Bring some configs up to speed

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -835,7 +835,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 //#define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -1381,9 +1381,8 @@
  * SD CARD: SPI SPEED
  *
  * Enable one of the following items for a slower SPI transfer speed.
- * This may be required to resolve "volume init" errors or LCD issues.
+ * This may be required to resolve "volume init" errors.
  */
-
 //#define SPI_SPEED SPI_HALF_SPEED
 //#define SPI_SPEED SPI_QUARTER_SPEED
 //#define SPI_SPEED SPI_EIGHTH_SPEED
@@ -1482,7 +1481,6 @@
 //
 //#define ULTIPANEL
 
-
 //
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
@@ -1642,7 +1640,6 @@
 //
 // SSD1306 OLED full graphics generic display
 //
-//#define U8GLIB_ST7920
 //#define U8GLIB_SSD1306
 
 //
@@ -1673,12 +1670,43 @@
 //
 //#define OLED_PANEL_TINYBOY2
 
+//
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
+//
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
+
+//
+// MKS MINI12864 with graphic controller and SD support
+// http://reprap.org/wiki/MKS_MINI_12864
+//
+//#define MKS_MINI_12864
+
+//
+// Factory display for Creality CR-10
+// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
+//
+// This is RAMPS-compatible using a single 10-pin connector.
+// (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
+//
+//#define CR10_STOCKDISPLAY
+
+//
+// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
+// http://reprap.org/wiki/MKS_12864OLED
+//
+// Tiny, but very sharp OLED display
+//
+//#define MKS_12864OLED          // Uses the SH1106 controller (default)
+//#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
+
 //
 // AZSMZ 12864 LCD with SD
 // https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
 //
 //#define AZSMZ_12864
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //