"
+#define DIALOG_UNBIND_PRINTER_EN            "Unbind the printer?"
+#define DIALOG_FILAMENT_NO_PRESS_EN         "Filament detection switch is not pressed"
+#define DIALOG_PRINT_FINISH_EN              "Done print!"
+#define DIALOG_PRINT_TIME_EN                "Print time: "
+#define DIALOG_REPRINT_EN                   "Print again"
+#define DIALOG_WIFI_ENABLE_TIPS_EN "The wifi module is being configured\nplease wait a moment....."
+
+#define HOTBED_ENABLE_EN        "Enable heatbed"
+#define MOTOR_EN_HIGH_LEVEL_EN  "High"
+#define MOTOR_EN_LOW_LEVEL_EN   "Low"
+
+#define TEXT_WIFI_MENU_TITLE_EN "WI-FI"
+#define TEXT_WIFI_SAPCE_EN      "space"
+#define TEXT_WIFI_LETTER_EN     "abc"
+#define TEXT_WIFI_DIGITAL_EN    "123"
+#define TEXT_WIFI_SYMBOL_EN     "#+="
+#define TEXT_WIFI_PASSWORD_EN   "Password"
+
+#define TEXT_WIFI_POINT_BOLD_EN "`"
+
+#define TEXT_WIFI_JOINING_EN        "Joining\nNetwork..."
+#define TEXT_WIFI_FAILED_JOIN_EN    "Failed to\nJoin Wi-Fi"
+#define TEXT_WIFI_WIFI_CONECTED_EN  "Wi-Fi\nConnected"
+
+#define TEXT_BUTTON_DISCONECTED_EN  "Disconnect"
+#define TEXT_WIFI_FORGET_EN         "Forget Network"
+#define TEXT_DISCONECTED_EN         "Wi-Fi Connected"
+
+//wifi-list
+#define MAIN_BUILT_EN       "Build"
+#define MAIN_FILAMENT_EN    "Filament"
+#define MAIN_SETUP_EN       "Setup"
+#define MAIN_ABOUT_EN       "About"
+#define MAIN_MENU_EN        "Menu"
+#define FILE_MENU_BUILD_EN  "Build"
+#define FILE_MENU_MENU_EN   " < Menu"
+
+//about
+#define ABOUT_TITLE_EN                    "About"
+#define ABOUT_BUILT_MACHINES_EN           "Built Machines"
+#define ABOUT_SPARK_EN                    "Spark"
+#define ABOUT_VERSION_EN                  "Version 1.1.0"
+#define ABOUT_SERIAL_NUMBER_EN            "Serial Number:"
+#define ABOUT_S_NUMBER_EN                 "DCPLX02KFC6P"
+
+//set
+#define SETUP_TITLE_EN                    "Setup"
+#define SETUP_WIFI_EN                     "Wi-Fi"
+#define SETUP_MANUAL_IP_EN                "Manual IP"
+#define SETUP_WIFI_NOT_CONNECTED_EN       "Not Connected"
+#define SETUP_WIFI_NETWORK_EN             "WiFi_Network"
+
+//build
+#define BUILD_TITLE_EN                    "Build"
+#define BUILD_SD_CARD_EN                  "SD Card"
+#define BUILD_USB_DRIVE_EN                "USB Drive"
+
+//SD card
+#define SD_CARD_TITLE_EN                  "SD Card"
+#define SD_CARD_BACK_EN                   "< Back"
+//USB Drive
+#define USB_DRIVE_TITLE_EN                "USB Drive"
+#define USB_DRIVE_BACK_EN                 "< Back"
+#define FILE_PAGES_EN                     "%d/%d"
+#define FILE_NEXT_PAGE_EN                 "Next Page"
+
+//BUILD PLATE
+#define PLATE_TITLE_EN                    "Build Plate"
+#define PLATE_BACK_EN                     "< Back"
+#define PLATE_CONFIRM_EN                  "Confirm >"
+#define PLATE_TIPS_EN                     "Confirm that there is a Clear\nBuild Plate installed in the\nmachine."
+
+//build model
+#define MODEL_TITLE_EN                    "Build Model"
+#define MODEL_START_BUILD_EN              "Start Build"
+#define MODEL_BACK_EN                     "< Back"
+
+//building
+#define BUILDING_TITLE_EN                 "Building"
+#define BUILDING_MENU_EN                  "Build Menu"
+#define BUILDING_COMPLETED                "Build\nComplete"
+
+//building menu
+#define BUILDING_MENU_TITLE_EN            "Build Menu"
+#define BUILDING_MENU_SETTINGS_EN         "Build Settings"
+#define BUILDING_MENU_PAUSE_EN            "Pause Build"
+#define BUILDING_MENU_CANCEL_EN           "Cancel Build"
+#define BUILDING_MENU_BACK_EN             "< Back"
+
+//build settings
+#define SETTINGS_TITLE_EN                 "Build Settings"
+#define SETTINGS_NOZZLE_TEMPER_EN         "Nozzle Temp:"
+#define SETTINGS_NOZZLE_VALUE_EN          "%d"
+#define SETTINGS_BED_TEMPER_EN            "Bed Temp:"
+#define SETTINGS_BED_VALUE_EN             "%d"
+#define SETTINGS_BUILD_SPEED_EN           "Build Speed:"
+#define SETTINGS_SPEED_VALUE_EN           "Standard"
+#define SETTINGS_BACK_EN                  "< Back"
+
+//build paused
+#define PAUSED_TITLE_EN                   "Build Paused"
+#define PAUSED_RESUME_EN                  "Resume Build"
+#define PAUSED_CANCEL_EN                  "Cancel Build"
+#define PAUSED_BACK_EN                    "< Back"
+
+//build cancel
+#define CANCEL_TITLE_EN                   "Cancel Build"
+#define CANCEL_BUILD_EN                   "Cancel Build"
+#define CANCEL_TIPS_EN                    "Are you sure you want to\ncancel this build? The model\nwill be deleted from this\nmachine. It will need to be\nresent from your computer\nbefore it can be built in the\nfuture."
+#define CANCEL_BACK_EN                    "< Back"
+#define CANCEL_BUILD_DISPLAY_EN           "Build\nCanceled"
+#define CANCEL_OVER_PLATE_TIPS_EN         "Confirm that the Build Plate\nhas been removed from the\nmachine."
+
+//filament model enter
+#define FILAMENT_MODEL_ENTER_TITLE_EN     "Model-PLA"
+#define FILAMENT_MODEL_ENTER_BACK_EN      "< Back"
+#define FILAMENT_MODEL_ENTER_BEGIN_EN     "Begin >"
+#define FILAMENT_MODEL_ENTER_TIPS_EN      "The Model Filament spool\ncompartment is located on\nthe right side of the machine."
+
+//filament model PLA
+#define FILAMENT_MODEL_PLA_TITLE_EN       "Model-PLA"
+#define FILAMENT_PLA_LOAD_TITLE_EN        "Load Filament"
+#define FILAMENT_PLA_UNLOAD_TITLE_EN      "Unload Filament"
+#define FILAMENT_MODEL_PLA_LOAD_EN        "Load Filament"
+#define FILAMENT_MODEL_PLA_UNLOAD_EN      "Unload Filament"
+//filament support enter
+#define FILAMENT_SUPPORT_ENTER_TITLE_EN   "Support-PVA"
+#define FILAMENT_SUPPORT_ENTER_BACK_EN    "< Back"
+#define FILAMENT_SUPPORT_ENTER_BEGIN_EN   "Begin >"
+#define FILAMENT_SUPPORT_ENTER_TIPS_EN    "The Support Filament spool\ncompartment is located on\nthe left side of the machine."
+//filament heating
+#define FILAMENT_HEATING_LOAD_TITLE_EN    "Load Filament"
+#define FILAMENT_HEATING_UNLOAD_TITLE_EN  "Unload Filament"
+#define FILAMENT_HEATING_CANCEL_EN        "< Cancel"
+#define FILAMENT_HEATING_MATERIAL_EN      "Material:"
+#define FILAMENT_HEATING_PLA_EN           "Model-PLA"
+#define FILAMENT_HEATING_TIPS_EN          "Print head is heating..."
+//rotate left
+#define ROTATE_LEFT_LOAD_TITLE_EN         "Load Filament"
+#define ROTATE_LEFT_UNLOAD_TITLE_EN       "Unload Filament"
+#define ROTATE_LEFT_CANCEL_EN             "< Cancel"
+#define ROTATE_LEFT_MATERIAL_EN           "Material:"
+#define ROTATE_LEFT_PLA_EN                "Model-PLA"
+#define ROTATE_LEFT_NEXT_EN               "Next >"
+#define ROTATE_LEFT_TIPS_EN               "Rotate extruder selection\ndial to the left."
+
+//hang spool
+#define HANG_SPOOL_TITLE_EN         "Load Filament"
+#define HANG_SPOOL_PREVIOUS_EN      "< Previous"
+#define HANG_SPOOL_MATERIAL_EN      "Material:"
+#define HANG_SPOOL_PLA_EN           "Model-PLA"
+#define HANG_SPOOL_NEXT_EN          "Next >"
+#define HANG_SPOOL_TIPS_EN          "Hang the spool in the spool\ncompartment as shown."
+
+//feed filament
+#define FEED_FILAMENT_TITLE_EN      "Load Filament"
+#define FEED_FILAMENT_PREVIOUS_EN   "< Previous"
+#define FEED_FILAMENT_MATERIAL_EN   "Material:"
+#define FEED_FILAMENT_PLA_EN        "Model-PLA"
+#define FEED_FILAMENT_NEXT_EN       "Next >"
+#define FEED_FILAMENT_TIPS_EN       "Feed filament into extruder\nup beyond the gears."
+
+//feed filament
+#define ROTATE_UP_TITLE_EN          "Load Filament"
+#define ROTATE_UP_PREVIOUS_EN        "< Previous"
+#define ROTATE_UP_MATERIAL_EN       "Material:"
+#define ROTATE_UP_PLA_EN            "Model-PLA"
+#define ROTATE_UP_NEXT_EN           "Next >"
+#define ROTATE_UP_TIPS_EN           "Rotate extruder selection\ndial up."
+
+//filament begin
+#define FEED_BEGIN_TITLE_EN         "Load Filament"
+#define FEED_BEGIN_MATERIAL_EN      "Material:"
+#define FEED_BEGIN_PLA_EN           "Model-PLA"
+#define FEED_BEGIN_NEXT_EN          "Next >"
+#define FEED_BEGIN_TIPS_EN          "Press Next when filament\nbegins to extrude."
+
+//filament finish
+#define FEED_FINISH_TITLE_EN        "Load Filament"
+#define FEED_FINISH_MATERIAL_EN     "Material:"
+#define FEED_FINISH_PLA_EN          "Model-PLA"
+#define FEED_FINISH_NEXT_EN         "Finish >"
+#define FEED_FINISH_TIPS_EN         "Remove filament from the\nnozzle and discard."
+//fiament remove
+#define REMOVE_SPOOL_TITLE_EN       "Unload Filament"
+#define REMOVE_SPOOL_PREVIOUS_EN     "< Previous"
+#define REMOVE_SPOOL_FINISH_EN      "Finish >"
+#define REMOVE_SPOOL_MATERIAL_EN    "Material:"
+#define REMOVE_SPOOL_PLA_EN         "Model-PLA"
+#define REMOVE_SPOOL_TIPS_EN        "Remove the spool and pull\nfilament out of the machine."
+
+#define FILAMENT_SUPPORT_PVA_EN     "Support-PVA"
+#define LOAD_FINISH_EN              "Load\nFilament\nComplete"
+#define UNLOAD_FINISH_EN            "Unload\nFilament\nComplete"
+
+//manual ip
+#define MANUAL_IP_TITLE_EN          "Manual IP"
+#define MANUAL_IP_CANCEL_EN          "< Cancel"
+#define MANUAL_IP_APPLY_EN          "Join >"
+#define MANUAL_IP_ADDRESS_EN        "IP Address"
+#define MANUAL_IP_MASK_EN           "Subnet Mask"
+#define MANUAL_IP_GATEWAY_EN        "Default Gateway"
+#define MANUAL_IP_SERVER_EN         "Name Server"
+#define MANUAL_IP_INIT_DATA_EN      "0.0.0.0"
+#define MANUAL_TEXT_POINT_EN         "."
+#define MANUAL_TEXT_ENTER_EN        "enter"
+
+//Wifi name
+//#define TEXT_WIFI_MENU_TITLE_EN "WI-FI"
+//#define TEXT_WIFI_SAPCE_EN  "space"
+//#define TEXT_WIFI_LETTER_EN  "abc"
+//#define TEXT_WIFI_DIGITAL_EN  "123"
+//#define TEXT_WIFI_SYMBOL_EN  "#+="
+//#define TEXT_WIFI_PASSWORD_EN "Password"
+
+//#define TEXT_WIFI_POINT_BOLD_EN "`"
+
+//#define TEXT_WIFI_JOINING_EN  "Joining\nNetwork..."
+//#define TEXT_WIFI_FAILED_JOIN_EN  "Failed to\nJoin Wi-Fi"
+//#define TEXT_WIFI_WIFI_CONECTED_EN "Wi-Fi\nConnected"
+
+//#define TEXT_BUTTON_DISCONECTED_EN "Disconnect"
+//#define TEXT_WIFI_FORGET_EN "Forget Network"
+//#define TEXT_DISCONECTED_EN "Wi-Fi Connected"
+
+#define TEXT_FORGET_TIPS_TITLE_EN "Forget Network"
+#define TEXT_FORGET_NETWORK_TIPS1_EN "Are you sure you want to\nforget this network?"
+#define TEXT_FORGET_NETWORK_TIPS2_EN "This machine will no longer\njoin this Wi-Fi Network."
+
+#define TEXT_IPADDRESS_EN "IP Address: "
+
+#define TEXT_BUILD_FROM_CURA_CANCEL_TIPS1_EN "Are you sure you want to\ncancel this build?"
+#define TEXT_BUILD_FROM_CURA_CANCEL_TIPS2_EN "The model will be deleted\nfrom this machine.It will\nneed to be resent from your\ncomputer before it can be\nbuilt in the future."
+
+#define DIALOG_CONFIRM_EN2              "Confirm"
+
+#define HEATING_TITLE_EN  "Heating"
+#define LEVELING_TITLE_EN  "Leveling"
+
+#define ABOUT_SPARK_ADD_EN "Spark+"
+
+#define TEXT_RECEIVING_DATA_EN "Receiving Data"
+
+#define TEXT_BABY_STEP_EN "Babystep"
+
+#define PRINTING_OTHER_LANGUGE              "Printing"
+#define PRINTING_OPERATION_OTHER_LANGUGE    "Operation"
+#define PRINTING_PAUSE_OTHER_LANGUGE        "Pause"
+
+#define MESSEGE_PAUSING_EN          "Parking..."
+#define MESSEGE_CHANGING_EN         "Wait for filament change to start"
+#define MESSEGE_UNLOAD_EN           "Wait for filament unload"
+#define MESSEGE_WAITING_EN          "Press Button to resume print"
+#define MESSEGE_INSERT_EN           "Insert filament and press button to continue"
+#define MESSEGE_LOAD_EN             "Wait for filament load"
+#define MESSEGE_PURGE_EN            "Wait for filament purge"
+#define MESSEGE_RESUME_EN           "Wait for print to resume..."
+#define MESSEGE_HEAT_EN             "Press button to heat nozzle"
+#define MESSEGE_HEATING_EN          "Nozzle heating Please wait..."
+#define MESSEGE_OPTION_EN           "Purge more or continue print?"
+#define MESSEGE_PURGE_MORE_EN       "Purge"
+#define MESSEGE_CONTINUE_PRINT_EN   "Print"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_fr.h

