bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Replace 'const float &' with 'const_float_t' (#21505)

Browse Source
This commit is contained in:
Scott Lahteine 2021-04-01 17:59:57 -05:00 committed by GitHub
parent 600ef1e47c
commit 62f37669dc
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
79 changed files with 376 additions and 366 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/AVR/fastio.cpp
View File

@ -241,7 +241,7 @@ uint8_t extDigitalRead(const int8_t pin) {
*
* DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
*/
uint16_t set_pwm_frequency_hz(const float &hz, const float dca, const float dcb, const float dcc) {
uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb, const float dcc) {
float count = 0;
if (hz > 0 && (dca || dcb || dcc)) {
count = float(F_CPU) / hz; // 1x prescaler, TOP for 16MHz base freq.

2
Marlin/src/core/serial.cpp
View File

@ -91,7 +91,7 @@ void print_bin(uint16_t val) {
}
}
void print_xyz(const float &x, const float &y, const float &z, PGM_P const prefix/*=nullptr*/, PGM_P const suffix/*=nullptr*/) {
void print_xyz(const_float_t x, const_float_t y, const_float_t z, PGM_P const prefix/*=nullptr*/, PGM_P const suffix/*=nullptr*/) {
if (prefix) serialprintPGM(prefix);
SERIAL_ECHOPAIR_P(SP_X_STR, x, SP_Y_STR, y, SP_Z_STR, z);
if (suffix) serialprintPGM(suffix); else SERIAL_EOL();

2
Marlin/src/core/serial.h
View File

@ -387,7 +387,7 @@ void serialprint_truefalse(const bool tf);
void serial_spaces(uint8_t count);
void print_bin(const uint16_t val);
void print_xyz(const float &x, const float &y, const float &z, PGM_P const prefix=nullptr, PGM_P const suffix=nullptr);
void print_xyz(const_float_t x, const_float_t y, const_float_t z, PGM_P const prefix=nullptr, PGM_P const suffix=nullptr);
inline void print_xyz(const xyz_pos_t &xyz, PGM_P const prefix=nullptr, PGM_P const suffix=nullptr) {
print_xyz(xyz.x, xyz.y, xyz.z, prefix, suffix);

10
Marlin/src/core/types.h
View File

@ -78,6 +78,16 @@ typedef float feedRate_t;
//
typedef int16_t celsius_t;
//
// On AVR pointers are only 2 bytes so use 'const float &' for 'const float'
//
#ifdef __AVR__
typedef const float & const_float_t;
#else
typedef const float const_float_t;
#endif
typedef const_float_t const_feedRate_t;
// Conversion macros
#define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f)
#define MMS_TO_MMM(MM_S) (float(MM_S) * 60.0f)

2
Marlin/src/feature/babystep.cpp
View File

@ -50,7 +50,7 @@ void Babystep::step_axis(const AxisEnum axis) {
}
}
void Babystep::add_mm(const AxisEnum axis, const float &mm) {
void Babystep::add_mm(const AxisEnum axis, const_float_t mm) {
add_steps(axis, mm * planner.settings.axis_steps_per_mm[axis]);
}

2
Marlin/src/feature/babystep.h
View File

@ -61,7 +61,7 @@ public:
#endif
static void add_steps(const AxisEnum axis, const int16_t distance);
static void add_mm(const AxisEnum axis, const float &mm);
static void add_mm(const AxisEnum axis, const_float_t mm);
static inline bool has_steps() {
return steps[BS_AXIS_IND(X_AXIS)] || steps[BS_AXIS_IND(Y_AXIS)] || steps[BS_AXIS_IND(Z_AXIS)];

2
Marlin/src/feature/backlash.h
View File

@ -35,7 +35,7 @@ public:
static float smoothing_mm;
#endif
static inline void set_correction(const float &v) { correction = _MAX(0, _MIN(1.0, v)) * all_on; }
static inline void set_correction(const_float_t v) { correction = _MAX(0, _MIN(1.0, v)) * all_on; }
static inline float get_correction() { return float(ui8_to_percent(correction)) / 100.0f; }
#else
static constexpr uint8_t correction = (BACKLASH_CORRECTION) * 0xFF;

4
Marlin/src/feature/bedlevel/abl/abl.cpp
View File

@ -213,7 +213,7 @@ void print_bilinear_leveling_grid() {
) * 0.5f;
}
static float bed_level_virt_2cmr(const uint8_t x, const uint8_t y, const float &tx, const float &ty) {
static float bed_level_virt_2cmr(const uint8_t x, const uint8_t y, const_float_t tx, const_float_t ty) {
float row[4], column[4];
LOOP_L_N(i, 4) {
LOOP_L_N(j, 4) {
@ -356,7 +356,7 @@ float bilinear_z_offset(const xy_pos_t &raw) {
* Prepare a bilinear-leveled linear move on Cartesian,
* splitting the move where it crosses grid borders.
*/
void bilinear_line_to_destination(const feedRate_t &scaled_fr_mm_s, uint16_t x_splits, uint16_t y_splits) {
void bilinear_line_to_destination(const_feedRate_t scaled_fr_mm_s, uint16_t x_splits, uint16_t y_splits) {
// Get current and destination cells for this line
xy_int_t c1 { CELL_INDEX(x, current_position.x), CELL_INDEX(y, current_position.y) },
c2 { CELL_INDEX(x, destination.x), CELL_INDEX(y, destination.y) };

2
Marlin/src/feature/bedlevel/abl/abl.h
View File

@ -37,7 +37,7 @@ void refresh_bed_level();
#endif
#if IS_CARTESIAN && DISABLED(SEGMENT_LEVELED_MOVES)
void bilinear_line_to_destination(const feedRate_t &scaled_fr_mm_s, uint16_t x_splits=0xFFFF, uint16_t y_splits=0xFFFF);
void bilinear_line_to_destination(const_feedRate_t scaled_fr_mm_s, uint16_t x_splits=0xFFFF, uint16_t y_splits=0xFFFF);
#endif
#define _GET_MESH_X(I) float(bilinear_start.x + (I) * bilinear_grid_spacing.x)

2
Marlin/src/feature/bedlevel/bedlevel.cpp
View File

@ -98,7 +98,7 @@ TemporaryBedLevelingState::TemporaryBedLevelingState(const bool enable) : saved(
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
void set_z_fade_height(const float &zfh, const bool do_report/*=true*/) {
void set_z_fade_height(const_float_t zfh, const bool do_report/*=true*/) {
if (planner.z_fade_height == zfh) return;

2
Marlin/src/feature/bedlevel/bedlevel.h
View File

@ -38,7 +38,7 @@ void set_bed_leveling_enabled(const bool enable=true);
void reset_bed_level();
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
void set_z_fade_height(const float &zfh, const bool do_report=true);
void set_z_fade_height(const_float_t zfh, const bool do_report=true);
#endif
#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)

2
Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.cpp
View File

@ -61,7 +61,7 @@
* Prepare a mesh-leveled linear move in a Cartesian setup,
* splitting the move where it crosses mesh borders.
*/
void mesh_bed_leveling::line_to_destination(const feedRate_t &scaled_fr_mm_s, uint8_t x_splits, uint8_t y_splits) {
void mesh_bed_leveling::line_to_destination(const_feedRate_t scaled_fr_mm_s, uint8_t x_splits, uint8_t y_splits) {
// Get current and destination cells for this line
xy_int8_t scel = cell_indexes(current_position), ecel = cell_indexes(destination);
NOMORE(scel.x, GRID_MAX_POINTS_X - 2);

22
Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h
View File

@ -56,7 +56,7 @@ public:
return false;
}
static void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; }
static void set_z(const int8_t px, const int8_t py, const_float_t z) { z_values[px][py] = z; }
static inline void zigzag(const int8_t index, int8_t &px, int8_t &py) {
px = index % (GRID_MAX_POINTS_X);
@ -64,39 +64,39 @@ public:
if (py & 1) px = (GRID_MAX_POINTS_X - 1) - px; // Zig zag
}
static void set_zigzag_z(const int8_t index, const float &z) {
static void set_zigzag_z(const int8_t index, const_float_t z) {
int8_t px, py;
zigzag(index, px, py);
set_z(px, py, z);
}
static int8_t cell_index_x(const float &x) {
static int8_t cell_index_x(const_float_t x) {
int8_t cx = (x - (MESH_MIN_X)) * RECIPROCAL(MESH_X_DIST);
return constrain(cx, 0, (GRID_MAX_POINTS_X) - 2);
}
static int8_t cell_index_y(const float &y) {
static int8_t cell_index_y(const_float_t y) {
int8_t cy = (y - (MESH_MIN_Y)) * RECIPROCAL(MESH_Y_DIST);
return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 2);
}
static inline xy_int8_t cell_indexes(const float &x, const float &y) {
static inline xy_int8_t cell_indexes(const_float_t x, const_float_t y) {
return { cell_index_x(x), cell_index_y(y) };
}
static inline xy_int8_t cell_indexes(const xy_pos_t &xy) { return cell_indexes(xy.x, xy.y); }
static int8_t probe_index_x(const float &x) {
static int8_t probe_index_x(const_float_t x) {
int8_t px = (x - (MESH_MIN_X) + 0.5f * (MESH_X_DIST)) * RECIPROCAL(MESH_X_DIST);
return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1;
}
static int8_t probe_index_y(const float &y) {
static int8_t probe_index_y(const_float_t y) {
int8_t py = (y - (MESH_MIN_Y) + 0.5f * (MESH_Y_DIST)) * RECIPROCAL(MESH_Y_DIST);
return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1;
}
static inline xy_int8_t probe_indexes(const float &x, const float &y) {
static inline xy_int8_t probe_indexes(const_float_t x, const_float_t y) {
return { probe_index_x(x), probe_index_y(y) };
}
static inline xy_int8_t probe_indexes(const xy_pos_t &xy) { return probe_indexes(xy.x, xy.y); }
static float calc_z0(const float &a0, const float &a1, const float &z1, const float &a2, const float &z2) {
static float calc_z0(const_float_t a0, const_float_t a1, const_float_t z1, const_float_t a2, const_float_t z2) {
const float delta_z = (z2 - z1) / (a2 - a1),
delta_a = a0 - a1;
return z1 + delta_a * delta_z;
@ -104,7 +104,7 @@ public:
static float get_z(const xy_pos_t &pos
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
, const float &factor=1.0f
, const_float_t factor=1.0f
#endif
) {
#if DISABLED(ENABLE_LEVELING_FADE_HEIGHT)
@ -120,7 +120,7 @@ public:
}
#if IS_CARTESIAN && DISABLED(SEGMENT_LEVELED_MOVES)
static void line_to_destination(const feedRate_t &scaled_fr_mm_s, uint8_t x_splits=0xFF, uint8_t y_splits=0xFF);
static void line_to_destination(const_feedRate_t scaled_fr_mm_s, uint8_t x_splits=0xFF, uint8_t y_splits=0xFF);
#endif
};

4
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View File

@ -102,7 +102,7 @@ void unified_bed_leveling::invalidate() {
set_all_mesh_points_to_value(NAN);
}
void unified_bed_leveling::set_all_mesh_points_to_value(const float value) {
void unified_bed_leveling::set_all_mesh_points_to_value(const_float_t value) {
GRID_LOOP(x, y) {
z_values[x][y] = value;
TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(x, y, value));
@ -115,7 +115,7 @@ void unified_bed_leveling::set_all_mesh_points_to_value(const float value) {
constexpr int16_t Z_STEPS_NAN = INT16_MAX;
void unified_bed_leveling::set_store_from_mesh(const bed_mesh_t &in_values, mesh_store_t &stored_values) {
auto z_to_store = [](const float &z) {
auto z_to_store = [](const_float_t z) {
if (isnan(z)) return Z_STEPS_NAN;
const int32_t z_scaled = TRUNC(z * mesh_store_scaling);
if (z_scaled == Z_STEPS_NAN || !WITHIN(z_scaled, INT16_MIN, INT16_MAX))

44
Marlin/src/feature/bedlevel/ubl/ubl.h
View File

@ -67,17 +67,17 @@ private:
static G29_parameters_t param;
#if IS_NEWPANEL
static void move_z_with_encoder(const float &multiplier);
static void move_z_with_encoder(const_float_t multiplier);
static float measure_point_with_encoder();
static float measure_business_card_thickness();
static void manually_probe_remaining_mesh(const xy_pos_t&, const float&, const float&, const bool) _O0;
static void manually_probe_remaining_mesh(const xy_pos_t&, const_float_t , const_float_t , const bool) _O0;
static void fine_tune_mesh(const xy_pos_t &pos, const bool do_ubl_mesh_map) _O0;
#endif
static bool G29_parse_parameters() _O0;
static void shift_mesh_height();
static void probe_entire_mesh(const xy_pos_t &near, const bool do_ubl_mesh_map, const bool stow_probe, const bool do_furthest) _O0;
static void tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3);
static void tilt_mesh_based_on_3pts(const_float_t z1, const_float_t z2, const_float_t z3);
static void tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map);
static bool smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir);
static inline bool smart_fill_one(const xy_uint8_t &pos, const xy_uint8_t &dir) {
@ -103,12 +103,12 @@ public:
static mesh_index_pair find_furthest_invalid_mesh_point() _O0;
static void reset();
static void invalidate();
static void set_all_mesh_points_to_value(const float value);
static void adjust_mesh_to_mean(const bool cflag, const float value);
static void set_all_mesh_points_to_value(const_float_t value);
static void adjust_mesh_to_mean(const bool cflag, const_float_t value);
static bool sanity_check();
static void G29() _O0; // O0 for no optimization
static void smart_fill_wlsf(const float &) _O2; // O2 gives smaller code than Os on A2560
static void smart_fill_wlsf(const_float_t ) _O2; // O2 gives smaller code than Os on A2560
static int8_t storage_slot;
@ -131,42 +131,42 @@ public:
unified_bed_leveling();
FORCE_INLINE static void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; }
FORCE_INLINE static void set_z(const int8_t px, const int8_t py, const_float_t z) { z_values[px][py] = z; }
static int8_t cell_index_x_raw(const float &x) {
static int8_t cell_index_x_raw(const_float_t x) {
return FLOOR((x - (MESH_MIN_X)) * RECIPROCAL(MESH_X_DIST));
}
static int8_t cell_index_y_raw(const float &y) {
static int8_t cell_index_y_raw(const_float_t y) {
return FLOOR((y - (MESH_MIN_Y)) * RECIPROCAL(MESH_Y_DIST));
}
static int8_t cell_index_x_valid(const float &x) {
static int8_t cell_index_x_valid(const_float_t x) {
return WITHIN(cell_index_x_raw(x), 0, (GRID_MAX_POINTS_X - 2));
}
static int8_t cell_index_y_valid(const float &y) {
static int8_t cell_index_y_valid(const_float_t y) {
return WITHIN(cell_index_y_raw(y), 0, (GRID_MAX_POINTS_Y - 2));
}
static int8_t cell_index_x(const float &x) {
static int8_t cell_index_x(const_float_t x) {
return constrain(cell_index_x_raw(x), 0, (GRID_MAX_POINTS_X) - 2);
}
static int8_t cell_index_y(const float &y) {
static int8_t cell_index_y(const_float_t y) {
return constrain(cell_index_y_raw(y), 0, (GRID_MAX_POINTS_Y) - 2);
}
static inline xy_int8_t cell_indexes(const float &x, const float &y) {
static inline xy_int8_t cell_indexes(const_float_t x, const_float_t y) {
return { cell_index_x(x), cell_index_y(y) };
}
static inline xy_int8_t cell_indexes(const xy_pos_t &xy) { return cell_indexes(xy.x, xy.y); }
static int8_t closest_x_index(const float &x) {
static int8_t closest_x_index(const_float_t x) {
const int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5) * RECIPROCAL(MESH_X_DIST);
return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1;
}
static int8_t closest_y_index(const float &y) {
static int8_t closest_y_index(const_float_t y) {
const int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * RECIPROCAL(MESH_Y_DIST);
return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1;
}
@ -189,7 +189,7 @@ public:
* It is fairly expensive with its 4 floating point additions and 2 floating point
* multiplications.
*/
FORCE_INLINE static float calc_z0(const float &a0, const float &a1, const float &z1, const float &a2, const float &z2) {
FORCE_INLINE static float calc_z0(const_float_t a0, const_float_t a1, const_float_t z1, const_float_t a2, const_float_t z2) {
return z1 + (z2 - z1) * (a0 - a1) / (a2 - a1);
}
@ -203,7 +203,7 @@ public:
* z_correction_for_x_on_horizontal_mesh_line is an optimization for
* the case where the printer is making a vertical line that only crosses horizontal mesh lines.
*/
static inline float z_correction_for_x_on_horizontal_mesh_line(const float &rx0, const int x1_i, const int yi) {
static inline float z_correction_for_x_on_horizontal_mesh_line(const_float_t rx0, const int x1_i, const int yi) {
if (!WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(yi, 0, GRID_MAX_POINTS_Y - 1)) {
if (DEBUGGING(LEVELING)) {
@ -226,7 +226,7 @@ public:
//
// See comments above for z_correction_for_x_on_horizontal_mesh_line
//
static inline float z_correction_for_y_on_vertical_mesh_line(const float &ry0, const int xi, const int y1_i) {
static inline float z_correction_for_y_on_vertical_mesh_line(const_float_t ry0, const int xi, const int y1_i) {
if (!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(y1_i, 0, GRID_MAX_POINTS_Y - 1)) {
if (DEBUGGING(LEVELING)) {
@ -252,7 +252,7 @@ public:
* Z-Height at both ends. Then it does a linear interpolation of these heights based
* on the Y position within the cell.
*/
static float get_z_correction(const float &rx0, const float &ry0) {
static float get_z_correction(const_float_t rx0, const_float_t ry0) {
const int8_t cx = cell_index_x(rx0), cy = cell_index_y(ry0); // return values are clamped
/**
@ -309,9 +309,9 @@ public:
}
#if UBL_SEGMENTED
static bool line_to_destination_segmented(const feedRate_t &scaled_fr_mm_s);
static bool line_to_destination_segmented(const_feedRate_t scaled_fr_mm_s);
#else
static void line_to_destination_cartesian(const feedRate_t &scaled_fr_mm_s, const uint8_t e);
static void line_to_destination_cartesian(const_feedRate_t scaled_fr_mm_s, const uint8_t e);
#endif
static inline bool mesh_is_valid() {

