bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Misc. improvements (#12747)

Browse Source 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
This commit is contained in:
Marcio Teixeira
2019-01-01 14:17:48 -07:00
committed by Scott Lahteine
parent 4f2473053c
commit 60cb36bef3
12 changed files with 188 additions and 209 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
View File

@@ -80,20 +80,13 @@ static uint8_t rs_last_state = 255;
static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val) {
if ( rs != rs_last_state) { // time to send a command/data byte
if (rs != rs_last_state) { // Time to send a command/data byte
rs_last_state = rs;
if ( rs == 0 )
/* command */
spiSend(0x0F8);
else
/* data */
spiSend(0x0FA);
DELAY_US(40); // give the controller some time to process the data: 20 is bad, 30 is OK, 40 is safe
spiSend(rs ? 0x0FA : 0x0F8); // Send data or command
DELAY_US(40); // Give the controller some time: 20 is bad, 30 is OK, 40 is safe
}
spiSend(val & 0x0F0);
spiSend(val & 0xF0);
spiSend(val << 4);
}
@@ -104,8 +97,8 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
u8g_SetPIOutput(u8g, U8G_PI_CS);
u8g_Delay(5);
spiBegin();
spiInit(SPI_EIGHTH_SPEED); // ST7920 max speed is about 1.1 MHz
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
spiInit(SPI_EIGHTH_SPEED); // ST7920 max speed is about 1.1 MHz
u8g->pin_list[U8G_PI_A0_STATE] = 0; // initial RS state: command mode
break;
case U8G_COM_MSG_STOP:
@@ -115,12 +108,12 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
case U8G_COM_MSG_ADDRESS: // Define cmd (arg_val = 0) or data mode (arg_val = 1)
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
break;
case U8G_COM_MSG_CHIP_SELECT:
u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); // Note: the ST7920 has an active high chip-select
break;
case U8G_COM_MSG_WRITE_BYTE: