bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

📝 Consistent pin header orientation

Browse Source
This commit is contained in:
Scott Lahteine
2021-12-27 20:52:43 -06:00
committed by Scott Lahteine
parent 4cfe812c18
commit 56adbc3ebf
30 changed files with 329 additions and 327 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h
View File

@ -197,16 +197,16 @@
#endif
/**
* -----------------------------------BTT002 V1.0----------------------------------------
* ------ ------ |
* PA3 | 1 2 | GND 5V | 1 2 | GND |
* NRESET | 3 4 | PC4 (SD_DET) (LCD_D7) PE13 | 3 4 | PE12 (LCD_D6) |
* (MOSI) PA7 | 5 6 | PB0 (BTN_EN2) (LCD_D5) PE11 | 5 6 | PE10 (LCD_D4) |
* (SD_SS) PA4 | 7 8 | PC5 (BTN_EN1) (LCD_RS) PE8 | 7 8 | PE9 (LCD_EN) |
* (SCK) PA5 | 9 10 | PA6 (MISO) (BTN_ENC) PB1 | 9 10 | PE7 (BEEPER) |
* ------ ------ |
* EXP2 EXP1 |
* --------------------------------------------------------------------------------------
* ---------------------------------BTT002 V1.0---------------------------------
* ------ ------ |
* (BEEPER) PE7 |10 9 | PB1 (BTN_ENC) (MISO) PA6 |10 9 | PA5 (SCK) |
* (LCD_EN) PE9 | 8 7 | PE8 (LCD_RS) (BTN_EN1) PC5 | 8 7 | PA4 (SD_SS) |
* (LCD_D4) PE10 6 5 | PE11 (LCD_D5) (BTN_EN2) PB0 6 5 | PA7 (MOSI) |
* (LCD_D6) PE12 | 4 3 | PE13 (LCD_D7) (SD_DET) PC4 | 4 3 | RESET |
* GND | 2 1 | 5V GND | 2 1 | PA3 |
* ------ ------ |
* EXP1 EXP2 |
* ------------------------------------------------------------------------------
*/
#define EXP1_03_PIN PE13
#define EXP1_04_PIN PE12

52
Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
View File

@ -184,14 +184,14 @@
#endif
/**
* BTT E3 RRF
* -----
* 5V | 1 2 | GND
* (LCD_EN) PE11 | 3 4 | PB1 (LCD_RS)
* (LCD_D4) PE10 | 5 6 PB2 (BTN_EN2)
* RESET | 7 8 | PE7 (BTN_EN1)
* (BTN_ENC) PE9 | 9 10| PE8 (BEEPER)
* -----
* BTT E3 RRF
* ------
* (BEEPER) PE8 |10 9 | PE9 (BTN_ENC)
* (BTN_EN1) PE7 | 8 7 | RESET
* (BTN_EN2) PB2 6 5 | PE10 (LCD_D4)
* (LCD_RS) PB1 | 4 3 | PE11 (LCD_EN)
* GND | 2 1 | 5V
* ------
* EXP1
*/
@ -244,15 +244,15 @@
/**
* TFTGLCD_PANEL_SPI display pinout
*
* Board Display
* ----- -----
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PE11 | 3 4 | PB1 (LCD_CS) (PE7) LCD_CS | 3 4 | SD_CS (PB2)
* (FREE) PE10 | 5 6 | PB2 (SD_CS) (FREE) | 5 6 | MOSI (SPI1-MOSI)
* RESET | 7 8 | PE7 (MOD_RESET) (PE8) SD_DET | 7 8 | (FREE)
* (BEEPER) PE9 | 9 10| PE8 (SD_DET) GND | 9 10| 5V
* ----- -----
* EXP1 EXP1
* Board Display
* ------ ------
* (SD_DET) PE8 |10 9 | PE9 (BEEPER) 5V |10 9 | GND
* (MOD_RESET) PE7 | 8 7 | RESET -- | 8 7 | (SD_DET)
* (SD_CS) PB2 6 5 | PE10 (MOSI) 6 5 | --
* (LCD_CS) PB1 | 4 3 | PE11 (SD_CS) | 4 3 | (LCD_CS)
* GND | 2 1 | 5V (SCK) | 2 1 | (MISO)
* ------ ------
* EXP1 EXP1
*
* Needs custom cable:
*
@ -293,15 +293,15 @@
/** FYSETC TFT TFT81050 display pinout
*
* Board Display
* ----- -----
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PE11 | 3 4 | PB1 (LCD_CS) (PE7) MOD_RESET | 3 4 | SD_CS (PB2)
* (FREE) PE10 | 5 6 | PB2 (SD_CS) (PB1) LCD_CS | 5 6 | MOSI (SPI1-MOSI)
* RESET | 7 8 | PE7 (MOD_RESET) (PE8) SD_DET | 7 8 | RESET
* (BEEPER) PE9 | 9 10| PE8 (SD_DET) GND | 9 10| 5V
* ----- -----
* EXP1 EXP1
* Board Display
* ------ ------
* (SD_DET) PE8 |10 9 | PE9 (BEEPER) 5V |10 9 | GND
* (MOD_RESET) PE7 | 8 7 | RESET RESET | 8 7 | (SD_DET)
* (SD_CS) PB2 6 5 | PE10 (MOSI) | 6 5 | (LCD_CS)
* (LCD_CS) PB1 | 4 3 | PE11 (SD_CS) | 4 3 | (MOD_RESET)
* GND | 2 1 | 5V (SCK) | 2 1 | (MISO)
* ------ ------
* EXP1 EXP1
*
* Needs custom cable:
*