12
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -672,7 +672,7 @@ void unified_bed_leveling::G29() {
* G29 P5 C<value> : Adjust Mesh To Mean (and subtract the given offset).
* Find the mean average and shift the mesh to center on that value.
*/
void unified_bed_leveling::adjust_mesh_to_mean(const bool cflag, const float offset) {
void unified_bed_leveling::adjust_mesh_to_mean(const bool cflag, const_float_t offset) {
float sum = 0;
int n = 0;
GRID_LOOP(x, y)
@ -821,7 +821,7 @@ void set_message_with_feedback(PGM_P const msg_P) {
return false;
}
void unified_bed_leveling::move_z_with_encoder(const float &multiplier) {
void unified_bed_leveling::move_z_with_encoder(const_float_t multiplier) {
ui.wait_for_release();
while (!ui.button_pressed()) {
idle();
@ -883,7 +883,7 @@ void set_message_with_feedback(PGM_P const msg_P) {
* Move to INVALID points and
* NOTE: Blocks the G-code queue and captures Marlin UI during use.
*/
void unified_bed_leveling::manually_probe_remaining_mesh(const xy_pos_t &pos, const float &z_clearance, const float &thick, const bool do_ubl_mesh_map) {
void unified_bed_leveling::manually_probe_remaining_mesh(const xy_pos_t &pos, const_float_t z_clearance, const_float_t thick, const bool do_ubl_mesh_map) {
ui.capture();
save_ubl_active_state_and_disable(); // No bed level correction so only raw data is obtained
@ -1633,10 +1633,10 @@ void unified_bed_leveling::smart_fill_mesh() {
*/
#ifdef VALIDATE_MESH_TILT
auto d_from = []{ DEBUG_ECHOPGM("D from "); };
auto normed = [&](const xy_pos_t &pos, const float &zadd) {
auto normed = [&](const xy_pos_t &pos, const_float_t zadd) {
return normal.x * pos.x + normal.y * pos.y + zadd;
};
auto debug_pt = [](PGM_P const pre, const xy_pos_t &pos, const float &zadd) {
auto debug_pt = [](PGM_P const pre, const xy_pos_t &pos, const_float_t zadd) {
d_from(); SERIAL_ECHOPGM_P(pre);
DEBUG_ECHO_F(normed(pos, zadd), 6);
DEBUG_ECHOLNPAIR_F(" Z error = ", zadd - get_z_correction(pos), 6);
@ -1658,7 +1658,7 @@ void unified_bed_leveling::smart_fill_mesh() {
#endif // HAS_BED_PROBE
#if ENABLED(UBL_G29_P31)
void unified_bed_leveling::smart_fill_wlsf(const float &weight_factor) {
void unified_bed_leveling::smart_fill_wlsf(const_float_t weight_factor) {
// For each undefined mesh point, compute a distance-weighted least squares fit
// from all the originally populated mesh points, weighted toward the point

4
Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
View File

@ -37,7 +37,7 @@
#if !UBL_SEGMENTED
void unified_bed_leveling::line_to_destination_cartesian(const feedRate_t &scaled_fr_mm_s, const uint8_t extruder) {
void unified_bed_leveling::line_to_destination_cartesian(const_feedRate_t scaled_fr_mm_s, const uint8_t extruder) {
/**
* Much of the nozzle movement will be within the same cell. So we will do as little computation
* as possible to determine if this is the case. If this move is within the same cell, we will
@ -323,7 +323,7 @@
* Returns true if did NOT move, false if moved (requires current_position update).
*/
bool _O2 unified_bed_leveling::line_to_destination_segmented(const feedRate_t &scaled_fr_mm_s) {
bool _O2 unified_bed_leveling::line_to_destination_segmented(const_feedRate_t scaled_fr_mm_s) {
if (!position_is_reachable(destination)) // fail if moving outside reachable boundary
return true; // did not move, so current_position still accurate

2
Marlin/src/feature/encoder_i2c.h
View File

@ -188,7 +188,7 @@ class I2CPositionEncoder {
FORCE_INLINE void set_ec_method(const byte method) { ecMethod = method; }
FORCE_INLINE float get_ec_threshold() { return ecThreshold; }
FORCE_INLINE void set_ec_threshold(const float newThreshold) { ecThreshold = newThreshold; }
FORCE_INLINE void set_ec_threshold(const_float_t newThreshold) { ecThreshold = newThreshold; }
FORCE_INLINE int get_encoder_ticks_mm() {
switch (type) {

2
Marlin/src/feature/filwidth.h
View File

@ -78,7 +78,7 @@ public:
static inline void update_measured_mm() { measured_mm = raw_to_mm(); }
// Update ring buffer used to delay filament measurements
static inline void advance_e(const float &e_move) {
static inline void advance_e(const_float_t e_move) {
// Increment counters with the E distance
e_count += e_move;

8
Marlin/src/feature/leds/printer_event_leds.cpp
View File

@ -40,7 +40,7 @@ PrinterEventLEDs printerEventLEDs;
uint8_t PrinterEventLEDs::old_intensity = 0;
inline uint8_t pel_intensity(const float &start, const float &current, const float &target) {
inline uint8_t pel_intensity(const_float_t start, const_float_t current, const_float_t target) {
if (uint16_t(start) == uint16_t(target)) return 255;
return (uint8_t)map(constrain(current, start, target), start, target, 0.f, 255.f);
}
@ -58,7 +58,7 @@ PrinterEventLEDs printerEventLEDs;
#if HAS_TEMP_HOTEND
void PrinterEventLEDs::onHotendHeating(const float &start, const float &current, const float &target) {
void PrinterEventLEDs::onHotendHeating(const_float_t start, const_float_t current, const_float_t target) {
const uint8_t blue = pel_intensity(start, current, target);
if (blue != old_intensity) {
old_intensity = blue;
@ -70,7 +70,7 @@ PrinterEventLEDs printerEventLEDs;
#if HAS_HEATED_BED
void PrinterEventLEDs::onBedHeating(const float &start, const float &current, const float &target) {
void PrinterEventLEDs::onBedHeating(const_float_t start, const_float_t current, const_float_t target) {
const uint8_t red = pel_intensity(start, current, target);
if (red != old_intensity) {
old_intensity = red;
@ -82,7 +82,7 @@ PrinterEventLEDs printerEventLEDs;
#if HAS_HEATED_CHAMBER
void PrinterEventLEDs::onChamberHeating(const float &start, const float &current, const float &target) {
void PrinterEventLEDs::onChamberHeating(const_float_t start, const_float_t current, const_float_t target) {
const uint8_t green = pel_intensity(start, current, target);
if (green != old_intensity) {
old_intensity = green;

6
Marlin/src/feature/leds/printer_event_leds.h
View File

@ -47,17 +47,17 @@ private:
public:
#if HAS_TEMP_HOTEND
static inline LEDColor onHotendHeatingStart() { old_intensity = 0; return leds.get_color(); }
static void onHotendHeating(const float &start, const float &current, const float &target);
static void onHotendHeating(const_float_t start, const_float_t current, const_float_t target);
#endif
#if HAS_HEATED_BED
static inline LEDColor onBedHeatingStart() { old_intensity = 127; return leds.get_color(); }
static void onBedHeating(const float &start, const float &current, const float &target);
static void onBedHeating(const_float_t start, const_float_t current, const_float_t target);
#endif
#if HAS_HEATED_CHAMBER
static inline LEDColor onChamberHeatingStart() { old_intensity = 127; return leds.get_color(); }
static void onChamberHeating(const float &start, const float &current, const float &target);
static void onChamberHeating(const_float_t start, const_float_t current, const_float_t target);
#endif
#if HAS_TEMP_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER

2
Marlin/src/feature/max7219.cpp
View File

@ -256,7 +256,7 @@ void Max7219::set(const uint8_t line, const uint8_t bits) {
}
// Draw a float with a decimal point and optional digits
void Max7219::print(const uint8_t start, const float value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) {
void Max7219::print(const uint8_t start, const_float_t value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) {
if (pre_size) print(start, value, pre_size, leadzero, !!post_size);
if (post_size) {
const int16_t after = ABS(value) * (10 ^ post_size);

7
Marlin/src/feature/max7219.h
View File

@ -100,6 +100,13 @@ public:
// Update a single native line on just one unit
static void refresh_unit_line(const uint8_t line);
#if ENABLED(MAX7219_NUMERIC)
// Draw an integer with optional leading zeros and optional decimal point
void print(const uint8_t start, int16_t value, uint8_t size, const bool leadzero=false, bool dec=false);
// Draw a float with a decimal point and optional digits
void print(const uint8_t start, const_float_t value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false);
#endif
// Set a single LED by XY coordinate
static void led_set(const uint8_t x, const uint8_t y, const bool on);
static void led_on(const uint8_t x, const uint8_t y);

2
Marlin/src/feature/mixing.cpp
View File

@ -162,7 +162,7 @@ void Mixer::refresh_collector(const float proportion/*=1.0*/, const uint8_t t/*=
float Mixer::prev_z; // = 0
void Mixer::update_gradient_for_z(const float z) {
void Mixer::update_gradient_for_z(const_float_t z) {
if (z == prev_z) return;
prev_z = z;

4
Marlin/src/feature/mixing.h
View File

@ -180,9 +180,9 @@ class Mixer {
static float prev_z;
// Update the current mix from the gradient for a given Z
static void update_gradient_for_z(const float z);
static void update_gradient_for_z(const_float_t z);
static void update_gradient_for_planner_z();
static inline void gradient_control(const float z) {
static inline void gradient_control(const_float_t z) {
if (gradient.enabled) {
if (z >= gradient.end_z)
T(gradient.end_vtool);

10
Marlin/src/feature/pause.cpp
View File

@ -170,7 +170,7 @@ static bool ensure_safe_temperature(const bool wait=true, const PauseMode mode=P
*
* Returns 'true' if load was completed, 'false' for abort
*/
bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=0*/, const int8_t max_beep_count/*=0*/,
bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load_length/*=0*/, const_float_t purge_length/*=0*/, const int8_t max_beep_count/*=0*/,
const bool show_lcd/*=false*/, const bool pause_for_user/*=false*/,
const PauseMode mode/*=PAUSE_MODE_PAUSE_PRINT*/
DXC_ARGS
@ -298,10 +298,10 @@ inline void disable_active_extruder() {
*
* Returns 'true' if unload was completed, 'false' for abort
*/
bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
bool unload_filament(const_float_t unload_length, const bool show_lcd/*=false*/,
const PauseMode mode/*=PAUSE_MODE_PAUSE_PRINT*/
#if BOTH(FILAMENT_UNLOAD_ALL_EXTRUDERS, MIXING_EXTRUDER)
, const float &mix_multiplier/*=1.0*/
, const_float_t mix_multiplier/*=1.0*/
#endif
) {
DEBUG_SECTION(uf, "unload_filament", true);
@ -367,7 +367,7 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
*/
uint8_t did_pause_print = 0;
bool pause_print(const float &retract, const xyz_pos_t &park_point, const float &unload_length/*=0*/, const bool show_lcd/*=false*/ DXC_ARGS) {
bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const_float_t unload_length/*=0*/, const bool show_lcd/*=false*/ DXC_ARGS) {
DEBUG_SECTION(pp, "pause_print", true);
DEBUG_ECHOLNPAIR("... park.x:", park_point.x, " y:", park_point.y, " z:", park_point.z, " unloadlen:", unload_length, " showlcd:", show_lcd DXC_SAY);
@ -555,7 +555,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
* - Send host action for resume, if configured
* - Resume the current SD print job, if any
*/
void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/, const celsius_t targetTemp/*=0*/ DXC_ARGS) {
void resume_print(const_float_t slow_load_length/*=0*/, const_float_t fast_load_length/*=0*/, const_float_t purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/, const celsius_t targetTemp/*=0*/ DXC_ARGS) {
DEBUG_SECTION(rp, "resume_print", true);
DEBUG_ECHOLNPAIR("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", max_beep_count, " targetTemp:", targetTemp DXC_SAY);

10
Marlin/src/feature/pause.h
View File

@ -85,19 +85,19 @@ extern uint8_t did_pause_print;
#define DXC_SAY
#endif
bool pause_print(const float &retract, const xyz_pos_t &park_point, const float &unload_length=0, const bool show_lcd=false DXC_PARAMS);
bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const_float_t unload_length=0, const bool show_lcd=false DXC_PARAMS);
void wait_for_confirmation(const bool is_reload=false, const int8_t max_beep_count=0 DXC_PARAMS);
void resume_print(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=ADVANCED_PAUSE_PURGE_LENGTH,
void resume_print(const_float_t slow_load_length=0, const_float_t fast_load_length=0, const_float_t extrude_length=ADVANCED_PAUSE_PURGE_LENGTH,
const int8_t max_beep_count=0, const celsius_t targetTemp=0 DXC_PARAMS);
bool load_filament(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0,
bool load_filament(const_float_t slow_load_length=0, const_float_t fast_load_length=0, const_float_t extrude_length=0, const int8_t max_beep_count=0,
const bool show_lcd=false, const bool pause_for_user=false, const PauseMode mode=PAUSE_MODE_PAUSE_PRINT DXC_PARAMS);
bool unload_filament(const float &unload_length, const bool show_lcd=false, const PauseMode mode=PAUSE_MODE_PAUSE_PRINT
bool unload_filament(const_float_t unload_length, const bool show_lcd=false, const PauseMode mode=PAUSE_MODE_PAUSE_PRINT
#if BOTH(FILAMENT_UNLOAD_ALL_EXTRUDERS, MIXING_EXTRUDER)
, const float &mix_multiplier=1.0
, const_float_t mix_multiplier=1.0
#endif
);

2
Marlin/src/feature/powerloss.cpp
View File

@ -240,7 +240,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=0*/
#if ENABLED(BACKUP_POWER_SUPPLY)
void PrintJobRecovery::retract_and_lift(const float &zraise) {
void PrintJobRecovery::retract_and_lift(const_float_t zraise) {
#if POWER_LOSS_RETRACT_LEN || POWER_LOSS_ZRAISE
gcode.set_relative_mode(true); // Use relative coordinates

2
Marlin/src/feature/powerloss.h
View File

@ -199,7 +199,7 @@ class PrintJobRecovery {
static void write();
#if ENABLED(BACKUP_POWER_SUPPLY)
static void retract_and_lift(const float &zraise);
static void retract_and_lift(const_float_t zraise);
#endif
#if PIN_EXISTS(POWER_LOSS)

