bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Rename LCD conditionals (#19533)

Browse Source
This commit is contained in:
Scott Lahteine 2020-09-28 01:13:27 -05:00
parent ac900b17e0
commit 58deab1915
138 changed files with 353 additions and 333 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/Configuration_adv.h
View File

@ -1106,18 +1106,18 @@
#define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
#endif
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && (HAS_GRAPHICAL_LCD || HAS_CHARACTER_LCD)
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && (HAS_MARLINUI_U8GLIB || HAS_MARLINUI_HD44780)
//#define SHOW_REMAINING_TIME // Display estimated time to completion
#if ENABLED(SHOW_REMAINING_TIME)
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
#endif
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
#endif
#if HAS_CHARACTER_LCD
#if HAS_MARLINUI_HD44780
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
@ -1328,7 +1328,7 @@
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.
*/
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
@ -1398,7 +1398,7 @@
//#define MARLIN_SNAKE
//#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
//
// Additional options for DGUS / DWIN displays

4
Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "../shared/Marduino.h"
#include "../shared/Delay.h"
@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // ARDUINO_ARCH_SAM

4
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
View File

@ -59,7 +59,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
@ -145,6 +145,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // __SAM3X8E__

4
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
#undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz
@ -144,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
return 1;
}
#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
#endif // ARDUINO_ARCH_SAM

4
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "../../shared/Delay.h"
@ -108,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
}
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // ARDUINO_ARCH_SAM

2
Marlin/src/HAL/LINUX/spi_pins.h
View File

@ -24,7 +24,7 @@
#include "../../core/macros.h"
#include "../../inc/MarlinConfigPre.h"
#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use

2
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View File

@ -113,7 +113,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#define _IS_RX1_1 IS_RX1
#if IS_TX1(TMC_SW_SCK)
#error "Serial port pins (1) conflict with other pins!"
#elif HAS_SPI_LCD
#elif HAS_WIRED_LCD
#if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
#error "Serial port pins (1) conflict with Encoder Buttons!"
#elif ANY_TX(1, SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \

2
Marlin/src/HAL/LPC1768/spi_pins.h
View File

@ -23,7 +23,7 @@
#include "../../core/macros.h"
#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
#include "../../shared/HAL_SPI.h"
@ -124,6 +124,6 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // TARGET_LPC1768

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
View File

@ -77,7 +77,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
@ -193,6 +193,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // TARGET_LPC1768

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
#include "../../shared/HAL_SPI.h"
@ -133,6 +133,6 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // TARGET_LPC1768

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
#include <SoftwareSPI.h>
@ -203,5 +203,5 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
#endif // TARGET_LPC1768

4
Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
View File

@ -20,7 +20,7 @@
#include "../../../inc/MarlinConfig.h"
#if BOTH(HAS_GRAPHICAL_LCD, FORCE_SOFT_SPI)
#if BOTH(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
#include "../HAL.h"
#include <U8glib.h>
@ -161,5 +161,5 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // STM32F1

2
Marlin/src/HAL/shared/HAL_ST7920.h
View File

@ -27,7 +27,7 @@
* (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate.
*/
#if BOTH(HAS_GRAPHICAL_LCD, LIGHTWEIGHT_UI)
#if BOTH(HAS_MARLINUI_U8GLIB, LIGHTWEIGHT_UI)
void ST7920_cs();
void ST7920_ncs();
void ST7920_set_cmd();

2
Marlin/src/MarlinCore.cpp
View File

@ -1072,7 +1072,7 @@ void setup() {
DWIN_UpdateLCD(); // Show bootscreen (first image)
#else
SETUP_RUN(ui.init());
#if HAS_SPI_LCD && ENABLED(SHOW_BOOTSCREEN)
#if HAS_WIRED_LCD && ENABLED(SHOW_BOOTSCREEN)
SETUP_RUN(ui.show_bootscreen());
#endif
SETUP_RUN(ui.reset_status()); // Load welcome message early. (Retained if no errors exist.)

2
Marlin/src/core/language.h
View File

@ -303,7 +303,7 @@
#define LCD_STR_C STR_C
#define LCD_STR_E STR_E
#if HAS_CHARACTER_LCD
#if HAS_MARLINUI_HD44780
// Custom characters defined in the first 8 characters of the LCD
#define LCD_STR_BEDTEMP "\x00" // Print only as a char. This will have 'unexpected' results when used in a string!

4
Marlin/src/feature/power_monitor.cpp
View File

@ -44,7 +44,7 @@ uint8_t PowerMonitor::display_item;
PowerMonitor power_monitor; // Single instance - this calls the constructor
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#if ENABLED(POWER_MONITOR_CURRENT)
void PowerMonitor::draw_current() {
@ -70,6 +70,6 @@ PowerMonitor power_monitor; // Single instance - this calls the constructor
}
#endif
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // HAS_POWER_MONITOR

4
Marlin/src/feature/power_monitor.h
View File

@ -88,8 +88,8 @@ public:
FORCE_INLINE static float getPower() { return getAmps() * getVolts(); }
#endif
#if HAS_SPI_LCD
#if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI)
#if HAS_WIRED_LCD
#if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI)
FORCE_INLINE static bool display_enabled() { return flags != 0x00; }
#endif
#if ENABLED(POWER_MONITOR_CURRENT)

8
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -359,7 +359,7 @@ inline bool turn_on_heaters() {
#if HAS_HEATED_BED
if (g26_bed_temp > 25) {
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99);
ui.quick_feedback();
TERN_(HAS_LCD_MENU, ui.capture());
@ -378,7 +378,7 @@ inline bool turn_on_heaters() {
#endif // HAS_HEATED_BED
// Start heating the active nozzle
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99);
ui.quick_feedback();
#endif
@ -391,7 +391,7 @@ inline bool turn_on_heaters() {
#endif
)) return G26_ERR;
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
ui.reset_status();
ui.quick_feedback();
#endif
@ -446,7 +446,7 @@ inline bool prime_nozzle() {
else
#endif
{
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99);
ui.quick_feedback();
#endif