16
Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h
View File

@ -365,14 +365,14 @@
#endif
/**
* ------ ------
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | PB10 (SD_DETECT) (LCD_D7) PG5 | 3 4 | PG6 (LCD_D6)
* (MOSI) PB15 | 5 6 | PH10 (BTN_EN2) (LCD_D5) PG7 | 5 6 | PG8 (LCD_D4)
* (SD_SS) PB12 | 7 8 | PD10 (BTN_EN1) (LCD_RS) PA8 | 7 8 | PC10 (LCD_EN)
* (SCK) PB13 | 9 10 | PB14 (MISO) (BTN_ENC) PA15 | 9 10 | PC11 (BEEPER)
* ------ ------
* EXP2 EXP1
* ------ ------
* (BEEPER) PC11 |10 9 | PA15 (BTN_ENC) (MISO) PB14 |10 9 | PB13 (SCK)
* (LCD_EN) PC10 | 8 7 | PA8 (LCD_RS) (BTN_EN1) PD10 | 8 7 | PB12 (SD_SS)
* (LCD_D4) PG8 6 5 | PG7 (LCD_D5) (BTN_EN2) PH10 6 5 | PB15 (MOSI)
* (LCD_D6) PG6 | 4 3 | PG5 (LCD_D7) (SD_DETECT) PB10 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PG5
#define EXP1_04_PIN PG6

24
Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h
View File

@ -330,7 +330,7 @@
* (LCD_EN) PE9 | 8 7 | PE10 (LCD_RS) (BTN_EN1) PB2 | 8 7 | PA4 (SD_SS)
* (LCD_D4) PE12 6 5 | PE13 (LCD_D5) (BTN_EN2) PB1 6 5 | PA7 (MOSI)
* (LCD_D6) PE14 | 4 3 | PE15 (LCD_D7) (SD_DETECT) PC15 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
@ -379,14 +379,14 @@
#if ENABLED(BTT_MOTOR_EXPANSION)
/**
* ------ ------
* NC | 1 2 | GND NC | 1 2 | GND
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG
* M2DIR | 7 8 | M2STP M2RX | 7 8 | M2DIAG
* M3DIR | 9 10 | M3STP M3RX | 9 10 | M3DIAG
* ------ ------
* EXP2 EXP1
* ------ ------
* M3DIAG |10 9 | M3RX M3STP |10 9 | M3DIR
* M2DIAG | 8 7 | M2RX M2STP | 8 7 | M2DIR
* M1DIAG 6 5 | M1RX M1DIR 6 5 | M1STP
* M3EN | 4 3 | M2EN M1EN | 4 3 | --
* GND | 2 1 | -- GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
// M1 on Driver Expansion Module
@ -534,9 +534,9 @@
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PD10 | 13 | | 4 | NC
* NC | 14 | | 3 | PE15 (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | NC
* (ESP-IO4) PD10 | 13 | | 4 | --
* -- | 14 | | 3 | PE15 (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST)
* -------
* WIFI

