bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Overridable Options - Part 5

Browse Source 
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
This commit is contained in:
Scott Lahteine 2015-07-30 22:21:18 -07:00 committed by Richard Wackerbarth
parent 5e834352a9
commit 58cfcd4239
33 changed files with 63 additions and 62 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/MarlinSerial.cpp
View File

@ -287,6 +287,6 @@ MarlinSerial MSerial;
#endif // !USBCON
// For AT90USB targets use the UART for BT interfacing
#if defined(USBCON) && defined(BTENABLED)
#if defined(USBCON) && ENABLED(BTENABLED)
HardwareSerial bt;
#endif

2
Marlin/MarlinSerial.h
View File

@ -153,7 +153,7 @@ extern MarlinSerial MSerial;
#endif // !USBCON
// Use the UART for BT in AT90USB configurations
#if defined(USBCON) && defined(BTENABLED)
#if defined(USBCON) && ENABLED(BTENABLED)
extern HardwareSerial bt;
#endif

16
Marlin/Sd2Card.cpp
View File

@ -19,10 +19,10 @@
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#include "Sd2Card.h"
//------------------------------------------------------------------------------
#ifndef SOFTWARE_SPI
#if DISABLED(SOFTWARE_SPI)
// functions for hardware SPI
//------------------------------------------------------------------------------
// make sure SPCR rate is in expected bits
@ -209,7 +209,7 @@ void Sd2Card::chipSelectHigh() {
}
//------------------------------------------------------------------------------
void Sd2Card::chipSelectLow() {
#ifndef SOFTWARE_SPI
#if DISABLED(SOFTWARE_SPI)
spiInit(spiRate_);
#endif // SOFTWARE_SPI
digitalWrite(chipSelectPin_, LOW);
@ -297,7 +297,7 @@ bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
pinMode(SPI_MOSI_PIN, OUTPUT);
pinMode(SPI_SCK_PIN, OUTPUT);
#ifndef SOFTWARE_SPI
#if DISABLED(SOFTWARE_SPI)
// SS must be in output mode even it is not chip select
pinMode(SS_PIN, OUTPUT);
// set SS high - may be chip select for another SPI device
@ -353,7 +353,7 @@ bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
}
chipSelectHigh();
#ifndef SOFTWARE_SPI
#if DISABLED(SOFTWARE_SPI)
return setSckRate(sckRateID);
#else // SOFTWARE_SPI
return true;
@ -373,7 +373,7 @@ bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
* the value zero, false, is returned for failure.
*/
bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) {
#ifdef SD_CHECK_AND_RETRY
#if ENABLED(SD_CHECK_AND_RETRY)
uint8_t retryCnt = 3;
// use address if not SDHC card
if (type()!= SD_CARD_TYPE_SDHC) blockNumber <<= 9;
@ -422,7 +422,7 @@ bool Sd2Card::readData(uint8_t *dst) {
return readData(dst, 512);
}
#ifdef SD_CHECK_AND_RETRY
#if ENABLED(SD_CHECK_AND_RETRY)
static const uint16_t crctab[] PROGMEM = {
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
@ -483,7 +483,7 @@ bool Sd2Card::readData(uint8_t* dst, uint16_t count) {
// transfer data
spiRead(dst, count);
#ifdef SD_CHECK_AND_RETRY
#if ENABLED(SD_CHECK_AND_RETRY)
{
uint16_t calcCrc = CRC_CCITT(dst, count);
uint16_t recvCrc = spiRec() << 8;

4
Marlin/Sd2Card.h
View File

@ -19,7 +19,7 @@
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef Sd2Card_h
#define Sd2Card_h
@ -125,7 +125,7 @@ uint8_t const SD_CARD_TYPE_SDHC = 3;
//------------------------------------------------------------------------------
// SPI pin definitions - do not edit here - change in SdFatConfig.h
//
#ifndef SOFTWARE_SPI
#if DISABLED(SOFTWARE_SPI)
// hardware pin defs
/** The default chip select pin for the SD card is SS. */
uint8_t const SD_CHIP_SELECT_PIN = SS_PIN;

