bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🐛 Fix IDEX + DISABLE_INACTIVE_EXTRUDER (#22925)

Browse Source
This commit is contained in:
InsanityAutomation
2021-10-12 19:40:56 -04:00
committed by Scott Lahteine
parent f3be03da20
commit 5b1ef638ee
2 changed files with 11 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
Marlin/src/module/planner.cpp
View File

@ -2207,23 +2207,23 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#if ENABLED(DISABLE_INACTIVE_EXTRUDER) // Enable only the selected extruder
// Count down all steppers that were recently moved
LOOP_L_N(i, E_STEPPERS)
if (g_uc_extruder_last_move[i]) g_uc_extruder_last_move[i]--;
// Switching Extruder uses one E stepper motor per two nozzles
#define E_STEPPER_INDEX(E) TERN(SWITCHING_EXTRUDER, (E) / 2, E)
// Enable all (i.e., both) E steppers for IDEX-style duplication, but only active E steppers for multi-nozzle (i.e., single wide X carriage) duplication
#define _IS_DUPE(N) TERN0(HAS_DUPLICATION_MODE, (extruder_duplication_enabled && TERN1(MULTI_NOZZLE_DUPLICATION, TEST(duplication_e_mask, N))))
#define ENABLE_ONE_E(N) do{ \
if (E_STEPPER_INDEX(extruder) == N) { \
stepper.ENABLE_EXTRUDER(N); \
g_uc_extruder_last_move[N] = (BLOCK_BUFFER_SIZE) * 2; \
if ((N) == 0 && TERN0(HAS_DUPLICATION_MODE, extruder_duplication_enabled)) \
stepper.ENABLE_EXTRUDER(1); \
} \
else if (!g_uc_extruder_last_move[N]) { \
stepper.DISABLE_EXTRUDER(N); \
if ((N) == 0 && TERN0(HAS_DUPLICATION_MODE, extruder_duplication_enabled)) \
stepper.DISABLE_EXTRUDER(1); \
if (N == E_STEPPER_INDEX(extruder) || _IS_DUPE(N)) { /* N is 'extruder', or N is duplicating */ \
stepper.ENABLE_EXTRUDER(N); /* Enable the relevant E stepper... */ \
g_uc_extruder_last_move[N] = (BLOCK_BUFFER_SIZE) * 2; /* ...and reset its counter */ \
} \
else if (!g_uc_extruder_last_move[N]) /* Counter expired since last E stepper enable */ \
stepper.DISABLE_EXTRUDER(N); /* Disable the E stepper */ \
}while(0);
#else