@@ -0,0 +1,276 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//*************法文****************************//
+#define TOOL_TEXT_FR                  "prêt"
+#define PREHEAT_TEXT_FR               "Préchauffe"
+#define MOVE_TEXT_FR                  "Déplace"
+#define HOME_TEXT_FR                  "Acceuil"
+#define PRINT_TEXT_FR                 "Impression"
+#define EXTRUDE_TEXT_FR               "Extruder"
+#define LEVELING_TEXT_FR              "Leveling"
+#define AUTO_LEVELING_TEXT_FR         "AutoLevel"
+#define SET_TEXT_FR                   "Config"
+#define MORE_TEXT_FR                  "Plus"
+
+#define ADD_TEXT_FR                   "Ajouter"
+#define DEC_TEXT_FR                   "Réduire"
+#define EXTRUDER_1_TEXT_FR            "Extr1"
+#define EXTRUDER_2_TEXT_FR            "Extr2"
+#define HEATBED_TEXT_FR               "Hotlit"
+#define TEXT_1C_FR                    "1℃"
+#define TEXT_5C_FR                    "5℃"
+#define TEXT_10C_FR                   "10℃"
+#define CLOSE_TEXT_FR                 "Off"
+
+#define BACK_TEXT_FR                  "Arrière"
+
+#define TOOL_PREHEAT_FR               "Préchauffe"
+#define TOOL_EXTRUDE_FR               "Extruder"
+#define TOOL_MOVE_FR                  "Déplace"
+#define TOOL_HOME_FR                  "Acceuil"
+#define TOOL_LEVELING_FR              "Leveling"
+#define TOOL_AUTO_LEVELING_FR         "AutoLevel"
+#define TOOL_FILAMENT_FR              "Filament"
+#define TOOL_MORE_FR                  "Plus"
+
+#define AXIS_X_ADD_TEXT_FR            "X+"
+#define AXIS_X_DEC_TEXT_FR            "X-"
+#define AXIS_Y_ADD_TEXT_FR            "Y+"
+#define AXIS_Y_DEC_TEXT_FR            "Y-"
+#define AXIS_Z_ADD_TEXT_FR            "Z+"
+#define AXIS_Z_DEC_TEXT_FR            "Z-"
+#define TEXT_01MM_FR                  "0.1mm"
+#define TEXT_1MM_FR                   "1mm"
+#define TEXT_10MM_FR                  "10mm"
+
+#define HOME_X_TEXT_FR                "X"
+#define HOME_Y_TEXT_FR                "Y"
+#define HOME_Z_TEXT_FR                "Z"
+#define HOME_ALL_TEXT_FR              "ALL"
+#define HOME_STOPMOVE_FR              "Quickstop"
+
+#define PAGE_UP_TEXT_FR               "En haut"
+#define PAGE_DOWN_TEXT_FR             "En bas"
+
+#define EXTRUDER_IN_TEXT_FR           "Insérer"
+#define EXTRUDER_OUT_TEXT_FR          "éjecter"
+#define EXTRUDE_1MM_TEXT_FR           "1mm"
+#define EXTRUDE_5MM_TEXT_FR           "5mm"
+#define EXTRUDE_10MM_TEXT_FR          "10mm"
+#define EXTRUDE_LOW_SPEED_TEXT_FR     "Lente"
+#define EXTRUDE_MEDIUM_SPEED_TEXT_FR  "Moyen"
+#define EXTRUDE_HIGH_SPEED_TEXT_FR    "Rapide"
+
+#define LEVELING_POINT1_TEXT_FR       "Premier"
+#define LEVELING_POINT2_TEXT_FR       "Seconde"
+#define LEVELING_POINT3_TEXT_FR       "Troisième"
+#define LEVELING_POINT4_TEXT_FR       "Quatrième"
+#define LEVELING_POINT5_TEXT_FR       "Cinquième"
+
+#define FILESYS_TEXT_FR               "Fichier"
+#define WIFI_TEXT_FR                  "WiFi"
+#define FAN_TEXT_FR                   "Fan"
+#define ABOUT_TEXT_FR                 "A propos"
+#define BREAK_POINT_TEXT_FR           "Continuer"
+#define FILAMENT_TEXT_FR              "Remplacer"
+#define LANGUAGE_TEXT_FR              "Langue"
+#define MOTOR_OFF_TEXT_FR             "M-hors"
+#define MOTOR_OFF_XY_TEXT_FR          "M-hors-XY"
+#define SHUTDOWN_TEXT_FR              "Eteindre"
+
+#define U_DISK_TEXT_FR                "Clé usb"
+#define SD_CARD_TEXT_FR               "Carte SD"
+#define WIFI_NAME_TEXT_FR             "WiFi: "
+#define WIFI_KEY_TEXT_FR              "Key: "
+#define WIFI_IP_TEXT_FR               "IP: "
+#define WIFI_AP_TEXT_FR               "Etat: AP"
+#define WIFI_STA_TEXT_FR              "Etat: STA"
+#define WIFI_CONNECTED_TEXT_FR        "Connecté"
+#define WIFI_DISCONNECTED_TEXT_FR     "Déconnecté"
+#define WIFI_EXCEPTION_TEXT_FR        "Exception"
+#define WIFI_RECONNECT_TEXT_FR        "Reconnect"
+#define CLOUD_TEXT_FR                 "Cloud"
+#define CLOUD_BIND_FR                 "Lié"
+#define CLOUD_UNBIND_FR               "Délier"
+#define CLOUD_UNBINDING_FR            "Délier"
+#define CLOUD_DISCONNECTED_FR         "Déconnecté"
+#define CLOUD_UNBINDED_FR             "Délier"
+#define CLOUD_BINDED_FR               "Lié"
+#define CLOUD_DISABLE_FR              "Désactiver"
+
+#define FAN_ADD_TEXT_FR               "Ajouter"
+#define FAN_DEC_TEXT_FR               "Réduire"
+#define FAN_OPEN_TEXT_FR              "100%"
+#define FAN_HALF_TEXT_FR              "50%"
+#define FAN_CLOSE_TEXT_FR             "0%"
+#define FAN_TIPS1_TEXT_FR             "ventilateur"
+#define FAN_TIPS2_TEXT_FR             "ventilateur\n0"
+
+#define FILAMENT_IN_TEXT_FR           "Insérer"
+#define FILAMENT_OUT_TEXT_FR          "éjecter"
+#define FILAMENT_EXT0_TEXT_FR         "Extr1"
+#define FILAMENT_EXT1_TEXT_FR         "Extr2"
+#define FILAMENT_HEAT_TEXT_FR         "Preheat"
+#define FILAMENT_STOP_TEXT_FR         "Arrêter"
+//#define FILAMENT_CHANGE_TEXT_FR     "Filament remplacer"
+#define FILAMENT_TIPS2_TEXT_FR        "T:"
+#define FILAMENT_TIPS3_TEXT_FR        "Insérer le filament..."
+#define FILAMENT_TIPS4_TEXT_FR        "éjecter le filament..."
+#define FILAMENT_TIPS5_TEXT_FR        "Température trop basse pour démarrer, chauffez svp"
+#define FILAMENT_TIPS6_TEXT_FR        "Terminé"
+
+#if 0
+  #define FILAMENT_REPLAYS_IDLE_TEXT_FR             "Please click <Insérer> or <éjecter> \nto replace filament!"
+  #define FILAMENT_CHANGE_TEXT_FR                   "Please click <Insérer> or <éjecter>,\nAfter pinter pause."
+  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_FR         "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_FR       "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_FR     "Heat completed,please load filament to extruder,and click <Confirmer> for start loading."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_FR     "Please load filament to extruder,and click <Confirmer> for start loading."
+  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_FR    "Heat completed,please click <Confirmer> for start unloading.!"
+  #define FILAMENT_DIALOG_LOADING_TIPS_FR           "Is loading ,please wait!"
+  #define FILAMENT_DIALOG_UNLOADING_TIPS_FR         "Is unloading,please wait!"
+  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_FR     "Load filament completed,click <Confirmer> for return!"
+  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_FR   "Unload filament completed,click <Confirmer> for return!"
+#endif
+#define FILAMENT_CHANGE_TEXT_FR                   "Please click <Load> \nor <unload>,After \npinter pause."
+#define FILAMENT_DIALOG_LOAD_HEAT_TIPS_FR         "Heating up the nozzle,\nplease wait..."
+#define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_FR       "Heating up the nozzle,\nplease wait..."
+#define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_FR     "Heat completed,please load filament \nto extruder,and click <confirm> \nfor start loading."
+#define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_FR     "Please load filament to extruder,\nand click <confirm> for start loading."
+#define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_FR    "Heat completed,please \nclick <confirm> for start unloading.!"
+#define FILAMENT_DIALOG_LOADING_TIPS_FR           "Is loading ,please wait!"
+#define FILAMENT_DIALOG_UNLOADING_TIPS_FR         "Is unloading,please wait!"
+#define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_FR     "Load filament completed,\nclick <confirm> for return!"
+#define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_FR   "Unload filament completed,\nclick <confirm> for return!"
+
+
+#define PRE_HEAT_EXT_TEXT_FR          "E"
+#define PRE_HEAT_BED_TEXT_FR          "Bed"
+
+#define FILE_LOADING_FR               "Chargement......"
+#if 0
+  #define NO_FILE_AND_CHECK_FR        "Aucun fichier trouvé! Insérez une carte SD ou un disque U!"
+#else
+  #define NO_FILE_AND_CHECK_FR        "Aucun fichier,vérifiez à nouveau!"
+#endif
+
+#define NO_FILE_FR                    "Pas de fichier!"
+
+
+
+#define EXTRUDER_TEMP_TEXT_FR         "Temper"
+#define EXTRUDER_E_LENGTH1_TEXT_FR    "Extruder1"
+#define EXTRUDER_E_LENGTH2_TEXT_FR    "Extruder2"
+#define EXTRUDER_E_LENGTH3_TEXT_FR    "Extruder3"
+
+#define ABOUT_TYPE_TEXT_FR            "Type: "
+#define ABOUT_VERSION_TEXT_FR         "Firmware: "
+#define ABOUT_WIFI_TEXT_FR            "Wifi: "
+
+#define PRINTING_OPERATION_FR         "Option"
+#define PRINTING_PAUSE_FR             "Pause"
+#define PRINTING_TEMP_FR              "Temp."
+#define PRINTING_CHANGESPEED_FR       "Speed"
+#define PRINTING_RESUME_FR            "Reprendre"
+#define PRINTING_STOP_FR              "Stop"
+#define PRINTING_MORE_FR              "Plus"
+#define PRINTING_EXTRUDER_FR          "Extruder"
+#define PRINTING_MOVE_FR              "Déplace"
+
+#define EXTRUDER_SPEED_FR             "Extruder"
+#define MOVE_SPEED_FR                 "Déplace"
+#define EXTRUDER_SPEED_STATE_FR       "Vitesse d'extrusion"
+#define MOVE_SPEED_STATE_FR           "vitesse de déplacement"
+#define STEP_1PERCENT_FR              "1%"
+#define STEP_5PERCENT_FR              "5%"
+#define STEP_10PERCENT_FR             "10%"
+
+#define ZOFFSET_FR                    "Z Offset"
+#define ZOFFSET_INC_FR                "Ajouter"
+#define ZOFFSET_DEC_FR                "Réduire"
+
+#define TITLE_READYPRINT_FR           "Prête"
+#define TITLE_PREHEAT_FR              "Préchauffe"
+#define TITLE_MOVE_FR                 "Déplace"
+#define TITLE_HOME_FR                 "Acceuil"
+#define TITLE_EXTRUDE_FR              "Extruder"
+#define TITLE_LEVELING_FR             "Leveling"
+#define TITLE_SET_FR                  "Paramètres"
+#define TITLE_MORE_FR                 "Plus"
+#define TITLE_CHOOSEFILE_FR           "Fichier"
+#define TITLE_PRINTING_FR             "Pimpression"
+#define TITLE_OPERATION_FR            "Option"
+#define TITLE_ADJUST_FR               "Réglage"
+#define TITLE_WIRELESS_FR             "Sans fil"
+#define TITLE_FILAMENT_FR             "Remplacer"
+#define TITLE_ABOUT_FR                "A propos"
+#define TITLE_FAN_FR                  "Ventilateur"
+#define TITLE_LANGUAGE_FR             "Langue"
+#define TITLE_PAUSE_FR                "Pause"
+#define TITLE_CHANGESPEED_FR          "Speed"
+#define TITLE_CLOUD_TEXT_FR           "Cloud"
+#define TITLE_DIALOG_CONFIRM_FR       "Confirm"
+#define TITLE_FILESYS_FR              "FileSys"
+#define TITLE_ZOFFSET_FR              "Z Offset"
+
+#define DIALOG_CLOSE_MACHINE_FR       "Closing machine......"
+
+#define AUTO_SHUTDOWN_FR              "Auto"
+#define MANUAL_SHUTDOWN_FR            "Manuel"
+
+#define DIALOG_CONFIRM_FR             "Confirmer"
+#define DIALOG_CANCLE_FR              "Annuler"
+#define DIALOG_OK_FR                  "OK"
+#define DIALOG_RESET_FR               "Réinitialiser"
+#define DIALOG_RETRY_FR               "Recommencez"
+#define DIALOG_DISABLE_FR             "Disable"
+#define DIALOG_PRINT_MODEL_FR         "Imprimer le fichier?"
+#define DIALOG_CANCEL_PRINT_FR        "Arrêter?"
+
+#define DIALOG_STOP_FR                "Arrêter"
+#define DIALOG_REPRINT_FROM_BREAKPOINT_FR   "Continuer?"
+//#define DIALOG_UNBIND_PRINTER_FR          "Non lié?"
+#define DIALOG_ERROR_TIPS1_FR               "Erreur:error:Aucun fichier, \nvérifiez à nouveau."
+#define DIALOG_ERROR_TIPS2_FR               "Erreur:La opération a échoué. \nVerifiez que le baudrate de l'écran et de \nla carte mère soient identique!"
+#define DIALOG_ERROR_TIPS3_FR               "Erreur: le nom du fichier ou le \nchemin d'accès est trop long."
+#define DIALOG_UNBIND_PRINTER_FR            "Unbind the printer?"
+#define DIALOG_FILAMENT_NO_PRESS_FR         "Filament detection switch is not pressed"
+#define DIALOG_PRINT_FINISH_FR              "L'impression est terminée!"
+#define DIALOG_PRINT_TIME_FR                "Temps d'impression: "
+#define DIALOG_REPRINT_FR                   "Print again"
+#define DIALOG_WIFI_ENABLE_TIPS_FR          "The wifi module is being configured,\nplease wait a moment....."
+
+#define MESSEGE_PAUSING_FR          "Parking..."
+#define MESSEGE_CHANGING_FR         "Attente filament pour démarrer"
+#define MESSEGE_UNLOAD_FR           "Attente retrait du filament"
+#define MESSEGE_WAITING_FR          "Presser bouton,pour reprendre"
+#define MESSEGE_INSERT_FR           "Insérer filament et app. bouton pour continuer..."
+#define MESSEGE_LOAD_FR             "Attente chargement filament"
+#define MESSEGE_PURGE_FR            "Attente Purge filament"
+#define MESSEGE_RESUME_FR           "Attente reprise impression"
+#define MESSEGE_HEAT_FR             "Presser le bouton pour chauffer..."
+#define MESSEGE_HEATING_FR          "Buse en chauffe Patienter SVP..."
+#define MESSEGE_OPTION_FR           "Purger davantage ou continuer l'impression?"
+#define MESSEGE_PURGE_MORE_FR       "Purge"
+#define MESSEGE_CONTINUE_PRINT_FR   "Impression"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_it.h

@@ -0,0 +1,271 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//****************意大利语***************************//
+#define TOOL_TEXT_IT            "Strumento"
+#define PREHEAT_TEXT_IT         "Prerisc"
+#define MOVE_TEXT_IT                "Muovi"
+#define HOME_TEXT_IT            "Home"
+#define PRINT_TEXT_IT               "Stampa"
+#define EXTRUDE_TEXT_IT         "Estrude"
+#define LEVELING_TEXT_IT        "Leveling"
+#define AUTO_LEVELING_TEXT_IT   "AutoLevel"
+#define SET_TEXT_IT                     "Imposta"
+#define MORE_TEXT_IT            "Di più"
+
+#define ADD_TEXT_IT                         "Aumentare"
+#define DEC_TEXT_IT                         "Ridurre"
+#define EXTRUDER_1_TEXT_IT              "Estrude1"
+#define EXTRUDER_2_TEXT_IT              "Estrude2"
+#define HEATBED_TEXT_IT                 "Piano"
+#define TEXT_1C_IT                              "1℃"
+#define TEXT_5C_IT                              "5℃"
+#define TEXT_10C_IT                             "10℃"
+#define CLOSE_TEXT_IT                   "Spento"
+
+#define BACK_TEXT_IT                                    "Indietro"
+
+#define TOOL_PREHEAT_IT            "Prerisc"
+#define TOOL_EXTRUDE_IT             "Estrude"
+#define TOOL_MOVE_IT                "Muovi"
+#define TOOL_HOME_IT                "Home"
+#define TOOL_LEVELING_IT               "Leveling"
+#define TOOL_AUTO_LEVELING_IT         "Autolevel"
+#define TOOL_FILAMENT_IT                "Filamento"
+#define TOOL_MORE_IT                    "Di più"
+
+#define AXIS_X_ADD_TEXT_IT                              "X+"
+#define AXIS_X_DEC_TEXT_IT                              "X-"