8
Marlin/src/feature/probe_temp_comp.cpp
View File

@ -88,12 +88,12 @@ void ProbeTempComp::print_offsets() {
}
}
void ProbeTempComp::prepare_new_calibration(const float &init_meas_z) {
void ProbeTempComp::prepare_new_calibration(const_float_t init_meas_z) {
calib_idx = 0;
init_measurement = init_meas_z;
}
void ProbeTempComp::push_back_new_measurement(const TempSensorID tsi, const float &meas_z) {
void ProbeTempComp::push_back_new_measurement(const TempSensorID tsi, const_float_t meas_z) {
switch (tsi) {
case TSI_PROBE:
case TSI_BED:
@ -159,12 +159,12 @@ bool ProbeTempComp::finish_calibration(const TempSensorID tsi) {
return true;
}
void ProbeTempComp::compensate_measurement(const TempSensorID tsi, const float &temp, float &meas_z) {
void ProbeTempComp::compensate_measurement(const TempSensorID tsi, const_float_t temp, float &meas_z) {
if (WITHIN(temp, cali_info[tsi].start_temp, cali_info[tsi].end_temp))
meas_z -= get_offset_for_temperature(tsi, temp);
}
float ProbeTempComp::get_offset_for_temperature(const TempSensorID tsi, const float &temp) {
float ProbeTempComp::get_offset_for_temperature(const TempSensorID tsi, const_float_t temp) {
const uint8_t measurements = cali_info[tsi].measurements;
const float start_temp = cali_info[tsi].start_temp,
res_temp = cali_info[tsi].temp_res;

8
Marlin/src/feature/probe_temp_comp.h
View File

@ -121,10 +121,10 @@ class ProbeTempComp {
}
static bool set_offset(const TempSensorID tsi, const uint8_t idx, const int16_t offset);
static void print_offsets();
static void prepare_new_calibration(const float &init_meas_z);
static void push_back_new_measurement(const TempSensorID tsi, const float &meas_z);
static void prepare_new_calibration(const_float_t init_meas_z);
static void push_back_new_measurement(const TempSensorID tsi, const_float_t meas_z);
static bool finish_calibration(const TempSensorID tsi);
static void compensate_measurement(const TempSensorID tsi, const float &temp, float &meas_z);
static void compensate_measurement(const TempSensorID tsi, const_float_t temp, float &meas_z);
private:
static uint8_t calib_idx;
@ -135,7 +135,7 @@ class ProbeTempComp {
*/
static float init_measurement;
static float get_offset_for_temperature(const TempSensorID tsi, const float &temp);
static float get_offset_for_temperature(const TempSensorID tsi, const_float_t temp);
/**
* Fit a linear function in measured temperature offsets

2
Marlin/src/feature/runout.h
View File

@ -101,7 +101,7 @@ class TFilamentMonitor : public FilamentMonitorBase {
#if HAS_FILAMENT_RUNOUT_DISTANCE
static inline float& runout_distance() { return response.runout_distance_mm; }
static inline void set_runout_distance(const float &mm) { response.runout_distance_mm = mm; }
static inline void set_runout_distance(const_float_t mm) { response.runout_distance_mm = mm; }
#endif
// Handle a block completion. RunoutResponseDelayed uses this to

2
Marlin/src/feature/spindle_laser.h
View File

@ -53,7 +53,7 @@ public:
min_pct = TERN(CUTTER_POWER_RELATIVE, 0, TERN(SPINDLE_FEATURE, round(100.0f * (SPEED_POWER_MIN) / (SPEED_POWER_MAX)), SPEED_POWER_MIN)),
max_pct = TERN(SPINDLE_FEATURE, 100, SPEED_POWER_MAX);
static const inline uint8_t pct_to_ocr(const float pct) { return uint8_t(PCT_TO_PWM(pct)); }
static const inline uint8_t pct_to_ocr(const_float_t pct) { return uint8_t(PCT_TO_PWM(pct)); }
// cpower = configured values (e.g., SPEED_POWER_MAX)

4
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -212,7 +212,7 @@ mesh_index_pair find_closest_circle_to_print(const xy_pos_t &pos) {
return out_point;
}
void move_to(const float &rx, const float &ry, const float &z, const float &e_delta) {
void move_to(const_float_t rx, const_float_t ry, const_float_t z, const_float_t e_delta) {
static float last_z = -999.99;
const xy_pos_t dest = { rx, ry };
@ -239,7 +239,7 @@ void move_to(const float &rx, const float &ry, const float &z, const float &e_de
prepare_internal_move_to_destination(fr_mm_s);
}
FORCE_INLINE void move_to(const xyz_pos_t &where, const float &de) { move_to(where.x, where.y, where.z, de); }
FORCE_INLINE void move_to(const xyz_pos_t &where, const_float_t de) { move_to(where.x, where.y, where.z, de); }
void retract_filament(const xyz_pos_t &where) {
if (!g26_retracted) { // Only retract if we are not already retracted!

2
Marlin/src/gcode/calibrate/G33.cpp
View File

@ -93,7 +93,7 @@ void ac_cleanup(TERN_(HAS_MULTI_HOTEND, const uint8_t old_tool_index)) {
TERN_(HAS_MULTI_HOTEND, tool_change(old_tool_index, true));
}
void print_signed_float(PGM_P const prefix, const float &f) {
void print_signed_float(PGM_P const prefix, const_float_t f) {
SERIAL_ECHOPGM(" ");
SERIAL_ECHOPGM_P(prefix);
SERIAL_CHAR(':');

2
Marlin/src/gcode/calibrate/G34_M422.cpp
View File

@ -312,7 +312,7 @@ void GcodeSuite::G34() {
ui.set_status(msg);
#endif
auto decreasing_accuracy = [](const float &v1, const float &v2){
auto decreasing_accuracy = [](const_float_t v1, const_float_t v2){
if (v1 < v2 * 0.7f) {
SERIAL_ECHOLNPGM("Decreasing Accuracy Detected.");
LCD_MESSAGEPGM(MSG_DECREASING_ACCURACY);

2
Marlin/src/gcode/calibrate/M48.cpp
View File

@ -117,7 +117,7 @@ void GcodeSuite::M48() {
max = -99999.9, // Largest value sampled so far
sample_set[n_samples]; // Storage for sampled values
auto dev_report = [](const bool verbose, const float &mean, const float &sigma, const float &min, const float &max, const bool final=false) {
auto dev_report = [](const bool verbose, const_float_t mean, const_float_t sigma, const_float_t min, const_float_t max, const bool final=false) {
if (verbose) {
SERIAL_ECHOPAIR_F("Mean: ", mean, 6);
if (!final) SERIAL_ECHOPAIR_F(" Sigma: ", sigma, 6);

2
Marlin/src/gcode/feature/camera/M240.cpp
View File

@ -47,7 +47,7 @@
#endif
#ifdef PHOTO_RETRACT_MM
inline void e_move_m240(const float length, const feedRate_t &fr_mm_s) {
inline void e_move_m240(const float length, const_feedRate_t fr_mm_s) {
if (length && thermalManager.hotEnoughToExtrude(active_extruder))
unscaled_e_move(length, fr_mm_s);
}

2
Marlin/src/gcode/feature/mixing/M166.cpp
View File

@ -33,7 +33,7 @@ inline void echo_mix() {
SERIAL_ECHOPAIR(" (", mixer.mix[0], "%|", mixer.mix[1], "%)");
}
inline void echo_zt(const int t, const float &z) {
inline void echo_zt(const int t, const_float_t z) {
mixer.update_mix_from_vtool(t);
SERIAL_ECHOPAIR_P(SP_Z_STR, z, SP_T_STR, t);
echo_mix();

2
Marlin/src/gcode/motion/M290.cpp
View File

@ -39,7 +39,7 @@
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
FORCE_INLINE void mod_probe_offset(const float &offs) {
FORCE_INLINE void mod_probe_offset(const_float_t offs) {
if (TERN1(BABYSTEP_HOTEND_Z_OFFSET, active_extruder == 0)) {
probe.offset.z += offs;
SERIAL_ECHO_MSG(STR_PROBE_OFFSET " " STR_Z, probe.offset.z);

12
Marlin/src/gcode/parser.h
View File

@ -282,8 +282,8 @@ public:
// Units modes: Inches, Fahrenheit, Kelvin
#if ENABLED(INCH_MODE_SUPPORT)
static inline float mm_to_linear_unit(const float mm) { return mm / linear_unit_factor; }
static inline float mm_to_volumetric_unit(const float mm) { return mm / (volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); }
static inline float mm_to_linear_unit(const_float_t mm) { return mm / linear_unit_factor; }
static inline float mm_to_volumetric_unit(const_float_t mm) { return mm / (volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); }
// Init linear units by constructor
GCodeParser() { set_input_linear_units(LINEARUNIT_MM); }
@ -301,16 +301,16 @@ public:
return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor);
}
static inline float linear_value_to_mm(const float v) { return v * linear_unit_factor; }
static inline float linear_value_to_mm(const_float_t v) { return v * linear_unit_factor; }
static inline float axis_value_to_mm(const AxisEnum axis, const float v) { return v * axis_unit_factor(axis); }
static inline float per_axis_value(const AxisEnum axis, const float v) { return v / axis_unit_factor(axis); }
#else
static inline float mm_to_linear_unit(const float mm) { return mm; }
static inline float mm_to_volumetric_unit(const float mm) { return mm; }
static inline float mm_to_linear_unit(const_float_t mm) { return mm; }
static inline float mm_to_volumetric_unit(const_float_t mm) { return mm; }
static inline float linear_value_to_mm(const float v) { return v; }
static inline float linear_value_to_mm(const_float_t v) { return v; }
static inline float axis_value_to_mm(const AxisEnum, const float v) { return v; }
static inline float per_axis_value(const AxisEnum, const float v) { return v; }

2
Marlin/src/lcd/dogm/marlinui_DOGM.cpp
View File

@ -669,7 +669,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
B00001100,B00000000
};
void _lcd_zoffset_overlay_gfx(const float zvalue) {
void _lcd_zoffset_overlay_gfx(const_float_t zvalue) {
// Determine whether the user is raising or lowering the nozzle.
static int8_t dir;
static float old_zvalue;

2
Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp
View File

@ -101,7 +101,7 @@ namespace ExtUI {
#if HAS_MESH
void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
// Called when any mesh points are updated
//SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " z:", zval);
}

2
Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp
View File

@ -93,7 +93,7 @@ namespace ExtUI {
void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
// Called when any mesh points are updated
}
#endif

2
Marlin/src/lcd/extui/dgus_lcd.cpp
View File

@ -111,7 +111,7 @@ namespace ExtUI {
#if HAS_MESH
void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
// Called when any mesh points are updated
}

2
Marlin/src/lcd/extui/example.cpp
View File

@ -97,7 +97,7 @@ namespace ExtUI {
#if HAS_MESH
void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
// Called when any mesh points are updated
}

2
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
View File

@ -140,7 +140,7 @@ namespace ExtUI {
#if HAS_LEVELING && HAS_MESH
void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t x, const int8_t y, const float &val) {
void onMeshUpdate(const int8_t x, const int8_t y, const_float_t val) {
BedMeshScreen::onMeshUpdate(x, y, val);
}

2
Marlin/src/lcd/extui/malyan_lcd.cpp
View File

@ -528,7 +528,7 @@ namespace ExtUI {
#if HAS_MESH
void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {}
#endif

