bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Move M350_M351 to cpp

Browse Source
This commit is contained in:
Scott Lahteine
2017-09-17 18:48:55 -05:00
parent 6e0503eab2
commit 59608086e6
4 changed files with 25 additions and 51 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
Marlin/src/gcode/control/M350.h
View File

@@ -1,33 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* M350: Set axis microstepping modes. S sets mode for all drivers.
*
* Warning: Steps-per-unit remains unchanged.
*/
void gcode_M350() {
if (parser.seen('S')) for (int i = 0; i <= 4; i++) stepper.microstep_mode(i, parser.value_byte());
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.microstep_mode(i, parser.value_byte());
if (parser.seen('B')) stepper.microstep_mode(4, parser.value_byte());
stepper.microstep_readings();
}

23
Marlin/src/gcode/control/M351.h → Marlin/src/gcode/control/M350_M351.cpp
View File

@@ -20,11 +20,30 @@
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_MICROSTEPS
#include "../gcode.h"
#include "../../module/stepper.h"
/**
* M350: Set axis microstepping modes. S sets mode for all drivers.
*
* Warning: Steps-per-unit remains unchanged.
*/
void GcodeSuite::M350() {
if (parser.seen('S')) for (uint8_t i = 0; i <= 4; i++) stepper.microstep_mode(i, parser.value_byte());
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.microstep_mode(i, parser.value_byte());
if (parser.seen('B')) stepper.microstep_mode(4, parser.value_byte());
stepper.microstep_readings();
}
/**
* M351: Toggle MS1 MS2 pins directly with axis codes X Y Z E B
* S# determines MS1 or MS2, X# sets the pin high/low.
*/
void gcode_M351() {
void GcodeSuite::M351() {
if (parser.seenval('S')) switch (parser.value_byte()) {
case 1:
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1);
@@ -37,3 +56,5 @@ void gcode_M351() {
}
stepper.microstep_readings();
}
#endif // HAS_MICROSTEPS