4
Marlin/src/gcode/calibrate/M48.cpp
View File

@ -144,7 +144,7 @@ void GcodeSuite::M48() {
float sample_sum = 0.0;
LOOP_L_N(n, n_samples) {
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
// Display M48 progress in the status bar
ui.status_printf_P(0, PSTR(S_FMT ": %d/%d"), GET_TEXT(MSG_M48_POINT), int(n + 1), int(n_samples));
#endif
@ -258,7 +258,7 @@ void GcodeSuite::M48() {
SERIAL_ECHOLNPGM("Finished!");
dev_report(verbose_level > 0, mean, sigma, min, max, true);
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
// Display M48 results in the status bar
char sigma_str[8];
ui.status_printf_P(0, PSTR(S_FMT ": %s"), GET_TEXT(MSG_M48_DEVIATION), dtostrf(sigma, 2, 6, sigma_str));

2
Marlin/src/gcode/feature/power_monitor/M430.cpp
View File

@ -38,7 +38,7 @@
*/
void GcodeSuite::M430() {
bool do_report = true;
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(POWER_MONITOR_CURRENT)
if (parser.seen('I')) { power_monitor.set_current_display(parser.value_bool()); do_report = false; }
#endif

8
Marlin/src/inc/Conditionals_LCD.h
View File

@ -456,11 +456,11 @@
#endif
#if ENABLED(ULTRA_LCD)
#define HAS_SPI_LCD 1
#define HAS_WIRED_LCD 1
#if ENABLED(DOGLCD)
#define HAS_GRAPHICAL_LCD 1
#define HAS_MARLINUI_U8GLIB 1
#elif DISABLED(HAS_GRAPHICAL_TFT)
#define HAS_CHARACTER_LCD 1
#define HAS_MARLINUI_HD44780 1
#endif
#endif
@ -471,7 +471,7 @@
#define HAS_ADC_BUTTONS 1
#endif
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#ifndef LCD_PIXEL_WIDTH
#define LCD_PIXEL_WIDTH 128
#endif

10
Marlin/src/inc/Conditionals_post.h
View File

@ -2455,7 +2455,7 @@
*/
#if PIN_EXISTS(BEEPER) || EITHER(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)
#define HAS_BUZZER 1
#if NONE(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)
#if PIN_EXISTS(BEEPER)
#define USE_BEEPER 1
#endif
#endif
@ -2483,7 +2483,7 @@
/**
* Make sure DOGLCD_SCK and DOGLCD_MOSI are defined.
*/
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#ifndef DOGLCD_SCK
#define DOGLCD_SCK SCK_PIN
#endif
@ -2604,17 +2604,17 @@
#define HAS_FOLDER_SORTING 1
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
// Get LCD character width/height, which may be overridden by pins, configs, etc.
#ifndef LCD_WIDTH
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#define LCD_WIDTH 21
#else
#define LCD_WIDTH TERN(ULTIPANEL, 20, 16)
#endif
#endif
#ifndef LCD_HEIGHT
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#define LCD_HEIGHT 5
#else
#define LCD_HEIGHT TERN(ULTIPANEL, 4, 2)

20
Marlin/src/inc/SanityCheck.h
View File

@ -680,7 +680,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* LCD Info Screen Style
*/
#if LCD_INFO_SCREEN_STYLE > 0
#if HAS_GRAPHICAL_LCD || LCD_WIDTH < 20 || LCD_HEIGHT < 4
#if HAS_MARLINUI_U8GLIB || LCD_WIDTH < 20 || LCD_HEIGHT < 4
#error "Alternative LCD_INFO_SCREEN_STYLE requires 20x4 Character LCD."
#elif LCD_INFO_SCREEN_STYLE > 1
#error "LCD_INFO_SCREEN_STYLE only has options 0 and 1 at this time."
@ -693,16 +693,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#if ENABLED(LCD_PROGRESS_BAR)
#if NONE(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
#error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY."
#elif !HAS_CHARACTER_LCD
#elif !HAS_MARLINUI_HD44780
#error "LCD_PROGRESS_BAR requires a character LCD."
#elif HAS_GRAPHICAL_LCD
#elif HAS_MARLINUI_U8GLIB
#error "LCD_PROGRESS_BAR does not apply to graphical displays."
#elif ENABLED(FILAMENT_LCD_DISPLAY)
#error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
#elif PROGRESS_MSG_EXPIRE < 0
#error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
#endif
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_GRAPHICAL_LCD, HAS_GRAPHICAL_TFT, HAS_CHARACTER_LCD, EXTENSIBLE_UI)
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI)
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI."
#endif
@ -713,9 +713,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* Custom Boot and Status screens
*/
#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_GRAPHICAL_LCD, TOUCH_UI_FTDI_EVE)
#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE)
#error "SHOW_CUSTOM_BOOTSCREEN requires Graphical LCD or TOUCH_UI_FTDI_EVE."
#elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_GRAPHICAL_LCD
#elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_MARLINUI_U8GLIB
#error "CUSTOM_STATUS_SCREEN_IMAGE requires a Graphical LCD."
#endif
@ -782,7 +782,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
#elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
#error "BABYSTEP_ZPROBE_OFFSET requires a probe."
#elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_GRAPHICAL_LCD
#elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_MARLINUI_U8GLIB
#error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD."
#elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET)
#error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
@ -1143,7 +1143,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* Required LCD language
*/
#if HAS_CHARACTER_LCD && !defined(DISPLAY_CHARSET_HD44780)
#if HAS_MARLINUI_HD44780 && !defined(DISPLAY_CHARSET_HD44780)
#error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
#endif
@ -1465,7 +1465,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#endif
#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_GRAPHICAL_LCD)
#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_MARLINUI_U8GLIB)
#error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD."
#endif
@ -3081,7 +3081,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#undef _PIN_CONFLICT
#endif
#if !HAS_GRAPHICAL_LCD
#if !HAS_MARLINUI_U8GLIB
#if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
#error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD."
#endif