70
Marlin/src/lcd/extui/ui_api.cpp
View File

@ -325,7 +325,7 @@ namespace ExtUI {
return epos;
}
void setAxisPosition_mm(const float &position, const axis_t axis, const feedRate_t feedrate/*=0*/) {
void setAxisPosition_mm(const_float_t position, const axis_t axis, const feedRate_t feedrate/*=0*/) {
// Get motion limit from software endstops, if any
float min, max;
soft_endstop.get_manual_axis_limits((AxisEnum)axis, min, max);
@ -343,7 +343,7 @@ namespace ExtUI {
line_to_current_position(feedrate ?: manual_feedrate_mm_s[axis]);
}
void setAxisPosition_mm(const float &position, const extruder_t extruder, const feedRate_t feedrate/*=0*/) {
void setAxisPosition_mm(const_float_t position, const extruder_t extruder, const feedRate_t feedrate/*=0*/) {
setActiveTool(extruder, true);
current_position.e = position;
@ -455,7 +455,7 @@ namespace ExtUI {
};
}
void setAxisCurrent_mA(const float &mA, const axis_t axis) {
void setAxisCurrent_mA(const_float_t mA, const axis_t axis) {
switch (axis) {
#if AXIS_IS_TMC(X)
case X: stepperX.rms_current(constrain(mA, 400, 1500)); break;
@ -479,7 +479,7 @@ namespace ExtUI {
};
}
void setAxisCurrent_mA(const float &mA, const extruder_t extruder) {
void setAxisCurrent_mA(const_float_t mA, const extruder_t extruder) {
switch (extruder) {
#if AXIS_IS_TMC(E0)
case E0: stepperE0.rms_current(constrain(mA, 400, 1500)); break;
@ -539,7 +539,7 @@ namespace ExtUI {
}
}
void setTMCBumpSensitivity(const float &value, const axis_t axis) {
void setTMCBumpSensitivity(const_float_t value, const axis_t axis) {
switch (axis) {
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
#if X_SENSORLESS
@ -583,12 +583,12 @@ namespace ExtUI {
return planner.settings.axis_steps_per_mm[E_AXIS_N(extruder - E0)];
}
void setAxisSteps_per_mm(const float &value, const axis_t axis) {
void setAxisSteps_per_mm(const_float_t value, const axis_t axis) {
planner.settings.axis_steps_per_mm[axis] = value;
planner.refresh_positioning();
}
void setAxisSteps_per_mm(const float &value, const extruder_t extruder) {
void setAxisSteps_per_mm(const_float_t value, const extruder_t extruder) {
UNUSED_E(extruder);
planner.settings.axis_steps_per_mm[E_AXIS_N(extruder - E0)] = value;
planner.refresh_positioning();
@ -621,11 +621,11 @@ namespace ExtUI {
return planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(extruder - E0)];
}
void setAxisMaxAcceleration_mm_s2(const float &value, const axis_t axis) {
void setAxisMaxAcceleration_mm_s2(const_float_t value, const axis_t axis) {
planner.set_max_acceleration(axis, value);
}
void setAxisMaxAcceleration_mm_s2(const float &value, const extruder_t extruder) {
void setAxisMaxAcceleration_mm_s2(const_float_t value, const extruder_t extruder) {
UNUSED_E(extruder);
planner.set_max_acceleration(E_AXIS_N(extruder - E0), value);
}
@ -638,7 +638,7 @@ namespace ExtUI {
#if HAS_FILAMENT_RUNOUT_DISTANCE
float getFilamentRunoutDistance_mm() { return runout.runout_distance(); }
void setFilamentRunoutDistance_mm(const float &value) { runout.set_runout_distance(constrain(value, 0, 999)); }
void setFilamentRunoutDistance_mm(const_float_t value) { runout.set_runout_distance(constrain(value, 0, 999)); }
#endif
#endif
@ -651,7 +651,7 @@ namespace ExtUI {
#if CASELIGHT_USES_BRIGHTNESS
float getCaseLightBrightness_percent() { return ui8_to_percent(caselight.brightness); }
void setCaseLightBrightness_percent(const float &value) {
void setCaseLightBrightness_percent(const_float_t value) {
caselight.brightness = map(constrain(value, 0, 100), 0, 100, 0, 255);
caselight.update_brightness();
}
@ -663,7 +663,7 @@ namespace ExtUI {
return (extruder < EXTRUDERS) ? planner.extruder_advance_K[extruder - E0] : 0;
}
void setLinearAdvance_mm_mm_s(const float &value, const extruder_t extruder) {
void setLinearAdvance_mm_mm_s(const_float_t value, const extruder_t extruder) {
if (extruder < EXTRUDERS)
planner.extruder_advance_K[extruder - E0] = constrain(value, 0, 10);
}
@ -675,7 +675,7 @@ namespace ExtUI {
return planner.junction_deviation_mm;
}
void setJunctionDeviation_mm(const float &value) {
void setJunctionDeviation_mm(const_float_t value) {
planner.junction_deviation_mm = constrain(value, 0.001, 0.3);
TERN_(LIN_ADVANCE, planner.recalculate_max_e_jerk());
}
@ -683,8 +683,8 @@ namespace ExtUI {
#else
float getAxisMaxJerk_mm_s(const axis_t axis) { return planner.max_jerk[axis]; }
float getAxisMaxJerk_mm_s(const extruder_t) { return planner.max_jerk.e; }
void setAxisMaxJerk_mm_s(const float &value, const axis_t axis) { planner.set_max_jerk((AxisEnum)axis, value); }
void setAxisMaxJerk_mm_s(const float &value, const extruder_t) { planner.set_max_jerk(E_AXIS, value); }
void setAxisMaxJerk_mm_s(const_float_t value, const axis_t axis) { planner.set_max_jerk((AxisEnum)axis, value); }
void setAxisMaxJerk_mm_s(const_float_t value, const extruder_t) { planner.set_max_jerk(E_AXIS, value); }
#endif
#if ENABLED(DUAL_X_CARRIAGE)
@ -709,9 +709,9 @@ namespace ExtUI {
void setFlow_percent(const int16_t flow, const extruder_t extr) { planner.set_flow(extr, flow); }
void setMinFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_feedrate_mm_s = fr; }
void setMinTravelFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_travel_feedrate_mm_s = fr; }
void setPrintingAcceleration_mm_s2(const float &acc) { planner.settings.acceleration = acc; }
void setRetractAcceleration_mm_s2(const float &acc) { planner.settings.retract_acceleration = acc; }
void setTravelAcceleration_mm_s2(const float &acc) { planner.settings.travel_acceleration = acc; }
void setPrintingAcceleration_mm_s2(const_float_t acc) { planner.settings.acceleration = acc; }
void setRetractAcceleration_mm_s2(const_float_t acc) { planner.settings.retract_acceleration = acc; }
void setTravelAcceleration_mm_s2(const_float_t acc) { planner.settings.travel_acceleration = acc; }
#if ENABLED(BABYSTEPPING)
@ -772,7 +772,7 @@ namespace ExtUI {
* Converts a mm displacement to a number of whole number of
* steps that is at least mm long.
*/
int16_t mmToWholeSteps(const float &mm, const axis_t axis) {
int16_t mmToWholeSteps(const_float_t mm, const axis_t axis) {
const float steps = mm / planner.steps_to_mm[axis];
return steps > 0 ? CEIL(steps) : FLOOR(steps);
}
@ -789,7 +789,7 @@ namespace ExtUI {
);
}
void setZOffset_mm(const float &value) {
void setZOffset_mm(const_float_t value) {
#if HAS_BED_PROBE
if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
probe.offset.z = value;
@ -807,7 +807,7 @@ namespace ExtUI {
return hotend_offset[extruder - E0][axis];
}
void setNozzleOffset_mm(const float &value, const axis_t axis, const extruder_t extruder) {
void setNozzleOffset_mm(const_float_t value, const axis_t axis, const extruder_t extruder) {
if (extruder - E0 >= HOTENDS) return;
hotend_offset[extruder - E0][axis] = value;
}
@ -826,20 +826,20 @@ namespace ExtUI {
#if HAS_BED_PROBE
float getProbeOffset_mm(const axis_t axis) { return probe.offset.pos[axis]; }
void setProbeOffset_mm(const float &val, const axis_t axis) { probe.offset.pos[axis] = val; }
void setProbeOffset_mm(const_float_t val, const axis_t axis) { probe.offset.pos[axis] = val; }
#endif
#if ENABLED(BACKLASH_GCODE)
float getAxisBacklash_mm(const axis_t axis) { return backlash.distance_mm[axis]; }
void setAxisBacklash_mm(const float &value, const axis_t axis)
void setAxisBacklash_mm(const_float_t value, const axis_t axis)
{ backlash.distance_mm[axis] = constrain(value,0,5); }
float getBacklashCorrection_percent() { return ui8_to_percent(backlash.correction); }
void setBacklashCorrection_percent(const float &value) { backlash.correction = map(constrain(value, 0, 100), 0, 100, 0, 255); }
void setBacklashCorrection_percent(const_float_t value) { backlash.correction = map(constrain(value, 0, 100), 0, 100, 0, 255); }
#ifdef BACKLASH_SMOOTHING_MM
float getBacklashSmoothing_mm() { return backlash.smoothing_mm; }
void setBacklashSmoothing_mm(const float &value) { backlash.smoothing_mm = constrain(value, 0, 999); }
void setBacklashSmoothing_mm(const_float_t value) { backlash.smoothing_mm = constrain(value, 0, 999); }
#endif
#endif
@ -858,14 +858,14 @@ namespace ExtUI {
bed_mesh_t& getMeshArray() { return Z_VALUES_ARR; }
float getMeshPoint(const xy_uint8_t &pos) { return Z_VALUES(pos.x, pos.y); }
void setMeshPoint(const xy_uint8_t &pos, const float &zoff) {
void setMeshPoint(const xy_uint8_t &pos, const_float_t zoff) {
if (WITHIN(pos.x, 0, GRID_MAX_POINTS_X) && WITHIN(pos.y, 0, GRID_MAX_POINTS_Y)) {
Z_VALUES(pos.x, pos.y) = zoff;
TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate());
}
}
void moveToMeshPoint(const xy_uint8_t &pos, const float &z) {
void moveToMeshPoint(const xy_uint8_t &pos, const_float_t z) {
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
const feedRate_t old_feedrate = feedrate_mm_s;
const float x_target = MESH_MIN_X + pos.x * (MESH_X_DIST),
@ -919,14 +919,14 @@ namespace ExtUI {
float getPIDValues_Ki(const extruder_t tool) { return unscalePID_i(PID_PARAM(Ki, tool)); }
float getPIDValues_Kd(const extruder_t tool) { return unscalePID_d(PID_PARAM(Kd, tool)); }
void setPIDValues(const float &p, const float &i, const float &d, extruder_t tool) {
void setPIDValues(const_float_t p, const_float_t i, const_float_t d, extruder_t tool) {
thermalManager.temp_hotend[tool].pid.Kp = p;
thermalManager.temp_hotend[tool].pid.Ki = scalePID_i(i);
thermalManager.temp_hotend[tool].pid.Kd = scalePID_d(d);
thermalManager.updatePID();
}
void startPIDTune(const float &temp, extruder_t tool) {
void startPIDTune(const_float_t temp, extruder_t tool) {
thermalManager.PID_autotune(temp, (heater_id_t)tool, 8, true);
}
#endif
@ -936,14 +936,14 @@ namespace ExtUI {
float getBedPIDValues_Ki() { return unscalePID_i(thermalManager.temp_bed.pid.Ki); }
float getBedPIDValues_Kd() { return unscalePID_d(thermalManager.temp_bed.pid.Kd); }
void setBedPIDValues(const float &p, const float &i, const float &d) {
void setBedPIDValues(const_float_t p, const_float_t i, const_float_t d) {
thermalManager.temp_bed.pid.Kp = p;
thermalManager.temp_bed.pid.Ki = scalePID_i(i);
thermalManager.temp_bed.pid.Kd = scalePID_d(d);
thermalManager.updatePID();
}
void startBedPIDTune(const float &temp) {
void startBedPIDTune(const_float_t temp) {
thermalManager.PID_autotune(temp, H_BED, 4, true);
}
#endif
@ -963,7 +963,7 @@ namespace ExtUI {
return firmware_name;
}
void setTargetTemp_celsius(const float &inval, const heater_t heater) {
void setTargetTemp_celsius(const_float_t inval, const heater_t heater) {
float value = inval;
#ifdef TOUCH_UI_LCD_TEMP_SCALING
value *= TOUCH_UI_LCD_TEMP_SCALING;
@ -988,7 +988,7 @@ namespace ExtUI {
}
}
void setTargetTemp_celsius(const float &inval, const extruder_t extruder) {
void setTargetTemp_celsius(const_float_t inval, const extruder_t extruder) {
float value = inval;
#ifdef TOUCH_UI_LCD_TEMP_SCALING
value *= TOUCH_UI_LCD_TEMP_SCALING;
@ -1000,7 +1000,7 @@ namespace ExtUI {
#endif
}
void setTargetFan_percent(const float &value, const fan_t fan) {
void setTargetFan_percent(const_float_t value, const fan_t fan) {
#if HAS_FAN
if (fan < FAN_COUNT)
thermalManager.set_fan_speed(fan - FAN0, map(constrain(value, 0, 100), 0, 100, 0, 255));
@ -1010,7 +1010,7 @@ namespace ExtUI {
#endif
}
void setFeedrate_percent(const float &value) { feedrate_percentage = constrain(value, 10, 500); }
void setFeedrate_percent(const_float_t value) { feedrate_percentage = constrain(value, 10, 500); }
void coolDown() {
#if HAS_HOTEND

74
Marlin/src/lcd/extui/ui_api.h
View File

@ -102,11 +102,11 @@ namespace ExtUI {
#if HAS_TRINAMIC_CONFIG
float getAxisCurrent_mA(const axis_t);
float getAxisCurrent_mA(const extruder_t);
void setAxisCurrent_mA(const float&, const axis_t);
void setAxisCurrent_mA(const float&, const extruder_t);
void setAxisCurrent_mA(const_float_t , const axis_t);
void setAxisCurrent_mA(const_float_t , const extruder_t);
int getTMCBumpSensitivity(const axis_t);
void setTMCBumpSensitivity(const float&, const axis_t);
void setTMCBumpSensitivity(const_float_t , const axis_t);
#endif
float getActualTemp_celsius(const heater_t);
@ -161,11 +161,11 @@ namespace ExtUI {
#if HAS_MESH
bed_mesh_t& getMeshArray();
float getMeshPoint(const xy_uint8_t &pos);
void setMeshPoint(const xy_uint8_t &pos, const float &zval);
void moveToMeshPoint(const xy_uint8_t &pos, const float &z);
void setMeshPoint(const xy_uint8_t &pos, const_float_t zval);
void moveToMeshPoint(const xy_uint8_t &pos, const_float_t z);
void onMeshLevelingStart();
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval);
inline void onMeshUpdate(const xy_int8_t &pos, const float &zval) { onMeshUpdate(pos.x, pos.y, zval); }
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval);
inline void onMeshUpdate(const xy_int8_t &pos, const_float_t zval) { onMeshUpdate(pos.x, pos.y, zval); }
typedef enum : uint8_t {
MESH_START, // Prior to start of probe
@ -191,42 +191,42 @@ namespace ExtUI {
char* getFilamentUsed_str(char buffer[21]);
#endif
void setTargetTemp_celsius(const float&, const heater_t);
void setTargetTemp_celsius(const float&, const extruder_t);
void setTargetFan_percent(const float&, const fan_t);
void setTargetTemp_celsius(const_float_t , const heater_t);
void setTargetTemp_celsius(const_float_t , const extruder_t);
void setTargetFan_percent(const_float_t , const fan_t);
void coolDown();
void setAxisPosition_mm(const float&, const axis_t, const feedRate_t=0);
void setAxisPosition_mm(const float&, const extruder_t, const feedRate_t=0);
void setAxisSteps_per_mm(const float&, const axis_t);
void setAxisSteps_per_mm(const float&, const extruder_t);
void setAxisPosition_mm(const_float_t , const axis_t, const feedRate_t=0);
void setAxisPosition_mm(const_float_t , const extruder_t, const feedRate_t=0);
void setAxisSteps_per_mm(const_float_t , const axis_t);
void setAxisSteps_per_mm(const_float_t , const extruder_t);
void setAxisMaxFeedrate_mm_s(const feedRate_t, const axis_t);
void setAxisMaxFeedrate_mm_s(const feedRate_t, const extruder_t);
void setAxisMaxAcceleration_mm_s2(const float&, const axis_t);
void setAxisMaxAcceleration_mm_s2(const float&, const extruder_t);
void setAxisMaxAcceleration_mm_s2(const_float_t , const axis_t);
void setAxisMaxAcceleration_mm_s2(const_float_t , const extruder_t);
void setFeedrate_mm_s(const feedRate_t);
void setMinFeedrate_mm_s(const feedRate_t);
void setMinTravelFeedrate_mm_s(const feedRate_t);
void setPrintingAcceleration_mm_s2(const float&);
void setRetractAcceleration_mm_s2(const float&);
void setTravelAcceleration_mm_s2(const float&);
void setFeedrate_percent(const float&);
void setPrintingAcceleration_mm_s2(const_float_t );
void setRetractAcceleration_mm_s2(const_float_t );
void setTravelAcceleration_mm_s2(const_float_t );
void setFeedrate_percent(const_float_t );
void setFlow_percent(const int16_t, const extruder_t);
bool awaitingUserConfirm();
void setUserConfirmed();
#if ENABLED(LIN_ADVANCE)
float getLinearAdvance_mm_mm_s(const extruder_t);
void setLinearAdvance_mm_mm_s(const float&, const extruder_t);
void setLinearAdvance_mm_mm_s(const_float_t , const extruder_t);
#endif
#if HAS_JUNCTION_DEVIATION
float getJunctionDeviation_mm();
void setJunctionDeviation_mm(const float&);
void setJunctionDeviation_mm(const_float_t );
#else
float getAxisMaxJerk_mm_s(const axis_t);
float getAxisMaxJerk_mm_s(const extruder_t);
void setAxisMaxJerk_mm_s(const float&, const axis_t);
void setAxisMaxJerk_mm_s(const float&, const extruder_t);
void setAxisMaxJerk_mm_s(const_float_t , const axis_t);
void setAxisMaxJerk_mm_s(const_float_t , const extruder_t);
#endif
extruder_t getTool(const uint8_t extruder);
@ -234,7 +234,7 @@ namespace ExtUI {
void setActiveTool(const extruder_t, bool no_move);
#if ENABLED(BABYSTEPPING)
int16_t mmToWholeSteps(const float& mm, const axis_t axis);
int16_t mmToWholeSteps(const_float_t mm, const axis_t axis);
bool babystepAxis_steps(const int16_t steps, const axis_t axis);
void smartAdjustAxis_steps(const int16_t steps, const axis_t axis, bool linked_nozzles);
@ -242,28 +242,28 @@ namespace ExtUI {
#if HAS_HOTEND_OFFSET
float getNozzleOffset_mm(const axis_t, const extruder_t);
void setNozzleOffset_mm(const float&, const axis_t, const extruder_t);
void setNozzleOffset_mm(const_float_t , const axis_t, const extruder_t);
void normalizeNozzleOffset(const axis_t axis);
#endif
float getZOffset_mm();
void setZOffset_mm(const float&);
void setZOffset_mm(const_float_t );
#if HAS_BED_PROBE
float getProbeOffset_mm(const axis_t);
void setProbeOffset_mm(const float&, const axis_t);
void setProbeOffset_mm(const_float_t , const axis_t);
#endif
#if ENABLED(BACKLASH_GCODE)
float getAxisBacklash_mm(const axis_t);
void setAxisBacklash_mm(const float&, const axis_t);
void setAxisBacklash_mm(const_float_t , const axis_t);
float getBacklashCorrection_percent();
void setBacklashCorrection_percent(const float&);
void setBacklashCorrection_percent(const_float_t );
#ifdef BACKLASH_SMOOTHING_MM
float getBacklashSmoothing_mm();
void setBacklashSmoothing_mm(const float&);
void setBacklashSmoothing_mm(const_float_t );
#endif
#endif
@ -275,7 +275,7 @@ namespace ExtUI {
#if HAS_FILAMENT_RUNOUT_DISTANCE
float getFilamentRunoutDistance_mm();
void setFilamentRunoutDistance_mm(const float&);
void setFilamentRunoutDistance_mm(const_float_t );
#endif
#endif
@ -285,7 +285,7 @@ namespace ExtUI {
#if DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
float getCaseLightBrightness_percent();
void setCaseLightBrightness_percent(const float&);
void setCaseLightBrightness_percent(const_float_t );
#endif
#endif
@ -293,16 +293,16 @@ namespace ExtUI {
float getPIDValues_Kp(const extruder_t);
float getPIDValues_Ki(const extruder_t);
float getPIDValues_Kd(const extruder_t);
void setPIDValues(const float&, const float&, const float&, extruder_t);
void startPIDTune(const float&, extruder_t);
void setPIDValues(const_float_t , const_float_t , const_float_t , extruder_t);
void startPIDTune(const_float_t , extruder_t);
#endif
#if ENABLED(PIDTEMPBED)
float getBedPIDValues_Kp();
float getBedPIDValues_Ki();
float getBedPIDValues_Kd();
void setBedPIDValues(const float&, const float&, const float&);
void startBedPIDTune(const float&);
void setBedPIDValues(const_float_t , const_float_t , const_float_t );
void startBedPIDTune(const_float_t );
#endif
/**

