bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

♻️ Refactor HAL as singleton (#23357, #23871, #23897)

Browse Source
This commit is contained in:
Scott Lahteine 2022-02-17 18:50:31 -06:00 committed by Scott Lahteine
parent 428b67db31
commit 56cec9690a
81 changed files with 1976 additions and 1418 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Marlin/src/HAL/AVR/HAL.cpp
View File

@ -36,7 +36,7 @@
// ------------------------
// Don't initialize/override variable (which would happen in .init4)
uint8_t reset_reason __attribute__((section(".noinit")));
uint8_t MarlinHAL::reset_reason __attribute__((section(".noinit")));
// ------------------------
// Public functions
@ -45,22 +45,22 @@ uint8_t reset_reason __attribute__((section(".noinit")));
__attribute__((naked)) // Don't output function pro- and epilogue
__attribute__((used)) // Output the function, even if "not used"
__attribute__((section(".init3"))) // Put in an early user definable section
void HAL_save_reset_reason() {
void save_reset_reason() {
#if ENABLED(OPTIBOOT_RESET_REASON)
__asm__ __volatile__(
A("STS %0, r2")
: "=m"(reset_reason)
: "=m"(hal.reset_reason)
);
#else
reset_reason = MCUSR;
hal.reset_reason = MCUSR;
#endif
// Clear within 16ms since WDRF bit enables a 16ms watchdog timer -> Boot loop
MCUSR = 0;
hal.clear_reset_source();
wdt_disable();
}
void HAL_init() {
void MarlinHAL::init() {
// Init Servo Pins
#define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
#if HAS_SERVO_0
@ -79,7 +79,7 @@ void HAL_init() {
init_pwm_timers(); // Init user timers to default frequency - 1000HZ
}
void HAL_reboot() {
void MarlinHAL::reboot() {
#if ENABLED(USE_WATCHDOG)
while (1) { /* run out the watchdog */ }
#else

196
Marlin/src/HAL/AVR/HAL.h
View File

@ -74,9 +74,9 @@
#define CRITICAL_SECTION_START() unsigned char _sreg = SREG; cli()
#define CRITICAL_SECTION_END() SREG = _sreg
#endif
#define ISRS_ENABLED() TEST(SREG, SREG_I)
#define ENABLE_ISRS() sei()
#define DISABLE_ISRS() cli()
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
#define PWM_FREQUENCY 1000 // Default PWM frequency when set_pwm_duty() is called without set_pwm_frequency()
// ------------------------
// Types
@ -84,16 +84,15 @@
typedef int8_t pin_t;
#define SHARED_SERVOS HAS_SERVOS
#define HAL_SERVO_LIB Servo
#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp
class Servo;
typedef Servo hal_servo_t;
// ------------------------
// Public Variables
// ------------------------
extern uint8_t reset_reason;
// Serial ports
// ------------------------
#ifdef USBCON
#include "../../core/serial_hook.h"
typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
@ -142,57 +141,15 @@ extern uint8_t reset_reason;
#endif
#endif
// ------------------------
// Public functions
// ------------------------
void HAL_init();
//void cli();
//void _delay_ms(const int delay);
inline void HAL_clear_reset_source() { }
inline uint8_t HAL_get_reset_source() { return reset_reason; }
void HAL_reboot();
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
extern "C" int freeMemory();
#pragma GCC diagnostic pop
//
// ADC
#ifdef DIDR2
#define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
#else
#define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
#endif
inline void HAL_adc_init() {
ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
DIDR0 = 0;
#ifdef DIDR2
DIDR2 = 0;
#endif
}
#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
#ifdef MUX5
#define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
#else
#define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
#endif
//
#define HAL_ADC_VREF 5.0
#define HAL_ADC_RESOLUTION 10
#define HAL_READ_ADC() ADC
#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
//
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
@ -206,30 +163,109 @@ inline void HAL_adc_init() {
// AVR compatibility
#define strtof strtod
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
#define PWM_FREQUENCY 1000 // Default PWM frequency when set_pwm_duty() is called without set_pwm_frequency()
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
extern "C" int freeMemory();
#pragma GCC diagnostic pop
// ------------------------
// MarlinHAL Class
// ------------------------
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init(); // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
// Interrupts
static bool isr_state() { return TEST(SREG, SREG_I); }
static void isr_on() { sei(); }
static void isr_off() { cli(); }
static void delay_ms(const int ms) { _delay_ms(ms); }
// Tasks, called from idle()
static void idletask() {}
// Reset
static uint8_t reset_reason;
static uint8_t get_reset_source() { return reset_reason; }
static void clear_reset_source() { MCUSR = 0; }
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
// Called by Temperature::init once at startup
static void adc_init() {
ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
DIDR0 = 0;
#ifdef DIDR2
DIDR2 = 0;
#endif
}
// Called by Temperature::init for each sensor at startup
static void adc_enable(const uint8_t ch) {
#ifdef DIDR2
if (ch > 7) { SBI(DIDR2, ch & 0x07); return; }
#endif
SBI(DIDR0, ch);
}
// Begin ADC sampling on the given channel
static void adc_start(const uint8_t ch) {
#ifdef MUX5
ADCSRB = ch > 7 ? _BV(MUX5) : 0;
#else
ADCSRB = 0;
#endif
ADMUX = _BV(REFS0) | (ch & 0x07);
SBI(ADCSRA, ADSC);
}
// Is the ADC ready for reading?
static bool adc_ready() { return !TEST(ADCSRA, ADSC); }
// The current value of the ADC register
static __typeof__(ADC) adc_value() { return ADC; }
/**
* set_pwm_frequency
* Sets the frequency of the timer corresponding to the provided pin
* as close as possible to the provided desired frequency. Internally
* calculates the required waveform generation mode, prescaler and
* resolution values required and sets the timer registers accordingly.
* NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
* NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
*/
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
/**
* set_pwm_duty
* Set the PWM duty cycle of the provided pin to the provided value
* Optionally allows inverting the duty cycle [default = false]
* Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
*/
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
/*
* init_pwm_timers
* sets the default frequency for timers 2-5 to 1000HZ
* Set the default frequency for timers 2-5 to 1000HZ
*/
void init_pwm_timers();
static void init_pwm_timers();
/**
* Set the PWM duty cycle for the pin to the given value.
* Optionally invert the duty cycle [default = false]
* Optionally change the scale of the provided value to enable finer PWM duty control [default = 255]
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
/**
* Set the frequency of the timer for the given pin as close as
* possible to the provided desired frequency. Internally calculate
* the required waveform generation mode, prescaler, and resolution
* values and set timer registers accordingly.
* NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
* NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST_PWM_FAN Settings)
*/
static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
};

4
Marlin/src/HAL/AVR/MarlinSerial.cpp
View File

@ -486,7 +486,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
if (!hal.isr_state()) {
// Make room by polling if it is possible to transmit, and do so!
while (i == tx_buffer.tail) {
@ -534,7 +534,7 @@ void MarlinSerial<Cfg>::flushTX() {
if (!_written) return;
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
if (!hal.isr_state()) {
// Wait until everything was transmitted - We must do polling, as interrupts are disabled
while (tx_buffer.head != tx_buffer.tail || !B_TXC) {

6
Marlin/src/HAL/AVR/MarlinSerial.h
View File

@ -191,13 +191,13 @@
rx_framing_errors;
static ring_buffer_pos_t rx_max_enqueued;
static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head();
FORCE_INLINE static ring_buffer_pos_t atomic_read_rx_head();
static volatile bool rx_tail_value_not_stable;
static volatile uint16_t rx_tail_value_backup;
static FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value);
static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail();
FORCE_INLINE static void atomic_set_rx_tail(ring_buffer_pos_t value);
FORCE_INLINE static ring_buffer_pos_t atomic_read_rx_tail();
public:
FORCE_INLINE static void store_rxd_char();

6
Marlin/src/HAL/AVR/fast_pwm.cpp
View File

@ -107,7 +107,7 @@ const Timer get_pwm_timer(const pin_t pin) {
return Timer();
}
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
const Timer timer = get_pwm_timer(pin);
if (timer.isProtected || !timer.isPWM) return; // Don't proceed if protected timer or not recognized
@ -176,7 +176,7 @@ void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
_SET_ICRn(timer, res); // Set ICRn value (TOP) = res
}
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
// If v is 0 or v_size (max), digitalWrite to LOW or HIGH.
// Note that digitalWrite also disables PWM output for us (sets COM bit to 0)
if (v == 0)
@ -201,7 +201,7 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
}
}
void init_pwm_timers() {
void MarlinHAL::init_pwm_timers() {
// Init some timer frequencies to a default 1KHz
const pin_t pwm_pin[] = {
#ifdef __AVR_ATmega2560__

4
Marlin/src/HAL/AVR/math.h
View File

@ -35,7 +35,7 @@
// C B A is longIn1
// D C B A is longIn2
//
static FORCE_INLINE uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) {
FORCE_INLINE static uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) {
uint8_t tmp1;
uint8_t tmp2;
uint16_t intRes;
@ -89,7 +89,7 @@ static FORCE_INLINE uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2
// uses:
// r26 to store 0
// r27 to store the byte 1 of the 24 bit result
static FORCE_INLINE uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
FORCE_INLINE static uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
uint8_t tmp;
uint16_t intRes;
__asm__ __volatile__ (

6
Marlin/src/HAL/AVR/timers.h
View File

@ -109,12 +109,12 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
* (otherwise, characters will be lost due to UART overflow).
* Then: Stepper, Endstops, Temperature, and -finally- all others.
*/
#define HAL_timer_isr_prologue(T)
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_prologue(T) NOOP
#define HAL_timer_isr_epilogue(T) NOOP
/* 18 cycles maximum latency */
#ifndef HAL_STEP_TIMER_ISR
/* 18 cycles maximum latency */
#define HAL_STEP_TIMER_ISR() \
extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \

43
Marlin/src/HAL/DUE/HAL.cpp
View File

@ -34,7 +34,7 @@
// Public Variables
// ------------------------
uint16_t HAL_adc_result;
uint16_t MarlinHAL::adc_result;
// ------------------------
// Public functions
@ -42,8 +42,7 @@ uint16_t HAL_adc_result;
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// HAL initialization task
void HAL_init() {
void MarlinHAL::init() {
// Initialize the USB stack
#if ENABLED(SDSUPPORT)
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
@ -52,21 +51,15 @@ void HAL_init() {
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
}
// HAL idle task
void HAL_idletask() {
// Perform USB stack housekeeping
usb_task_idle();
void MarlinHAL::init_board() {
#ifdef BOARD_INIT
BOARD_INIT();
#endif
}
// Disable interrupts
void cli() { noInterrupts(); }
void MarlinHAL::idletask() { usb_task_idle(); } // Perform USB stack housekeeping
// Enable interrupts
void sei() { interrupts(); }
void HAL_clear_reset_source() { }
uint8_t HAL_get_reset_source() {
uint8_t MarlinHAL::get_reset_source() {
switch ((RSTC->RSTC_SR >> 8) & 0x07) {
case 0: return RST_POWER_ON;
case 1: return RST_BACKUP;
@ -77,12 +70,7 @@ uint8_t HAL_get_reset_source() {
}
}
void HAL_reboot() { rstc_start_software_reset(RSTC); }
void _delay_ms(const int delay_ms) {
// Todo: port for Due?
delay(delay_ms);
}
void MarlinHAL::reboot() { rstc_start_software_reset(RSTC); }
extern "C" {
extern unsigned int _ebss; // end of bss section
@ -94,19 +82,6 @@ int freeMemory() {
return (int)&free_memory - (heap_end ?: (int)&_ebss);
}
// ------------------------
// ADC
// ------------------------
void HAL_adc_start_conversion(const uint8_t ch) {
HAL_adc_result = analogRead(ch);
}
uint16_t HAL_adc_get_result() {
// nop
return HAL_adc_result;
}
// Forward the default serial ports
#if USING_HW_SERIAL0
DefaultSerial1 MSerial0(false, Serial);

135
Marlin/src/HAL/DUE/HAL.h
View File

@ -38,6 +38,10 @@
#include "../../core/serial_hook.h"
// ------------------------
// Serial ports
// ------------------------
typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
@ -97,60 +101,38 @@ extern DefaultSerial4 MSerial3;
#include "MarlinSerial.h"
#include "MarlinSerialUSB.h"
// On AVR this is in math.h?
#define square(x) ((x)*(x))
// ------------------------
// Types
// ------------------------
typedef int8_t pin_t;
#define SHARED_SERVOS HAS_SERVOS
#define HAL_SERVO_LIB Servo
#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp
class Servo;
typedef Servo hal_servo_t;
//
// Interrupts
//
#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define sei() noInterrupts()
#define cli() interrupts()
void cli(); // Disable interrupts
void sei(); // Enable interrupts
void HAL_clear_reset_source(); // clear reset reason
uint8_t HAL_get_reset_source(); // get reset reason
void HAL_reboot();
#define CRITICAL_SECTION_START() const bool _irqon = hal.isr_state(); hal.isr_off()
#define CRITICAL_SECTION_END() if (_irqon) hal.isr_on()
//
// ADC
//
extern uint16_t HAL_adc_result; // result of last ADC conversion
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
#endif
#define HAL_ANALOG_SELECT(ch)
inline void HAL_adc_init() {}//todo
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
void HAL_adc_start_conversion(const uint8_t ch);
uint16_t HAL_adc_get_result();
//
// PWM
//
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
//
// Pin Map
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
@ -159,27 +141,18 @@ inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255,
//
// Tone
//
void toneInit();
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
void noTone(const pin_t _pin);
// Enable hooks into idle and setup for HAL
#define HAL_IDLETASK 1
void HAL_idletask();
void HAL_init();
//
// Utility functions
//
void _delay_ms(const int delay);
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
#ifdef __cplusplus
@ -189,3 +162,69 @@ char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s
#ifdef __cplusplus
}
#endif
// Return free RAM between end of heap (or end bss) and whatever is current
int freeMemory();
// ------------------------
// MarlinHAL Class
// ------------------------
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init(); // Called early in setup()
static void init_board(); // Called less early in setup()
static void reboot(); // Software reset
// Interrupts
static bool isr_state() { return !__get_PRIMASK(); }
static void isr_on() { __enable_irq(); }
static void isr_off() { __disable_irq(); }
static void delay_ms(const int ms) { delay(ms); }
// Tasks, called from idle()
static void idletask();
// Reset
static uint8_t get_reset_source();
static void clear_reset_source() {}
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
static uint16_t adc_result;
// Called by Temperature::init once at startup
static void adc_init() {}
// Called by Temperature::init for each sensor at startup
static void adc_enable(const uint8_t ch) {}
// Begin ADC sampling on the given channel
static void adc_start(const uint8_t ch) { adc_result = analogRead(ch); }
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value() { return adc_result; }
/**
* Set the PWM duty cycle for the pin to the given value.
* No inverting the duty cycle in this HAL.
* No changing the maximum size of the provided value to enable finer PWM duty control in this HAL.
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
};

4
Marlin/src/HAL/DUE/MarlinSerial.cpp
View File

@ -406,7 +406,7 @@ size_t MarlinSerial<Cfg>::write(const uint8_t c) {
const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
if (!hal.isr_state()) {
// Make room by polling if it is possible to transmit, and do so!
while (i == tx_buffer.tail) {
@ -454,7 +454,7 @@ void MarlinSerial<Cfg>::flushTX() {
if (!_written) return;
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
if (!hal.isr_state()) {
// Wait until everything was transmitted - We must do polling, as interrupts are disabled
while (tx_buffer.head != tx_buffer.tail || !(HWUART->UART_SR & UART_SR_TXEMPTY)) {

2
Marlin/src/HAL/DUE/Tone.cpp
View File

@ -35,7 +35,7 @@
static pin_t tone_pin;
volatile static int32_t toggles;
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) {
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration/*=0*/) {
tone_pin = _pin;
toggles = 2 * frequency * duration / 1000;
HAL_timer_start(MF_TIMER_TONE, 2 * frequency);

2
Marlin/src/HAL/DUE/timers.h
View File

@ -125,4 +125,4 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_SR;
}
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_epilogue(T) NOOP

35
Marlin/src/HAL/ESP32/HAL.cpp
View File

@ -52,7 +52,7 @@
// Externs
// ------------------------
portMUX_TYPE spinlock = portMUX_INITIALIZER_UNLOCKED;
portMUX_TYPE MarlinHAL::spinlock = portMUX_INITIALIZER_UNLOCKED;
// ------------------------
// Local defines
@ -64,7 +64,7 @@ portMUX_TYPE spinlock = portMUX_INITIALIZER_UNLOCKED;
// Public Variables
// ------------------------
uint16_t HAL_adc_result;
uint16_t MarlinHAL::adc_result;
// ------------------------
// Private Variables
@ -95,20 +95,22 @@ volatile int numPWMUsed = 0,
#endif
#if ENABLED(USE_ESP32_EXIO)
HardwareSerial YSerial2(2);
void Write_EXIO(uint8_t IO, uint8_t v) {
if (ISRS_ENABLED()) {
DISABLE_ISRS();
if (hal.isr_state()) {
hal.isr_off();
YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100));
ENABLE_ISRS();
hal.isr_on();
}
else
YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100));
}
#endif
void HAL_init_board() {
void MarlinHAL::init_board() {
#if ENABLED(USE_ESP32_TASK_WDT)
esp_task_wdt_init(10, true);
#endif
@ -154,27 +156,24 @@ void HAL_init_board() {
#endif
}
void HAL_idletask() {
void MarlinHAL::idletask() {
#if BOTH(WIFISUPPORT, OTASUPPORT)
OTA_handle();
#endif
TERN_(ESP3D_WIFISUPPORT, esp3dlib.idletask());
}
void HAL_clear_reset_source() { }
uint8_t MarlinHAL::get_reset_source() { return rtc_get_reset_reason(1); }
uint8_t HAL_get_reset_source() { return rtc_get_reset_reason(1); }
void HAL_reboot() { ESP.restart(); }
void _delay_ms(int delay_ms) { delay(delay_ms); }
void MarlinHAL::reboot() { ESP.restart(); }
// return free memory between end of heap (or end bss) and whatever is current
int freeMemory() { return ESP.getFreeHeap(); }
int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); }
// ------------------------
// ADC
// ------------------------
#define ADC1_CHANNEL(pin) ADC1_GPIO ## pin ## _CHANNEL
adc1_channel_t get_channel(int pin) {
@ -196,7 +195,7 @@ void adc1_set_attenuation(adc1_channel_t chan, adc_atten_t atten) {
}
}
void HAL_adc_init() {
void MarlinHAL::adc_init() {
// Configure ADC
adc1_config_width(ADC_WIDTH_12Bit);
@ -228,11 +227,11 @@ void HAL_adc_init() {
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
const adc1_channel_t chan = get_channel(adc_pin);
void MarlinHAL::adc_start(const pin_t pin) {
const adc1_channel_t chan = get_channel(pin);
uint32_t mv;
esp_adc_cal_get_voltage((adc_channel_t)chan, &characteristics[attenuations[chan]], &mv);
HAL_adc_result = mv * 1023.0 / 3300.0;
adc_result = mv * 1023.0 / 3300.0;
// Change the attenuation level based on the new reading
adc_atten_t atten;