32
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h
View File

@ -317,7 +317,7 @@
* (LCD_EN) PD11 | 8 7 | PD10 (LCD_RS) (BTN_EN1) PG10 | 8 7 | PB12 (SD_SS)
* (LCD_D4) PG2 6 5 | PG3 (LCD_D5) (BTN_EN2) PF11 6 5 | PB15 (MOSI)
* (LCD_D6) PG6 | 4 3 | PG7 (LCD_D7) (SD_DETECT) PF12 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
@ -367,8 +367,8 @@
#if ENABLED(BTT_MOTOR_EXPANSION)
/** ----- -----
* NC | . . | GND NC | . . | GND
* NC | . . | M1EN M2EN | . . | M3EN
* -- | . . | GND -- | . . | GND
* -- | . . | M1EN M2EN | . . | M3EN
* M1STP | . . M1DIR M1RX | . . M1DIAG
* M2DIR | . . | M2STP M2RX | . . | M2DIAG
* M3DIR | . . | M3STP M3RX | . . | M3DIAG
@ -466,13 +466,13 @@
*
* The WYH_L12864 connector plug:
*
* BEFORE AFTER
* ______ ______
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* SCK | 7 8 | BTN_ENC SCK | 7 8 | BTN_ENC
* MOSI | 9 10 | MOSI | 9 10 |
* BEFORE AFTER
* ------ ------
* -- |10 9 | MOSI -- |10 9 | MOSI
* BTN_ENC | 8 7 | SCK BTN_ENC | 8 7 | SCK
* BTN_EN1 | 6 5 SID BTN_EN1 | 6 5 SID
* BTN_EN2 | 4 3 | CS BTN_EN2 | 4 3 | CS
* 5V | 2 1 | GND GND | 2 1 | 5V
* ------ ------
* LCD LCD
*/
@ -550,12 +550,12 @@
//
/**
* -----
* TX | 1 2 | GND Enable PG1 // Must be high for module to run
* Enable | 3 4 | GPIO2 Reset PG0 // active low, probably OK to leave floating
* Reset | 5 6 | GPIO0 GPIO2 PF15 // must be high (ESP3D software configures this with a pullup so OK to leave as floating)
* 3.3V | 7 8 | RX GPIO0 PF14 // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* -----
* ------
* RX | 8 7 | 3.3V GPIO0 PF14 ... Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* GPIO0 | 6 5 | Reset GPIO2 PF15 ... must be high (ESP3D software configures this with a pullup so OK to leave as floating)
* GPIO2 | 4 3 | Enable Reset PG0 ... active low, probably OK to leave floating
* GND | 2 1 | TX Enable PG1 ... Must be high for module to run
* ------
* W1
*/
#define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this