2
Marlin/Sd2PinMap.h
View File

@ -21,7 +21,7 @@
#include "Marlin.h"
#include "macros.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef Sd2PinMap_h
#define Sd2PinMap_h

2
Marlin/SdBaseFile.cpp
View File

@ -19,7 +19,7 @@
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#include "SdBaseFile.h"
//------------------------------------------------------------------------------

2
Marlin/SdBaseFile.h
View File

@ -18,7 +18,7 @@
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef SdBaseFile_h
#define SdBaseFile_h

2
Marlin/SdFatConfig.h
View File

@ -22,7 +22,7 @@
* \brief configuration definitions
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef SdFatConfig_h
#define SdFatConfig_h

2
Marlin/SdFatStructs.h
View File

@ -18,7 +18,7 @@
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef SdFatStructs_h
#define SdFatStructs_h

2
Marlin/SdFatUtil.cpp
View File

@ -19,7 +19,7 @@
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#include "SdFatUtil.h"
//------------------------------------------------------------------------------

2
Marlin/SdFatUtil.h
View File

@ -18,7 +18,7 @@
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef SdFatUtil_h
#define SdFatUtil_h

2
Marlin/SdFile.cpp
View File

@ -19,7 +19,7 @@
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#include "SdFile.h"
/** Create a file object and open it in the current working directory.
*

2
Marlin/SdFile.h
View File

@ -23,7 +23,7 @@
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#include "SdBaseFile.h"
#include <Print.h>
#ifndef SdFile_h

2
Marlin/SdInfo.h
View File

@ -18,7 +18,7 @@
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef SdInfo_h
#define SdInfo_h

2
Marlin/SdVolume.cpp
View File

@ -18,7 +18,7 @@
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#include "SdVolume.h"
//------------------------------------------------------------------------------

2
Marlin/SdVolume.h
View File

@ -18,7 +18,7 @@
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#ifndef SdVolume_h
#define SdVolume_h
/**

3
Marlin/blinkm.cpp
View File

@ -3,7 +3,8 @@
Created by Tim Koster, August 21 2013.
*/
#include "Marlin.h"
#ifdef BLINKM
#if ENABLED(BLINKM)
#include "blinkm.h"

4
Marlin/buzzer.cpp
View File

@ -5,9 +5,9 @@
#if HAS_BUZZER
void buzz(long duration, uint16_t freq) {
if (freq > 0) {
#ifdef LCD_USE_I2C_BUZZER
#if ENABLED(LCD_USE_I2C_BUZZER)
lcd_buzz(duration, freq);
#elif defined(BEEPER) && BEEPER >= 0 // on-board buzzers have no further condition
#elif HAS_BUZZER // on-board buzzers have no further condition
SET_OUTPUT(BEEPER);
#ifdef SPEAKER // a speaker needs a AC ore a pulsed DC
//tone(BEEPER, freq, duration); // needs a PWMable pin

6
Marlin/cardreader.cpp
View File

@ -5,7 +5,7 @@
#include "temperature.h"
#include "language.h"
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
CardReader::CardReader() {
filesize = 0;
@ -128,7 +128,7 @@ void CardReader::ls() {
lsDive("", root);
}
#ifdef LONG_FILENAME_HOST_SUPPORT
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
/**
* Get a long pretty path based on a DOS 8.3 path
@ -195,7 +195,7 @@ void CardReader::initsd() {
cardOK = false;
if (root.isOpen()) root.close();
#ifdef SDSLOW
#if ENABLED(SDSLOW)
#define SPI_SPEED SPI_HALF_SPEED
#else
#define SPI_SPEED SPI_FULL_SPEED

6
Marlin/cardreader.h
View File

@ -1,7 +1,7 @@
#ifndef CARDREADER_H
#define CARDREADER_H
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#define MAX_DIR_DEPTH 10 // Maximum folder depth
@ -28,7 +28,7 @@ public:
void getStatus();
void printingHasFinished();
#ifdef LONG_FILENAME_HOST_SUPPORT
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
void printLongPath(char *path);
#endif
@ -82,7 +82,7 @@ extern CardReader card;
#define IS_SD_PRINTING (card.sdprinting)
#if (SDCARDDETECT > -1)
#ifdef SDCARDDETECTINVERTED
#if ENABLED(SDCARDDETECTINVERTED)
#define IS_SD_INSERTED (READ(SDCARDDETECT) != 0)
#else
#define IS_SD_INSERTED (READ(SDCARDDETECT) == 0)