144
Marlin/src/HAL/ESP32/HAL.h
View File

@ -49,8 +49,6 @@
// Defines
// ------------------------
extern portMUX_TYPE spinlock;
#define MYSERIAL1 flushableSerial
#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
@ -65,9 +63,6 @@ extern portMUX_TYPE spinlock;
#define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)
#define CRITICAL_SECTION_END() portEXIT_CRITICAL(&spinlock)
#define ISRS_ENABLED() (spinlock.owner == portMUX_FREE_VAL)
#define ENABLE_ISRS() if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock)
#define DISABLE_ISRS() portENTER_CRITICAL(&spinlock)
// ------------------------
// Types
@ -75,14 +70,8 @@ extern portMUX_TYPE spinlock;
typedef int16_t pin_t;
#define HAL_SERVO_LIB Servo
// ------------------------
// Public Variables
// ------------------------
/** result of last ADC conversion */
extern uint16_t HAL_adc_result;
class Servo;
typedef Servo hal_servo_t;
// ------------------------
// Public functions
@ -91,59 +80,18 @@ extern uint16_t HAL_adc_result;
//
// Tone
//
void toneInit();
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
void noTone(const pin_t _pin);
// clear reset reason
void HAL_clear_reset_source();
// reset reason
uint8_t HAL_get_reset_source();
void HAL_reboot();
void _delay_ms(int delay);
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
void analogWrite(pin_t pin, int value);
// ADC
#define HAL_ANALOG_SELECT(pin)
void HAL_adc_init();
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
void HAL_adc_start_conversion(const uint8_t adc_pin);
// PWM
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
// Pin Map
//
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Enable hooks into idle and setup for HAL
#define HAL_IDLETASK 1
#define BOARD_INIT() HAL_init_board();
void HAL_idletask();
inline void HAL_init() {}
void HAL_init_board();
#if ENABLED(USE_ESP32_EXIO)
void Write_EXIO(uint8_t IO, uint8_t v);
#endif
@ -188,3 +136,85 @@ FORCE_INLINE static void DELAY_CYCLES(uint32_t x) {
}
}
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
void _delay_ms(const int ms);
// ------------------------
// MarlinHAL Class
// ------------------------
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init() {} // Called early in setup()
static void init_board(); // Called less early in setup()
static void reboot(); // Restart the firmware
// Interrupts
static portMUX_TYPE spinlock;
static bool isr_state() { return spinlock.owner == portMUX_FREE_VAL; }
static void isr_on() { if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock); }
static void isr_off() { portENTER_CRITICAL(&spinlock); }
static void delay_ms(const int ms) { _delay_ms(ms); }
// Tasks, called from idle()
static void idletask();
// Reset
static uint8_t get_reset_source();
static void clear_reset_source() {}
// Free SRAM
static int freeMemory();
//
// ADC Methods
//
static uint16_t adc_result;
// Called by Temperature::init once at startup
static void adc_init();
// Called by Temperature::init for each sensor at startup
static void adc_enable(const pin_t pin) {}
// Begin ADC sampling on the given channel
static void adc_start(const pin_t pin);
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value() { return adc_result; }
/**
* Set the PWM duty cycle for the pin to the given value.
* No inverting the duty cycle in this HAL.
* No changing the maximum size of the provided value to enable finer PWM duty control in this HAL.
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
};

2
Marlin/src/HAL/ESP32/Tone.cpp
View File

@ -35,7 +35,7 @@
static pin_t tone_pin;
volatile static int32_t toggles;
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) {
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration/*=0*/) {
tone_pin = _pin;
toggles = 2 * frequency * duration / 1000;
HAL_timer_start(MF_TIMER_TONE, 2 * frequency);

2
Marlin/src/HAL/ESP32/timers.cpp
View File

@ -81,7 +81,7 @@ void IRAM_ATTR timer_isr(void *para) {
* @param timer_num timer number to initialize
* @param frequency frequency of the timer
*/
void HAL_timer_start(const uint8_t timer_num, uint32_t frequency) {
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
const tTimerConfig timer = timer_config[timer_num];
timer_config_t config;

6
Marlin/src/HAL/ESP32/timers.h
View File

@ -127,7 +127,7 @@ extern const tTimerConfig timer_config[];
// Public functions
// ------------------------
void HAL_timer_start (const uint8_t timer_num, uint32_t frequency);
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t count);
hal_timer_t HAL_timer_get_compare(const uint8_t timer_num);
hal_timer_t HAL_timer_get_count(const uint8_t timer_num);
@ -136,5 +136,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
#define HAL_timer_isr_prologue(T)
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_prologue(T) NOOP
#define HAL_timer_isr_epilogue(T) NOOP

37
Marlin/src/HAL/LINUX/HAL.cpp
View File

@ -24,6 +24,10 @@
#include "../../inc/MarlinConfig.h"
#include "../shared/Delay.h"
// ------------------------
// Serial ports
// ------------------------
MSerialT usb_serial(TERN0(EMERGENCY_PARSER, true));
// U8glib required functions
@ -37,42 +41,21 @@ extern "C" {
//************************//
// return free heap space
int freeMemory() {
return 0;
}
int freeMemory() { return 0; }
// ------------------------
// ADC
// ------------------------
void HAL_adc_init() {
uint8_t MarlinHAL::active_ch = 0;
}
void HAL_adc_enable_channel(const uint8_t ch) {
}
uint8_t active_ch = 0;
void HAL_adc_start_conversion(const uint8_t ch) {
active_ch = ch;
}
bool HAL_adc_finished() {
return true;
}
uint16_t HAL_adc_get_result() {
pin_t pin = analogInputToDigitalPin(active_ch);
uint16_t MarlinHAL::adc_value() {
const pin_t pin = analogInputToDigitalPin(active_ch);
if (!VALID_PIN(pin)) return 0;
uint16_t data = ((Gpio::get(pin) >> 2) & 0x3FF);
const uint16_t data = ((Gpio::get(pin) >> 2) & 0x3FF);
return data; // return 10bit value as Marlin expects
}
void HAL_pwm_init() {
}
void HAL_reboot() { /* Reset the application state and GPIO */ }
void MarlinHAL::reboot() { /* Reset the application state and GPIO */ }
#endif // __PLAT_LINUX__

143
Marlin/src/HAL/LINUX/HAL.h
View File

@ -21,34 +21,13 @@
*/
#pragma once
#define CPU_32_BIT
#define F_CPU 100000000UL
#define SystemCoreClock F_CPU
#include <iostream>
#include <stdint.h>
#include <stdarg.h>
#undef min
#undef max
#include <algorithm>
void _printf (const char *format, ...);
void _putc(uint8_t c);
uint8_t _getc();
//extern "C" volatile uint32_t _millis;
//arduino: Print.h
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
//arduino: binary.h (weird defines)
#define B01 1
#define B10 2
#include "hardware/Clock.h"
#include "../shared/Marduino.h"
@ -58,27 +37,56 @@ uint8_t _getc();
#include "watchdog.h"
#include "serial.h"
#define SHARED_SERVOS HAS_SERVOS
// ------------------------
// Defines
// ------------------------
extern MSerialT usb_serial;
#define MYSERIAL1 usb_serial
#define CPU_32_BIT
#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp
#define F_CPU 100000000UL
#define SystemCoreClock F_CPU
#define DELAY_CYCLES(x) Clock::delayCycles(x)
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
void _printf(const char *format, ...);
void _putc(uint8_t c);
uint8_t _getc();
//arduino: Print.h
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
//arduino: binary.h (weird defines)
#define B01 1
#define B10 2
// ------------------------
// Serial ports
// ------------------------
extern MSerialT usb_serial;
#define MYSERIAL1 usb_serial
//
// Interrupts
//
#define CRITICAL_SECTION_START()
#define CRITICAL_SECTION_END()
#define ISRS_ENABLED()
#define ENABLE_ISRS()
#define DISABLE_ISRS()
inline void HAL_init() {}
// ADC
#define HAL_ADC_VREF 5.0
#define HAL_ADC_RESOLUTION 10
// ------------------------
// Class Utilities
// ------------------------
// Utility functions
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
@ -88,29 +96,66 @@ int freeMemory();
#pragma GCC diagnostic pop
// ADC
#define HAL_ADC_VREF 5.0
#define HAL_ADC_RESOLUTION 10
#define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch)
#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
// ------------------------
// MarlinHAL Class
// ------------------------
void HAL_adc_init();
void HAL_adc_enable_channel(const uint8_t ch);
void HAL_adc_start_conversion(const uint8_t ch);
uint16_t HAL_adc_get_result();
class MarlinHAL {
public:
// PWM
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
// Earliest possible init, before setup()
MarlinHAL() {}
// Reset source
inline void HAL_clear_reset_source(void) {}
inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; }
static void init() {} // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Reset the application state and GPIO
void HAL_reboot(); // Reset the application state and GPIO
// Interrupts
static bool isr_state() { return true; }
static void isr_on() {}
static void isr_off() {}
/* ---------------- Delay in cycles */
FORCE_INLINE static void DELAY_CYCLES(uint64_t x) {
Clock::delayCycles(x);
static void delay_ms(const int ms) { _delay_ms(ms); }
// Tasks, called from idle()
static void idletask() {}
// Reset
static constexpr uint8_t reset_reason = RST_POWER_ON;
static uint8_t get_reset_source() { return reset_reason; }
static void clear_reset_source() {}
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
static uint8_t active_ch;
// Called by Temperature::init once at startup
static void adc_init() {}
// Called by Temperature::init for each sensor at startup
static void adc_enable(const uint8_t) {}
// Begin ADC sampling on the given channel
static void adc_start(const uint8_t ch) { active_ch = ch; }
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value();
/**
* Set the PWM duty cycle for the pin to the given value.
* No option to change the resolution or invert the duty cycle.
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
static void set_pwm_frequency(const pin_t, int) {}
};

4
Marlin/src/HAL/LINUX/arduino.cpp
View File

@ -31,9 +31,7 @@ void cli() { } // Disable
void sei() { } // Enable
// Time functions
void _delay_ms(const int delay_ms) {
delay(delay_ms);
}
void _delay_ms(const int ms) { delay(ms); }
uint32_t millis() {
return (uint32_t)Clock::millis();

5
Marlin/src/HAL/LINUX/include/Arduino.h
View File

@ -59,7 +59,6 @@ typedef uint8_t byte;
#endif
#define sq(v) ((v) * (v))
#define square(v) sq(v)
#define constrain(value, arg_min, arg_max) ((value) < (arg_min) ? (arg_min) :((value) > (arg_max) ? (arg_max) : (value)))
// Interrupts
@ -74,8 +73,8 @@ extern "C" {
}
// Time functions
extern "C" void delay(const int milis);
void _delay_ms(const int delay);
extern "C" void delay(const int ms);
void _delay_ms(const int ms);
void delayMicroseconds(unsigned long);
uint32_t millis();

4
Marlin/src/HAL/LINUX/timers.h
View File

@ -92,5 +92,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
#define HAL_timer_isr_prologue(T)
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_prologue(T) NOOP
#define HAL_timer_isr_epilogue(T) NOOP

46
Marlin/src/HAL/LPC1768/HAL.cpp
View File

@ -31,7 +31,7 @@
DefaultSerial1 USBSerial(false, UsbSerial);
uint32_t HAL_adc_reading = 0;
uint32_t MarlinHAL::adc_result = 0;
// U8glib required functions
extern "C" {
@ -41,8 +41,6 @@ extern "C" {
void u8g_Delay(uint16_t val) { delay(val); }
}
//************************//
// return free heap space
int freeMemory() {
char stack_end;
@ -54,7 +52,27 @@ int freeMemory() {
return result;
}
// scan command line for code
void MarlinHAL::reboot() { NVIC_SystemReset(); }
uint8_t MarlinHAL::get_reset_source() {
#if ENABLED(USE_WATCHDOG)
if (watchdog_timed_out()) return RST_WATCHDOG;
#endif
return RST_POWER_ON;
}
void MarlinHAL::clear_reset_source() {
TERN_(USE_WATCHDOG, watchdog_clear_timeout_flag());
}
void flashFirmware(const int16_t) {
delay(500); // Give OS time to disconnect
USB_Connect(false); // USB clear connection
delay(1000); // Give OS time to notice
hal.reboot();
}
// For M42/M43, scan command line for pin code
// return index into pin map array if found and the pin is valid.
// return dval if not found or not a valid pin.
int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
@ -63,24 +81,4 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
return ind > -1 ? ind : dval;
}
void flashFirmware(const int16_t) {
delay(500); // Give OS time to disconnect
USB_Connect(false); // USB clear connection
delay(1000); // Give OS time to notice
HAL_reboot();
}
void HAL_clear_reset_source(void) {
TERN_(USE_WATCHDOG, watchdog_clear_timeout_flag());
}
uint8_t HAL_get_reset_source(void) {
#if ENABLED(USE_WATCHDOG)
if (watchdog_timed_out()) return RST_WATCHDOG;
#endif
return RST_POWER_ON;
}
void HAL_reboot() { NVIC_SystemReset(); }
#endif // TARGET_LPC1768

159
Marlin/src/HAL/LPC1768/HAL.h
View File

@ -28,8 +28,6 @@
#define CPU_32_BIT
void HAL_init();
#include <stdint.h>
#include <stdarg.h>
#include <algorithm>
@ -47,12 +45,9 @@ extern "C" volatile uint32_t _millis;
#include <pinmapping.h>
#include <CDCSerial.h>
//
// Default graphical display delays
//
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Serial ports
// ------------------------
typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
extern DefaultSerial1 USBSerial;
@ -114,26 +109,12 @@ extern DefaultSerial1 USBSerial;
//
// Interrupts
//
#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (irqon) __enable_irq()
//
// Utility functions
//
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
//
// ADC API
// ADC
//
#define ADC_MEDIAN_FILTER_SIZE (23) // Higher values increase step delay (phase shift),
@ -152,20 +133,9 @@ int freeMemory();
#define HAL_ADC_RESOLUTION 12 // 15 bit maximum, raw temperature is stored as int16_t
#define HAL_ADC_FILTERED // Disable oversampling done in Marlin as ADC values already filtered in HAL
using FilteredADC = LPC176x::ADC<ADC_LOWPASS_K_VALUE, ADC_MEDIAN_FILTER_SIZE>;
extern uint32_t HAL_adc_reading;
[[gnu::always_inline]] inline void HAL_adc_start_conversion(const pin_t pin) {
HAL_adc_reading = FilteredADC::read(pin) >> (16 - HAL_ADC_RESOLUTION); // returns 16bit value, reduce to required bits
}
[[gnu::always_inline]] inline uint16_t HAL_adc_get_result() {
return HAL_adc_reading;
}
#define HAL_adc_init()
#define HAL_ANALOG_SELECT(pin) FilteredADC::enable_channel(pin)
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() (true)
//
// Pin Mapping for M42, M43, M226
//
// Test whether the pin is valid
constexpr bool VALID_PIN(const pin_t pin) {
@ -192,32 +162,101 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
// P0.6 thru P0.9 are for the onboard SD card
#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09,
#define HAL_IDLETASK 1
void HAL_idletask();
// ------------------------
// Defines
// ------------------------
#define PLATFORM_M997_SUPPORT
void flashFirmware(const int16_t);
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
// Default graphical display delays
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
// ------------------------
// MarlinHAL Class
// ------------------------
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init(); // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
// Interrupts
static bool isr_state() { return !__get_PRIMASK(); }
static void isr_on() { __enable_irq(); }
static void isr_off() { __disable_irq(); }
static void delay_ms(const int ms) { _delay_ms(ms); }
// Tasks, called from idle()
static void idletask();
// Reset
static uint8_t get_reset_source();
static void clear_reset_source();
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
using FilteredADC = LPC176x::ADC<ADC_LOWPASS_K_VALUE, ADC_MEDIAN_FILTER_SIZE>;
// Called by Temperature::init once at startup
static void adc_init() {}
// Called by Temperature::init for each sensor at startup
static void adc_enable(const pin_t pin) {
FilteredADC::enable_channel(pin);
}
// Begin ADC sampling on the given pin
static uint32_t adc_result;
static void adc_start(const pin_t pin) {
adc_result = FilteredADC::read(pin) >> (16 - HAL_ADC_RESOLUTION); // returns 16bit value, reduce to required bits
}
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value() { return uint16_t(adc_result); }
/**
* Set the PWM duty cycle for the pin to the given value.
* Optionally invert the duty cycle [default = false]
* Optionally change the scale of the provided value to enable finer PWM duty control [default = 255]
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
/**
* set_pwm_frequency
* Set the frequency of the timer corresponding to the provided pin
* All Hardware PWM pins run at the same frequency and all
* Software PWM pins run at the same frequency
* All Hardware PWM pins will run at the same frequency and
* All Software PWM pins will run at the same frequency
*/
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
/**
* set_pwm_duty
* Set the PWM duty cycle of the provided pin to the provided value
* Optionally allows inverting the duty cycle [default = false]
* Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
*/
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
// Reset source
void HAL_clear_reset_source(void);
uint8_t HAL_get_reset_source(void);
void HAL_reboot();
static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
};

3
Marlin/src/HAL/LPC1768/Servo.h
View File

@ -65,4 +65,5 @@ class libServo: public Servo {
}
};
#define HAL_SERVO_LIB libServo
class libServo;
typedef libServo hal_servo_t;

6
Marlin/src/HAL/LPC1768/fast_pwm.cpp
View File

@ -21,16 +21,16 @@
*/
#ifdef TARGET_LPC1768
#include "../../inc/MarlinConfigPre.h"
#include "../../inc/MarlinConfig.h"
#include <pwm.h>
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
if (!LPC176x::pin_is_valid(pin)) return;
if (LPC176x::pwm_attach_pin(pin))
LPC176x::pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size); // map 1-254 onto PWM range
}
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
LPC176x::pwm_set_frequency(pin, f_desired);
}

6
Marlin/src/HAL/LPC1768/main.cpp
View File

@ -48,7 +48,7 @@ void SysTick_Callback() { disk_timerproc(); }
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
void HAL_init() {
void MarlinHAL::init() {
// Init LEDs
#if PIN_EXISTS(LED)
@ -130,7 +130,7 @@ void HAL_init() {
const millis_t usb_timeout = millis() + 2000;
while (!USB_Configuration && PENDING(millis(), usb_timeout)) {
delay(50);
HAL_idletask();
idletask();
#if PIN_EXISTS(LED)
TOGGLE(LED_PIN); // Flash quickly during USB initialization
#endif
@ -142,7 +142,7 @@ void HAL_init() {
}
// HAL idle task
void HAL_idletask() {
void MarlinHAL::idletask() {
#if HAS_SHARED_MEDIA
// If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB.