2
Marlin/src/lcd/marlinui.h
View File

@ -501,7 +501,7 @@ public:
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
static void ubl_mesh_edit_start(const float &initial);
static void ubl_mesh_edit_start(const_float_t initial);
static float ubl_mesh_value();
#endif

2
Marlin/src/lcd/menu/menu.cpp
View File

@ -289,7 +289,7 @@ void scroll_screen(const uint8_t limit, const bool is_menu) {
#if HAS_LINE_TO_Z
void line_to_z(const float &z) {
void line_to_z(const_float_t z) {
current_position.z = z;
line_to_current_position(manual_feedrate_mm_s.z);
}

8
Marlin/src/lcd/menu/menu.h
View File

@ -40,7 +40,7 @@ typedef void (*selectFunc_t)();
#define SS_DEFAULT SS_CENTER
#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
void _lcd_zoffset_overlay_gfx(const float zvalue);
void _lcd_zoffset_overlay_gfx(const_float_t zvalue);
#endif
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) && Z_PROBE_OFFSET_RANGE_MIN >= -9 && Z_PROBE_OFFSET_RANGE_MAX <= 9
@ -212,11 +212,7 @@ void _lcd_draw_homing();
#define HAS_LINE_TO_Z ANY(DELTA, PROBE_MANUALLY, MESH_BED_LEVELING, LEVEL_BED_CORNERS)
#if HAS_LINE_TO_Z
void line_to_z(const float &z);
#endif
#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
void _lcd_zoffset_overlay_gfx(const float zvalue);
void line_to_z(const_float_t z);
#endif
#if ENABLED(PROBE_OFFSET_WIZARD)

2
Marlin/src/lcd/menu/menu_delta_calibrate.cpp
View File

@ -86,7 +86,7 @@ void _man_probe_pt(const xy_pos_t &xy) {
ui.goto_screen(_lcd_calibrate_homing);
}
void _goto_tower_a(const float &a) {
void _goto_tower_a(const_float_t a) {
xy_pos_t tower_vec = { cos(RADIANS(a)), sin(RADIANS(a)) };
_man_probe_pt(tower_vec * delta_calibration_radius());
}

10
Marlin/src/lcd/menu/menu_item.h
View File

@ -77,8 +77,8 @@ template<typename NAME>
class TMenuEditItem : MenuEditItemBase {
private:
typedef typename NAME::type_t type_t;
static inline float scale(const float value) { return NAME::scale(value); }
static inline float unscale(const float value) { return NAME::unscale(value); }
static inline float scale(const_float_t value) { return NAME::scale(value); }
static inline float unscale(const_float_t value) { return NAME::unscale(value); }
static const char* to_string(const int32_t value) { return NAME::strfunc(unscale(value)); }
static void load(void *ptr, const int32_t value) { *((type_t*)ptr) = unscale(value); }
public:
@ -114,9 +114,9 @@ class TMenuEditItem : MenuEditItemBase {
#define DEFINE_MENU_EDIT_ITEM_TYPE(NAME, TYPE, STRFUNC, SCALE, V...) \
struct MenuEditItemInfo_##NAME { \
typedef TYPE type_t; \
static inline float scale(const float value) { return value * (SCALE) + (V+0); } \
static inline float unscale(const float value) { return value / (SCALE) + (V+0); } \
static inline const char* strfunc(const float value) { return STRFUNC(_DOFIX(TYPE,value)); } \
static inline float scale(const_float_t value) { return value * (SCALE) + (V+0); } \
static inline float unscale(const_float_t value) { return value / (SCALE) + (V+0); } \
static inline const char* strfunc(const_float_t value) { return STRFUNC(_DOFIX(TYPE,value)); } \
}; \
typedef TMenuEditItem<MenuEditItemInfo_##NAME> MenuItem_##NAME

2
Marlin/src/lcd/menu/menu_motion.cpp
View File

@ -149,7 +149,7 @@ void lcd_move_z() { _lcd_move_xyz(GET_TEXT(MSG_MOVE_Z), Z_AXIS); }
screenFunc_t _manual_move_func_ptr;
void _goto_manual_move(const float scale) {
void _goto_manual_move(const_float_t scale) {
ui.defer_status_screen();
ui.manual_move.menu_scale = scale;
ui.goto_screen(_manual_move_func_ptr);

4
Marlin/src/lcd/menu/menu_probe_offset.cpp
View File

@ -58,14 +58,14 @@ inline void z_clearance_move() {
);
}
void set_offset_and_go_back(const float &z) {
void set_offset_and_go_back(const_float_t z) {
probe.offset.z = z;
SET_SOFT_ENDSTOP_LOOSE(false);
TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
ui.goto_previous_screen_no_defer();
}
void _goto_manual_move_z(const float scale) {
void _goto_manual_move_z(const_float_t scale) {
ui.manual_move.menu_scale = scale;
ui.goto_screen(lcd_move_z);
}

2
Marlin/src/lcd/menu/menu_ubl.cpp
View File

@ -92,7 +92,7 @@ void _lcd_mesh_fine_tune(PGM_P const msg) {
// Init mesh editing and go to the fine tuning screen (ubl.fine_tune_mesh)
// To capture encoder events UBL will also call ui.capture and ui.release.
//
void MarlinUI::ubl_mesh_edit_start(const float &initial) {
void MarlinUI::ubl_mesh_edit_start(const_float_t initial) {
TERN_(HAS_GRAPHICAL_TFT, clear_lcd());
mesh_edit_accumulator = initial;
goto_screen([]{ _lcd_mesh_fine_tune(GET_TEXT(MSG_MESH_EDIT_Z)); });

4
Marlin/src/libs/L64XX/L64XX_Marlin.cpp
View File

@ -368,12 +368,12 @@ void L64XX_Marlin::set_param(const L64XX_axis_t axis, const uint8_t param, const
}
}
inline void echo_min_max(const char a, const float &min, const float &max) {
inline void echo_min_max(const char a, const_float_t min, const_float_t max) {
DEBUG_CHAR(' '); DEBUG_CHAR(a);
DEBUG_ECHOPAIR(" min = ", min);
DEBUG_ECHOLNPAIR(" max = ", max);
}
inline void echo_oct_used(const float &oct, const uint8_t stall) {
inline void echo_oct_used(const_float_t oct, const uint8_t stall) {
DEBUG_ECHOPAIR("over_current_threshold used : ", oct);
DEBUG_ECHOPGM_P(stall ? PSTR(" (Stall") : PSTR(" (OCD"));
DEBUG_ECHOLNPGM(" threshold)");

8
Marlin/src/libs/least_squares_fit.h
View File

@ -47,7 +47,7 @@ inline void incremental_LSF_reset(struct linear_fit_data *lsf) {
memset(lsf, 0, sizeof(linear_fit_data));
}
inline void incremental_WLSF(struct linear_fit_data *lsf, const float &x, const float &y, const float &z, const float &w) {
inline void incremental_WLSF(struct linear_fit_data *lsf, const_float_t x, const_float_t y, const_float_t z, const_float_t w) {
// weight each accumulator by factor w, including the "number" of samples
// (analogous to calling inc_LSF twice with same values to weight it by 2X)
const float wx = w * x, wy = w * y, wz = w * z;
@ -63,11 +63,11 @@ inline void incremental_WLSF(struct linear_fit_data *lsf, const float &x, const
lsf->max_absx = _MAX(ABS(wx), lsf->max_absx);
lsf->max_absy = _MAX(ABS(wy), lsf->max_absy);
}
inline void incremental_WLSF(struct linear_fit_data *lsf, const xy_pos_t &pos, const float &z, const float &w) {
inline void incremental_WLSF(struct linear_fit_data *lsf, const xy_pos_t &pos, const_float_t z, const_float_t w) {
incremental_WLSF(lsf, pos.x, pos.y, z, w);
}
inline void incremental_LSF(struct linear_fit_data *lsf, const float &x, const float &y, const float &z) {
inline void incremental_LSF(struct linear_fit_data *lsf, const_float_t x, const_float_t y, const_float_t z) {
lsf->xbar += x;
lsf->ybar += y;
lsf->zbar += z;
@ -80,7 +80,7 @@ inline void incremental_LSF(struct linear_fit_data *lsf, const float &x, const f
lsf->max_absy = _MAX(ABS(y), lsf->max_absy);
lsf->N += 1.0;
}
inline void incremental_LSF(struct linear_fit_data *lsf, const xy_pos_t &pos, const float &z) {
inline void incremental_LSF(struct linear_fit_data *lsf, const xy_pos_t &pos, const_float_t z) {
incremental_LSF(lsf, pos.x, pos.y, z);
}

4
Marlin/src/libs/nozzle.cpp
View File

@ -130,7 +130,7 @@ Nozzle nozzle;
* @param strokes number of strokes to execute
* @param radius radius of circle
*/
void Nozzle::circle(const xyz_pos_t &start, const xyz_pos_t &middle, const uint8_t &strokes, const float &radius) {
void Nozzle::circle(const xyz_pos_t &start, const xyz_pos_t &middle, const uint8_t &strokes, const_float_t radius) {
if (strokes == 0) return;
#if ENABLED(NOZZLE_CLEAN_GOBACK)
@ -158,7 +158,7 @@ Nozzle nozzle;
* @param pattern one of the available patterns
* @param argument depends on the cleaning pattern
*/
void Nozzle::clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects, const uint8_t cleans) {
void Nozzle::clean(const uint8_t &pattern, const uint8_t &strokes, const_float_t radius, const uint8_t &objects, const uint8_t cleans) {
xyz_pos_t start[HOTENDS] = NOZZLE_CLEAN_START_POINT, end[HOTENDS] = NOZZLE_CLEAN_END_POINT, middle[HOTENDS] = NOZZLE_CLEAN_CIRCLE_MIDDLE;
const uint8_t arrPos = ANY(SINGLENOZZLE, MIXING_EXTRUDER) ? 0 : active_extruder;

4
Marlin/src/libs/nozzle.h
View File

@ -62,7 +62,7 @@ class Nozzle {
* @param strokes number of strokes to execute
* @param radius radius of circle
*/
static void circle(const xyz_pos_t &start, const xyz_pos_t &middle, const uint8_t &strokes, const float &radius) _Os;
static void circle(const xyz_pos_t &start, const xyz_pos_t &middle, const uint8_t &strokes, const_float_t radius) _Os;
#endif // NOZZLE_CLEAN_FEATURE
@ -77,7 +77,7 @@ class Nozzle {
* @param pattern one of the available patterns
* @param argument depends on the cleaning pattern
*/
static void clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects, const uint8_t cleans) _Os;
static void clean(const uint8_t &pattern, const uint8_t &strokes, const_float_t radius, const uint8_t &objects, const uint8_t cleans) _Os;
#endif // NOZZLE_CLEAN_FEATURE

38
Marlin/src/libs/numtostr.cpp
View File

@ -178,7 +178,7 @@ const char* i16tostr4signrj(const int16_t i) {
}
// Convert unsigned float to string with 1.1 format
const char* ftostr11ns(const float &f) {
const char* ftostr11ns(const_float_t f) {
const long i = UINTFLOAT(f, 1);
conv[4] = DIGIMOD(i, 10);
conv[5] = '.';
@ -187,7 +187,7 @@ const char* ftostr11ns(const float &f) {
}
// Convert unsigned float to string with 1.23 format
const char* ftostr12ns(const float &f) {
const char* ftostr12ns(const_float_t f) {
const long i = UINTFLOAT(f, 2);
conv[3] = DIGIMOD(i, 100);
conv[4] = '.';
@ -197,7 +197,7 @@ const char* ftostr12ns(const float &f) {
}
// Convert unsigned float to string with 12.3 format
const char* ftostr31ns(const float &f) {
const char* ftostr31ns(const_float_t f) {
const long i = UINTFLOAT(f, 1);
conv[3] = DIGIMOD(i, 100);
conv[4] = DIGIMOD(i, 10);
@ -207,7 +207,7 @@ const char* ftostr31ns(const float &f) {
}
// Convert unsigned float to string with 123.4 format
const char* ftostr41ns(const float &f) {
const char* ftostr41ns(const_float_t f) {
const long i = UINTFLOAT(f, 1);
conv[2] = DIGIMOD(i, 1000);
conv[3] = DIGIMOD(i, 100);
@ -218,7 +218,7 @@ const char* ftostr41ns(const float &f) {
}
// Convert signed float to fixed-length string with 12.34 / _2.34 / -2.34 or -23.45 / 123.45 format
const char* ftostr42_52(const float &f) {
const char* ftostr42_52(const_float_t f) {
if (f <= -10 || f >= 100) return ftostr52(f); // -23.45 / 123.45
long i = INTFLOAT(f, 2);
conv[2] = (f >= 0 && f < 10) ? ' ' : MINUSOR(i, DIGIMOD(i, 1000));
@ -230,7 +230,7 @@ const char* ftostr42_52(const float &f) {
}
// Convert signed float to fixed-length string with 023.45 / -23.45 format
const char* ftostr52(const float &f) {
const char* ftostr52(const_float_t f) {
long i = INTFLOAT(f, 2);
conv[1] = MINUSOR(i, DIGIMOD(i, 10000));
conv[2] = DIGIMOD(i, 1000);
@ -242,7 +242,7 @@ const char* ftostr52(const float &f) {
}
// Convert signed float to fixed-length string with 12.345 / _2.345 / -2.345 or -23.45 / 123.45 format
const char* ftostr53_63(const float &f) {
const char* ftostr53_63(const_float_t f) {
if (f <= -10 || f >= 100) return ftostr63(f); // -23.456 / 123.456
long i = INTFLOAT(f, 3);
conv[1] = (f >= 0 && f < 10) ? ' ' : MINUSOR(i, DIGIMOD(i, 10000));
@ -255,7 +255,7 @@ const char* ftostr53_63(const float &f) {
}
// Convert signed float to fixed-length string with 023.456 / -23.456 format
const char* ftostr63(const float &f) {
const char* ftostr63(const_float_t f) {
long i = INTFLOAT(f, 3);
conv[0] = MINUSOR(i, DIGIMOD(i, 100000));
conv[1] = DIGIMOD(i, 10000);
@ -270,7 +270,7 @@ const char* ftostr63(const float &f) {
#if ENABLED(LCD_DECIMAL_SMALL_XY)
// Convert float to rj string with 1234, _123, -123, _-12, 12.3, _1.2, or -1.2 format
const char* ftostr4sign(const float &f) {
const char* ftostr4sign(const_float_t f) {
const int i = INTFLOAT(f, 1);
if (!WITHIN(i, -99, 999)) return i16tostr4signrj((int)f);
const bool neg = i < 0;
@ -285,7 +285,7 @@ const char* ftostr63(const float &f) {
#endif
// Convert float to fixed-length string with +12.3 / -12.3 format
const char* ftostr31sign(const float &f) {
const char* ftostr31sign(const_float_t f) {
int i = INTFLOAT(f, 1);
conv[2] = MINUSOR(i, '+');
conv[3] = DIGIMOD(i, 100);
@ -296,7 +296,7 @@ const char* ftostr31sign(const float &f) {
}
// Convert float to fixed-length string with +123.4 / -123.4 format
const char* ftostr41sign(const float &f) {
const char* ftostr41sign(const_float_t f) {
int i = INTFLOAT(f, 1);
conv[1] = MINUSOR(i, '+');
conv[2] = DIGIMOD(i, 1000);
@ -308,7 +308,7 @@ const char* ftostr41sign(const float &f) {
}
// Convert signed float to string (6 digit) with -1.234 / _0.000 / +1.234 format
const char* ftostr43sign(const float &f, char plus/*=' '*/) {
const char* ftostr43sign(const_float_t f, char plus/*=' '*/) {
long i = INTFLOAT(f, 3);
conv[1] = i ? MINUSOR(i, plus) : ' ';
conv[2] = DIGIMOD(i, 1000);
@ -320,7 +320,7 @@ const char* ftostr43sign(const float &f, char plus/*=' '*/) {
}
// Convert signed float to string (5 digit) with -1.2345 / _0.0000 / +1.2345 format
const char* ftostr54sign(const float &f, char plus/*=' '*/) {
const char* ftostr54sign(const_float_t f, char plus/*=' '*/) {
long i = INTFLOAT(f, 4);
conv[0] = i ? MINUSOR(i, plus) : ' ';
conv[1] = DIGIMOD(i, 10000);
@ -333,13 +333,13 @@ const char* ftostr54sign(const float &f, char plus/*=' '*/) {
}
// Convert unsigned float to rj string with 12345 format
const char* ftostr5rj(const float &f) {
const char* ftostr5rj(const_float_t f) {
const long i = UINTFLOAT(f, 0);
return ui16tostr5rj(i);
}
// Convert signed float to string with +1234.5 format
const char* ftostr51sign(const float &f) {
const char* ftostr51sign(const_float_t f) {
long i = INTFLOAT(f, 1);
conv[0] = MINUSOR(i, '+');
conv[1] = DIGIMOD(i, 10000);
@ -352,7 +352,7 @@ const char* ftostr51sign(const float &f) {
}
// Convert signed float to string with +123.45 format
const char* ftostr52sign(const float &f) {
const char* ftostr52sign(const_float_t f) {
long i = INTFLOAT(f, 2);
conv[0] = MINUSOR(i, '+');
conv[1] = DIGIMOD(i, 10000);
@ -365,7 +365,7 @@ const char* ftostr52sign(const float &f) {
}
// Convert signed float to string with +12.345 format
const char* ftostr53sign(const float &f) {
const char* ftostr53sign(const_float_t f) {
long i = INTFLOAT(f, 3);
conv[0] = MINUSOR(i, '+');
conv[1] = DIGIMOD(i, 10000);
@ -378,7 +378,7 @@ const char* ftostr53sign(const float &f) {
}
// Convert unsigned float to string with ____4.5, __34.5, _234.5, 1234.5 format
const char* ftostr51rj(const float &f) {
const char* ftostr51rj(const_float_t f) {
const long i = UINTFLOAT(f, 1);
conv[0] = ' ';
conv[1] = RJDIGIT(i, 10000);
@ -391,7 +391,7 @@ const char* ftostr51rj(const float &f) {
}
// Convert signed float to space-padded string with -_23.4_ format
const char* ftostr52sp(const float &f) {
const char* ftostr52sp(const_float_t f) {
long i = INTFLOAT(f, 2);
uint8_t dig;
conv[0] = MINUSOR(i, ' ');