+#define AXIS_Y_ADD_TEXT_IT                              "Y+"
+#define AXIS_Y_DEC_TEXT_IT                              "Y-"
+#define AXIS_Z_ADD_TEXT_IT                              "Z+"
+#define AXIS_Z_DEC_TEXT_IT                              "Z-"
+#define TEXT_01MM_IT                                    "0.1mm"
+#define TEXT_1MM_IT                                             "1mm"
+#define TEXT_10MM_IT                                    "10mm"
+
+#define HOME_X_TEXT_IT                                  "X"
+#define HOME_Y_TEXT_IT                                  "Y"
+#define HOME_Z_TEXT_IT                                  "Z"
+#define HOME_ALL_TEXT_IT                                "All"
+#define HOME_STOPMOVE_IT                "Quickstop"
+
+#define PAGE_UP_TEXT_IT                                 "Pagina su"
+#define PAGE_DOWN_TEXT_IT                               "Pagina giù"
+
+#define EXTRUDER_IN_TEXT_IT                 "Estru"
+#define EXTRUDER_OUT_TEXT_IT                "Ritra"
+#define EXTRUDE_1MM_TEXT_IT                         "1mm"
+#define EXTRUDE_5MM_TEXT_IT                         "5mm"
+#define EXTRUDE_10MM_TEXT_IT                "10mm"
+#define EXTRUDE_LOW_SPEED_TEXT_IT               "Bassa"
+#define EXTRUDE_MEDIUM_SPEED_TEXT_IT    "Media"
+#define EXTRUDE_HIGH_SPEED_TEXT_IT              "Alta"
+
+#define LEVELING_POINT1_TEXT_IT                         "Primo"
+#define LEVELING_POINT2_TEXT_IT                         "Secondo"
+#define LEVELING_POINT3_TEXT_IT                     "Terzo"
+#define LEVELING_POINT4_TEXT_IT                         "Quarto"
+#define LEVELING_POINT5_TEXT_IT                         "Quinto"
+
+#define FILESYS_TEXT_IT                                         "FileSys"
+#define WIFI_TEXT_IT                                        "WIFI"
+#define FAN_TEXT_IT                                                     "Ventola"
+#define ABOUT_TEXT_IT                                           "Circa"
+#define BREAK_POINT_TEXT_IT                                     "Continua"
+#define FILAMENT_TEXT_IT                                        "Filamento"
+#define LANGUAGE_TEXT_IT                                        "Lingua"
+#define MOTOR_OFF_TEXT_IT                                       "Motor off"
+#define MOTOR_OFF_XY_TEXT_IT    "Off-XY"
+#define SHUTDOWN_TEXT_IT                                        "Spento"
+
+#define U_DISK_TEXT_IT                                          "USB"
+#define SD_CARD_TEXT_IT                                         "SD"
+#define WIFI_NAME_TEXT_IT                                       "WIFI: "
+#define WIFI_KEY_TEXT_IT                                        "KEY: "
+#define WIFI_IP_TEXT_IT                                         "IP: "
+#define WIFI_AP_TEXT_IT                                         "Stato: AP"
+#define WIFI_STA_TEXT_IT                                        "Stato: STA"
+#define WIFI_CONNECTED_TEXT_IT                          "Connesso"
+#define WIFI_DISCONNECTED_TEXT_IT                       "Disconnesso"
+#define WIFI_EXCEPTION_TEXT_IT                          "Eccezione"
+#define WIFI_RECONNECT_TEXT_IT         "Reconnect"
+#define CLOUD_TEXT_IT                                           "Cloud"
+#define CLOUD_BIND_IT                                           "Legato"
+#define CLOUD_UNBIND_IT                                         "Libero"
+#define CLOUD_DISCONNECTED_IT                           "Disconnesso"
+#define CLOUD_UNBINDING_IT                                      "Libero"
+#define CLOUD_UNBINDED_IT                                       "Sciolto"
+#define CLOUD_BINDED_IT                                         "Legato"
+#define CLOUD_DISABLE_IT                                        "Disable"
+
+#define FAN_ADD_TEXT_IT                                         "Aumentare"
+#define FAN_DEC_TEXT_IT                                         "Ridurre"
+#define FAN_OPEN_TEXT_IT                                        "100%"
+#define FAN_HALF_TEXT_IT                                        "50%"
+#define FAN_CLOSE_TEXT_IT                                       "Spento"
+#define FAN_TIPS1_TEXT_IT                                       "Ventola"
+#define FAN_TIPS2_TEXT_IT                                       "Ventola\n0"
+
+#define FILAMENT_IN_TEXT_IT                                     "Inser"
+#define FILAMENT_OUT_TEXT_IT                            "Estra"
+#define FILAMENT_EXT0_TEXT_IT                           "Estrude1"
+#define FILAMENT_EXT1_TEXT_IT                           "Estrude2"
+#define FILAMENT_HEAT_TEXT_IT                       "Preriscaldamento"
+#define FILAMENT_STOP_TEXT_IT                           "Stop"
+//#define FILAMENT_CHANGE_TEXT_IT       "Filamento"
+#define FILAMENT_TIPS2_TEXT_IT                          "T:"
+#define FILAMENT_TIPS3_TEXT_IT                          "Inserimento del filamento..."
+#define FILAMENT_TIPS4_TEXT_IT                          "Estrazione del filamento..."
+#define FILAMENT_TIPS5_TEXT_IT                          "Temp is too low to go,please heat"
+#define FILAMENT_TIPS6_TEXT_IT                          "Completato"
+
+#if 0
+  #define FILAMENT_REPLAYS_IDLE_TEXT_IT         "Please click <Estru> or <Ritra> \nto replace filament!"
+  #define FILAMENT_CHANGE_TEXT_IT                               "Please click <Estru> or <Ritra>,\nAfter pinter pause."
+  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_IT             "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_IT           "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_IT           "Heat completed,please load filament to extruder,and click <Conferma> for start loading."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_IT           "Please load filament to extruder,and click <Conferma> for start loading."
+  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_IT          "Heat completed,please click <Conferma> for start unloading.!"
+  #define FILAMENT_DIALOG_LOADING_TIPS_IT                 "Is loading ,please wait!"
+  #define FILAMENT_DIALOG_UNLOADING_TIPS_IT               "Is unloading,please wait!"
+  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_IT           "Load filament completed,click <Conferma> for return!"
+  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_IT         "Unload filament completed,click <Conferma> for return!"
+#endif
+#define FILAMENT_CHANGE_TEXT_IT                               "Please click <Load> \nor <unload>,After \npinter pause."
+#define FILAMENT_DIALOG_LOAD_HEAT_TIPS_IT             "Heating up the nozzle,please wait..."
+#define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_IT           "Heating up the nozzle,please wait..."
+#define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_IT           "Heat completed,please load filament \nto extruder,and click <confirm> \nfor start loading."
+#define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_IT           "Please load filament to extruder,\nand click <confirm> for start loading."
+#define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_IT          "Heat completed,please \nclick <confirm> for start unloading.!"
+#define FILAMENT_DIALOG_LOADING_TIPS_IT                 "Is loading ,please wait!"
+#define FILAMENT_DIALOG_UNLOADING_TIPS_IT               "Is unloading,please wait!"
+#define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_IT           "Load filament completed,\nclick <confirm> for return!"
+#define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_IT         "Unload filament completed,\nclick <confirm> for return!"
+
+
+#define PRE_HEAT_EXT_TEXT_IT                            "E"
+#define PRE_HEAT_BED_TEXT_IT                            "Piano"
+
+#define FILE_LOADING_IT                                 "Caricamento......"
+#if 0
+  #define NO_FILE_AND_CHECK_IT                "Nessun file trovato! Inserisci la scheda SD o il disco U!"
+#endif
+#define NO_FILE_AND_CHECK_IT                            "Nessun file,\n          per favore controllare di nuovo!"
+
+#define NO_FILE_IT                                              "Nessun file!"
+
+#define EXTRUDER_TEMP_TEXT_IT                           "Temper"
+#define EXTRUDER_E_LENGTH1_TEXT_IT          "Estrude1"
+#define EXTRUDER_E_LENGTH2_TEXT_IT          "Estrude2"
+#define EXTRUDER_E_LENGTH3_TEXT_IT          "Estrude3"
+
+#define ABOUT_TYPE_TEXT_IT                                      "Type: "
+#define ABOUT_VERSION_TEXT_IT                           "Firmware: "
+#define ABOUT_WIFI_TEXT_IT                                      "WiFi: "
+
+#define PRINTING_OPERATION_IT                           "Opzioni"
+#define PRINTING_PAUSE_IT                                       "Pause"
+#define PRINTING_TEMP_IT                                        "Temp."
+#define PRINTING_CHANGESPEED_IT                         "Velocità"
+#define PRINTING_RESUME_IT                                      "Recupero"
+#define PRINTING_STOP_IT                                        "Stop"
+#define PRINTING_MORE_IT                                        "Di più"
+#define PRINTING_EXTRUDER_IT                        "Estrude"
+#define PRINTING_MOVE_IT              "Muovi"
+
+#define EXTRUDER_SPEED_IT                                       "Estrude"
+#define MOVE_SPEED_IT                                           "Muovi"
+#define EXTRUDER_SPEED_STATE_IT                         "Estrusione"
+#define MOVE_SPEED_STATE_IT                                     "Movimento"
+#define STEP_1PERCENT_IT                                        "1%"
+#define STEP_5PERCENT_IT                                        "5%"
+#define STEP_10PERCENT_IT                                       "10%"
+
+#define ZOFFSET_IT                          "Z Offset"
+#define ZOFFSET_INC_IT                      "Add"
+#define ZOFFSET_DEC_IT                      "Dec"
+
+#define TITLE_READYPRINT_IT                                             "Pronto"
+#define TITLE_PREHEAT_IT                                                "Preris"
+#define TITLE_MOVE_IT                                                   "Muovi"
+#define TITLE_HOME_IT                                                   "Home"
+#define TITLE_EXTRUDE_IT                                                "Estrude"
+#define TITLE_LEVELING_IT                                               "Livella"
+#define TITLE_SET_IT                                                    "Impostare"
+#define TITLE_MORE_IT                                                   "Di più"
+#define TITLE_CHOOSEFILE_IT                                             "File"
+#define TITLE_PRINTING_IT                                               "Stampa"
+#define TITLE_OPERATION_IT                                              "Opzioni"
+#define TITLE_ADJUST_IT                                                 "Regolare"
+#define TITLE_WIRELESS_IT                                               "Wireless"
+#define TITLE_FILAMENT_IT                                               "Filamento"
+#define TITLE_ABOUT_IT                                                  "Circa"
+#define TITLE_FAN_IT                                                    "Ventola"
+#define TITLE_LANGUAGE_IT                                               "Lingua"
+#define TITLE_PAUSE_IT                                                  "Pausa"
+#define TITLE_CHANGESPEED_IT                                "Velocità"
+#define TITLE_CLOUD_TEXT_IT                                     "Cloud"
+#define TITLE_DIALOG_CONFIRM_IT                         "Confirm"
+#define TITLE_FILESYS_IT                                                        "FileSys"
+#define TITLE_ZOFFSET_IT                          "Z Offset"
+
+#define AUTO_SHUTDOWN_IT                                        "Auto"
+#define MANUAL_SHUTDOWN_IT                                      "Manuale"
+
+#define DIALOG_CONFIRM_IT                                       "Conferma"
+#define DIALOG_CANCLE_IT                                        "Cancella"
+#define DIALOG_OK_IT                                            "OK"
+#define DIALOG_RESET_IT                                         "Resettare"
+#define DIALOG_RETRY_IT                                         "Riprovare"
+#define DIALOG_DISABLE_IT                                       "Disable"
+#define DIALOG_PRINT_MODEL_IT                           "Gcode stampa?"
+#define DIALOG_CANCEL_PRINT_IT                          "Stop stampa?"
+#define DIALOG_STOP_IT                          "Stop"
+#define DIALOG_REPRINT_FROM_BREAKPOINT_IT       "Continua a stampare dal \npunto di interruzione?"
+//#define DIALOG_UNBIND_PRINTER_IT    "Libero?"
+#define DIALOG_ERROR_TIPS1_IT                   "Errore: nessun file, \nper favore controllare di nuovo."
+#define DIALOG_ERROR_TIPS2_IT                   "Errore: operazione non riuscita, \nsi prega di controllare se il baudrate del \ndisplay è lo stesso scheda madre"
+#define DIALOG_ERROR_TIPS3_IT                   "Errore: il nome del file o il \npercorso è troppo lungo!"
+#define DIALOG_CLOSE_MACHINE_IT                 "Closing machine......"
+#define DIALOG_UNBIND_PRINTER_IT                "Unbind the printer?"
+#define DIALOG_FILAMENT_NO_PRESS_IT         "Filament detection switch is not pressed"
+#define DIALOG_PRINT_FINISH_IT              "La stampa è completa!"
+#define DIALOG_PRINT_TIME_IT              "Tempo di stampa: "
+#define DIALOG_REPRINT_IT                 "Print again"
+#define DIALOG_WIFI_ENABLE_TIPS_IT "The wifi module is being configured,\nplease wait a moment....."
+
+#define MESSEGE_PAUSING_IT                      "Parcheggiando..."
+#define MESSEGE_CHANGING_IT                     "Attendere avvio del cambio di filamento"
+#define MESSEGE_UNLOAD_IT                       "Attendere l'espulsione del filamento"
+#define MESSEGE_WAITING_IT                      "Premi per riprendere la stampa"
+#define MESSEGE_INSERT_IT                       "Inserisci il filamento e premi per continuare"
+#define MESSEGE_LOAD_IT                 "Attendere il caricamento del filamento"
+#define MESSEGE_PURGE_IT                        "Attendere lo spurgo del filamento"
+#define MESSEGE_RESUME_IT                       "Attendere la ripresa della stampa..."
+#define MESSEGE_HEAT_IT                 "Premi per riscaldare ugello"
+#define MESSEGE_HEATING_IT                      "Riscaldam. ugello Attendere prego..."
+#define MESSEGE_OPTION_IT                       "Eliminare di più o continuare a stampare?"
+#define MESSEGE_PURGE_MORE_IT   "Epurazione"
+#define MESSEGE_CONTINUE_PRINT_IT   "Stampa"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_ru.h