4
Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp
View File

@ -14,7 +14,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_CHARACTER_LCD
#if HAS_MARLINUI_HD44780
#include "../ultralcd.h"
#include "../../MarlinCore.h"
@ -1119,4 +1119,4 @@ int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) {
#endif // DEBUG_LCDPRINT
#endif // HAS_CHARACTER_LCD
#endif // HAS_MARLINUI_HD44780

4
Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp
View File

@ -22,7 +22,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_CHARACTER_LCD
#if HAS_MARLINUI_HD44780
/**
* ultralcd_HD44780.cpp
@ -1517,4 +1517,4 @@ void MarlinUI::draw_status_screen() {
#endif // HAS_LCD_MENU
#endif // HAS_CHARACTER_LCD
#endif // HAS_MARLINUI_HD44780

4
Marlin/src/lcd/dogm/lcdprint_u8g.cpp
View File

@ -9,7 +9,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "ultralcd_DOGM.h"
@ -53,4 +53,4 @@ int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) {
return ret;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB

4
Marlin/src/lcd/dogm/status_screen_DOGM.cpp
View File

@ -27,7 +27,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI)
#if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI)
#include "dogm_Statusscreen.h"
#include "ultralcd_DOGM.h"
@ -913,4 +913,4 @@ void MarlinUI::draw_status_message(const bool blink) {
#endif
}
#endif // HAS_GRAPHICAL_LCD && !LIGHTWEIGHT_UI
#endif // HAS_MARLINUI_U8GLIB && !LIGHTWEIGHT_UI

4
Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp
View File

@ -67,7 +67,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "HAL_LCD_com_defines.h"
@ -300,4 +300,4 @@ uint8_t u8g_WriteEscSeqP_2_wire(u8g_t *u8g, u8g_dev_t *dev, const uint8_t *esc_s
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB

4
Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp
View File

@ -55,7 +55,7 @@
#include "../../inc/MarlinConfig.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
#include "HAL_LCD_com_defines.h"
@ -233,4 +233,4 @@ u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_sw_spi = { u8g_dev_st7565_64128n_HAL_2x_f
U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_HW_SPI_FN);
u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_hw_spi = { u8g_dev_st7565_64128n_HAL_2x_fn, &u8g_dev_st7565_64128n_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN };
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB

4
Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp
View File

@ -55,7 +55,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "HAL_LCD_com_defines.h"
@ -205,4 +205,4 @@ u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_hw_spi = { u8g_dev_st7920_128x64_HAL_4x_f
u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = { u8g_dev_st7920_128x64_HAL_4x_fn, &u8g_dev_st7920_128x64_HAL_4x_pb, U8G_COM_ST7920_HAL_SW_SPI };
#endif
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB

4
Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
View File

@ -56,7 +56,7 @@
#include "../../inc/MarlinConfig.h"
#if HAS_GRAPHICAL_LCD && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT))
#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT))
#include "HAL_LCD_com_defines.h"
#include "ultralcd_DOGM.h"
@ -813,4 +813,4 @@ uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_p
U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_TFT_FN);
#endif // HAS_GRAPHICAL_LCD && FSMC_CS
#endif // HAS_MARLINUI_U8GLIB && FSMC_CS

4
Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
View File

@ -55,7 +55,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "HAL_LCD_com_defines.h"
@ -210,4 +210,4 @@ u8g_pb_t u8g_dev_uc1701_mini12864_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u
u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN };
u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_hw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN };
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB

4
Marlin/src/lcd/dogm/u8g_fontutf8.cpp
View File

@ -9,7 +9,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <string.h>
#include "../fontutils.h"
@ -312,4 +312,4 @@ int uxg_GetUtf8StrPixelWidthP(u8g_t *pu8g, PGM_P utf8_msg) {
return data.adv;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB

4
Marlin/src/lcd/dogm/ultralcd_DOGM.cpp
View File

@ -37,7 +37,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "ultralcd_DOGM.h"
#include "u8g_fontutf8.h"
@ -687,4 +687,4 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
#endif // HAS_LCD_MENU
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB

2
Marlin/src/lcd/fontutils.cpp
View File

@ -9,7 +9,7 @@
#include "../inc/MarlinConfig.h"
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#include "ultralcd.h"
#include "../MarlinCore.h"
#endif

4
Marlin/src/lcd/lcdprint.cpp
View File

@ -26,7 +26,7 @@
#include "../inc/MarlinConfigPre.h"
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#include "lcdprint.h"
@ -73,4 +73,4 @@ lcd_uint_t lcd_put_u8str_ind_P(PGM_P const pstr, const int8_t ind, PGM_P const i
return n;
}
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

2
Marlin/src/lcd/lcdprint.h
View File

@ -34,7 +34,7 @@
#include "../inc/MarlinConfig.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "dogm/u8g_fontutf8.h"
typedef u8g_uint_t lcd_uint_t;

4
Marlin/src/lcd/menu/menu.cpp
View File

@ -213,14 +213,14 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co
clear_lcd();
// Re-initialize custom characters that may be re-used
#if HAS_CHARACTER_LCD
#if HAS_MARLINUI_HD44780
if (TERN1(AUTO_BED_LEVELING_UBL, !ubl.lcd_map_control))
set_custom_characters(on_status_screen() ? CHARSET_INFO : CHARSET_MENU);
#endif
refresh(LCDVIEW_CALL_REDRAW_NEXT);
screen_changed = true;
TERN_(HAS_GRAPHICAL_LCD, drawing_screen = false);
TERN_(HAS_MARLINUI_U8GLIB, drawing_screen = false);
TERN_(HAS_LCD_MENU, encoder_direction_normal());

