bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

UltraLCD enhancements (lower fan resolution, backlash menu) (#13519)

Browse Source
This commit is contained in:
Marcio Teixeira
2019-03-29 13:07:43 -06:00
committed by Scott Lahteine
parent de0f35f2d9
commit 5679fae11e
13 changed files with 123 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Marlin/src/gcode/calibrate/G425.cpp
View File

@ -56,7 +56,8 @@
#define HAS_Y_CENTER BOTH(CALIBRATION_MEASURE_FRONT, CALIBRATION_MEASURE_BACK)
#if ENABLED(BACKLASH_GCODE)
extern float backlash_distance_mm[], backlash_correction, backlash_smoothing_mm;
extern float backlash_distance_mm[], backlash_smoothing_mm;
extern uint8_t backlash_correction;
#endif
enum side_t : uint8_t { TOP, RIGHT, FRONT, LEFT, BACK, NUM_SIDES };
@ -446,7 +447,7 @@ inline void calibrate_backlash(measurements_t &m, const float uncertainty) {
{
// New scope for TEMPORARY_BACKLASH_CORRECTION
TEMPORARY_BACKLASH_CORRECTION(0.0f);
TEMPORARY_BACKLASH_CORRECTION(all_off);
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
probe_sides(m, uncertainty);
@ -478,7 +479,7 @@ inline void calibrate_backlash(measurements_t &m, const float uncertainty) {
{
// New scope for TEMPORARY_BACKLASH_CORRECTION
TEMPORARY_BACKLASH_CORRECTION(1.0f);
TEMPORARY_BACKLASH_CORRECTION(all_on);
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
move_to(
X_AXIS, current_position[X_AXIS] + 3,
@ -513,7 +514,7 @@ inline void update_measurements(measurements_t &m, const AxisEnum axis) {
* - Call calibrate_backlash() beforehand for best accuracy
*/
inline void calibrate_toolhead(measurements_t &m, const float uncertainty, const uint8_t extruder) {
TEMPORARY_BACKLASH_CORRECTION(1.0f);
TEMPORARY_BACKLASH_CORRECTION(all_on);
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
#if HOTENDS > 1
@ -556,7 +557,7 @@ inline void calibrate_toolhead(measurements_t &m, const float uncertainty, const
* uncertainty in - How far away from the object to begin probing
*/
inline void calibrate_all_toolheads(measurements_t &m, const float uncertainty) {
TEMPORARY_BACKLASH_CORRECTION(1.0f);
TEMPORARY_BACKLASH_CORRECTION(all_on);
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
HOTEND_LOOP() calibrate_toolhead(m, uncertainty, e);
@ -588,7 +589,7 @@ inline void calibrate_all() {
reset_hotend_offsets();
#endif
TEMPORARY_BACKLASH_CORRECTION(1.0f);
TEMPORARY_BACKLASH_CORRECTION(all_on);
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
// Do a fast and rough calibration of the toolheads