26
Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h
View File

@ -333,14 +333,14 @@
#endif
/**
* ------ ------
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | PC4 (SD_DETECT) (LCD_D7) PE13 | 3 4 | PE12 (LCD_D6)
* (MOSI) PA7 | 5 6 PB2 (BTN_EN2) (LCD_D5) PE11 | 5 6 PE10 (LCD_D4)
* (SD_SS) PA4 | 7 8 | PE7 (BTN_EN1) (LCD_RS) PE9 | 7 8 | PB1 (LCD_EN)
* (SCK) PA5 | 9 10 | PA6 (MISO) (BTN_ENC) PB0 | 9 10 | PC5 (BEEPER)
* ------ ------
* EXP2 EXP1
* ------ ------
* (BEEPER) PC5 |10 9 | PB0 (BTN_ENC) (MISO) PA6 |10 9 | PA5 (SCK)
* (LCD_EN) PB1 | 8 7 | PE9 (LCD_RS) (BTN_EN1) PE7 | 8 7 | PA4 (SD_SS)
* (LCD_D4) PE10 | 6 5 PE11 (LCD_D5) (BTN_EN2) PB2 | 6 5 PA7 (MOSI)
* (LCD_D6) PE12 | 4 3 | PE13 (LCD_D7) (SD_DETECT) PC4 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PE13
#define EXP1_04_PIN PE12
@ -379,8 +379,8 @@
#if ENABLED(BTT_MOTOR_EXPANSION)
/** ----- -----
* NC | . . | GND NC | . . | GND
* NC | . . | M1EN M2EN | . . | M3EN
* -- | . . | GND -- | . . | GND
* -- | . . | M1EN M2EN | . . | M3EN
* M1STP | . . M1DIR M1RX | . . M1DIAG
* M2DIR | . . | M2STP M2RX | . . | M2DIAG
* M3DIR | . . | M3STP M3RX | . . | M3DIAG
@ -562,9 +562,9 @@
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PB10 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PB11 | 13 | | 4 | NC
* NC | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | NC
* (ESP-IO4) PB11 | 13 | | 4 | --
* -- | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PC14 (ESP-RST)
* -------
* WIFI

2
Marlin/src/pins/stm32f4/pins_FLYF407ZG.h
View File

@ -181,7 +181,7 @@
* PE14 | 8 7 | PE12 PC5 | 8 7 | PF11
* PE10 6 5 | PE9 PC4 6 5 | PB15
* PE8 | 4 3 | PE7 PB2 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/

34
Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h
View File

@ -139,26 +139,26 @@
#endif
/**
* ----- -----
* 5V | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | PC3 (SD_DETECT) (LCD_D7) PB7 | 3 4 | PB6 (LCD_D6)
* (SD_MOSI) PA7 5 6 | PC11 (BTN_EN2) (LCD_D5) PB14 5 6 | PB13 (LCD_D4)
* (SD_SS) PA4 | 7 8 | PC10 (BTN_EN1) (LCD_RS) PB12 | 7 8 | PB15 (LCD_EN)
* (SD_SCK) PA5 | 9 10| PA6 (SD_MISO) (BTN_ENC) PC12 | 9 10| PC9 (BEEPER)
* ----- -----
* EXP2 EXP1
* ------ ------
* (SD_MISO) PA6 |10 9 | PA5 (SD_SCK) (BEEPER) PC9 |10 9 | PC12 (BTN_ENC)
* (BTN_EN1) PC10 | 8 7 | PA4 (SD_SS) (LCD_EN) PB15 | 8 7 | PB12 (LCD_RS)
* (BTN_EN2) PC11 6 5 | PA7 (SD_MOSI) (LCD_D4) PB13 6 5 | PB14 (LCD_D5)
* (SD_DETECT) PC3 | 4 3 | RESET (LCD_D6) PB6 | 4 3 | PB7 (LCD_D7)
* GND | 2 1 | 5V GND | 2 1 | 5V
* ------ ------
* EXP2 EXP1
*/
/**
* -----
* (BEEPER) PC9 | 1 2 | PC12 (BTN_ENC)
* (BTN_EN1) PC10 | 3 4 | PB14 (LCD_D5/MISO)
* (BTN_EN2) PC11 5 6 | PB13 (LCD_D4/SCK)
* (LCD_RS) PB12 | 7 8 | PB15 (LCD_EN/MOSI)
* GND | 9 10| 5V
* -----
* EXP3
*/
* ------
* 5V |10 9 | GND
* (LCD_EN/MOSI) PB15 | 8 7 | PB12 (LCD_RS)
* (LCD_D4/SCK) PB13 6 5 | PC11 (BTN_EN2)
* (LCD_D5/MISO) PB14 | 4 3 | PC10 (BTN_EN1)
* (BTN_ENC) PC12 | 2 1 | PC9 (BEEPER)
* ------
* EXP3
*/
#define EXP1_03_PIN PB7
#define EXP1_04_PIN PB6