4
Marlin/configurator/config/language.h
View File

@ -37,7 +37,7 @@
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
#endif
#ifdef HAS_AUTOMATIC_VERSIONING
#if ENABLED(HAS_AUTOMATIC_VERSIONING)
#include "_Version.h"
#endif
@ -216,7 +216,7 @@
// LCD Menu Messages
#if !(defined( DISPLAY_CHARSET_HD44780_JAPAN ) || defined( DISPLAY_CHARSET_HD44780_WESTERN ) || defined( DISPLAY_CHARSET_HD44780_CYRILLIC ))
#if DISABLED(DISPLAY_CHARSET_HD44780_JAPAN) && DISABLED(DISPLAY_CHARSET_HD44780_WESTERN) && DISABLED(DISPLAY_CHARSET_HD44780_CYRILLIC)
#define DISPLAY_CHARSET_HD44780_JAPAN
#endif

2
Marlin/digipot_mcp4451.cpp
View File

@ -1,6 +1,6 @@
#include "Configuration.h"
#ifdef DIGIPOT_I2C
#if ENABLED(DIGIPOT_I2C)
#include "Stream.h"
#include "utility/twi.h"

2
Marlin/dogm_bitmaps.h
View File

@ -3,7 +3,7 @@
// Please note that using the high-res version takes 402Bytes of PROGMEM.
//#define START_BMPHIGH
#ifdef START_BMPHIGH
#if ENABLED(START_BMPHIGH)
#define START_BMPWIDTH 112
#define START_BMPHEIGHT 38
#define START_BMPBYTEWIDTH 14

2
Marlin/mesh_bed_leveling.cpp
View File

@ -1,6 +1,6 @@
#include "mesh_bed_leveling.h"
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
mesh_bed_leveling mbl;

2
Marlin/mesh_bed_leveling.h
View File

@ -1,6 +1,6 @@
#include "Marlin.h"
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
#define MESH_X_DIST ((MESH_MAX_X - MESH_MIN_X)/(MESH_NUM_X_POINTS - 1))
#define MESH_Y_DIST ((MESH_MAX_Y - MESH_MIN_Y)/(MESH_NUM_Y_POINTS - 1))

2
Marlin/qr_solve.cpp
View File

@ -1,6 +1,6 @@
#include "qr_solve.h"
#ifdef AUTO_BED_LEVELING_GRID
#if ENABLED(AUTO_BED_LEVELING_GRID)
#include <stdlib.h>
#include <math.h>

2
Marlin/qr_solve.h
View File

@ -1,6 +1,6 @@
#include "Configuration.h"
#ifdef AUTO_BED_LEVELING_GRID
#if ENABLED(AUTO_BED_LEVELING_GRID)
void daxpy ( int n, double da, double dx[], int incx, double dy[], int incy );
double ddot ( int n, double dx[], int incx, double dy[], int incy );