2
Marlin/src/HAL/LPC1768/timers.h
View File

@ -170,4 +170,4 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
}
}
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_epilogue(T) NOOP

173
Marlin/src/HAL/NATIVE_SIM/HAL.h
View File

@ -21,18 +21,10 @@
*/
#pragma once
#define CPU_32_BIT
#define HAL_IDLETASK
void HAL_idletask();
#define F_CPU 100000000
#define SystemCoreClock F_CPU
#include <stdint.h>
#include <stdarg.h>
#undef min
#undef max
#include <algorithm>
#include "pinmapping.h"
@ -40,8 +32,6 @@ void _printf (const char *format, ...);
void _putc(uint8_t c);
uint8_t _getc();
//extern "C" volatile uint32_t _millis;
//arduino: Print.h
#define DEC 10
#define HEX 16
@ -58,7 +48,23 @@ uint8_t _getc();
#include "watchdog.h"
#include "serial.h"
#define SHARED_SERVOS HAS_SERVOS
// ------------------------
// Defines
// ------------------------
#define CPU_32_BIT
#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp
#define F_CPU 100000000
#define SystemCoreClock F_CPU
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Serial ports
// ------------------------
extern MSerialT serial_stream_0;
extern MSerialT serial_stream_1;
@ -98,49 +104,19 @@ extern MSerialT serial_stream_3;
#endif
#endif
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
//
// ------------------------
// Interrupts
//
// ------------------------
#define CRITICAL_SECTION_START()
#define CRITICAL_SECTION_END()
#define ISRS_ENABLED()
#define ENABLE_ISRS()
#define DISABLE_ISRS()
inline void HAL_init() {}
// Utility functions
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
int freeMemory();
#pragma GCC diagnostic pop
// ------------------------
// ADC
// ------------------------
#define HAL_ADC_VREF 5.0
#define HAL_ADC_RESOLUTION 10
#define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch)
#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
void HAL_adc_init();
void HAL_adc_enable_channel(const uint8_t ch);
void HAL_adc_start_conversion(const uint8_t ch);
uint16_t HAL_adc_get_result();
// PWM
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
// Reset source
inline void HAL_clear_reset_source(void) {}
inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; }
void HAL_reboot();
/* ---------------- Delay in cycles */
@ -159,29 +135,22 @@ constexpr inline std::size_t strlen_constexpr(const char* str) {
// https://github.com/gcc-mirror/gcc/blob/5c7634a0e5f202935aa6c11b6ea953b8bf80a00a/libstdc%2B%2B-v3/include/bits/char_traits.h#L329
if (str != nullptr) {
std::size_t i = 0;
while (str[i] != '\0') {
++i;
}
while (str[i] != '\0') ++i;
return i;
}
return 0;
}
constexpr inline int strncmp_constexpr(const char* lhs, const char* rhs, std::size_t count) {
// https://github.com/gcc-mirror/gcc/blob/13b9cbfc32fe3ac4c81c4dd9c42d141c8fb95db4/libstdc%2B%2B-v3/include/bits/char_traits.h#L655
if (lhs == nullptr || rhs == nullptr) {
if (lhs == nullptr || rhs == nullptr)
return rhs != nullptr ? -1 : 1;
}
for (std::size_t i = 0; i < count; ++i) {
if (lhs[i] != rhs[i]) {
for (std::size_t i = 0; i < count; ++i)
if (lhs[i] != rhs[i])
return lhs[i] < rhs[i] ? -1 : 1;
} else if (lhs[i] == '\0') {
else if (lhs[i] == '\0')
return 0;
}
}
return 0;
}
@ -193,14 +162,11 @@ constexpr inline const char* strstr_constexpr(const char* str, const char* targe
do {
char sc = {};
do {
if ((sc = *str++) == '\0') {
return nullptr;
}
if ((sc = *str++) == '\0') return nullptr;
} while (sc != c);
} while (strncmp_constexpr(str, target, len) != 0);
--str;
}
return str;
}
@ -211,12 +177,87 @@ constexpr inline char* strstr_constexpr(char* str, const char* target) {
do {
char sc = {};
do {
if ((sc = *str++) == '\0') {
return nullptr;
}
if ((sc = *str++) == '\0') return nullptr;
} while (sc != c);
} while (strncmp_constexpr(str, target, len) != 0);
--str;
}
return str;
}
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
// ------------------------
// MarlinHAL Class
// ------------------------
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init() {} // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
// Interrupts
static bool isr_state() { return true; }
static void isr_on() {}
static void isr_off() {}
static void delay_ms(const int ms) { _delay_ms(ms); }
// Tasks, called from idle()
static void idletask();
// Reset
static constexpr uint8_t reset_reason = RST_POWER_ON;
static uint8_t get_reset_source() { return reset_reason; }
static void clear_reset_source() {}
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
static uint8_t active_ch;
// Called by Temperature::init once at startup
static void adc_init();
// Called by Temperature::init for each sensor at startup
static void adc_enable(const uint8_t ch);
// Begin ADC sampling on the given channel
static void adc_start(const uint8_t ch);
// Is the ADC ready for reading?
static bool adc_ready();
// The current value of the ADC register
static uint16_t adc_value();
/**
* Set the PWM duty cycle for the pin to the given value.
* No option to invert the duty cycle [default = false]
* No option to change the scale of the provided value to enable finer PWM duty control [default = 255]
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
};

4
Marlin/src/HAL/NATIVE_SIM/timers.h
View File

@ -87,5 +87,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
#define HAL_timer_isr_prologue(T)
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_prologue(T) NOOP
#define HAL_timer_isr_epilogue(T) NOOP

213
Marlin/src/HAL/SAMD51/HAL.cpp
View File

@ -42,10 +42,6 @@
#endif
#endif
// ------------------------
// Local defines
// ------------------------
#define GET_TEMP_0_ADC() TERN(HAS_TEMP_ADC_0, PIN_TO_ADC(TEMP_0_PIN), -1)
#define GET_TEMP_1_ADC() TERN(HAS_TEMP_ADC_1, PIN_TO_ADC(TEMP_1_PIN), -1)
#define GET_TEMP_2_ADC() TERN(HAS_TEMP_ADC_2, PIN_TO_ADC(TEMP_2_PIN), -1)
@ -61,6 +57,9 @@
#define GET_BOARD_ADC() TERN(HAS_TEMP_ADC_BOARD, PIN_TO_ADC(TEMP_BOARD_PIN), -1)
#define GET_FILAMENT_WIDTH_ADC() TERN(FILAMENT_WIDTH_SENSOR, PIN_TO_ADC(FILWIDTH_PIN), -1)
#define GET_BUTTONS_ADC() TERN(HAS_ADC_BUTTONS, PIN_TO_ADC(ADC_KEYPAD_PIN), -1)
#define GET_JOY_ADC_X() TERN(HAS_JOY_ADC_X, PIN_TO_ADC(JOY_X_PIN), -1)
#define GET_JOY_ADC_Y() TERN(HAS_JOY_ADC_Y, PIN_TO_ADC(JOY_Y_PIN), -1)
#define GET_JOY_ADC_Z() TERN(HAS_JOY_ADC_Z, PIN_TO_ADC(JOY_Z_PIN), -1)
#define IS_ADC_REQUIRED(n) ( \
GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n || GET_TEMP_3_ADC() == n \
@ -72,6 +71,7 @@
|| GET_BOARD_ADC() == n \
|| GET_FILAMENT_WIDTH_ADC() == n \
|| GET_BUTTONS_ADC() == n \
|| GET_JOY_ADC_X() == n || GET_JOY_ADC_Y() == n || GET_JOY_ADC_Z() == n \
)
#if IS_ADC_REQUIRED(0)
@ -91,6 +91,118 @@
#define DMA_IS_REQUIRED 1
#endif
enum ADCIndex {
#if GET_TEMP_0_ADC() == 0
TEMP_0,
#endif
#if GET_TEMP_1_ADC() == 0
TEMP_1,
#endif
#if GET_TEMP_2_ADC() == 0
TEMP_2,
#endif
#if GET_TEMP_3_ADC() == 0
TEMP_3,
#endif
#if GET_TEMP_4_ADC() == 0
TEMP_4,
#endif
#if GET_TEMP_5_ADC() == 0
TEMP_5,
#endif
#if GET_TEMP_6_ADC() == 0
TEMP_6,
#endif
#if GET_TEMP_7_ADC() == 0
TEMP_7,
#endif
#if GET_BED_ADC() == 0
TEMP_BED,
#endif
#if GET_CHAMBER_ADC() == 0
TEMP_CHAMBER,
#endif
#if GET_PROBE_ADC() == 0
TEMP_PROBE,
#endif
#if GET_COOLER_ADC() == 0
TEMP_COOLER,
#endif
#if GET_BOARD_ADC() == 0
TEMP_BOARD,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 0
FILWIDTH,
#endif
#if GET_BUTTONS_ADC() == 0
ADC_KEY,
#endif
#if GET_JOY_ADC_X() == 0
JOY_X,
#endif
#if GET_JOY_ADC_Y() == 0
JOY_Y,
#endif
#if GET_JOY_ADC_Z() == 0
JOY_Z,
#endif
#if GET_TEMP_0_ADC() == 1
TEMP_0,
#endif
#if GET_TEMP_1_ADC() == 1
TEMP_1,
#endif
#if GET_TEMP_2_ADC() == 1
TEMP_2,
#endif
#if GET_TEMP_3_ADC() == 1
TEMP_3,
#endif
#if GET_TEMP_4_ADC() == 1
TEMP_4,
#endif
#if GET_TEMP_5_ADC() == 1
TEMP_5,
#endif
#if GET_TEMP_6_ADC() == 1
TEMP_6,
#endif
#if GET_TEMP_7_ADC() == 1
TEMP_7,
#endif
#if GET_BED_ADC() == 1
TEMP_BED,
#endif
#if GET_CHAMBER_ADC() == 1
TEMP_CHAMBER,
#endif
#if GET_PROBE_ADC() == 1
TEMP_PROBE,
#endif
#if GET_COOLER_ADC() == 1
TEMP_COOLER,
#endif
#if GET_BOARD_ADC() == 1
TEMP_BOARD,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 1
FILWIDTH,
#endif
#if GET_BUTTONS_ADC() == 1
ADC_KEY,
#endif
#if GET_JOY_ADC_X() == 1
JOY_X,
#endif
#if GET_JOY_ADC_Y() == 1
JOY_Y,
#endif
#if GET_JOY_ADC_Z() == 1
JOY_Z,
#endif
ADC_COUNT
};
// ------------------------
// Types
// ------------------------
@ -108,12 +220,10 @@
// Private Variables
// ------------------------
uint16_t HAL_adc_result;
#if ADC_IS_REQUIRED
// Pins used by ADC inputs. Order must be ADC0 inputs first then ADC1
const uint8_t adc_pins[] = {
static constexpr uint8_t adc_pins[ADC_COUNT] = {
// ADC0 pins
#if GET_TEMP_0_ADC() == 0
TEMP_0_PIN,
@ -160,6 +270,15 @@ uint16_t HAL_adc_result;
#if GET_BUTTONS_ADC() == 0
ADC_KEYPAD_PIN,
#endif
#if GET_JOY_ADC_X() == 0
JOY_X_PIN,
#endif
#if GET_JOY_ADC_Y() == 0
JOY_Y_PIN,
#endif
#if GET_JOY_ADC_Z() == 0
JOY_Z_PIN,
#endif
// ADC1 pins
#if GET_TEMP_0_ADC() == 1
TEMP_0_PIN,
@ -206,15 +325,23 @@ uint16_t HAL_adc_result;
#if GET_BUTTONS_ADC() == 1
ADC_KEYPAD_PIN,
#endif
#if GET_JOY_ADC_X() == 1
JOY_X_PIN,
#endif
#if GET_JOY_ADC_Y() == 1
JOY_Y_PIN,
#endif
#if GET_JOY_ADC_Z() == 1
JOY_Z_PIN,
#endif
};
uint16_t HAL_adc_results[COUNT(adc_pins)];
static uint16_t adc_results[ADC_COUNT];
#if ADC0_IS_REQUIRED
Adafruit_ZeroDMA adc0DMAProgram,
adc0DMARead;
Adafruit_ZeroDMA adc0DMAProgram, adc0DMARead;
const HAL_DMA_DAC_Registers adc0_dma_regs_list[] = {
static constexpr HAL_DMA_DAC_Registers adc0_dma_regs_list[ADC_COUNT] = {
#if GET_TEMP_0_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_0_PIN) },
#endif
@ -260,16 +387,24 @@ uint16_t HAL_adc_result;
#if GET_BUTTONS_ADC() == 0
{ PIN_TO_INPUTCTRL(ADC_KEYPAD_PIN) },
#endif
#if GET_JOY_ADC_X() == 0
{ PIN_TO_INPUTCTRL(JOY_X_PIN) },
#endif
#if GET_JOY_ADC_Y() == 0
{ PIN_TO_INPUTCTRL(JOY_Y_PIN) },
#endif
#if GET_JOY_ADC_Z() == 0
{ PIN_TO_INPUTCTRL(JOY_Z_PIN) },
#endif
};
#define ADC0_AINCOUNT COUNT(adc0_dma_regs_list)
#endif // ADC0_IS_REQUIRED
#if ADC1_IS_REQUIRED
Adafruit_ZeroDMA adc1DMAProgram,
adc1DMARead;
Adafruit_ZeroDMA adc1DMAProgram, adc1DMARead;
const HAL_DMA_DAC_Registers adc1_dma_regs_list[] = {
static constexpr HAL_DMA_DAC_Registers adc1_dma_regs_list[ADC_COUNT] = {
#if GET_TEMP_0_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_0_PIN) },
#endif
@ -315,6 +450,15 @@ uint16_t HAL_adc_result;
#if GET_BUTTONS_ADC() == 1
{ PIN_TO_INPUTCTRL(ADC_KEYPAD_PIN) },
#endif
#if GET_JOY_ADC_X() == 1
{ PIN_TO_INPUTCTRL(JOY_X_PIN) },
#endif
#if GET_JOY_ADC_Y() == 1
{ PIN_TO_INPUTCTRL(JOY_Y_PIN) },
#endif
#if GET_JOY_ADC_Z() == 1
{ PIN_TO_INPUTCTRL(JOY_Z_PIN) },
#endif
};
#define ADC1_AINCOUNT COUNT(adc1_dma_regs_list)
@ -326,9 +470,10 @@ uint16_t HAL_adc_result;
// Private functions
// ------------------------
void MarlinHAL::dma_init() {
#if DMA_IS_REQUIRED
void dma_init() {
DmacDescriptor *descriptor;
#if ADC0_IS_REQUIRED
@ -357,7 +502,7 @@ uint16_t HAL_adc_result;
if (adc0DMARead.allocate() == DMA_STATUS_OK) {
adc0DMARead.addDescriptor(
(void *)&ADC0->RESULT.reg, // SRC
&HAL_adc_results, // DEST
&adc_results, // DEST
ADC0_AINCOUNT, // CNT
DMA_BEAT_SIZE_HWORD,
false, // SRCINC
@ -394,7 +539,7 @@ uint16_t HAL_adc_result;
if (adc1DMARead.allocate() == DMA_STATUS_OK) {
adc1DMARead.addDescriptor(
(void *)&ADC1->RESULT.reg, // SRC
&HAL_adc_results[ADC0_AINCOUNT], // DEST
&adc_results[ADC0_AINCOUNT], // DEST
ADC1_AINCOUNT, // CNT
DMA_BEAT_SIZE_HWORD,
false, // SRCINC
@ -407,16 +552,16 @@ uint16_t HAL_adc_result;
#endif
DMAC->PRICTRL0.bit.RRLVLEN0 = true; // Activate round robin for DMA channels required by ADCs
}
#endif // DMA_IS_REQUIRED
}
// ------------------------
// Public functions
// ------------------------
// HAL initialization task
void HAL_init() {
void MarlinHAL::init() {
TERN_(DMA_IS_REQUIRED, dma_init());
#if ENABLED(SDSUPPORT)
#if SD_CONNECTION_IS(ONBOARD) && PIN_EXISTS(SD_DETECT)
@ -426,17 +571,9 @@ void HAL_init() {
#endif
}
// HAL idle task
/*
void HAL_idletask() {
}
*/
void HAL_clear_reset_source() { }
#pragma push_macro("WDT")
#undef WDT // Required to be able to use '.bit.WDT'. Compiler wrongly replace struct field with WDT define
uint8_t HAL_get_reset_source() {
uint8_t MarlinHAL::get_reset_source() {
RSTC_RCAUSE_Type resetCause;
resetCause.reg = REG_RSTC_RCAUSE;
@ -450,7 +587,7 @@ uint8_t HAL_get_reset_source() {
}
#pragma pop_macro("WDT")
void HAL_reboot() { NVIC_SystemReset(); }
void MarlinHAL::reboot() { NVIC_SystemReset(); }
extern "C" {
void * _sbrk(int incr);
@ -468,9 +605,11 @@ int freeMemory() {
// ADC
// ------------------------
void HAL_adc_init() {
uint16_t MarlinHAL::adc_result;
void MarlinHAL::adc_init() {
#if ADC_IS_REQUIRED
memset(HAL_adc_results, 0xFF, sizeof(HAL_adc_results)); // Fill result with invalid values
memset(adc_results, 0xFF, sizeof(adc_results)); // Fill result with invalid values
LOOP_L_N(pi, COUNT(adc_pins))
pinPeripheral(adc_pins[pi], PIO_ANALOG);
@ -505,17 +644,13 @@ void HAL_adc_init() {
#endif // ADC_IS_REQUIRED
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
void MarlinHAL::adc_start(const pin_t pin) {
#if ADC_IS_REQUIRED
LOOP_L_N(pi, COUNT(adc_pins)) {
if (adc_pin == adc_pins[pi]) {
HAL_adc_result = HAL_adc_results[pi];
return;
}
}
LOOP_L_N(pi, COUNT(adc_pins))
if (pin == adc_pins[pi]) { adc_result = adc_results[pi]; return; }
#endif
HAL_adc_result = 0xFFFF;
adc_result = 0xFFFF;
}
#endif // __SAMD51__