4
Marlin/src/lcd/menu/menu.h
View File

@ -39,7 +39,7 @@ typedef void (*selectFunc_t)();
#define SS_INVERT 0x02
#define SS_DEFAULT SS_CENTER
#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
void _lcd_zoffset_overlay_gfx(const float zvalue);
#endif
@ -215,7 +215,7 @@ void _lcd_draw_homing();
void line_to_z(const float &z);
#endif
#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
void _lcd_zoffset_overlay_gfx(const float zvalue);
#endif

4
Marlin/src/lcd/menu/menu_configuration.cpp
View File

@ -60,7 +60,9 @@ void menu_advanced_settings();
static int8_t bar_percent = 0;
if (ui.use_click()) {
ui.goto_previous_screen();
#if HAS_MARLINUI_HD44780
ui.set_custom_characters(CHARSET_MENU);
#endif
return;
}
bar_percent += (int8_t)ui.encoderPosition;
@ -73,7 +75,9 @@ void menu_advanced_settings();
void _progress_bar_test() {
ui.goto_screen(progress_bar_test);
#if HAS_MARLINUI_HD44780
ui.set_custom_characters(CHARSET_INFO);
#endif
}
#endif // LCD_PROGRESS_BAR_TEST

4
Marlin/src/lcd/menu/menu_media.cpp
View File

@ -99,7 +99,7 @@ class MenuItem_sdfolder : public MenuItem_sdbase {
encoderTopLine = 0;
ui.encoderPosition = 2 * (ENCODER_STEPS_PER_MENU_ITEM);
ui.screen_changed = true;
TERN_(HAS_GRAPHICAL_LCD, ui.drawing_screen = false);
TERN_(HAS_MARLINUI_U8GLIB, ui.drawing_screen = false);
ui.refresh();
}
};
@ -107,7 +107,7 @@ class MenuItem_sdfolder : public MenuItem_sdbase {
void menu_media() {
ui.encoder_direction_menus();
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
static uint16_t fileCnt;
if (ui.first_page) fileCnt = card.get_num_Files();
#else

2
Marlin/src/lcd/menu/menu_motion.cpp
View File

@ -205,7 +205,7 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int
#if DISABLED(HAS_GRAPHICAL_TFT)
extern const char NUL_STR[];
SUBMENU_P(NUL_STR, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); });
MENU_ITEM_ADDON_START(0 + ENABLED(HAS_CHARACTER_LCD));
MENU_ITEM_ADDON_START(0 + ENABLED(HAS_MARLINUI_HD44780));
lcd_put_u8str(tmp);
MENU_ITEM_ADDON_END();
#else

8
Marlin/src/lcd/menu/menu_tune.cpp
View File

@ -46,7 +46,7 @@
#include "../../feature/babystep.h"
#include "../lcdprint.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "../dogm/ultralcd_DOGM.h"
#endif
@ -68,10 +68,10 @@
const float spm = planner.steps_to_mm[axis];
MenuEditItemBase::draw_edit_screen(msg, BABYSTEP_TO_STR(spm * babystep.accum));
#if ENABLED(BABYSTEP_DISPLAY_TOTAL)
const bool in_view = TERN1(HAS_GRAPHICAL_LCD, PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1));
const bool in_view = TERN1(HAS_MARLINUI_U8GLIB, PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1));
if (in_view) {
TERN_(HAS_GRAPHICAL_LCD, ui.set_font(FONT_MENU));
lcd_moveto(0, TERN(HAS_GRAPHICAL_LCD, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT, LCD_HEIGHT - 1));
TERN_(HAS_MARLINUI_U8GLIB, ui.set_font(FONT_MENU));
lcd_moveto(0, TERN(HAS_MARLINUI_U8GLIB, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT, LCD_HEIGHT - 1));
lcd_put_u8str_P(GET_TEXT(MSG_BABYSTEP_TOTAL));
lcd_put_wchar(':');
lcd_put_u8str(BABYSTEP_TO_STR(spm * babystep.axis_total[BS_TOTAL_IND(axis)]));

2
Marlin/src/lcd/touch/touch_buttons.cpp
View File

@ -74,7 +74,7 @@ TouchButtons touch;
void TouchButtons::init() { touchIO.Init(); }
uint8_t TouchButtons::read_buttons() {
#ifdef HAS_SPI_LCD
#ifdef HAS_WIRED_LCD
int16_t x, y;
if (!touchIO.getRawPoint(&x, &y)) return 0;