49
Marlin/src/libs/numtostr.h
View File

@ -21,7 +21,8 @@
*/
#pragma once
#include <stdint.h>
#include "../inc/MarlinConfigPre.h"
#include "../core/types.h"
// Format uint8_t (0-100) as rj string with 123% / _12% / __1% format
const char* pcttostrpctrj(const uint8_t i);
@ -62,70 +63,66 @@ const char* i16tostr3left(const int16_t xx);
const char* i16tostr4signrj(const int16_t x);
// Convert unsigned float to string with 1.2 format
const char* ftostr11ns(const float &x);
const char* ftostr11ns(const_float_t x);
// Convert unsigned float to string with 1.23 format
const char* ftostr12ns(const float &x);
const char* ftostr12ns(const_float_t x);
// Convert unsigned float to string with 12.3 format
const char* ftostr31ns(const float &x);
const char* ftostr31ns(const_float_t x);
// Convert unsigned float to string with 123.4 format
const char* ftostr41ns(const float &x);
const char* ftostr41ns(const_float_t x);
// Convert signed float to fixed-length string with 12.34 / _2.34 / -2.34 or -23.45 / 123.45 format
const char* ftostr42_52(const float &x);
const char* ftostr42_52(const_float_t x);
// Convert signed float to fixed-length string with 023.45 / -23.45 format
const char* ftostr52(const float &x);
const char* ftostr52(const_float_t x);
// Convert signed float to fixed-length string with 12.345 / -2.345 or 023.456 / -23.456 format
const char* ftostr53_63(const float &x);
const char* ftostr53_63(const_float_t x);
// Convert signed float to fixed-length string with 023.456 / -23.456 format
const char* ftostr63(const float &x);
const char* ftostr63(const_float_t x);
// Convert float to fixed-length string with +12.3 / -12.3 format
const char* ftostr31sign(const float &x);
const char* ftostr31sign(const_float_t x);
// Convert float to fixed-length string with +123.4 / -123.4 format
const char* ftostr41sign(const float &x);
const char* ftostr41sign(const_float_t x);
// Convert signed float to string (6 digit) with -1.234 / _0.000 / +1.234 format
const char* ftostr43sign(const float &x, char plus=' ');
const char* ftostr43sign(const_float_t x, char plus=' ');
// Convert signed float to string (5 digit) with -1.2345 / _0.0000 / +1.2345 format
const char* ftostr54sign(const float &x, char plus=' ');
const char* ftostr54sign(const_float_t x, char plus=' ');
// Convert unsigned float to rj string with 12345 format
const char* ftostr5rj(const float &x);
const char* ftostr5rj(const_float_t x);
// Convert signed float to string with +1234.5 format
const char* ftostr51sign(const float &x);
const char* ftostr51sign(const_float_t x);
// Convert signed float to space-padded string with -_23.4_ format
const char* ftostr52sp(const float &x);
const char* ftostr52sp(const_float_t x);
// Convert signed float to string with +123.45 format
const char* ftostr52sign(const float &x);
const char* ftostr52sign(const_float_t x);
// Convert signed float to string with +12.345 format
const char* ftostr53sign(const float &f);
const char* ftostr53sign(const_float_t f);
// Convert unsigned float to string with 1234.5 format omitting trailing zeros
const char* ftostr51rj(const float &x);
#include "../core/macros.h"
const char* ftostr51rj(const_float_t x);
// Convert float to rj string with 123 or -12 format
FORCE_INLINE const char* ftostr3(const float &x) { return i16tostr3rj(int16_t(x + (x < 0 ? -0.5f : 0.5f))); }
#include "../inc/MarlinConfigPre.h"
FORCE_INLINE const char* ftostr3(const_float_t x) { return i16tostr3rj(int16_t(x + (x < 0 ? -0.5f : 0.5f))); }
#if ENABLED(LCD_DECIMAL_SMALL_XY)
// Convert float to rj string with 1234, _123, 12.3, _1.2, -123, _-12, or -1.2 format
const char* ftostr4sign(const float &fx);
const char* ftostr4sign(const_float_t fx);
#else
// Convert float to rj string with 1234, _123, -123, __12, _-12, ___1, or __-1 format
FORCE_INLINE const char* ftostr4sign(const float &x) { return i16tostr4signrj(int16_t(x + (x < 0 ? -0.5f : 0.5f))); }
FORCE_INLINE const char* ftostr4sign(const_float_t x) { return i16tostr4signrj(int16_t(x + (x < 0 ? -0.5f : 0.5f))); }
#endif

2
Marlin/src/libs/vector_3.h
View File

@ -45,7 +45,7 @@
class matrix_3x3;
struct vector_3 : xyz_float_t {
vector_3(const float &_x, const float &_y, const float &_z) { set(_x, _y, _z); }
vector_3(const_float_t _x, const_float_t _y, const_float_t _z) { set(_x, _y, _z); }
vector_3(const xy_float_t &in) { set(in.x, in.y); }
vector_3(const xyz_float_t &in) { set(in.x, in.y, in.z); }
vector_3(const xyze_float_t &in) { set(in.x, in.y, in.z); }

2
Marlin/src/module/delta.cpp
View File

@ -177,7 +177,7 @@ float delta_safe_distance_from_top() {
*
* The result is stored in the cartes[] array.
*/
void forward_kinematics(const float &z1, const float &z2, const float &z3) {
void forward_kinematics(const_float_t z1, const_float_t z2, const_float_t z3) {
// Create a vector in old coordinates along x axis of new coordinate
const float p12[3] = { delta_tower[B_AXIS].x - delta_tower[A_AXIS].x, delta_tower[B_AXIS].y - delta_tower[A_AXIS].y, z2 - z1 },

2
Marlin/src/module/delta.h
View File

@ -120,7 +120,7 @@ float delta_safe_distance_from_top();
*
* The result is stored in the cartes[] array.
*/
void forward_kinematics(const float &z1, const float &z2, const float &z3);
void forward_kinematics(const_float_t z1, const_float_t z2, const_float_t z3);
FORCE_INLINE void forward_kinematics(const abc_float_t &point) {
forward_kinematics(point.a, point.b, point.c);

32
Marlin/src/module/motion.cpp
View File

@ -311,12 +311,12 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
* Move the planner to the current position from wherever it last moved
* (or from wherever it has been told it is located).
*/
void line_to_current_position(const feedRate_t &fr_mm_s/*=feedrate_mm_s*/) {
void line_to_current_position(const_feedRate_t fr_mm_s/*=feedrate_mm_s*/) {
planner.buffer_line(current_position, fr_mm_s, active_extruder);
}
#if EXTRUDERS
void unscaled_e_move(const float &length, const feedRate_t &fr_mm_s) {
void unscaled_e_move(const_float_t length, const_feedRate_t fr_mm_s) {
TERN_(HAS_FILAMENT_SENSOR, runout.reset());
current_position.e += length / planner.e_factor[active_extruder];
line_to_current_position(fr_mm_s);
@ -329,7 +329,7 @@ void line_to_current_position(const feedRate_t &fr_mm_s/*=feedrate_mm_s*/) {
/**
* Buffer a fast move without interpolation. Set current_position to destination
*/
void prepare_fast_move_to_destination(const feedRate_t &scaled_fr_mm_s/*=MMS_SCALED(feedrate_mm_s)*/) {
void prepare_fast_move_to_destination(const_feedRate_t scaled_fr_mm_s/*=MMS_SCALED(feedrate_mm_s)*/) {
if (DEBUGGING(LEVELING)) DEBUG_POS("prepare_fast_move_to_destination", destination);
#if UBL_SEGMENTED
@ -351,7 +351,7 @@ void line_to_current_position(const feedRate_t &fr_mm_s/*=feedrate_mm_s*/) {
* - Move at normal speed regardless of feedrate percentage.
* - Extrude the specified length regardless of flow percentage.
*/
void _internal_move_to_destination(const feedRate_t &fr_mm_s/*=0.0f*/
void _internal_move_to_destination(const_feedRate_t fr_mm_s/*=0.0f*/
#if IS_KINEMATIC
, const bool is_fast/*=false*/
#endif
@ -384,7 +384,7 @@ void _internal_move_to_destination(const feedRate_t &fr_mm_s/*=0.0f*/
/**
* Plan a move to (X, Y, Z) and set the current_position
*/
void do_blocking_move_to(const float rx, const float ry, const float rz, const feedRate_t &fr_mm_s/*=0.0*/) {
void do_blocking_move_to(const float rx, const float ry, const float rz, const_feedRate_t fr_mm_s/*=0.0*/) {
DEBUG_SECTION(log_move, "do_blocking_move_to", DEBUGGING(LEVELING));
if (DEBUGGING(LEVELING)) DEBUG_XYZ("> ", rx, ry, rz);
@ -473,38 +473,38 @@ void do_blocking_move_to(const float rx, const float ry, const float rz, const f
planner.synchronize();
}
void do_blocking_move_to(const xy_pos_t &raw, const feedRate_t &fr_mm_s/*=0.0f*/) {
void do_blocking_move_to(const xy_pos_t &raw, const_feedRate_t fr_mm_s/*=0.0f*/) {
do_blocking_move_to(raw.x, raw.y, current_position.z, fr_mm_s);
}
void do_blocking_move_to(const xyz_pos_t &raw, const feedRate_t &fr_mm_s/*=0.0f*/) {
void do_blocking_move_to(const xyz_pos_t &raw, const_feedRate_t fr_mm_s/*=0.0f*/) {
do_blocking_move_to(raw.x, raw.y, raw.z, fr_mm_s);
}
void do_blocking_move_to(const xyze_pos_t &raw, const feedRate_t &fr_mm_s/*=0.0f*/) {
void do_blocking_move_to(const xyze_pos_t &raw, const_feedRate_t fr_mm_s/*=0.0f*/) {
do_blocking_move_to(raw.x, raw.y, raw.z, fr_mm_s);
}
void do_blocking_move_to_x(const float &rx, const feedRate_t &fr_mm_s/*=0.0*/) {
void do_blocking_move_to_x(const_float_t rx, const_feedRate_t fr_mm_s/*=0.0*/) {
do_blocking_move_to(rx, current_position.y, current_position.z, fr_mm_s);
}
void do_blocking_move_to_y(const float &ry, const feedRate_t &fr_mm_s/*=0.0*/) {
void do_blocking_move_to_y(const_float_t ry, const_feedRate_t fr_mm_s/*=0.0*/) {
do_blocking_move_to(current_position.x, ry, current_position.z, fr_mm_s);
}
void do_blocking_move_to_z(const float &rz, const feedRate_t &fr_mm_s/*=0.0*/) {
void do_blocking_move_to_z(const_float_t rz, const_feedRate_t fr_mm_s/*=0.0*/) {
do_blocking_move_to_xy_z(current_position, rz, fr_mm_s);
}
void do_blocking_move_to_xy(const float &rx, const float &ry, const feedRate_t &fr_mm_s/*=0.0*/) {
void do_blocking_move_to_xy(const_float_t rx, const_float_t ry, const_feedRate_t fr_mm_s/*=0.0*/) {
do_blocking_move_to(rx, ry, current_position.z, fr_mm_s);
}
void do_blocking_move_to_xy(const xy_pos_t &raw, const feedRate_t &fr_mm_s/*=0.0f*/) {
void do_blocking_move_to_xy(const xy_pos_t &raw, const_feedRate_t fr_mm_s/*=0.0f*/) {
do_blocking_move_to_xy(raw.x, raw.y, fr_mm_s);
}
void do_blocking_move_to_xy_z(const xy_pos_t &raw, const float &z, const feedRate_t &fr_mm_s/*=0.0f*/) {
void do_blocking_move_to_xy_z(const xy_pos_t &raw, const_float_t z, const_feedRate_t fr_mm_s/*=0.0f*/) {
do_blocking_move_to(raw.x, raw.y, z, fr_mm_s);
}
void do_z_clearance(const float &zclear, const bool lower_allowed/*=false*/) {
void do_z_clearance(const_float_t zclear, const bool lower_allowed/*=false*/) {
float zdest = zclear;
if (!lower_allowed) NOLESS(zdest, current_position.z);
do_blocking_move_to_z(_MIN(zdest, Z_MAX_POS), TERN(HAS_BED_PROBE, z_probe_fast_mm_s, homing_feedrate(Z_AXIS)));
@ -826,7 +826,7 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
* small incremental moves. This allows the planner to
* apply more detailed bed leveling to the full move.
*/
inline void segmented_line_to_destination(const feedRate_t &fr_mm_s, const float segment_size=LEVELED_SEGMENT_LENGTH) {
inline void segmented_line_to_destination(const_feedRate_t fr_mm_s, const float segment_size=LEVELED_SEGMENT_LENGTH) {
const xyze_float_t diff = destination - current_position;