125
Marlin/src/HAL/SAMD51/HAL.h
View File

@ -89,51 +89,30 @@
typedef int8_t pin_t;
#define SHARED_SERVOS HAS_SERVOS
#define HAL_SERVO_LIB Servo
#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp
class Servo;
typedef Servo hal_servo_t;
//
// Interrupts
//
#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (irqon) __enable_irq()
#define cli() __disable_irq() // Disable interrupts
#define sei() __enable_irq() // Enable interrupts
void HAL_clear_reset_source(); // clear reset reason
uint8_t HAL_get_reset_source(); // get reset reason
void HAL_reboot();
//
// ADC
//
extern uint16_t HAL_adc_result; // Most recent ADC conversion
#define HAL_ANALOG_SELECT(pin)
void HAL_adc_init();
//#define HAL_ADC_FILTERED // Disable Marlin's oversampling. The HAL filters ADC values.
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10 // ... 12
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
void HAL_adc_start_conversion(const uint8_t adc_pin);
//
// PWM
//
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
//
// Pin Map
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
@ -142,35 +121,93 @@ inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255,
//
// Tone
//
void toneInit();
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
void noTone(const pin_t _pin);
// Enable hooks into idle and setup for HAL
void HAL_init();
/*
#define HAL_IDLETASK 1
void HAL_idletask();
*/
//
// Utility functions
//
FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
#ifdef __cplusplus
extern "C" {
#endif
char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s);
extern "C" int freeMemory();
#ifdef __cplusplus
}
#endif
#pragma GCC diagnostic pop
// ------------------------
// MarlinHAL Class
// ------------------------
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init(); // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
// Interrupts
static bool isr_state() { return !__get_PRIMASK(); }
static void isr_on() { sei(); }
static void isr_off() { cli(); }
static void delay_ms(const int ms) { delay(ms); }
// Tasks, called from idle()
static void idletask() {}
// Reset
static uint8_t get_reset_source();
static void clear_reset_source() {}
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
static uint16_t adc_result;
// Called by Temperature::init once at startup
static void adc_init();
// Called by Temperature::init for each sensor at startup
static void adc_enable(const uint8_t ch) {}
// Begin ADC sampling on the given channel
static void adc_start(const pin_t pin);
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value() { return adc_result; }
/**
* Set the PWM duty cycle for the pin to the given value.
* No option to invert the duty cycle [default = false]
* No option to change the scale of the provided value to enable finer PWM duty control [default = 255]
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
private:
static void dma_init();
};

28
Marlin/src/HAL/STM32/HAL.cpp
View File

@ -53,16 +53,18 @@
// Public Variables
// ------------------------
uint16_t HAL_adc_result;
uint16_t MarlinHAL::adc_result;
// ------------------------
// Public functions
// ------------------------
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
#if ENABLED(POSTMORTEM_DEBUGGING)
extern void install_min_serial();
#endif
// HAL initialization task
void HAL_init() {
void MarlinHAL::init() {
// Ensure F_CPU is a constant expression.
// If the compiler breaks here, it means that delay code that should compute at compile time will not work.
// So better safe than sorry here.
@ -103,7 +105,7 @@ void HAL_init() {
}
// HAL idle task
void HAL_idletask() {
void MarlinHAL::idletask() {
#if HAS_SHARED_MEDIA
// Stm32duino currently doesn't have a "loop/idle" method
CDC_resume_receive();
@ -111,9 +113,9 @@ void HAL_idletask() {
#endif
}
void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); }
void MarlinHAL::reboot() { NVIC_SystemReset(); }
uint8_t HAL_get_reset_source() {
uint8_t MarlinHAL::get_reset_source() {
return
#ifdef RCC_FLAG_IWDGRST // Some sources may not exist...
RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST) ? RST_WATCHDOG :
@ -137,24 +139,14 @@ uint8_t HAL_get_reset_source() {
;
}
void HAL_reboot() { NVIC_SystemReset(); }
void _delay_ms(const int delay_ms) { delay(delay_ms); }
void MarlinHAL::clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); }
extern "C" {
extern unsigned int _ebss; // end of bss section
}
// ------------------------
// ADC
// ------------------------
// TODO: Make sure this doesn't cause any delay
void HAL_adc_start_conversion(const uint8_t adc_pin) { HAL_adc_result = analogRead(adc_pin); }
uint16_t HAL_adc_get_result() { return HAL_adc_result; }
// Reset the system to initiate a firmware flash
WEAK void flashFirmware(const int16_t) { HAL_reboot(); }
WEAK void flashFirmware(const int16_t) { hal.reboot(); }
// Maple Compatibility
volatile uint32_t systick_uptime_millis = 0;

176
Marlin/src/HAL/STM32/HAL.h
View File

@ -44,9 +44,9 @@
#define CPU_ST7920_DELAY_2 40
#define CPU_ST7920_DELAY_3 340
//
// Serial Ports
//
// ------------------------
// Serial ports
// ------------------------
#ifdef USBCON
#include <USBSerial.h>
#include "../../core/serial_hook.h"
@ -115,17 +115,14 @@
#define analogInputToDigitalPin(p) (p)
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
//
// Interrupts
//
#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (irqon) __enable_irq()
#define cli() __disable_irq()
#define sei() __enable_irq()
// On AVR this is in math.h?
#define square(x) ((x)*(x))
// ------------------------
// Types
// ------------------------
@ -136,56 +133,14 @@
typedef int16_t pin_t;
#endif
#define HAL_SERVO_LIB libServo
class libServo;
typedef libServo hal_servo_t;
#define PAUSE_SERVO_OUTPUT() libServo::pause_all_servos()
#define RESUME_SERVO_OUTPUT() libServo::resume_all_servos()
// ------------------------
// Public Variables
// ------------------------
// result of last ADC conversion
extern uint16_t HAL_adc_result;
// ------------------------
// Public functions
// ------------------------
// Memory related
#define __bss_end __bss_end__
// Enable hooks into setup for HAL
void HAL_init();
#define HAL_IDLETASK 1
void HAL_idletask();
// Clear reset reason
void HAL_clear_reset_source();
// Reset reason
uint8_t HAL_get_reset_source();
void HAL_reboot();
void _delay_ms(const int delay);
extern "C" char* _sbrk(int incr);
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
static inline int freeMemory() {
volatile char top;
return &top - reinterpret_cast<char*>(_sbrk(0));
}
#pragma GCC diagnostic pop
//
// ADC
//
#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT)
// ------------------------
#ifdef ADC_RESOLUTION
#define HAL_ADC_RESOLUTION ADC_RESOLUTION
@ -194,16 +149,10 @@ static inline int freeMemory() {
#endif
#define HAL_ADC_VREF 3.3
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
inline void HAL_adc_init() { analogReadResolution(HAL_ADC_RESOLUTION); }
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
//
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
@ -226,17 +175,92 @@ extern volatile uint32_t systick_uptime_millis;
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
/**
* set_pwm_frequency
* Set the frequency of the timer corresponding to the provided pin
* All Timer PWM pins run at the same frequency
*/
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
// ------------------------
// Class Utilities
// ------------------------
// Memory related
#define __bss_end __bss_end__
extern "C" char* _sbrk(int incr);
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
static inline int freeMemory() {
volatile char top;
return &top - reinterpret_cast<char*>(_sbrk(0));
}
#pragma GCC diagnostic pop
// ------------------------
// MarlinHAL Class
// ------------------------
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init(); // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
// Interrupts
static bool isr_state() { return !__get_PRIMASK(); }
static void isr_on() { sei(); }
static void isr_off() { cli(); }
static void delay_ms(const int ms) { delay(ms); }
// Tasks, called from idle()
static void idletask();
// Reset
static uint8_t get_reset_source();
static void clear_reset_source();
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
static uint16_t adc_result;
// Called by Temperature::init once at startup
static void adc_init() {
analogReadResolution(HAL_ADC_RESOLUTION);
}
// Called by Temperature::init for each sensor at startup
static void adc_enable(const pin_t pin) { pinMode(pin, INPUT); }
// Begin ADC sampling on the given channel
static void adc_start(const pin_t pin) { adc_result = analogRead(pin); }
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value() { return adc_result; }
/**
* set_pwm_duty
* Set the PWM duty cycle of the provided pin to the provided value
* Optionally allows inverting the duty cycle [default = false]
* Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
* Set the PWM duty cycle for the pin to the given value.
* Optionally invert the duty cycle [default = false]
* Optionally change the maximum size of the provided value to enable finer PWM duty control [default = 255]
*/
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
/**
* Set the frequency of the timer for the given pin.
* All Timer PWM pins run at the same frequency.
*/
static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
};

8
Marlin/src/HAL/STM32/HAL_SPI.cpp
View File

@ -102,9 +102,9 @@ static SPISettings spiConfig;
// Soft SPI receive byte
uint8_t spiRec() {
DISABLE_ISRS(); // No interrupts during byte receive
hal.isr_off(); // No interrupts during byte receive
const uint8_t data = HAL_SPI_STM32_SpiTransfer_Mode_3(0xFF);
ENABLE_ISRS(); // Enable interrupts
hal.isr_on(); // Enable interrupts
return data;
}
@ -116,9 +116,9 @@ static SPISettings spiConfig;
// Soft SPI send byte
void spiSend(uint8_t data) {
DISABLE_ISRS(); // No interrupts during byte send
hal.isr_off(); // No interrupts during byte send
HAL_SPI_STM32_SpiTransfer_Mode_3(data); // Don't care what is received
ENABLE_ISRS(); // Enable interrupts
hal.isr_on(); // Enable interrupts
}
// Soft SPI send block

8
Marlin/src/HAL/STM32/eeprom_flash.cpp
View File

@ -174,9 +174,9 @@ bool PersistentStore::access_finish() {
UNLOCK_FLASH();
TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT());
DISABLE_ISRS();
hal.isr_off();
status = HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError);
ENABLE_ISRS();
hal.isr_on();
TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
if (status != HAL_OK) {
DEBUG_ECHOLNPGM("HAL_FLASHEx_Erase=", status);
@ -229,9 +229,9 @@ bool PersistentStore::access_finish() {
// output. Servo output still glitches with interrupts disabled, but recovers after the
// erase.
TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT());
DISABLE_ISRS();
hal.isr_off();
eeprom_buffer_flush();
ENABLE_ISRS();
hal.isr_on();
TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
eeprom_data_written = false;

4
Marlin/src/HAL/STM32/fast_pwm.cpp
View File

@ -29,7 +29,7 @@
// Array to support sticky frequency sets per timer
static uint16_t timer_freq[TIMER_NUM];
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
const uint16_t duty = invert ? v_size - v : v;
if (PWM_PIN(pin)) {
const PinName pin_name = digitalPinToPinName(pin);
@ -61,7 +61,7 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
}
}
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
if (!PWM_PIN(pin)) return; // Don't proceed if no hardware timer
const PinName pin_name = digitalPinToPinName(pin);
TIM_TypeDef * const Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM); // Get HAL timer instance

6
Marlin/src/HAL/STM32/pinsDebug.h
View File

@ -115,7 +115,6 @@ const XrefInfo pin_xref[] PROGMEM = {
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PORT(ANUM) port_print(ANUM)
#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1 // will report analog pin number in the print port routine
#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num
// x is a variable used to search pin_array
#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
@ -123,6 +122,11 @@ const XrefInfo pin_xref[] PROGMEM = {
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin
//
// Pin Mapping for M43
//
#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num
#ifndef M43_NEVER_TOUCH
#define _M43_NEVER_TOUCH(Index) (Index >= 9 && Index <= 12) // SERIAL/USB pins: PA9(TX) PA10(RX) PA11(USB_DM) PA12(USB_DP)
#ifdef KILL_PIN

4
Marlin/src/HAL/STM32/timers.h
View File

@ -116,5 +116,5 @@ FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const ha
}
}
#define HAL_timer_isr_prologue(T)
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_prologue(T) NOOP
#define HAL_timer_isr_epilogue(T) NOOP