@@ -0,0 +1,272 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//****************俄语***************************//
+#define TOOL_TEXT_RU                    "инструмент"
+#define PREHEAT_TEXT_RU                 " нагрев"
+#define MOVE_TEXT_RU                    "движение"
+#define HOME_TEXT_RU                    "домой"
+#define PRINT_TEXT_RU                   " печать"
+#define EXTRUDE_TEXT_RU                 "экструзия"
+#define LEVELING_TEXT_RU                "уровень"
+#define AUTO_LEVELING_TEXT_RU           "aвто"
+#define SET_TEXT_RU                     "настройки"
+#define MORE_TEXT_RU                    "больше"
+
+#define ADD_TEXT_RU                     "добавить"
+#define DEC_TEXT_RU                     "уменьшить"
+#define EXTRUDER_1_TEXT_RU              "экструдер1"
+#define EXTRUDER_2_TEXT_RU              "экструдер2"
+#define HEATBED_TEXT_RU                 "стол"
+#define TEXT_1C_RU                      "1℃"
+#define TEXT_5C_RU                      "5℃"
+#define TEXT_10C_RU                     "10℃"
+#define CLOSE_TEXT_RU                   "выкл"
+
+#define BACK_TEXT_RU                    "назад"
+
+#define TOOL_PREHEAT_RU                 "нагрев"
+#define TOOL_EXTRUDE_RU                 "экструзия"
+#define TOOL_MOVE_RU                    "движение"
+#define TOOL_HOME_RU                    "домой"
+#define TOOL_LEVELING_RU                "уровень"
+#define TOOL_AUTO_LEVELING_RU           "aвто"
+#define TOOL_FILAMENT_RU                "замена"
+#define TOOL_MORE_RU                    "больше"
+
+#define AXIS_X_ADD_TEXT_RU              "X+"
+#define AXIS_X_DEC_TEXT_RU              "X-"
+#define AXIS_Y_ADD_TEXT_RU              "Y+"
+#define AXIS_Y_DEC_TEXT_RU              "Y-"
+#define AXIS_Z_ADD_TEXT_RU              "Z+"
+#define AXIS_Z_DEC_TEXT_RU              "Z-"
+#define TEXT_01MM_RU                    "0.1mm"
+#define TEXT_1MM_RU                     "1mm"
+#define TEXT_10MM_RU                    "10mm"
+
+#define HOME_X_TEXT_RU                  "X"
+#define HOME_Y_TEXT_RU                  "Y"
+#define HOME_Z_TEXT_RU                  "Z"
+#define HOME_ALL_TEXT_RU                "Home"
+#define HOME_STOPMOVE_RU                "Quickstop"
+
+#define PAGE_UP_TEXT_RU                 "вверх"
+#define PAGE_DOWN_TEXT_RU               "вниз"
+
+#define EXTRUDER_IN_TEXT_RU             "втянуть"
+#define EXTRUDER_OUT_TEXT_RU            "выдавить"
+#define EXTRUDE_1MM_TEXT_RU             "1mm"
+#define EXTRUDE_5MM_TEXT_RU             "5mm"
+#define EXTRUDE_10MM_TEXT_RU            "10mm"
+#define EXTRUDE_LOW_SPEED_TEXT_RU       "мин"
+#define EXTRUDE_MEDIUM_SPEED_TEXT_RU    "сред"
+#define EXTRUDE_HIGH_SPEED_TEXT_RU      "выс"
+
+#define LEVELING_POINT1_TEXT_RU         "1точка"
+#define LEVELING_POINT2_TEXT_RU         "2точка"
+#define LEVELING_POINT3_TEXT_RU         "3точка"
+#define LEVELING_POINT4_TEXT_RU         "4точка"
+#define LEVELING_POINT5_TEXT_RU         "5точка"
+
+#define FILESYS_TEXT_RU                 "система"
+#define WIFI_TEXT_RU                    "WiFi"
+#define FAN_TEXT_RU                     "вентилятор"
+#define ABOUT_TEXT_RU                   "инфо"
+#define BREAK_POINT_TEXT_RU             "продолжить"
+#define FILAMENT_TEXT_RU                "замена"
+#define LANGUAGE_TEXT_RU                "язык"
+#define MOTOR_OFF_TEXT_RU               "отклмотор"
+#define MOTOR_OFF_XY_TEXT_RU            "Off-XY"
+#define SHUTDOWN_TEXT_RU                "выключение"
+
+#define U_DISK_TEXT_RU                  "U диск"
+#define SD_CARD_TEXT_RU                 "SD диск"
+#define WIFI_NAME_TEXT_RU               "WiFi: "
+#define WIFI_KEY_TEXT_RU                "пароль: "
+#define WIFI_IP_TEXT_RU                 "IP: "
+#define WIFI_AP_TEXT_RU                 "режим: AP"
+#define WIFI_STA_TEXT_RU                "режим: STA"
+#define WIFI_CONNECTED_TEXT_RU          "подключен"
+#define WIFI_DISCONNECTED_TEXT_RU       "не подключен"
+#define WIFI_EXCEPTION_TEXT_RU          "исключение"
+#define WIFI_RECONNECT_TEXT_RU          "Reconnect"
+#define CLOUD_TEXT_RU                   "облако"
+#define CLOUD_BIND_RU                   "соединён"
+#define CLOUD_UNBIND_RU                 "не соединён"
+#define CLOUD_UNBINDING_RU              "Unbinding"
+#define CLOUD_DISCONNECTED_RU           "Disconnected"
+#define CLOUD_UNBINDED_RU               "Unbinded"
+#define CLOUD_BINDED_RU                 "Binded"
+#define CLOUD_DISABLE_RU                "Disable"
+
+#define FAN_ADD_TEXT_RU                 "добавить"
+#define FAN_DEC_TEXT_RU                 "уменьшить"
+#define FAN_OPEN_TEXT_RU                "100%"
+#define FAN_HALF_TEXT_RU                "50%"
+#define FAN_CLOSE_TEXT_RU               "откл"
+#define FAN_TIPS1_TEXT_RU               "вентилятор"
+#define FAN_TIPS2_TEXT_RU               "вентилятор\nоткл"
+
+#define FILAMENT_IN_TEXT_RU             "втянуть"
+#define FILAMENT_OUT_TEXT_RU            "выдавить"
+#define FILAMENT_EXT0_TEXT_RU           "экструдер1"
+#define FILAMENT_EXT1_TEXT_RU           "экструдер2"
+#define FILAMENT_HEAT_TEXT_RU           "нагрев"
+#define FILAMENT_STOP_TEXT_RU           "стоп"
+//#define FILAMENT_CHANGE_TEXT_RU           "замена"
+#define FILAMENT_TIPS2_TEXT_RU          "T:"
+#define FILAMENT_TIPS3_TEXT_RU          "втянуть..."
+#define FILAMENT_TIPS4_TEXT_RU          "вядавить..."
+#define FILAMENT_TIPS5_TEXT_RU          "Низкая температура, \nнеобходим нагрев"
+#define FILAMENT_TIPS6_TEXT_RU          "завершено"
+
+#if 0
+  #define FILAMENT_REPLAYS_IDLE_TEXT_RU                 "Please click <втянуть> or <выдавить> \nto replace filament!"
+  #define FILAMENT_CHANGE_TEXT_RU                       "Please click <втянуть> or <выдавить>,\nAfter pinter pause."
+  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_RU             "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_RU           "Heating up the nozzle,please wait..."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_RU         "Heat completed,please load filament to extruder,and click <да> for start loading."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_RU         "Please load filament to extruder,and click <да> for start loading."
+  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_RU        "Heat completed,please click <да> for start unloading.!"
+  #define FILAMENT_DIALOG_LOADING_TIPS_RU               "Is loading ,please wait!"
+  #define FILAMENT_DIALOG_UNLOADING_TIPS_RU             "Is unloading,please wait!"
+  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_RU         "Load filament completed,click <да> for return!"
+  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_RU       "Unload filament completed,click <да> for return!"
+#endif
+#define FILAMENT_CHANGE_TEXT_RU                       "Please click <Load> \nor <unload>,After \npinter pause."
+#define FILAMENT_DIALOG_LOAD_HEAT_TIPS_RU             "Heating up the nozzle,\nplease wait..."
+#define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_RU           "Heating up the nozzle,\nplease wait..."
+#define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_RU         "Heat completed,please load filament \nto extruder,and click <confirm> \nfor start loading."
+#define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_RU         "Please load filament to extruder,\nand click <confirm> for start loading."
+#define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_RU        "Heat completed,please \nclick <confirm> for start unloading.!"
+#define FILAMENT_DIALOG_LOADING_TIPS_RU               "Is loading ,please wait!"
+#define FILAMENT_DIALOG_UNLOADING_TIPS_RU             "Is unloading,please wait!"
+#define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_RU         "Load filament completed,\nclick <confirm> for return!"
+#define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_RU       "Unload filament completed,\nclick <confirm> for return!"
+
+
+#define PRE_HEAT_EXT_TEXT_RU                "E"
+#define PRE_HEAT_BED_TEXT_RU                "стол"
+
+#define FILE_LOADING_RU                     "загрузка......"
+#if 0
+  #define NO_FILE_AND_CHECK_RU                "Файлы не найдены! Вставьте SD-карту или диск U!"
+#endif
+#define NO_FILE_AND_CHECK_RU                "нет файла,попробуйте ещё раз!"
+
+#define NO_FILE_RU                          "нет файла!"
+
+#define EXTRUDER_TEMP_TEXT_RU               "температура"
+#define EXTRUDER_E_LENGTH1_TEXT_RU          "экструзия1"
+#define EXTRUDER_E_LENGTH2_TEXT_RU          "экструзия2"
+#define EXTRUDER_E_LENGTH3_TEXT_RU          "экструзия3"
+
+#define ABOUT_TYPE_TEXT_RU                  "Type: "
+#define ABOUT_VERSION_TEXT_RU               "Firmware: "
+#define ABOUT_WIFI_TEXT_RU                  "WiFi: "
+
+#define PRINTING_OPERATION_RU               "управление"
+#define PRINTING_PAUSE_RU                   "пауза"
+#define PRINTING_TEMP_RU                    "темп"
+#define PRINTING_CHANGESPEED_RU             "скорости"
+#define PRINTING_RESUME_RU                  "возобновить"
+#define PRINTING_STOP_RU                    "стоп"
+#define PRINTING_MORE_RU                    "больше"
+#define PRINTING_EXTRUDER_RU                "экстр"
+#define PRINTING_MOVE_RU                    "движение"
+
+#define EXTRUDER_SPEED_RU                   "экстр"
+#define MOVE_SPEED_RU                       "движ"
+#define EXTRUDER_SPEED_STATE_RU             "скорость экстр"
+#define MOVE_SPEED_STATE_RU                 "скорость движ"
+#define STEP_1PERCENT_RU                    "1%"
+#define STEP_5PERCENT_RU                    "5%"
+#define STEP_10PERCENT_RU                   "10%"
+
+#define ZOFFSET_RU                          "Z Offset"
+#define ZOFFSET_INC_RU                      "добавить"
+#define ZOFFSET_DEC_RU                      "уменьшить"
+
+#define TITLE_READYPRINT_RU                 "готов к"
+#define TITLE_PREHEAT_RU                    "движение"
+#define TITLE_MOVE_RU                       "движение"
+#define TITLE_HOME_RU                       "Home"
+#define TITLE_EXTRUDE_RU                    "экструзия"
+#define TITLE_LEVELING_RU                   "уровень"
+#define TITLE_SET_RU                        "настройки"
+#define TITLE_MORE_RU                       "больше"
+#define TITLE_CHOOSEFILE_RU                 "файла"
+#define TITLE_PRINTING_RU                   "печать"
+#define TITLE_OPERATION_RU                  "управление"
+#define TITLE_ADJUST_RU                     "регулировать"
+#define TITLE_WIRELESS_RU                   "Wireless"
+#define TITLE_FILAMENT_RU                   "замена"
+#define TITLE_ABOUT_RU                      "инфо"
+#define TITLE_FAN_RU                        "вентилятор"
+#define TITLE_LANGUAGE_RU                   "язык"
+#define TITLE_PAUSE_RU                      "пауза"
+#define TITLE_CHANGESPEED_RU                "скорости"
+#define TILE_TOOL_RU                        "инструмент"
+#define TITLE_CLOUD_TEXT_RU                 "Cloud"
+#define TITLE_DIALOG_CONFIRM_RU             "Confirm"
+#define TITLE_FILESYS_RU                    "FileSys"
+#define TITLE_ZOFFSET_RU                    "Z Offset"
+
+#define AUTO_SHUTDOWN_RU                    "авто-откл"
+#define MANUAL_SHUTDOWN_RU                  "ручн-откл"
+
+#define DIALOG_CONFIRM_RU                   "да"//"подтвердить"
+#define DIALOG_CANCLE_RU                    "отмена"
+#define DIALOG_OK_RU                        "да"
+#define DIALOG_RESET_RU                     "сброс"
+#define DIALOG_RETRY_RU                     "повтор"
+#define DIALOG_DISABLE_RU                   "запретить"
+#define DIALOG_PRINT_MODEL_RU               "печать модели?"
+#define DIALOG_CANCEL_PRINT_RU              "стоп?"
+#define DIALOG_STOP_RU                      "стоп"
+#define DIALOG_REPRINT_FROM_BREAKPOINT_RU   "продолжить?"
+//#define DIALOG_UNBIND_PRINTER_RU          "разрыв?"
+#define DIALOG_ERROR_TIPS1_RU               "ошибка:нет файла, попробуйте ещё раз."
+#define DIALOG_ERROR_TIPS2_RU               "ошибка:сбой передачи. установите скорость \nпередачи данных как на плате управления!"
+#define DIALOG_ERROR_TIPS3_RU               "ошибка: имя файла слишком длинное!"
+#define DIALOG_CLOSE_MACHINE_RU             "Closing machine......"
+#define DIALOG_UNBIND_PRINTER_RU            "Unbind the printer?"
+#define DIALOG_FILAMENT_NO_PRESS_RU         "Filament detection switch is not pressed"
+#define DIALOG_PRINT_FINISH_RU              "Печать завершена!"
+#define DIALOG_PRINT_TIME_RU                "Время печати: "
+#define DIALOG_REPRINT_RU                   "Print again"
+#define DIALOG_WIFI_ENABLE_TIPS_RU          "The wifi module is being configured,\nplease wait a moment....."
+
+#define MESSEGE_PAUSING_RU                  "Стоянка..."
+#define MESSEGE_CHANGING_RU                 "Подождите, пока начнется смена филамента"
+#define MESSEGE_UNLOAD_RU                   "Дождитесь выгрузки нити"
+#define MESSEGE_WAITING_RU                  "Нажмите кнопку,чтобы возобновить печать"
+#define MESSEGE_INSERT_RU                   "Вставьте нить и нажмите кнопку,чтобы продолжить"
+#define MESSEGE_LOAD_RU                     "Дождитесь загрузки нити"
+#define MESSEGE_PURGE_RU                    "Дождитесь чистки нити"
+#define MESSEGE_RESUME_RU                   "Подождите,пока печать возобновится ..."
+#define MESSEGE_HEAT_RU                     "Нажмите кнопку, чтобы нагреть форсунку"
+#define MESSEGE_HEATING_RU                  "Подогрев форсунки Пожалуйста, подождите ..."
+#define MESSEGE_OPTION_RU                   "Очистить больше или продолжить печать?"
+#define MESSEGE_PURGE_MORE_RU               "чистка"
+#define MESSEGE_CONTINUE_PRINT_RU           "Распечатать"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_s_cn.h