24
Marlin/servo.cpp
View File

@ -42,10 +42,10 @@
attached() - Returns true if there is a servo attached.
detach() - Stops an attached servos from pulsing its i/o pin.
*/
*/
#include "Configuration.h"
#ifdef NUM_SERVOS
#if HAS_SERVOS
#include <avr/interrupt.h>
#include <Arduino.h>
@ -103,29 +103,29 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
// Interrupt handlers for Arduino
#ifdef _useTimer1
#if ENABLED(_useTimer1)
SIGNAL (TIMER1_COMPA_vect) { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif
#ifdef _useTimer3
#if ENABLED(_useTimer3)
SIGNAL (TIMER3_COMPA_vect) { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif
#ifdef _useTimer4
#if ENABLED(_useTimer4)
SIGNAL (TIMER4_COMPA_vect) { handle_interrupts(_timer4, &TCNT4, &OCR4A); }
#endif
#ifdef _useTimer5
#if ENABLED(_useTimer5)
SIGNAL (TIMER5_COMPA_vect) { handle_interrupts(_timer5, &TCNT5, &OCR5A); }
#endif
#else //!WIRING
// Interrupt handlers for Wiring
#ifdef _useTimer1
#if ENABLED(_useTimer1)
void Timer1Service() { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif
#ifdef _useTimer3
#if ENABLED(_useTimer3)
void Timer3Service() { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif
@ -133,7 +133,7 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
static void initISR(timer16_Sequence_t timer) {
#ifdef _useTimer1
#if ENABLED(_useTimer1)
if (timer == _timer1) {
TCCR1A = 0; // normal counting mode
TCCR1B = _BV(CS11); // set prescaler of 8
@ -152,7 +152,7 @@ static void initISR(timer16_Sequence_t timer) {
}
#endif
#ifdef _useTimer3
#if ENABLED(_useTimer3)
if (timer == _timer3) {
TCCR3A = 0; // normal counting mode
TCCR3B = _BV(CS31); // set prescaler of 8
@ -170,7 +170,7 @@ static void initISR(timer16_Sequence_t timer) {
}
#endif
#ifdef _useTimer4
#if ENABLED(_useTimer4)
if (timer == _timer4) {
TCCR4A = 0; // normal counting mode
TCCR4B = _BV(CS41); // set prescaler of 8
@ -180,7 +180,7 @@ static void initISR(timer16_Sequence_t timer) {
}
#endif
#ifdef _useTimer5
#if ENABLED(_useTimer5)
if (timer == _timer5) {
TCCR5A = 0; // normal counting mode
TCCR5B = _BV(CS51); // set prescaler of 8

2
Marlin/ultralcd_st7920_u8glib_rrd.h
View File

@ -3,7 +3,7 @@
#include "Marlin.h"
#ifdef U8GLIB_ST7920
#if ENABLED(U8GLIB_ST7920)
//set optimization so ARDUINO optimizes this file
#pragma GCC optimize (3)

2
Marlin/vector_3.cpp
View File

@ -19,7 +19,7 @@
#include <math.h>
#include "Marlin.h"
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
#include "vector_3.h"
vector_3::vector_3() : x(0), y(0), z(0) { }

2
Marlin/vector_3.h
View File

@ -19,7 +19,7 @@
#ifndef VECTOR_3_H
#define VECTOR_3_H
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
class matrix_3x3;
struct vector_3

10
Marlin/watchdog.cpp
View File

@ -1,6 +1,6 @@
#include "Marlin.h"
#ifdef USE_WATCHDOG
#if ENABLED(USE_WATCHDOG)
#include <avr/wdt.h>
#include "watchdog.h"
@ -18,15 +18,15 @@
/// intialise watch dog with a 4 sec interrupt time
void watchdog_init()
{
#ifdef WATCHDOG_RESET_MANUAL
#if ENABLED(WATCHDOG_RESET_MANUAL)
//We enable the watchdog timer, but only for the interrupt.
//Take care, as this requires the correct order of operation, with interrupts disabled. See the datasheet of any AVR chip for details.
wdt_reset();
_WD_CONTROL_REG = _BV(_WD_CHANGE_BIT) | _BV(WDE);
_WD_CONTROL_REG = _BV(WDIE) | WDTO_4S;
#else
#else
wdt_enable(WDTO_4S);
#endif
#endif
}
/// reset watchdog. MUST be called every 1s after init or avr will reset.
@ -40,7 +40,7 @@ void watchdog_reset()
//===========================================================================
//Watchdog timer interrupt, called if main program blocks >1sec and manual reset is enabled.
#ifdef WATCHDOG_RESET_MANUAL
#if ENABLED(WATCHDOG_RESET_MANUAL)
ISR(WDT_vect)
{
SERIAL_ERROR_START;

2
Marlin/watchdog.h
View File

@ -3,7 +3,7 @@
#include "Marlin.h"
#ifdef USE_WATCHDOG
#if ENABLED(USE_WATCHDOG)
// initialize watch dog with a 1 sec interrupt time
void watchdog_init();
// pad the dog/reset watchdog. MUST be called at least every second after the first watchdog_init or AVR will go into emergency procedures..