183
Marlin/src/HAL/STM32F1/HAL.cpp
View File

@ -79,7 +79,7 @@
#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
// ------------------------
// Public Variables
// Serial ports
// ------------------------
#if defined(SERIAL_USB) && !HAS_SD_HOST_DRIVE
@ -112,74 +112,37 @@
#endif
#endif
uint16_t HAL_adc_result;
// ------------------------
// Private Variables
// ADC
// ------------------------
STM32ADC adc(ADC1);
const uint8_t adc_pins[] = {
OPTITEM(HAS_TEMP_ADC_0, TEMP_0_PIN)
OPTITEM(HAS_TEMP_ADC_1, TEMP_1_PIN)
OPTITEM(HAS_TEMP_ADC_2, TEMP_2_PIN)
OPTITEM(HAS_TEMP_ADC_3, TEMP_3_PIN)
OPTITEM(HAS_TEMP_ADC_4, TEMP_4_PIN)
OPTITEM(HAS_TEMP_ADC_5, TEMP_5_PIN)
OPTITEM(HAS_TEMP_ADC_6, TEMP_6_PIN)
OPTITEM(HAS_TEMP_ADC_7, TEMP_7_PIN)
OPTITEM(HAS_HEATED_BED, TEMP_BED_PIN)
OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN)
OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN)
OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER_PIN)
OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD_PIN)
OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN)
OPTITEM(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN)
OPTITEM(HAS_JOY_ADC_X, JOY_X_PIN)
OPTITEM(HAS_JOY_ADC_Y, JOY_Y_PIN)
OPTITEM(HAS_JOY_ADC_Z, JOY_Z_PIN)
OPTITEM(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN)
OPTITEM(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN)
};
// Watch out for recursion here! Our pin_t is signed, so pass through to Arduino -> analogRead(uint8_t)
enum TempPinIndex : char {
OPTITEM(HAS_TEMP_ADC_0, TEMP_0)
OPTITEM(HAS_TEMP_ADC_1, TEMP_1)
OPTITEM(HAS_TEMP_ADC_2, TEMP_2)
OPTITEM(HAS_TEMP_ADC_3, TEMP_3)
OPTITEM(HAS_TEMP_ADC_4, TEMP_4)
OPTITEM(HAS_TEMP_ADC_5, TEMP_5)
OPTITEM(HAS_TEMP_ADC_6, TEMP_6)
OPTITEM(HAS_TEMP_ADC_7, TEMP_7)
OPTITEM(HAS_HEATED_BED, TEMP_BED)
OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER)
OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE)
OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER)
OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD)
OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH)
OPTITEM(HAS_ADC_BUTTONS, ADC_KEY)
OPTITEM(HAS_JOY_ADC_X, JOY_X)
OPTITEM(HAS_JOY_ADC_Y, JOY_Y)
OPTITEM(HAS_JOY_ADC_Z, JOY_Z)
OPTITEM(POWER_MONITOR_CURRENT, POWERMON_CURRENT)
OPTITEM(POWER_MONITOR_VOLTAGE, POWERMON_VOLTS)
ADC_PIN_COUNT
};
uint16_t analogRead(const pin_t pin) {
const bool is_analog = _GET_MODE(pin) == GPIO_INPUT_ANALOG;
return is_analog ? analogRead(uint8_t(pin)) : 0;
}
uint16_t HAL_adc_results[ADC_PIN_COUNT];
// Wrapper to maple unprotected analogWrite
void analogWrite(const pin_t pin, int pwm_val8) {
if (PWM_PIN(pin)) analogWrite(uint8_t(pin), pwm_val8);
}
uint16_t MarlinHAL::adc_result;
// ------------------------
// Private functions
// ------------------------
static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
uint32_t reg_value;
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); // only values 0..7 are used
reg_value = SCB->AIRCR; /* read old register configuration */
reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
reg_value = SCB->AIRCR; // read old register configuration
reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); // clear bits to change
reg_value = (reg_value |
((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
(PriorityGroupTmp << 8)); /* Insert write key & priority group */
(PriorityGroupTmp << 8)); // Insert write key & priority group
SCB->AIRCR = reg_value;
}
@ -187,6 +150,8 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
// Public functions
// ------------------------
void flashFirmware(const int16_t) { hal.reboot(); }
//
// Leave PA11/PA12 intact if USBSerial is not used
//
@ -206,7 +171,11 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
void HAL_init() {
// ------------------------
// MarlinHAL class
// ------------------------
void MarlinHAL::init() {
NVIC_SetPriorityGrouping(0x3);
#if PIN_EXISTS(LED)
OUT_WRITE(LED_PIN, LOW);
@ -225,7 +194,7 @@ void HAL_init() {
}
// HAL idle task
void HAL_idletask() {
void MarlinHAL::idletask() {
#if HAS_SHARED_MEDIA
// If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB.
@ -240,14 +209,7 @@ void HAL_idletask() {
#endif
}
void HAL_clear_reset_source() { }
/**
* TODO: Check this and change or remove.
*/
uint8_t HAL_get_reset_source() { return RST_POWER_ON; }
void _delay_ms(const int delay_ms) { delay(delay_ms); }
void MarlinHAL::reboot() { nvic_sys_reset(); }
extern "C" {
extern unsigned int _ebss; // end of bss section
@ -281,31 +243,76 @@ extern "C" {
}
*/
// ------------------------
//
// ADC
// ------------------------
//
enum ADCIndex : uint8_t {
OPTITEM(HAS_TEMP_ADC_0, TEMP_0)
OPTITEM(HAS_TEMP_ADC_1, TEMP_1)
OPTITEM(HAS_TEMP_ADC_2, TEMP_2)
OPTITEM(HAS_TEMP_ADC_3, TEMP_3)
OPTITEM(HAS_TEMP_ADC_4, TEMP_4)
OPTITEM(HAS_TEMP_ADC_5, TEMP_5)
OPTITEM(HAS_TEMP_ADC_6, TEMP_6)
OPTITEM(HAS_TEMP_ADC_7, TEMP_7)
OPTITEM(HAS_HEATED_BED, TEMP_BED)
OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER)
OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE)
OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER)
OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD)
OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH)
OPTITEM(HAS_ADC_BUTTONS, ADC_KEY)
OPTITEM(HAS_JOY_ADC_X, JOY_X)
OPTITEM(HAS_JOY_ADC_Y, JOY_Y)
OPTITEM(HAS_JOY_ADC_Z, JOY_Z)
OPTITEM(POWER_MONITOR_CURRENT, POWERMON_CURRENT)
OPTITEM(POWER_MONITOR_VOLTAGE, POWERMON_VOLTS)
ADC_COUNT
};
static uint16_t adc_results[ADC_COUNT];
// Init the AD in continuous capture mode
void HAL_adc_init() {
void MarlinHAL::adc_init() {
static const uint8_t adc_pins[] = {
OPTITEM(HAS_TEMP_ADC_0, TEMP_0_PIN)
OPTITEM(HAS_TEMP_ADC_1, TEMP_1_PIN)
OPTITEM(HAS_TEMP_ADC_2, TEMP_2_PIN)
OPTITEM(HAS_TEMP_ADC_3, TEMP_3_PIN)
OPTITEM(HAS_TEMP_ADC_4, TEMP_4_PIN)
OPTITEM(HAS_TEMP_ADC_5, TEMP_5_PIN)
OPTITEM(HAS_TEMP_ADC_6, TEMP_6_PIN)
OPTITEM(HAS_TEMP_ADC_7, TEMP_7_PIN)
OPTITEM(HAS_HEATED_BED, TEMP_BED_PIN)
OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN)
OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN)
OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER_PIN)
OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD_PIN)
OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN)
OPTITEM(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN)
OPTITEM(HAS_JOY_ADC_X, JOY_X_PIN)
OPTITEM(HAS_JOY_ADC_Y, JOY_Y_PIN)
OPTITEM(HAS_JOY_ADC_Z, JOY_Z_PIN)
OPTITEM(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN)
OPTITEM(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN)
};
static STM32ADC adc(ADC1);
// configure the ADC
adc.calibrate();
#if F_CPU > 72000000
adc.setSampleRate(ADC_SMPR_71_5); // 71.5 ADC cycles
#else
adc.setSampleRate(ADC_SMPR_41_5); // 41.5 ADC cycles
#endif
adc.setPins((uint8_t *)adc_pins, ADC_PIN_COUNT);
adc.setDMA(HAL_adc_results, (uint16_t)ADC_PIN_COUNT, (uint32_t)(DMA_MINC_MODE | DMA_CIRC_MODE), nullptr);
adc.setSampleRate((F_CPU > 72000000) ? ADC_SMPR_71_5 : ADC_SMPR_41_5); // 71.5 or 41.5 ADC cycles
adc.setPins((uint8_t *)adc_pins, ADC_COUNT);
adc.setDMA(adc_results, uint16_t(ADC_COUNT), uint32_t(DMA_MINC_MODE | DMA_CIRC_MODE), nullptr);
adc.setScanMode();
adc.setContinuous();
adc.startConversion();
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
void MarlinHAL::adc_start(const pin_t pin) {
#define __TCASE(N,I) case N: pin_index = I; break;
#define _TCASE(C,N,I) TERN_(C, __TCASE(N, I))
//TEMP_PINS pin_index;
TempPinIndex pin_index;
switch (adc_pin) {
ADCIndex pin_index;
switch (pin) {
default: return;
_TCASE(HAS_TEMP_ADC_0, TEMP_0_PIN, TEMP_0)
_TCASE(HAS_TEMP_ADC_1, TEMP_1_PIN, TEMP_1)
@ -328,23 +335,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
_TCASE(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN, POWERMON_CURRENT)
_TCASE(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN, POWERMON_VOLTS)
}
HAL_adc_result = HAL_adc_results[(int)pin_index] >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits
adc_result = (adc_results[(int)pin_index] & 0xFFF) >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits
}
uint16_t HAL_adc_get_result() { return HAL_adc_result; }
uint16_t analogRead(pin_t pin) {
const bool is_analog = _GET_MODE(pin) == GPIO_INPUT_ANALOG;
return is_analog ? analogRead(uint8_t(pin)) : 0;
}
// Wrapper to maple unprotected analogWrite
void analogWrite(pin_t pin, int pwm_val8) {
if (PWM_PIN(pin)) analogWrite(uint8_t(pin), pwm_val8);
}
void HAL_reboot() { nvic_sys_reset(); }
void flashFirmware(const int16_t) { HAL_reboot(); }
#endif // __STM32F1__

186
Marlin/src/HAL/STM32F1/HAL.h
View File

@ -66,6 +66,10 @@
#endif
#endif
// ------------------------
// Serial ports
// ------------------------
#ifdef SERIAL_USB
typedef ForwardSerial1Class< USBSerial > DefaultSerial1;
extern DefaultSerial1 MSerial0;
@ -141,11 +145,6 @@
#endif
#endif
// Set interrupt grouping for this MCU
void HAL_init();
#define HAL_IDLETASK 1
void HAL_idletask();
/**
* TODO: review this to return 1 for pins that are not analog input
*/
@ -158,15 +157,7 @@ void HAL_idletask();
#define NO_COMPILE_TIME_PWM
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); (void)__iCliRetVal()
#define CRITICAL_SECTION_END() if (!primask) (void)__iSeiRetVal()
#define ISRS_ENABLED() (!__get_primask())
#define ENABLE_ISRS() ((void)__iSeiRetVal())
#define DISABLE_ISRS() ((void)__iCliRetVal())
// On AVR this is in math.h?
#define square(x) ((x)*(x))
// Reset Reason
#define RST_POWER_ON 1
#define RST_EXTERNAL 2
#define RST_BROWN_OUT 4
@ -182,60 +173,17 @@ void HAL_idletask();
typedef int8_t pin_t;
// ------------------------
// Public Variables
// Interrupts
// ------------------------
// Result of last ADC conversion
extern uint16_t HAL_adc_result;
// ------------------------
// Public functions
// ------------------------
// Disable interrupts
#define CRITICAL_SECTION_START() const bool irqon = !__get_primask(); (void)__iCliRetVal()
#define CRITICAL_SECTION_END() if (!irqon) (void)__iSeiRetVal()
#define cli() noInterrupts()
// Enable interrupts
#define sei() interrupts()
// Memory related
#define __bss_end __bss_end__
// Clear reset reason
void HAL_clear_reset_source();
// Reset reason
uint8_t HAL_get_reset_source();
void HAL_reboot();
void _delay_ms(const int delay);
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
/*
extern "C" {
int freeMemory();
}
*/
extern "C" char* _sbrk(int incr);
static inline int freeMemory() {
volatile char top;
return &top - _sbrk(0);
}
#pragma GCC diagnostic pop
//
// ------------------------
// ADC
//
#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT_ANALOG);
void HAL_adc_init();
// ------------------------
#ifdef ADC_RESOLUTION
#define HAL_ADC_RESOLUTION ADC_RESOLUTION
@ -244,16 +192,13 @@ void HAL_adc_init();
#endif
#define HAL_ADC_VREF 3.3
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
uint16_t analogRead(pin_t pin); // need HAL_ANALOG_SELECT() first
void analogWrite(pin_t pin, int pwm_val8); // PWM only! mul by 257 in maple!?
uint16_t analogRead(const pin_t pin); // need hal.adc_enable() first
void analogWrite(const pin_t pin, int pwm_val8); // PWM only! mul by 257 in maple!?
//
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
@ -264,23 +209,98 @@ void analogWrite(pin_t pin, int pwm_val8); // PWM only! mul by 257 in maple!?
#define PLATFORM_M997_SUPPORT
void flashFirmware(const int16_t);
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
#ifndef PWM_FREQUENCY
#define PWM_FREQUENCY 1000 // Default PWM Frequency
#endif
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
// ------------------------
// Class Utilities
// ------------------------
// Memory related
#define __bss_end __bss_end__
void _delay_ms(const int ms);
extern "C" char* _sbrk(int incr);
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
static inline int freeMemory() {
volatile char top;
return &top - _sbrk(0);
}
#pragma GCC diagnostic pop
// ------------------------
// MarlinHAL Class
// ------------------------
class MarlinHAL {
public:
// Earliest possible init, before setup()
MarlinHAL() {}
static void init(); // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
// Interrupts
static bool isr_state() { return !__get_primask(); }
static void isr_on() { ((void)__iSeiRetVal()); }
static void isr_off() { ((void)__iCliRetVal()); }
static void delay_ms(const int ms) { delay(ms); }
// Tasks, called from idle()
static void idletask();
// Reset
static uint8_t get_reset_source() { return RST_POWER_ON; }
static void clear_reset_source() {}
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
static uint16_t adc_result;
// Called by Temperature::init once at startup
static void adc_init();
// Called by Temperature::init for each sensor at startup
static void adc_enable(const pin_t pin) { pinMode(pin, INPUT_ANALOG); }
// Begin ADC sampling on the given channel
static void adc_start(const pin_t pin);
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value() { return adc_result; }
/**
* set_pwm_frequency
* Set the frequency of the timer corresponding to the provided pin
* All Timer PWM pins run at the same frequency
*/
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
/**
* set_pwm_duty
* Set the PWM duty cycle of the provided pin to the provided value
* Optionally allows inverting the duty cycle [default = false]
* Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
* Set the PWM duty cycle for the pin to the given value.
* Optionally invert the duty cycle [default = false]
* Optionally change the maximum size of the provided value to enable finer PWM duty control [default = 255]
* The timer must be pre-configured with set_pwm_frequency() if the default frequency is not desired.
*/
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false);
/**
* Set the frequency of the timer for the given pin.
* All Timer PWM pins run at the same frequency.
*/
static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
};

8
Marlin/src/HAL/STM32F1/SPI.cpp
View File

@ -91,6 +91,14 @@ static const spi_pins board_spi_pins[] __FLASH__ = {
static void *_spi3_this;
#endif
/**
* @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.
*/
static inline void waitSpiTxEnd(spi_dev *spi_d) {
while (spi_is_tx_empty(spi_d) == 0) { /* nada */ } // wait until TXE=1
while (spi_is_busy(spi_d) != 0) { /* nada */ } // wait until BSY=0
}
/**
* Constructor
*/

8
Marlin/src/HAL/STM32F1/SPI.h
View File

@ -414,12 +414,4 @@ private:
*/
};
/**
* @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.
*/
static void waitSpiTxEnd(spi_dev *spi_d) {
while (spi_is_tx_empty(spi_d) == 0) { /* nada */ } // wait until TXE=1
while (spi_is_busy(spi_d) != 0) { /* nada */ } // wait until BSY=0
}
extern SPIClass SPI;

3
Marlin/src/HAL/STM32F1/Servo.h
View File

@ -35,7 +35,8 @@
#define SERVO_DEFAULT_MIN_ANGLE 0
#define SERVO_DEFAULT_MAX_ANGLE 180
#define HAL_SERVO_LIB libServo
class libServo;
typedef libServo hal_servo_t;
class libServo {
public:

8
Marlin/src/HAL/STM32F1/fast_pwm.cpp
View File

@ -21,11 +21,9 @@
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfigPre.h"
#include "../../inc/MarlinConfig.h"
#include <pwm.h>
#include "HAL.h"
#include "timers.h"
#define NR_TIMERS TERN(STM32_XL_DENSITY, 14, 8) // Maple timers, 14 for STM32_XL_DENSITY (F/G chips), 8 for HIGH density (C D E)
@ -38,7 +36,7 @@ inline uint8_t timer_and_index_for_pin(const pin_t pin, timer_dev **timer_ptr) {
return 0;
}
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
const uint16_t duty = invert ? v_size - v : v;
if (PWM_PIN(pin)) {
timer_dev *timer; UNUSED(timer);
@ -54,7 +52,7 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
}
}
void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
if (!PWM_PIN(pin)) return; // Don't proceed if no hardware timer
timer_dev *timer; UNUSED(timer);

2
Marlin/src/HAL/STM32F1/timers.h
View File

@ -188,7 +188,7 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
}
}
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_epilogue(T) NOOP
// No command is available in framework to turn off ARPE bit, which is turned on by default in libmaple.
// Needed here to reset ARPE=0 for stepper timer

85
Marlin/src/HAL/TEENSY31_32/HAL.cpp
View File

@ -31,6 +31,10 @@
#include <Wire.h>
// ------------------------
// Serial ports
// ------------------------
#define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X)
#define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X)
#if WITHIN(SERIAL_PORT, 0, 3)
@ -40,45 +44,9 @@
#endif
USBSerialType USBSerial(false, SerialUSB);
uint16_t HAL_adc_result;
static const uint8_t pin2sc1a[] = {
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 0, 19, 3, 31, // 0-13, we treat them as A0-A13
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 (A0-A9)
31, 31, 31, 31, 31, 31, 31, 31, 31, 31, // 24-33
0+64, 19+64, 3+64, 31+64, // 34-37 (A10-A13)
26, 22, 23, 27, 29, 30 // 38-43: temp. sensor, VREF_OUT, A14, bandgap, VREFH, VREFL. A14 isn't connected to anything in Teensy 3.0.
};
/*
// disable interrupts
void cli() { noInterrupts(); }
// enable interrupts
void sei() { interrupts(); }
*/
void HAL_adc_init() {
analog_init();
while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
NVIC_ENABLE_IRQ(IRQ_FTM1);
}
void HAL_clear_reset_source() { }
uint8_t HAL_get_reset_source() {
switch (RCM_SRS0) {
case 128: return RST_POWER_ON; break;
case 64: return RST_EXTERNAL; break;
case 32: return RST_WATCHDOG; break;
// case 8: return RST_LOSS_OF_LOCK; break;
// case 4: return RST_LOSS_OF_CLOCK; break;
// case 2: return RST_LOW_VOLTAGE; break;
}
return 0;
}
void HAL_reboot() { _reboot_Teensyduino_(); }
// ------------------------
// Class Utilities
// ------------------------
extern "C" {
extern char __bss_end;
@ -95,8 +63,43 @@ extern "C" {
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) { ADC0_SC1A = pin2sc1a[adc_pin]; }
// ------------------------
// MarlinHAL Class
// ------------------------
uint16_t HAL_adc_get_result() { return ADC0_RA; }
void MarlinHAL::reboot() { _reboot_Teensyduino_(); }
uint8_t MarlinHAL::get_reset_source() {
switch (RCM_SRS0) {
case 128: return RST_POWER_ON; break;
case 64: return RST_EXTERNAL; break;
case 32: return RST_WATCHDOG; break;
// case 8: return RST_LOSS_OF_LOCK; break;
// case 4: return RST_LOSS_OF_CLOCK; break;
// case 2: return RST_LOW_VOLTAGE; break;
}
return 0;
}
// ADC
void MarlinHAL::adc_init() {
analog_init();
while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
NVIC_ENABLE_IRQ(IRQ_FTM1);
}
void MarlinHAL::adc_start(const pin_t pin) {
static const uint8_t pin2sc1a[] = {
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 0, 19, 3, 31, // 0-13, we treat them as A0-A13
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 (A0-A9)
31, 31, 31, 31, 31, 31, 31, 31, 31, 31, // 24-33
0+64, 19+64, 3+64, 31+64, // 34-37 (A10-A13)
26, 22, 23, 27, 29, 30 // 38-43: temp. sensor, VREF_OUT, A14, bandgap, VREFH, VREFL. A14 isn't connected to anything in Teensy 3.0.
};
ADC0_SC1A = pin2sc1a[pin];
}
uint16_t MarlinHAL::adc_value() { return ADC0_RA; }
#endif // __MK20DX256__

130
Marlin/src/HAL/TEENSY31_32/HAL.h
View File

@ -36,12 +36,9 @@
#include <stdint.h>
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
//#undef MOTHERBOARD
//#define MOTHERBOARD BOARD_TEENSY31_32
// ------------------------
// Defines
// ------------------------
#define IS_32BIT_TEENSY 1
#define IS_TEENSY_31_32 1
@ -49,6 +46,14 @@
#define IS_TEENSY32 1
#endif
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Serial ports
// ------------------------
#include "../../core/serial_hook.h"
#define Serial0 Serial
@ -72,31 +77,44 @@ extern USBSerialType USBSerial;
#error "The required SERIAL_PORT must be from 0 to 3, or -1 for Native USB."
#endif
#define HAL_SERVO_LIB libServo
// ------------------------
// Types
// ------------------------
class libServo;
typedef libServo hal_servo_t;
typedef int8_t pin_t;
// ------------------------
// Interrupts
// ------------------------
uint32_t __get_PRIMASK(void); // CMSIS
#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (irqon) __enable_irq()
// ------------------------
// ADC
// ------------------------
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
inline void HAL_init() {}
//
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Clear the reset reason
void HAL_clear_reset_source();
// Get the reason for the reset
uint8_t HAL_get_reset_source();
void HAL_reboot();
FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
@ -107,27 +125,63 @@ extern "C" int freeMemory();
#pragma GCC diagnostic pop
// ADC
// ------------------------
// MarlinHAL Class
// ------------------------
void HAL_adc_init();
class MarlinHAL {
public:
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
// Earliest possible init, before setup()
MarlinHAL() {}
#define HAL_ANALOG_SELECT(pin)
static void init() {} // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
// Interrupts
static bool isr_state() { return !__get_PRIMASK(); }
static void isr_on() { __enable_irq(); }
static void isr_off() { __disable_irq(); }
// PWM
static void delay_ms(const int ms) { delay(ms); }
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
// Tasks, called from idle()
static void idletask() {}
// Pin Map
// Reset
static uint8_t get_reset_source();
static void clear_reset_source() {}
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
// Called by Temperature::init once at startup
static void adc_init();
// Called by Temperature::init for each sensor at startup
static void adc_enable(const pin_t ch) {}
// Begin ADC sampling on the given channel
static void adc_start(const pin_t ch);
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value();
/**
* Set the PWM duty cycle for the pin to the given value.
* No option to invert the duty cycle [default = false]
* No option to change the scale of the provided value to enable finer PWM duty control [default = 255]
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
};