46
Marlin/src/module/motion.h
View File

@ -229,28 +229,28 @@ void sync_plan_position_e();
* Move the planner to the current position from wherever it last moved
* (or from wherever it has been told it is located).
*/
void line_to_current_position(const feedRate_t &fr_mm_s=feedrate_mm_s);
void line_to_current_position(const_feedRate_t fr_mm_s=feedrate_mm_s);
#if EXTRUDERS
void unscaled_e_move(const float &length, const feedRate_t &fr_mm_s);
void unscaled_e_move(const_float_t length, const_feedRate_t fr_mm_s);
#endif
void prepare_line_to_destination();
void _internal_move_to_destination(const feedRate_t &fr_mm_s=0.0f
void _internal_move_to_destination(const_feedRate_t fr_mm_s=0.0f
#if IS_KINEMATIC
, const bool is_fast=false
#endif
);
inline void prepare_internal_move_to_destination(const feedRate_t &fr_mm_s=0.0f) {
inline void prepare_internal_move_to_destination(const_feedRate_t fr_mm_s=0.0f) {
_internal_move_to_destination(fr_mm_s);
}
#if IS_KINEMATIC
void prepare_fast_move_to_destination(const feedRate_t &scaled_fr_mm_s=MMS_SCALED(feedrate_mm_s));
void prepare_fast_move_to_destination(const_feedRate_t scaled_fr_mm_s=MMS_SCALED(feedrate_mm_s));
inline void prepare_internal_fast_move_to_destination(const feedRate_t &fr_mm_s=0.0f) {
inline void prepare_internal_fast_move_to_destination(const_feedRate_t fr_mm_s=0.0f) {
_internal_move_to_destination(fr_mm_s, true);
}
#endif
@ -258,29 +258,29 @@ inline void prepare_internal_move_to_destination(const feedRate_t &fr_mm_s=0.0f)
/**
* Blocking movement and shorthand functions
*/
void do_blocking_move_to(const float rx, const float ry, const float rz, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to(const xy_pos_t &raw, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to(const xyz_pos_t &raw, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to(const xyze_pos_t &raw, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to(const float rx, const float ry, const float rz, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to(const xy_pos_t &raw, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to(const xyz_pos_t &raw, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to(const xyze_pos_t &raw, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to_x(const float &rx, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to_y(const float &ry, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to_z(const float &rz, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to_x(const_float_t rx, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to_y(const_float_t ry, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to_z(const_float_t rz, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to_xy(const float &rx, const float &ry, const feedRate_t &fr_mm_s=0.0f);
void do_blocking_move_to_xy(const xy_pos_t &raw, const feedRate_t &fr_mm_s=0.0f);
FORCE_INLINE void do_blocking_move_to_xy(const xyz_pos_t &raw, const feedRate_t &fr_mm_s=0.0f) { do_blocking_move_to_xy(xy_pos_t(raw), fr_mm_s); }
FORCE_INLINE void do_blocking_move_to_xy(const xyze_pos_t &raw, const feedRate_t &fr_mm_s=0.0f) { do_blocking_move_to_xy(xy_pos_t(raw), fr_mm_s); }
void do_blocking_move_to_xy(const_float_t rx, const_float_t ry, const_feedRate_t fr_mm_s=0.0f);
void do_blocking_move_to_xy(const xy_pos_t &raw, const_feedRate_t fr_mm_s=0.0f);
FORCE_INLINE void do_blocking_move_to_xy(const xyz_pos_t &raw, const_feedRate_t fr_mm_s=0.0f) { do_blocking_move_to_xy(xy_pos_t(raw), fr_mm_s); }
FORCE_INLINE void do_blocking_move_to_xy(const xyze_pos_t &raw, const_feedRate_t fr_mm_s=0.0f) { do_blocking_move_to_xy(xy_pos_t(raw), fr_mm_s); }
void do_blocking_move_to_xy_z(const xy_pos_t &raw, const float &z, const feedRate_t &fr_mm_s=0.0f);
FORCE_INLINE void do_blocking_move_to_xy_z(const xyz_pos_t &raw, const float &z, const feedRate_t &fr_mm_s=0.0f) { do_blocking_move_to_xy_z(xy_pos_t(raw), z, fr_mm_s); }
FORCE_INLINE void do_blocking_move_to_xy_z(const xyze_pos_t &raw, const float &z, const feedRate_t &fr_mm_s=0.0f) { do_blocking_move_to_xy_z(xy_pos_t(raw), z, fr_mm_s); }
void do_blocking_move_to_xy_z(const xy_pos_t &raw, const_float_t z, const_feedRate_t fr_mm_s=0.0f);
FORCE_INLINE void do_blocking_move_to_xy_z(const xyz_pos_t &raw, const_float_t z, const_feedRate_t fr_mm_s=0.0f) { do_blocking_move_to_xy_z(xy_pos_t(raw), z, fr_mm_s); }
FORCE_INLINE void do_blocking_move_to_xy_z(const xyze_pos_t &raw, const_float_t z, const_feedRate_t fr_mm_s=0.0f) { do_blocking_move_to_xy_z(xy_pos_t(raw), z, fr_mm_s); }
void remember_feedrate_and_scaling();
void remember_feedrate_scaling_off();
void restore_feedrate_and_scaling();
void do_z_clearance(const float &zclear, const bool lower_allowed=false);
void do_z_clearance(const_float_t zclear, const bool lower_allowed=false);
/**
* Homing and Trusted Axes
@ -393,7 +393,7 @@ FORCE_INLINE bool all_axes_trusted() { return xyz_bits ==
#endif
// Return true if the given point is within the printable area
inline bool position_is_reachable(const float &rx, const float &ry, const float inset=0) {
inline bool position_is_reachable(const_float_t rx, const_float_t ry, const float inset=0) {
#if ENABLED(DELTA)
return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS - inset + fslop);
@ -428,7 +428,7 @@ FORCE_INLINE bool all_axes_trusted() { return xyz_bits ==
#else // CARTESIAN
// Return true if the given position is within the machine bounds.
inline bool position_is_reachable(const float &rx, const float &ry) {
inline bool position_is_reachable(const_float_t rx, const_float_t ry) {
if (!COORDINATE_OKAY(ry, Y_MIN_POS - fslop, Y_MAX_POS + fslop)) return false;
#if ENABLED(DUAL_X_CARRIAGE)
if (active_extruder)

22
Marlin/src/module/planner.cpp
View File

@ -775,7 +775,7 @@ block_t* Planner::get_current_block() {
* is not and will not use the block while we modify it, so it is safe to
* alter its values.
*/
void Planner::calculate_trapezoid_for_block(block_t * const block, const float &entry_factor, const float &exit_factor) {
void Planner::calculate_trapezoid_for_block(block_t * const block, const_float_t entry_factor, const_float_t exit_factor) {
uint32_t initial_rate = CEIL(block->nominal_rate * entry_factor),
final_rate = CEIL(block->nominal_rate * exit_factor); // (steps per second)
@ -1463,7 +1463,7 @@ void Planner::check_axes_activity() {
* This is the reciprocal of the circular cross-section area.
* Return 1.0 with volumetric off or a diameter of 0.0.
*/
inline float calculate_volumetric_multiplier(const float &diameter) {
inline float calculate_volumetric_multiplier(const_float_t diameter) {
return (parser.volumetric_enabled && diameter) ? 1.0f / CIRCLE_AREA(diameter * 0.5f) : 1;
}
@ -1745,7 +1745,7 @@ bool Planner::_buffer_steps(const xyze_long_t &target
#if HAS_DIST_MM_ARG
, const xyze_float_t &cart_dist_mm
#endif
, feedRate_t fr_mm_s, const uint8_t extruder, const float &millimeters
, feedRate_t fr_mm_s, const uint8_t extruder, const_float_t millimeters
) {
// Wait for the next available block
@ -1811,7 +1811,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#if HAS_DIST_MM_ARG
, const xyze_float_t &cart_dist_mm
#endif
, feedRate_t fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/
, feedRate_t fr_mm_s, const uint8_t extruder, const_float_t millimeters/*=0.0*/
) {
const int32_t da = target.a - position.a,
@ -2745,11 +2745,11 @@ void Planner::buffer_sync_block(TERN_(LASER_SYNCHRONOUS_M106_M107, uint8_t sync_
*
* Return 'false' if no segment was queued due to cleaning, cold extrusion, full queue, etc.
*/
bool Planner::buffer_segment(const float &a, const float &b, const float &c, const float &e
bool Planner::buffer_segment(const_float_t a, const_float_t b, const_float_t c, const_float_t e
#if HAS_DIST_MM_ARG
, const xyze_float_t &cart_dist_mm
#endif
, const feedRate_t &fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/
, const_feedRate_t fr_mm_s, const uint8_t extruder, const_float_t millimeters/*=0.0*/
) {
// If we are cleaning, do not accept queuing of movements
@ -2839,9 +2839,9 @@ bool Planner::buffer_segment(const float &a, const float &b, const float &c, con
* millimeters - the length of the movement, if known
* inv_duration - the reciprocal if the duration of the movement, if known (kinematic only if feeedrate scaling is enabled)
*/
bool Planner::buffer_line(const float &rx, const float &ry, const float &rz, const float &e, const feedRate_t &fr_mm_s, const uint8_t extruder, const float millimeters
bool Planner::buffer_line(const_float_t rx, const_float_t ry, const_float_t rz, const_float_t e, const_feedRate_t fr_mm_s, const uint8_t extruder, const float millimeters
#if ENABLED(SCARA_FEEDRATE_SCALING)
, const float &inv_duration
, const_float_t inv_duration
#endif
) {
xyze_pos_t machine = { rx, ry, rz, e };
@ -2960,7 +2960,7 @@ bool Planner::buffer_line(const float &rx, const float &ry, const float &rz, con
* The provided ABC position is in machine units.
*/
void Planner::set_machine_position_mm(const float &a, const float &b, const float &c, const float &e) {
void Planner::set_machine_position_mm(const_float_t a, const_float_t b, const_float_t c, const_float_t e) {
TERN_(DISTINCT_E_FACTORS, last_extruder = active_extruder);
TERN_(HAS_POSITION_FLOAT, position_float.set(a, b, c, e));
position.set(LROUND(a * settings.axis_steps_per_mm[A_AXIS]),
@ -2976,7 +2976,7 @@ void Planner::set_machine_position_mm(const float &a, const float &b, const floa
stepper.set_position(position);
}
void Planner::set_position_mm(const float &rx, const float &ry, const float &rz, const float &e) {
void Planner::set_position_mm(const_float_t rx, const_float_t ry, const_float_t rz, const_float_t e) {
xyze_pos_t machine = { rx, ry, rz, e };
#if HAS_POSITION_MODIFIERS
apply_modifiers(machine, true);
@ -2993,7 +2993,7 @@ void Planner::set_position_mm(const float &rx, const float &ry, const float &rz,
/**
* Setters for planner position (also setting stepper position).
*/
void Planner::set_e_position_mm(const float &e) {
void Planner::set_e_position_mm(const_float_t e) {
const uint8_t axis_index = E_AXIS_N(active_extruder);
TERN_(DISTINCT_E_FACTORS, last_extruder = active_extruder);

56
Marlin/src/module/planner.h
View File

@ -491,7 +491,7 @@ class Planner {
#if HAS_CLASSIC_JERK
static void set_max_jerk(const AxisEnum axis, float inMaxJerkMMS);
#else
static inline void set_max_jerk(const AxisEnum, const float&) {}
static inline void set_max_jerk(const AxisEnum, const_float_t ) {}
#endif
#if EXTRUDERS
@ -541,7 +541,7 @@ class Planner {
static void calculate_volumetric_extruder_limits();
#endif
FORCE_INLINE static void set_filament_size(const uint8_t e, const float &v) {
FORCE_INLINE static void set_filament_size(const uint8_t e, const_float_t v) {
filament_size[e] = v;
if (v > 0) volumetric_area_nominal = CIRCLE_AREA(v * 0.5); //TODO: should it be per extruder
// make sure all extruders have some sane value for the filament size
@ -552,7 +552,7 @@ class Planner {
#endif
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
FORCE_INLINE static void set_volumetric_extruder_limit(const uint8_t e, const float &v) {
FORCE_INLINE static void set_volumetric_extruder_limit(const uint8_t e, const_float_t v) {
volumetric_extruder_limit[e] = v;
calculate_volumetric_extruder_limit(e);
}
@ -567,7 +567,7 @@ class Planner {
* Returns 1.0 if planner.z_fade_height is 0.0.
* Returns 0.0 if Z is past the specified 'Fade Height'.
*/
static inline float fade_scaling_factor_for_z(const float &rz) {
static inline float fade_scaling_factor_for_z(const_float_t rz) {
static float z_fade_factor = 1;
if (!z_fade_height) return 1;
if (rz >= z_fade_height) return 0;
@ -580,27 +580,27 @@ class Planner {
FORCE_INLINE static void force_fade_recalc() { last_fade_z = -999.999f; }
FORCE_INLINE static void set_z_fade_height(const float &zfh) {
FORCE_INLINE static void set_z_fade_height(const_float_t zfh) {
z_fade_height = zfh > 0 ? zfh : 0;
inverse_z_fade_height = RECIPROCAL(z_fade_height);
force_fade_recalc();
}
FORCE_INLINE static bool leveling_active_at_z(const float &rz) {
FORCE_INLINE static bool leveling_active_at_z(const_float_t rz) {
return !z_fade_height || rz < z_fade_height;
}
#else
FORCE_INLINE static float fade_scaling_factor_for_z(const float&) { return 1; }
FORCE_INLINE static float fade_scaling_factor_for_z(const_float_t ) { return 1; }
FORCE_INLINE static bool leveling_active_at_z(const float&) { return true; }
FORCE_INLINE static bool leveling_active_at_z(const_float_t ) { return true; }
#endif
#if ENABLED(SKEW_CORRECTION)
FORCE_INLINE static void skew(float &cx, float &cy, const float &cz) {
FORCE_INLINE static void skew(float &cx, float &cy, const_float_t cz) {
if (COORDINATE_OKAY(cx, X_MIN_POS + 1, X_MAX_POS) && COORDINATE_OKAY(cy, Y_MIN_POS + 1, Y_MAX_POS)) {
const float sx = cx - cy * skew_factor.xy - cz * (skew_factor.xz - (skew_factor.xy * skew_factor.yz)),
sy = cy - cz * skew_factor.yz;
@ -611,7 +611,7 @@ class Planner {
}
FORCE_INLINE static void skew(xyz_pos_t &raw) { skew(raw.x, raw.y, raw.z); }
FORCE_INLINE static void unskew(float &cx, float &cy, const float &cz) {
FORCE_INLINE static void unskew(float &cx, float &cy, const_float_t cz) {
if (COORDINATE_OKAY(cx, X_MIN_POS, X_MAX_POS) && COORDINATE_OKAY(cy, Y_MIN_POS, Y_MAX_POS)) {
const float sx = cx + cy * skew_factor.xy + cz * skew_factor.xz,
sy = cy + cz * skew_factor.yz;
@ -713,7 +713,7 @@ class Planner {
#if HAS_DIST_MM_ARG
, const xyze_float_t &cart_dist_mm
#endif
, feedRate_t fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
, feedRate_t fr_mm_s, const uint8_t extruder, const_float_t millimeters=0.0
);
/**
@ -736,7 +736,7 @@ class Planner {
#if HAS_DIST_MM_ARG
, const xyze_float_t &cart_dist_mm
#endif
, feedRate_t fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
, feedRate_t fr_mm_s, const uint8_t extruder, const_float_t millimeters=0.0
);
/**
@ -767,18 +767,18 @@ class Planner {
* extruder - target extruder
* millimeters - the length of the movement, if known
*/
static bool buffer_segment(const float &a, const float &b, const float &c, const float &e
static bool buffer_segment(const_float_t a, const_float_t b, const_float_t c, const_float_t e
#if HAS_DIST_MM_ARG
, const xyze_float_t &cart_dist_mm
#endif
, const feedRate_t &fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
, const_feedRate_t fr_mm_s, const uint8_t extruder, const_float_t millimeters=0.0
);
FORCE_INLINE static bool buffer_segment(abce_pos_t &abce
#if HAS_DIST_MM_ARG
, const xyze_float_t &cart_dist_mm
#endif
, const feedRate_t &fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
, const_feedRate_t fr_mm_s, const uint8_t extruder, const_float_t millimeters=0.0
) {
return buffer_segment(abce.a, abce.b, abce.c, abce.e
#if HAS_DIST_MM_ARG
@ -800,15 +800,15 @@ class Planner {
* millimeters - the length of the movement, if known
* inv_duration - the reciprocal if the duration of the movement, if known (kinematic only if feeedrate scaling is enabled)
*/
static bool buffer_line(const float &rx, const float &ry, const float &rz, const float &e, const feedRate_t &fr_mm_s, const uint8_t extruder, const float millimeters=0.0
static bool buffer_line(const_float_t rx, const_float_t ry, const_float_t rz, const_float_t e, const_feedRate_t fr_mm_s, const uint8_t extruder, const float millimeters=0.0
#if ENABLED(SCARA_FEEDRATE_SCALING)
, const float &inv_duration=0.0
, const_float_t inv_duration=0.0
#endif
);
FORCE_INLINE static bool buffer_line(const xyze_pos_t &cart, const feedRate_t &fr_mm_s, const uint8_t extruder, const float millimeters=0.0
FORCE_INLINE static bool buffer_line(const xyze_pos_t &cart, const_feedRate_t fr_mm_s, const uint8_t extruder, const float millimeters=0.0
#if ENABLED(SCARA_FEEDRATE_SCALING)
, const float &inv_duration=0.0
, const_float_t inv_duration=0.0
#endif
) {
return buffer_line(cart.x, cart.y, cart.z, cart.e, fr_mm_s, extruder, millimeters
@ -835,9 +835,9 @@ class Planner {
*
* Clears previous speed values.
*/
static void set_position_mm(const float &rx, const float &ry, const float &rz, const float &e);
static void set_position_mm(const_float_t rx, const_float_t ry, const_float_t rz, const_float_t e);
FORCE_INLINE static void set_position_mm(const xyze_pos_t &cart) { set_position_mm(cart.x, cart.y, cart.z, cart.e); }
static void set_e_position_mm(const float &e);
static void set_e_position_mm(const_float_t e);
/**
* Set the planner.position and individual stepper positions.
@ -845,7 +845,7 @@ class Planner {
* The supplied position is in machine space, and no additional
* conversions are applied.
*/
static void set_machine_position_mm(const float &a, const float &b, const float &c, const float &e);
static void set_machine_position_mm(const_float_t a, const_float_t b, const_float_t c, const_float_t e);
FORCE_INLINE static void set_machine_position_mm(const abce_pos_t &abce) { set_machine_position_mm(abce.a, abce.b, abce.c, abce.e); }
/**
@ -957,7 +957,7 @@ class Planner {
* Calculate the distance (not time) it takes to accelerate
* from initial_rate to target_rate using the given acceleration:
*/
static float estimate_acceleration_distance(const float &initial_rate, const float &target_rate, const float &accel) {
static float estimate_acceleration_distance(const_float_t initial_rate, const_float_t target_rate, const_float_t accel) {
if (accel == 0) return 0; // accel was 0, set acceleration distance to 0
return (sq(target_rate) - sq(initial_rate)) / (accel * 2);
}
@ -970,7 +970,7 @@ class Planner {
* This is used to compute the intersection point between acceleration and deceleration
* in cases where the "trapezoid" has no plateau (i.e., never reaches maximum speed)
*/
static float intersection_distance(const float &initial_rate, const float &final_rate, const float &accel, const float &distance) {
static float intersection_distance(const_float_t initial_rate, const_float_t final_rate, const_float_t accel, const_float_t distance) {
if (accel == 0) return 0; // accel was 0, set intersection distance to 0
return (accel * 2 * distance - sq(initial_rate) + sq(final_rate)) / (accel * 4);
}
@ -980,7 +980,7 @@ class Planner {
* to reach 'target_velocity_sqr' using 'acceleration' within a given
* 'distance'.
*/
static float max_allowable_speed_sqr(const float &accel, const float &target_velocity_sqr, const float &distance) {
static float max_allowable_speed_sqr(const_float_t accel, const_float_t target_velocity_sqr, const_float_t distance) {
return target_velocity_sqr - 2 * accel * distance;
}
@ -988,12 +988,12 @@ class Planner {
/**
* Calculate the speed reached given initial speed, acceleration and distance
*/
static float final_speed(const float &initial_velocity, const float &accel, const float &distance) {
static float final_speed(const_float_t initial_velocity, const_float_t accel, const_float_t distance) {
return SQRT(sq(initial_velocity) + 2 * accel * distance);
}
#endif
static void calculate_trapezoid_for_block(block_t * const block, const float &entry_factor, const float &exit_factor);
static void calculate_trapezoid_for_block(block_t * const block, const_float_t entry_factor, const_float_t exit_factor);
static void reverse_pass_kernel(block_t * const current, const block_t * const next);
static void forward_pass_kernel(const block_t * const previous, block_t * const current, uint8_t block_index);
@ -1013,7 +1013,7 @@ class Planner {
vector *= RSQRT(magnitude_sq);
}
FORCE_INLINE static float limit_value_by_axis_maximum(const float &max_value, xyze_float_t &unit_vec) {
FORCE_INLINE static float limit_value_by_axis_maximum(const_float_t max_value, xyze_float_t &unit_vec) {
float limit_value = max_value;
LOOP_XYZE(idx) {
if (unit_vec[idx]) {