28
Marlin/src/lcd/ultralcd.cpp
View File

@ -51,7 +51,7 @@ MarlinUI ui;
constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(STATUS_MESSAGE_SCROLLING)
uint8_t MarlinUI::status_scroll_offset; // = 0
constexpr uint8_t MAX_MESSAGE_LENGTH = _MAX(LONG_FILENAME_LENGTH, MAX_LANG_CHARSIZE * 2 * (LCD_WIDTH));
@ -62,7 +62,7 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
constexpr uint8_t MAX_MESSAGE_LENGTH = 63;
#endif
#if EITHER(HAS_SPI_LCD, EXTENSIBLE_UI)
#if EITHER(HAS_WIRED_LCD, EXTENSIBLE_UI)
uint8_t MarlinUI::alert_level; // = 0
char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1];
#endif
@ -114,9 +114,9 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
}
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "dogm/ultralcd_DOGM.h"
#endif
@ -167,7 +167,7 @@ uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed
millis_t MarlinUI::next_button_update_ms; // = 0
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
bool MarlinUI::drawing_screen, MarlinUI::first_page; // = false
#endif
@ -372,7 +372,7 @@ void MarlinUI::init() {
#endif // HAS_SHIFT_ENCODER
#if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS
#if BOTH(HAS_ENCODER_ACTION, HAS_SLOW_BUTTONS)
slow_buttons = 0;
#endif
@ -873,7 +873,7 @@ void MarlinUI::update() {
#endif // HAS_LCD_MENU
if (ELAPSED(ms, next_lcd_update_ms) || TERN0(HAS_GRAPHICAL_LCD, drawing_screen)) {
if (ELAPSED(ms, next_lcd_update_ms) || TERN0(HAS_MARLINUI_U8GLIB, drawing_screen)) {
next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL;
@ -971,7 +971,7 @@ void MarlinUI::update() {
// This runs every ~100ms when idling often enough.
// Instead of tracking changes just redraw the Status Screen once per second.
if (on_status_screen() && !lcd_status_update_delay--) {
lcd_status_update_delay = TERN(HAS_GRAPHICAL_LCD, 12, 9);
lcd_status_update_delay = TERN(HAS_MARLINUI_U8GLIB, 12, 9);
if (max_display_update_time) max_display_update_time--; // Be sure never go to a very big number
refresh(LCDVIEW_REDRAW_NOW);
}
@ -1010,7 +1010,7 @@ void MarlinUI::update() {
TERN_(HAS_ADC_BUTTONS, keypad_buttons = 0);
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#if ENABLED(LIGHTWEIGHT_UI)
const bool in_status = on_status_screen(),
@ -1294,7 +1294,7 @@ void MarlinUI::update() {
#endif // HAS_ENCODER_ACTION
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
#if HAS_DISPLAY
@ -1342,7 +1342,7 @@ void MarlinUI::update() {
next_filament_display = ms + 5000UL; // Show status message for 5s
#endif
#if BOTH(HAS_SPI_LCD, STATUS_MESSAGE_SCROLLING)
#if BOTH(HAS_WIRED_LCD, STATUS_MESSAGE_SCROLLING)
status_scroll_offset = 0;
#endif
@ -1501,7 +1501,7 @@ void MarlinUI::update() {
set_status_P(print_paused);
#if ENABLED(PARK_HEAD_ON_PAUSE)
TERN_(HAS_SPI_LCD, lcd_pause_show_message(PAUSE_MESSAGE_PARKING, PAUSE_MODE_PAUSE_PRINT)); // Show message immediately to let user know about pause in progress
TERN_(HAS_WIRED_LCD, lcd_pause_show_message(PAUSE_MESSAGE_PARKING, PAUSE_MODE_PAUSE_PRINT)); // Show message immediately to let user know about pause in progress
queue.inject_P(PSTR("M25 P\nM24"));
#elif ENABLED(SDSUPPORT)
queue.inject_P(PSTR("M25"));
@ -1610,11 +1610,11 @@ void MarlinUI::update() {
refresh();
#if HAS_SPI_LCD || defined(LED_BACKLIGHT_TIMEOUT)
#if HAS_WIRED_LCD || defined(LED_BACKLIGHT_TIMEOUT)
const millis_t ms = millis();
#endif
TERN_(HAS_SPI_LCD, next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL); // Delay LCD update for SD activity
TERN_(HAS_WIRED_LCD, next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL); // Delay LCD update for SD activity
#ifdef LED_BACKLIGHT_TIMEOUT
leds.reset_timeout(ms);

22
Marlin/src/lcd/ultralcd.h
View File

@ -40,7 +40,7 @@
#if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT)
#define HAS_DIGITAL_BUTTONS 1
#endif
#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL)))
#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_WIRED_LCD && DISABLED(NEWPANEL)))
#define HAS_SHIFT_ENCODER 1
#endif
@ -53,7 +53,7 @@
#define MULTI_MANUAL 1
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#include "../MarlinCore.h"
@ -104,7 +104,7 @@
#endif // HAS_LCD_MENU
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
// REPRAPWORLD_KEYPAD (and ADC_KEYPAD)
#if ENABLED(REPRAPWORLD_KEYPAD)
@ -231,7 +231,7 @@
#endif
#endif
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
enum MarlinFont : uint8_t {
FONT_STATUSMENU = 1,
FONT_EDIT,
@ -316,11 +316,11 @@ public:
static void refresh();
#else
FORCE_INLINE static void refresh() {
TERN_(HAS_SPI_LCD, refresh(LCDVIEW_CLEAR_CALL_REDRAW));
TERN_(HAS_WIRED_LCD, refresh(LCDVIEW_CLEAR_CALL_REDRAW));
}
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
static bool detected();
static void init_lcd();
#else
@ -381,7 +381,7 @@ public:
static void pause_print();
static void resume_print();
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
static millis_t next_button_update_ms;
@ -403,7 +403,7 @@ public:
static void show_bootscreen();
#endif
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
static void set_font(const MarlinFont font_nr);
@ -458,7 +458,7 @@ public:
#endif
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
static bool drawing_screen, first_page;
#else
static constexpr bool drawing_screen = false, first_page = true;
@ -577,7 +577,7 @@ public:
static void draw_select_screen_prompt(PGM_P const pref, const char * const string=nullptr, PGM_P const suff=nullptr);
#elif HAS_SPI_LCD
#elif HAS_WIRED_LCD
static constexpr bool lcd_clicked = false;
static constexpr bool on_status_screen() { return true; }
@ -692,7 +692,7 @@ private:
static void finish_status(const bool persist);
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if HAS_LCD_MENU && LCD_TIMEOUT_TO_STATUS > 0
static bool defer_return_to_status;
#else

