bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Bring some configs up to speed

Browse Source
This commit is contained in:
Scott Lahteine
2018-02-24 20:29:29 -06:00
parent 813f9f3082
commit 5684beae90
66 changed files with 386 additions and 75 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View File

@@ -1840,6 +1840,7 @@
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//

2
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@@ -697,7 +697,7 @@
#if ENABLED(BABYSTEPPING)
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.

26
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View File

@@ -100,12 +100,21 @@
/**
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting.
* Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
*
* :[0, 1, 2, 3, 4, 5, 6, 7]
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT 0
/**
* Select a secondary serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port -1 is the USB emulated serial port, if available.
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT_2 -1
/**
* This setting determines the communication speed of the printer.
*
@@ -1590,6 +1599,12 @@
// Enable one of the following options to specify your controller.
//
//
// Original RADDS LCD Display+Encoder+SDCardReader
// http://doku.radds.org/dokumentation/lcd-display/
//
//#define RADDS_DISPLAY
//
// ULTIMAKER Controller.
//
@@ -1819,6 +1834,13 @@
//#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
//
// AZSMZ 12864 LCD with SD
// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//

1
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View File

@@ -1838,6 +1838,7 @@
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//

10
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View File

@@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@@ -396,7 +396,7 @@
//#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440
// E3D-v6
#define DEFAULT_Kp 18.55
#define DEFAULT_Ki 2.71
@@ -441,13 +441,12 @@
//#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16
//HatchBox Alpha
#define DEFAULT_bedKp 72.11
#define DEFAULT_bedKi 7.1
#define DEFAULT_bedKd 488.31
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
@@ -1843,6 +1842,7 @@
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//

1
Marlin/src/config/examples/delta/generic/Configuration.h
View File

@@ -1827,6 +1827,7 @@
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//

1
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View File

@@ -1830,6 +1830,7 @@
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//

1
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View File

@@ -1830,6 +1830,7 @@
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//

1
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View File

@@ -1839,6 +1839,7 @@
//
//#define AZSMZ_12864
//
// Silvergate GLCD controller
// http://github.com/android444/Silvergate
//