8
Marlin/src/module/planner_bezier.cpp
View File

@ -43,7 +43,7 @@
#define SIGMA 0.1f
// Compute the linear interpolation between two real numbers.
static inline float interp(const float &a, const float &b, const float &t) { return (1 - t) * a + t * b; }
static inline float interp(const_float_t a, const_float_t b, const_float_t t) { return (1 - t) * a + t * b; }
/**
* Compute a Bézier curve using the De Casteljau's algorithm (see
@ -51,7 +51,7 @@ static inline float interp(const float &a, const float &b, const float &t) { ret
* easy to code and has good numerical stability (very important,
* since Arudino works with limited precision real numbers).
*/
static inline float eval_bezier(const float &a, const float &b, const float &c, const float &d, const float &t) {
static inline float eval_bezier(const_float_t a, const_float_t b, const_float_t c, const_float_t d, const_float_t t) {
const float iab = interp(a, b, t),
ibc = interp(b, c, t),
icd = interp(c, d, t),
@ -64,7 +64,7 @@ static inline float eval_bezier(const float &a, const float &b, const float &c,
* We approximate Euclidean distance with the sum of the coordinates
* offset (so-called "norm 1"), which is quicker to compute.
*/
static inline float dist1(const float &x1, const float &y1, const float &x2, const float &y2) { return ABS(x1 - x2) + ABS(y1 - y2); }
static inline float dist1(const_float_t x1, const_float_t y1, const_float_t x2, const_float_t y2) { return ABS(x1 - x2) + ABS(y1 - y2); }
/**
* The algorithm for computing the step is loosely based on the one in Kig
@ -109,7 +109,7 @@ void cubic_b_spline(
const xyze_pos_t &position, // current position
const xyze_pos_t &target, // target position
const xy_pos_t (&offsets)[2], // a pair of offsets
const feedRate_t &scaled_fr_mm_s, // mm/s scaled by feedrate %
const_feedRate_t scaled_fr_mm_s, // mm/s scaled by feedrate %
const uint8_t extruder
) {
// Absolute first and second control points are recovered.

2
Marlin/src/module/planner_bezier.h
View File

@ -33,6 +33,6 @@ void cubic_b_spline(
const xyze_pos_t &position, // current position
const xyze_pos_t &target, // target position
const xy_pos_t (&offsets)[2], // a pair of offsets
const feedRate_t &scaled_fr_mm_s, // mm/s scaled by feedrate %
const_feedRate_t scaled_fr_mm_s, // mm/s scaled by feedrate %
const uint8_t extruder
);

6
Marlin/src/module/probe.cpp
View File

@ -475,7 +475,7 @@ bool Probe::set_deployed(const bool deploy) {
*
* @return TRUE if the probe failed to trigger.
*/
bool Probe::probe_down_to_z(const float z, const feedRate_t fr_mm_s) {
bool Probe::probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s) {
DEBUG_SECTION(log_probe, "Probe::probe_down_to_z", DEBUGGING(LEVELING));
#if BOTH(HAS_HEATED_BED, WAIT_FOR_BED_HEATER)
@ -588,7 +588,7 @@ bool Probe::probe_down_to_z(const float z, const feedRate_t fr_mm_s) {
float Probe::run_z_probe(const bool sanity_check/*=true*/) {
DEBUG_SECTION(log_probe, "Probe::run_z_probe", DEBUGGING(LEVELING));
auto try_to_probe = [&](PGM_P const plbl, const float &z_probe_low_point, const feedRate_t fr_mm_s, const bool scheck, const float clearance) -> bool {
auto try_to_probe = [&](PGM_P const plbl, const_float_t z_probe_low_point, const feedRate_t fr_mm_s, const bool scheck, const float clearance) -> bool {
// Tare the probe, if supported
if (TERN0(PROBE_TARE, tare())) return true;
@ -743,7 +743,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) {
* - Raise to the BETWEEN height
* - Return the probed Z position
*/
float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/, const bool sanity_check/*=true*/) {
float Probe::probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/, const bool sanity_check/*=true*/) {
DEBUG_SECTION(log_probe, "Probe::probe_at_point", DEBUGGING(LEVELING));
if (DEBUGGING(LEVELING)) {

12
Marlin/src/module/probe.h
View File

@ -71,12 +71,12 @@ public:
#if HAS_PROBE_XY_OFFSET
// Return true if the both nozzle and the probe can reach the given point.
// Note: This won't work on SCARA since the probe offset rotates with the arm.
static bool can_reach(const float &rx, const float &ry) {
static bool can_reach(const_float_t rx, const_float_t ry) {
return position_is_reachable(rx - offset_xy.x, ry - offset_xy.y) // The nozzle can go where it needs to go?
&& position_is_reachable(rx, ry, ABS(PROBING_MARGIN)); // Can the nozzle also go near there?
}
#else
static bool can_reach(const float &rx, const float &ry) {
static bool can_reach(const_float_t rx, const_float_t ry) {
return position_is_reachable(rx, ry, PROBING_MARGIN);
}
#endif
@ -90,7 +90,7 @@ public:
* Example: For a probe offset of -10,+10, then for the probe to reach 0,0 the
* nozzle must be be able to reach +10,-10.
*/
static bool can_reach(const float &rx, const float &ry) {
static bool can_reach(const_float_t rx, const_float_t ry) {
return position_is_reachable(rx - offset_xy.x, ry - offset_xy.y)
&& COORDINATE_OKAY(rx, min_x() - fslop, max_x() + fslop)
&& COORDINATE_OKAY(ry, min_y() - fslop, max_y() + fslop);
@ -103,7 +103,7 @@ public:
do_z_clearance(Z_AFTER_PROBING, true); // Move down still permitted
#endif
}
static float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true);
static float probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true);
static float probe_at_point(const xy_pos_t &pos, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true) {
return probe_at_point(pos.x, pos.y, raise_after, verbose_level, probe_relative, sanity_check);
}
@ -114,7 +114,7 @@ public:
static bool set_deployed(const bool) { return false; }
static bool can_reach(const float &rx, const float &ry) { return position_is_reachable(rx, ry); }
static bool can_reach(const_float_t rx, const_float_t ry) { return position_is_reachable(rx, ry); }
#endif
@ -257,7 +257,7 @@ public:
#endif
private:
static bool probe_down_to_z(const float z, const feedRate_t fr_mm_s);
static bool probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s);
static void do_z_raise(const float z_raise);
static float run_z_probe(const bool sanity_check=true);
};

4
Marlin/src/module/scara.cpp
View File

@ -48,7 +48,7 @@ float segments_per_second = TERN(AXEL_TPARA, TPARA_SEGMENTS_PER_SECOND, SCARA_SE
* Maths and first version by QHARLEY.
* Integrated into Marlin and slightly restructured by Joachim Cerny.
*/
void forward_kinematics(const float &a, const float &b) {
void forward_kinematics(const_float_t a, const_float_t b) {
const float a_sin = sin(RADIANS(a)) * L1,
a_cos = cos(RADIANS(a)) * L1,
b_sin = sin(RADIANS(b + TERN0(MP_SCARA, a))) * L2,
@ -197,7 +197,7 @@ float segments_per_second = TERN(AXEL_TPARA, TPARA_SEGMENTS_PER_SECOND, SCARA_SE
}
// Convert ABC inputs in degrees to XYZ outputs in mm
void forward_kinematics(const float &a, const float &b, const float &c) {
void forward_kinematics(const_float_t a, const_float_t b, const_float_t c) {
const float w = c - b,
r = L1 * cos(RADIANS(b)) + L2 * sin(RADIANS(w - (90 - b))),
x = r * cos(RADIANS(a)),

4
Marlin/src/module/scara.h
View File

@ -35,7 +35,7 @@ extern float segments_per_second;
L1_2 = sq(float(L1)), L1_2_2 = 2.0 * L1_2,
L2_2 = sq(float(L2));
void forward_kinematics(const float &a, const float &b, const float &c);
void forward_kinematics(const_float_t a, const_float_t b, const_float_t c);
void home_TPARA();
#else
@ -44,7 +44,7 @@ extern float segments_per_second;
L1_2 = sq(float(L1)), L1_2_2 = 2.0 * L1_2,
L2_2 = sq(float(L2));
void forward_kinematics(const float &a, const float &b);
void forward_kinematics(const_float_t a, const_float_t b);
#endif

8
Marlin/src/module/temperature.cpp
View File

@ -499,7 +499,7 @@ volatile bool Temperature::raw_temps_ready = false;
* Needs sufficient heater power to make some overshoot at target
* temperature to succeed.
*/
void Temperature::PID_autotune(const float &target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result/*=false*/) {
void Temperature::PID_autotune(const_float_t target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result/*=false*/) {
float current_temp = 0.0;
int cycles = 0;
bool heating = true;
@ -2336,7 +2336,7 @@ void Temperature::init() {
*
* TODO: Embed the last 3 parameters during init, if not less optimal
*/
void Temperature::tr_state_machine_t::run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const celsius_t hysteresis_degc) {
void Temperature::tr_state_machine_t::run(const_float_t current, const_float_t target, const heater_id_t heater_id, const uint16_t period_seconds, const celsius_t hysteresis_degc) {
#if HEATER_IDLE_HANDLER
// Convert the given heater_id_t to an idle array index
@ -3371,7 +3371,7 @@ void Temperature::tick() {
#include "../gcode/gcode.h"
static void print_heater_state(const float &c, const float &t
static void print_heater_state(const_float_t c, const_float_t t
#if ENABLED(SHOW_TEMP_ADC_VALUES)
, const float r
#endif
@ -3804,7 +3804,7 @@ void Temperature::tick() {
#define MIN_DELTA_SLOPE_TIME_PROBE 600
#endif
bool Temperature::wait_for_probe(const float target_temp, bool no_wait_for_cooling/*=true*/) {
bool Temperature::wait_for_probe(const_float_t target_temp, bool no_wait_for_cooling/*=true*/) {
const bool wants_to_cool = isProbeAboveTemp(target_temp);
const bool will_wait = !(wants_to_cool && no_wait_for_cooling);

14
Marlin/src/module/temperature.h
View File

@ -688,7 +688,7 @@ class Temperature {
return degTargetHotend(e) > TEMP_HYSTERESIS && ABS(degHotend(e) - degTargetHotend(e)) > TEMP_HYSTERESIS;
}
FORCE_INLINE static bool degHotendNear(const uint8_t e, const float &temp) {
FORCE_INLINE static bool degHotendNear(const uint8_t e, const_float_t temp) {
return ABS(degHotend(e) - temp) < (TEMP_HYSTERESIS);
}
@ -724,7 +724,7 @@ class Temperature {
static void wait_for_bed_heating();
FORCE_INLINE static bool degBedNear(const float &temp) {
FORCE_INLINE static bool degBedNear(const_float_t temp) {
return ABS(degBed() - temp) < (TEMP_BED_HYSTERESIS);
}
@ -735,9 +735,9 @@ class Temperature {
FORCE_INLINE static int16_t rawProbeTemp() { return temp_probe.raw; }
#endif
FORCE_INLINE static float degProbe() { return temp_probe.celsius; }
FORCE_INLINE static bool isProbeBelowTemp(const float target_temp) { return temp_probe.celsius < target_temp; }
FORCE_INLINE static bool isProbeAboveTemp(const float target_temp) { return temp_probe.celsius > target_temp; }
static bool wait_for_probe(const float target_temp, bool no_wait_for_cooling=true);
FORCE_INLINE static bool isProbeBelowTemp(const_float_t target_temp) { return temp_probe.celsius < target_temp; }
FORCE_INLINE static bool isProbeAboveTemp(const_float_t target_temp) { return temp_probe.celsius > target_temp; }
static bool wait_for_probe(const_float_t target_temp, bool no_wait_for_cooling=true);
#endif
#if WATCH_PROBE
@ -825,7 +825,7 @@ class Temperature {
static bool pid_debug_flag;
#endif
static void PID_autotune(const float &target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result=false);
static void PID_autotune(const_float_t target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result=false);
#if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)
static bool adaptive_fan_slowing;
@ -959,7 +959,7 @@ class Temperature {
millis_t timer = 0;
TRState state = TRInactive;
float running_temp;
void run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const celsius_t hysteresis_degc);
void run(const_float_t current, const_float_t target, const heater_id_t heater_id, const uint16_t period_seconds, const celsius_t hysteresis_degc);
} tr_state_machine_t;
static tr_state_machine_t tr_state_machine[NR_HEATER_RUNAWAY];