4
Marlin/src/module/endstops.cpp
View File

@ -351,7 +351,7 @@ void Endstops::event_handler() {
if (hit_state == prev_hit_state) return;
prev_hit_state = hit_state;
if (hit_state) {
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' ';
#define _SET_STOP_CHAR(A,C) (chr## A = C)
#else
@ -382,7 +382,7 @@ void Endstops::event_handler() {
#endif
SERIAL_EOL();
TERN_(HAS_SPI_LCD, ui.status_printf_P(0, PSTR(S_FMT " %c %c %c %c"), GET_TEXT(MSG_LCD_ENDSTOPS), chrX, chrY, chrZ, chrP));
TERN_(HAS_WIRED_LCD, ui.status_printf_P(0, PSTR(S_FMT " %c %c %c %c"), GET_TEXT(MSG_LCD_ENDSTOPS), chrX, chrY, chrZ, chrP));
#if BOTH(SD_ABORT_ON_ENDSTOP_HIT, SDSUPPORT)
if (planner.abort_on_endstop_hit) {

16
Marlin/src/module/planner.cpp
View File

@ -234,7 +234,7 @@ float Planner::previous_nominal_speed_sqr;
xyze_pos_t Planner::position_cart;
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
volatile uint32_t Planner::block_buffer_runtime_us = 0;
#endif
@ -747,7 +747,7 @@ block_t* Planner::get_current_block() {
if (TEST(block->flag, BLOCK_BIT_RECALCULATE)) return nullptr;
// We can't be sure how long an active block will take, so don't count it.
TERN_(HAS_SPI_LCD, block_buffer_runtime_us -= block->segment_time_us);
TERN_(HAS_WIRED_LCD, block_buffer_runtime_us -= block->segment_time_us);
// As this block is busy, advance the nonbusy block pointer
block_buffer_nonbusy = next_block_index(block_buffer_tail);
@ -761,7 +761,7 @@ block_t* Planner::get_current_block() {
}
// The queue became empty
TERN_(HAS_SPI_LCD, clear_block_buffer_runtime()); // paranoia. Buffer is empty now - so reset accumulated time to zero.
TERN_(HAS_WIRED_LCD, clear_block_buffer_runtime()); // paranoia. Buffer is empty now - so reset accumulated time to zero.
return nullptr;
}
@ -1578,7 +1578,7 @@ void Planner::quick_stop() {
// forced to empty, there's no risk the ISR will touch this.
delay_before_delivering = BLOCK_DELAY_FOR_1ST_MOVE;
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
// Clear the accumulated runtime
clear_block_buffer_runtime();
#endif
@ -2081,7 +2081,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
const uint8_t moves_queued = nonbusy_movesplanned();
// Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill
#if EITHER(SLOWDOWN, HAS_SPI_LCD) || defined(XY_FREQUENCY_LIMIT)
#if EITHER(SLOWDOWN, HAS_WIRED_LCD) || defined(XY_FREQUENCY_LIMIT)
// Segment time im micro seconds
int32_t segment_time_us = LROUND(1000000.0f / inverse_secs);
#endif
@ -2096,14 +2096,14 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
// Buffer is draining so add extra time. The amount of time added increases if the buffer is still emptied more.
const int32_t nst = segment_time_us + LROUND(2 * time_diff / moves_queued);
inverse_secs = 1000000.0f / nst;
#if defined(XY_FREQUENCY_LIMIT) || HAS_SPI_LCD
#if defined(XY_FREQUENCY_LIMIT) || HAS_WIRED_LCD
segment_time_us = nst;
#endif
}
}
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
// Protect the access to the position.
const bool was_enabled = stepper.suspend();
@ -3029,7 +3029,7 @@ void Planner::set_max_jerk(const AxisEnum axis, float targetValue) {
#endif
}
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
uint16_t Planner::block_buffer_runtime() {
#ifdef __AVR__

6
Marlin/src/module/planner.h
View File

@ -218,7 +218,7 @@ typedef struct block_t {
uint8_t valve_pressure, e_to_p_pressure;
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
uint32_t segment_time_us;
#endif
@ -438,7 +438,7 @@ class Planner {
static uint8_t g_uc_extruder_last_move[EXTRUDERS];
#endif
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
volatile static uint32_t block_buffer_runtime_us; // Theoretical block buffer runtime in µs
#endif
@ -871,7 +871,7 @@ class Planner {
block_buffer_tail = next_block_index(block_buffer_tail);
}
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
static uint16_t block_buffer_runtime();
static void clear_block_buffer_runtime();
#endif

4
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View File

@ -124,7 +124,7 @@
// LCDs and Controllers //
//////////////////////////
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#define LCD_PINS_RS 13
#define LCD_PINS_ENABLE 17
@ -152,7 +152,7 @@
#define BTN_EN2 12
#define BTN_ENC 14
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
// Hardware serial pins
// Add the following to Configuration.h or Configuration_adv.h to assign

4
Marlin/src/pins/linux/pins_RAMPS_LINUX.h
View File

@ -389,7 +389,7 @@
// LCDs and Controllers //
//////////////////////////
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
//
// LCD Display output pins
@ -632,4 +632,4 @@
#endif
#endif // NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

6
Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
View File

@ -126,7 +126,7 @@
* for the onboard SD card, and a chip select signal is not provided for the remote
* SD card.
*/
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN P1_31 // EXP1-1
@ -139,7 +139,7 @@
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD
#if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER)
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0"
#endif
@ -147,7 +147,7 @@
#error "SDSUPPORT is not supported by the BIQU B300 v1.0 when an LCD controller is used"
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
/**
* SD Card Reader

6
Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
View File

@ -97,7 +97,7 @@
* for the onboard SD card, and a chip select signal is not provided for the remote
* SD card.
*/
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN P1_31 // EXP1-1
@ -110,7 +110,7 @@
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD
#if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER)
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
#endif
@ -118,7 +118,7 @@
#error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used"
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
/**
* SD Card Reader

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h
View File

@ -65,7 +65,7 @@
* by redrawing the screen after SD card accesses.
*/
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BTN_EN1 P3_26
#define BTN_EN2 P3_25
#define BTN_ENC P2_11

4
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View File

@ -214,7 +214,7 @@
#define EXPA2_09_PIN P0_15
#define EXPA2_10_PIN P0_17
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(ANET_FULL_GRAPHICS_LCD)
@ -350,7 +350,7 @@
#endif // !CR10_STOCKDISPLAY
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// SD Support

6
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View File

@ -232,7 +232,7 @@
* ----- -----
* EXP2 EXP1
*/
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(ANET_FULL_GRAPHICS_LCD)
#define LCD_PINS_RS P1_23
@ -371,9 +371,9 @@
#endif // !FYSETC_MINI_12864
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
#if HAS_ADC_BUTTONS
#error "ADC BUTTONS do not work unmodifed on SKR 1.4, The ADC ports cannot take more than 3.3v."

