Refine EEPROM types / flags (#17772)

Marlin/src/HAL/DUE/HAL.h

@@ -30,6 +30,7 @@
 #define CPU_32_BIT
 
 #include "../shared/Marduino.h"
+#include "../shared/eeprom_if.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
@@ -130,14 +131,6 @@ void sei();                     // Enable interrupts
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason
 
-//
-// EEPROM
-//
-void eeprom_write_byte(uint8_t *pos, unsigned char value);
-uint8_t eeprom_read_byte(uint8_t *pos);
-void eeprom_read_block (void *__dst, const void *__src, size_t __n);
-void eeprom_update_block (const void *__src, void *__dst, size_t __n);
-
 //
 // ADC
 //

Marlin/src/HAL/DUE/eeprom_flash.cpp

@@ -22,25 +22,26 @@
  */
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS)
+#if ENABLED(FLASH_EEPROM_EMULATION)
 
 #include "../../inc/MarlinConfig.h"
+
+#include "../shared/eeprom_if.h"
 #include "../shared/eeprom_api.h"
 
-#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
+#if !defined(E2END)
   #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
 #endif
 
 extern void eeprom_flush();
 
-bool PersistentStore::access_start() { return true; }
+size_t PersistentStore::capacity()    { return E2END + 1; }
+bool PersistentStore::access_start()  { return true; }
 
 bool PersistentStore::access_finish() {
-  #if ENABLED(FLASH_EEPROM_EMULATION)
-    eeprom_flush();
-  #endif
+  eeprom_flush();
   return true;
 }
 
@@ -76,7 +77,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   return false;
 }
 
-size_t PersistentStore::capacity() { return E2END + 1; }
-
 #endif // EEPROM_SETTINGS
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/eeprom_if_flash.cpp

@@ -57,6 +57,7 @@
 #if ENABLED(FLASH_EEPROM_EMULATION)
 
 #include "../shared/Marduino.h"
+#include "../shared/eeprom_if.h"
 #include "../shared/eeprom_api.h"
 
 #define EEPROMSize     4096

Marlin/src/HAL/DUE/eeprom_wired.cpp

@@ -0,0 +1,69 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if USE_WIRED_EEPROM
+
+#include "../shared/eeprom_if.h"
+#include "../shared/eeprom_api.h"
+
+size_t PersistentStore::capacity()    { return E2END + 1; }
+bool PersistentStore::access_start()  { return true; }
+bool PersistentStore::access_finish() { return true; }
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t v = *value;
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
+      eeprom_write_byte(p, v);
+      delay(2);
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  };
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+#endif // USE_WIRED_EEPROM
+#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/inc/Conditionals_post.h

@@ -22,7 +22,7 @@
 #pragma once
 
 #if USE_FALLBACK_EEPROM
-  #undef SRAM_EEPROM_EMULATION
-  #undef SDCARD_EEPROM_EMULATION
   #define FLASH_EEPROM_EMULATION
+#elif EITHER(I2C_EEPROM, SPI_EEPROM)
+  #define USE_SHARED_EEPROM 1
 #endif