2
Marlin/src/HAL/TEENSY31_32/timers.h
View File

@ -110,4 +110,4 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
void HAL_timer_isr_prologue(const uint8_t timer_num);
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_epilogue(T) NOOP

114
Marlin/src/HAL/TEENSY35_36/HAL.cpp
View File

@ -31,6 +31,10 @@
#include <Wire.h>
// ------------------------
// Serial ports
// ------------------------
#define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X)
#define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X)
#if WITHIN(SERIAL_PORT, 0, 3)
@ -39,54 +43,9 @@
USBSerialType USBSerial(false, SerialUSB);
uint16_t HAL_adc_result, HAL_adc_select;
static const uint8_t pin2sc1a[] = {
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 3, 19+128, 14+128, 15+128, // 0-13 -> A0-A13
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 are A0-A9
255, 255, 255, 255, 255, 255, 255, // 24-30 are digital only
14+128, 15+128, 17, 18, 4+128, 5+128, 6+128, 7+128, 17+128, // 31-39 are A12-A20
255, 255, 255, 255, 255, 255, 255, 255, 255, // 40-48 are digital only
10+128, 11+128, // 49-50 are A23-A24
255, 255, 255, 255, 255, 255, 255, // 51-57 are digital only
255, 255, 255, 255, 255, 255, // 58-63 (sd card pins) are digital only
3, 19+128, // 64-65 are A10-A11
23, 23+128,// 66-67 are A21-A22 (DAC pins)
1, 1+128, // 68-69 are A25-A26 (unused USB host port on Teensy 3.5)
26, // 70 is Temperature Sensor
18+128 // 71 is Vref
};
/*
// disable interrupts
void cli() { noInterrupts(); }
// enable interrupts
void sei() { interrupts(); }
*/
void HAL_adc_init() {
analog_init();
while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
while (ADC1_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
NVIC_ENABLE_IRQ(IRQ_FTM1);
}
void HAL_clear_reset_source() { }
uint8_t HAL_get_reset_source() {
switch (RCM_SRS0) {
case 128: return RST_POWER_ON; break;
case 64: return RST_EXTERNAL; break;
case 32: return RST_WATCHDOG; break;
// case 8: return RST_LOSS_OF_LOCK; break;
// case 4: return RST_LOSS_OF_CLOCK; break;
// case 2: return RST_LOW_VOLTAGE; break;
}
return 0;
}
void HAL_reboot() { _reboot_Teensyduino_(); }
// ------------------------
// Class Utilities
// ------------------------
extern "C" {
extern char __bss_end;
@ -103,24 +62,69 @@ extern "C" {
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
// ------------------------
// MarlinHAL Class
// ------------------------
void MarlinHAL::reboot() { _reboot_Teensyduino_(); }
// Reset
uint8_t MarlinHAL::get_reset_source() {
switch (RCM_SRS0) {
case 128: return RST_POWER_ON; break;
case 64: return RST_EXTERNAL; break;
case 32: return RST_WATCHDOG; break;
// case 8: return RST_LOSS_OF_LOCK; break;
// case 4: return RST_LOSS_OF_CLOCK; break;
// case 2: return RST_LOW_VOLTAGE; break;
}
return 0;
}
// ADC
int8_t MarlinHAL::adc_select;
void MarlinHAL::adc_init() {
analog_init();
while (ADC0_SC3 & ADC_SC3_CAL) { /* Wait for calibration to finish */ }
while (ADC1_SC3 & ADC_SC3_CAL) { /* Wait for calibration to finish */ }
NVIC_ENABLE_IRQ(IRQ_FTM1);
}
void MarlinHAL::adc_start(const pin_t adc_pin) {
static const uint8_t pin2sc1a[] = {
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 3, 19+128, 14+128, 15+128, // 0-13 -> A0-A13
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 are A0-A9
255, 255, 255, 255, 255, 255, 255, // 24-30 are digital only
14+128, 15+128, 17, 18, 4+128, 5+128, 6+128, 7+128, 17+128, // 31-39 are A12-A20
255, 255, 255, 255, 255, 255, 255, 255, 255, // 40-48 are digital only
10+128, 11+128, // 49-50 are A23-A24
255, 255, 255, 255, 255, 255, 255, // 51-57 are digital only
255, 255, 255, 255, 255, 255, // 58-63 (sd card pins) are digital only
3, 19+128, // 64-65 are A10-A11
23, 23+128,// 66-67 are A21-A22 (DAC pins)
1, 1+128, // 68-69 are A25-A26 (unused USB host port on Teensy 3.5)
26, // 70 is Temperature Sensor
18+128 // 71 is Vref
};
const uint16_t pin = pin2sc1a[adc_pin];
if (pin == 0xFF) {
// Digital only
HAL_adc_select = -1;
adc_select = -1; // Digital only
}
else if (pin & 0x80) {
HAL_adc_select = 1;
adc_select = 1;
ADC1_SC1A = pin & 0x7F;
}
else {
HAL_adc_select = 0;
adc_select = 0;
ADC0_SC1A = pin;
}
}
uint16_t HAL_adc_get_result() {
switch (HAL_adc_select) {
uint16_t MarlinHAL::adc_value() {
switch (adc_select) {
case 0: return ADC0_RA;
case 1: return ADC1_RA;
}

132
Marlin/src/HAL/TEENSY35_36/HAL.h
View File

@ -37,10 +37,6 @@
#include <stdint.h>
#include <util/atomic.h>
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Defines
// ------------------------
@ -53,6 +49,17 @@
#define IS_TEENSY35 1
#endif
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
#undef sq
#define sq(x) ((x)*(x))
// ------------------------
// Serial ports
// ------------------------
#include "../../core/serial_hook.h"
#define Serial0 Serial
@ -76,34 +83,43 @@ extern USBSerialType USBSerial;
#error "SERIAL_PORT must be from 0 to 3, or -1 for Native USB."
#endif
#define HAL_SERVO_LIB libServo
// ------------------------
// Types
// ------------------------
class libServo;
typedef libServo hal_servo_t;
typedef int8_t pin_t;
// ------------------------
// Interrupts
// ------------------------
#define CRITICAL_SECTION_START() const bool irqon = !__get_primask(); __disable_irq()
#define CRITICAL_SECTION_END() if (irqon) __enable_irq()
// ------------------------
// ADC
// ------------------------
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_primask())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#undef sq
#define sq(x) ((x)*(x))
//
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
inline void HAL_init() {}
// Clear reset reason
void HAL_clear_reset_source();
// Reset reason
uint8_t HAL_get_reset_source();
void HAL_reboot();
FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
@ -114,27 +130,65 @@ extern "C" int freeMemory();
#pragma GCC diagnostic pop
// ADC
// ------------------------
// MarlinHAL Class
// ------------------------
void HAL_adc_init();
class MarlinHAL {
public:
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
// Earliest possible init, before setup()
MarlinHAL() {}
#define HAL_ANALOG_SELECT(pin)
static void init() {} // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
// Interrupts
static bool isr_state() { return true; }
static void isr_on() { __enable_irq(); }
static void isr_off() { __disable_irq(); }
// PWM
static void delay_ms(const int ms) { delay(ms); }
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
// Tasks, called from idle()
static void idletask() {}
// Pin Map
// Reset
static uint8_t get_reset_source();
static void clear_reset_source() {}
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
//
// ADC Methods
//
static int8_t adc_select;
// Called by Temperature::init once at startup
static void adc_init();
// Called by Temperature::init for each sensor at startup
static void adc_enable(const pin_t) {}
// Begin ADC sampling on the given channel
static void adc_start(const pin_t pin);
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value();
/**
* Set the PWM duty cycle for the pin to the given value.
* No option to invert the duty cycle [default = false]
* No option to change the scale of the provided value to enable finer PWM duty control [default = 255]
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
};

2
Marlin/src/HAL/TEENSY35_36/timers.h
View File

@ -109,4 +109,4 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
void HAL_timer_isr_prologue(const uint8_t timer_num);
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_epilogue(T) NOOP

142
Marlin/src/HAL/TEENSY40_41/HAL.cpp
View File

@ -33,6 +33,10 @@
#include "timers.h"
#include <Wire.h>
// ------------------------
// Serial ports
// ------------------------
#define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X)
#define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X)
#if WITHIN(SERIAL_PORT, 0, 3)
@ -40,8 +44,70 @@
#endif
USBSerialType USBSerial(false, SerialUSB);
uint16_t HAL_adc_result, HAL_adc_select;
// ------------------------
// Class Utilities
// ------------------------
#define __bss_end _ebss
extern "C" {
extern char __bss_end;
extern char __heap_start;
extern void* __brkval;
// Doesn't work on Teensy 4.x
uint32_t freeMemory() {
uint32_t free_memory;
free_memory = ((uint32_t)&free_memory) - (((uint32_t)__brkval) ?: ((uint32_t)&__bss_end));
return free_memory;
}
}
// ------------------------
// FastIO
// ------------------------
bool is_output(pin_t pin) {
const struct digital_pin_bitband_and_config_table_struct *p;
p = digital_pin_to_info_PGM + pin;
return (*(p->reg + 1) & p->mask);
}
// ------------------------
// MarlinHAL Class
// ------------------------
void MarlinHAL::reboot() { _reboot_Teensyduino_(); }
uint8_t MarlinHAL::get_reset_source() {
switch (SRC_SRSR & 0xFF) {
case 1: return RST_POWER_ON; break;
case 2: return RST_SOFTWARE; break;
case 4: return RST_EXTERNAL; break;
//case 8: return RST_BROWN_OUT; break;
case 16: return RST_WATCHDOG; break;
case 64: return RST_JTAG; break;
//case 128: return RST_OVERTEMP; break;
}
return 0;
}
void MarlinHAL::clear_reset_source() {
uint32_t reset_source = SRC_SRSR;
SRC_SRSR = reset_source;
}
// ADC
int8_t MarlinHAL::adc_select;
void MarlinHAL::adc_init() {
analog_init();
while (ADC1_GC & ADC_GC_CAL) { /* wait */ }
while (ADC2_GC & ADC_GC_CAL) { /* wait */ }
}
void MarlinHAL::adc_start(const pin_t adc_pin) {
static const uint8_t pin2sc1a[] = {
0x07, // 0/A0 AD_B1_02
0x08, // 1/A1 AD_B1_03
@ -88,90 +154,30 @@ static const uint8_t pin2sc1a[] = {
0x0A, // 41/A17 AD_B1_05
#endif
};
/*
// disable interrupts
void cli() { noInterrupts(); }
// enable interrupts
void sei() { interrupts(); }
*/
void HAL_adc_init() {
analog_init();
while (ADC1_GC & ADC_GC_CAL) ;
while (ADC2_GC & ADC_GC_CAL) ;
}
void HAL_clear_reset_source() {
uint32_t reset_source = SRC_SRSR;
SRC_SRSR = reset_source;
}
uint8_t HAL_get_reset_source() {
switch (SRC_SRSR & 0xFF) {
case 1: return RST_POWER_ON; break;
case 2: return RST_SOFTWARE; break;
case 4: return RST_EXTERNAL; break;
//case 8: return RST_BROWN_OUT; break;
case 16: return RST_WATCHDOG; break;
case 64: return RST_JTAG; break;
//case 128: return RST_OVERTEMP; break;
}
return 0;
}
void HAL_reboot() { _reboot_Teensyduino_(); }
#define __bss_end _ebss
extern "C" {
extern char __bss_end;
extern char __heap_start;
extern void* __brkval;
// Doesn't work on Teensy 4.x
uint32_t freeMemory() {
uint32_t free_memory;
if ((uint32_t)__brkval == 0)
free_memory = ((uint32_t)&free_memory) - ((uint32_t)&__bss_end);
else
free_memory = ((uint32_t)&free_memory) - ((uint32_t)__brkval);
return free_memory;
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
const uint16_t pin = pin2sc1a[adc_pin];
if (pin == 0xFF) {
HAL_adc_select = -1; // Digital only
adc_select = -1; // Digital only
}
else if (pin & 0x80) {
HAL_adc_select = 1;
adc_select = 1;
ADC2_HC0 = pin & 0x7F;
}
else {
HAL_adc_select = 0;
adc_select = 0;
ADC1_HC0 = pin;
}
}
uint16_t HAL_adc_get_result() {
switch (HAL_adc_select) {
uint16_t MarlinHAL::adc_value() {
switch (adc_select) {
case 0:
while (!(ADC1_HS & ADC_HS_COCO0)) ; // wait
while (!(ADC1_HS & ADC_HS_COCO0)) { /* wait */ }
return ADC1_R0;
case 1:
while (!(ADC2_HS & ADC_HS_COCO0)) ; // wait
while (!(ADC2_HS & ADC_HS_COCO0)) { /* wait */ }
return ADC2_R0;
}
return 0;
}
bool is_output(pin_t pin) {
const struct digital_pin_bitband_and_config_table_struct *p;
p = digital_pin_to_info_PGM + pin;
return (*(p->reg + 1) & p->mask);
}
#endif // __IMXRT1062__

147
Marlin/src/HAL/TEENSY40_41/HAL.h
View File

@ -41,10 +41,6 @@
#include "../../feature/ethernet.h"
#endif
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Defines
// ------------------------
@ -55,7 +51,23 @@
#define IS_TEENSY41 1
#endif
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
#undef sq
#define sq(x) ((x)*(x))
// Don't place string constants in PROGMEM
#undef PSTR
#define PSTR(str) ({static const char *data = (str); &data[0];})
// ------------------------
// Serial ports
// ------------------------
#include "../../core/serial_hook.h"
#define Serial0 Serial
#define _DECLARE_SERIAL(X) \
typedef ForwardSerial1Class<decltype(Serial##X)> DefaultSerial##X; \
@ -89,41 +101,47 @@ extern USBSerialType USBSerial;
#endif
#endif
#define HAL_SERVO_LIB libServo
// ------------------------
// Types
// ------------------------
class libServo;
typedef libServo hal_servo_t;
typedef int8_t pin_t;
// ------------------------
// Interrupts
// ------------------------
#define CRITICAL_SECTION_START() const bool irqon = !__get_primask(); __disable_irq()
#define CRITICAL_SECTION_END() if (irqon) __enable_irq()
// ------------------------
// ADC
// ------------------------
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_primask())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_ADC_FILTERED // turn off ADC oversampling
#undef sq
#define sq(x) ((x)*(x))
//
// Pin Mapping for M42, M43, M226
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Don't place string constants in PROGMEM
#undef PSTR
#define PSTR(str) ({static const char *data = (str); &data[0];})
// FastIO
bool is_output(pin_t pin);
// Enable hooks into idle and setup for HAL
#define HAL_IDLETASK 1
FORCE_INLINE void HAL_idletask() {}
FORCE_INLINE void HAL_init() {}
// Clear reset reason
void HAL_clear_reset_source();
// Reset reason
uint8_t HAL_get_reset_source();
void HAL_reboot();
FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
// ------------------------
// Class Utilities
// ------------------------
#pragma GCC diagnostic push
#if GCC_VERSION <= 50000
@ -134,30 +152,65 @@ extern "C" uint32_t freeMemory();
#pragma GCC diagnostic pop
// ADC
// ------------------------
// MarlinHAL Class
// ------------------------
void HAL_adc_init();
class MarlinHAL {
public:
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_ADC_FILTERED // turn off ADC oversampling
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
// Earliest possible init, before setup()
MarlinHAL() {}
#define HAL_ANALOG_SELECT(pin)
static void init() {} // Called early in setup()
static void init_board() {} // Called less early in setup()
static void reboot(); // Restart the firmware from 0x0
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
// Interrupts
static bool isr_state() { return !__get_primask(); }
static void isr_on() { __enable_irq(); }
static void isr_off() { __disable_irq(); }
// PWM
static void delay_ms(const int ms) { delay(ms); }
inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); }
// Tasks, called from idle()
static void idletask() {}
// Pin Map
// Reset
static uint8_t get_reset_source();
static void clear_reset_source();
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Free SRAM
static int freeMemory() { return ::freeMemory(); }
bool is_output(pin_t pin);
//
// ADC Methods
//
static int8_t adc_select;
// Called by Temperature::init once at startup
static void adc_init();
// Called by Temperature::init for each sensor at startup
static void adc_enable(const pin_t pin) {}
// Begin ADC sampling on the given channel
static void adc_start(const pin_t pin);
// Is the ADC ready for reading?
static bool adc_ready() { return true; }
// The current value of the ADC register
static uint16_t adc_value();
/**
* Set the PWM duty cycle for the pin to the given value.
* No option to invert the duty cycle [default = false]
* No option to change the scale of the provided value to enable finer PWM duty control [default = 255]
*/
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
analogWrite(pin, v);
}
};

2
Marlin/src/HAL/TEENSY40_41/timers.h
View File

@ -114,4 +114,4 @@ bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
void HAL_timer_isr_prologue(const uint8_t timer_num);
//void HAL_timer_isr_epilogue(const uint8_t timer_num) {}
#define HAL_timer_isr_epilogue(T)
#define HAL_timer_isr_epilogue(T) NOOP

36
Marlin/src/HAL/shared/HAL.cpp Normal file
View File

@ -0,0 +1,36 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* HAL/shared/HAL.cpp
*/
#include "../../inc/MarlinConfig.h"
MarlinHAL hal;
#if ENABLED(SOFT_RESET_VIA_SERIAL)
// Global for use by e_parser.h
void HAL_reboot() { hal.reboot(); }
#endif

8
Marlin/src/HAL/shared/HAL_spi_L6470.cpp
View File

@ -92,9 +92,9 @@ uint8_t L64XX_Marlin::transfer_single(uint8_t data, int16_t ss_pin) {
// First device in chain has data sent last
extDigitalWrite(ss_pin, LOW);
DISABLE_ISRS(); // Disable interrupts during SPI transfer (can't allow partial command to chips)
hal.isr_off(); // Disable interrupts during SPI transfer (can't allow partial command to chips)
const uint8_t data_out = L6470_SpiTransfer_Mode_3(data);
ENABLE_ISRS(); // Enable interrupts
hal.isr_on(); // Enable interrupts
extDigitalWrite(ss_pin, HIGH);
return data_out;
@ -107,9 +107,9 @@ uint8_t L64XX_Marlin::transfer_chain(uint8_t data, int16_t ss_pin, uint8_t chain
extDigitalWrite(ss_pin, LOW);
for (uint8_t i = L64XX::chain[0]; !L64xxManager.spi_abort && i >= 1; i--) { // Send data unless aborted
DISABLE_ISRS(); // Disable interrupts during SPI transfer (can't allow partial command to chips)
hal.isr_off(); // Disable interrupts during SPI transfer (can't allow partial command to chips)
const uint8_t temp = L6470_SpiTransfer_Mode_3(uint8_t(i == chain_position ? data : dSPIN_NOP));
ENABLE_ISRS(); // Enable interrupts
hal.isr_on(); // Enable interrupts
if (i == chain_position) data_out = temp;
}

2
Marlin/src/HAL/shared/math_32bit.h
View File

@ -26,6 +26,6 @@
/**
* Math helper functions for 32 bit CPUs
*/
static FORCE_INLINE uint32_t MultiU32X24toH32(uint32_t longIn1, uint32_t longIn2) {
FORCE_INLINE static uint32_t MultiU32X24toH32(uint32_t longIn1, uint32_t longIn2) {
return ((uint64_t)longIn1 * longIn2 + 0x00800000) >> 24;
}

30
Marlin/src/MarlinCore.cpp
View File

@ -790,7 +790,7 @@ void idle(bool no_stepper_sleep/*=false*/) {
#endif
// Run HAL idle tasks
TERN_(HAL_IDLETASK, HAL_idletask());
hal.idletask();
// Check network connection
TERN_(HAS_ETHERNET, ethernet.check());
@ -929,7 +929,7 @@ void minkill(const bool steppers_off/*=false*/) {
watchdog_refresh();
// Reboot the board
HAL_reboot();
hal.reboot();
#else
@ -1041,7 +1041,7 @@ inline void tmc_standby_setup() {
* • L64XX Stepper Drivers (SPI)
* • Stepper Driver Reset: DISABLE
* • TMC Stepper Drivers (SPI)
* • Run BOARD_INIT if defined
* • Run hal.init_board() for additional pins setup
* • ESP WiFi
* - Get the Reset Reason and report it
* - Print startup messages and diagnostics
@ -1119,8 +1119,8 @@ void setup() {
tmc_standby_setup(); // TMC Low Power Standby pins must be set early or they're not usable
// Check startup - does nothing if bootloader sets MCUSR to 0
const byte mcu = HAL_get_reset_source();
HAL_clear_reset_source();
const byte mcu = hal.get_reset_source();
hal.clear_reset_source();
#if ENABLED(MARLIN_DEV_MODE)
auto log_current_ms = [&](PGM_P const msg) {
@ -1181,23 +1181,20 @@ void setup() {
JTAGSWD_RESET();
#endif
#if EITHER(DISABLE_DEBUG, DISABLE_JTAG)
delay(10);
// Disable any hardware debug to free up pins for IO
#if ENABLED(DISABLE_DEBUG) && defined(JTAGSWD_DISABLE)
delay(10);
SETUP_LOG("JTAGSWD_DISABLE");
JTAGSWD_DISABLE();
#elif defined(JTAG_DISABLE)
#elif ENABLED(DISABLE_JTAG) && defined(JTAG_DISABLE)
delay(10);
SETUP_LOG("JTAG_DISABLE");
JTAG_DISABLE();
#else
#error "DISABLE_(DEBUG|JTAG) is not supported for the selected MCU/Board."
#endif
#endif
TERN_(DYNAMIC_VECTORTABLE, hook_cpu_exceptions()); // If supported, install Marlin exception handlers at runtime
SETUP_RUN(HAL_init());
SETUP_RUN(hal.init());
// Init and disable SPI thermocouples; this is still needed
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0))
@ -1243,10 +1240,7 @@ void setup() {
SETUP_RUN(tmc_init_cs_pins());
#endif
#ifdef BOARD_INIT
SETUP_LOG("BOARD_INIT");
BOARD_INIT();
#endif
SETUP_RUN(hal.init_board());
SETUP_RUN(esp_wifi_init());
@ -1266,7 +1260,7 @@ void setup() {
);
#endif
SERIAL_ECHO_MSG(" Compiled: " __DATE__);
SERIAL_ECHO_MSG(STR_FREE_MEMORY, freeMemory(), STR_PLANNER_BUFFER_BYTES, sizeof(block_t) * (BLOCK_BUFFER_SIZE));
SERIAL_ECHO_MSG(STR_FREE_MEMORY, hal.freeMemory(), STR_PLANNER_BUFFER_BYTES, sizeof(block_t) * (BLOCK_BUFFER_SIZE));
// Some HAL need precise delay adjustment
calibrate_delay_loop();
@ -1542,7 +1536,7 @@ void setup() {
#endif
#if ENABLED(USE_WATCHDOG)
SETUP_RUN(watchdog_init()); // Reinit watchdog after HAL_get_reset_source call
SETUP_RUN(watchdog_init()); // Reinit watchdog after hal.get_reset_source call
#endif
#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)

2
Marlin/src/feature/caselight.cpp
View File

@ -79,7 +79,7 @@ void CaseLight::update(const bool sflag) {
#if CASELIGHT_USES_BRIGHTNESS
if (pin_is_pwm())
set_pwm_duty(pin_t(CASE_LIGHT_PIN), (
hal.set_pwm_duty(pin_t(CASE_LIGHT_PIN), (
#if CASE_LIGHT_MAX_PWM == 255
n10ct
#else

2
Marlin/src/feature/controllerfan.cpp
View File

@ -76,7 +76,7 @@ void ControllerFan::update() {
thermalManager.soft_pwm_controller_speed = speed;
#else
if (PWM_PIN(CONTROLLER_FAN_PIN))
set_pwm_duty(pin_t(CONTROLLER_FAN_PIN), speed);
hal.set_pwm_duty(pin_t(CONTROLLER_FAN_PIN), speed);
else
WRITE(CONTROLLER_FAN_PIN, speed > 0);
#endif

2
Marlin/src/feature/e_parser.h
View File

@ -41,7 +41,9 @@ extern bool wait_for_user, wait_for_heatup;
void quickresume_stepper();
#endif
#if ENABLED(SOFT_RESET_VIA_SERIAL)
void HAL_reboot();
#endif
class EmergencyParser {

2
Marlin/src/feature/leds/leds.cpp
View File

@ -131,7 +131,7 @@ void LEDLights::set_color(const LEDColor &incol
// If the pins can do PWM then their intensity will be set.
#define _UPDATE_RGBW(C,c) do { \
if (PWM_PIN(RGB_LED_##C##_PIN)) \
set_pwm_duty(pin_t(RGB_LED_##C##_PIN), c); \
hal.set_pwm_duty(pin_t(RGB_LED_##C##_PIN), c); \
else \
WRITE(RGB_LED_##C##_PIN, c ? HIGH : LOW); \
}while(0)

8
Marlin/src/feature/spindle_laser.cpp
View File

@ -66,10 +66,10 @@ void SpindleLaser::init() {
#endif
#if ENABLED(SPINDLE_LASER_USE_PWM)
SET_PWM(SPINDLE_LASER_PWM_PIN);
set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF); // Set to lowest speed
hal.set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF); // Set to lowest speed
#endif
#if ENABLED(HAL_CAN_SET_PWM_FREQ) && SPINDLE_LASER_FREQUENCY
set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_FREQUENCY);
hal.set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_FREQUENCY);
TERN_(MARLIN_DEV_MODE, frequency = SPINDLE_LASER_FREQUENCY);
#endif
#if ENABLED(AIR_EVACUATION)
@ -89,9 +89,9 @@ void SpindleLaser::init() {
*/
void SpindleLaser::_set_ocr(const uint8_t ocr) {
#if ENABLED(HAL_CAN_SET_PWM_FREQ) && SPINDLE_LASER_FREQUENCY
set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), TERN(MARLIN_DEV_MODE, frequency, SPINDLE_LASER_FREQUENCY));
hal.set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), TERN(MARLIN_DEV_MODE, frequency, SPINDLE_LASER_FREQUENCY));
#endif
set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), ocr ^ SPINDLE_LASER_PWM_OFF);
hal.set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), ocr ^ SPINDLE_LASER_PWM_OFF);
}
void SpindleLaser::set_ocr(const uint8_t ocr) {

2
Marlin/src/feature/spindle_laser.h
View File

@ -103,7 +103,7 @@ public:
static void init();
#if ENABLED(MARLIN_DEV_MODE)
static void refresh_frequency() { set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), frequency); }
static void refresh_frequency() { hal.set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), frequency); }
#endif
// Modifying this function should update everywhere

4
Marlin/src/gcode/control/M42.cpp
View File

@ -126,10 +126,10 @@ void GcodeSuite::M42() {
extDigitalWrite(pin, pin_status);
#ifdef ARDUINO_ARCH_STM32
// A simple I/O will be set to 0 by set_pwm_duty()
// A simple I/O will be set to 0 by hal.set_pwm_duty()
if (pin_status <= 1 && !PWM_PIN(pin)) return;
#endif
set_pwm_duty(pin, pin_status);
hal.set_pwm_duty(pin, pin_status);
}
#endif // DIRECT_PIN_CONTROL

10
Marlin/src/gcode/gcode_d.cpp
View File

@ -38,7 +38,7 @@
#include "../sd/cardreader.h"
#include "../MarlinCore.h" // for kill
extern void dump_delay_accuracy_check();
void dump_delay_accuracy_check();
/**
* Dn: G-code for development and testing
@ -54,7 +54,7 @@ void GcodeSuite::D(const int16_t dcode) {
for (;;) { /* loop forever (watchdog reset) */ }
case 0:
HAL_reboot();
hal.reboot();
break;
case 10:
@ -74,7 +74,7 @@ void GcodeSuite::D(const int16_t dcode) {
settings.reset();
settings.save();
#endif
HAL_reboot();
hal.reboot();
} break;
case 2: { // D2 Read / Write SRAM
@ -189,12 +189,12 @@ void GcodeSuite::D(const int16_t dcode) {
SERIAL_ECHOLNPGM("(USE_WATCHDOG " TERN(USE_WATCHDOG, "ENABLED", "DISABLED") ")");
thermalManager.disable_all_heaters();
delay(1000); // Allow time to print
DISABLE_ISRS();
hal.isr_off();
// Use a low-level delay that does not rely on interrupts to function
// Do not spin forever, to avoid thermal risks if heaters are enabled and
// watchdog does not work.
for (int i = 10000; i--;) DELAY_US(1000UL);
ENABLE_ISRS();
hal.isr_on();
SERIAL_ECHOLNPGM("FAILURE: Watchdog did not trigger board reset.");
} break;

1
Marlin/src/inc/MarlinConfig.h
View File

@ -29,6 +29,7 @@
#ifndef __MARLIN_DEPS__
#include "../HAL/HAL.h"
extern MarlinHAL hal;
#endif
#include "../pins/pins.h"

7
Marlin/src/inc/SanityCheck.h
View File

@ -3891,3 +3891,10 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
#undef _TEST_PWM
#undef _LINEAR_AXES_STR
#undef _LOGICAL_AXES_STR
// JTAG support in the HAL
#if ENABLED(DISABLE_DEBUG) && !defined(JTAGSWD_DISABLE)
#error "DISABLE_DEBUG is not supported for the selected MCU/Board."
#elif ENABLED(DISABLE_JTAG) && !defined(JTAG_DISABLE)
#error "DISABLE_JTAG is not supported for the selected MCU/Board."
#endif

4
Marlin/src/lcd/dogm/marlinui_DOGM.cpp
View File

@ -282,9 +282,9 @@ void MarlinUI::init_lcd() {
#if PIN_EXISTS(LCD_RESET)
// Perform a clean hardware reset with needed delays
OUT_WRITE(LCD_RESET_PIN, LOW);
_delay_ms(5);
hal.delay_ms(5);
WRITE(LCD_RESET_PIN, HIGH);
_delay_ms(5);
hal.delay_ms(5);
u8g.begin();
#endif

2
Marlin/src/lcd/e3v2/proui/dwin.cpp
View File

@ -2206,7 +2206,7 @@ void RebootPrinter() {
thermalManager.disable_all_heaters();
planner.finish_and_disable();
DWIN_RebootScreen();
HAL_reboot();
hal.reboot();
}
void Goto_Info_Menu(){

2
Marlin/src/module/endstops.cpp
View File

@ -1348,7 +1348,7 @@ void Endstops::update() {
ES_REPORT_CHANGE(K_MAX);
#endif
SERIAL_ECHOLNPGM("\n");
set_pwm_duty(pin_t(LED_PIN), local_LED_status);
hal.set_pwm_duty(pin_t(LED_PIN), local_LED_status);
local_LED_status ^= 255;
old_live_state_local = live_state_local;
}

8
Marlin/src/module/planner.cpp
View File

@ -703,7 +703,7 @@ void Planner::init() {
// All other 32-bit MPUs can easily do inverse using hardware division,
// so we don't need to reduce precision or to use assembly language at all.
// This routine, for all other archs, returns 0x100000000 / d ~= 0xFFFFFFFF / d
static FORCE_INLINE uint32_t get_period_inverse(const uint32_t d) {
FORCE_INLINE static uint32_t get_period_inverse(const uint32_t d) {
return d ? 0xFFFFFFFF / d : 0xFFFFFFFF;
}
#endif
@ -1260,7 +1260,7 @@ void Planner::recalculate() {
#if ENABLED(FAN_SOFT_PWM)
#define _FAN_SET(F) thermalManager.soft_pwm_amount_fan[F] = CALC_FAN_SPEED(F);
#else
#define _FAN_SET(F) set_pwm_duty(pin_t(FAN##F##_PIN), CALC_FAN_SPEED(F));
#define _FAN_SET(F) hal.set_pwm_duty(pin_t(FAN##F##_PIN), CALC_FAN_SPEED(F));
#endif
#define FAN_SET(F) do{ kickstart_fan(fan_speed, ms, F); _FAN_SET(F); }while(0)
@ -1397,8 +1397,8 @@ void Planner::check_axes_activity() {
TERN_(AUTOTEMP, autotemp_task());
#if ENABLED(BARICUDA)
TERN_(HAS_HEATER_1, set_pwm_duty(pin_t(HEATER_1_PIN), tail_valve_pressure));
TERN_(HAS_HEATER_2, set_pwm_duty(pin_t(HEATER_2_PIN), tail_e_to_p_pressure));
TERN_(HAS_HEATER_1, hal.set_pwm_duty(pin_t(HEATER_1_PIN), tail_valve_pressure));
TERN_(HAS_HEATER_2, hal.set_pwm_duty(pin_t(HEATER_2_PIN), tail_e_to_p_pressure));
#endif
}

2
Marlin/src/module/servo.cpp
View File

@ -30,7 +30,7 @@
#include "servo.h"
HAL_SERVO_LIB servo[NUM_SERVOS];
hal_servo_t servo[NUM_SERVOS];
#if ENABLED(EDITABLE_SERVO_ANGLES)
uint16_t servo_angles[NUM_SERVOS][2];

2
Marlin/src/module/servo.h
View File

@ -112,5 +112,5 @@
#define MOVE_SERVO(I, P) servo[I].move(P)
#define DETACH_SERVO(I) servo[I].detach()
extern HAL_SERVO_LIB servo[NUM_SERVOS];
extern hal_servo_t servo[NUM_SERVOS];
void servo_init();

26
Marlin/src/module/stepper.cpp
View File

@ -1474,7 +1474,7 @@ void Stepper::isr() {
#ifndef __AVR__
// Disable interrupts, to avoid ISR preemption while we reprogram the period
// (AVR enters the ISR with global interrupts disabled, so no need to do it here)
DISABLE_ISRS();
hal.isr_off();
#endif
// Program timer compare for the maximum period, so it does NOT
@ -1492,7 +1492,7 @@ void Stepper::isr() {
hal_timer_t min_ticks;
do {
// Enable ISRs to reduce USART processing latency
ENABLE_ISRS();
hal.isr_on();
if (!nextMainISR) pulse_phase_isr(); // 0 = Do coordinated axes Stepper pulses
@ -1576,7 +1576,7 @@ void Stepper::isr() {
* is less than the current count due to something preempting between the
* read and the write of the new period value).
*/
DISABLE_ISRS();
hal.isr_off();
/**
* Get the current tick value + margin
@ -1611,7 +1611,7 @@ void Stepper::isr() {
HAL_timer_set_compare(MF_TIMER_STEP, hal_timer_t(next_isr_ticks));
// Don't forget to finally reenable interrupts
ENABLE_ISRS();
hal.isr_on();
}
#if MINIMUM_STEPPER_PULSE || MAXIMUM_STEPPER_RATE
@ -3260,33 +3260,33 @@ void Stepper::report_positions() {
#elif HAS_MOTOR_CURRENT_PWM
#define _WRITE_CURRENT_PWM_DUTY(P) set_pwm_duty(pin_t(MOTOR_CURRENT_PWM_## P ##_PIN), 255L * current / (MOTOR_CURRENT_PWM_RANGE))
#define _WRITE_CURRENT_PWM(P) hal.set_pwm_duty(pin_t(MOTOR_CURRENT_PWM_## P ##_PIN), 255L * current / (MOTOR_CURRENT_PWM_RANGE))
switch (driver) {
case 0:
#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
_WRITE_CURRENT_PWM_DUTY(X);
_WRITE_CURRENT_PWM(X);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
_WRITE_CURRENT_PWM_DUTY(Y);
_WRITE_CURRENT_PWM(Y);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
_WRITE_CURRENT_PWM_DUTY(XY);
_WRITE_CURRENT_PWM(XY);
#endif
break;
case 1:
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
_WRITE_CURRENT_PWM_DUTY(Z);
_WRITE_CURRENT_PWM(Z);
#endif
break;
case 2:
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
_WRITE_CURRENT_PWM_DUTY(E);
_WRITE_CURRENT_PWM(E);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E0)
_WRITE_CURRENT_PWM_DUTY(E0);
_WRITE_CURRENT_PWM(E0);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E1)
_WRITE_CURRENT_PWM_DUTY(E1);
_WRITE_CURRENT_PWM(E1);
#endif
break;
}
@ -3308,7 +3308,7 @@ void Stepper::report_positions() {
#ifdef __SAM3X8E__
#define _RESET_CURRENT_PWM_FREQ(P) NOOP
#else
#define _RESET_CURRENT_PWM_FREQ(P) set_pwm_frequency(pin_t(P), MOTOR_CURRENT_PWM_FREQUENCY)
#define _RESET_CURRENT_PWM_FREQ(P) hal.set_pwm_frequency(pin_t(P), MOTOR_CURRENT_PWM_FREQUENCY)
#endif
#define INIT_CURRENT_PWM(P) do{ SET_PWM(MOTOR_CURRENT_PWM_## P ##_PIN); _RESET_CURRENT_PWM_FREQ(MOTOR_CURRENT_PWM_## P ##_PIN); }while(0)