2
Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
View File

@ -203,7 +203,7 @@
* PC11 | 8 7 | PD2 PC6 | 8 7 | PA4
* PC10 6 5 | PC12 PC7 6 5 | PA7
* PD0 | 4 3 | PD1 PB10 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 5V
* GND | 2 1 | 5V GND | 2 1 | 5V
* ------ ------
* EXP1 EXP2
*/

41
Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
View File

@ -239,7 +239,7 @@
* (LCD_EN) PE11 | 8 7 | PD10 (LCD_RS) (BTN_EN1) PE9 | 8 7 | PA4 (SPI1 CS)
* (LCD_D4) PD9 6 5 | PD8 (LCD_D5) (BTN_EN2) PE8 6 5 | PA7 (SPI1 MOSI)
* (LCD_D6) PE15 | 4 3 | PE7 (LCD_D7) (SPI1_RS) PB11 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
@ -261,25 +261,26 @@
#define EXP2_09_PIN PA5
#define EXP2_10_PIN PA6
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#define ENABLE_SPI3
#define SD_SS_PIN -1
#define SDSS PC9
#define SD_SCK_PIN PC10
#define SD_MISO_PIN PC11
#define SD_MOSI_PIN PC12
#define SD_DETECT_PIN PC4 // SD_DETECT_PIN doesn't work with NO_SD_HOST_DRIVE disabled
#elif SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS EXP2_07_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#if ENABLED(SDSUPPORT)
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#define ENABLE_SPI3
#define SD_SS_PIN -1
#define SDSS PC9
#define SD_SCK_PIN PC10
#define SD_MISO_PIN PC11
#define SD_MOSI_PIN PC12
#define SD_DETECT_PIN PC4 // SD_DETECT_PIN doesn't work with NO_SD_HOST_DRIVE disabled
#elif SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS EXP2_07_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
#endif
#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI)

36
Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_V2.h
View File

@ -184,12 +184,12 @@
//
/**
* ______
* 5V | 1 2 | GND
* PB15 | 3 4 | PB12
* PB13 | 5 6 PC5
* ---- | 7 8 | PC4
* PB0 | 9 10 | PA14
* ------
* PA14 |10 9 | PB0
* PC4 | 8 7 | --
* PC5 | 6 5 PB13
* PB12 | 4 3 | PB15
* GND | 2 1 | 5V
* ------
* EXP1
*
@ -209,12 +209,12 @@
#define EXP1_10_PIN PA14
#if ENABLED(CR10_STOCKDISPLAY)
/** ______
* 5V | 1 2 | GND
* LCD_EN | 3 4 | LCD_RS
* LCD_D4 | 5 6 EN2
* RESET | 7 8 | EN1
* ENC | 9 10 | BEEPER
/** ------
* BEEPER |10 9 | ENC
* EN1 | 8 7 | RESET
* EN2 | 6 5 LCD_D4
* LCD_RS | 4 3 | LCD_EN
* GND | 2 1 | 5V
* ------
*/
#ifdef DISABLE_JTAGSWD
@ -230,12 +230,12 @@
#define BOARD_ST7920_DELAY_3 750
#elif ENABLED(MKS_MINI_12864)
/** ______
* 5V | 1 2 | GND
* SPI-MOSI | 3 4 | SPI-CS
* A0 | 5 6 EN2
* -- | 7 8 | EN1
* ENC | 9 10 | SPI-SCK
/** ------
* SCK |10 9 | ENC
* EN1 | 8 7 | --
* EN2 | 6 5 A0
* CS | 4 3 | MOSI
* GND | 2 1 | 5V
* ------
*/
#define DOGLCD_CS EXP1_04_PIN