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
View File

@ -92,7 +92,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#endif

2
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View File

@ -217,7 +217,7 @@
* that the garbage/lines are erased immediately after the SD card accesses are completed.
*/
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN P1_31 // EXP1.1
#define BTN_ENC P1_30 // EXP1.2
#define BTN_EN1 P3_26 // EXP2.5

5
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View File

@ -235,7 +235,8 @@
* ----- -----
* EXP1 EXP2
*/
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN P1_31
#define BTN_ENC P1_30
@ -321,7 +322,7 @@
#endif // !CR10_STOCKDISPLAY
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD

5
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View File

@ -326,7 +326,7 @@
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
#elif HAS_SPI_LCD
#elif HAS_WIRED_LCD
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
@ -372,6 +372,7 @@
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#else
#if ENABLED(FYSETC_MINI_12864)
@ -422,7 +423,7 @@
//#define LCD_SCREEN_ROT_270
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// Ethernet pins

4
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
View File

@ -109,7 +109,7 @@
//
// Display
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(CR10_STOCKDISPLAY)
@ -185,7 +185,7 @@
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// SD Support

4
Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
View File

@ -193,7 +193,7 @@
#define EXPA1_09_PIN P0_16
#define EXPA1_10_PIN P2_08
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(CR10_STOCKDISPLAY)
@ -238,7 +238,7 @@
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// SD Support

4
Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
View File

@ -141,7 +141,7 @@
// connector are shared with the onboard SD card, and Marlin does not support reading
// G-code files from the onboard SD card.
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN P0_27 // EXP2-7 - open drain
@ -160,7 +160,7 @@
#error "SDSUPPORT is not currently supported by the Cohesion3D boards"
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// Ethernet pins

4
Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
View File

@ -206,7 +206,7 @@
#define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
#endif
#elif HAS_SPI_LCD
#elif HAS_WIRED_LCD
#define BEEPER_PIN P1_31 // EXP1-1
//#define SD_DETECT_PIN P0_27 // EXP2-7
@ -222,7 +222,7 @@
#define KILL_PIN P2_11 // EXP2-10
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// SD Support

5
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
View File

@ -241,11 +241,12 @@
* ----- -----
* EXP1 EXP2
*/
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN P1_31
#define BTN_ENC P1_30
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS P1_00
#define BTN_EN1 P0_18
@ -327,7 +328,7 @@
#endif // !CR10_STOCKDISPLAY
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD

2
Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
View File

@ -109,7 +109,7 @@
#define STAT_LED_RED_PIN P1_19
#define STAT_LED_BLUE_PIN P1_20
#elif HAS_SPI_LCD
#elif HAS_WIRED_LCD
/*
The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either

2
Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
View File

@ -178,6 +178,6 @@
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define KILL_PIN P2_11
#elif HAS_SPI_LCD
#elif HAS_WIRED_LCD
#error "Only the CR10_STOCKDISPLAY is supported with TH3D EZBoard."
#endif

4
Marlin/src/pins/mega/pins_GT2560_REV_A.h
View File

@ -105,7 +105,7 @@
#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
#define KILL_PIN -1
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN 18
@ -148,4 +148,4 @@
#endif // !NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/mega/pins_HJC2560C_REV2.h
View File

@ -123,7 +123,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN 18
@ -170,4 +170,4 @@
#endif // !NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

2
Marlin/src/pins/mega/pins_INTAMSYS40.h
View File

@ -122,7 +122,7 @@
#define BEEPER_PIN 18
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 30
#define LCD_PINS_D4 14

4
Marlin/src/pins/mega/pins_MEGATRONICS_2.h
View File

@ -130,7 +130,7 @@
//
#define BEEPER_PIN 64
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
@ -152,4 +152,4 @@
#define SHIFT_EN 17
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h
View File

@ -212,7 +212,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
@ -260,7 +260,7 @@
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// SD Card

2
Marlin/src/pins/mega/pins_OVERLORD.h
View File

@ -119,7 +119,7 @@
//
// LCD / Controller
//
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
// OVERLORD OLED pins
#define LCD_PINS_RS 20
#define LCD_PINS_D5 21

2
Marlin/src/pins/mega/pins_PICA.h
View File

@ -137,7 +137,7 @@
//
#define BEEPER_PIN 29
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define LCD_PINS_RS 33
#define LCD_PINS_ENABLE 30
#define LCD_PINS_D4 35

2
Marlin/src/pins/mega/pins_SILVER_GATE.h
View File

@ -72,7 +72,7 @@
#define HEATER_BED_PIN 8
#define TEMP_BED_PIN 6
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920
#define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 20

4
Marlin/src/pins/pins.h
View File

@ -1227,7 +1227,7 @@
#define LCD_PINS_D4 -1
#endif
#if HAS_CHARACTER_LCD || TOUCH_UI_ULTIPANEL
#if HAS_MARLINUI_HD44780 || TOUCH_UI_ULTIPANEL
#ifndef LCD_PINS_D5
#define LCD_PINS_D5 -1
#endif
@ -1597,7 +1597,7 @@
#define Z4_MS3_PIN -1
#endif
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#if !defined(ST7920_DELAY_1) && defined(BOARD_ST7920_DELAY_1)
#define ST7920_DELAY_1 BOARD_ST7920_DELAY_1
#endif

