From 5f5f76956f11c7c58278fd449f6ad85e07cd6e10 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 22 Sep 2020 19:58:06 -0500 Subject: [PATCH] Fix up tests, warnings --- Marlin/src/gcode/calibrate/M48.cpp | 4 ++-- Marlin/src/lcd/extui/ui_api.cpp | 2 +- buildroot/tests/teensy41-tests | 13 +++++++------ platformio.ini | 2 +- 4 files changed, 11 insertions(+), 10 deletions(-) diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp index aaf58eed1c..88273b46e4 100644 --- a/Marlin/src/gcode/calibrate/M48.cpp +++ b/Marlin/src/gcode/calibrate/M48.cpp @@ -192,8 +192,8 @@ void GcodeSuite::M48() { // Choose the next position as an offset to chosen test position const xy_pos_t noz_pos = test_position - probe.offset_xy; xy_pos_t next_pos = { - noz_pos.x + cos(RADIANS(angle)) * radius, - noz_pos.y + sin(RADIANS(angle)) * radius + noz_pos.x + float(cos(RADIANS(angle))) * radius, + noz_pos.y + float(sin(RADIANS(angle))) * radius }; #if ENABLED(DELTA) diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp index afc9c6692e..1270e3d649 100644 --- a/Marlin/src/lcd/extui/ui_api.cpp +++ b/Marlin/src/lcd/extui/ui_api.cpp @@ -705,7 +705,7 @@ namespace ExtUI { #if ENABLED(BABYSTEP_ZPROBE_OFFSET) // Make it so babystepping in Z adjusts the Z probe offset. - if (axis == Z && TERN1(HAS_MULTI_EXTRUDER, linked_nozzles || active_extruder == 0)) + if (axis == Z && TERN1(HAS_MULTI_EXTRUDER, (linked_nozzles || active_extruder == 0))) probe.offset.z += mm; #endif diff --git a/buildroot/tests/teensy41-tests b/buildroot/tests/teensy41-tests index 04baf029d9..8d32d131e9 100644 --- a/buildroot/tests/teensy41-tests +++ b/buildroot/tests/teensy41-tests @@ -19,14 +19,15 @@ opt_set EXTRUDERS 2 opt_set TEMP_SENSOR_0 1 opt_set TEMP_SENSOR_1 5 opt_set TEMP_SENSOR_BED 1 -opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \ - FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \ +opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \ + FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \ FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ - BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \ - PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \ + BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET \ + PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \ ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \ PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \ HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT +opt_add EXTUI_EXAMPLE opt_set I2C_SLAVE_ADDRESS 63 opt_set GRID_MAX_POINTS_X 16 exec_test $1 $2 "Teensy4.1 with many features" @@ -62,7 +63,7 @@ restore_configs opt_set MOTHERBOARD BOARD_TEENSY41 opt_set EXTRUDERS 2 opt_set TEMP_SENSOR_1 1 -opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER +opt_enable MAGNETIC_PARKING_EXTRUDER exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" # @@ -70,7 +71,7 @@ exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" # restore_configs opt_set MOTHERBOARD BOARD_TEENSY41 -opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL opt_set MIXING_STEPPERS 2 exec_test $1 $2 "Mixing Extruder" diff --git a/platformio.ini b/platformio.ini index c1b6f2c24d..c68daf2c71 100644 --- a/platformio.ini +++ b/platformio.ini @@ -207,7 +207,7 @@ HAS_L64XX = Arduino-L6470@0.8.0 NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 src_filter=+ MAX6675_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 -HAS_GRAPHICAL_LCD = U8glib-HAL@0.4.1 +HAS_GRAPHICAL_LCD = U8glib-HAL@~0.4.1 src_filter=+ USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0 USES_LIQUIDTWI2 = LiquidTWI2@1.2.7