@@ -0,0 +1,264 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//*************简体中文***********************//
+#define TOOL_TEXT_CN                "工具"
+#define PREHEAT_TEXT_CN             "预热"
+#define MOVE_TEXT_CN                "移动"
+#define HOME_TEXT_CN                "回零"
+#define PRINT_TEXT_CN               "打印"
+#define EXTRUDE_TEXT_CN             "挤出"
+#define LEVELING_TEXT_CN            "调平"
+#define AUTO_LEVELING_TEXT_CN       "自动调平"
+#define SET_TEXT_CN                 "设置"
+#define MORE_TEXT_CN                "更多"
+
+#define ADD_TEXT_CN                 "增加"
+#define DEC_TEXT_CN                 "减少"
+#define EXTRUDER_1_TEXT_CN          "喷头1"
+#define EXTRUDER_2_TEXT_CN          "喷头2"
+#define HEATBED_TEXT_CN             "热床"
+#define TEXT_1C_CN                  "1℃"
+#define TEXT_5C_CN                  "5℃"
+#define TEXT_10C_CN                 "10℃"
+#define CLOSE_TEXT_CN               "关闭"
+
+#define BACK_TEXT_CN                "返回"
+
+#define TOOL_PREHEAT_CN             "预热"
+#define TOOL_EXTRUDE_CN             "挤出"
+#define TOOL_MOVE_CN                "移动"
+#define TOOL_HOME_CN                "回零"
+#define TOOL_LEVELING_CN            "调平"
+#define TOOL_AUTO_LEVELING_CN       "自动调平"
+#define TOOL_FILAMENT_CN            "换料"
+#define TOOL_MORE_CN                "更多"
+
+#define AXIS_X_ADD_TEXT_CN          "X+"
+#define AXIS_X_DEC_TEXT_CN          "X-"
+#define AXIS_Y_ADD_TEXT_CN          "Y+"
+#define AXIS_Y_DEC_TEXT_CN          "Y-"
+#define AXIS_Z_ADD_TEXT_CN          "Z+"
+#define AXIS_Z_DEC_TEXT_CN          "Z-"
+#define TEXT_01MM_CN                "0.1mm"
+#define TEXT_1MM_CN                 "1mm"
+#define TEXT_10MM_CN                "10mm"
+
+#define HOME_X_TEXT_CN              "X"
+#define HOME_Y_TEXT_CN              "Y"
+#define HOME_Z_TEXT_CN              "Z"
+#define HOME_ALL_TEXT_CN            "回零"
+#define HOME_STOPMOVE_CN            "急停"
+
+#define PAGE_UP_TEXT_CN             "上一页"
+#define PAGE_DOWN_TEXT_CN           "下一页"
+
+#define EXTRUDER_IN_TEXT_CN         "进料"
+#define EXTRUDER_OUT_TEXT_CN        "退料"
+#define EXTRUDE_1MM_TEXT_CN         "1mm"
+#define EXTRUDE_5MM_TEXT_CN         "5mm"
+#define EXTRUDE_10MM_TEXT_CN        "10mm"
+#define EXTRUDE_LOW_SPEED_TEXT_CN   "低速"
+#define EXTRUDE_MEDIUM_SPEED_TEXT_CN "常速"
+#define EXTRUDE_HIGH_SPEED_TEXT_CN  "高速"
+
+#define LEVELING_POINT1_TEXT_CN   "第一点"
+#define LEVELING_POINT2_TEXT_CN   "第二点"
+#define LEVELING_POINT3_TEXT_CN   "第三点"
+#define LEVELING_POINT4_TEXT_CN   "第四点"
+#define LEVELING_POINT5_TEXT_CN   "第五点"
+
+#define FILESYS_TEXT_CN           "文件系统"
+#define WIFI_TEXT_CN              "WIFI"
+#define FAN_TEXT_CN               "风扇"
+#define ABOUT_TEXT_CN             "关于"
+#define BREAK_POINT_TEXT_CN       "断点续打"
+#define FILAMENT_TEXT_CN          "换料"
+#define LANGUAGE_TEXT_CN          "语言"
+#define MOTOR_OFF_TEXT_CN         "关闭电机"
+#define MOTOR_OFF_XY_TEXT_CN      "关闭XY"
+#define SHUTDOWN_TEXT_CN          "关机"
+
+#define U_DISK_TEXT_CN            "U盘"
+#define SD_CARD_TEXT_CN           "SD卡"
+#define WIFI_NAME_TEXT_CN         "无线网络:"
+#define WIFI_KEY_TEXT_CN          "密码: "
+#define WIFI_IP_TEXT_CN           "IP: "
+#define WIFI_AP_TEXT_CN           "状态: AP"
+#define WIFI_STA_TEXT_CN          "状态: STA"
+#define WIFI_CONNECTED_TEXT_CN    "已连接"
+#define WIFI_DISCONNECTED_TEXT_CN "未连接"
+#define WIFI_EXCEPTION_TEXT_CN    "模块异常"
+#define CLOUD_TEXT_CN             "云服务"
+#define CLOUD_BIND_CN             "已绑定"
+#define CLOUD_UNBIND_CN           "解绑"
+#define CLOUD_UNBINDING_CN        "解绑中"
+#define CLOUD_DISCONNECTED_CN     "未连接"
+#define CLOUD_UNBINDED_CN         "未绑定"
+#define CLOUD_BINDED_CN           "已绑定"
+#define CLOUD_DISABLE_CN          "已禁用"
+
+#define FAN_ADD_TEXT_CN           "增加"
+#define FAN_DEC_TEXT_CN           "减少"
+#define FAN_OPEN_TEXT_CN          "100%"
+#define FAN_HALF_TEXT_CN          "50%"
+#define FAN_CLOSE_TEXT_CN         "关闭"
+#define FAN_TIPS1_TEXT_CN         "风扇"
+#define FAN_TIPS2_TEXT_CN         "FAN\nClose"
+
+#define FILAMENT_IN_TEXT_CN       "进料"
+#define FILAMENT_OUT_TEXT_CN      "退料"
+#define FILAMENT_EXT0_TEXT_CN     "喷头1"
+#define FILAMENT_EXT1_TEXT_CN     "喷头2"
+#define FILAMENT_HEAT_TEXT_CN     "预热"
+#define FILAMENT_STOP_TEXT_CN     "停止"
+#if 0
+  #define FILAMENT_REPLAYS_IDLE_TEXT_CN "请按<进料>或<退料>进行换料!"
+  #define FILAMENT_CHANGE_TEXT_CN   "待打印机暂停后,请按<进料>或<退料>进行换料!"
+#else
+  #define FILAMENT_CHANGE_TEXT_CN   "待打印机暂停后,\n请按<进料>或<退料>"
+#endif
+
+#define FILAMENT_DIALOG_LOAD_HEAT_TIPS_CN       "准备进料,正在加热,请稍等!"
+#define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_CN     "准备退料,正在加热,请稍等!"
+#define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_CN   "加热完成,请装载耗材后,按<确定>开始进料!"
+#define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_CN   "请装载耗材,按<确定>开始进料!"
+#define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_CN  "加热完成,请按<确定>开始退料!"
+#define FILAMENT_DIALOG_LOADING_TIPS_CN         "正在进料,请等待耗材加载完成!"
+#define FILAMENT_DIALOG_UNLOADING_TIPS_CN       "正在退料,请等待耗材卸载完成!"
+#define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_CN   "进料完成,请按<确定>返回"
+#define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_CN "退料完成,请按<确定>返回"
+
+#define FILAMENT_TIPS3_TEXT_CN      "正在进料"
+#define FILAMENT_TIPS4_TEXT_CN      "正在退料"
+#define FILAMENT_TIPS5_TEXT_CN      "温度太低,请先预热"
+#define FILAMENT_TIPS6_TEXT_CN      "换料完成"
+
+#define PRE_HEAT_EXT_TEXT_CN        "喷头"
+#define PRE_HEAT_BED_TEXT_CN        "热床"
+
+#define FILE_LOADING_CN             "正在载入......"
+#define NO_FILE_AND_CHECK_CN        "无文件!请插入sd卡或u盘!"
+#define NO_FILE_CN                  "无文件!"
+
+#define EXTRUDER_TEMP_TEXT_CN       "温度"
+#define EXTRUDER_E_LENGTH1_TEXT_CN  "喷头"
+#define EXTRUDER_E_LENGTH2_TEXT_CN  "喷头"
+#define EXTRUDER_E_LENGTH3_TEXT_CN  "喷头"
+
+#define ABOUT_TYPE_TEXT_CN          "Type: "
+#define ABOUT_VERSION_TEXT_CN       "Firmware: "
+#define ABOUT_WIFI_TEXT_CN          "Wifi: "
+
+#define PRINTING_OPERATION_CN       "操作"
+#define PRINTING_PAUSE_CN           "暂停"
+#define PRINTING_TEMP_CN            "温度"
+#define PRINTING_CHANGESPEED_CN     "变速"
+#define PRINTING_RESUME_CN          "恢复"
+#define PRINTING_STOP_CN            "停止"
+#define PRINTING_MORE_CN            "更多"
+#define PRINTING_EXTRUDER_CN        "挤出"
+#define PRINTING_MOVE_CN            "移动"
+
+#define EXTRUDER_SPEED_CN           "挤出"
+#define MOVE_SPEED_CN               "移动"
+#define EXTRUDER_SPEED_STATE_CN     "挤出速度"
+#define MOVE_SPEED_STATE_CN         "移动速度"
+#define STEP_1PERCENT_CN            "1%"
+#define STEP_5PERCENT_CN            "5%"
+#define STEP_10PERCENT_CN           "10%"
+
+#define ZOFFSET_CN                  "Z Offset"
+#define ZOFFSET_INC_CN              "增加"
+#define ZOFFSET_DEC_CN              "减少"
+
+#define TITLE_READYPRINT_CN         "准备打印"
+#define TITLE_PREHEAT_CN            "预热"
+#define TITLE_MOVE_CN               "移动"
+#define TITLE_HOME_CN               "回零"
+#define TITLE_EXTRUDE_CN            "挤出"
+#define TITLE_LEVELING_CN           "调平"
+#define TITLE_SET_CN                "设置"
+#define TITLE_MORE_CN               "更多"
+#define TITLE_CHOOSEFILE_CN         "选择文件"
+#define TITLE_PRINTING_CN           "正在打印"
+#define TITLE_OPERATION_CN          "操作"
+#define TITLE_ADJUST_CN             "调整"
+#define TITLE_WIRELESS_CN           "无线网络"
+#define TITLE_FILAMENT_CN           "换料"
+#define TITLE_ABOUT_CN              "关于"
+#define TITLE_FAN_CN                "风扇"
+#define TITLE_LANGUAGE_CN           "语言"
+#define TITLE_PAUSE_CN              "暂停"
+#define TITLE_CHANGESPEED_CN        "变速"
+#define TITLE_CLOUD_TEXT_CN         "云服务"
+#define TITLE_DIALOG_CONFIRM_CN     "确认"
+#define TITLE_FILESYS_CN            "文件系统"
+#define TITLE_ZOFFSET_CN            "Z Offset"
+
+#define AUTO_SHUTDOWN_CN            "自动关机"
+#define MANUAL_SHUTDOWN_CN          "手动关机"
+
+#define DIALOG_CONFIRM_CN           "确定"
+#define DIALOG_CANCLE_CN            "取消"
+#define DIALOG_OK_CN                "确认"
+#define DIALOG_RESET_CN             "重置"
+#define DIALOG_DISABLE_CN           "禁用"
+#define DIALOG_PRINT_MODEL_CN       "打印模型?"
+#define DIALOG_CANCEL_PRINT_CN      "停止打印?"
+#define DIALOG_RETRY_CN             "重试"
+#define DIALOG_STOP_CN              "停止"
+#define DIALOG_REPRINT_FROM_BREAKPOINT_CN   "从断点续打?"
+//#define DIALOG_UNBIND_PRINTER_CN  "解除绑定 ?"
+#define DIALOG_ERROR_TIPS1_CN       "错误:找不到文件,请插入sd卡/u盘!"
+#define DIALOG_ERROR_TIPS2_CN       "错误:通信失败,请检查波特率或主板硬件!"
+#define DIALOG_ERROR_TIPS3_CN       "错误:文件名或文件路径太长 !"
+#define DIALOG_CLOSE_MACHINE_CN     "正在关机......"
+#define DIALOG_UNBIND_PRINTER_CN    "解除绑定?"
+#define DIALOG_FILAMENT_NO_PRESS_CN "请先装载耗材!"
+#define DIALOG_PRINT_FINISH_CN      "打印完成!"
+#define DIALOG_PRINT_TIME_CN        "打印时间: "
+#define DIALOG_REPRINT_CN           "再打印一次"
+#define DIALOG_WIFI_ENABLE_TIPS_CN  "wifi模块正在配置中,请稍等......"
+
+#define TEXT_VALUE_CN               "%d℃/%d℃"
+#define EXTRUDE_TEXT_VALUE_T_CN     ": %d℃"
+#define WIFI_RECONNECT_TEXT_CN      "重新连接"
+
+#define PRINTING_GBK                "正在打印"
+#define PRINTING_OPERATION_GBK      "操作"
+#define PRINTING_PAUSE_GBK          "暂停"
+
+#define MESSEGE_PAUSING_CN          "暂停中..."
+#define MESSEGE_CHANGING_CN         "等待换料开始..."
+#define MESSEGE_UNLOAD_CN           "退料中,请稍等..."
+#define MESSEGE_WAITING_CN          "点击按钮恢复打印"
+#define MESSEGE_INSERT_CN           "装载耗材后,点击按钮开始打印"
+#define MESSEGE_LOAD_CN             "进料中,请稍等..."
+#define MESSEGE_PURGE_CN            "等待挤出..."
+#define MESSEGE_RESUME_CN           "等待恢复打印..."
+#define MESSEGE_HEAT_CN             "按下按钮,加热喷头"
+#define MESSEGE_HEATING_CN          "喷头加热中,请等待..."
+#define MESSEGE_OPTION_CN           "挤出更多还是继续打印?"
+#define MESSEGE_PURGE_MORE_CN       "挤出"
+#define MESSEGE_CONTINUE_PRINT_CN   "打印"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_sp.h

@@ -0,0 +1,279 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//****************西班牙语***************************
+#define TOOL_TEXT_SP            "Ajustes"
+#define PREHEAT_TEXT_SP         "Precalentar"//"precalent\nar"
+#define MOVE_TEXT_SP            "Mover"
+#define HOME_TEXT_SP            "Origen"
+#define PRINT_TEXT_SP           "Imprimir"
+#define EXTRUDE_TEXT_SP         "Extrusor"
+#define LEVELING_TEXT_SP        "Leveling"//"nivelac\nión"
+#define AUTO_LEVELING_TEXT_SP   "Autolevel"//"auto\nnivelación"
+#define SET_TEXT_SP             "Config"
+#define MORE_TEXT_SP            "Más"
+
+#define ADD_TEXT_SP             "Más"
+#define DEC_TEXT_SP             "Menos"
+#define EXTRUDER_1_TEXT_SP      "Extrusor1: "
+#define EXTRUDER_2_TEXT_SP      "Extrusor2: "
+#define HEATBED_TEXT_SP         "Cama: "
+#define TEXT_1C_SP              "1℃"
+#define TEXT_5C_SP              "5℃"
+#define TEXT_10C_SP             "10℃"
+#define CLOSE_TEXT_SP           "Apagar"
+
+#define BACK_TEXT_SP            "Atrás"
+
+#define TOOL_PREHEAT_SP         "Precalentar"
+#define TOOL_EXTRUDE_SP         "Extrusor"
+#define TOOL_MOVE_SP            "Mover"
+#define TOOL_HOME_SP            "Origen"
+#define TOOL_LEVELING_SP        "Leveling"
+#define TOOL_AUTO_LEVELING_SP   "Autolevel"
+#define TOOL_FILAMENT_SP        "Filamento"
+#define TOOL_MORE_SP            "Más"
+
+#define AXIS_X_ADD_TEXT_SP      "X+"
+#define AXIS_X_DEC_TEXT_SP      "X-"
+#define AXIS_Y_ADD_TEXT_SP      "Y+"
+#define AXIS_Y_DEC_TEXT_SP      "Y-"
+#define AXIS_Z_ADD_TEXT_SP      "Z+"
+#define AXIS_Z_DEC_TEXT_SP      "Z-"
+#define TEXT_01MM_SP            "0.1mm"
+#define TEXT_1MM_SP             "1mm"
+#define TEXT_10MM_SP            "10mm"
+
+#define HOME_X_TEXT_SP          "EJE X"
+#define HOME_Y_TEXT_SP          "EJE Y"
+#define HOME_Z_TEXT_SP          "EJE Z"
+#define HOME_ALL_TEXT_SP        "TODOS"
+#define HOME_STOPMOVE_SP        "Quickstop"
+
+#define PAGE_UP_TEXT_SP         "Arriba"
+#define PAGE_DOWN_TEXT_SP       "Abajo"
+
+#define EXTRUDER_IN_TEXT_SP             "Dentro"
+#define EXTRUDER_OUT_TEXT_SP            "Fuera"
+#define EXTRUDE_1MM_TEXT_SP             "1mm"
+#define EXTRUDE_5MM_TEXT_SP             "5mm"
+#define EXTRUDE_10MM_TEXT_SP            "10mm"
+#define EXTRUDE_LOW_SPEED_TEXT_SP       "Baja"
+#define EXTRUDE_MEDIUM_SPEED_TEXT_SP    "Media"
+#define EXTRUDE_HIGH_SPEED_TEXT_SP      "Alta"
+
+#define LEVELING_POINT1_TEXT_SP         "Primero"
+#define LEVELING_POINT2_TEXT_SP         "Segundo"
+#define LEVELING_POINT3_TEXT_SP         "Tercero"
+#define LEVELING_POINT4_TEXT_SP         "Cuarto"
+#define LEVELING_POINT5_TEXT_SP         "Quinto"
+
+#define FILESYS_TEXT_SP         "Puerto"
+#define WIFI_TEXT_SP            "WiFi"
+#define FAN_TEXT_SP             "Ventilador"
+#define ABOUT_TEXT_SP           "Acerca"
+#define BREAK_POINT_TEXT_SP     "Continuar"
+#define FILAMENT_TEXT_SP        "Filamento"
+#define LANGUAGE_TEXT_SP        "Language"
+#define MOTOR_OFF_TEXT_SP       "Apagar motor"
+#define MOTOR_OFF_XY_TEXT_SP    "Off-XY"
+#define SHUTDOWN_TEXT_SP        "Apagar"
+
+#define U_DISK_TEXT_SP              "PENDRIVE"
+#define SD_CARD_TEXT_SP             "SD"
+#define WIFI_NAME_TEXT_SP           "WIFI: "
+#define WIFI_KEY_TEXT_SP            "Contraseña: "
+#define WIFI_IP_TEXT_SP             "IP: "
+#define WIFI_AP_TEXT_SP             "Estado: AP"
+#define WIFI_STA_TEXT_SP            "Estado: STA"
+#define WIFI_CONNECTED_TEXT_SP      "Conectado"
+#define WIFI_DISCONNECTED_TEXT_SP   "Desconectado"
+#define WIFI_EXCEPTION_TEXT_SP      "Excepción"
+#define WIFI_RECONNECT_TEXT_SP      "Reconnect"
+#define CLOUD_TEXT_SP               "Nube"
+#define CLOUD_BIND_SP               "Atado"
+#define CLOUD_UNBIND_SP             "Sin atar"
+#define CLOUD_UNBINDING_SP          "Unbinding"
+#define CLOUD_DISCONNECTED_SP       "Disconnected"
+#define CLOUD_UNBINDED_SP           "Unbinded"
+#define CLOUD_BINDED_SP             "Binded"
+#define CLOUD_DISABLE_SP            "Disable"
+
+#define FAN_ADD_TEXT_SP             "Más"
+#define FAN_DEC_TEXT_SP             "Menos"
+#define FAN_OPEN_TEXT_SP            "100%"
+#define FAN_HALF_TEXT_SP            "50%"
+#define FAN_CLOSE_TEXT_SP           "0%"
+#define FAN_TIPS1_TEXT_SP           "ventilador"
+#define FAN_TIPS2_TEXT_SP           "ventilador\n0"
+
+#define FILAMENT_IN_TEXT_SP         "Dentro"
+#define FILAMENT_OUT_TEXT_SP        "Fuera"
+#define FILAMENT_EXT0_TEXT_SP       "Extrusor1"
+#define FILAMENT_EXT1_TEXT_SP       "Extrusor2"
+#define FILAMENT_HEAT_TEXT_SP       "Precalentar"
+#define FILAMENT_STOP_TEXT_SP       "Parar"
+//#define FILAMENT_CHANGE_TEXT_SP   "Filamento"
+#define FILAMENT_TIPS2_TEXT_SP      "T:"
+#define FILAMENT_TIPS3_TEXT_SP      "Dentro..."
+#define FILAMENT_TIPS4_TEXT_SP      "Fuera..."
+#define FILAMENT_TIPS5_TEXT_SP      "Temperatura demasiado baja, por favor calentar"
+#define FILAMENT_TIPS6_TEXT_SP      "Completado"
+#if 0
+  #define FILAMENT_REPLAYS_IDLE_TEXT_SP           "Please click <Dentro> or <Fuera> \nto replace filament!"
+  #define FILAMENT_CHANGE_TEXT_SP                 "Please click <Dentro> or <Fuera>,\nAfter pinter pause."
+  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_SP       "Calentando el extrusor, por favor espere..."
+  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_SP     "Calentando el extrusor, por favor espere..."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_SP   "Temperatura alcanzada.Inserte el filamento y luego presione\"Confirmar\"para comenzar la carga."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_SP   "Inserte el filamento y luego presione\"Confirmar\"para comenzar la carga."
+  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_SP  "Temperatura alcanzada.Presione\"Confirmar\"para retirar el filamento."
+  #define FILAMENT_DIALOG_LOADING_TIPS_SP         "Cargando filamento,por favor espere."
+  #define FILAMENT_DIALOG_UNLOADING_TIPS_SP       "Retirando filamento,por favor espere."
+  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_SP   "Filamento cargado,presione\"Confirmar\"."
+  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_SP "Filamento retirado,presione\"Confirmar\"."
+#else
+  #define FILAMENT_CHANGE_TEXT_SP                 "Please click <Load> \nor <unload>,After \npinter pause."
+  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_SP       "Calentando el extrusor,\npor favor espere..."
+  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_SP     "Calentando el extrusor,\npor favor espere..."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_SP   "Temperatura alcanzada.Inserte el \nfilamento y luego presione\"Confirmar\"\npara comenzar la carga."
+  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_SP   "Inserte el filamento y \nluego presione\"Confirmar\"para \ncomenzar la carga."
+  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_SP  "Temperatura alcanzada.\nPresione\"Confirmar\"para retirar \nel filamento."
+  #define FILAMENT_DIALOG_LOADING_TIPS_SP         "Cargando filamento,\npor favor espere."
+  #define FILAMENT_DIALOG_UNLOADING_TIPS_SP       "Retirando filamento,\npor favor espere."
+  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_SP   "Filamento cargado,\npresione\"Confirmar\"."
+  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_SP "Filamento retirado,\npresione\"Confirmar\"."
+#endif
+
+#define PRE_HEAT_EXT_TEXT_SP        "Extrusor"
+#define PRE_HEAT_BED_TEXT_SP        "cama"
+
+#define FILE_LOADING_SP             "Cargando......"
+#if 0
+  #define NO_FILE_AND_CHECK_SP        "No se encontraron archivos! Por favor, inserte la tarjeta SD o el disco U!"
+#endif
+#define NO_FILE_AND_CHECK_SP        "Archivo no encontrado,\n         por favor insertar SD o disco USB!"
+
+#define NO_FILE_SP                  "Sin archivo!"
+
+
+
+#define EXTRUDER_TEMP_TEXT_SP       "Temper"
+#define EXTRUDER_E_LENGTH1_TEXT_SP  "Extrusor1"
+#define EXTRUDER_E_LENGTH2_TEXT_SP  "Extrusor2"
+#define EXTRUDER_E_LENGTH3_TEXT_SP  "Extrusor3"
+
+#define ABOUT_TYPE_TEXT_SP          "Pantalla: "
+#define ABOUT_VERSION_TEXT_SP       "Firmware: "
+#define ABOUT_WIFI_TEXT_SP          "WiFi: "
+
+#define PRINTING_OPERATION_SP       "Ajustes"
+#define PRINTING_PAUSE_SP           "Pausar"
+#define PRINTING_TEMP_SP            "Temp."
+#define PRINTING_CHANGESPEED_SP     "Velocidad"
+#define PRINTING_RESUME_SP          "Resumir"
+#define PRINTING_STOP_SP            "Detener"
+#define PRINTING_MORE_SP            "Más"
+#define PRINTING_EXTRUDER_SP        "Extrusor"
+#define PRINTING_MOVE_SP            "Mover"
+
+#define EXTRUDER_SPEED_SP           "Extrusor"
+#define MOVE_SPEED_SP               "Mover"
+#define EXTRUDER_SPEED_STATE_SP     "Extrusión"
+#define MOVE_SPEED_STATE_SP         "Movimiento"
+#define STEP_1PERCENT_SP            "1%"
+#define STEP_5PERCENT_SP            "5%"
+#define STEP_10PERCENT_SP           "10%"
+
+#define ZOFFSET_SP                  "Z Offset"
+#define ZOFFSET_INC_SP              "Más"
+#define ZOFFSET_DEC_SP              "Menos"
+
+#define TITLE_READYPRINT_SP         "Inicio"
+#define TITLE_PREHEAT_SP            "Precalentar"
+#define TITLE_MOVE_SP               "Mover"
+#define TITLE_HOME_SP               "Origen"
+#define TITLE_EXTRUDE_SP            "Extrusor"
+#define TITLE_LEVELING_SP           "Leveling"
+#define TITLE_SET_SP                "Config"
+#define TITLE_MORE_SP               "Más"
+#define TITLE_CHOOSEFILE_SP         "Imprimir"
+#define TITLE_PRINTING_SP           "Imprimir"
+#define TITLE_OPERATION_SP          "Ajustes"
+#define TITLE_ADJUST_SP             "Temp."
+#define TITLE_WIRELESS_SP           "Wireless"
+#define TITLE_FILAMENT_SP           "Filamento"
+#define TITLE_ABOUT_SP              "Acerca"
+#define TITLE_FAN_SP                "Ventilador"
+#define TITLE_LANGUAGE_SP           "Language"
+#define TITLE_PAUSE_SP              "Pausar"
+#define TITLE_CHANGESPEED_SP        "Velocidad"
+#define TILE_TOOL_SP                "Ajustes"
+#define TITLE_CLOUD_TEXT_SP         "Cloud"
+#define TITLE_DIALOG_CONFIRM_SP     "Confirmar"
+#define TITLE_FILESYS_SP            "Puerto"
+#define TITLE_ZOFFSET_SP            "Z Offset"
+
+#define AUTO_SHUTDOWN_SP            "Auto"
+#define MANUAL_SHUTDOWN_SP          "manual"
+
+#define DIALOG_CONFIRM_SP           "Confirmar"
+#define DIALOG_CANCLE_SP            "Cancelar"
+#define DIALOG_OK_SP                "OK"
+#define DIALOG_RESET_SP             "Resetear"
+#define DIALOG_RETRY_SP             "Reintentar"
+#define DIALOG_DISABLE_SP           "Desactivar"
+#define DIALOG_PRINT_MODEL_SP       "¿Está seguro?"
+#define DIALOG_CANCEL_PRINT_SP      "¿Está seguro que desea detener la impresión?"
+
+#define DIALOG_RETRY_SP               "Reintentar"
+#define DIALOG_STOP_SP                "Stop"
+#define DIALOG_REPRINT_FROM_BREAKPOINT_SP   "Reprint from breakpoint?"
+//#define DIALOG_UNBIND_PRINTER_SP    "Unbind the printer?"
+#define DIALOG_ERROR_TIPS1_SP         "Error:archivo no encontrado, \npor favor insertar SD o disco USB."
+#define DIALOG_ERROR_TIPS2_SP         "error:transacción fallida, \nconfigurar  baudrate del \ndisplay para la placa base!"
+#define DIALOG_ERROR_TIPS3_SP         "Error : nombre de archivo o \nruta demasiado largo!"
+#define DIALOG_CLOSE_MACHINE_SP       "Closing machine......"
+#define DIALOG_UNBIND_PRINTER_SP      "Unbind the printer?"
+#define DIALOG_FILAMENT_NO_PRESS_SP   "Filament detection switch is not pressed"
+#define DIALOG_PRINT_FINISH_SP        "¡La impresión está completa!"
+#define DIALOG_PRINT_TIME_SP          "Tiempo de impresión: "
+#define DIALOG_REPRINT_SP             "Print again"
+#define DIALOG_WIFI_ENABLE_TIPS_SP    "The wifi module is being configured,\nplease wait a moment....."
+
+#define PRINTING_SP                 "Imprimiendo"
+#define PRINTING_AJUSTES_SP         "Ajustes"
+#define PRINTING_PAUSAR_SP          "Pausar"
+
+#define MESSEGE_PAUSING_SP          "Aparcando..."
+#define MESSEGE_CHANGING_SP         "Esperando para iniciar el cambio de filamento"
+#define MESSEGE_UNLOAD_SP           "Espere para liberar el filamento"
+#define MESSEGE_WAITING_SP          "Pulsar el botón para reanudar impresión"
+#define MESSEGE_INSERT_SP           "Inserte el filamento y pulse el botón para continuar..."
+#define MESSEGE_LOAD_SP             "Espere para purgar el filamento"
+#define MESSEGE_PURGE_SP            "Espere para purgar el filamento"
+#define MESSEGE_RESUME_SP           "Esperando impresora para reanudar..."
+#define MESSEGE_HEAT_SP             "Pulse el botón para calentar la boquilla"
+#define MESSEGE_HEATING_SP          "Calentando boquilla Espere por favor..."
+#define MESSEGE_OPTION_SP           "¿Purgar más o continuar con la impresión?"
+#define MESSEGE_PURGE_MORE_SP       "Purga"
+#define MESSEGE_CONTINUE_PRINT_SP   "Impresión"

Marlin/src/lcd/extui/lib/mks_ui/tft_fsmc.cpp

@@ -0,0 +1,273 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../../../inc/MarlinConfig.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+  #if defined(ARDUINO_ARCH_STM32F1) && PIN_EXISTS(FSMC_CS) // FSMC on 100/144 pins SoCs
+
+    #include <libmaple/fsmc.h>
+    #include <libmaple/gpio.h>
+    #include <libmaple/dma.h>
+    #include <boards.h>
+
+/* Timing configuration */
+    #define FSMC_ADDRESS_SETUP_TIME   15// AddressSetupTime
+    #define FSMC_DATA_SETUP_TIME      15// DataSetupTime
+
+    void LCD_IO_Init(uint8_t cs, uint8_t rs);
+    void LCD_IO_WriteData(uint16_t RegValue);
+    void LCD_IO_WriteReg(uint16_t Reg);
+    uint16_t LCD_IO_ReadData(uint16_t RegValue);
+    uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize);
+    uint16_t ILI9488_ReadRAM();
+    #ifdef LCD_USE_DMA_FSMC
+      void LCD_IO_WriteMultiple(uint16_t data, uint32_t count);
+      void LCD_IO_WriteSequence(uint16_t *data, uint16_t length);
+    #endif
+
+/**
+ * FSMC LCD IO
+ */
+    #define __ASM __asm
+    #define __STATIC_INLINE static inline
+
+    __attribute__((always_inline)) __STATIC_INLINE void __DSB() {__ASM volatile ("dsb 0xF" ::: "memory");}
+
+    #define FSMC_CS_NE1   PD7
+
+    #if ENABLED(STM32_XL_DENSITY)
+      #define FSMC_CS_NE2 PG9
+      #define FSMC_CS_NE3 PG10
+      #define FSMC_CS_NE4 PG12
+
+      #define FSMC_RS_A0  PF0
+      #define FSMC_RS_A1  PF1
+      #define FSMC_RS_A2  PF2
+      #define FSMC_RS_A3  PF3
+      #define FSMC_RS_A4  PF4
+      #define FSMC_RS_A5  PF5
+      #define FSMC_RS_A6  PF12
+      #define FSMC_RS_A7  PF13
+      #define FSMC_RS_A8  PF14
+      #define FSMC_RS_A9  PF15
+      #define FSMC_RS_A10 PG0
+      #define FSMC_RS_A11 PG1
+      #define FSMC_RS_A12 PG2
+      #define FSMC_RS_A13 PG3
+      #define FSMC_RS_A14 PG4
+      #define FSMC_RS_A15 PG5
+    #endif
+
+    #define FSMC_RS_A16   PD11
+    #define FSMC_RS_A17   PD12
+    #define FSMC_RS_A18   PD13
+    #define FSMC_RS_A19   PE3
+    #define FSMC_RS_A20   PE4
+    #define FSMC_RS_A21   PE5
+    #define FSMC_RS_A22   PE6
+    #define FSMC_RS_A23   PE2
+
+    #if ENABLED(STM32_XL_DENSITY)
+      #define FSMC_RS_A24 PG13
+      #define FSMC_RS_A25 PG14
+    #endif
+
+    static uint8_t fsmcInit = 0;
+
+    typedef struct {
+      __IO uint16_t REG;
+      __IO uint16_t RAM;
+    } LCD_CONTROLLER_TypeDef;
+
+    LCD_CONTROLLER_TypeDef *LCD;
+
+    void LCD_IO_Init(uint8_t cs, uint8_t rs) {
+      uint32_t controllerAddress;
+
+      if (fsmcInit) return;
+      fsmcInit = 1;
+
+      switch (cs) {
+        case FSMC_CS_NE1: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION1; break;
+          #if ENABLED(STM32_XL_DENSITY)
+        case FSMC_CS_NE2: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION2; break;
+        case FSMC_CS_NE3: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION3; break;
+        case FSMC_CS_NE4: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION4; break;
+          #endif
+        default: return;
+      }
+
+      #define _ORADDR(N) controllerAddress |= (_BV32(N) - 2)
+
+      switch (rs) {
+        #if ENABLED(STM32_XL_DENSITY)
+        case FSMC_RS_A0:  _ORADDR( 1); break;
+        case FSMC_RS_A1:  _ORADDR( 2); break;
+        case FSMC_RS_A2:  _ORADDR( 3); break;
+        case FSMC_RS_A3:  _ORADDR( 4); break;
+        case FSMC_RS_A4:  _ORADDR( 5); break;
+        case FSMC_RS_A5:  _ORADDR( 6); break;
+        case FSMC_RS_A6:  _ORADDR( 7); break;
+        case FSMC_RS_A7:  _ORADDR( 8); break;
+        case FSMC_RS_A8:  _ORADDR( 9); break;
+        case FSMC_RS_A9:  _ORADDR(10); break;
+        case FSMC_RS_A10: _ORADDR(11); break;
+        case FSMC_RS_A11: _ORADDR(12); break;
+        case FSMC_RS_A12: _ORADDR(13); break;
+        case FSMC_RS_A13: _ORADDR(14); break;
+        case FSMC_RS_A14: _ORADDR(15); break;
+        case FSMC_RS_A15: _ORADDR(16); break;
+        #endif
+        case FSMC_RS_A16: _ORADDR(17); break;
+        case FSMC_RS_A17: _ORADDR(18); break;
+        case FSMC_RS_A18: _ORADDR(19); break;
+        case FSMC_RS_A19: _ORADDR(20); break;
+        case FSMC_RS_A20: _ORADDR(21); break;
+        case FSMC_RS_A21: _ORADDR(22); break;
+        case FSMC_RS_A22: _ORADDR(23); break;
+        case FSMC_RS_A23: _ORADDR(24); break;
+          #if ENABLED(STM32_XL_DENSITY)
+        case FSMC_RS_A24: _ORADDR(25); break;
+        case FSMC_RS_A25: _ORADDR(26); break;
+          #endif
+        default: return;
+      }
+
+      rcc_clk_enable(RCC_FSMC);
+
+      gpio_set_mode(GPIOD, 14, GPIO_AF_OUTPUT_PP); // FSMC_D00
+      gpio_set_mode(GPIOD, 15, GPIO_AF_OUTPUT_PP); // FSMC_D01
+      gpio_set_mode(GPIOD,  0, GPIO_AF_OUTPUT_PP);// FSMC_D02
+      gpio_set_mode(GPIOD,  1, GPIO_AF_OUTPUT_PP);// FSMC_D03
+      gpio_set_mode(GPIOE,  7, GPIO_AF_OUTPUT_PP);// FSMC_D04
+      gpio_set_mode(GPIOE,  8, GPIO_AF_OUTPUT_PP);// FSMC_D05
+      gpio_set_mode(GPIOE,  9, GPIO_AF_OUTPUT_PP);// FSMC_D06
+      gpio_set_mode(GPIOE, 10, GPIO_AF_OUTPUT_PP); // FSMC_D07
+      gpio_set_mode(GPIOE, 11, GPIO_AF_OUTPUT_PP); // FSMC_D08
+      gpio_set_mode(GPIOE, 12, GPIO_AF_OUTPUT_PP); // FSMC_D09
+      gpio_set_mode(GPIOE, 13, GPIO_AF_OUTPUT_PP); // FSMC_D10
+      gpio_set_mode(GPIOE, 14, GPIO_AF_OUTPUT_PP); // FSMC_D11
+      gpio_set_mode(GPIOE, 15, GPIO_AF_OUTPUT_PP); // FSMC_D12
+      gpio_set_mode(GPIOD,  8, GPIO_AF_OUTPUT_PP);// FSMC_D13
+      gpio_set_mode(GPIOD,  9, GPIO_AF_OUTPUT_PP);// FSMC_D14
+      gpio_set_mode(GPIOD, 10, GPIO_AF_OUTPUT_PP); // FSMC_D15
+
+      gpio_set_mode(GPIOD,  4, GPIO_AF_OUTPUT_PP);// FSMC_NOE
+      gpio_set_mode(GPIOD,  5, GPIO_AF_OUTPUT_PP);// FSMC_NWE
+
+      gpio_set_mode(PIN_MAP[cs].gpio_device, PIN_MAP[cs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_CS_NEx
+      gpio_set_mode(PIN_MAP[rs].gpio_device, PIN_MAP[rs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_RS_Ax
+
+      #if ENABLED(STM32_XL_DENSITY)
+        FSMC_NOR_PSRAM4_BASE->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN;
+        FSMC_NOR_PSRAM4_BASE->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME;
+      #else // PSRAM1 for STM32F103V (high density)
+        FSMC_NOR_PSRAM1_BASE->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN;
+        FSMC_NOR_PSRAM1_BASE->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME;
+      #endif
+
+      afio_remap(AFIO_REMAP_FSMC_NADV);
+
+      LCD = (LCD_CONTROLLER_TypeDef*)controllerAddress;
+    }
+
+    void LCD_IO_WriteData(uint16_t RegValue) {
+      LCD->RAM = RegValue;
+      __DSB();
+    }
+
+    void LCD_IO_WriteReg(uint16_t Reg) {
+      LCD->REG = Reg;
+      __DSB();
+    }
+
+    uint16_t LCD_IO_ReadData(uint16_t RegValue) {
+      LCD->REG = RegValue;
+      __DSB();
+
+      return LCD->RAM;
+    }
+
+    uint16_t ILI9488_ReadRAM() {
+      uint16_t data;
+      data = LCD->RAM;
+      return data;
+    }
+
+    uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize) {
+      volatile uint32_t data;
+      LCD->REG = RegValue;
+      __DSB();
+
+      data = LCD->RAM; // dummy read
+      data = LCD->RAM & 0x00FF;
+
+      while (--ReadSize) {
+        data <<= 8;
+        data |= (LCD->RAM & 0x00FF);
+      }
+      return uint32_t(data);
+    }
+
+    #if ENABLED(LCD_USE_DMA_FSMC)
+
+    void LCD_IO_WriteMultiple(uint16_t color, uint32_t count) {
+      while (count > 0) {
+        dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, &color, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM);
+        dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, count > 65535 ? 65535 : count);
+        dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+        dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+
+        while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & 0x0A) == 0) {}
+        dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+
+        count = count > 65535 ? count - 65535 : 0;
+      }
+    }
+
+    void LCD_IO_WriteSequence(uint16_t *data, uint16_t length) {
+      dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, data, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM | DMA_PINC_MODE);
+      dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, length);
+      dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+      dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+
+      while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & 0x0A) == 0) {}
+      dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+    }
+
+    void LCD_IO_WriteSequence_Async(uint16_t *data, uint16_t length) {
+      dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, data, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM | DMA_PINC_MODE);
+      dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, length);
+      dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+      dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+    }
+
+    void LCD_IO_WaitSequence_Async() {
+      while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & 0x0A) == 0) {}
+      dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+    }
+
+    #endif // LCD_USE_DMA_FSMC
+  #endif // ARDUINO_ARCH_STM32F1 && FSMC_CS_PIN
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/tft_fsmc.h