4
Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
View File

@ -160,7 +160,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
#define KILL_PIN 32
@ -188,4 +188,4 @@
#define SD_DETECT_PIN 15
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/rambo/pins_EINSY_RETRO.h
View File

@ -166,7 +166,7 @@
//
// LCD / Controller
//
#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#define KILL_PIN 32
@ -196,4 +196,4 @@
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE

4
Marlin/src/pins/rambo/pins_MINIRAMBO.h
View File

@ -141,7 +141,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
#if !MB(MINIRAMBO_10A)
#define KILL_PIN 32
@ -189,4 +189,4 @@
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL

4
Marlin/src/pins/rambo/pins_RAMBO.h
View File

@ -183,7 +183,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
#define KILL_PIN 80
@ -249,4 +249,4 @@
#endif // !NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

2
Marlin/src/pins/ramps/pins_3DRAG.h
View File

@ -106,7 +106,7 @@
#define BEEPER_PIN 33
#endif // HAS_SPI_LCD && NEWPANEL
#endif // ULTRA_LCD && NEWPANEL
/**
* M3/M4/M5 - Spindle/Laser Control

2
Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h
View File

@ -87,7 +87,7 @@
//
// LCDs and Controllers
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(ZONESTAR_LCD)
#define LCD_PINS_RS 2
#define LCD_PINS_ENABLE 36

2
Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h
View File

@ -197,7 +197,7 @@
#define LCD_PINS_D7 29
#endif
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(200)
#endif

2
Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
View File

@ -261,7 +261,7 @@
#define NEOPIXEL_PIN 25
#endif
#elif HAS_GRAPHICAL_LCD
#elif HAS_MARLINUI_U8GLIB
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17

4
Marlin/src/pins/ramps/pins_K8800.h
View File

@ -95,7 +95,7 @@
//
#define BEEPER_PIN 6
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define LCD_SDSS 53
@ -119,4 +119,4 @@
#define BTN_ENC 23
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/ramps/pins_RAMPS.h
View File

@ -430,7 +430,7 @@
// LCDs and Controllers //
//////////////////////////
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
//
// LCD Display output pins
@ -706,7 +706,7 @@
#endif
#endif // NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
#if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(ADC_KEYPAD)
#define SHIFT_OUT 40

4
Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
View File

@ -128,7 +128,7 @@
// AnyCubic made the following changes to 1.1.0-RC8
// If these are appropriate for your LCD let us know.
//
#if 0 && HAS_SPI_LCD
#if 0 && HAS_WIRED_LCD
// LCD Display output pins
#if BOTH(NEWPANEL, PANEL_ONE)
@ -154,4 +154,4 @@
#define DOGLCD_A0 42
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

2
Marlin/src/pins/ramps/pins_TT_OSCAR.h
View File

@ -271,7 +271,7 @@
// LCDs and Controllers //
//////////////////////////
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
//
// LCD Display output pins

4
Marlin/src/pins/ramps/pins_ULTIMAKER.h
View File

@ -119,7 +119,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN 18
@ -158,7 +158,7 @@
#endif // !NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// M3/M4/M5 - Spindle/Laser Control

4
Marlin/src/pins/sam/pins_ARCHIM1.h
View File

@ -181,7 +181,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define BEEPER_PIN 23 // D24 PA15_CTS1
#define LCD_PINS_RS 17 // D17 PA12_RXD1
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
@ -198,4 +198,4 @@
#define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1
#endif // NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

2
Marlin/src/pins/sam/pins_ARCHIM2.h
View File

@ -237,7 +237,7 @@
//
// LCD / Controller
//
#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#define BEEPER_PIN 23 // D24 PA15_CTS1
#define LCD_PINS_RS 17 // D17 PA12_RXD1
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1

4
Marlin/src/pins/sam/pins_DUE3DOM.h
View File

@ -113,7 +113,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43
@ -168,4 +168,4 @@
#define BEEPER_PIN -1
#endif // SPARK_FULL_GRAPHICS
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/sam/pins_DUE3DOM_MINI.h
View File

@ -105,7 +105,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43
@ -171,4 +171,4 @@
#define DOGLCD_CS 45
#endif // SPARK_FULL_GRAPHICS
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/sam/pins_RADDS.h
View File

@ -226,7 +226,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ENABLED(RADDS_DISPLAY)
@ -287,7 +287,7 @@
#endif // SPARK_FULL_GRAPHICS
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
#ifndef SDSS
#define SDSS 4

4
Marlin/src/pins/sam/pins_RAMPS_DUO.h
View File

@ -76,7 +76,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if BOTH(NEWPANEL, PANEL_ONE)
#undef LCD_PINS_D4
@ -129,4 +129,4 @@
#endif // NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
View File

@ -139,7 +139,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
// ramps-fd lcd adaptor
#define BEEPER_PIN 37
@ -203,7 +203,7 @@
#define DOGLCD_MISO 74 // MISO_PIN
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
#if HAS_TMC_UART
/**

4
Marlin/src/pins/sam/pins_RURAMPS4D_11.h
View File

@ -200,7 +200,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62
@ -271,4 +271,4 @@
#define BTN_ENC 40
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/sam/pins_RURAMPS4D_13.h
View File

@ -186,7 +186,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
#if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62
@ -253,4 +253,4 @@
#define BTN_ENC 40
#endif
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/samd/pins_RAMPS_144.h
View File

@ -287,7 +287,7 @@
// LCDs and Controllers //
//////////////////////////
#if HAS_SPI_LCD
#if HAS_WIRED_LCD
//
// LCD Display output pins
@ -594,7 +594,7 @@
#endif
#endif // NEWPANEL
#endif // HAS_SPI_LCD
#endif // HAS_WIRED_LCD
//
// SD Support

Some files were not shown because too many files have changed in this diff Show More