155
Marlin/src/module/temperature.cpp
View File

@ -327,7 +327,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED);
#define _INIT_FAN_PIN(P) do{ if (PWM_PIN(P)) SET_PWM(P); else _INIT_SOFT_FAN(P); }while(0)
#endif
#if ENABLED(FAST_PWM_FAN)
#define SET_FAST_PWM_FREQ(P) set_pwm_frequency(P, FAST_PWM_FAN_FREQUENCY)
#define SET_FAST_PWM_FREQ(P) hal.set_pwm_frequency(pin_t(P), FAST_PWM_FAN_FREQUENCY)
#else
#define SET_FAST_PWM_FREQ(P) NOOP
#endif
@ -818,7 +818,7 @@ volatile bool Temperature::raw_temps_ready = false;
}
// Run HAL idle tasks
TERN_(HAL_IDLETASK, HAL_idletask());
hal.idletask();
// Run UI update
TERN(HAS_DWIN_E3V2_BASIC, DWIN_Update(), ui.update());
@ -907,7 +907,7 @@ int16_t Temperature::getHeaterPower(const heater_id_t heater_id) {
#define _UPDATE_AUTO_FAN(P,D,A) do{ \
if (PWM_PIN(P##_AUTO_FAN_PIN) && A < 255) \
set_pwm_duty(pin_t(P##_AUTO_FAN_PIN), D ? A : 0); \
hal.set_pwm_duty(pin_t(P##_AUTO_FAN_PIN), D ? A : 0); \
else \
WRITE(P##_AUTO_FAN_PIN, D); \
}while(0)
@ -2321,74 +2321,33 @@ void Temperature::init() {
TERN_(HAS_MAXTC_SW_SPI, max_tc_spi.init());
HAL_adc_init();
hal.adc_init();
TERN_(HAS_TEMP_ADC_0, hal.adc_enable(TEMP_0_PIN));
TERN_(HAS_TEMP_ADC_1, hal.adc_enable(TEMP_1_PIN));
TERN_(HAS_TEMP_ADC_2, hal.adc_enable(TEMP_2_PIN));
TERN_(HAS_TEMP_ADC_3, hal.adc_enable(TEMP_3_PIN));
TERN_(HAS_TEMP_ADC_4, hal.adc_enable(TEMP_4_PIN));
TERN_(HAS_TEMP_ADC_5, hal.adc_enable(TEMP_5_PIN));
TERN_(HAS_TEMP_ADC_6, hal.adc_enable(TEMP_6_PIN));
TERN_(HAS_TEMP_ADC_7, hal.adc_enable(TEMP_7_PIN));
TERN_(HAS_JOY_ADC_X, hal.adc_enable(JOY_X_PIN));
TERN_(HAS_JOY_ADC_Y, hal.adc_enable(JOY_Y_PIN));
TERN_(HAS_JOY_ADC_Z, hal.adc_enable(JOY_Z_PIN));
TERN_(HAS_TEMP_ADC_BED, hal.adc_enable(TEMP_BED_PIN));
TERN_(HAS_TEMP_ADC_CHAMBER, hal.adc_enable(TEMP_CHAMBER_PIN));
TERN_(HAS_TEMP_ADC_PROBE, hal.adc_enable(TEMP_PROBE_PIN));
TERN_(HAS_TEMP_ADC_COOLER, hal.adc_enable(TEMP_COOLER_PIN));
TERN_(HAS_TEMP_ADC_BOARD, hal.adc_enable(TEMP_BOARD_PIN));
TERN_(HAS_TEMP_ADC_REDUNDANT, hal.adc_enable(TEMP_REDUNDANT_PIN));
TERN_(FILAMENT_WIDTH_SENSOR, hal.adc_enable(FILWIDTH_PIN));
TERN_(HAS_ADC_BUTTONS, hal.adc_enable(ADC_KEYPAD_PIN));
TERN_(POWER_MONITOR_CURRENT, hal.adc_enable(POWER_MONITOR_CURRENT_PIN));
TERN_(POWER_MONITOR_VOLTAGE, hal.adc_enable(POWER_MONITOR_VOLTAGE_PIN));
#if HAS_TEMP_ADC_0
HAL_ANALOG_SELECT(TEMP_0_PIN);
#endif
#if HAS_TEMP_ADC_1
HAL_ANALOG_SELECT(TEMP_1_PIN);
#endif
#if HAS_TEMP_ADC_2
HAL_ANALOG_SELECT(TEMP_2_PIN);
#endif
#if HAS_TEMP_ADC_3
HAL_ANALOG_SELECT(TEMP_3_PIN);
#endif
#if HAS_TEMP_ADC_4
HAL_ANALOG_SELECT(TEMP_4_PIN);
#endif
#if HAS_TEMP_ADC_5
HAL_ANALOG_SELECT(TEMP_5_PIN);
#endif
#if HAS_TEMP_ADC_6
HAL_ANALOG_SELECT(TEMP_6_PIN);
#endif
#if HAS_TEMP_ADC_7
HAL_ANALOG_SELECT(TEMP_7_PIN);
#endif
#if HAS_JOY_ADC_X
HAL_ANALOG_SELECT(JOY_X_PIN);
#endif
#if HAS_JOY_ADC_Y
HAL_ANALOG_SELECT(JOY_Y_PIN);
#endif
#if HAS_JOY_ADC_Z
HAL_ANALOG_SELECT(JOY_Z_PIN);
#endif
#if HAS_JOY_ADC_EN
SET_INPUT_PULLUP(JOY_EN_PIN);
#endif
#if HAS_TEMP_ADC_BED
HAL_ANALOG_SELECT(TEMP_BED_PIN);
#endif
#if HAS_TEMP_ADC_CHAMBER
HAL_ANALOG_SELECT(TEMP_CHAMBER_PIN);
#endif
#if HAS_TEMP_ADC_PROBE
HAL_ANALOG_SELECT(TEMP_PROBE_PIN);
#endif
#if HAS_TEMP_ADC_COOLER
HAL_ANALOG_SELECT(TEMP_COOLER_PIN);
#endif
#if HAS_TEMP_ADC_BOARD
HAL_ANALOG_SELECT(TEMP_BOARD_PIN);
#endif
#if HAS_TEMP_ADC_REDUNDANT
HAL_ANALOG_SELECT(TEMP_REDUNDANT_PIN);
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
HAL_ANALOG_SELECT(FILWIDTH_PIN);
#endif
#if HAS_ADC_BUTTONS
HAL_ANALOG_SELECT(ADC_KEYPAD_PIN);
#endif
#if ENABLED(POWER_MONITOR_CURRENT)
HAL_ANALOG_SELECT(POWER_MONITOR_CURRENT_PIN);
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
HAL_ANALOG_SELECT(POWER_MONITOR_VOLTAGE_PIN);
#endif
HAL_timer_start(MF_TIMER_TEMP, TEMP_TIMER_FREQUENCY);
ENABLE_TEMPERATURE_INTERRUPT();
@ -3364,8 +3323,8 @@ void Temperature::isr() {
* This gives each ADC 0.9765ms to charge up.
*/
#define ACCUMULATE_ADC(obj) do{ \
if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \
else obj.sample(HAL_READ_ADC()); \
if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; \
else obj.sample(hal.adc_value()); \
}while(0)
ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling;
@ -3397,115 +3356,115 @@ void Temperature::isr() {
break;
#if HAS_TEMP_ADC_0
case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break;
case PrepareTemp_0: hal.adc_start(TEMP_0_PIN); break;
case MeasureTemp_0: ACCUMULATE_ADC(temp_hotend[0]); break;
#endif
#if HAS_TEMP_ADC_BED
case PrepareTemp_BED: HAL_START_ADC(TEMP_BED_PIN); break;
case PrepareTemp_BED: hal.adc_start(TEMP_BED_PIN); break;
case MeasureTemp_BED: ACCUMULATE_ADC(temp_bed); break;
#endif
#if HAS_TEMP_ADC_CHAMBER
case PrepareTemp_CHAMBER: HAL_START_ADC(TEMP_CHAMBER_PIN); break;
case PrepareTemp_CHAMBER: hal.adc_start(TEMP_CHAMBER_PIN); break;
case MeasureTemp_CHAMBER: ACCUMULATE_ADC(temp_chamber); break;
#endif
#if HAS_TEMP_ADC_COOLER
case PrepareTemp_COOLER: HAL_START_ADC(TEMP_COOLER_PIN); break;
case PrepareTemp_COOLER: hal.adc_start(TEMP_COOLER_PIN); break;
case MeasureTemp_COOLER: ACCUMULATE_ADC(temp_cooler); break;
#endif
#if HAS_TEMP_ADC_PROBE
case PrepareTemp_PROBE: HAL_START_ADC(TEMP_PROBE_PIN); break;
case PrepareTemp_PROBE: hal.adc_start(TEMP_PROBE_PIN); break;
case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break;
#endif
#if HAS_TEMP_ADC_BOARD
case PrepareTemp_BOARD: HAL_START_ADC(TEMP_BOARD_PIN); break;
case PrepareTemp_BOARD: hal.adc_start(TEMP_BOARD_PIN); break;
case MeasureTemp_BOARD: ACCUMULATE_ADC(temp_board); break;
#endif
#if HAS_TEMP_ADC_REDUNDANT
case PrepareTemp_REDUNDANT: HAL_START_ADC(TEMP_REDUNDANT_PIN); break;
case PrepareTemp_REDUNDANT: hal.adc_start(TEMP_REDUNDANT_PIN); break;
case MeasureTemp_REDUNDANT: ACCUMULATE_ADC(temp_redundant); break;
#endif
#if HAS_TEMP_ADC_1
case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break;
case PrepareTemp_1: hal.adc_start(TEMP_1_PIN); break;
case MeasureTemp_1: ACCUMULATE_ADC(temp_hotend[1]); break;
#endif
#if HAS_TEMP_ADC_2
case PrepareTemp_2: HAL_START_ADC(TEMP_2_PIN); break;
case PrepareTemp_2: hal.adc_start(TEMP_2_PIN); break;
case MeasureTemp_2: ACCUMULATE_ADC(temp_hotend[2]); break;
#endif
#if HAS_TEMP_ADC_3
case PrepareTemp_3: HAL_START_ADC(TEMP_3_PIN); break;
case PrepareTemp_3: hal.adc_start(TEMP_3_PIN); break;
case MeasureTemp_3: ACCUMULATE_ADC(temp_hotend[3]); break;
#endif
#if HAS_TEMP_ADC_4
case PrepareTemp_4: HAL_START_ADC(TEMP_4_PIN); break;
case PrepareTemp_4: hal.adc_start(TEMP_4_PIN); break;
case MeasureTemp_4: ACCUMULATE_ADC(temp_hotend[4]); break;
#endif
#if HAS_TEMP_ADC_5
case PrepareTemp_5: HAL_START_ADC(TEMP_5_PIN); break;
case PrepareTemp_5: hal.adc_start(TEMP_5_PIN); break;
case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break;
#endif
#if HAS_TEMP_ADC_6
case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break;
case PrepareTemp_6: hal.adc_start(TEMP_6_PIN); break;
case MeasureTemp_6: ACCUMULATE_ADC(temp_hotend[6]); break;
#endif
#if HAS_TEMP_ADC_7
case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break;
case PrepareTemp_7: hal.adc_start(TEMP_7_PIN); break;
case MeasureTemp_7: ACCUMULATE_ADC(temp_hotend[7]); break;
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break;
case Prepare_FILWIDTH: hal.adc_start(FILWIDTH_PIN); break;
case Measure_FILWIDTH:
if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; // Redo this state
else filwidth.accumulate(HAL_READ_ADC());
if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; // Redo this state
else filwidth.accumulate(hal.adc_value());
break;
#endif
#if ENABLED(POWER_MONITOR_CURRENT)
case Prepare_POWER_MONITOR_CURRENT:
HAL_START_ADC(POWER_MONITOR_CURRENT_PIN);
hal.adc_start(POWER_MONITOR_CURRENT_PIN);
break;
case Measure_POWER_MONITOR_CURRENT:
if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; // Redo this state
else power_monitor.add_current_sample(HAL_READ_ADC());
if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; // Redo this state
else power_monitor.add_current_sample(hal.adc_value());
break;
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
case Prepare_POWER_MONITOR_VOLTAGE:
HAL_START_ADC(POWER_MONITOR_VOLTAGE_PIN);
hal.adc_start(POWER_MONITOR_VOLTAGE_PIN);
break;
case Measure_POWER_MONITOR_VOLTAGE:
if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; // Redo this state
else power_monitor.add_voltage_sample(HAL_READ_ADC());
if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; // Redo this state
else power_monitor.add_voltage_sample(hal.adc_value());
break;
#endif
#if HAS_JOY_ADC_X
case PrepareJoy_X: HAL_START_ADC(JOY_X_PIN); break;
case PrepareJoy_X: hal.adc_start(JOY_X_PIN); break;
case MeasureJoy_X: ACCUMULATE_ADC(joystick.x); break;
#endif
#if HAS_JOY_ADC_Y
case PrepareJoy_Y: HAL_START_ADC(JOY_Y_PIN); break;
case PrepareJoy_Y: hal.adc_start(JOY_Y_PIN); break;
case MeasureJoy_Y: ACCUMULATE_ADC(joystick.y); break;
#endif
#if HAS_JOY_ADC_Z
case PrepareJoy_Z: HAL_START_ADC(JOY_Z_PIN); break;
case PrepareJoy_Z: hal.adc_start(JOY_Z_PIN); break;
case MeasureJoy_Z: ACCUMULATE_ADC(joystick.z); break;
#endif
@ -3513,12 +3472,12 @@ void Temperature::isr() {
#ifndef ADC_BUTTON_DEBOUNCE_DELAY
#define ADC_BUTTON_DEBOUNCE_DELAY 16
#endif
case Prepare_ADC_KEY: HAL_START_ADC(ADC_KEYPAD_PIN); break;
case Prepare_ADC_KEY: hal.adc_start(ADC_KEYPAD_PIN); break;
case Measure_ADC_KEY:
if (!HAL_ADC_READY())
if (!hal.adc_ready())
next_sensor_state = adc_sensor_state; // redo this state
else if (ADCKey_count < ADC_BUTTON_DEBOUNCE_DELAY) {
raw_ADCKey_value = HAL_READ_ADC();
raw_ADCKey_value = hal.adc_value();
if (raw_ADCKey_value <= 900UL * HAL_ADC_RANGE / 1024UL) {
NOMORE(current_ADCKey_raw, raw_ADCKey_value);
ADCKey_count++;

2
ini/features.ini
View File

@ -233,7 +233,7 @@ HAS_SERVOS = src_filter=+<src/module/servo.cpp> +<sr
MORGAN_SCARA = src_filter=+<src/gcode/scara>
HAS_MICROSTEPS = src_filter=+<src/gcode/control/M350_M351.cpp>
(ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer
ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master.zip
ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master-2.0.7.zip
arduinoWebSockets=links2004/WebSockets@2.3.4
luc-github/ESP32SSDP@^1.1.1
lib_ignore=ESPAsyncTCP

4
ini/native.ini
View File

@ -34,14 +34,14 @@ src_filter = ${common.default_src_filter} +<src/HAL/LINUX>
[simulator_common]
platform = native
framework =
build_flags = ${common.build_flags} -std=gnu++17 -D__PLAT_NATIVE_SIM__ -DU8G_HAL_LINKS -I/usr/include/SDL2 -IMarlin -IMarlin/src/HAL/NATIVE_SIM/include -IMarlin/src/HAL/NATIVE_SIM/u8g
build_flags = ${common.build_flags} -std=gnu++17 -D__PLAT_NATIVE_SIM__ -DU8G_HAL_LINKS -I/usr/include/SDL2 -IMarlin -IMarlin/src/HAL/NATIVE_SIM/u8g
src_build_flags = -Wall -Wno-expansion-to-defined -Wcast-align
release_flags = -g0 -O3 -flto
debug_build_flags = -fstack-protector-strong -g -g3 -ggdb
lib_compat_mode = off
src_filter = ${common.default_src_filter} +<src/HAL/NATIVE_SIM>
lib_deps = ${common.lib_deps}
MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/master.zip
MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/0.0.2.zip
Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/marlin_sim_native.zip
LiquidCrystal=https://github.com/p3p/LiquidCrystal/archive/master.zip
extra_scripts = ${common.extra_scripts}

1
ini/stm32-common.ini
View File

@ -16,6 +16,7 @@ build_flags = ${common.build_flags}
-std=gnu++14 -DHAL_STM32
-DUSBCON -DUSBD_USE_CDC
-DTIM_IRQ_PRIO=13
-DADC_RESOLUTION=12
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>
extra_scripts = ${common.extra_scripts}

1
ini/stm32g0.ini
View File

@ -30,7 +30,6 @@ board = marlin_STM32G0B1RE
board_build.offset = 0x2000
board_upload.offset_address = 0x08002000
build_flags = ${stm32_variant.build_flags}
-DADC_RESOLUTION=12
-DPIN_SERIAL4_RX=PC_11 -DPIN_SERIAL4_TX=PC_10
-DSERIAL_RX_BUFFER_SIZE=1024 -DSERIAL_TX_BUFFER_SIZE=1024
-DTIMER_SERVO=TIM3 -DTIMER_TONE=TIM4