@@ -0,0 +1,30 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" { /* C-declarations for C++ */
+#endif
+
+#ifdef __cplusplus
+} /* C-declarations for C++ */
+#endif

Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp

@@ -0,0 +1,791 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * @file lcd_lvgl_configuration.c
+ * @date    2020-02-21
+ */
+
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(TFT_LITTLE_VGL_UI)
+
+  #include "../../../../MarlinCore.h"
+
+  #include "tft_lvgl_configuration.h"
+  #include "lvgl.h"
+  #include "../../../../feature/touch/xpt2046.h"
+  #include "draw_ready_print.h"
+  #include "W25Qxx.h"
+  #include "pic_manager.h"
+
+  #include "mks_hardware_test.h"
+  #include "draw_ui.h"
+
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    #include "../../../../feature/powerloss.h"
+  #endif
+
+  #include <SPI.h>
+
+  #if ENABLED(SPI_GRAPHICAL_TFT)
+    #include "SPI_TFT.h"
+  #endif
+
+//#include "../../Configuration.h"
+//#include "../../src/core/macros.h"
+
+  extern void LCD_IO_Init(uint8_t cs, uint8_t rs);
+  extern void LCD_IO_WriteData(uint16_t RegValue);
+  extern void LCD_IO_WriteReg(uint16_t Reg);
+
+  extern void LCD_IO_WriteMultiple(uint16_t color, uint32_t count);
+
+  extern void init_gb2312_font();
+
+  static lv_disp_buf_t disp_buf;
+//static lv_color_t buf[LV_HOR_RES_MAX * 18];
+//static lv_color_t buf[10*5];
+//extern lv_obj_t * scr;
+  #if ENABLED(SDSUPPORT)
+    extern void UpdatePic();
+    extern void UpdateFont();
+  #endif
+  uint16_t DeviceCode = 0x9488;
+  extern uint8_t sel_id;
+
+  #define SetCs
+  #define ClrCs
+
+  #define  HDP  799//Horizontal Display Period     //**
+  #define  HT   1000//Horizontal Total
+  #define  HPS  51//LLINE Pulse Start Position
+  #define  LPS  3 //  Horizontal Display Period Start Position
+  #define  HPW  8 //  LLINE Pulse Width
+
+  #define  VDP  479//Vertical Display Period
+  #define  VT   530//Vertical Total
+  #define  VPS  24//  LFRAME Pulse Start Position
+  #define  FPS  23//Vertical Display Period Start Positio
+  #define  VPW  3 // LFRAME Pulse Width     //**
+
+  #define MAX_HZ_POSX HDP+1
+  #define MAX_HZ_POSY VDP+1
+
+  extern uint8_t gcode_preview_over, flash_preview_begin, default_preview_flg;
+
+  void SysTick_Callback() {
+    lv_tick_inc(1);
+    print_time_count();
+  }
+
+  void tft_set_cursor(uint16_t x, uint16_t y) {
+    #if 0
+    if (DeviceCode == 0x8989) {
+      LCD_WriteReg(0x004E, y);        //行
+      LCD_WriteReg(0x004F, x);  //列
+    }
+    else if ((DeviceCode == 0x9919)) {
+      LCD_WriteReg(0x004E, x); // 行
+      LCD_WriteReg(0x004F, y); // 列
+    }
+    else if ((DeviceCode == 0x5761)) {    //SSD1963
+      LCD_WrtReg(0x002A);
+      LCD_WrtRAM(x >> 8);
+      LCD_WrtRAM(x & 0x00FF);
+      LCD_WrtRAM(HDP >> 8);
+      LCD_WrtRAM(HDP & 0x00FF);
+      LCD_WrtReg(0x002B);
+      LCD_WrtRAM(y >> 8);
+      LCD_WrtRAM(y & 0x00FF);
+      LCD_WrtRAM(VDP >> 8);
+      LCD_WrtRAM(VDP & 0x00FF);
+    }
+    else if (DeviceCode == 0x9488) {
+      ILI9488_WriteCmd(0x002A);
+      ILI9488_WriteData(x >> 8);
+      ILI9488_WriteData(x & 0x00FF);
+      ILI9488_WriteData(x >> 8);
+      ILI9488_WriteData(x & 0x00FF);
+      //ILI9488_WriteData(0x01);
+      //ILI9488_WriteData(0xDF);
+      ILI9488_WriteCmd(0x002B);
+      ILI9488_WriteData(y >> 8);
+      ILI9488_WriteData(y & 0x00FF);
+      ILI9488_WriteData(y >> 8);
+      ILI9488_WriteData(y & 0x00FF);
+      //ILI9488_WriteData(0x01);
+      //ILI9488_WriteData(0x3F);
+    }
+    else {
+      LCD_WriteReg(0x0020, y); // 行
+      LCD_WriteReg(0x0021, 0x13f - x); // 列
+    }
+    #else // if 0
+      LCD_IO_WriteReg(0x002A);
+      LCD_IO_WriteData(x >> 8);
+      LCD_IO_WriteData(x & 0x00FF);
+      LCD_IO_WriteData(x >> 8);
+      LCD_IO_WriteData(x & 0x00FF);
+      //ILI9488_WriteData(0x01);
+      //ILI9488_WriteData(0xDF);
+      LCD_IO_WriteReg(0x002B);
+      LCD_IO_WriteData(y >> 8);
+      LCD_IO_WriteData(y & 0x00FF);
+      LCD_IO_WriteData(y >> 8);
+      LCD_IO_WriteData(y & 0x00FF);
+      //ILI9488_WriteData(0x01);
+      //ILI9488_WriteData(0x3F);
+    #endif // if 0
+  }
+
+  void LCD_WriteRAM_Prepare(void) {
+    #if 0
+    if ((DeviceCode == 0x9325) || (DeviceCode == 0x9328) || (DeviceCode == 0x8989)) {
+      ClrCs
+      LCD->LCD_REG = R34;
+      SetCs
+    }
+    else {
+      LCD_WrtReg(0x002C);
+    }
+    #else
+      LCD_IO_WriteReg(0x002C);
+    #endif
+  }
+
+  void tft_set_point(uint16_t x, uint16_t y, uint16_t point) {
+    //if (DeviceCode == 0x9488) {
+    if ((x > 480) || (y > 320)) return;
+    //}
+    //**if ( (x>320)||(y>240) ) return;
+    tft_set_cursor(x, y); /*设置光标位置*/
+
+    LCD_WriteRAM_Prepare();   /* 开始写入GRAM*/
+    //LCD_WriteRAM(point);
+    LCD_IO_WriteData(point);
+  }
+
+  void LCD_WriteReg(uint16_t LCD_Reg, uint16_t LCD_RegValue) {
+    /* Write 16-bit Index, then Write Reg */
+    ClrCs
+      LCD_IO_WriteReg(LCD_Reg);
+    /* Write 16-bit Reg */
+    LCD_IO_WriteData(LCD_RegValue);
+    SetCs
+  }
+
+  void ili9320_SetWindows(uint16_t StartX, uint16_t StartY, uint16_t width, uint16_t heigh) {
+    uint16_t s_h, s_l, e_h, e_l;
+
+    uint16_t xEnd, yEnd;
+    xEnd = StartX + width;
+    yEnd = StartY + heigh - 1;
+    if (DeviceCode == 0x8989) {
+      /*LCD_WriteReg(0x0044, (StartX & 0xFF) | (xEnd << 8));
+      LCD_WriteReg(0x0045, StartY);
+      LCD_WriteReg(0x0046, yEnd);*/
+      LCD_WriteReg(0x0044, (StartY & 0xFF) | (yEnd << 8));
+      LCD_WriteReg(0x0045, StartX);
+      LCD_WriteReg(0x0046, xEnd);
+    }
+    else if (DeviceCode == 0x9488) {
+      s_h = (StartX >> 8) & 0x00ff;
+      s_l = StartX & 0x00ff;
+      e_h = ((StartX + width - 1) >> 8) & 0x00ff;
+      e_l = (StartX + width - 1) & 0x00ff;
+
+      LCD_IO_WriteReg(0x002A);
+      LCD_IO_WriteData(s_h);
+      LCD_IO_WriteData(s_l);
+      LCD_IO_WriteData(e_h);
+      LCD_IO_WriteData(e_l);
+
+      s_h = (StartY >> 8) & 0x00ff;
+      s_l = StartY & 0x00ff;
+      e_h = ((StartY + heigh - 1) >> 8) & 0x00ff;
+      e_l = (StartY + heigh - 1) & 0x00ff;
+
+      LCD_IO_WriteReg(0x002B);
+      LCD_IO_WriteData(s_h);
+      LCD_IO_WriteData(s_l);
+      LCD_IO_WriteData(e_h);
+      LCD_IO_WriteData(e_l);
+    }
+    else if ((DeviceCode == 0x9325) || (DeviceCode == 0x9328) || (DeviceCode == 0x1505)) {
+      /* LCD_WriteReg(0x0050, StartX);
+       LCD_WriteReg(0x0052, StartY);
+       LCD_WriteReg(0x0051, xEnd);
+       LCD_WriteReg(0x0053, yEnd);*/
+      LCD_WriteReg(0x0050, StartY);      //Specify the start/end positions of the window address in the horizontal direction by an address unit
+      LCD_WriteReg(0x0051, yEnd);      //Specify the start positions of the window address in the vertical direction by an address unit
+      LCD_WriteReg(0x0052, 320 - xEnd);
+      LCD_WriteReg(0x0053, 320 - StartX - 1);      //Specify the end positions of the window address in the vertical direction by an address unit
+
+    }
+    else {
+      s_h = (StartX >> 8) & 0xFF;
+      s_l = StartX & 0xFF;
+      e_h = ((StartX + width - 1) >> 8) & 0xFF;
+      e_l = (StartX + width - 1) & 0xFF;
+
+      LCD_IO_WriteReg(0x2A);
+      LCD_IO_WriteData(s_h);
+      LCD_IO_WriteData(s_l);
+      LCD_IO_WriteData(e_h);
+      LCD_IO_WriteData(e_l);
+
+      s_h = (StartY >> 8) & 0xFF;
+      s_l = StartY & 0xFF;
+      e_h = ((StartY + heigh - 1) >> 8) & 0xFF;
+      e_l = (StartY + heigh - 1) & 0xFF;
+
+      LCD_IO_WriteReg(0x2B);
+      LCD_IO_WriteData(s_h);
+      LCD_IO_WriteData(s_l);
+      LCD_IO_WriteData(e_h);
+      LCD_IO_WriteData(e_l);
+    }
+  }
+
+  void LCD_Clear(uint16_t Color) {
+    uint32_t index = 0;
+    unsigned int count;
+
+    if (DeviceCode == 0x9488) {
+      tft_set_cursor(0, 0);
+      ili9320_SetWindows(0, 0, 480, 320);
+      LCD_WriteRAM_Prepare();
+      //index = (160*480);
+      for (index = 0; index < 320 * 480; index++)
+        LCD_IO_WriteData(Color);
+      //LCD_IO_WriteMultiple(Color, (480*320));
+      //while(index --) LCD_IO_WriteData(Color);
+    }
+    else if (DeviceCode == 0x5761) {
+      LCD_IO_WriteReg(0x002a);
+      LCD_IO_WriteData(0);
+      LCD_IO_WriteData(0);
+      LCD_IO_WriteData(HDP >> 8);
+      LCD_IO_WriteData(HDP & 0x00ff);
+      LCD_IO_WriteReg(0x002b);
+      LCD_IO_WriteData(0);
+      LCD_IO_WriteData(0);
+      LCD_IO_WriteData(VDP >> 8);
+      LCD_IO_WriteData(VDP & 0x00ff);
+      LCD_IO_WriteReg(0x002c);
+      LCD_IO_WriteReg(0x002c);
+      for (count = 0; count < (HDP + 1) * (VDP + 1); count++)
+        LCD_IO_WriteData(Color);
+    }
+    else {
+      tft_set_cursor(0, 0);
+      LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
+      for (index = 0; index < 76800; index++)
+        LCD_IO_WriteData(Color);
+    }
+  }
+
+  extern uint16_t ILI9488_ReadRAM();
+
+  #if DISABLED(SPI_GRAPHICAL_TFT)
+
+  void init_tft() {
+    uint16_t i;
+    //************* Start Initial Sequence **********//
+
+    LCD_IO_Init(FSMC_CS_PIN, FSMC_RS_PIN);
+
+    _delay_ms(5);
+
+    LCD_IO_WriteReg(0x00D3);
+    DeviceCode = ILI9488_ReadRAM(); //dummy read
+    DeviceCode = ILI9488_ReadRAM();
+    DeviceCode = ILI9488_ReadRAM();
+    DeviceCode <<= 8;
+    DeviceCode |= ILI9488_ReadRAM();
+
+    if (DeviceCode == 0x9488) {
+      LCD_IO_WriteReg(0x00E0);
+      LCD_IO_WriteData(0x0000);
+      LCD_IO_WriteData(0x0007);
+      LCD_IO_WriteData(0x000f);
+      LCD_IO_WriteData(0x000D);
+      LCD_IO_WriteData(0x001B);
+      LCD_IO_WriteData(0x000A);
+      LCD_IO_WriteData(0x003c);
+      LCD_IO_WriteData(0x0078);
+      LCD_IO_WriteData(0x004A);
+      LCD_IO_WriteData(0x0007);
+      LCD_IO_WriteData(0x000E);
+      LCD_IO_WriteData(0x0009);
+      LCD_IO_WriteData(0x001B);
+      LCD_IO_WriteData(0x001e);
+      LCD_IO_WriteData(0x000f);
+
+      LCD_IO_WriteReg(0x00E1);
+      LCD_IO_WriteData(0x0000);
+      LCD_IO_WriteData(0x0022);
+      LCD_IO_WriteData(0x0024);
+      LCD_IO_WriteData(0x0006);
+      LCD_IO_WriteData(0x0012);
+      LCD_IO_WriteData(0x0007);
+      LCD_IO_WriteData(0x0036);
+      LCD_IO_WriteData(0x0047);
+      LCD_IO_WriteData(0x0047);
+      LCD_IO_WriteData(0x0006);
+      LCD_IO_WriteData(0x000a);
+      LCD_IO_WriteData(0x0007);
+      LCD_IO_WriteData(0x0030);
+      LCD_IO_WriteData(0x0037);
+      LCD_IO_WriteData(0x000f);
+
+      LCD_IO_WriteReg(0x00C0);
+      LCD_IO_WriteData(0x0010);
+      LCD_IO_WriteData(0x0010);
+
+      LCD_IO_WriteReg(0x00C1);
+      LCD_IO_WriteData(0x0041);
+
+      LCD_IO_WriteReg(0x00C5);
+      LCD_IO_WriteData(0x0000);
+      LCD_IO_WriteData(0x0022);
+      LCD_IO_WriteData(0x0080);
+
+      LCD_IO_WriteReg(0x0036);
+      //ILI9488_WriteData(0x0068);
+      //if (gCfgItems.overturn_180 != 0xEE)
+      //{
+      LCD_IO_WriteData(0x0068);
+      //}
+      //else
+      //{
+      //ILI9488_WriteData(0x00A8);
+      //}
+
+      LCD_IO_WriteReg(0x003A); //Interface Mode Control
+      LCD_IO_WriteData(0x0055);
+
+      LCD_IO_WriteReg(0x00B0);  //Interface Mode Control
+      LCD_IO_WriteData(0x0000);
+      LCD_IO_WriteReg(0x00B1);   //Frame rate 70HZ
+      LCD_IO_WriteData(0x00B0);
+      LCD_IO_WriteData(0x0011);
+      LCD_IO_WriteReg(0x00B4);
+      LCD_IO_WriteData(0x0002);
+      LCD_IO_WriteReg(0x00B6); //RGB/MCU Interface Control
+      LCD_IO_WriteData(0x0002);
+      LCD_IO_WriteData(0x0042);
+
+      LCD_IO_WriteReg(0x00B7);
+      LCD_IO_WriteData(0x00C6);
+
+      //WriteComm(0xBE);
+      //WriteData(0x00);
+      //WriteData(0x04);
+
+      LCD_IO_WriteReg(0x00E9);
+      LCD_IO_WriteData(0x0000);
+
+      LCD_IO_WriteReg(0x00F7);
+      LCD_IO_WriteData(0x00A9);
+      LCD_IO_WriteData(0x0051);
+      LCD_IO_WriteData(0x002C);
+      LCD_IO_WriteData(0x0082);
+
+      LCD_IO_WriteReg(0x0011);
+      for (i = 0; i < 65535; i++);
+      LCD_IO_WriteReg(0x0029);
+
+      ili9320_SetWindows(0, 0, 480, 320);
+      LCD_Clear(0x0000);
+
+      OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH);
+    }
+  }
+
+  #endif // if DISABLED(SPI_GRAPHICAL_TFT)
+
+  extern uint8_t bmp_public_buf[17 * 1024];
+  void tft_lvgl_init() {
+    //uint16_t test_id=0;
+    W25QXX.init(SPI_QUARTER_SPEED);
+    //test_id=W25QXX.W25QXX_ReadID();
+    #if ENABLED(SDSUPPORT)
+      UpdatePic();
+      UpdateFont();
+    #endif
+
+    gCfgItems_init();
+    ui_cfg_init();
+    disp_language_init();
+    //spi_flash_read_test();
+
+    #if ENABLED(SPI_GRAPHICAL_TFT)
+      SPI_TFT.spi_init(SPI_FULL_SPEED);
+      SPI_TFT.LCD_init();
+    #else
+      init_tft();
+    #endif
+
+    lv_init();
+
+    lv_disp_buf_init(&disp_buf, bmp_public_buf, NULL, LV_HOR_RES_MAX * 18); /*Initialize the display buffer*/
+
+    lv_disp_drv_t disp_drv;     /*Descriptor of a display driver*/
+    lv_disp_drv_init(&disp_drv);    /*Basic initialization*/
+    disp_drv.flush_cb = my_disp_flush; /*Set your driver function*/
+    disp_drv.buffer = &disp_buf;    /*Assign the buffer to the display*/
+    lv_disp_drv_register(&disp_drv);  /*Finally register the driver*/
+
+    lv_indev_drv_t indev_drv;
+    lv_indev_drv_init(&indev_drv);     /*Descriptor of a input device driver*/
+    indev_drv.type = LV_INDEV_TYPE_POINTER; /*Touch pad is a pointer-like device*/
+    indev_drv.read_cb = my_touchpad_read;  /*Set your driver function*/
+    lv_indev_drv_register(&indev_drv);   /*Finally register the driver*/
+
+    systick_attach_callback(SysTick_Callback);
+
+    init_gb2312_font();
+
+    tft_style_init();
+
+    filament_pin_setup();
+
+    #if ENABLED(POWER_LOSS_RECOVERY)
+    if (recovery.valid()) {
+      if (gCfgItems.from_flash_pic == 1)
+        flash_preview_begin = 1;
+      else
+        default_preview_flg = 1;
+
+      uiCfg.print_state = REPRINTING;
+
+      memset(public_buf_m, 0, sizeof(public_buf_m));
+      strncpy(public_buf_m, recovery.info.sd_filename, sizeof(public_buf_m));
+      card.printLongPath(public_buf_m);
+
+      strncpy(list_file.long_name[sel_id], card.longFilename, sizeof(list_file.long_name[sel_id]));
+
+      lv_draw_printing();
+    }
+    else
+    #endif
+    lv_draw_ready_print();
+
+    #if ENABLED(MKS_TEST)
+      Test_GPIO();
+    #endif
+  }
+
+  #if 0
+  void LCD_WriteRAM(uint16_t RGB_Code) {
+    #if 0
+      ClrCs
+      /* Write 16-bit GRAM Reg */
+      LCD->LCD_RAM = RGB_Code;
+      SetCs
+    #else
+      LCD_IO_WriteData(RGB_Code);
+    #endif
+  }
+  #endif
+
+  void my_disp_flush(lv_disp_drv_t * disp, const lv_area_t * area, lv_color_t * color_p) {
+    #if ENABLED(SPI_GRAPHICAL_TFT)
+      uint16_t i, width, height;
+      uint16_t clr_temp;
+      uint8_t tbuf[480 * 2];
+
+      SPI_TFT.spi_init(SPI_FULL_SPEED);
+
+      width = area->x2 - area->x1 + 1;
+      height = area->y2 - area->y1 + 1;
+
+      for (int j = 0; j < height; j++) {
+        SPI_TFT.SetCursor(0, 0);
+        SPI_TFT.SetWindows((uint16_t)area->x1, (uint16_t)area->y1 + j, width, 1);
+        SPI_TFT.LCD_WriteRAM_Prepare();
+
+        for (i = 0; i < width * 2;) {
+          clr_temp = (uint16_t)(((uint16_t)color_p->ch.red << 11)
+                                | ((uint16_t)color_p->ch.green << 5)
+                                | ((uint16_t)color_p->ch.blue));
+
+          tbuf[i] = clr_temp >> 8;
+          tbuf[i + 1] = clr_temp;
+          i += 2;
+          color_p++;
+        }
+        SPI_TFT_CS_L;
+        SPI_TFT_DC_H;
+        SPI.dmaSend(tbuf, width * 2, true);
+        SPI_TFT_CS_H;
+      }
+
+      lv_disp_flush_ready(disp);       /* Indicate you are ready with the flushing*/
+
+      W25QXX.init(SPI_QUARTER_SPEED);
+    #else
+      #if 1
+        uint16_t i, width, height;
+        uint16_t clr_temp;
+        #if 0
+          int32_t x, y;
+          for (y = area->y1; y <= area->y2; y++)
+            for (x = area->x1; x <= area->x2; x++) {
+              //set_pixel(x, y, *color_p);  /* Put a pixel to the display.*/
+              clr_temp = (uint16_t)(((uint16_t)color_p->ch.red << 11)
+                                    | ((uint16_t)color_p->ch.green << 5)
+                                    | ((uint16_t)color_p->ch.blue));
+              tft_set_point(x, y, clr_temp);
+              color_p++;
+            }
+
+        #else
+          width = area->x2 - area->x1 + 1;
+          height = area->y2 - area->y1 + 1;
+          //tft_set_cursor((uint16_t)area->x1,(uint16_t)area->y1);
+          ili9320_SetWindows((uint16_t)area->x1, (uint16_t)area->y1, width, height);
+          LCD_WriteRAM_Prepare();
+          for (i = 0; i < width * height; i++) {
+            clr_temp = (uint16_t)(((uint16_t)color_p->ch.red << 11)
+                                  | ((uint16_t)color_p->ch.green << 5)
+                                  | ((uint16_t)color_p->ch.blue));
+            LCD_IO_WriteData(clr_temp);
+            color_p++;
+          }
+        #endif
+
+        lv_disp_flush_ready(disp);       /* Indicate you are ready with the flushing*/
+      #endif
+    #endif // SPI_GRAPHICAL_TFT
+  }
+
+  #define TICK_CYCLE 1
+
+  static int32_t touch_time1 = 0;
+
+  unsigned int  getTickDiff(unsigned int curTick, unsigned int lastTick) {
+    if (lastTick <= curTick)
+      return (curTick - lastTick) * TICK_CYCLE;
+    else
+      return (0xFFFFFFFF - lastTick + curTick) * TICK_CYCLE;
+  }
+
+  #if ENABLED(SPI_GRAPHICAL_TFT)
+
+    #ifndef USE_XPT2046
+      #define USE_XPT2046       1
+      #define XPT2046_XY_SWAP   1
+      #define XPT2046_X_INV     1
+      #define XPT2046_Y_INV     0
+    #endif
+
+    #if USE_XPT2046
+      #define XPT2046_HOR_RES   480
+      #define XPT2046_VER_RES   320
+      #define XPT2046_X_MIN     201
+      #define XPT2046_Y_MIN     164
+      #define XPT2046_X_MAX     3919
+      #define XPT2046_Y_MAX     3776
+      #define XPT2046_AVG       4
+      #define XPT2046_INV       1
+    #endif
+
+  #else
+
+    #ifndef USE_XPT2046
+      #define USE_XPT2046       1
+      #define XPT2046_XY_SWAP   1
+      #define XPT2046_X_INV     0
+      #define XPT2046_Y_INV     1
+    #endif
+
+    #if USE_XPT2046
+      #define XPT2046_HOR_RES   480
+      #define XPT2046_VER_RES   320
+      #define XPT2046_X_MIN     201
+      #define XPT2046_Y_MIN     164
+      #define XPT2046_X_MAX     3919
+      #define XPT2046_Y_MAX     3776
+      #define XPT2046_AVG       4
+      #define XPT2046_INV       0
+    #endif
+
+  #endif
+
+  static void xpt2046_corr(uint16_t *x, uint16_t *y) {
+    #if XPT2046_XY_SWAP
+      int16_t swap_tmp;
+      swap_tmp = *x;
+      *x = *y;
+      *y = swap_tmp;
+    #endif
+    if ((*x) > XPT2046_X_MIN) (*x) -= XPT2046_X_MIN; else (*x) = 0;
+    if ((*y) > XPT2046_Y_MIN) (*y) -= XPT2046_Y_MIN; else (*y) = 0;
+    (*x) = uint32_t(uint32_t(*x) * XPT2046_HOR_RES) / (XPT2046_X_MAX - XPT2046_X_MIN);
+    (*y) = uint32_t(uint32_t(*y) * XPT2046_VER_RES) / (XPT2046_Y_MAX - XPT2046_Y_MIN);
+    #if XPT2046_X_INV
+      (*x) = XPT2046_HOR_RES - (*x);
+    #endif
+    #if XPT2046_Y_INV
+      (*y) = XPT2046_VER_RES - (*y);
+    #endif
+  }
+
+  #define  times  4
+  #define CHX   0x90// 0x90
+  #define CHY   0xD0// 0xD0
+
+  int SPI2_ReadWrite2Bytes(void) {
+    volatile uint16_t ans = 0;
+    uint16_t temp = 0;
+    #if ENABLED(SPI_GRAPHICAL_TFT)
+      temp = SPI_TFT.spi_read_write_byte(0xFF);
+      ans = temp << 8;
+      temp = SPI_TFT.spi_read_write_byte(0xFF);
+      ans |= temp;
+      ans >>= 3;
+    #else
+      temp = W25QXX.spi_flash_read_write_byte(0xFF);
+      ans = temp << 8;
+      temp = W25QXX.spi_flash_read_write_byte(0xFF);
+      ans |= temp;
+      ans >>= 3;
+    #endif
+    return ans & 0x0FFF;
+  }
+
+  uint16_t x_addata[times], y_addata[times];
+  void XPT2046_Rd_Addata(uint16_t *X_Addata, uint16_t *Y_Addata) {
+    uint16_t i, j, k;
+    //int result;
+    //#if ENABLED(TOUCH_BUTTONS)
+
+    #if ENABLED(SPI_GRAPHICAL_TFT)
+      SPI_TFT.spi_init(SPI_QUARTER_SPEED);
+    #endif
+
+    for (i = 0; i < times; i++) {
+      #if ENABLED(SPI_GRAPHICAL_TFT)
+        OUT_WRITE(TOUCH_CS_PIN, LOW);
+        SPI_TFT.spi_read_write_byte(CHX);
+        y_addata[i] = SPI2_ReadWrite2Bytes();
+        WRITE(TOUCH_CS_PIN, HIGH);
+
+        OUT_WRITE(TOUCH_CS_PIN, LOW);
+        SPI_TFT.spi_read_write_byte(CHY);
+        x_addata[i] = SPI2_ReadWrite2Bytes();
+        WRITE(TOUCH_CS_PIN, HIGH);
+      #else // #if ENABLED(TOUCH_BUTTONS)
+        OUT_WRITE(TOUCH_CS_PIN, LOW);
+        W25QXX.spi_flash_read_write_byte(CHX);
+        y_addata[i] = SPI2_ReadWrite2Bytes();
+        WRITE(TOUCH_CS_PIN, HIGH);
+
+        OUT_WRITE(TOUCH_CS_PIN, LOW);
+        W25QXX.spi_flash_read_write_byte(CHY);
+        x_addata[i] = SPI2_ReadWrite2Bytes();
+        WRITE(TOUCH_CS_PIN, HIGH);
+      #endif
+
+    }
+    //#endif
+    //result = x_addata[0];
+    for (i = 0; i < times; i++)
+      for (j = i + 1; j < times; j++)
+        if (x_addata[j] > x_addata[i]) {
+          k = x_addata[j];
+          x_addata[j] = x_addata[i];
+          x_addata[i] = k;
+        }
+    if (x_addata[times / 2 - 1] - x_addata[times / 2] > 50) {
+      *X_Addata = *Y_Addata = 0;
+      return;
+    }
+
+    *X_Addata = (x_addata[times / 2 - 1] + x_addata[times / 2]) / 2;
+
+    //result = y_addata[0];
+    for (i = 0; i < times; i++)
+      for (j = i + 1; j < times; j++)
+        if (y_addata[j] > y_addata[i]) {
+          k = y_addata[j];
+          y_addata[j] = y_addata[i];
+          y_addata[i] = k;
+        }
+
+    if (y_addata[times / 2 - 1] - y_addata[times / 2] > 50) {
+      *X_Addata = *Y_Addata = 0;
+      return;
+    }
+
+    *Y_Addata = (y_addata[times / 2 - 1] + y_addata[times / 2]) / 2;
+  }
+
+  #define ADC_VALID_OFFSET  10
+
+  uint8_t TOUCH_PressValid(uint16_t _usX, uint16_t _usY) {
+    if ((_usX <= ADC_VALID_OFFSET) || (_usY <= ADC_VALID_OFFSET)
+        || (_usX >= 4095 - ADC_VALID_OFFSET) || (_usY >= 4095 - ADC_VALID_OFFSET)
+        ) return 0;
+
+    return 1;
+  }
+
+  static lv_coord_t last_x = 0, last_y = 0;
+  bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data) {
+    #if 1
+      uint32_t tmpTime, diffTime = 0;
+
+      tmpTime = millis();
+      diffTime = getTickDiff(tmpTime, touch_time1);
+      /*Save the state and save the pressed coordinate*/
+      //data->state = TOUCH_PressValid(last_x, last_y) ? LV_INDEV_STATE_PR : LV_INDEV_STATE_REL;
+      //if (data->state == LV_INDEV_STATE_PR)  ADS7843_Rd_Addata((u16 *)&last_x, (u16 *)&last_y);
+      //touchpad_get_xy(&last_x, &last_y);
+      /*Save the pressed coordinates and the state*/
+      if (diffTime > 10) {
+        XPT2046_Rd_Addata((uint16_t *)&last_x, (uint16_t *)&last_y);
+        if (TOUCH_PressValid(last_x, last_y)) {
+
+          data->state = LV_INDEV_STATE_PR;
+
+          /*Set the coordinates (if released use the last pressed coordinates)*/
+
+          xpt2046_corr((uint16_t *)&last_x, (uint16_t *)&last_y);
+          data->point.x = last_x;
+          data->point.y = last_y;
+
+        }
+        else {
+          data->state = LV_INDEV_STATE_REL;
+        }
+        touch_time1 = tmpTime;
+      }
+
+      return false; /*Return `false` because we are not buffering and no more data to read*/
+    #endif
+  }
+
+#endif // TFT_LITTLE_VGL_UI

Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.h

@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * @file tft_lvgl_configuration.h
+ * @date    2020-02-21
+ * */
+
+//#ifdef __cplusplus
+//extern "C" {
+//#endif
+
+#include "lvgl.h"
+
+void tft_lvgl_init();
+void my_disp_flush(lv_disp_drv_t * disp, const lv_area_t * area, lv_color_t * color_p);
+bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data);
+
+void LCD_Clear(uint16_t Color);
+void tft_set_point(uint16_t x, uint16_t y, uint16_t point);
+void ili9320_SetWindows(uint16_t StartX, uint16_t StartY, uint16_t width, uint16_t heigh);
+void LCD_WriteRAM_Prepare(void);
+
+//#ifdef __cplusplus
+//} /* extern "C" */
+//#endif

Marlin/src/lcd/extui/lib/mks_ui/tft_multi_language.h

@@ -0,0 +1,584 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "inc/tft_Language_en.h"
+#include "inc/tft_Language_s_cn.h"
+#include "inc/tft_Language_t_cn.h"
+#include "inc/tft_Language_ru.h"
+#include "inc/tft_Language_fr.h"
+#include "inc/tft_Language_sp.h"
+#include "inc/tft_Language_it.h"
+
+extern void disp_language_init();
+
+#define LANG_SIMPLE_CHINESE    1
+#define LANG_COMPLEX_CHINESE   2
+#define LANG_ENGLISH           3
+#define LANG_JAPAN             4
+#define LANG_GERMAN            5
+#define LANG_FRENCH            6
+#define LANG_RUSSIAN           7
+#define LANG_KOREAN            8
+#define LANG_TURKISH           9
+#define LANG_SPANISH          10
+#define LANG_GREEK            11
+#define LANG_ITALY            12
+#define LANG_PORTUGUESE       13
+
+#define MULTI_LANGUAGE_ENABLE   1
+#define MULTI_LANGUAGE_DISABLE  0
+
+typedef struct common_menu_disp {
+  const char *text_back;
+  const char *dialog_confirm_title;
+  const char *close_machine_tips;
+  const char *unbind_printer_tips;
+  const char *print_special_title;
+  const char *pause_special_title;
+  const char *operate_special_title;
+  const char *next;
+  const char *previous;
+} common_menu_def;
+extern common_menu_def common_menu;
+
+typedef struct main_menu_disp {
+  const char *title;
+  const char *preheat;
+  const char *move;
+  const char *home;
+  const char *print;
+  const char *extrude;
+  const char *leveling;
+  const char *autoleveling;
+  const char *fan;
+  const char *set;
+  const char *tool;
+  const char *more;
+  const char *machine_para;
+} main_menu_def;
+extern main_menu_def main_menu;
+
+typedef struct preheat_menu_disp {
+  const char *adjust_title;
+  const char *title;
+  const char *add;
+  const char *dec;
+  const char *ext1;
+  const char *ext2;
+  const char *hotbed;
+  const char *off;
+  const char *step_1c;
+  const char *step_5c;
+  const char *step_10c;
+  const char *back;
+
+  const char *value_state;
+
+  const char *dialog_tips;
+
+}preheat_menu_def;
+extern preheat_menu_def preheat_menu;
+
+typedef struct move_menu_disp {
+  const char *title;
+  const char *x_add;
+  const char *x_dec;
+  const char *y_add;
+  const char *y_dec;
+  const char *z_add;
+  const char *z_dec;
+  const char *step_001mm;
+  const char *step_005mm;
+  const char *step_01mm;
+  const char *step_1mm;
+  const char *step_10mm;
+  const char *back;
+} move_menu_def;
+extern move_menu_def move_menu;
+
+typedef struct home_menu_disp {
+  const char *title;
+  const char *home_all;
+  const char *home_x;
+  const char *home_y;
+  const char *home_z;
+  const char *stopmove;
+  const char *back;
+} home_menu_def;
+extern home_menu_def home_menu;
+
+typedef struct file_menu_disp {
+  const char *title;
+  const char *page_up;
+  const char *page_down;
+  const char *back;
+
+  const char *file_loading;
+  const char *no_file;
+  const char *no_file_and_check;
+
+}file_menu_def;
+extern file_menu_def file_menu;
+
+typedef struct extrude_menu_disp {
+  const char *title;
+  const char *in;
+  const char *out;
+  const char *ext1;
+  const char *ext2;
+  const char *step_1mm;
+  const char *step_5mm;
+  const char *step_10mm;
+  const char *low;
+  const char *normal;
+  const char *high;
+  const char *back;
+
+  const char *count_value_mm;
+  const char *count_value_cm;
+  const char *count_value_m;
+  const char *temp_value;
+  const char *temper_text;
+} extrude_menu_def;
+extern extrude_menu_def extrude_menu;
+
+typedef struct leveling_menu_disp {
+  const char *title;
+  const char *position1;
+  const char *position2;
+  const char *position3;
+  const char *position4;
+  const char *position5;
+
+  char *back;
+} leveling_menu_def;
+extern leveling_menu_def leveling_menu;
+
+typedef struct set_menu_disp {
+  const char *title;
+  const char *filesys;
+  const char *wifi;
+  const char *about;
+  const char *fan;
+  const char *filament;
+  const char *breakpoint;
+  const char *motoroff;
+  const char *motoroffXY;
+  const char *shutdown;
+  const char *language;
+  const char *machine_para;
+  const char *back;
+} set_menu_def;
+extern set_menu_def set_menu;
+
+typedef struct filesys_menu_disp {
+  const char *title;
+  const char *filesys;
+  const char *sd_sys;
+  const char *usb_sys;
+  const char *back;
+} filesys_menu_def;
+extern filesys_menu_def filesys_menu;
+
+typedef struct more_menu_disp {
+  const char *title;
+  const char *zoffset;
+  const char *back;
+} more_menu_def;
+extern more_menu_def more_menu;
+
+typedef struct wifi_menu_disp {
+  const char *title;
+  const char *ip;
+  const char *wifi;
+  const char *key;
+  const char *state_ap;
+  const char *state_sta;
+  const char *cloud;
+  const char *connected;
+  const char *disconnected;
+  const char *exception;
+  const char *back;
+  const char *reconnect;
+} wifi_menu_def;
+extern wifi_menu_def wifi_menu;
+
+typedef struct cloud_menu_disp {
+  const char *title;
+  const char *unbind;
+  const char *unbinding;
+  const char *unbinded;
+  const char *bind;
+  const char *binding;
+  const char *binded;
+  const char *disable;
+  const char *disconnected;
+  const char *back;
+  const char *unbind_printer_tips;
+} cloud_menu_def;
+extern cloud_menu_def cloud_menu;
+
+typedef struct about_menu_disp {
+  const char *title;
+  const char *type_name;
+  const char *firmware_v;
+  const char *type;
+  const char *version;
+  const char *wifi;
+  const char *type_robin;
+  const char *type_robin_mini;
+  const char *back;
+} about_menu_def;
+extern about_menu_def about_menu;
+
+typedef struct fan_menu_disp {
+  const char *title;
+  const char *add;
+  const char *dec;
+  const char *full;
+  const char *half;
+  const char *off;
+  const char *back;
+
+  const char *state;
+  const char *state_value;
+} fan_menu_def;
+extern fan_menu_def fan_menu;
+
+typedef struct filament_menu_disp {
+  const char *title;
+  const char *in;
+  const char *out;
+  const char *ext1;
+  const char *ext2;
+  const char *back;
+  const char *stat_temp;
+  const char *ready_replace;
+  const char *replacing;
+  const char *loading;
+  const char *unloading;
+  const char *heating;
+  const char *complete_and_back;
+  const char *filament_dialog_load_heat;
+  const char *filament_dialog_unload_heat;
+  const char *filament_dialog_load_heat_confirm;
+  const char *filament_dialog_unload_heat_confirm;
+  const char *filament_dialog_loading;
+  const char *filament_dialog_unloading;
+  const char *filament_dialog_load_completed;
+  const char *filament_dialog_unload_completed;
+  const char *filament_dialog_ok;
+  const char *filament_dialog_back;
+} filament_menu_def;
+extern filament_menu_def filament_menu;
+
+typedef struct language_menu {
+  const char *title;
+  const char *chinese_s;
+  const char *chinese_t;
+  const char *english;
+  const char *russian;
+  const char *japan;
+  const char *italy;
+  const char *german;
+  const char *spanish;
+  const char *korean;
+  const char *french;
+  const char *brazil;
+  const char *portuguese;
+  const char *next;
+  const char *up;
+  const char *back;
+} language_menu_def;
+extern language_menu_def language_menu;
+
+typedef struct printing_menu_disp {
+  const char *title;
+  const char *option;
+  const char *temp1;
+  const char *temp2;
+  const char *bed_temp;
+  const char *fan_speed;
+  const char *pause;
+  const char *resume;
+  const char *stop;
+} printing_menu_def;
+extern printing_menu_def printing_menu;
+
+typedef struct operation_menu_disp {
+  const char *title;
+  const char *pause;
+  const char *stop;
+  const char *temp;
+  const char *fan;
+  const char *filament;
+  const char *extr;
+  const char *speed;
+  const char *move;
+  const char *more;
+  const char *auto_off;
+  const char *manual_off;
+  const char *back;
+  const char *babystep;
+} operation_menu_def;
+extern operation_menu_def operation_menu;
+
+typedef struct pause_menu_disp {
+  const char *title;
+  const char *resume;
+  const char *stop;
+  const char *extrude;
+  const char *move;
+  const char *filament;
+  const char *more;
+} pause_menu_def;
+extern pause_menu_def pause_menu;
+
+typedef struct speed_menu_disp {
+  const char *title;
+  const char *add;
+  const char *dec;
+  const char *extrude;
+  const char *move;
+  const char *step_1percent;
+  const char *step_5percent;
+  const char *step_10percent;
+  const char *back;
+  const char *move_speed;
+  const char *extrude_speed;
+} speed_menu_def;
+extern speed_menu_def speed_menu;
+
+typedef struct printing_more_menu_disp {
+  const char *title;
+  const char *fan;
+  const char *auto_close;
+  const char *manual;
+  const char *temp;
+  const char *speed;
+  const char *back;
+} printing_more_menu_def;
+extern printing_more_menu_def printing_more_menu;
+
+typedef struct dialog_menu_disp {
+  const char *confirm_title;
+
+  const char *error1_repint_no_file;
+  const char *error2_communication_fail;
+  const char *error3_filename_too_long;
+  const char *error4_no_file;
+  const char *error5_check_filesys;
+
+  const char *tip1_print_file;
+  const char *tip2_stop_file;
+} dialog_menu_def;
+extern dialog_menu_def dialog_menu;
+
+typedef struct print_file_dialog_disp {
+  const char *title;
+  const char *confirm;
+  const char *cancle;
+  const char *print_file;
+  const char *cancle_print;
+  const char *retry;
+  const char *stop;
+  const char *no_file_print_tips;
+  const char *print_from_breakpoint;
+  const char *file_name_too_long_error;
+  const char *close_machine_error;
+  const char *filament_no_press;
+  const char *print_finish;
+  const char *print_time;
+  const char *reprint;
+  const char *wifi_enable_tips;
+} print_file_dialog_menu_def;
+extern print_file_dialog_menu_def print_file_dialog_menu;
+
+typedef struct zoffset_menu_disp {
+  const char *title;
+  const char *inc;
+  const char *dec;
+  const char *step001;
+  const char *step01;
+  const char *step1;
+  const char *back;
+} zoffset_menu_def;
+extern zoffset_menu_def zoffset_menu;
+
+typedef struct tool_menu_disp {
+  const char *title;
+  const char *preheat;
+  const char *extrude;
+  const char *move;
+  const char *home;
+  const char *leveling;
+  const char *autoleveling;
+  const char *filament;
+  const char *more;
+  const char *back;
+} tool_menu_def;
+extern tool_menu_def tool_menu;
+
+typedef struct MachinePara_menu_disp {
+  const char *title;
+  const char *MachineSetting;
+  const char *TemperatureSetting;
+  const char *MotorSetting;
+  const char *AdvanceSetting;
+  //const char *back;
+} MachinePara_menu_def;
+extern MachinePara_menu_def MachinePara_menu;
+
+typedef struct MachineSettings_menu_disp {
+  const char *title;
+  const char *Machine;
+  const char *Stroke;
+  const char *HomeDir;
+  const char *EndStopType;
+  const char *filamet;
+  const char *leveling;
+  const char *back;
+} MachineSettings_menu_def;
+extern MachineSettings_menu_def MachineSettings_menu;
+
+typedef struct TemperatureSettings_menu_disp {
+  const char *title;
+  const char *nozzle;
+  const char *hotbed;
+  const char *preheat;
+  const char *back;
+} TemperatureSettings_menu_def;
+extern TemperatureSettings_menu_def TemperatureSettings_menu;
+
+typedef struct pause_msg_disp {
+  const char *pausing;
+  const char *changing;
+  const char *unload;
+  const char *waiting;
+  const char *insert;
+  const char *load;
+  const char *purge;
+  const char *resume;
+  const char *heat;
+  const char *heating;
+  const char *option;
+  const char *purgeMore;
+  const char *continuePrint;
+} pause_msg_def;
+extern pause_msg_def pause_msg_menu;
+
+/*****************************************/
+//********************************************//
+//#if defined(TFT70)
+//
+//#elif defined(TFT35)
+#define TEXT_VALUE                  "%d/%d"
+//#endif
+
+#define TEXT_VALUE_T                  ": %d℃"
+#define TEXT_VALUE_mm                 ": %dmm"
+#define TEXT_VALUE_cm                 ": %dcm"
+#define TEXT_VALUE_m                  ": %dm"
+
+#define TEMP_UNIT_SYBOL               "%d℃"
+#define FLOAT_TEMP_UNIT_SYBOL               "%.1f℃"
+
+#define TEXT_1C             "1℃"
+#define TEXT_5C             "5℃"
+#define TEXT_10C            "10℃"
+
+#define AXIS_X_ADD_TEXT     "X+"
+#define AXIS_X_DEC_TEXT     "X-"
+#define AXIS_Y_ADD_TEXT     "Y+"
+#define AXIS_Y_DEC_TEXT     "Y-"
+#define AXIS_Z_ADD_TEXT     "Z+"
+#define AXIS_Z_DEC_TEXT     "Z-"
+#define TEXT_001MM          "0.01mm"
+#define TEXT_005MM          "0.05mm"
+#define TEXT_01MM           "0.1mm"
+#define TEXT_1MM            "1mm"
+#define TEXT_10MM           "10mm"
+
+#define EXTRUDE_1MM_TEXT    "1mm"
+#define EXTRUDE_5MM_TEXT    "5mm"
+#define EXTRUDE_10MM_TEXT   "10mm"
+
+#define STEP_1PERCENT       "1%"
+#define STEP_5PERCENT       "5%"
+#define STEP_10PERCENT      "10%"
+
+#define LANGUAGE_S_CN       "简体"
+#define LANGUAGE_T_CN       "繁体"
+#define LANGUAGE_EN         "English"
+#define LANGUAGE_JP         "日本語"
+#define LANGUAGE_GE         "Deutsch"
+#define LANGUAGE_FR         "français"
+#define LANGUAGE_IT         "Italia"
+#define LANGUAGE_PR         "português"
+#define LANGUAGE_KR         "Korean"
+#define LANGUAGE_BR         "Brazil"
+#define LANGUAGE_RU         "русский"
+#define LANGUAGE_SP         "español"
+
+#define HOME_X_TEXT         "X"
+#define HOME_Y_TEXT         "Y"
+#define HOME_Z_TEXT         "Z"
+#define HOME_ALL_TEXT       "All"
+//#if defined(MKS_ROBIN_NANO)
+#define ABOUT_TYPE_TEXT     "MKS Robin Pro"
+//#elif defined(MKS_ROBIN_MINI)
+//#define ABOUT_TYPE_TEXT       "MKS Robin Mini"
+//#endif
+#define ABOUT_VERSION_TEXT  "1.0.0"
+//#define ABOUT_WIFI_TEXT   "WiFi:"
+
+#define FAN_OPEN_TEXT       "100%"
+#define FAN_HALF_TEXT       "50%"
+#define FAN_CLOSE_TEXT      "0%"
+//#define FAN_TIPS1_TEXT      "FAN"
+//#define FAN_TIPS2_TEXT      "FAN\nClose"
+
+#define WIFI_TEXT                       "WIFI"
+#define WIFI_IP_TEXT                    "IP: "
+#define WIFI_NAME_TEXT                  "WiFi: "
+#define WIFI_KEY_TEXT                   "Key: "
+#define WIFI_STATE_AP_TEXT              "State: AP"
+#define WIFI_STATE_STA_TEXT             "State: STA"
+#define WIFI_CONNECTED_TEXT             "Connected"
+#define WIFI_DISCONNECTED_TEXT          "Disconnected"
+#define WIFI_EXCEPTION_TEXT             "Exception"
+
+#define FILAMENT_TIPS2_TEXT             "T:"
+
+#define DIALOG_UPLOAD_ING_EN            "Uploading......"
+#define DIALOG_UPLOAD_ERROR_EN          "Upload error"
+#define DIALOG_UPLOAD_FINISH_EN         "Upload finished"
+#define DIALOG_UPLOAD_SIZE_EN           "Size"
+#define DIALOG_UPLOAD_TIME_EN           "Time"
+#define DIALOG_UPLOAD_SPEED_EN          "Speed"
+#define DIALOG_UPDATE_WIFI_FIRMWARE_EN  "Updating wifi model firmware"
+#define DIALOG_UPDATE_WIFI_WEB_EN       "Updating wifi model web data"
+
+#define ZOFFSET_STEP001                 "0.01mm"
+#define ZOFFSET_STEP01                  "0.1mm"
+#define ZOFFSET_STEP1                   "1mm"

Marlin/src/module/thermistor/thermistor_22.h

@@ -1,9 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

Marlin/src/module/thermistor/thermistor_23.h

@@ -1,9 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h

@@ -45,6 +45,7 @@
   //#define FLASH_EEPROM_EMULATION
   #define SDCARD_EEPROM_EMULATION
 #endif
+#define ENABLE_SPI2
 
 //
 // Limit Switches
@@ -106,16 +107,27 @@
 //
 // Misc. Functions
 //
-#define POWER_LOSS_PIN                      PA2   // PW_DET
+//#define POWER_LOSS_PIN                    PA2   // PW_DET
-#define PS_ON_PIN                           PA3   // PW_OFF
+//#define PS_ON_PIN                         PA3   // PW_OFF
 
-#define LED_PIN                             PB2
+//#define SUICIDE_PIN                       PB2   // Enable MKSPWC support ROBIN NANO v1.2 ONLY
+//#define SUICIDE_PIN_INVERTING false
+
+//#define KILL_PIN                          PA2   // Enable MKSPWC support ROBIN NANO v1.2 ONLY
+//#define KILL_PIN_INVERTING true                 // Enable MKSPWC support ROBIN NANO v1.2 ONLY
+
+//#define SERVO0_PIN                        PA8   // Enable BLTOUCH support ROBIN NANO v1.2 ONLY
+
+//#define LED_PIN                           PB2
+
+#define MT_DET_1_PIN                        PA4
+#define MT_DET_PIN_INVERTING false
 
 //
 // SD Card
 //
 #ifndef SDCARD_CONNECTION
-  #define SDCARD_CONNECTION              ONBOARD
+  //#define SDCARD_CONNECTION            ONBOARD
 #endif
 
 #define SDIO_SUPPORT
@@ -131,7 +143,90 @@
  * If the screen stays white, disable 'LCD_RESET_PIN'
  * to let the bootloader init the screen.
  */
-#if ENABLED(FSMC_GRAPHICAL_TFT)
+
+#if ENABLED(SPI_GRAPHICAL_TFT)
+
+  #if HAS_SPI_LCD
+
+    #define BEEPER_PIN                      PC5
+    #define BTN_ENC                         PE13
+    #define LCD_PINS_ENABLE                 PD13
+    #define LCD_PINS_RS                     PC6
+    #define BTN_EN1                         PE8
+    #define BTN_EN2                         PE11
+    #define LCD_BACKLIGHT_PIN               -1
+
+    // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
+    #if ENABLED(MKS_MINI_12864)
+      #define LCD_BACKLIGHT_PIN             -1
+      #define LCD_RESET_PIN                 -1
+      #define DOGLCD_A0                     PD11
+      #define DOGLCD_CS                     PE15
+      #define DOGLCD_SCK                    PA5
+      #define DOGLCD_MOSI                   PA7
+
+      // Required for MKS_MINI_12864 with this board
+      #define MKS_LCD12864B
+      #undef SHOW_BOOTSCREEN
+
+    #else                                         // !MKS_MINI_12864
+
+      #define LCD_PINS_D4                   PE14
+      #if ENABLED(ULTIPANEL)
+        #define LCD_PINS_D5                 PE15
+        #define LCD_PINS_D6                 PD11
+        #define LCD_PINS_D7                 PD10
+      #endif
+
+      #ifndef ST7920_DELAY_1
+        #define ST7920_DELAY_1     DELAY_NS(125)
+      #endif
+      #ifndef ST7920_DELAY_2
+        #define ST7920_DELAY_2     DELAY_NS(125)
+      #endif
+      #ifndef ST7920_DELAY_3
+        #define ST7920_DELAY_3     DELAY_NS(125)
+      #endif
+
+    #endif // !MKS_MINI_12864
+
+  #else
+
+    #define SPI_TFT_CS_PIN                  PD11
+    #define SPI_TFT_SCK_PIN                 PA5
+    #define SPI_TFT_MISO_PIN                PA6
+    #define SPI_TFT_MOSI_PIN                PA7
+    #define SPI_TFT_DC_PIN                  PD10
+    #define SPI_TFT_RST_PIN                 PC6
+
+    #define LCD_BACKLIGHT_PIN               PD13
+
+    #define TOUCH_CS_PIN                    PE14  // SPI1_NSS
+    #define TOUCH_SCK_PIN                   PA5   // SPI1_SCK
+    #define TOUCH_MISO_PIN                  PA6   // SPI1_MISO
+    #define TOUCH_MOSI_PIN                  PA7   // SPI1_MOSI
+
+    #define BTN_EN1                         PE8
+    #define BTN_EN2                         PE11
+    #define BEEPER_PIN                      PC5
+    #define BTN_ENC                         PE13
+
+  #endif // HAS_SPI_LCD
+
+#elif ENABLED(TFT_LITTLE_VGL_UI)
+
+  #define FSMC_CS_PIN                       PD7   // NE4
+  #define FSMC_RS_PIN                       PD11  // A0
+
+  #define TOUCH_CS_PIN                      PA7   // SPI2_NSS
+  #define TOUCH_SCK_PIN                     PB13  // SPI2_SCK
+  #define TOUCH_MISO_PIN                    PB14  // SPI2_MISO
+  #define TOUCH_MOSI_PIN                    PB15  // SPI2_MOSI
+
+  #define LCD_BACKLIGHT_PIN                 PD13
+
+#elif ENABLED(FSMC_GRAPHICAL_TFT)
+
   #define FSMC_CS_PIN                       PD7   // NE4
   #define FSMC_RS_PIN                       PD11  // A0
 
@@ -146,4 +241,13 @@
     #define TOUCH_MISO_PIN                  PB14  // SPI2_MISO
     #define TOUCH_MOSI_PIN                  PB15  // SPI2_MOSI
   #endif
+
+#endif
+
+#define SPI_FLASH
+#if ENABLED(SPI_FLASH)
+  #define W25QXX_CS_PIN                     PB12
+  #define W25QXX_MOSI_PIN                   PB15
+  #define W25QXX_MISO_PIN                   PB14
+  #define W25QXX_SCK_PIN                    PB13
 #endif

buildroot/share/PlatformIO/scripts/mks_robin_nano35.py

@@ -0,0 +1,40 @@
+import os
+Import("env")
+
+# Relocate firmware from 0x08000000 to 0x08007000
+for define in env['CPPDEFINES']:
+    if define[0] == "VECT_TAB_ADDR":
+        env['CPPDEFINES'].remove(define)
+env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000"))
+
+custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/mks_robin_nano.ld")
+for i, flag in enumerate(env["LINKFLAGS"]):
+    if "-Wl,-T" in flag:
+        env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script
+    elif flag == "-T":
+        env["LINKFLAGS"][i + 1] = custom_ld_script
+
+
+# Encrypt ${PROGNAME}.bin and save it as 'Robin_nano35.bin'
+def encrypt(source, target, env):
+    import sys
+
+    key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E]
+
+    firmware = open(target[0].path, "rb")
+    robin = open(target[0].dir.path +'/Robin_nano35.bin', "wb")
+    length = os.path.getsize(target[0].path)
+    position = 0
+    try:
+        while position < length:
+            byte = firmware.read(1)
+            if position >= 320 and position < 31040:
+                byte = chr(ord(byte) ^ key[position & 31])
+                if sys.version_info[0] > 2:
+                    byte = bytes(byte, 'latin1')
+            robin.write(byte)
+            position += 1
+    finally:
+        firmware.close()
+        robin.close()
+env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);

platformio.ini

@@ -550,7 +550,6 @@ extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_nano.py
 build_flags   = ${common_stm32f1.build_flags}
   -DMCU_STM32F103VE -DSS_TIMER=4
 
-
 #
 # MKS Robin (STM32F103ZET6)
 #
@@ -626,6 +625,23 @@ build_flags   = ${common_stm32f1.build_flags}
 lib_ignore    = ${common_stm32f1.lib_ignore}
   LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SoftwareSerialM
 
+#
+# MKS Robin Nano (STM32F103VET6)
+#
+[env:mks_robin_nano35]
+platform      = ststm32
+board         = genericSTM32F103VE
+platform_packages = tool-stm32duino
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4
+build_unflags = -std=gnu++11
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps      = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+  MKS-LittlevGL=https://github.com/makerbase-mks/MKS-LittlevGL/archive/master.zip
+lib_ignore    = Adafruit NeoPixel, SPI
+
 #
 # Malyan M200 v2 (STM32F070RB)
 #